Chemical Thermodynamics Mock Test – NEET Chemistry
GKaim: Measure | Improve | Achieve

Chemical Thermodynamics Mock Test – NEET Chemistry

Progressive Test — Guest First Round

0%

Chemical Thermodynamics – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Sodium hydrogen carbonate undergoes thermal decomposition:

The standard formation enthalpies at 298 K are:

Substance ()
-948
-1131
-394
-242

A rigid bomb calorimeter at 298 K contains 0.300 mol of sodium hydrogen carbonate, which decomposes completely.
Assume ideal-gas behaviour, negligible condensed-phase pressure-volume contributions and compatible thermochemical conditions.
Use

with .
Which pair correctly gives the reaction enthalpy per balanced equation and the heat absorbed by the reacting sample at constant volume?

2 / 50

2. A gaseous reaction is carried out in a closed piston-cylinder:

Exactly 0.400 mol of A reacts completely at 300 K.
The measured reaction internal-energy change for the balanced equation as written is

Assume ideal-gas behaviour, constant temperature and pressure, only pressure-volume work and no phase changes.
A student argues that the constant-pressure heat must differ from the constant-volume heat because the identity of the gaseous molecules changes.
Which conclusion is correct?

3 / 50

3. At 298 K, the molar enthalpy of neutralisation of a strong monoprotic acid by aqueous sodium hydroxide is . Under compatible conditions, neutralisation of a weak monoprotic acid HA by the same base has an enthalpy of .
In two separate experiments, 0.200 mol of acid is completely neutralised in an insulated calorimeter with effective heat capacity . All initial temperatures and solution conditions are identical. Assume complete neutralisation, negligible temperature dependence of the enthalpies and no other energetic contributions.
Which pair correctly gives the enthalpy change for ionisation of HA into aqueous ions and the difference between the calorimeter temperature rises, ?

4 / 50

4. A thermodynamic system consists of a gas confined below a frictionless movable piston. Two successive processes are performed.
Stage I: The gas expands at a constant external pressure of , increasing its volume from 4.00 L to 7.00 L.
Stage II: The piston is locked at 7.00 L, and the gas receives 500 J of heat.
During Stage I, the gas absorbs 1000 J of heat. Assume only pressure-volume work occurs, and use

Which pair correctly gives the total internal-energy change and the thermodynamic classification of Stage II?

5 / 50

5. A closed thermodynamic system is taken from equilibrium state A to equilibrium state B along path I. During this process, the system absorbs of heat and performs of work on its surroundings. It is then taken independently from the same state A to the same state B along path II, during which the system performs of work. What heat must be absorbed along path II? Use the chemistry sign convention.

6 / 50

6. At 300 K, a hypothetical chemical reaction has the following standard thermodynamic quantities:


For a particular nonequilibrium mixture, the dimensionless reaction quotient is

Use

and

Take and .
Which pair correctly gives the approximate equilibrium constant and the actual reaction Gibbs-energy change in the specified mixture?

7 / 50

7. Consider the following processes and the corresponding thermodynamic statements.

Process Statement
P. Reversible isothermal expansion of an ideal gas 1. Entropy of the gas may increase while its internal energy remains unchanged
Q. Spontaneous freezing of a supercooled liquid 2. The system may experience a decrease in entropy while the entropy of the universe increases
R. Reversible melting at the equilibrium melting temperature 3. The entropy gained by the substance is exactly balanced by entropy lost by its surroundings
S. Irreversible adiabatic free expansion of an ideal gas 4. The entropy of the gas increases through internal entropy production without external heat transfer

The statements are intended to identify the most distinctive thermodynamic feature of each process. Which matching is correct?

8 / 50

8. A constant-volume calorimeter contains a reaction vessel and an external calorimetric assembly whose effective heat capacity is . Complete conversion according to

raises the assembly temperature by 4.0 K. Exactly of reacts, with oxygen present in excess. The measured initial and final reaction states are compared at 300 K. Assume ideal-gas behaviour, no external heat loss, only pressure-volume work, and negligible additional energy contributions. What is the reaction enthalpy per mole of reaction as written? Use .

9 / 50

9. A hypothetical ionic compound is formed from its elements and can subsequently dissolve in water. The following enthalpy changes are known at the same reference temperature:


A separate solution-formation process begins with 0.250 mol of A(s) and 0.125 mol of , which first react completely to form solid AB. All the solid then dissolves in sufficient water, producing the same specified aqueous-ion state. No other reactions occur.
What are the overall enthalpy change and the amount of solid AB formed in the intermediate step?

10 / 50

10. An ideal-gas mixture P contains mol of gas A and mol of gas B. Mixture Q is prepared with mol of A and mol of B, while mixture R contains mol of A and mol of B. All three mixtures are at the same temperature and pressure. The gases do not react, and their molar masses are different. Which relationship between their densities must hold?

11 / 50

11. Three thermochemical pathways connect the same reactant state A to product state D. Their measured enthalpy changes are shown below.

A reaction-network diagram contains four chemical states A, B, C and D. Pathway I consists of A B with enthalpy change , followed by B D with enthalpy change . Pathway II consists of A C with enthalpy change , followed by C D with an unknown enthalpy change x. A direct pathway from A to D is also shown. All thermochemical values refer to the same stoichiometric amount and compatible conditions.

A fourth experiment converts C into B. Which pair gives the enthalpy changes for C D and C B?

12 / 50

12. Match List I with List II for heating processes involving fixed amounts of ideal gases. Assume constant heat capacities and only pressure-volume work.

List I List II
P. Total heat capacity at constant volume 1.
Q. Molar heat capacity at constant pressure 2.
R. Difference between molar heat capacities 3.
S. Difference between total heat capacities 4.

Which option contains the correct matching?

13 / 50

13. A reaction is studied in an insulated calorimeter having an effective heat capacity of .
A small, reproducible amount of heat is generated during each run by the experimental procedure itself. This background contribution is independent of the amount of reactant used.
The reaction is exothermic, and two experiments give:

Run Amount reacted Observed temperature rise
P 0.100 mol 5.00 K
Q 0.200 mol 9.00 K

Assume the molar reaction enthalpy remains constant and the background heat contribution is identical in both runs.
Which pair correctly gives the molar reaction enthalpy and the background heat generated in each run?

14 / 50

14. A fixed amount of ideal gas initially at temperature and volume undergoes the following two processes:
Stage 1: The gas is compressed adiabatically, raising its temperature to , where .
Stage 2: The gas is allowed to expand isothermally at until its volume again becomes .
Only pressure-volume work is involved. Which statement correctly describes the final internal energy and the heat exchanged during Stage 2?

15 / 50

15. At a certain temperature and pressure, the standard Gibbs-energy change for

is .
A second process forms a liquid product:

Its standard Gibbs-energy change is under compatible conditions.
For the combined reaction

which conclusion is correct?

16 / 50

16. Two separate samples each contain 1.50 mol of the same ideal gas, initially in identical states at 250 K.
Experiment P heats one sample reversibly at constant pressure to 500 K.
Experiment Q heats the other sample reversibly at constant volume to 500 K.
The gas has

and

Assume constant heat capacities and ideal-gas behaviour.
For the entropy changes, use


Take and .
Which pair correctly gives and ?

17 / 50

17. A hypothetical dibasic acid is neutralised in two successive steps:




A solution initially contains 0.150 mol of . Exactly 0.220 mol of hydroxide ions is added.
Assume the first neutralisation step goes to completion before the second begins, all added hydroxide is consumed, and no other reactions or heat effects occur.
Which pair correctly gives the total neutralisation enthalpy and the final mole ratio

18 / 50

18. At 300 K, the following standard formation enthalpies are provided:



Consider two reactions:


Which pair correctly gives their reaction enthalpies?

19 / 50

19. A closed reacting system is maintained at constant temperature and pressure while the reaction

approaches equilibrium.
The total Gibbs energy of the system is represented by the following graph.

The horizontal axis represents forward reaction extent , in moles. The vertical axis represents the total Gibbs energy G of the system. The curve is smooth and U-shaped, decreasing from to a unique minimum at , then increasing from that minimum to . Points P, E and Q lie on the curve at extents 0.200 mol, 0.400 mol and 0.600 mol, respectively. The system remains at the same temperature and pressure throughout.

Consider the following statements.
Statement I: At P, a small forward reaction advancement lowers the total Gibbs energy.
Statement II: At Q, a small forward reaction advancement lowers the total Gibbs energy.
Statement III: At E, the actual reaction Gibbs-energy change is zero, but the standard reaction Gibbs-energy change need not be zero.
Statement IV: Adding a catalyst can shift the minimum of the Gibbs-energy curve to a different equilibrium reaction extent without changing the temperature.
Which statements are correct?

20 / 50

20. Ammonia undergoes oxidation to nitrogen gas and water vapour:

The standard formation enthalpies are:


Initially, a reactor contains 0.500 mol of ammonia and 0.300 mol of oxygen. The limiting reactant is completely consumed, and all water remains gaseous.
Assume no competing nitrogen-oxide formation or other reactions occur.
Which pair correctly gives the amount of ammonia remaining and the total reaction enthalpy?

21 / 50

21. A graph records the work done on a fixed amount of ideal gas during reversible isothermal expansion at temperature T.

The horizontal axis is , and the vertical axis is work w in joules, using the chemistry sign convention. The graph is a straight line through the origin with slope . The gas sample contains 2.0 mol, and .

A second experiment uses 1.0 mol of the same gas at twice the temperature determined from the graph. The second sample undergoes reversible isothermal compression from volume to V. What is the work done on the second sample? Take .

22 / 50

22. A reaction compartment is maintained at 300 K and constant pressure while a hypothetical reaction occurs.
The molar thermodynamic changes are


Exactly 0.120 mol of reaction occurs.
All the heat released is transferred to a separate insulated compartment containing 0.500 mol of ice initially at its equilibrium melting temperature of 273 K.
The ice has a molar enthalpy of fusion

Assume that heat transfer is the only interaction between the compartments, the reaction-system temperature remains at 300 K, the supplied reaction entropy change is applicable, and no other thermal effects occur.
Which pair correctly gives the amount of ice remaining and the entropy change of the complete arrangement?

23 / 50

23. An anhydrous ionic solid and its crystalline hydrate dissolve separately in water under the same specified reference conditions. The thermochemical data are:


Assume both dissolution equations use the same consistent aqueous final state for MX and that the water accounting is compatible. Calculate the enthalpy of formation of the crystalline hydrate from the anhydrous solid and liquid water:

24 / 50

24. An insulated calorimeter is tested using an electrical heater that supplies energy at a constant rate. Two heating trials are performed:
Trial I: The empty calorimeter vessel is heated, producing a temperature rise of 4.0 K when 800 J is supplied.
Trial II: The same calorimeter contains a nonreacting liquid sample. The same heater supplies 1800 J, producing a temperature rise of 3.0 K.
Assume constant heat capacities, complete conversion of supplied electrical energy into internal energy of the selected calorimetric assembly, and no heat loss. What is the heat capacity of the liquid sample?

25 / 50

25. Two samples are initially prepared at the same temperature and undergo free expansion into a vacuum inside separate rigid, perfectly insulated containers. Sample P contains a pure ideal gas, while sample Q contains a real gas. Neither sample undergoes a chemical reaction, and no matter crosses either outer boundary. Only pressure-volume work is possible. Which statement must be correct?

26 / 50

26. The following reactions are studied at a common temperature and pressure. Their reaction enthalpies are:

Reaction Equation Enthalpy change
P
Q
R
S

Assuming all thermochemical values refer to the equations exactly as written, which reported reaction enthalpy is inconsistent with Hess's law?

27 / 50

27. Two ionic solids, and , are separately considered for dissolution in water. Assume the conventional qualitative result that smaller ions having the same charge generally experience stronger ion–water electrostatic attraction. The ion is substantially smaller than the ion. Which conclusion is justified without knowing the lattice enthalpies or solubility data of the solids?

28 / 50

28. An ideal gas initially occupies one compartment of a rigid, thermally insulated vessel. The adjoining compartment is evacuated. When the partition is removed, the gas expands freely until it occupies the entire vessel. The gas behaves ideally, and no energy crosses the external boundary.
Consider the following statements.
Statement I: The internal-energy change of the gas is zero.
Statement II: The entropy change of the gas must be zero because the process is adiabatic.
Statement III: The entropy change of the gas can be evaluated using a suitable reversible path connecting the same initial and final equilibrium states.
Statement IV: The process is irreversible even though the initial and final temperatures are equal.
Which statements are correct?

29 / 50

29. The formation of a hypothetical ionic solid from its elements is analysed through the following thermochemical steps:






Let the corresponding enthalpy quantities be , , , , and , respectively, where is the signed enthalpy for electron gain by one mole of gaseous X atoms, and is the positive lattice dissociation enthalpy. Which expression correctly gives the enthalpy of formation of from and ?

30 / 50

30. Three samples of the same pure ideal gas are maintained at a common pressure. Their measured states are given below.

Sample Amount (mol) Temperature (K) Volume (L)
P 1 300 10
Q 2 300 20
R 2 450 30

Let represent mass density and represent molar volume. Which comparison is correct?

31 / 50

31. Use the graph description below.

For a chemical reaction involving ideal gases, the vertical axis represents , measured in kJ per reaction as written. The horizontal axis represents absolute temperature T in kelvin. Over the displayed temperature range, the graph is a straight line passing through the origin and the point , . Assume the reacting species retain their indicated physical states, and use .

Which reaction is consistent with the graph?

32 / 50

32. A sample has a constant heat capacity of over the temperature range considered. It is first cooled from to , then heated from to under the same specified conditions. Which statement correctly describes the total heat transferred to the sample?

33 / 50

33. Two laboratories measure the enthalpy of the reaction

at the same specified temperature and pressure.
Laboratory P reports the enthalpy of formation of gaseous water.
Laboratory Q reports the enthalpy of formation of liquid water.
A third laboratory repeats the gaseous-water reaction with a catalyst, maintaining the same thermochemical endpoints and reaction extent.
Consider the following statements.
Statement I: The reported enthalpies from P and Q need not agree because their product water has different physical states.
Statement II: If the catalyst changes the reaction rate without changing the initial or final states, it does not change the reaction enthalpy.
Statement III: For the liquid-water equation, the difference between constant-pressure and constant-volume reaction heat can be related to its gaseous mole change under an appropriate ideal-gas approximation.
Statement IV: Doubling every coefficient of the gaseous-water formation equation doubles its molar standard enthalpy of formation.
Which statements are correct?

34 / 50

34. A closed thermodynamic system undergoes the cyclic sequence

The measured heat and work transfers for the first two stages are:

Stage Heat transferred to the system Work done on the system
Unknown

Assume the system returns exactly to its initial thermodynamic state and that all relevant energy exchanges are included.
Which pair correctly gives the heat transfer during and the net work done by the system over the complete cycle?

35 / 50

35. A calorimeter contains a metal sample and a quantity of water, initially separated but maintained at the same temperature of 300 K.
The metal sample has heat capacity .
The water has heat capacity .
A chemical reaction occurs only in the water, releasing 6.00 kJ of energy. Subsequently, the metal and water are brought into thermal contact inside the insulated calorimeter.
Assume negligible calorimeter heat capacity, constant heat capacities, no phase changes and complete conversion of the chemical energy into sensible heating.
A student assumes that the heat released by the reaction can be divided by the combined heat capacity immediately, without considering the order of the stages.
Which pair correctly gives the water temperature immediately after reaction but before thermal contact and the final common temperature?

36 / 50

36. A hypothetical gaseous substance A can undergo two competing transformations:


In the first stage of an experiment, 0.200 mol of A reacts completely, forming only B and C. The total heat released at constant pressure is 5.50 kJ.
In a second stage, all the B formed is converted into C at the same reference temperature and pressure. No other chemical changes occur, and only pressure-volume work is possible.
Which pair correctly gives the amount of B formed in Stage I and the heat absorbed during Stage II?

37 / 50

37. A gas is enclosed in a cylinder fitted with a perfectly impermeable, frictionless movable piston. The cylinder and piston are thermally insulated, but external weights can compress the gas. How should the gas be classified?

38 / 50

38. A hypothetical molecular solid X has two experimentally accessible sublimation pathways at the same temperature and pressure.
Pathway I:

Pathway II involves a gaseous intermediate Y:


Assume X and Y have the same elemental composition but are distinct molecular species, and the equations are balanced as written.
Given below are an Assertion (A) and a Reason (R).
Assertion (A): The two pathways are thermochemically consistent, but Pathway II is not itself a direct sublimation of X in its first step.
Reason (R): The overall enthalpy change is the same for both pathways because enthalpy is a state function, while direct sublimation requires the gaseous product to retain the chemical identity of the original solid.
Choose the correct answer.

39 / 50

39. One mole of an ideal gas expands isothermally at 300 K from 5.00 L to 10.00 L.
The actual expansion occurs against a constant external pressure equal to the final equilibrium gas pressure.
The gas remains in thermal contact with a large reservoir at 300 K.
Assume only pressure-volume work occurs.
For an ideal gas,

For reversible isothermal expansion,

Take and .
Which pair correctly gives the entropy generated during the actual expansion and the additional expansion work obtainable in the reversible limit?

40 / 50

40. Exactly 5.00 mol of pure liquid water is initially supercooled to 267 K in an insulated vessel. Crystallisation begins spontaneously, and the final state consists of ice and liquid water in equilibrium at 273 K.
Use the following thermochemical data:


Assume the liquid-water heat capacity remains constant from 267 K to 273 K, no other energetic contributions occur, and the thermochemical pathway used for entropy calculation is valid.
Take

Which pair correctly gives the amount of ice formed and the approximate total entropy change of the insulated contents?

41 / 50

41. Consider the following statements regarding the enthalpies of fusion, vaporisation and sublimation of a pure substance.
Statement I: If the three enthalpies refer to compatible initial and final states at the same temperature and pressure, then .
Statement II: If fusion enthalpy is supplied at the normal melting temperature and vaporisation enthalpy at the normal boiling temperature, their sum must always equal the sublimation enthalpy measured at an arbitrary third temperature.
Statement III: During a pure substance's equilibrium phase transition at fixed pressure, absorbed heat can change the proportion of its phases while its temperature remains constant.
Statement IV: Deposition of a substance from gas to solid has an enthalpy change opposite in sign to sublimation between the same thermodynamic states.
Which statements are correct?

42 / 50

42. A pure substance is heated by a large thermal reservoir maintained at 500 K. Exactly one mole of the substance undergoes the following changes at constant pressure:
Stage I: Solid at 300 K melts completely at 300 K.
Stage II: The resulting liquid warms from 300 K to 350 K.
Stage III: The liquid vaporises completely at 350 K.
Stage IV: The vapour warms from 350 K to 400 K.
The molar enthalpy of fusion is , and the molar enthalpy of vaporisation is .
The liquid and vapour molar heat capacities are respectively and , assumed constant over the specified intervals.
Use

Assume all heat is supplied by the 500 K reservoir and no other energy contributions occur.
What is the approximate entropy change of the universe?

43 / 50

43. Two gaseous structural isomers A and B undergo the reversible reaction

At 300 K, the dimensionless equilibrium constant is

A rigid vessel initially contains 0.400 mol of A and 0.800 mol of B at equilibrium.
An additional 0.600 mol of pure B is injected at constant temperature. The resulting mixture subsequently re-establishes equilibrium.
The forward reaction enthalpy is

Assume ideal-gas behaviour, unchanged vessel volume and no other chemical reactions.
Which pair correctly gives the amount of A at the new equilibrium and the enthalpy change accompanying chemical re-equilibration after the injection?

44 / 50

44. At a specified temperature and pressure, the following thermochemical information is provided for iodine:


Assume all thermochemical values refer to compatible conditions. Which pair correctly gives the enthalpy required to form one mole of gaseous iodine atoms from solid molecular iodine and the enthalpy change for deposition of one mole of gaseous iodine molecules?

45 / 50

45. A calorimeter is calibrated by supplying known amounts of electrical energy under thermally insulated conditions. Its temperature rise is recorded after each energy input.

A graph has temperature rise , in kelvin, on the horizontal axis and supplied electrical energy E, in joules, on the vertical axis. Line P represents the empty calorimeter and passes through and . Line Q represents the same calorimeter after 100 g of a nonreacting liquid has been added. Line Q passes through and . Both lines are straight over the displayed interval. All supplied electrical energy is converted into internal energy of the respective assembly, and heat capacities remain constant.

What is the specific heat capacity of the liquid, and how much energy is required to raise the temperature of a separate 150 g sample of the same liquid by 10 K?

46 / 50

46. A set of experimental measurements is proposed for three thermochemical processes carried out at 300 K and constant pressure. Each process exchanges heat only with a large reservoir at the same temperature.

Process (kJ) () Reported observation
P Spontaneous forward progress
Q Spontaneous forward progress
R Spontaneous forward progress

Assume each listed change corresponds to the experimentally observed extent and there are no other energy or entropy exchanges.
Which conclusion follows?

47 / 50

47. A reaction occurs in a closed vessel maintained at constant external pressure.
The vessel contains a mechanical stirrer driven by an external motor. During the reaction, the motor performs work on the reacting contents.
Given below are an Assertion (A) and a Reason (R).
Assertion (A): Even when only pressure-volume work and stirring work occur, the heat exchanged at constant pressure need not equal the enthalpy change of the reacting contents.
Reason (R): At constant pressure, the enthalpy change includes the effects of heat transfer and non-pressure-volume work, so stirring work can contribute to the energy change independently of heat.
Choose the correct answer.

48 / 50

48. A volatile liquid is initially heated in an open beaker, and some vapour escapes into the atmosphere. The beaker is then covered with a gas-tight, flexible membrane and heating continues. The membrane expands outward as vapour accumulates beneath it. Taking the liquid and its vapour as the system in both arrangements, which statement is correct?

49 / 50

49. Two samples P and Q of the same pure substance are maintained at identical temperature, pressure and physical state. Sample Q contains three times the amount of substance present in P. The heat capacity of P under a specified constant-pressure condition is . Assume the applicable molar heat capacity is constant over the temperature range considered. Which statement is correct?

50 / 50

50. Two enthalpy-of-solution measurements are carried out for the same crystalline solute X at a fixed temperature.
Experiment P dissolves one mole of X(s) in a specified finite amount of water:


Experiment Q represents dissolution into a much larger amount of water, corresponding to a specified highly dilute final state:


The solvent amounts and solution states are defined so that dilution of P into Q can be described by adding the required additional water without any other process.
Exactly 0.100 mol of X is first dissolved into solution P and then diluted to solution Q. The complete insulated apparatus has effective heat capacity , assumed constant, and all enthalpy changes remain applicable over the observed temperature interval.
Which pair correctly gives the molar enthalpy of the dilution step and the net apparatus temperature change for the complete dissolution-and-dilution sequence?

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top