Optics Mock Test – NEET Physics
GKaim: Measure | Improve | Achieve

Optics Mock Test – NEET Physics

Progressive Test — Guest First Round

0%

Optics – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Two very large parallel plane mirrors face one another in a homogeneous medium in which light travels at . Their perpendicular separation is . A narrow monochromatic plane-wave beam travels upwards and to the right, making with the mirror normals. It reflects first from the upper mirror, then from the lower mirror, and continues upwards and to the right. Assume both reflections occur without clipping and the mirrors are stationary. Which statement correctly gives the final propagation direction, the shortest perpendicular separation between the initial incident ray line and the ray line emerging after the two reflections, and the time between the two reflection events?

2 / 50

2. A compound microscope consists of a convex objective of focal length and a convex eyepiece of focal length . A small upright specimen is fixed in front of the objective. Initially, the microscope is in normal adjustment and produces its final image at infinity.
The eyepiece is then moved farther from the fixed objective, without moving the specimen or objective. The lenses remain coaxial and thin, and the relevant rays are unobstructed.
Which statement correctly identifies the new final image position and its nature and orientation relative to the original specimen?

3 / 50

3. Two equally illuminated coherent slits produce a Young's interference pattern on a distant screen. A point detector measures the intensity at the geometrical centre and at two other positions separated from it by a quarter and half of the known fringe width .
The slits have equal individual intensity , but an unknown fixed initial phase difference is present. Define the positive screen direction so that the geometrical path difference contributes to the total relative phase.
The measured results are:

Screen coordinate Measured intensity

Which statement correctly identifies the initial phase difference in the range and the nearest bright-fringe position relative to the geometrical centre?

4 / 50

4. A straight rectangular optical guide has a transparent core of refractive index . Its upper horizontal boundary is in contact with cladding of refractive index , while its lower horizontal boundary is in contact with a different cladding of refractive index . A meridional ray enters from air through a vertical end face with , initially travels upwards inside the core and reaches the upper boundary. The two horizontal boundaries are parallel. Which statement correctly describes its subsequent behaviour?

5 / 50

5. A thin symmetric double-convex glass lens has refractive index . A narrow paraxial ray travels from left to right, parallel to the principal axis, and strikes the lens above its optical centre.
In air, the refracted ray crosses the principal axis beyond the lens.
The lens is then immersed in an unknown transparent liquid. In the liquid, the same incident parallel ray emerges diverging, and its backward extension meets the principal axis in front of the lens.
A real object is subsequently placed in front of the immersed lens.

The thin lens remains centred at x = 0 throughout. In air, a ray incident parallel to the x-axis at a small positive height refracts downwards and crosses the axis at x = +15 cm. In the unknown liquid, the corresponding refracted ray travels away from the axis; when extended backwards, it meets the axis at x = −30 cm. The glass material and both lens surface curvatures are unchanged.

Which statement correctly identifies the liquid refractive index and the final object's image?

6 / 50

6. A monochromatic light ray of wavelength in air enters a plane-parallel glass slab of refractive index . Beyond the slab is water of refractive index , rather than air. Both slab faces are plane and parallel, and the air-glass incidence angle satisfies . The ray propagates through the glass and emerges into the water without total internal reflection. Which statement correctly compares the sine of the ray angle in glass, the sine of its final angle in water, and the wavelengths in these two media?

7 / 50

7. A narrow beam containing red and violet light is incident obliquely from air on a plane-parallel slab. For the two colours, the slab has refractive indices and , respectively, with . Both colours enter the slab, undergo refraction at its two parallel faces and emerge back into air. The slab thickness and initial incidence angle are identical for the two colours. Which statement is correct?

8 / 50

8. A narrow monochromatic beam passes through a prism of refracting angle and refractive index in air. A very large flat screen is perpendicular to the original incident direction and located from the prism's effective ray-deflection point. In experiment P, the prism is oriented with its base above the incident direction, and the ray is adjusted to minimum deviation. In experiment Q, the prism is oppositely oriented with its base below the incident direction, and the incident ray is again adjusted relative to the prism to obtain minimum deviation. The original incident propagation direction in the laboratory is taken as the common reference direction for the two experiments. Assume the effective deflection point is the same in both trials and neglect prism thickness. What is the physical separation of the two spot positions on the screen?

9 / 50

9. Two mutually coherent monochromatic beams of identical polarization overlap in an interference experiment. Their individual intensities and are unknown, but they remain constant as the relative phase is varied. The measured maximum and minimum resultant intensities are and , respectively.
The experimentalist subsequently sets the phase difference to and then blocks the stronger beam without changing the weaker beam's intensity.
Which statement correctly determines the original individual intensities, the fringe visibility, and the detector intensities in these last two observations?

10 / 50

10. A narrow slit of width is illuminated normally by monochromatic light of wavelength . A detector can scan the entire physically accessible transmitted angular region on one side of the central diffraction maximum. No small-angle approximation is imposed.
The experimentalist attempts to identify the first, second and third single-slit diffraction minima using the usual minimum condition.
Which statement correctly identifies the possible minimum orders, their sine values, and why the remaining proposed order cannot occur?

11 / 50

11. Two straight optical-fibre sections, A and B, are joined end-to-end with their axes aligned and their flat core-core interface perpendicular to the common axis. Section A has a core refractive index of ; section B has a core refractive index of . Both sections have cladding of refractive index . A meridional ray enters section A from air through its flat input face at an angle to the axis satisfying . Assume the ray reaches the junction and then a side boundary in section B, without scattering or additional optical components. Which statement correctly describes the ray?

12 / 50

12. A Young's double-slit experiment uses monochromatic light of wavelength and a screen from the slit plane. Initially, the upper slit S₁ has transverse coordinate , and the lower slit S₂ has coordinate . A normally incident coherent plane wave illuminates them, producing a central bright fringe at . The lower slit is kept fixed, while the upper slit is moved to . The slits remain mutually coherent. Which statement correctly describes the new fringe width, the new zero-path-difference bright-fringe coordinate, and the intensity classification at the fixed point ?

13 / 50

13. A real object and a screen are fixed apart. A thin convex lens is moved between them along their common principal axis. Two distinct positions of the lens produce sharp real images on the same fixed screen. The separation between these two lens positions is . What is the focal length of the lens, and what is the ratio of the larger to the smaller image-height magnitudes?

14 / 50

14. A thin plano-convex lens is made of glass of refractive index and is used in air. Its spherical surface has radius-of-curvature magnitude .
In trial P, the plane surface faces the incident light. In trial Q, the lens is turned around so that the curved surface faces the incident light. In trial R, the lens is replaced by another plano-convex lens made of the same glass, but its curved surface has radius magnitude .
A real object is placed in front of the lens in every trial.
Which statement correctly describes the effect of reversing the original lens and the image obtained with the replacement lens in trial R?

15 / 50

15. Two designs for a reflecting astronomical telescope are described below.

Design P: A large concave primary mirror receives nearly parallel light from a distant object. Before the reflected converging beam reaches the primary focus, a small plane mirror inclined at to the incoming optical axis redirects it sideways towards an eyepiece. Design Q: A large concave primary mirror has a central opening. A smaller convex secondary mirror reflects the converging beam back through that opening towards an eyepiece behind the primary.

Match the following observations with their physical interpretations.
List I:
(P) The main focusing element in both designs.
(Q) The element responsible for the sideways redirection in Design P.
(R) The optical arrangement involving a convex secondary and an opening through the primary.
(S) An optical advantage common to the two designs compared with an ordinary single-glass-lens refracting objective.
List II:
(1) Newtonian reflecting-telescope redirection.
(2) Cassegrain reflecting-telescope arrangement.
(3) Concave primary mirror.
(4) Avoidance of the primary objective's dispersion-induced chromatic focal shift.
Choose the correct matching.

16 / 50

16. Two straight step-index optical fibres, P and Q, are tested in air. Fibre P has core refractive index and cladding refractive index . Fibre Q has core refractive index and cladding refractive index . Each fibre has a flat input face perpendicular to its axis. Which statement correctly compares their maximum meridional entrance acceptance angles, their internal core-cladding critical angles and their propagation speeds?

17 / 50

17. A narrow single slit of width is illuminated simultaneously by normally incident red and violet monochromatic plane waves of wavelengths and , respectively. Each colour produces its own single-slit diffraction pattern on a screen away. The two patterns are examined separately using colour-sensitive detectors. Assume small diffraction angles. Which statement correctly gives the nearest noncentral position at which a red diffraction minimum coincides with a violet diffraction minimum, and the respective full central-maximum widths?

18 / 50

18. Two mutually coherent monochromatic beams of equal individual intensity overlap on an observation screen. Their linear polarization directions make an angle of with each other, and their relative optical phase varies across the screen.
Initially, the overlap is observed directly with a polarization-insensitive detector. Subsequently, a common ideal Polaroid analyzer is placed after the beams overlap, with its transmission axis along the angular bisector of their polarization directions. Neither beam's coherence nor the spatial rate of phase variation changes.
Which statement correctly compares the interference visibility and maximum intensity before and after inserting the analyzer?

19 / 50

19. A concave spherical mirror has focal length and initially has its pole at laboratory coordinate . A real point object remains fixed at , with light incident from left to right. In the initial arrangement, the mirror forms a real image at . The mirror is then translated along the common principal axis without rotating it or changing its focal length. The experimenter finds a second, distinct position of the mirror at which the image again has the same laboratory coordinate .
Which statement correctly gives the new mirror coordinate and the nature and magnification of the second image?

20 / 50

20. An astronomical refracting telescope is constructed from two positive thin lenses in normal adjustment. Its original objective-eyepiece separation is , and its angular magnifying-power magnitude is . A new telescope is to be assembled using different positive objective and eyepiece lenses, but it must retain exactly the same normal-adjustment separation of while doubling the angular magnifying-power magnitude. Which pair correctly gives the required new focal lengths?

21 / 50

21. A small specimen is initially to the left of a convex microscope objective of focal length . The objective is at laboratory coordinate , and a convex eyepiece of focal length is initially at . The final image is initially at infinity. The objective is then translated to the right, towards the fixed specimen, without moving the eyepiece or the specimen. The eyepiece is subsequently repositioned to restore a final image at infinity. Which statement correctly gives the required eyepiece movement and the change in the magnitude of the objective's transverse magnification?

22 / 50

22. A normally incident monochromatic plane wave of wavelength illuminates a long, narrow rectangular slit of width . A screen away records the single-slit diffraction pattern. The slit is initially vertical, so its narrow width lies horizontally. It is then rotated through about the central beam axis, so that its narrow width lies vertically, while its centre remains fixed. A detector stays at screen coordinate .

Arrangement P: The long direction of the slit is vertical and its narrow width is horizontal. Arrangement Q: The slit is rotated in its own plane through 90 degrees, so its long direction is horizontal and its narrow width is vertical. In both arrangements, the detector remains 5.0 mm to the right and 2.5 mm above the central axis. The long dimension of the slit is sufficiently large that diffraction in that direction is negligible over the examined region.

Which statement correctly classifies the detector in the two arrangements?

23 / 50

23. A two-convex-lens astronomical telescope has an objective of focal length and an eyepiece of focal length . It is initially in normal adjustment while viewing a very distant object. The observer subsequently adjusts the eyepiece alone so that the final image is virtual at the normal near-point distance from the eyepiece, rather than at infinity. The objective remains fixed and its intermediate image remains at its focal plane.
Which statement correctly gives the required eyepiece movement, final objective-eyepiece separation and change in angular magnifying-power magnitude?

24 / 50

24. A monochromatic wave travels normally through a transparent plate consisting of three bonded, plane-parallel homogeneous layers. The layer data are given below.

Layer Thickness Refractive index
P
Q
R

A marked plane wavefront enters P at . At , where is this wavefront, and how long after that instant will it take to emerge from the complete plate? Take . Neglect reflection and assume the layers are stationary.

25 / 50

25. An unpolarized monochromatic beam is incident from air on a smooth plane glass surface of refractive index . The incidence angle is adjusted to the Brewster angle, and an ideal analyzer whose transmission axis lies in the plane of incidence extinguishes the reflected beam. The glass is then immersed in a transparent liquid of refractive index . The refractive index of the glass remains unchanged, and the same incident plane is maintained. Initially, the incidence angle is kept at its original value.
Which statement correctly predicts the analyzer observation and the adjustment required to restore complete polarization of the reflected beam?

26 / 50

26. A monochromatic ray travels through the principal section of a triangular glass prism having refracting angle . Its incidence and emergence angles in air are initially equal, and the measured deviation is . The same prism is then turned slightly so that the incidence angle decreases while ordinary transmission through both faces continues. Consider the following Assertion and Reason.
Assertion (A): The deviation must increase from its initial value for a sufficiently small non-zero rotation away from the original symmetric path.
Reason (R): For the same wavelength and prism geometry, equality of the incidence and emergence angles identifies the minimum-deviation path; decreasing one of these angles destroys the internal symmetry and produces a larger deviation.
Choose the correct option.

27 / 50

27. A Young's double-slit arrangement is illuminated by a coherent normally incident plane wave of wavelength . The two slit centres initially lie along the vertical direction, separated by . A screen is parallel to the slit plane at distance , and the original fringe width measured along the vertical screen axis is .
The entire slit pair is now rotated through in its own plane about its midpoint, without changing the distance between the slit centres or the incident illumination. The screen has horizontal coordinate and vertical coordinate .

Initially, the upper and lower slits are separated vertically, producing straight horizontal interference fringes on a parallel screen. After rotation, the line joining the slit centres makes 45 degrees with the positive x-axis and 45 degrees with the positive y-axis. The slit midpoint remains opposite the screen origin. The fringes are the loci of constant path difference in the paraxial observation region.

Which statement correctly describes the rotated pattern and the separations between consecutive bright fringes measured along horizontal and vertical screen scans through the origin?

28 / 50

28. A student rotates a triangular glass prism slowly while maintaining the direction of a monochromatic incident beam. During a range of orientations, the ray continues to enter through the first face and emerge ordinarily through the second. The prism and wavelength remain unchanged.

The horizontal axis represents the angle of incidence at the first face. One graph shows the emergence angle at the second face. A second graph shows the total prism deviation . Both angles are measured relative to the appropriate local surface normals, and the prism angle is constant. The accessible incidence range contains the symmetric minimum-deviation path.

Which statement correctly describes the qualitative variations as the entrance incidence angle increases through the minimum-deviation condition?

29 / 50

29. Two observers use the same simple microscope, consisting of a convex lens of focal length .
Observer P has a least distance of distinct vision of , while observer Q has a least distance of distinct vision of .
Both observers view the same small object of height . In each trial, the object is placed at the microscope's focal point so that the final image is at infinity.
Assume the eye is close to the lens and small-angle approximations apply.
Which statement correctly compares the angular size produced by the microscope and the quoted magnifying powers for the two observers?

30 / 50

30. An unpolarized monochromatic beam of intensity passes through three ideal Polaroids. The first and last have transmission axes at and , respectively, measured counterclockwise from vertical. The intermediate Polaroid can be placed with its axis either at or at . All three axes are measured from the same fixed reference, and the Polaroids remain in the stated propagation order.
Which statement correctly compares the transmitted intensities in the two intermediate-axis configurations?

31 / 50

31. A compound microscope has a convex eyepiece of focal length and a fixed objective-eyepiece separation of . Initially, the objective has focal length . It is then replaced by another convex objective of focal length , placed at the same objective position. In each arrangement, the specimen is independently repositioned so that the final image is at infinity. The observer's least distance of distinct vision is . Which statement correctly compares the required specimen distances from the objectives and the angular magnifying-power magnitudes?

32 / 50

32. A single convex spherical refracting surface separates air on the left from a transparent liquid on the right. Its pole is at , and its centre of curvature is at .
A real point object remains fixed at . In trial P, the refractive index of the liquid is . In trial Q, the liquid is replaced by another transparent medium of refractive index , without changing the object position or surface curvature.
Assume paraxial refraction, with light travelling from left to right.

The spherical interface has its pole at x = 0 and centre of curvature at x = +20 cm. The object lies at x = −60 cm in air. The refracted region is to the right of the interface. The surface geometry remains fixed when the second-medium refractive index is changed.

Which statement correctly identifies the two image positions and the refractive index of the second medium for which the refracted rays would become parallel?

33 / 50

33. Two smooth dielectric reflecting surfaces are arranged so that a monochromatic beam encounters each surface at its respective Brewster angle. The first incident beam is unpolarized. The reflected beam from the first surface is directed towards the second surface. Two alternative arrangements of the second surface are possible.

Arrangement P: The planes of incidence at the first and second reflecting surfaces coincide. Arrangement Q: The plane of incidence at the second surface is perpendicular to the first plane of incidence. In both arrangements, the beam from the first reflection reaches the second surface at its Brewster angle. Both surfaces are ordinary transparent isotropic dielectric interfaces. The first reflected beam is assumed to have nonzero intensity.

Which statement correctly predicts the presence of a second reflected beam under the ideal Brewster-angle model?

34 / 50

34. A convex lens and a concave lens are placed separately in air. Both have focal-length magnitudes of . The same real object is placed to the left of each lens, and light travels from left to right. Which pair correctly gives the signed linear magnifications of the images formed by the convex and concave lenses, respectively?

35 / 50

35. A Young's double-slit apparatus uses light of initially unknown wavelength. Its slit separation is , and the screen is away.
A transparent plate of thickness is placed normally in the upper slit path. The lower slit path remains entirely in air. The illuminating plane wave initially reaches the two slits in phase.
A screen photograph gives the following bright-fringe positions, measured upwards from the geometrical centre:

Consecutive bright fringe Screen position
P
Q
R
S
T

The experimenter independently verifies that R is the central-order bright fringe, where the geometrical path difference exactly compensates the plate's additional optical path. The plate produces the smallest positive optical-path addition consistent with this central-order shift.
Which statement correctly determines the wavelength, the plate refractive index and the effect of removing the plate?

36 / 50

36. A refracting astronomical telescope is used to observe a distant extended object. Its convex objective has a circular clear aperture and forms a real intermediate image near its focal plane. A student then covers the upper half of the objective aperture with an opaque screen, without changing the objective focal length, the eyepiece position or the direction of the telescope.
Assertion (A): The observer can still see the complete image of the distant object, although its brightness is reduced; the upper half of the image does not simply disappear.
Reason (R): Every small region of an ideal objective aperture can receive rays from different points of the distant object and contribute to forming the whole image, so blocking half the aperture primarily reduces the light contributing to each image point.
Choose the correct option.

37 / 50

37. A ray propagates along the core of a step-index optical fibre of refractive index , surrounded by cladding of refractive index . In a straight section, the ray strikes the core-cladding boundary at an incidence angle of , measured from the local normal. A curved section changes the local boundary orientation so that the same ray encounters the boundary at . Assume these angles are known from the geometrical ray path.
The cladding is then replaced by a transparent material of refractive index , without changing the core, the stated incidence angles or the fibre geometry. Which statement correctly describes the ray's behaviour?

38 / 50

38. A fixed narrow incident ray strikes a small plane mirror mounted on a rotatable support. Initially, the reflected ray travels horizontally towards the right and strikes a vertical screen at its centre. The screen is horizontally from the point of reflection. The mirror is rotated counterclockwise through an unknown small angle , without moving its point of reflection. The incident ray remains fixed. After rotation, the reflected ray strikes the same screen above its original point. Assume the entire arrangement lies in one vertical plane and the reflected beam remains directed towards the screen.
Which statement correctly gives the exact mirror rotation and its approximate magnitude?

39 / 50

39. A plane-parallel glass slab has refractive index . A ray enters its first face from an external medium and travels through the slab towards the second parallel face.
In experiment P, both external media are air. The incident ray enters the first face at an angle less than , so an ordinary transmitted ray exists inside the glass.
In experiment Q, the first external medium is water of refractive index , while the medium beyond the second face remains air. The ray enters from water at to the first-face normal.

A uniform glass slab has two parallel plane faces, with their normals parallel. In P, air lies on both sides. In Q, water lies before the first face and air beyond the second. The ray reaches the second face without meeting any other boundary. Its internal incidence angle at the second face equals its refraction angle at the first face.

Which statement correctly compares the possibility of total internal reflection at the second face?

40 / 50

40. A thin symmetric double-convex lens is made from a transparent material of unknown refractive index. Its optical power is measured as in air and when completely immersed in a liquid of refractive index . The shape and surface curvature radii remain unchanged. What are the refractive index of the lens material and the magnitude of either surface radius?

41 / 50

41. A thin convex lens has focal length and forms a sharp image of a real object on a screen. Initially, the object is in front of the lens and the image is behind it.
The object-lens and lens-screen distances are then both increased by the same factor , while the object height remains unchanged.
The original convex lens stays in place relative to the expanded optical bench arrangement. To restore a sharp image on the newly positioned screen, a second thin lens is placed in contact with it.
Which statement correctly gives the power required of the added lens and the final signed transverse magnification?

42 / 50

42. The signed transverse magnification of a fixed spherical mirror is measured for different real-object positions on its principal axis. A graph is prepared with signed object distance , in centimetres, on the horizontal axis and reciprocal magnification on the vertical axis.

The experimental points lie on a straight line through (u = -30 cm, 1/m = -0.5) and (u = -10 cm, 1/m = +0.5). The graph crosses the vertical axis at 1/m = +1. Distances follow the Cartesian sign convention, and the same spherical mirror is used throughout.

An object is then placed so that its image is real, inverted and one-half its height. Which statement correctly gives the mirror type, its radius-of-curvature magnitude, the required object distance and the image distance?

43 / 50

43. An optical beam consists of two mutually incoherent components travelling in the same direction: one is completely linearly polarized, and the other is unpolarized. The beam passes through an ideal rotating analyzer. The measured transmitted intensity varies between a maximum of and a minimum of . The direction of complete polarization is fixed during measurement, and both components have constant incident intensities. Which statement correctly determines the incident intensities of the polarized and unpolarized components, their total incident intensity, and the transmitted intensity when the analyzer makes with the polarization direction?

44 / 50

44. Two equal-intensity coherent beams produce a Young's interference pattern with individual slit intensities . A phase controller adds either zero or to the relative phase between the beams.
During a long exposure, the controller maintains the zero-additional-phase state for three-quarters of the exposure and the -shifted state for the remaining quarter. Switching occurs many times, and the detector records the time-averaged intensity at each screen position.
The controller is then adjusted to spend equal time in the two phase states, without changing either beam's intensity.
Which statement correctly compares the maximum, minimum and visibility of the recorded patterns in the two operating modes?

45 / 50

45. Two independent diffraction observations are made using the same wavelength . In experiment P, a single slit of width is observed on a screen away. In experiment Q, a different single slit is placed before a convex lens of focal length , and its Fraunhofer pattern is recorded in the lens's back focal plane. The full central widths in P and Q are measured to be and , respectively. Which statement correctly compares the slit widths and their first-minimum angular positions?

46 / 50

46. A Young's double-slit apparatus initially uses two equally illuminated coherent slits and gives maximum intensity and minimum intensity zero. An adjustable attenuator is then inserted into one slit path. It reduces that slit beam's separate intensity to one-quarter of its original value but introduces no additional phase. Independently, a uniform incoherent background of intensity is added to the screen. The slit separation, wavelength, and screen distance remain unchanged. Which statement correctly gives the final maximum intensity, minimum intensity, and fringe visibility?

47 / 50

47. A normally incident monochromatic beam of wavelength and unpolarized intensity illuminates a single slit of width .
The far-field diffraction pattern is observed on a screen from the slit.
In trial P, an ideal Polaroid whose transmission axis is vertical is placed before the slit. A second ideal Polaroid, acting as an analyzer, is placed after the slit with its transmission axis to the vertical.
In trial Q, the analyzer is rotated to relative to the first Polaroid; the slit, wavelength, screen distance and first Polaroid remain unchanged.
Assume the slit does not alter the polarization direction and that the Polaroids uniformly attenuate the optical field across the aperture.
Which statement correctly compares the observed diffraction patterns?

48 / 50

48. An unknown spherical refracting surface separates medium P of refractive index on the left from medium Q of unknown refractive index on the right. Light travels from left to right. A real object is placed to the left of the pole and produces a real image to the right with signed transverse magnification . Which pair correctly gives the refractive index of Q and the signed radius of curvature?

49 / 50

49. A ray travels inside a straight transparent slab of refractive index . Its plane upper surface is in contact with an external medium whose refractive index can be changed. The internal ray makes an angle of with the surface normal.
A student prepares the following classification table.

External refractive index Student's classification
Total internal reflection
Total internal reflection
Ordinary refraction
Total internal reflection

Given , which statement correctly audits the table?

50 / 50

50. A monochromatic plane wave travels obliquely from a homogeneous medium P into a homogeneous medium Q through a stationary plane interface. Its propagation speed is smaller in Q than in P. The incident and transmitted wavefronts are observed near the boundary.
Assertion (A): The transmitted plane wavefronts make a smaller acute angle with the interface than the incident plane wavefronts, although the frequency remains unchanged.
Reason (R): Huygens' construction produces a transmitted wavefront whose inclination depends on the secondary-wavelet speed in Q; when that speed is smaller, the transmitted-ray normal bends towards the interface normal, while the stationary boundary preserves the oscillation frequency.
Choose the correct option.

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top