301. Excess zinc is reacted with hydrochloric acid inside a vessel that initially contains \(0.30\,\mathrm{mol}\) of chemically inert nitrogen gas:
\[
\mathrm{Zn(s)+2HCl(aq)\rightarrow ZnCl_2(aq)+H_2(g)}
\]
The reaction proceeds until all supplied HCl has reacted. After the reaction, the dry gas mixture contains only nitrogen and hydrogen, and hydrogen has a mole fraction of \(0.40\). What amount of HCl was initially supplied, and what mass of zinc reacted? (Atomic mass: Zn = 65)
ⓐ. \(0.20\,\mathrm{mol}\) HCl and 6.5 g Zn
ⓑ. \(0.40\,\mathrm{mol}\) HCl and 6.5 g Zn
ⓒ. \(0.60\,\mathrm{mol}\) HCl and 19.5 g Zn
ⓓ. \(0.40\,\mathrm{mol}\) HCl and 13.0 g Zn
Correct Answer: \(0.40\,\mathrm{mol}\) HCl and 13.0 g Zn
Explanation: \(\textbf{Identifying the unchanged gas component:}\)
Nitrogen is explicitly stated to be inert.
Therefore, its amount remains
\[
n_{\mathrm{N_2,final}}=0.30\,\mathrm{mol}
\]
The hydrogen formed by the reaction is the only other dry gas.
\(\textbf{Using the measured final mole fraction:}\)
Let \(x\) be the amount of hydrogen produced.
The total dry gas amount is
\[
n_{\mathrm{gas,total}}=0.30+x
\]
The hydrogen mole fraction is
\[
X_{\mathrm{H_2}}=\frac{x}{0.30+x}
\]
Substituting the measured value,
\[
0.40=\frac{x}{0.30+x}
\]
\[
0.40(0.30+x)=x
\]
\[
0.12+0.40x=x
\]
\[
0.60x=0.12
\]
\[
x=0.20\,\mathrm{mol}
\]
Therefore,
\[
n_{\mathrm{H_2,formed}}=0.20\,\mathrm{mol}
\]
\(\textbf{Reconstructing hydrochloric acid consumption:}\)
The balanced equation consumes two moles of HCl for every mole of hydrogen formed.
\[
n_{\mathrm{HCl,consumed}}=2(0.20)
\]
\[
n_{\mathrm{HCl,consumed}}=0.40\,\mathrm{mol}
\]
All supplied HCl is stated to have reacted.
Thus,
\[
n_{\mathrm{HCl,initial}}=0.40\,\mathrm{mol}
\]
\(\textbf{Determining zinc consumption:}\)
The zinc-to-hydrogen mole ratio is \(1:1\).
\[
n_{\mathrm{Zn,consumed}}=0.20\,\mathrm{mol}
\]
The zinc mass consumed is
\[
m_{\mathrm{Zn,consumed}}=0.20(65)
\]
\[
m_{\mathrm{Zn,consumed}}=13.0\,\text{g}
\]
\(\textbf{Checking the complete dry-gas composition:}\)
The final gas amount is
\[
n_{\mathrm{gas,total}}=0.30+0.20=0.50\,\mathrm{mol}
\]
The hydrogen mole fraction is
\[
X_{\mathrm{H_2}}=\frac{0.20}{0.50}=0.40
\]
This reproduces the observed composition.
The inert nitrogen changes the final gas mole fraction but does not consume HCl or alter the chemical equation.
The reaction's stoichiometry links the inferred hydrogen amount to the acid and zinc consumed.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{HCl,initial}}=0.40\,\mathrm{mol},\quad m_{\mathrm{Zn,consumed}}=13.0\,\text{g}}
\]
302. A mixture contains only sodium carbonate and sodium hydrogen carbonate. The total amount of their formula units is \(0.10\,\mathrm{mol}\). Exactly \(0.16\,\mathrm{mol}\) of HCl is supplied, and both carbonates react completely according to
\[
\mathrm{Na_2CO_3+2HCl\rightarrow2NaCl+CO_2+H_2O}
\]
\[
\mathrm{NaHCO_3+HCl\rightarrow NaCl+CO_2+H_2O}
\]
No HCl remains, and no other reaction occurs. What was the mole fraction of sodium carbonate in the initial solid mixture, and what mass of sodium chloride formed? (Atomic masses: Na = 23, Cl = 35.5)
ⓐ. \(0.40\) and 9.36 g
ⓑ. \(0.60\) and 5.85 g
ⓒ. \(0.60\) and 9.36 g
ⓓ. \(0.40\) and 5.85 g
Correct Answer: \(0.60\) and 9.36 g
Explanation: \(\textbf{Representing the two carbonate amounts:}\)
Let \(x\) moles be sodium carbonate and \(y\) moles be sodium hydrogen carbonate.
Their combined formula-unit amount is
\[
x+y=0.10 \qquad (1)
\]
\(\textbf{Using the different acid requirements:}\)
Each mole of sodium carbonate consumes two moles of HCl.
Each mole of sodium hydrogen carbonate consumes one mole of HCl.
Since both react completely and no HCl remains,
\[
2x+y=0.16 \qquad (2)
\]
\(\textbf{Recovering the original mixture composition:}\)
Subtracting Equation (1) from Equation (2),
\[
x=0.16-0.10
\]
\[
x=0.06\,\mathrm{mol}
\]
Therefore,
\[
y=0.10-0.06
\]
\[
y=0.04\,\mathrm{mol}
\]
\(\textbf{Calculating sodium carbonate mole fraction:}\)
\[
X_{\mathrm{Na_2CO_3}}=\frac{0.06}{0.10}
\]
\[
X_{\mathrm{Na_2CO_3}}=0.60
\]
\(\textbf{Tracking sodium chloride production:}\)
Each mole of sodium carbonate produces two moles of NaCl.
Its contribution is
\[
n_{\mathrm{NaCl,from\ carbonate}}=2(0.06)
\]
\[
n_{\mathrm{NaCl,from\ carbonate}}=0.12\,\mathrm{mol}
\]
Each mole of sodium hydrogen carbonate produces one mole of NaCl.
Its contribution is
\[
n_{\mathrm{NaCl,from\ hydrogen\ carbonate}}=0.04\,\mathrm{mol}
\]
The total is
\[
n_{\mathrm{NaCl,total}}=0.12+0.04
\]
\[
n_{\mathrm{NaCl,total}}=0.16\,\mathrm{mol}
\]
\(\textbf{Converting sodium chloride amount to mass:}\)
\[
M_{\mathrm{NaCl}}=23+35.5
\]
\[
M_{\mathrm{NaCl}}=58.5\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
m_{\mathrm{NaCl}}=0.16(58.5)
\]
\[
m_{\mathrm{NaCl}}=9.36\,\text{g}
\]
\(\textbf{Independent carbon dioxide check:}\)
Both reactions produce one carbon dioxide molecule per reacting carbonate formula unit.
The combined amount of carbon dioxide is therefore
\[
n_{\mathrm{CO_2}}=0.06+0.04=0.10\,\mathrm{mol}
\]
The total HCl consumption is
\[
2(0.06)+0.04=0.16\,\mathrm{mol}
\]
Both specified experimental constraints are satisfied.
The two substances produce the same amount of carbon dioxide per mole of formula units but consume different amounts of acid.
That difference provides the information needed to determine their individual amounts.
\(\textbf{Final answer:}\)
\[
\boxed{X_{\mathrm{Na_2CO_3}}=0.60,\quad m_{\mathrm{NaCl}}=9.36\,\text{g}}
\]
303. Ammonium hydrogen carbonate undergoes complete decomposition according to
\[
\mathrm{NH_4HCO_3(s)\rightarrow NH_3(g)+CO_2(g)+H_2O(g)}
\]
A 7.9 g pure sample is decomposed completely. All water vapour is first condensed and removed. The resulting dry gas mixture is then passed through an absorber that removes ammonia quantitatively without absorbing carbon dioxide. What is the mass of the dry gas mixture before ammonia removal, and what is the volume of the gas leaving the ammonia absorber at STP? Take \(V_m=22.4\,\mathrm{L\,mol^{-1}}\). (Atomic masses: N = 14, H = 1, C = 12, O = 16)
ⓐ. 7.9 g and 2.24 L
ⓑ. 6.1 g and 4.48 L
ⓒ. 6.1 g and 2.24 L
ⓓ. 4.4 g and 2.24 L
Correct Answer: 6.1 g and 2.24 L
Explanation: \(\textbf{Establishing the decomposed formula-unit amount:}\)
The formula \(\mathrm{NH_4HCO_3}\) contains one nitrogen atom, five hydrogen atoms, one carbon atom and three oxygen atoms.
Its molar mass is
\[
M_{\mathrm{NH_4HCO_3}}=14+5(1)+12+3(16)
\]
\[
M_{\mathrm{NH_4HCO_3}}=79\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
n_{\mathrm{NH_4HCO_3}}=\frac{7.9}{79}
\]
\[
n_{\mathrm{NH_4HCO_3}}=0.100\,\mathrm{mol}
\]
\(\textbf{Recovering the three decomposition products:}\)
The balanced equation produces equal mole amounts of ammonia, carbon dioxide and water.
Thus,
\[
n_{\mathrm{NH_3}}=0.100\,\mathrm{mol}
\]
\[
n_{\mathrm{CO_2}}=0.100\,\mathrm{mol}
\]
\[
n_{\mathrm{H_2O}}=0.100\,\mathrm{mol}
\]
\(\textbf{Applying the first separation:}\)
All water vapour is condensed and removed.
Its mass is
\[
m_{\mathrm{H_2O}}=0.100(18)
\]
\[
m_{\mathrm{H_2O}}=1.8\,\text{g}
\]
Therefore, the mass of the dry gas mixture is
\[
m_{\mathrm{dry\ gases}}=7.9-1.8
\]
\[
m_{\mathrm{dry\ gases}}=6.1\,\text{g}
\]
\(\textbf{Independent dry-gas mass calculation:}\)
The ammonia molar mass is
\[
M_{\mathrm{NH_3}}=14+3(1)=17\,\mathrm{g\,mol^{-1}}
\]
The carbon dioxide molar mass is
\[
M_{\mathrm{CO_2}}=44\,\mathrm{g\,mol^{-1}}
\]
Their combined mass is
\[
m_{\mathrm{dry\ gases}}=0.100(17)+0.100(44)
\]
\[
m_{\mathrm{dry\ gases}}=1.7+4.4
\]
\[
m_{\mathrm{dry\ gases}}=6.1\,\text{g}
\]
\(\textbf{Applying the second separation:}\)
The absorber removes all ammonia and none of the carbon dioxide.
Therefore, the gas leaving it contains only
\[
n_{\mathrm{CO_2,outlet}}=0.100\,\mathrm{mol}
\]
\(\textbf{Calculating the final STP volume:}\)
\[
V_{\mathrm{CO_2,outlet}}=nV_m
\]
\[
V_{\mathrm{CO_2,outlet}}=0.100(22.4)
\]
\[
V_{\mathrm{CO_2,outlet}}=2.24\,\text{L}
\]
\(\textbf{Distinguishing the two separations:}\)
Condensation removes water from the original three-component gaseous product mixture.
The ammonia absorber then removes a second component from the already dried gases.
The initial hot gas amount, dry gas amount and final outlet gas amount are therefore different.
The volume of gas leaving the absorber must not include either removed water vapour or absorbed ammonia.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{dry\ gases}}=6.1\,\text{g},\quad V_{\mathrm{CO_2,outlet}}=2.24\,\text{L}}
\]
304. Complete thermal decomposition of pure calcium carbonate follows
\[
\mathrm{CaCO_3(s)\rightarrow CaO(s)+CO_2(g)}
\]
Four laboratory records report initial carbonate mass, final calcium oxide mass and collected carbon dioxide mass.
| Trial | Initial carbonate | CaO obtained | \(\mathrm{CO_2}\) obtained |
| P | 10.0 g | 5.6 g | 4.4 g |
| Q | 20.0 g | 11.2 g | 8.8 g |
| R | 15.0 g | 8.0 g | 7.0 g |
| S | 25.0 g | 14.0 g | 11.0 g |
Assume all recorded masses are exact, products are pure and decomposition is complete. Which conclusion is correct? (Atomic masses: Ca = 40, C = 12, O = 16)
ⓐ. All four trials are consistent because each has equal total reactant and product masses.
ⓑ. Trial R alone is inconsistent, despite satisfying the overall mass balance.
ⓒ. Trials P and R are inconsistent because the product masses are unequal.
ⓓ. Trials Q and S are inconsistent because the amount of oxide differs between trials.
Correct Answer: Trial R alone is inconsistent, despite satisfying the overall mass balance.
Explanation: \(\textbf{Separating the two necessary consistency tests:}\)
A correctly recorded complete decomposition must satisfy overall mass conservation.
It must also satisfy the fixed stoichiometric relationship between the pure carbonate and its two pure products.
Meeting total mass conservation alone is therefore not sufficient.
\(\textbf{Establishing the theoretical product-mass relationship:}\)
The molar masses are
\[
M_{\mathrm{CaCO_3}}=100\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{CaO}}=56\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{CO_2}}=44\,\mathrm{g\,mol^{-1}}
\]
Therefore, every 100 g of completely decomposed pure calcium carbonate produces 56 g CaO and 44 g carbon dioxide.
The required product-mass ratio is
\[
m_{\mathrm{CaO}}:m_{\mathrm{CO_2}}=56:44
\]
\[
m_{\mathrm{CaO}}:m_{\mathrm{CO_2}}=14:11
\]
\(\textbf{Testing Trial P:}\)
For 10.0 g carbonate, the required product masses are
\[
m_{\mathrm{CaO}}=10.0\left(\frac{56}{100}\right)=5.6\,\text{g}
\]
\[
m_{\mathrm{CO_2}}=10.0\left(\frac{44}{100}\right)=4.4\,\text{g}
\]
Both agree with the record.
\(\textbf{Testing Trial Q:}\)
For 20.0 g carbonate,
\[
m_{\mathrm{CaO}}=11.2\,\text{g}
\]
\[
m_{\mathrm{CO_2}}=8.8\,\text{g}
\]
Again, both agree with the record.
\(\textbf{Testing Trial R:}\)
For 15.0 g carbonate, the expected oxide mass is
\[
m_{\mathrm{CaO,expected}}=15.0\left(\frac{56}{100}\right)
\]
\[
m_{\mathrm{CaO,expected}}=8.4\,\text{g}
\]
The expected carbon dioxide mass is
\[
m_{\mathrm{CO_2,expected}}=15.0\left(\frac{44}{100}\right)
\]
\[
m_{\mathrm{CO_2,expected}}=6.6\,\text{g}
\]
The recorded values are 8.0 g and 7.0 g.
Their sum is still 15.0 g, so overall mass conservation appears satisfied.
However, the individual product amounts contradict the required fixed stoichiometric composition.
\(\textbf{Testing Trial S:}\)
For 25.0 g carbonate,
\[
m_{\mathrm{CaO}}=25.0\left(\frac{56}{100}\right)=14.0\,\text{g}
\]
\[
m_{\mathrm{CO_2}}=25.0\left(\frac{44}{100}\right)=11.0\,\text{g}
\]
These match the record.
\(\textbf{Scientific conclusion:}\)
Only Trial R fails the stoichiometric product-distribution test.
A reported experiment can preserve total mass while assigning incorrect masses to individual products.
The law of conservation of mass and the fixed composition implied by a balanced reaction provide complementary checks.
305. Oxygen gas is partially converted into ozone according to
\[
\mathrm{3O_2(g)\rightarrow2O_3(g)}
\]
A mixture initially contains 9.0 L of oxygen and 3.0 L of inert nitrogen. Exactly two-thirds of the initial oxygen molecules are converted into ozone. No other reaction occurs. All gas volumes are compared at the same temperature and pressure. What are the total final gas volume and the mole fraction of ozone in the final mixture?
ⓐ. 10.0 L and \(0.40\)
ⓑ. 9.0 L and \(0.40\)
ⓒ. 10.0 L and \(0.60\)
ⓓ. 8.0 L and \(0.50\)
Correct Answer: 10.0 L and \(0.40\)
Explanation: \(\textbf{Using a common gas-volume basis:}\)
At the same temperature and pressure, gas volumes are proportional to molecular amounts.
Therefore, the stated fractional conversion of oxygen molecules can be applied directly to its initial reference volume.
\(\textbf{Determining oxygen consumed:}\)
The initial oxygen volume is 9.0 L.
Exactly two-thirds is converted.
\[
V_{\mathrm{O_2,consumed}}=9.0\left(\frac23\right)
\]
\[
V_{\mathrm{O_2,consumed}}=6.0\,\text{L}
\]
The unreacted oxygen volume is
\[
V_{\mathrm{O_2,remaining}}=9.0-6.0
\]
\[
V_{\mathrm{O_2,remaining}}=3.0\,\text{L}
\]
\(\textbf{Recovering the ozone volume:}\)
The balanced equation gives
\[
3\mathrm{O_2}\rightarrow2\mathrm{O_3}
\]
Thus, three gaseous molecular quantities of oxygen produce two quantities of ozone.
\[
V_{\mathrm{O_3,formed}}=6.0\left(\frac23\right)
\]
\[
V_{\mathrm{O_3,formed}}=4.0\,\text{L}
\]
\(\textbf{Adding the inert gas contribution:}\)
Nitrogen does not react.
Its amount remains equivalent to a reference volume of 3.0 L.
The final gas mixture therefore contains ozone, unreacted oxygen and nitrogen.
\[
V_{\mathrm{final}}=4.0+3.0+3.0
\]
\[
V_{\mathrm{final}}=10.0\,\text{L}
\]
\(\textbf{Calculating the ozone mole fraction:}\)
At common temperature and pressure, mole fraction equals the corresponding gas-volume fraction.
\[
X_{\mathrm{O_3}}=\frac{V_{\mathrm{O_3}}}{V_{\mathrm{final}}}
\]
\[
X_{\mathrm{O_3}}=\frac{4.0}{10.0}
\]
\[
X_{\mathrm{O_3}}=0.40
\]
\(\textbf{Checking oxygen-atom conservation:}\)
The 6.0 reference-volume units of oxygen consumed represent oxygen molecules containing two atoms each.
They provide twelve corresponding oxygen-atom units.
The 4.0 reference-volume units of ozone contain three oxygen atoms per molecule.
They also represent twelve oxygen-atom units.
Therefore, the oxygen atoms are conserved even though the number of gaseous molecules decreases during ozone formation.
\(\textbf{Final answer:}\)
\[
\boxed{V_{\mathrm{final}}=10.0\,\text{L},\quad X_{\mathrm{O_3}}=0.40}
\]
306. Iron reacts with oxygen to form iron(III) oxide:
\[
\mathrm{4Fe(s)+3O_2(g)\rightarrow2Fe_2O_3(s)}
\]
Exactly \(3.011\times10^{23}\) oxygen molecules react completely with sufficient iron. Take Avogadro's constant as \(6.022\times10^{23}\,\mathrm{mol^{-1}}\). What are the number of iron atoms consumed and the number of iron(III) oxide formula units formed?
ⓐ. \(3.011\times10^{23}\) iron atoms and \(2.007\times10^{23}\) formula units
ⓑ. \(4.015\times10^{23}\) iron atoms and \(4.015\times10^{23}\) formula units
ⓒ. \(6.022\times10^{23}\) iron atoms and \(3.011\times10^{23}\) formula units
ⓓ. \(4.015\times10^{23}\) iron atoms and \(2.007\times10^{23}\) formula units
Correct Answer: \(4.015\times10^{23}\) iron atoms and \(2.007\times10^{23}\) formula units
Explanation: \(\textbf{Converting oxygen molecules into amount:}\)
The supplied oxygen count is
\[
N_{\mathrm{O_2}}=3.011\times10^{23}
\]
The corresponding amount is
\[
n_{\mathrm{O_2}}=\frac{N_{\mathrm{O_2}}}{N_A}
\]
\[
n_{\mathrm{O_2}}=\frac{3.011\times10^{23}}{6.022\times10^{23}}
\]
\[
n_{\mathrm{O_2}}=0.500\,\mathrm{mol}
\]
\(\textbf{Using the iron-to-oxygen coefficient ratio:}\)
The balanced equation consumes four iron atoms for every three oxygen molecules.
Therefore,
\[
n_{\mathrm{Fe,consumed}}=0.500\left(\frac43\right)
\]
\[
n_{\mathrm{Fe,consumed}}=\frac23\,\mathrm{mol}
\]
\(\textbf{Converting the iron amount into atoms:}\)
\[
N_{\mathrm{Fe}}=n_{\mathrm{Fe}}N_A
\]
\[
N_{\mathrm{Fe}}=\frac23(6.022\times10^{23})
\]
\[
N_{\mathrm{Fe}}\approx4.015\times10^{23}\ \text{atoms}
\]
\(\textbf{Recovering the oxide formula-unit amount:}\)
Three moles of oxygen molecules produce two moles of iron(III) oxide formula units.
Therefore,
\[
n_{\mathrm{Fe_2O_3}}=0.500\left(\frac23\right)
\]
\[
n_{\mathrm{Fe_2O_3}}=\frac13\,\mathrm{mol}
\]
\(\textbf{Converting formula-unit amount into count:}\)
\[
N_{\mathrm{Fe_2O_3}}=\frac13(6.022\times10^{23})
\]
\[
N_{\mathrm{Fe_2O_3}}\approx2.007\times10^{23}\ \text{formula units}
\]
\(\textbf{Independent constituent-atom check:}\)
Every iron(III) oxide formula unit contains two iron atoms.
Thus, the number of iron atoms incorporated into the product is
\[
N_{\mathrm{Fe\ in\ oxide}}=2N_{\mathrm{Fe_2O_3}}
\]
\[
N_{\mathrm{Fe\ in\ oxide}}\approx4.015\times10^{23}
\]
This agrees with the iron atoms consumed.
The oxygen molecules initially contain
\[
N_{\mathrm{O\ atoms}}=2(3.011\times10^{23})
\]
\[
N_{\mathrm{O\ atoms}}=6.022\times10^{23}
\]
The oxide formula units contain three oxygen atoms each.
Their combined oxygen-atom count is
\[
3(2.00733\ldots\times10^{23})=6.022\times10^{23}
\]
Both elemental inventories are conserved.
The calculation distinguishes an iron atom, an oxygen molecule and an ionic oxide formula unit as different counted entities.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{Fe}}\approx4.015\times10^{23},\quad N_{\mathrm{Fe_2O_3}}\approx2.007\times10^{23}}
\]
307. A 5.10 g solid mixture contains only elemental magnesium and elemental aluminium. Both metals are reacted completely with excess hydrochloric acid:
\[
\mathrm{Mg+2HCl\rightarrow MgCl_2+H_2}
\]
\[
\mathrm{2Al+6HCl\rightarrow2AlCl_3+3H_2}
\]
The reactions collectively produce \(0.250\,\mathrm{mol}\) of hydrogen gas. What are the original masses of magnesium and aluminium, respectively, and what total amount of HCl was consumed? (Atomic masses: Mg = 24, Al = 27)
ⓐ. 2.4 g Mg, 2.7 g Al and \(0.40\,\mathrm{mol}\) HCl
ⓑ. 2.4 g Mg, 2.7 g Al and \(0.50\,\mathrm{mol}\) HCl
ⓒ. 2.7 g Mg, 2.4 g Al and \(0.50\,\mathrm{mol}\) HCl
ⓓ. 1.2 g Mg, 3.9 g Al and \(0.50\,\mathrm{mol}\) HCl
Correct Answer: 2.4 g Mg, 2.7 g Al and \(0.50\,\mathrm{mol}\) HCl
Explanation: \(\textbf{Separating the contributions of the two metals:}\)
Both metals produce hydrogen on reaction with hydrochloric acid.
However, their metal-to-hydrogen mole ratios differ.
Therefore, the measured total hydrogen amount must be combined with the original mixture mass to recover the two component amounts.
\(\textbf{Representing the unknown metal amounts:}\)
Let
\[
n_{\mathrm{Mg}}=x
\]
\[
n_{\mathrm{Al}}=y
\]
The initial mixture mass is 5.10 g.
Therefore,
\[
24x+27y=5.10 \qquad (1)
\]
\(\textbf{Using hydrogen stoichiometry:}\)
Magnesium produces one mole of hydrogen per mole of metal.
Aluminium produces three moles of hydrogen from two moles of metal.
Thus,
\[
n_{\mathrm{H_2,total}}=x+\frac32y
\]
The measured hydrogen amount gives
\[
x+\frac32y=0.250 \qquad (2)
\]
\(\textbf{Solving the two independent constraints:}\)
From Equation (2),
\[
x=0.250-\frac32y
\]
Substituting into Equation (1),
\[
24\left(0.250-\frac32y\right)+27y=5.10
\]
\[
6.00-36y+27y=5.10
\]
\[
9y=0.90
\]
\[
y=0.100\,\mathrm{mol}
\]
Therefore,
\[
x=0.250-\frac32(0.100)
\]
\[
x=0.100\,\mathrm{mol}
\]
\(\textbf{Recovering the metal masses:}\)
\[
m_{\mathrm{Mg}}=0.100(24)
\]
\[
m_{\mathrm{Mg}}=2.4\,\text{g}
\]
\[
m_{\mathrm{Al}}=0.100(27)
\]
\[
m_{\mathrm{Al}}=2.7\,\text{g}
\]
Their sum is
\[
2.4+2.7=5.1\,\text{g}
\]
\(\textbf{Calculating acid consumption:}\)
The magnesium reaction consumes two moles of HCl per mole of magnesium.
\[
n_{\mathrm{HCl,Mg}}=2(0.100)=0.200\,\mathrm{mol}
\]
The aluminium reaction consumes three moles of HCl per mole of aluminium.
\[
n_{\mathrm{HCl,Al}}=3(0.100)=0.300\,\mathrm{mol}
\]
Hence,
\[
n_{\mathrm{HCl,total}}=0.200+0.300
\]
\[
n_{\mathrm{HCl,total}}=0.500\,\mathrm{mol}
\]
\(\textbf{Independent hydrogen check:}\)
Magnesium produces \(0.100\,\mathrm{mol}\) hydrogen.
Aluminium produces \(0.150\,\mathrm{mol}\) hydrogen.
Their sum is
\[
0.100+0.150=0.250\,\mathrm{mol}
\]
This reproduces the observed gas amount.
The equal mole amounts of the two metals are an inferred result; they must not be assumed from the initial mixture mass.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{Mg}}=2.4\,\text{g},\quad m_{\mathrm{Al}}=2.7\,\text{g},\quad n_{\mathrm{HCl}}=0.50\,\mathrm{mol}}
\]
308. Phosphorus reacts with oxygen to form phosphorus(V) oxide:
\[
\mathrm{P_4+5O_2\rightarrow P_4O_{10}}
\]
A reaction vessel initially contains \(0.20\,\mathrm{mol}\) phosphorus molecules, \(0.50\,\mathrm{mol}\) oxygen molecules and \(0.10\,\mathrm{mol}\) of previously formed phosphorus(V) oxide. The initial oxide does not undergo any other reaction. Assume that all available oxygen is consumed according to the displayed reaction. What are the final total amount of phosphorus(V) oxide and the amount of unreacted phosphorus?
ⓐ. \(0.10\,\mathrm{mol}\) oxide and \(0.10\,\mathrm{mol}\) phosphorus
ⓑ. \(0.20\,\mathrm{mol}\) oxide and \(0\,\mathrm{mol}\) phosphorus
ⓒ. \(0.30\,\mathrm{mol}\) oxide and \(0.10\,\mathrm{mol}\) phosphorus
ⓓ. \(0.20\,\mathrm{mol}\) oxide and \(0.10\,\mathrm{mol}\) phosphorus
Correct Answer: \(0.20\,\mathrm{mol}\) oxide and \(0.10\,\mathrm{mol}\) phosphorus
Explanation: \(\textbf{Distinguishing pre-existing product from newly formed product:}\)
The vessel initially contains some phosphorus(V) oxide.
This product amount must be included in the final inventory, but it does not need to be formed again.
The balanced equation determines only the amount newly produced from phosphorus and oxygen.
\(\textbf{Testing the oxygen requirement:}\)
One mole of \(\mathrm{P_4}\) requires five moles of oxygen.
Complete consumption of the initial phosphorus would require
\[
n_{\mathrm{O_2,required}}=5(0.20)
\]
\[
n_{\mathrm{O_2,required}}=1.00\,\mathrm{mol}
\]
Only \(0.50\,\mathrm{mol}\) oxygen is available.
Therefore, oxygen is limiting under the specified reaction conditions.
\(\textbf{Determining phosphorus consumption:}\)
\[
n_{\mathrm{P_4,consumed}}=\frac{0.50}{5}
\]
\[
n_{\mathrm{P_4,consumed}}=0.10\,\mathrm{mol}
\]
The remaining phosphorus amount is
\[
n_{\mathrm{P_4,remaining}}=0.20-0.10
\]
\[
n_{\mathrm{P_4,remaining}}=0.10\,\mathrm{mol}
\]
\(\textbf{Calculating the newly produced oxide:}\)
The equation forms one mole of phosphorus(V) oxide per mole of phosphorus consumed.
\[
n_{\mathrm{P_4O_{10},new}}=0.10\,\mathrm{mol}
\]
\(\textbf{Combining the final oxide inventory:}\)
Initially, the vessel already contained \(0.10\,\mathrm{mol}\) oxide.
The final amount is
\[
n_{\mathrm{P_4O_{10},final}}=n_{\mathrm{P_4O_{10},initial}}+n_{\mathrm{P_4O_{10},new}}
\]
\[
n_{\mathrm{P_4O_{10},final}}=0.10+0.10
\]
\[
n_{\mathrm{P_4O_{10},final}}=0.20\,\mathrm{mol}
\]
\(\textbf{Independent phosphorus-atom check:}\)
The initial elemental phosphorus contains
\[
n_{P,\mathrm{P_4}}=4(0.20)=0.80\,\mathrm{mol}
\]
The pre-existing oxide contains
\[
n_{P,\mathrm{initial\ oxide}}=4(0.10)=0.40\,\mathrm{mol}
\]
Therefore, the initial total phosphorus-atom amount is
\[
0.80+0.40=1.20\,\mathrm{mol}
\]
Finally, the remaining elemental phosphorus contains \(4(0.10)=0.40\,\mathrm{mol}\) phosphorus atoms.
The final oxide contains \(4(0.20)=0.80\,\mathrm{mol}\) phosphorus atoms.
Their sum is again \(1.20\,\mathrm{mol}\).
The calculation distinguishes reaction extent from the final amount of a species already present before reaction.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{P_4O_{10},final}}=0.20\,\mathrm{mol},\quad n_{\mathrm{P_4,remaining}}=0.10\,\mathrm{mol}}
\]
309. A researcher investigates the reaction
\[
\mathrm{2A+3B\rightarrow4C}
\]
An experiment starts with known amounts of A and B, but it is not established whether the reaction reached completion. A measured amount of C is available. Which additional information is sufficient to distinguish the actual amount of A consumed from its original amount and determine the fraction of initial A that reacted?
ⓐ. Knowing only the molar mass of product C and the reaction stoichiometry
ⓑ. Knowing only the coefficients of the balanced chemical equation
ⓒ. The original amount of A, together with the measured amount of C
ⓓ. Knowing only the identity of the limiting reagent in the reaction
Correct Answer: The original amount of A, together with the measured amount of C
Explanation: The balanced equation relates two moles of A consumed to four moles of C formed.
Therefore, the measured amount of C can be used to calculate the amount of A actually consumed.
The relationship is
\[
n_{\mathrm{A,consumed}}=\frac24n_{\mathrm{C,formed}}
\]
However, calculating the fraction of initial A that reacted requires both the consumed amount and the initial amount.
The required fraction is
\[
f_{\mathrm{A,reacted}}=\frac{n_{\mathrm{A,consumed}}}{n_{\mathrm{A,initial}}}
\]
The molar mass of C alone does not provide the missing initial amount of A.
A balanced chemical equation supplies proportional relationships but does not independently specify how much of each reactant was initially present.
The identity of the limiting reagent is also insufficient because the reaction may have stopped before that reagent was exhausted.
Knowing which reactant would limit the maximum product amount does not establish the experimentally achieved conversion.
By contrast, knowing the original amount of A and measuring the product amount determines both quantities required in the fraction.
The measured C amount gives A consumption through the balanced equation.
The original A amount provides the denominator.
This distinction prevents an observed amount of product from being mistaken automatically for the theoretical maximum.
Therefore, Option C provides sufficient information.
310. Magnesium and aluminium are heated together in a closed vessel containing a limited amount of oxygen. The possible reactions are
\[
\mathrm{2Mg+O_2\rightarrow2MgO}
\]
\[
\mathrm{4Al+3O_2\rightarrow2Al_2O_3}
\]
Initially, \(0.20\,\mathrm{mol}\) magnesium, \(0.10\,\mathrm{mol}\) aluminium and \(0.12\,\mathrm{mol}\) oxygen gas are present. Assume that all oxygen is consumed, that only MgO and \(\mathrm{Al_2O_3}\) form, and that no material leaves the vessel. The individual amounts of magnesium and aluminium that react are not measured. Which conclusion is justified? (Atomic masses: Mg = 24, Al = 27, O = 16)
ⓐ. Exactly 8.0 g of MgO and 5.1 g of \(\mathrm{Al_2O_3}\) form.
ⓑ. The final solid mass is 11.34 g, but the separate oxide masses cannot be uniquely determined.
ⓒ. Exactly 4.8 g of magnesium oxide forms because magnesium reacts preferentially.
ⓓ. The total solid mass cannot be determined without knowing which metal reacts first.
Correct Answer: The final solid mass is 11.34 g, but the separate oxide masses cannot be uniquely determined.
Explanation: \(\textbf{Establishing the total initial metal mass:}\)
The initial magnesium mass is
\[
m_{\mathrm{Mg}}=0.20(24)
\]
\[
m_{\mathrm{Mg}}=4.8\,\text{g}
\]
The initial aluminium mass is
\[
m_{\mathrm{Al}}=0.10(27)
\]
\[
m_{\mathrm{Al}}=2.7\,\text{g}
\]
Therefore,
\[
m_{\mathrm{metals,total}}=4.8+2.7
\]
\[
m_{\mathrm{metals,total}}=7.5\,\text{g}
\]
\(\textbf{Determining oxygen incorporated into solids:}\)
All \(0.12\,\mathrm{mol}\) oxygen gas is consumed.
Since both stated products are solids and no other products form, every consumed oxygen atom becomes part of an oxide.
The consumed oxygen mass is
\[
m_{\mathrm{O_2,consumed}}=0.12(32)
\]
\[
m_{\mathrm{O_2,consumed}}=3.84\,\text{g}
\]
\(\textbf{Calculating the final solid inventory:}\)
Initially, all metal is present as solid.
The reaction transfers oxygen from the gas phase into solid oxides.
No solid material is lost.
Therefore,
\[
m_{\mathrm{solids,final}}=m_{\mathrm{metals,initial}}+m_{\mathrm{oxygen\ incorporated}}
\]
\[
m_{\mathrm{solids,final}}=7.5+3.84
\]
\[
m_{\mathrm{solids,final}}=11.34\,\text{g}
\]
\(\textbf{Testing whether complete oxidation of both metals is possible:}\)
Complete oxidation of magnesium requires
\[
n_{\mathrm{O_2,Mg}}=0.20\left(\frac12\right)
\]
\[
n_{\mathrm{O_2,Mg}}=0.100\,\mathrm{mol}
\]
Complete oxidation of aluminium requires
\[
n_{\mathrm{O_2,Al}}=0.10\left(\frac34\right)
\]
\[
n_{\mathrm{O_2,Al}}=0.075\,\mathrm{mol}
\]
The combined oxygen requirement is
\[
0.100+0.075=0.175\,\mathrm{mol}
\]
The available \(0.12\,\mathrm{mol}\) is insufficient to oxidise both metals completely.
\(\textbf{Assessing product-distribution uniqueness:}\)
The problem does not specify how the limited oxygen is distributed between the two metals.
The amount of MgO depends on how much magnesium reacts.
The amount of \(\mathrm{Al_2O_3}\) depends on how much aluminium reacts.
Different distributions can satisfy the same total oxygen consumption while producing different individual oxide masses.
\(\textbf{Checking the invariant:}\)
Every permitted distribution must incorporate exactly 3.84 g oxygen into the retained solids.
The initial 7.5 g of metal atoms also remains in the solids, whether combined or unreacted.
Hence, the total final solid mass is fixed even though the separate amounts of the two oxides are not.
Assuming preferential reaction of one metal would introduce information not supplied in the question.
The justified result is a determined total solid mass with an undetermined individual oxide composition.
\(\textbf{Final conclusion:}\)
The final solids weigh 11.34 g. Their individual magnesium oxide and aluminium oxide masses cannot be uniquely calculated from the stated information.
311. A solid mixture contains only anhydrous sodium sulphate, \(\mathrm{Na_2SO_4}\), and aluminium sulphate, \(\mathrm{Al_2(SO_4)_3}\). The total amount of salt formula units is \(0.30\,\mathrm{mol}\). After complete dissolution, the solution contains \(0.50\,\mathrm{mol}\) of sulphate ions. Assume complete dissociation of both salts and no other dissolved solute species. What are the original mixture mass and the total amount of independently dispersed ions in the resulting solution? (Atomic masses: Na = 23, Al = 27, S = 32, O = 16)
ⓐ. 62.6 g and \(1.10\,\mathrm{mol}\)
ⓑ. 69.0 g and \(0.80\,\mathrm{mol}\)
ⓒ. 69.0 g and \(1.10\,\mathrm{mol}\)
ⓓ. 62.6 g and \(0.80\,\mathrm{mol}\)
Correct Answer: 62.6 g and \(1.10\,\mathrm{mol}\)
Explanation: \(\textbf{Interpreting the formula-unit inventory:}\)
The initial solid mixture contains two different ionic compounds.
The amount of formula units is the sum of their individual amounts.
It does not equal the total amount of ions obtained after dissolution.
Let \(x\) be the amount of sodium sulphate and \(y\) the amount of aluminium sulphate.
\[
x+y=0.30 \qquad (1)
\]
\(\textbf{Using sulphate-ion counting:}\)
Complete dissociation follows the constituent-ion relationships
\[
\mathrm{Na_2SO_4\rightarrow2Na^++SO_4^{2-}}
\]
\[
\mathrm{Al_2(SO_4)_3\rightarrow2Al^{3+}+3SO_4^{2-}}
\]
One sodium sulphate formula unit supplies one sulphate ion.
One aluminium sulphate formula unit supplies three sulphate ions.
Therefore,
\[
x+3y=0.50 \qquad (2)
\]
\(\textbf{Recovering the two salt amounts:}\)
Subtracting Equation (1) from Equation (2),
\[
2y=0.50-0.30
\]
\[
2y=0.20
\]
\[
y=0.10\,\mathrm{mol}
\]
Consequently,
\[
x=0.30-0.10
\]
\[
x=0.20\,\mathrm{mol}
\]
\(\textbf{Calculating the initial mixture mass:}\)
The sodium sulphate molar mass is
\[
M_{\mathrm{Na_2SO_4}}=2(23)+32+4(16)
\]
\[
M_{\mathrm{Na_2SO_4}}=142\,\mathrm{g\,mol^{-1}}
\]
Its contribution is
\[
m_{\mathrm{Na_2SO_4}}=0.20(142)
\]
\[
m_{\mathrm{Na_2SO_4}}=28.4\,\text{g}
\]
The aluminium sulphate molar mass is
\[
M_{\mathrm{Al_2(SO_4)_3}}=2(27)+3[32+4(16)]
\]
\[
M_{\mathrm{Al_2(SO_4)_3}}=342\,\mathrm{g\,mol^{-1}}
\]
Its mass is
\[
m_{\mathrm{Al_2(SO_4)_3}}=0.10(342)
\]
\[
m_{\mathrm{Al_2(SO_4)_3}}=34.2\,\text{g}
\]
Therefore,
\[
m_{\mathrm{mixture}}=28.4+34.2
\]
\[
m_{\mathrm{mixture}}=62.6\,\text{g}
\]
\(\textbf{Counting all independently dispersed ions:}\)
Sodium sulphate produces three ions per formula unit.
Aluminium sulphate produces five ions per formula unit.
\[
n_{\mathrm{ions,total}}=3(0.20)+5(0.10)
\]
\[
n_{\mathrm{ions,total}}=0.60+0.50
\]
\[
n_{\mathrm{ions,total}}=1.10\,\mathrm{mol}
\]
\(\textbf{Independent elemental-ion check:}\)
The individual ion amounts are
\[
n_{\mathrm{Na^+}}=2(0.20)=0.40\,\mathrm{mol}
\]
\[
n_{\mathrm{Al^{3+}}}=2(0.10)=0.20\,\mathrm{mol}
\]
\[
n_{\mathrm{SO_4^{2-}}}=0.50\,\mathrm{mol}
\]
Their sum is \(1.10\,\mathrm{mol}\).
The positive charge amount is \(0.40+3(0.20)=1.00\,\mathrm{mol}\) of elementary charges.
The negative charge amount is \(2(0.50)=1.00\,\mathrm{mol}\) of elementary charges.
The solution is electrically neutral.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{mixture}}=62.6\,\text{g},\quad n_{\mathrm{ions,total}}=1.10\,\mathrm{mol}}
\]
312. Three separate pure samples contain ammonia, \(\mathrm{NH_3}\), methane, \(\mathrm{CH_4}\), and water, \(\mathrm{H_2O}\), respectively. Their sample sizes are selected so that each contains exactly the same total number of constituent atoms. What is the ratio of their sample masses, ammonia:methane:water? (Atomic masses: N = 14, C = 12, H = 1, O = 16)
ⓐ. \(17:16:18\)
ⓑ. \(85:64:120\)
ⓒ. \(68:80:54\)
ⓓ. \(85:80:90\)
Correct Answer: \(85:64:120\)
Explanation: \(\textbf{Distinguishing molecules from constituent atoms:}\)
The condition specifies equal total numbers of atoms, not equal numbers of molecules.
The three substances have different molecular atomicities.
Therefore, the molecular amounts required to satisfy the condition are different.
\(\textbf{Determining the atoms per molecule:}\)
One ammonia molecule contains one nitrogen atom and three hydrogen atoms.
Its atomicity is
\[
a_{\mathrm{NH_3}}=1+3=4
\]
One methane molecule contains one carbon atom and four hydrogen atoms.
\[
a_{\mathrm{CH_4}}=1+4=5
\]
One water molecule contains two hydrogen atoms and one oxygen atom.
\[
a_{\mathrm{H_2O}}=2+1=3
\]
\(\textbf{Connecting molecular amounts with equal atom counts:}\)
Let each sample contain \(k\,\mathrm{mol}\) of constituent atoms.
For any pure molecular substance,
\[
n_{\mathrm{atoms}}=a\,n_{\mathrm{molecules}}
\]
Therefore,
\[
n_{\mathrm{NH_3}}=\frac{k}{4}
\]
\[
n_{\mathrm{CH_4}}=\frac{k}{5}
\]
\[
n_{\mathrm{H_2O}}=\frac{k}{3}
\]
\(\textbf{Converting the molecular amounts into sample masses:}\)
The molar masses are
\[
M_{\mathrm{NH_3}}=14+3=17\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{CH_4}}=12+4=16\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{H_2O}}=2+16=18\,\mathrm{g\,mol^{-1}}
\]
The required sample masses are
\[
m_{\mathrm{NH_3}}=\frac{17k}{4}
\]
\[
m_{\mathrm{CH_4}}=\frac{16k}{5}
\]
\[
m_{\mathrm{H_2O}}=\frac{18k}{3}
\]
\(\textbf{Constructing the mass ratio:}\)
\[
m_{\mathrm{NH_3}}:m_{\mathrm{CH_4}}:m_{\mathrm{H_2O}}
=\frac{17}{4}:\frac{16}{5}:6
\]
Multiplying every ratio term by 20,
\[
m_{\mathrm{NH_3}}:m_{\mathrm{CH_4}}:m_{\mathrm{H_2O}}
=85:64:120
\]
\(\textbf{Checking the atomic inventory:}\)
Choose samples containing four moles of atoms each.
The required molecular amounts are \(1\,\mathrm{mol}\) ammonia, \(0.8\,\mathrm{mol}\) methane and \(\frac43\,\mathrm{mol}\) water.
Their masses are 17 g, 12.8 g and 24 g, respectively.
Multiplication of this mass ratio by five again gives \(85:64:120\).
Equal constituent-atom counts do not imply equal molecular counts or equal sample masses.
Both atomicity and molar mass must be considered.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{NH_3}}:m_{\mathrm{CH_4}}:m_{\mathrm{H_2O}}=85:64:120}
\]
313. A non-reacting mixture contains methane and water vapour in the molecular-number ratio \(2:1\), respectively. What are the mass percentage of water vapour in the mixture and the fraction of all constituent atoms that are oxygen atoms? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. \(36\%\) and \(\dfrac13\)
ⓑ. \(64\%\) and \(\dfrac1{13}\)
ⓒ. \(36\%\) and \(\dfrac1{11}\)
ⓓ. \(36\%\) and \(\dfrac1{13}\)
Correct Answer: \(36\%\) and \(\dfrac1{13}\)
Explanation: \(\textbf{Interpreting the molecular-number ratio:}\)
The ratio \(2:1\) means that two methane molecules are present for every one water molecule.
The corresponding mole ratio is also \(2:1\).
A convenient basis is two moles of methane molecules and one mole of water molecules.
\(\textbf{Calculating the component masses:}\)
Methane has molar mass
\[
M_{\mathrm{CH_4}}=12+4(1)=16\,\mathrm{g\,mol^{-1}}
\]
The methane mass on the selected basis is
\[
m_{\mathrm{CH_4}}=2(16)=32\,\text{g}
\]
Water has molar mass
\[
M_{\mathrm{H_2O}}=2(1)+16=18\,\mathrm{g\,mol^{-1}}
\]
Its mass is
\[
m_{\mathrm{H_2O}}=1(18)=18\,\text{g}
\]
Therefore,
\[
m_{\mathrm{total}}=32+18=50\,\text{g}
\]
\(\textbf{Determining the water mass percentage:}\)
\[
\%\mathrm{H_2O}=\frac{18}{50}\times100
\]
\[
\%\mathrm{H_2O}=36\%
\]
\(\textbf{Counting atoms contributed by methane:}\)
One methane molecule contains five atoms.
Two moles of methane molecules contain
\[
n_{\mathrm{atoms,CH_4}}=2(5)
\]
\[
n_{\mathrm{atoms,CH_4}}=10\,\mathrm{mol}
\]
of constituent atoms.
\(\textbf{Counting atoms contributed by water:}\)
One water molecule contains three atoms.
One mole of water molecules therefore contributes
\[
n_{\mathrm{atoms,H_2O}}=3\,\mathrm{mol}
\]
of atoms.
The mixture contains
\[
n_{\mathrm{atoms,total}}=10+3
\]
\[
n_{\mathrm{atoms,total}}=13\,\mathrm{mol}
\]
of constituent atoms.
\(\textbf{Finding the oxygen-atom fraction:}\)
Only water contributes oxygen atoms.
Every water molecule contains one oxygen atom.
Thus,
\[
n_{\mathrm{O\ atoms}}=1\,\mathrm{mol}
\]
Therefore,
\[
f_{\mathrm{O,atoms}}=\frac{1}{13}
\]
\(\textbf{Comparing three different compositions:}\)
Water contributes one-third of the mixture's molecules.
It contributes 36% of the mixture's mass.
Oxygen atoms contribute only one-thirteenth of all constituent atoms.
These quantities have different denominators and must not be interchanged.
The molecular ratio gives a starting basis, while molar masses and molecular atomicities determine the two requested measures.
\(\textbf{Final answer:}\)
\[
\boxed{\%\mathrm{H_2O}=36\%,\quad f_{\mathrm{O,atoms}}=\frac1{13}}
\]
314. A non-reacting liquid mixture contains only methanol, \(\mathrm{CH_3OH}\), and water. The combined amount of methanol and water molecules is \(0.30\,\mathrm{mol}\). The mixture contains exactly \(1.00\,\mathrm{mol}\) of hydrogen atoms. What are the mass of methanol present and the ratio of the amounts of oxygen atoms to carbon atoms in the mixture? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. 3.2 g and \(3:1\)
ⓑ. 6.4 g and \(2:3\)
ⓒ. 6.4 g and \(3:2\)
ⓓ. 9.6 g and \(1:1\)
Correct Answer: 6.4 g and \(3:2\)
Explanation: \(\textbf{Translating the molecular inventory:}\)
Let \(x\) be the amount of methanol molecules and \(y\) the amount of water molecules.
The total molecular amount gives
\[
x+y=0.30 \qquad (1)
\]
\(\textbf{Counting hydrogen atoms in both components:}\)
One methanol molecule, \(\mathrm{CH_3OH}\), contains four hydrogen atoms.
One water molecule contains two hydrogen atoms.
Therefore, the total hydrogen-atom amount satisfies
\[
4x+2y=1.00 \qquad (2)
\]
\(\textbf{Recovering the component amounts:}\)
Multiplying Equation (1) by two,
\[
2x+2y=0.60
\]
Subtracting this relation from Equation (2),
\[
2x=0.40
\]
\[
x=0.20\,\mathrm{mol}
\]
Therefore,
\[
y=0.30-0.20
\]
\[
y=0.10\,\mathrm{mol}
\]
\(\textbf{Determining methanol mass:}\)
The molar mass of methanol is
\[
M_{\mathrm{CH_3OH}}=12+4(1)+16
\]
\[
M_{\mathrm{CH_3OH}}=32\,\mathrm{g\,mol^{-1}}
\]
The methanol mass is
\[
m_{\mathrm{CH_3OH}}=0.20(32)
\]
\[
m_{\mathrm{CH_3OH}}=6.4\,\text{g}
\]
\(\textbf{Recovering the oxygen and carbon inventories:}\)
Every methanol molecule contains one oxygen atom and one carbon atom.
Every water molecule contains one oxygen atom and no carbon atom.
Thus,
\[
n_O=x+y
\]
\[
n_O=0.30\,\mathrm{mol}
\]
The carbon amount comes entirely from methanol.
\[
n_C=x
\]
\[
n_C=0.20\,\mathrm{mol}
\]
Therefore,
\[
n_O:n_C=0.30:0.20
\]
\[
n_O:n_C=3:2
\]
\(\textbf{Independent hydrogen check:}\)
Methanol contributes
\[
n_{H,\mathrm{methanol}}=4(0.20)=0.80\,\mathrm{mol}
\]
Water contributes
\[
n_{H,\mathrm{water}}=2(0.10)=0.20\,\mathrm{mol}
\]
The combined hydrogen amount is \(1.00\,\mathrm{mol}\), as measured.
The calculation requires distinguishing molecules from their constituent atoms and recognising that only one component contributes carbon.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{CH_3OH}}=6.4\,\text{g},\quad n_O:n_C=3:2}
\]
315. A closed container holds a non-reacting mixture containing only \(\mathrm{H_2}\) and \(\mathrm{O_2}\). The combined amount of gas molecules is exactly \(0.40\,\mathrm{mol}\). The total amount of constituent atoms is independently measured as \(0.80\,\mathrm{mol}\). Both gases are known to be present in nonzero amounts. Which conclusion is justified? (Atomic masses: H = 1, O = 16)
ⓐ. The two gases must have equal mole fractions.
ⓑ. The molecular composition remains undetermined, and the total mass must lie strictly between 0.8 g and 12.8 g.
ⓒ. The molecular composition is uniquely determined because two independent particle measurements are available.
ⓓ. The oxygen mole fraction must be \(0.25\), and the total mass must be 4.0 g.
Correct Answer: The molecular composition remains undetermined, and the total mass must lie strictly between 0.8 g and 12.8 g.
Explanation: The sample contains two different diatomic molecular species.
Each hydrogen molecule contains two hydrogen atoms.
Each oxygen molecule also contains two oxygen atoms.
Consequently, every molecule in the mixture contributes exactly two constituent atoms, irrespective of its chemical identity.
The measured molecular amount is \(0.40\,\mathrm{mol}\).
It therefore necessarily corresponds to \(2(0.40)=0.80\,\mathrm{mol}\) of constituent atoms.
The second measurement is consistent with the first, but it provides no new information about the relative amounts of hydrogen and oxygen molecules.
Let \(x\) be the amount of oxygen molecules.
Then the hydrogen amount is \(0.40-x\).
Because both gases are present, \(x\) must be greater than zero and less than \(0.40\,\mathrm{mol}\).
The total mass is
\[
m=32x+2(0.40-x)
\]
\[
m=0.80+30x
\]
The minimum limiting mass of 0.8 g would correspond to pure hydrogen.
The maximum limiting mass of 12.8 g would correspond to pure oxygen.
Neither limiting composition is allowed because both gases are known to be present.
Thus, the total mixture mass lies strictly between these limits, but no unique value can be selected.
A measurement of mass, oxygen-atom amount or another composition-sensitive quantity would provide an additional independent constraint.
Simply measuring the total number of constituent atoms does not distinguish molecular species having the same atomicity.
The correct conclusion is therefore that the composition is underdetermined despite the two mutually consistent particle measurements.
316. An aqueous solution is prepared by dissolving \(0.10\,\mathrm{mol}\) of calcium chloride and \(0.15\,\mathrm{mol}\) of aluminium chloride. Assume complete dissociation of both salts into their constituent ions, with no hydrolysis or other reactions. What are the total amount of chloride ions and the total amount of independently dispersed solute ions?
ⓐ. \(0.65\,\mathrm{mol}\) chloride ions and \(0.90\,\mathrm{mol}\) total ions
ⓑ. \(0.65\,\mathrm{mol}\) chloride ions and \(0.65\,\mathrm{mol}\) total ions
ⓒ. \(0.45\,\mathrm{mol}\) chloride ions and \(0.90\,\mathrm{mol}\) total ions
ⓓ. \(0.65\,\mathrm{mol}\) chloride ions and \(1.15\,\mathrm{mol}\) total ions
Correct Answer: \(0.65\,\mathrm{mol}\) chloride ions and \(0.90\,\mathrm{mol}\) total ions
Explanation: \(\textbf{Interpreting complete dissociation:}\)
Calcium chloride and aluminium chloride are represented by ionic formula units.
Under the stated complete-dissociation assumption, their constituent ions are counted separately in solution.
\(\textbf{Calcium chloride contribution:}\)
\[
\mathrm{CaCl_2\rightarrow Ca^{2+}+2Cl^-}
\]
One mole of calcium chloride formula units contributes one mole of calcium ions and two moles of chloride ions.
For \(0.10\,\mathrm{mol}\) calcium chloride,
\[
n_{\mathrm{Ca^{2+}}}=0.10\,\mathrm{mol}
\]
\[
n_{\mathrm{Cl^-,from\ CaCl_2}}=2(0.10)
\]
\[
n_{\mathrm{Cl^-,from\ CaCl_2}}=0.20\,\mathrm{mol}
\]
\(\textbf{Aluminium chloride contribution:}\)
\[
\mathrm{AlCl_3\rightarrow Al^{3+}+3Cl^-}
\]
For \(0.15\,\mathrm{mol}\) aluminium chloride,
\[
n_{\mathrm{Al^{3+}}}=0.15\,\mathrm{mol}
\]
\[
n_{\mathrm{Cl^-,from\ AlCl_3}}=3(0.15)
\]
\[
n_{\mathrm{Cl^-,from\ AlCl_3}}=0.45\,\mathrm{mol}
\]
\(\textbf{Combining chloride ions from both salts:}\)
\[
n_{\mathrm{Cl^-,total}}=0.20+0.45
\]
\[
n_{\mathrm{Cl^-,total}}=0.65\,\mathrm{mol}
\]
\(\textbf{Counting all dissolved ions:}\)
The solution contains calcium ions, aluminium ions and chloride ions.
Therefore,
\[
n_{\mathrm{ions,total}}=0.10+0.15+0.65
\]
\[
n_{\mathrm{ions,total}}=0.90\,\mathrm{mol}
\]
\(\textbf{Checking electrical neutrality:}\)
The calcium ions contribute positive charge amounting to
\[
2(0.10)=0.20\,\mathrm{mol}
\]
of elementary charges.
The aluminium ions contribute
\[
3(0.15)=0.45\,\mathrm{mol}
\]
of elementary charges.
The combined positive charge amount is \(0.65\,\mathrm{mol}\) of elementary charges.
The chloride ions contribute an equal amount of negative charge.
The ionic composition is therefore electrically neutral.
The amount of formula units originally dissolved is only \(0.25\,\mathrm{mol}\), which must not be confused with the \(0.90\,\mathrm{mol}\) of independently dispersed ions.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{Cl^-}}=0.65\,\mathrm{mol},\quad n_{\mathrm{ions,total}}=0.90\,\mathrm{mol}}
\]
317. A non-reacting gaseous mixture contains only water vapour and methane. Exactly \(1.00\,\mathrm{mol}\) of gas molecules is present. The total amount of constituent atoms is measured as \(3.60\,\mathrm{mol}\). What are the mole fraction of methane and the average molar mass of the gas mixture? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. \(0.60\) and \(17.4\,\mathrm{g\,mol^{-1}}\)
ⓑ. \(0.60\) and \(16.8\,\mathrm{g\,mol^{-1}}\)
ⓒ. \(0.30\) and \(16.8\,\mathrm{g\,mol^{-1}}\)
ⓓ. \(0.30\) and \(17.4\,\mathrm{g\,mol^{-1}}\)
Correct Answer: \(0.30\) and \(17.4\,\mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Comparing molecular atomicities:}\)
A water molecule contains three constituent atoms.
A methane molecule contains five constituent atoms.
Changing the mixture's molecular composition therefore changes the total number of constituent atoms per mole of gas molecules.
\(\textbf{Representing the molecular composition:}\)
Let \(x\) be the mole fraction of methane.
For the chosen one-mole mixture basis,
\[
n_{\mathrm{CH_4}}=x
\]
\[
n_{\mathrm{H_2O}}=1-x
\]
\(\textbf{Using the measured total atomic amount:}\)
Water contributes three moles of atoms per mole of molecules.
Methane contributes five.
Therefore,
\[
n_{\mathrm{atoms,total}}=3(1-x)+5x
\]
The measured atomic amount is \(3.60\,\mathrm{mol}\).
\[
3.60=3(1-x)+5x
\]
\[
3.60=3-3x+5x
\]
\[
3.60=3+2x
\]
\[
2x=0.60
\]
\[
x=0.30
\]
Thus,
\[
X_{\mathrm{CH_4}}=0.30
\]
and
\[
X_{\mathrm{H_2O}}=0.70
\]
\(\textbf{Determining the mixture's average molar mass:}\)
The molar masses are
\[
M_{\mathrm{CH_4}}=16\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{H_2O}}=18\,\mathrm{g\,mol^{-1}}
\]
For a non-reacting molecular mixture,
\[
\overline{M}=X_{\mathrm{CH_4}}M_{\mathrm{CH_4}}+X_{\mathrm{H_2O}}M_{\mathrm{H_2O}}
\]
Substituting,
\[
\overline{M}=0.30(16)+0.70(18)
\]
\[
\overline{M}=4.8+12.6
\]
\[
\overline{M}=17.4\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Independent atom-count verification:}\)
Methane contributes
\[
n_{\mathrm{atoms,CH_4}}=5(0.30)=1.50\,\mathrm{mol}
\]
Water contributes
\[
n_{\mathrm{atoms,H_2O}}=3(0.70)=2.10\,\mathrm{mol}
\]
Their sum is \(3.60\,\mathrm{mol}\).
The total atomic amount identifies the molecular composition because the two molecular species have different atomicities.
Once that composition is known, the average molar mass can be calculated from the component molar masses.
\(\textbf{Final answer:}\)
\[
\boxed{X_{\mathrm{CH_4}}=0.30,\quad\overline{M}=17.4\,\mathrm{g\,mol^{-1}}}
\]
318. Four pure molecular substances are considered: ammonia, \(\mathrm{NH_3}\); hydrazine, \(\mathrm{N_2H_4}\); nitrogen dioxide, \(\mathrm{NO_2}\); and dinitrogen monoxide, \(\mathrm{N_2O}\). Equal masses are taken from each substance. Which order correctly ranks the samples by decreasing number of nitrogen atoms? (Atomic masses: N = 14, H = 1, O = 16)
ⓐ. \(\mathrm{NH_3}\gt\mathrm{N_2H_4}\gt\mathrm{N_2O}\gt\mathrm{NO_2}\)
ⓑ. \(\mathrm{N_2H_4}\gt\mathrm{NH_3}\gt\mathrm{N_2O}\gt\mathrm{NO_2}\)
ⓒ. \(\mathrm{N_2H_4}\gt\mathrm{N_2O}\gt\mathrm{NH_3}\gt\mathrm{NO_2}\)
ⓓ. \(\mathrm{N_2O}\gt\mathrm{N_2H_4}\gt\mathrm{NH_3}\gt\mathrm{NO_2}\)
Correct Answer: \(\mathrm{N_2H_4}\gt\mathrm{NH_3}\gt\mathrm{N_2O}\gt\mathrm{NO_2}\)
Explanation: The comparison concerns the number of nitrogen atoms in equal-mass samples.
It does not concern the number of molecules alone.
For a substance containing \(a\) nitrogen atoms per molecule, the amount of nitrogen atoms in a sample of mass \(m\) is
\[
n_N=\frac{am}{M}
\]
Since the sample mass is the same for all four substances, nitrogen-atom count is proportional to the quantity \(a/M\).
For ammonia, the molar mass is \(14+3=17\,\mathrm{g\,mol^{-1}}\), and there is one nitrogen atom per molecule.
Its comparison factor is
\[
\frac{a}{M}=\frac1{17}
\]
For hydrazine, the molar mass is \(2(14)+4=32\,\mathrm{g\,mol^{-1}}\), and there are two nitrogen atoms per molecule.
Its comparison factor is
\[
\frac{a}{M}=\frac2{32}=\frac1{16}
\]
For nitrogen dioxide, the molar mass is \(14+2(16)=46\,\mathrm{g\,mol^{-1}}\), and there is one nitrogen atom per molecule.
Its factor is
\[
\frac1{46}
\]
For dinitrogen monoxide, the molar mass is \(2(14)+16=44\,\mathrm{g\,mol^{-1}}\), and there are two nitrogen atoms per molecule.
Its factor is
\[
\frac2{44}=\frac1{22}
\]
Comparing these positive fractions,
\[
\frac1{16}\gt\frac1{17}\gt\frac1{22}\gt\frac1{46}
\]
Thus, hydrazine supplies the greatest number of nitrogen atoms per gram, followed by ammonia, dinitrogen monoxide and nitrogen dioxide.
The molecule containing more nitrogen atoms does not automatically provide more nitrogen atoms per unit mass.
Its greater molecular mass must also be considered.
The required decreasing order is \(\mathrm{N_2H_4}\gt\mathrm{NH_3}\gt\mathrm{N_2O}\gt\mathrm{NO_2}\).
319. A closed container initially contains \(0.30\,\mathrm{mol}\) of pure water vapour. The container is cooled until exactly two-thirds of the water molecules become liquid, while the remaining one-third stay in the vapour phase. No water enters or leaves, and no chemical reaction occurs. Which pair correctly gives the total amount of water molecules in both phases combined and the amount of oxygen atoms remaining specifically in the vapour phase?
ⓐ. \(0.10\,\mathrm{mol}\) molecules and \(0.10\,\mathrm{mol}\) oxygen atoms
ⓑ. \(0.30\,\mathrm{mol}\) molecules and \(0.30\,\mathrm{mol}\) oxygen atoms
ⓒ. \(0.20\,\mathrm{mol}\) molecules and \(0.10\,\mathrm{mol}\) oxygen atoms
ⓓ. \(0.30\,\mathrm{mol}\) molecules and \(0.10\,\mathrm{mol}\) oxygen atoms
Correct Answer: \(0.30\,\mathrm{mol}\) molecules and \(0.10\,\mathrm{mol}\) oxygen atoms
Explanation: \(\textbf{Distinguishing a phase change from a chemical change:}\)
Condensation converts water vapour into liquid water.
The chemical formula remains \(\mathrm{H_2O}\).
The process does not destroy water molecules or change the numbers of hydrogen and oxygen atoms within them.
\(\textbf{Calculating the condensed amount:}\)
The initial amount of water molecules is
\[
n_{\mathrm{H_2O,initial}}=0.30\,\mathrm{mol}
\]
Two-thirds condenses.
\[
n_{\mathrm{H_2O,liquid}}=\frac23(0.30)
\]
\[
n_{\mathrm{H_2O,liquid}}=0.20\,\mathrm{mol}
\]
\(\textbf{Determining the remaining vapour amount:}\)
\[
n_{\mathrm{H_2O,vapour}}=0.30-0.20
\]
\[
n_{\mathrm{H_2O,vapour}}=0.10\,\mathrm{mol}
\]
\(\textbf{Checking the total molecular inventory:}\)
The two phases contain
\[
n_{\mathrm{H_2O,total}}=0.20+0.10
\]
\[
n_{\mathrm{H_2O,total}}=0.30\,\mathrm{mol}
\]
The total amount of water molecules remains unchanged.
\(\textbf{Counting oxygen atoms in the vapour only:}\)
Every water molecule contains one oxygen atom.
Therefore,
\[
n_{\mathrm{O,vapour}}=n_{\mathrm{H_2O,vapour}}
\]
\[
n_{\mathrm{O,vapour}}=0.10\,\mathrm{mol}
\]
\(\textbf{Independent hydrogen-atom check:}\)
The vapour contains
\[
n_{\mathrm{H,vapour}}=2(0.10)=0.20\,\mathrm{mol}
\]
of hydrogen atoms.
The liquid contains
\[
n_{\mathrm{H,liquid}}=2(0.20)=0.40\,\mathrm{mol}
\]
of hydrogen atoms.
The total hydrogen amount is \(0.60\,\mathrm{mol}\), identical to that in the initial vapour.
The phase-specific molecular amount changes, but the total chemical-entity and constituent-atom inventories remain conserved.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{H_2O,total}}=0.30\,\mathrm{mol},\quad n_{\mathrm{O,vapour}}=0.10\,\mathrm{mol}}
\]
320. A researcher compares four reported measurements for a pure sample of ammonium sulphate, \(\mathrm{(NH_4)_2SO_4}\). The sample contains exactly \(0.10\,\mathrm{mol}\) of formula units.
| Reported quantity | Measured value |
| P. Amount of nitrogen atoms | 0.20 mol |
| Q. Amount of hydrogen atoms | 0.80 mol |
| R. Amount of oxygen atoms | 0.40 mol |
| S. Total amount of constituent atoms | 1.40 mol |
Which conclusion correctly evaluates these four reported values?
ⓐ. All four are consistent with the formula.
ⓑ. P, Q and R are consistent, but S is incorrect.
ⓒ. P and S are consistent, but Q and R are incorrect.
ⓓ. Q, R and S are consistent, but P is incorrect.
Correct Answer: P, Q and R are consistent, but S is incorrect.
Explanation: The chemical formula contains two ammonium groups and one sulphate group per formula unit.
Expanding the groups gives two nitrogen atoms, eight hydrogen atoms, one sulphur atom and four oxygen atoms.
For \(0.10\,\mathrm{mol}\) of formula units, the constituent atomic amounts are proportional to these subscripts.
The nitrogen amount is
\[
n_N=2(0.10)=0.20\,\mathrm{mol}
\]
Therefore, report P is correct.
The hydrogen amount is
\[
n_H=8(0.10)=0.80\,\mathrm{mol}
\]
Therefore, report Q is correct.
The oxygen amount is
\[
n_O=4(0.10)=0.40\,\mathrm{mol}
\]
Therefore, report R is correct.
The sulphur amount, omitted from the table's first three reports, is
\[
n_S=1(0.10)=0.10\,\mathrm{mol}
\]
The total constituent-atom amount must include sulphur along with nitrogen, hydrogen and oxygen.
Therefore,
\[
n_{\mathrm{atoms,total}}=0.20+0.80+0.10+0.40
\]
\[
n_{\mathrm{atoms,total}}=1.50\,\mathrm{mol}
\]
Report S gives only \(1.40\,\mathrm{mol}\), exactly the sum that would result from neglecting sulphur.
This omission does not make the three element-specific measurements incorrect.
A total atom count must include every element represented in the complete formula.
Thus, P, Q and R are consistent, while S is not.
321. A container initially holds \(0.30\,\mathrm{mol}\) of pure carbon dioxide molecules. Exactly one-third of these molecules is physically removed. Subsequently, \(0.10\,\mathrm{mol}\) of pure nitrogen gas is introduced. The two remaining gases do not react. What are the total mass of the final gas mixture and the fraction of its constituent atoms that are oxygen atoms? (Atomic masses: C = 12, N = 14, O = 16)
ⓐ. 8.8 g and \(\dfrac12\)
ⓑ. 11.6 g and \(\dfrac23\)
ⓒ. 14.4 g and \(\dfrac12\)
ⓓ. 11.6 g and \(\dfrac12\)
Correct Answer: 11.6 g and \(\dfrac12\)
Explanation: \(\textbf{Applying the physical removal:}\)
The initial carbon dioxide amount is
\[
n_{\mathrm{CO_2,initial}}=0.30\,\mathrm{mol}
\]
One-third of the molecules is removed.
\[
n_{\mathrm{CO_2,removed}}=\frac13(0.30)
\]
\[
n_{\mathrm{CO_2,removed}}=0.10\,\mathrm{mol}
\]
Therefore,
\[
n_{\mathrm{CO_2,remaining}}=0.30-0.10
\]
\[
n_{\mathrm{CO_2,remaining}}=0.20\,\mathrm{mol}
\]
\(\textbf{Constructing the final molecular inventory:}\)
The introduced nitrogen amount is \(0.10\,\mathrm{mol}\).
Since the gases do not react,
\[
n_{\mathrm{gas,total}}=0.20+0.10
\]
\[
n_{\mathrm{gas,total}}=0.30\,\mathrm{mol}
\]
\(\textbf{Calculating final mixture mass:}\)
Carbon dioxide has molar mass
\[
M_{\mathrm{CO_2}}=12+2(16)=44\,\mathrm{g\,mol^{-1}}
\]
Nitrogen gas has molar mass
\[
M_{\mathrm{N_2}}=2(14)=28\,\mathrm{g\,mol^{-1}}
\]
The retained carbon dioxide mass is
\[
m_{\mathrm{CO_2}}=0.20(44)
\]
\[
m_{\mathrm{CO_2}}=8.8\,\text{g}
\]
The introduced nitrogen mass is
\[
m_{\mathrm{N_2}}=0.10(28)
\]
\[
m_{\mathrm{N_2}}=2.8\,\text{g}
\]
Thus,
\[
m_{\mathrm{final}}=8.8+2.8
\]
\[
m_{\mathrm{final}}=11.6\,\text{g}
\]
\(\textbf{Counting all constituent atoms:}\)
Every carbon dioxide molecule contains three atoms.
Every nitrogen molecule contains two atoms.
Therefore,
\[
n_{\mathrm{atoms,total}}=3(0.20)+2(0.10)
\]
\[
n_{\mathrm{atoms,total}}=0.60+0.20
\]
\[
n_{\mathrm{atoms,total}}=0.80\,\mathrm{mol}
\]
\(\textbf{Determining the oxygen-atom fraction:}\)
Only carbon dioxide contributes oxygen.
Each carbon dioxide molecule contains two oxygen atoms.
\[
n_O=2(0.20)=0.40\,\mathrm{mol}
\]
Therefore,
\[
f_{\mathrm{O,atoms}}=\frac{0.40}{0.80}
\]
\[
f_{\mathrm{O,atoms}}=\frac12
\]
\(\textbf{Chemical interpretation:}\)
The final molecular amount happens to equal the initial molecular amount, but the chemical composition differs.
Removing carbon dioxide and introducing nitrogen changes the constituent-atom inventory and total mass.
The number of gas molecules alone does not determine either quantity.
The final atom fraction must be calculated from the actual species present after both physical operations.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{final}}=11.6\,\text{g},\quad f_{\mathrm{O,atoms}}=\frac12}
\]
322. Consider a crystalline sample of sodium chloride that is completely dissolved in water, with no chemical reaction other than the stated separation of constituent ions. Which of the following statements are correct?
Statement I: The amount of sodium atoms represented by the original sodium chloride formula units is unchanged by dissolution.
Statement II: Complete dissociation gives twice as many independently dispersed solute ions as the number of original sodium chloride formula units.
Statement III: Dissolution changes the empirical sodium-to-chlorine atomic ratio from \(1:1\) to \(1:2\).
Statement IV: The fact that one mole of sodium chloride formula units produces two moles of ions proves that the original crystal consisted of discrete NaCl molecules.
ⓐ. III and IV only
ⓑ. II and III only
ⓒ. I, II and IV only
ⓓ. I and II only
Correct Answer: I and II only
Explanation: Statement I is correct because dissolution does not create or destroy sodium atoms.
Each original sodium chloride formula unit represents one sodium constituent and one chloride constituent.
Separating those ions into an aqueous solution does not alter the number of sodium nuclei present.
Statement II is correct under the explicitly stated complete-dissociation assumption.
Each sodium chloride formula unit corresponds to one sodium ion and one chloride ion.
Therefore, one mole of original formula units produces one mole of sodium ions and one mole of chloride ions.
The total is two moles of independently dispersed solute ions.
Statement III is incorrect because the constituent sodium-to-chlorine atomic ratio remains \(1:1\).
A change in physical arrangement or ionic dispersion does not change the numbers of the two elements.
Statement IV is incorrect because sodium chloride is an ionic crystalline substance.
Its formula specifies the simplest ratio of ions in an extended lattice.
The numerical correspondence between formula units and separated ions does not establish that independent NaCl molecules were present in the solid.
The comparison requires three different counting ideas: formula units used to represent ionic composition, individual constituent atoms conserved during dissolution, and separately dispersed ions counted after dissolution.
Only Statements I and II are correct.
323. A non-reacting mixture contains only ammonia, \(\mathrm{NH_3}\), and water vapour. The total amount of gas molecules is \(0.25\,\mathrm{mol}\). Independent particle counting establishes that the combined amount of constituent atoms is \(0.95\,\mathrm{mol}\). What are the amounts of ammonia and water molecules, respectively, and the total mass of the mixture? (Atomic masses: N = 14, H = 1, O = 16)
ⓐ. \(0.20\,\mathrm{mol}\) ammonia, \(0.05\,\mathrm{mol}\) water and 4.3 g
ⓑ. \(0.05\,\mathrm{mol}\) ammonia, \(0.20\,\mathrm{mol}\) water and 4.45 g
ⓒ. \(0.20\,\mathrm{mol}\) ammonia, \(0.05\,\mathrm{mol}\) water and 4.45 g
ⓓ. \(0.15\,\mathrm{mol}\) ammonia, \(0.10\,\mathrm{mol}\) water and 4.35 g
Correct Answer: \(0.20\,\mathrm{mol}\) ammonia, \(0.05\,\mathrm{mol}\) water and 4.3 g
Explanation: \(\textbf{Identifying the atomicity difference:}\)
Every ammonia molecule contains one nitrogen atom and three hydrogen atoms.
Its total atomicity is four.
Every water molecule contains two hydrogen atoms and one oxygen atom.
Its total atomicity is three.
This difference permits the molecular composition to be inferred from the total molecule and constituent-atom counts.
\(\textbf{Representing the molecular amounts:}\)
Let \(x\) be the amount of ammonia molecules and \(y\) the amount of water molecules.
The total molecular amount gives
\[
x+y=0.25 \qquad (1)
\]
\(\textbf{Using the total constituent-atom amount:}\)
Ammonia contributes four moles of atoms per mole of molecules.
Water contributes three.
Therefore,
\[
4x+3y=0.95 \qquad (2)
\]
\(\textbf{Solving for the two species:}\)
Multiplying Equation (1) by three,
\[
3x+3y=0.75
\]
Subtracting this relation from Equation (2),
\[
x=0.95-0.75
\]
\[
x=0.20\,\mathrm{mol}
\]
Consequently,
\[
y=0.25-0.20
\]
\[
y=0.05\,\mathrm{mol}
\]
\(\textbf{Calculating individual gas masses:}\)
The ammonia molar mass is
\[
M_{\mathrm{NH_3}}=14+3(1)
\]
\[
M_{\mathrm{NH_3}}=17\,\mathrm{g\,mol^{-1}}
\]
Its mass is
\[
m_{\mathrm{NH_3}}=0.20(17)
\]
\[
m_{\mathrm{NH_3}}=3.4\,\text{g}
\]
The water molar mass is
\[
M_{\mathrm{H_2O}}=18\,\mathrm{g\,mol^{-1}}
\]
Its mass is
\[
m_{\mathrm{H_2O}}=0.05(18)
\]
\[
m_{\mathrm{H_2O}}=0.9\,\text{g}
\]
\(\textbf{Determining total mass:}\)
\[
m_{\mathrm{total}}=3.4+0.9
\]
\[
m_{\mathrm{total}}=4.3\,\text{g}
\]
\(\textbf{Checking both measured particle amounts:}\)
The recovered molecule amounts sum to
\[
0.20+0.05=0.25\,\mathrm{mol}
\]
Their total constituent-atom amount is
\[
4(0.20)+3(0.05)=0.80+0.15
\]
\[
=0.95\,\mathrm{mol}
\]
Both measurements are reproduced.
The inference relies on the different molecular atomicities rather than differences in molar mass.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{NH_3}}=0.20\,\mathrm{mol},\quad n_{\mathrm{H_2O}}=0.05\,\mathrm{mol},\quad m=4.3\,\text{g}}
\]
324. Two pure molecular compounds P and Q have molecular formulae \(\mathrm{C_2H_4O_2}\) and \(\mathrm{C_3H_6O_3}\), respectively. Equal masses are selected from the two compounds. Which pair correctly compares the total numbers of constituent atoms and the numbers of molecules in the samples, P:Q? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. Total constituent atoms \(2:3\); molecules \(1:1\)
ⓑ. Total constituent atoms \(1:1\); molecules \(2:3\)
ⓒ. Total constituent atoms \(3:2\); molecules \(3:2\)
ⓓ. Total constituent atoms \(1:1\); molecules \(3:2\)
Correct Answer: Total constituent atoms \(1:1\); molecules \(3:2\)
Explanation: \(\textbf{Recognising the shared empirical composition:}\)
The molecular formula of P is \(\mathrm{C_2H_4O_2}\).
Dividing all its subscripts by two gives empirical formula \(\mathrm{CH_2O}\).
The molecular formula of Q is \(\mathrm{C_3H_6O_3}\).
Dividing all its subscripts by three also gives \(\mathrm{CH_2O}\).
Both compounds therefore have the same elemental atomic ratios.
\(\textbf{Comparing their molar masses:}\)
For P,
\[
M_P=2(12)+4(1)+2(16)
\]
\[
M_P=60\,\mathrm{g\,mol^{-1}}
\]
For Q,
\[
M_Q=3(12)+6(1)+3(16)
\]
\[
M_Q=90\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Comparing molecule counts at equal mass:}\)
Let each sample weigh \(m\) grams.
The molecule amounts are
\[
n_P=\frac{m}{60}
\]
\[
n_Q=\frac{m}{90}
\]
Their ratio is
\[
N_P:N_Q=\frac{m}{60}:\frac{m}{90}
\]
\[
N_P:N_Q=3:2
\]
\(\textbf{Counting total atoms per molecule:}\)
P contains
\[
a_P=2+4+2
\]
\[
a_P=8
\]
atoms per molecule.
Q contains
\[
a_Q=3+6+3
\]
\[
a_Q=12
\]
atoms per molecule.
\(\textbf{Comparing total constituent-atom amounts:}\)
The total atomic amounts in equal-mass samples are
\[
n_{\mathrm{atoms},P}=8\left(\frac{m}{60}\right)
\]
\[
n_{\mathrm{atoms},Q}=12\left(\frac{m}{90}\right)
\]
Simplifying,
\[
n_{\mathrm{atoms},P}=\frac{2m}{15}
\]
\[
n_{\mathrm{atoms},Q}=\frac{2m}{15}
\]
Therefore,
\[
N_{\mathrm{atoms},P}:N_{\mathrm{atoms},Q}=1:1
\]
\(\textbf{Explaining the invariant:}\)
The molecule of Q is larger than the molecule of P by the same factor by which its molar mass is larger.
Consequently, fewer Q molecules occur in an equal mass, but each contains proportionally more atoms.
These effects exactly compensate.
More generally, molecular multiples of the same empirical formula contain equal total numbers of constituent atoms per unit mass when their constituent atomic masses are the same.
They need not contain equal numbers of molecules.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{atoms},P}:N_{\mathrm{atoms},Q}=1:1,\quad N_P:N_Q=3:2}
\]
325. A non-reacting gaseous mixture contains only carbon dioxide, \(\mathrm{CO_2}\), and sulphur dioxide, \(\mathrm{SO_2}\). Its total molecular amount is \(0.20\,\mathrm{mol}\). The total mass is measured as 12.0 g, and an independent measurement shows that the mixture contains \(0.40\,\mathrm{mol}\) of oxygen atoms. Which conclusion is correct? (Atomic masses: C = 12, S = 32, O = 16)
ⓐ. The \(\mathrm{SO_2}\) mole fraction is \(0.80\); oxygen-atom data do not independently fix it.
ⓑ. The sulphur dioxide mole fraction is \(0.20\), and the oxygen-atom measurement uniquely determines it.
ⓒ. The sulphur dioxide mole fraction is \(0.80\), and both the mass and oxygen-atom measurements independently determine it.
ⓓ. The sulphur dioxide mole fraction is \(0.60\), and the oxygen-atom measurement is inconsistent.
Correct Answer: The \(\mathrm{SO_2}\) mole fraction is \(0.80\); oxygen-atom data do not independently fix it.
Explanation: \(\textbf{Identifying which measurement contains composition information:}\)
Both carbon dioxide and sulphur dioxide molecules contain two oxygen atoms.
Therefore, any mixture containing \(0.20\,\mathrm{mol}\) of these molecules necessarily contains
\[
n_{O}=2(0.20)
\]
\[
n_O=0.40\,\mathrm{mol}
\]
of oxygen atoms.
The reported oxygen-atom amount is consistent with the molecular amount.
However, it is independent of the relative amounts of carbon dioxide and sulphur dioxide.
\(\textbf{Representing the unknown mixture composition:}\)
Let \(x\) be the amount of sulphur dioxide.
The carbon dioxide amount is
\[
n_{\mathrm{CO_2}}=0.20-x
\]
\(\textbf{Using the different molecular masses:}\)
Carbon dioxide has molar mass
\[
M_{\mathrm{CO_2}}=12+2(16)
\]
\[
M_{\mathrm{CO_2}}=44\,\mathrm{g\,mol^{-1}}
\]
Sulphur dioxide has molar mass
\[
M_{\mathrm{SO_2}}=32+2(16)
\]
\[
M_{\mathrm{SO_2}}=64\,\mathrm{g\,mol^{-1}}
\]
Their combined measured mass is 12.0 g.
Therefore,
\[
44(0.20-x)+64x=12.0
\]
\[
8.8-44x+64x=12.0
\]
\[
20x=3.2
\]
\[
x=0.16\,\mathrm{mol}
\]
\(\textbf{Recovering the component amounts:}\)
\[
n_{\mathrm{SO_2}}=0.16\,\mathrm{mol}
\]
\[
n_{\mathrm{CO_2}}=0.20-0.16
\]
\[
n_{\mathrm{CO_2}}=0.04\,\mathrm{mol}
\]
\(\textbf{Calculating the sulphur dioxide mole fraction:}\)
\[
X_{\mathrm{SO_2}}=\frac{0.16}{0.20}
\]
\[
X_{\mathrm{SO_2}}=0.80
\]
\(\textbf{Independent mass verification:}\)
The carbon dioxide mass is
\[
m_{\mathrm{CO_2}}=0.04(44)=1.76\,\text{g}
\]
The sulphur dioxide mass is
\[
m_{\mathrm{SO_2}}=0.16(64)=10.24\,\text{g}
\]
Thus,
\[
m_{\mathrm{total}}=1.76+10.24
\]
\[
m_{\mathrm{total}}=12.0\,\text{g}
\]
\(\textbf{Understanding redundant versus independent constraints:}\)
The total molecule amount and oxygen-atom amount are not two independent composition constraints in this case.
Every allowed molecular species contributes exactly two oxygen atoms, so the oxygen measurement follows automatically from the molecule count.
By contrast, the species have different molar masses.
The total mass therefore changes with composition and provides an independent equation.
The mixture composition is recoverable from total molecular amount and total mass, while the oxygen-atom measurement serves only as a consistency check.
\(\textbf{Final conclusion:}\)
The sulphur dioxide mole fraction is \(0.80\). The reported oxygen-atom amount is consistent but does not independently identify the mixture composition.
326. A sample contains only two isotopes of an element X, having isotopic masses \(10\,\mathrm{u}\) and \(11\,\mathrm{u}\). Its average atomic mass is \(10.8\,\mathrm{u}\). A second sample of the same element has average atomic mass \(10.6\,\mathrm{u}\). Equal numbers of atoms from the two samples are mixed without any loss. What is the percentage of the lighter isotope in the final mixture?
ⓐ. \(20\%\)
ⓑ. \(25\%\)
ⓒ. \(30\%\)
ⓓ. \(40\%\)
Correct Answer: \(30\%\)
Explanation: \(\textbf{Extracting the isotope composition of the first sample:}\)
Let \(f_1\) denote the atom fraction of the heavier isotope in the first sample.
The average atomic mass is the atom-number-weighted mean of the isotopic masses.
\[
10(1-f_1)+11f_1=10.8
\]
Expanding,
\[
10+f_1=10.8
\]
\[
f_1=0.8
\]
Thus, the first sample contains 80% heavier-isotope atoms and 20% lighter-isotope atoms.
\(\textbf{Extracting the second sample composition:}\)
Let \(f_2\) be the heavier-isotope atom fraction in the second sample.
\[
10(1-f_2)+11f_2=10.6
\]
\[
10+f_2=10.6
\]
\[
f_2=0.6
\]
The second sample contains 60% heavier-isotope atoms and 40% lighter-isotope atoms.
\(\textbf{Applying the equal-atom mixing condition:}\)
Let each original sample contribute \(N\) atoms.
The number of lighter-isotope atoms contributed by the first sample is \(0.20N\).
The number contributed by the second sample is \(0.40N\).
The final number of lighter-isotope atoms is
\[
N_{\mathrm{light}}=0.20N+0.40N
\]
\[
N_{\mathrm{light}}=0.60N
\]
The final total number of atoms is
\[
N_{\mathrm{total}}=N+N=2N
\]
Therefore,
\[
f_{\mathrm{light,final}}=\frac{0.60N}{2N}
\]
\[
f_{\mathrm{light,final}}=0.30
\]
\(\textbf{Checking the final average atomic mass:}\)
The final heavier-isotope fraction is \(0.70\).
Consequently,
\[
\overline{m}_{\mathrm{final}}=10(0.30)+11(0.70)
\]
\[
\overline{m}_{\mathrm{final}}=3.0+7.7
\]
\[
\overline{m}_{\mathrm{final}}=10.7\,\mathrm{u}
\]
This is also the arithmetic mean of the original average atomic masses because equal numbers of atoms were mixed.
The percentage requested is an atom percentage, not a mass percentage.
The equal-atom condition is essential to the simple averaging step.
\(\textbf{Final answer:}\)
\[
\boxed{\%\text{ lighter isotope}=30\%}
\]
327. A pure sample of an element Y consists of isotopes with masses \(24\,\mathrm{u}\) and \(26\,\mathrm{u}\). Its average atomic mass is \(25\,\mathrm{u}\). The element forms an oxide with formula \(\mathrm{YO}\). If a second sample of Y contains 75% of the \(26\,\mathrm{u}\) isotope by number, which statement correctly compares the molar masses of \(\mathrm{YO}\) prepared from the two samples? (Atomic mass of O = \(16\,\mathrm{u}\))
ⓐ. The second oxide has a molar mass greater by \(0.5\,\mathrm{g\,mol^{-1}}\).
ⓑ. The second oxide has a molar mass greater by \(1.0\,\mathrm{g\,mol^{-1}}\).
ⓒ. The second oxide has a molar mass greater by \(1.5\,\mathrm{g\,mol^{-1}}\).
ⓓ. The two oxides have identical molar masses because their chemical formulae are identical.
Correct Answer: The second oxide has a molar mass greater by \(0.5\,\mathrm{g\,mol^{-1}}\).
Explanation: \(\textbf{Determining the first sample's average mass:}\)
The first sample is already specified to have an average atomic mass of \(25\,\mathrm{u}\).
Its oxide contains one Y atom and one oxygen atom per formula unit.
Therefore, the average formula mass of this oxide is
\[
m_{\mathrm{YO,first}}=25+16
\]
\[
m_{\mathrm{YO,first}}=41\,\mathrm{u}
\]
The corresponding molar mass is
\[
M_{\mathrm{YO,first}}=41\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Calculating the altered isotopic average:}\)
In the second sample, the heavier isotope has atom fraction 0.75.
The lighter isotope consequently has atom fraction 0.25.
The new average atomic mass is
\[
\overline{m}_{Y,\mathrm{second}}=24(0.25)+26(0.75)
\]
\[
\overline{m}_{Y,\mathrm{second}}=6.0+19.5
\]
\[
\overline{m}_{Y,\mathrm{second}}=25.5\,\mathrm{u}
\]
\(\textbf{Transferring the isotope change to the oxide:}\)
The oxide formula remains \(\mathrm{YO}\).
Each formula unit still contains one Y atom and one oxygen atom.
The second oxide's average formula mass is
\[
m_{\mathrm{YO,second}}=25.5+16
\]
\[
m_{\mathrm{YO,second}}=41.5\,\mathrm{u}
\]
Therefore,
\[
M_{\mathrm{YO,second}}=41.5\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Comparing the two molar masses:}\)
\[
\Delta M=41.5-41.0
\]
\[
\Delta M=0.5\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Chemical interpretation:}\)
Isotopic substitution changes the average atomic mass of Y without changing its chemical symbol or the oxide's stoichiometric formula.
Because the oxide contains one Y atom per formula unit, the change in oxide molar mass equals the change in Y's average atomic mass expressed numerically in \(\mathrm{g\,mol^{-1}}\).
If the formula contained two Y atoms, the corresponding molar-mass change would be doubled.
Identical chemical formulae do not guarantee identical molar masses when the isotopic compositions differ.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta M_{\mathrm{YO}}=+0.5\,\mathrm{g\,mol^{-1}}}
\]
328. A mixture contains only \(\mathrm{CO}\) and \(\mathrm{CO_2}\). The total mass is \(10.0\,\mathrm{g}\), and the total amount of oxygen atoms present is \(0.40\,\mathrm{mol}\). What is the amount of carbon monoxide in the mixture? (Atomic masses: C = 12, O = 16)
ⓐ. \(0.10\,\mathrm{mol}\)
ⓑ. \(0.20\,\mathrm{mol}\)
ⓒ. \(0.30\,\mathrm{mol}\)
ⓓ. \(0.40\,\mathrm{mol}\)
Correct Answer: \(0.20\,\mathrm{mol}\)
Explanation: \(\textbf{Representing the two molecular species:}\)
Let \(x\) be the amount of carbon monoxide and \(y\) the amount of carbon dioxide.
Carbon monoxide contains one oxygen atom per molecule.
Carbon dioxide contains two oxygen atoms per molecule.
The measured oxygen-atom amount therefore gives
\[
x+2y=0.40 \qquad (1)
\]
\(\textbf{Constructing the mass equation:}\)
The molar mass of carbon monoxide is
\[
M_{\mathrm{CO}}=12+16
\]
\[
M_{\mathrm{CO}}=28\,\mathrm{g\,mol^{-1}}
\]
The molar mass of carbon dioxide is
\[
M_{\mathrm{CO_2}}=12+2(16)
\]
\[
M_{\mathrm{CO_2}}=44\,\mathrm{g\,mol^{-1}}
\]
The total mass gives
\[
28x+44y=10.0 \qquad (2)
\]
\(\textbf{Eliminating one unknown:}\)
From Equation (1),
\[
x=0.40-2y
\]
Substitute into Equation (2).
\[
28(0.40-2y)+44y=10.0
\]
\[
11.2-56y+44y=10.0
\]
\[
-12y=-1.2
\]
\[
y=0.10\,\mathrm{mol}
\]
\(\textbf{Recovering carbon monoxide and checking physical admissibility:}\)
The carbon dioxide amount is positive and hence physically possible.
Using the oxygen-atom inventory,
\[
x=0.40-2(0.10)
\]
\[
x=0.20\,\mathrm{mol}
\]
Both component amounts are nonnegative and satisfy the initial elemental constraint.
They also reproduce the measured sample mass:
\[
0.20(28)+0.10(44)=10.0\,\text{g}
\]
\(\textbf{Independent bound check:}\)
For each mole of oxygen atoms, carbon monoxide contributes 28 g of mass.
Carbon dioxide contributes 22 g of mass per mole of oxygen atoms.
Thus, a mixture containing \(0.40\,\mathrm{mol}\) of oxygen atoms must have mass between
\[
m_{\min}=0.40(22)=8.8\,\text{g}
\]
and
\[
m_{\max}=0.40(28)=11.2\,\text{g}
\]
The measured mass of 10.0 g lies between these bounds, as a two-component mixture must.
The separately calculated carbon monoxide and carbon dioxide masses sum to the given mass.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{CO}}=0.20\,\mathrm{mol}}
\]
329. A compound has formula \(\mathrm{X_2(SO_4)_3}\), where X is an unknown element. The molar mass of the compound is \(400\,\mathrm{g\,mol^{-1}}\). Which of the following correctly gives the atomic mass of X and the amount of sulphur atoms in an \(80.0\,\mathrm{g}\) sample of the compound? (Atomic masses: S = 32, O = 16)
ⓐ. \(56\,\mathrm{u}\) and \(0.60\,\mathrm{mol}\)
ⓑ. \(56\,\mathrm{u}\) and \(0.20\,\mathrm{mol}\)
ⓒ. \(112\,\mathrm{u}\) and \(0.60\,\mathrm{mol}\)
ⓓ. \(112\,\mathrm{u}\) and \(0.20\,\mathrm{mol}\)
Correct Answer: \(56\,\mathrm{u}\) and \(0.60\,\mathrm{mol}\)
Explanation: \(\textbf{Expanding the grouped formula:}\)
The formula \(\mathrm{X_2(SO_4)_3}\) contains two X atoms, three sulphur atoms and twelve oxygen atoms per formula unit.
The subscript outside the parentheses multiplies every atom within the sulphate group.
\(\textbf{Constructing the molar-mass relation:}\)
Let the atomic mass of X be \(a\,\mathrm{u}\).
The corresponding numerical molar-mass contribution from two X atoms is \(2a\,\mathrm{g\,mol^{-1}}\).
The sulphate contribution is
\[
3[32+4(16)]
\]
\[
=3(96)
\]
\[
=288\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
2a+288=400
\]
\(\textbf{Solving for the atomic mass:}\)
\[
2a=400-288
\]
\[
2a=112
\]
\[
a=56
\]
Thus, X has atomic mass \(56\,\mathrm{u}\).
\(\textbf{Determining the formula-unit amount:}\)
The sample mass is \(80.0\,\mathrm{g}\).
\[
n_{\mathrm{compound}}=\frac{m}{M}
\]
\[
n_{\mathrm{compound}}=\frac{80.0\,\mathrm{g}}{400\,\mathrm{g\,mol^{-1}}}
\]
\[
n_{\mathrm{compound}}=0.20\,\mathrm{mol}
\]
\(\textbf{Counting sulphur atoms:}\)
Each formula unit contains three sulphur atoms.
Therefore,
\[
n_S=3n_{\mathrm{compound}}
\]
\[
n_S=3(0.20)
\]
\[
n_S=0.60\,\mathrm{mol}
\]
\(\textbf{Verifying the reconstructed formula mass:}\)
Substituting the inferred atomic mass,
\[
M=2(56)+3(32)+12(16)
\]
\[
M=112+96+192
\]
\[
M=400\,\mathrm{g\,mol^{-1}}
\]
The reconstructed value matches the supplied molar mass.
The sulphur amount is three times the amount of formula units, not equal to it.
\(\textbf{Final answer:}\)
\[
\boxed{m_X=56\,\mathrm{u},\quad n_S=0.60\,\mathrm{mol}}
\]
330. A pure molecular compound contains carbon, hydrogen and oxygen, with molecular formula \(\mathrm{C_2H_6O}\). A second pure compound has molecular formula \(\mathrm{C_4H_{12}O_2}\). Equal numbers of molecules are selected from the two compounds. Which statement correctly compares the total numbers of constituent atoms and their masses? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. The second sample contains twice as many atoms but has the same mass.
ⓑ. The second sample contains the same number of atoms but has twice the mass.
ⓒ. The second sample contains twice as many atoms and has twice the mass of the first.
ⓓ. Both samples contain equal numbers of atoms and have equal masses.
Correct Answer: The second sample contains twice as many atoms and has twice the mass of the first.
Explanation: The molecular formula \(\mathrm{C_4H_{12}O_2}\) has every subscript exactly twice the corresponding subscript in \(\mathrm{C_2H_6O}\).
Therefore, one molecule of the second compound contains twice as many atoms of each element as one molecule of the first.
The first molecule contains two carbon atoms, six hydrogen atoms and one oxygen atom.
Its total atomicity is
\[
a_1=2+6+1=9
\]
The second molecule contains four carbon atoms, twelve hydrogen atoms and two oxygen atoms.
Its total atomicity is
\[
a_2=4+12+2=18
\]
Thus, each molecule of the second compound contains twice the total number of constituent atoms.
Since the samples contain equal numbers of molecules, the total atom-number ratio is \(1:2\).
The molar mass of the first compound is
\[
M_1=2(12)+6(1)+16
\]
\[
M_1=46\,\mathrm{g\,mol^{-1}}
\]
The molar mass of the second compound is
\[
M_2=4(12)+12(1)+2(16)
\]
\[
M_2=92\,\mathrm{g\,mol^{-1}}
\]
Thus,
\[
\frac{M_2}{M_1}=\frac{92}{46}=2
\]
Equal numbers of molecules correspond to equal molecular amounts.
For equal molecular amounts, the sample-mass ratio equals the molar-mass ratio.
Consequently, the second sample has twice the mass of the first.
This conclusion follows from the molecular formulae and constituent atomic masses, not merely from the shared empirical formula.
The two compounds have the same empirical composition but different molecular formulae and molar masses.
A molecular formula specifies the actual atom counts in each molecule, while an empirical formula specifies only the simplest whole-number ratio.
Both the atom count and molecular mass are doubled in this comparison.
331. A sealed container initially contains only a gaseous element X. Every particle is a diatomic molecule \(\mathrm{X_2}\). A chemical change occurs, after which the container contains equal numbers of \(\mathrm{X_2}\) and \(\mathrm{X_3}\) molecules, with no other particles present. No matter enters or leaves the container. Which statement is necessarily correct?
ⓐ. The final contents constitute a compound because two different molecular formulae are present.
ⓑ. The final contents are a mixture of two molecular forms of X, with the atom count conserved.
ⓒ. The final contents remain a single pure molecular substance because both species contain the same element.
ⓓ. The final number of molecules must equal the initial number because the container is sealed.
Correct Answer: The final contents are a mixture of two molecular forms of X, with the atom count conserved.
Explanation: The initial substance contains only molecules of \(\mathrm{X_2}\).
Every initial molecule consists exclusively of atoms of element X.
The final particles are \(\mathrm{X_2}\) and \(\mathrm{X_3}\), which also contain only element X.
Therefore, no compound containing different elements has been formed.
However, the final material contains two distinct molecular species.
A mixture can contain different molecular forms of the same element without containing a chemical compound.
Thus, Option A incorrectly equates different molecular formulae with the formation of a compound.
Option C is also incorrect because the final container contains two distinct molecular species rather than one pure molecular substance.
The chemical identity of an element is determined by the type of atom, whereas the identity of a particular molecular substance also depends on its molecular composition and arrangement.
If the final mixture contains \(N\) molecules of each species, its total atom count is \(2N+3N=5N\).
The initial atom count must also have been \(5N\), even though the original number of \(\mathrm{X_2}\) molecules was \(5N/2\).
Therefore, the total number of molecules need not remain constant.
A closed system conserves its constituent atoms and mass during an ordinary chemical reaction, not necessarily the number of molecules.
The correct description is a mixture of molecular forms of one element with conservation of its total atomic inventory.
332. A pure sample of a hypothetical element X contains two isotopes, \(^{20}\mathrm{X}\) and \(^{22}\mathrm{X}\). The element reacts with oxygen to produce a pure oxide having the elemental formula \(\mathrm{XO}\). Two oxide samples are prepared using different proportions of the isotopes of X, while the oxygen isotopic composition remains identical. Consider the following statements.
Statement I: Both oxide samples can have the same simplest X-to-O atomic ratio.
Statement II: The two oxide samples must have identical average formula masses because they have the same elemental formula.
Statement III: The observation that X has isotopes establishes a limitation of Dalton's original postulate that atoms of a given element are identical in mass.
Statement IV: Differences in isotopic abundance necessarily imply that the two samples are different chemical compounds.
Which statements are correct?
ⓐ. I and III only
ⓑ. I, II and III only
ⓒ. II and IV only
ⓓ. I, III and IV only
Correct Answer: I and III only
Explanation: Statement I is correct because the formula \(\mathrm{XO}\) fixes the number ratio of X atoms to oxygen atoms as \(1:1\).
Changing the isotopic abundances of X does not change its elemental identity or the stoichiometric subscripts.
Both preparations can therefore retain the same elemental formula.
Statement II is incorrect because the isotopes of X have different masses.
Changing their relative abundances changes the average atomic mass of X in the sample.
Since each oxide formula unit contains one X atom, its average formula mass also changes when the average mass of X changes.
Statement III is correct because Dalton's original atomic theory treated atoms of the same element as identical in mass.
Isotopes demonstrate that atoms of one element can have different masses while retaining the same elemental identity.
This modifies that historical postulate without invalidating the importance of atoms in chemical combination.
Statement IV is incorrect because isotopic composition and elemental chemical composition are not the same classification criterion.
Two samples with different isotopic distributions may represent the same chemical compound at the elemental formula level.
The formula \(\mathrm{XO}\) does not need to be replaced merely because the relative numbers of the two isotopes change.
The central distinction is between the identity of an element, the isotopic masses of its atoms and the fixed elemental composition of its compound.
Only Statements I and III are correct.
333. Three sealed containers are examined using a method that identifies the exact chemical formula of every particle.
| Container | Observed particles | Additional observation |
| P | Only \(\mathrm{A_2B}\) molecules | Every molecule has the same formula |
| Q | \(\mathrm{A_2}\) and \(\mathrm{B_2}\) molecules | The relative amounts vary between samples |
| R | \(\mathrm{AB}\) and \(\mathrm{A_2B_2}\) molecules | Both molecular species are present in nonzero amounts |
A and B represent two different hypothetical elements. Which conclusion is scientifically justified?
ⓐ. P and R are necessarily pure compounds because every particle in both contains A and B.
ⓑ. Q is a compound because the total container contains atoms of two elements.
ⓒ. P is a pure compound, Q a mixture of elements, and R a mixture of distinct molecular species.
ⓓ. R must be a pure compound because \(\mathrm{AB}\) and \(\mathrm{A_2B_2}\) have the same A-to-B atomic ratio.
Correct Answer: P is a pure compound, Q a mixture of elements, and R a mixture of distinct molecular species.
Explanation: Container P contains only one identified molecular species, \(\mathrm{A_2B}\).
Every molecule has the same formula and contains atoms of two different elements chemically combined.
Under the stated observations, P is a pure molecular compound.
Container Q contains two different elemental molecular species, \(\mathrm{A_2}\) and \(\mathrm{B_2}\).
Because they remain separate species, their simultaneous presence does not itself create a chemical compound.
Their relative amounts can vary, which is consistent with a mixture.
Container R contains both \(\mathrm{AB}\) and \(\mathrm{A_2B_2}\) molecules.
The empirical formula of \(\mathrm{AB}\) is AB, and that of \(\mathrm{A_2B_2}\) is also AB.
However, their molecular formulae are different.
The problem identifies them as distinct molecular species present together.
Therefore, the contents are not a single pure molecular species merely because the two formulae share the same empirical ratio.
Option A overlooks that R contains two molecular species.
Option B incorrectly treats the presence of two elements in a container as sufficient evidence that they have chemically combined.
Option D confuses equal empirical compositions with identical molecular identities.
Classification requires examining the actual particles present, not merely the list of elements or the simplest overall atomic ratio.
334. In an experiment, two different elements X and Y react according to the particle-level description below.
Before reaction, the vessel contains six identical diatomic \(\mathrm{X_2}\) molecules and six identical diatomic \(\mathrm{Y_2}\) molecules. After reaction, exactly eight identical \(\mathrm{X_2Y}\) molecules are present together with two identical \(\mathrm{Y_2}\) molecules. No other particles are present, and no material enters or leaves the vessel. X and Y represent different elements.
Which conclusion correctly evaluates this record?
ⓐ. It is consistent because the total number of molecules decreases while both elemental atom counts remain conserved.
ⓑ. It is inconsistent because the final vessel contains fewer molecules than the initial vessel.
ⓒ. It is consistent because eight product molecules require only six original \(\mathrm{X_2}\) molecules.
ⓓ. It is inconsistent because the final vessel contains more X atoms than initially, while its Y-atom count remains unchanged.
Correct Answer: It is inconsistent because the final vessel contains more X atoms than initially, while its Y-atom count remains unchanged.
Explanation: \(\textbf{Counting the original elemental inventories:}\)
Initially, six \(\mathrm{X_2}\) molecules contain
\[
N_{X,\mathrm{initial}}=6(2)=12
\]
X atoms.
The six \(\mathrm{Y_2}\) molecules contain
\[
N_{Y,\mathrm{initial}}=6(2)=12
\]
Y atoms.
\(\textbf{Checking the reported product particles:}\)
Eight \(\mathrm{X_2Y}\) molecules contain
\[
N_{X,\mathrm{product}}=8(2)=16
\]
X atoms and
\[
N_{Y,\mathrm{product}}=8(1)=8
\]
Y atoms.
The two remaining \(\mathrm{Y_2}\) molecules contribute
\[
N_{Y,\mathrm{remaining}}=2(2)=4
\]
additional Y atoms.
Therefore, the final counts are
\[
N_{X,\mathrm{final}}=16
\]
\[
N_{Y,\mathrm{final}}=8+4=12
\]
\(\textbf{Evaluating the conservation requirements:}\)
The Y-atom inventory is conserved.
However, the X-atom inventory increases from 12 to 16.
That increase cannot occur in a sealed vessel through the stated ordinary chemical reaction.
The decrease in total molecule count is not itself a contradiction because molecular counts need not be conserved.
The contradiction is specifically the creation of four additional X atoms.
The record would require an unreported X-containing source or an incorrect particle count.
The scientifically justified conclusion is that the reported final state violates conservation of X atoms.
335. Two pure oxides of an element X are analysed. Sample P contains 12.0 g of X and 8.0 g of oxygen. Sample Q contains 18.0 g of X and 18.0 g of oxygen. Both samples are free from impurities. Which ratio describes the oxygen masses that combine with the same mass of X in P and Q, respectively, and which law is directly illustrated?
ⓐ. \(2:3\); law of definite proportions
ⓑ. \(1:2\); law of multiple proportions
ⓒ. \(2:3\); law of multiple proportions
ⓓ. \(3:2\); law of conservation of mass
Correct Answer: \(2:3\); law of multiple proportions
Explanation: \(\textbf{Recognising the required comparison basis:}\)
The law of multiple proportions compares masses of one element combining with a fixed mass of another element in different compounds.
The original samples contain different masses of X.
Their oxygen masses must therefore be normalised to the same X mass before a meaningful comparison is made.
\(\textbf{Normalising Sample P:}\)
Sample P contains 8.0 g oxygen per 12.0 g X.
For a fixed 12.0 g mass of X,
\[
m_{O,P}=8.0\,\text{g}
\]
\(\textbf{Normalising Sample Q:}\)
Sample Q contains 18.0 g oxygen per 18.0 g X.
For 12.0 g X, its oxygen mass would be
\[
m_{O,Q}=18.0\left(\frac{12.0}{18.0}\right)
\]
\[
m_{O,Q}=12.0\,\text{g}
\]
\(\textbf{Comparing the oxygen masses:}\)
\[
m_{O,P}:m_{O,Q}=8.0:12.0
\]
\[
m_{O,P}:m_{O,Q}=2:3
\]
\(\textbf{Identifying the governing law:}\)
The two pure compounds contain the same pair of elements but in different fixed mass ratios.
When the mass of X is held constant, the masses of oxygen that combine with it are in the simple whole-number ratio \(2:3\).
This directly illustrates the law of multiple proportions.
The law of definite proportions instead concerns the constancy of composition within a particular pure compound.
Conservation of mass concerns the equality of total reactant and product masses during a chemical reaction.
Neither of those laws is the specific relationship being tested by the comparison of these two oxides.
\(\textbf{Final answer:}\)
\[
\boxed{m_{O,P}:m_{O,Q}=2:3}
\]
336. Equal volumes of two different pure gases P and Q are measured separately at the same temperature and pressure. Each gas contains only identical diatomic molecules. Gas P is then compressed isothermally to half its original volume without any gas escaping or undergoing reaction. Which statement is correct?
ⓐ. The compressed P contains twice as many molecules as the original P and therefore twice as many atoms as Q.
ⓑ. Compressed P has as many molecules as Q but twice its original molecular number density.
ⓒ. The compressed P contains half as many molecules as Q because its volume is half as large.
ⓓ. The compressed P has the same pressure as Q because their molecular amounts remain equal.
Correct Answer: Compressed P has as many molecules as Q but twice its original molecular number density.
Explanation: Initially, gases P and Q occupy equal volumes at the same temperature and pressure.
Avogadro's law therefore establishes that their initial numbers of molecules are equal.
Both gases are diatomic, so equal molecular numbers also correspond to equal total constituent-atom numbers.
Compression of P occurs without material entering or leaving.
Its molecular number consequently remains unchanged.
The compression also involves no chemical reaction, so its molecular identity and atomicity remain unchanged.
However, the available volume becomes half its original value.
Molecular number density is the number of molecules divided by the volume occupied.
Keeping the molecular number constant while halving the volume doubles this number density.
Thus, the compressed P still contains the same number of molecules as Q.
Option A incorrectly treats compression as molecule creation.
Option C applies an equal-temperature-and-pressure volume comparison even though the final pressures are no longer equal.
For an isothermal ideal-gas compression to half the volume, the pressure of P doubles.
Therefore, Option D is also incorrect.
The crucial distinction is between the conserved molecular inventory and the changed molecular number per unit volume.
337. A gas mixture contains two hypothetical gaseous elements, \(\mathrm{A_2}\) and \(\mathrm{B_2}\). They react completely to form only the gaseous compound \(\mathrm{AB_3}\). In a separate experiment, 2.0 L of \(\mathrm{A_2}\) produces 4.0 L of \(\mathrm{AB_3}\), all gas volumes being measured at the same temperature and pressure. What minimum volume of \(\mathrm{B_2}\) must be consumed, and how does the total gaseous volume change during the reaction?
ⓐ. 4.0 L of \(\mathrm{B_2}\); total gas volume remains unchanged
ⓑ. 6.0 L of \(\mathrm{B_2}\); total gas volume decreases from 8.0 L to 4.0 L
ⓒ. 6.0 L of \(\mathrm{B_2}\); total gas volume increases from 4.0 L to 8.0 L
ⓓ. 3.0 L of \(\mathrm{B_2}\); total gas volume decreases from 5.0 L to 4.0 L
Correct Answer: 6.0 L of \(\mathrm{B_2}\); total gas volume decreases from 8.0 L to 4.0 L
Explanation: \(\textbf{Balancing the molecular formulae:}\)
The product molecule \(\mathrm{AB_3}\) contains one A atom and three B atoms.
Two product molecules contain two A atoms and six B atoms.
These atoms can be supplied by one \(\mathrm{A_2}\) molecule and three \(\mathrm{B_2}\) molecules.
The balanced equation is
\[
\mathrm{A_2(g)+3B_2(g)\rightarrow2AB_3(g)}
\]
\(\textbf{Relating gaseous volumes to coefficients:}\)
All stated volumes are measured at the same temperature and pressure.
The gas-volume ratio therefore follows the balanced molecular coefficient ratio.
\[
V_{\mathrm{A_2}}:V_{\mathrm{B_2}}:V_{\mathrm{AB_3}}=1:3:2
\]
\(\textbf{Determining the required B gas:}\)
The specified A-gas volume is 2.0 L.
Therefore,
\[
V_{\mathrm{B_2,consumed}}=2.0\left(\frac31\right)
\]
\[
V_{\mathrm{B_2,consumed}}=6.0\,\text{L}
\]
\(\textbf{Checking the product volume:}\)
\[
V_{\mathrm{AB_3}}=2.0\left(\frac21\right)
\]
\[
V_{\mathrm{AB_3}}=4.0\,\text{L}
\]
This agrees with the observed product volume.
\(\textbf{Comparing total gaseous volumes:}\)
The combined reacting-gas volume is
\[
V_{\mathrm{reactants}}=2.0+6.0
\]
\[
V_{\mathrm{reactants}}=8.0\,\text{L}
\]
The sole gaseous product occupies 4.0 L under the same reference conditions.
Thus,
\[
\Delta V=4.0-8.0
\]
\[
\Delta V=-4.0\,\text{L}
\]
\(\textbf{Physical interpretation:}\)
The volume decreases because four gaseous reactant molecules form two gaseous product molecules per reaction unit.
This does not imply that half the atoms disappear.
The product molecules contain all the A and B atoms originally supplied by the reacting molecules.
The volume comparison depends on equal temperature and pressure; it is not a claim about volumes during a reaction under unspecified changing conditions.
\(\textbf{Final answer:}\)
\[
\boxed{V_{\mathrm{B_2}}=6.0\,\text{L},\quad V_{\mathrm{reactants}}=8.0\,\text{L},\quad V_{\mathrm{product}}=4.0\,\text{L}}
\]
338. The carbon-12 atomic mass standard defines one unified atomic mass unit as one-twelfth of the mass of a carbon-12 atom. A sample contains \(0.25\,\mathrm{mol}\) of hypothetical atoms X, each having mass exactly \(30\,\mathrm{u}\). Consider the following statements.
Statement I: The mass of one X atom is \(2.5\) times the mass of one carbon-12 atom.
Statement II: The mass of the sample is 7.5 g.
Statement III: The atomic mass of X is numerically 30 u, whereas the molar mass of X atoms is numerically \(30\,\mathrm{g\,mol^{-1}}\).
Statement IV: One mole of X atoms contains thirty times as many atoms as one mole of carbon-12 atoms.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and IV only
ⓒ. I, II and III only
ⓓ. I, III and IV only
Correct Answer: I, II and III only
Explanation: Statement I is correct because the mass of one carbon-12 atom is exactly 12 u by the defining scale.
The mass ratio is therefore \(30/12=2.5\).
Statement II is correct because one mole of X atoms has mass 30 g.
A quarter mole consequently has mass \(0.25(30)=7.5\) g.
Statement III is correct when the units and entities are stated precisely.
Atomic mass refers to the mass of an individual atom and is conveniently expressed in u.
Molar mass refers to mass per mole of the specified entities and is expressed in \(\mathrm{g\,mol^{-1}}\) or another mass-per-amount unit.
The numerical equality between atomic mass in u and molar mass in \(\mathrm{g\,mol^{-1}}\) arises from the adopted atomic-mass and mole scales.
It does not mean that one atom has a mass of 30 g.
Statement IV is incorrect because one mole of any specified elementary entities contains the same Avogadro number of entities.
A mole of X atoms and a mole of carbon-12 atoms therefore contain equal numbers of atoms.
The mass of each X atom is greater, but its greater mass does not alter the definition of the mole.
The distinction between mass per atom, mass per mole and entity count is essential.
Only Statements I, II and III are correct.
339. A pure ionic compound has the formula \(\mathrm{M_3(PO_4)_2}\), where M is an unknown divalent metal. Its experimentally determined formula molar mass is \(262\,\mathrm{g\,mol^{-1}}\). The same metal forms an oxide having formula MO. What is the mass of \(0.20\,\mathrm{mol}\) of the oxide, and how many moles of oxygen atoms does this oxide sample contain? (Atomic masses: P = 31, O = 16)
ⓐ. 8.0 g oxide and \(0.20\,\mathrm{mol}\) oxygen atoms
ⓑ. 14.4 g oxide and \(0.40\,\mathrm{mol}\) oxygen atoms
ⓒ. 12.8 g oxide and \(0.40\,\mathrm{mol}\) oxygen atoms
ⓓ. 14.4 g oxide and \(0.20\,\mathrm{mol}\) oxygen atoms
Correct Answer: 8.0 g oxide and \(0.20\,\mathrm{mol}\) oxygen atoms
Explanation: \(\textbf{Isolating the phosphate contribution:}\)
The formula \(\mathrm{M_3(PO_4)_2}\) contains three M atoms and two phosphate groups.
One phosphate group has formula mass
\[
m_{\mathrm{PO_4}}=31+4(16)
\]
\[
m_{\mathrm{PO_4}}=95\,\mathrm{u}
\]
Two phosphate groups contribute
\[
m_{2\mathrm{PO_4}}=2(95)
\]
\[
m_{2\mathrm{PO_4}}=190\,\mathrm{u}
\]
\(\textbf{Recovering the unknown atomic mass:}\)
Let the average atomic mass of M be \(a\,\mathrm{u}\).
The formula-mass relation is
\[
3a+190=262
\]
\[
3a=72
\]
\[
a=24
\]
Therefore, the metal has atomic mass \(24\,\mathrm{u}\).
\(\textbf{Transferring the result to the oxide:}\)
The metal oxide formula is MO.
Its formula molar mass is
\[
M_{\mathrm{MO}}=24+16
\]
\[
M_{\mathrm{MO}}=40\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Determining the oxide sample mass:}\)
The specified oxide amount is \(0.20\,\mathrm{mol}\).
\[
m_{\mathrm{MO}}=nM
\]
\[
m_{\mathrm{MO}}=0.20(40)
\]
\[
m_{\mathrm{MO}}=8.0\,\text{g}
\]
\(\textbf{Counting constituent oxygen atoms:}\)
Every MO formula unit contains exactly one oxygen atom.
Therefore,
\[
n_O=1(0.20)
\]
\[
n_O=0.20\,\mathrm{mol}
\]
\(\textbf{Checking the supplied options:}\)
The derived oxide mass is 8.0 g.
The oxide sample contains 8.0 g of MO and 0.20 mol of oxygen atoms.
Both results follow from the independently determined metal atomic mass and the oxide formula.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{MO}}=8.0\,\text{g},\quad n_O=0.20\,\mathrm{mol}}
\]
340. Two samples of a hypothetical element X contain only isotopes of masses 20 u and 22 u. Sample P has 25% heavier-isotope atoms, while Sample Q has 75% heavier-isotope atoms. A mixture is made by combining 1.00 mol of atoms from P with 3.00 mol of atoms from Q. What is the final average atomic mass, and what percentage of the mixture's total mass is contributed by the heavier isotope?
ⓐ. \(21.25\,\mathrm{u}\) and approximately \(64.71\%\)
ⓑ. \(21.25\,\mathrm{u}\) and approximately \(66.47\%\)
ⓒ. \(21.50\,\mathrm{u}\) and approximately \(66.47\%\)
ⓓ. \(21.50\,\mathrm{u}\) and approximately \(64.71\%\)
Correct Answer: \(21.25\,\mathrm{u}\) and approximately \(64.71\%\)
Explanation: \(\textbf{Counting the heavier-isotope atoms contributed by P:}\)
Sample P supplies 1.00 mol of atoms, of which 25% are the heavier isotope.
\[
n_{22,P}=1.00(0.25)
\]
\[
n_{22,P}=0.25\,\mathrm{mol}
\]
\(\textbf{Counting the heavier-isotope atoms contributed by Q:}\)
Sample Q supplies 3.00 mol of atoms, of which 75% are heavier.
\[
n_{22,Q}=3.00(0.75)
\]
\[
n_{22,Q}=2.25\,\mathrm{mol}
\]
The total heavier-isotope amount is
\[
n_{22}=0.25+2.25
\]
\[
n_{22}=2.50\,\mathrm{mol}
\]
\(\textbf{Recovering the lighter-isotope amount:}\)
The total atomic amount is
\[
n_{\mathrm{total}}=1.00+3.00=4.00\,\mathrm{mol}
\]
Therefore,
\[
n_{20}=4.00-2.50
\]
\[
n_{20}=1.50\,\mathrm{mol}
\]
\(\textbf{Calculating the final average atomic mass:}\)
\[
\overline{m}_X=\frac{20n_{20}+22n_{22}}{n_{\mathrm{total}}}
\]
Substituting,
\[
\overline{m}_X=\frac{20(1.50)+22(2.50)}{4.00}
\]
\[
\overline{m}_X=\frac{30.0+55.0}{4.00}
\]
\[
\overline{m}_X=21.25\,\mathrm{u}
\]
\(\textbf{Converting atom fraction into mass fraction:}\)
The heavier isotope contributes 55.0 g on the selected mole basis.
The total isotope mass is 85.0 g.
Thus,
\[
w_{22}=\frac{55.0}{85.0}
\]
\[
w_{22}\approx0.6471
\]
\[
\%m_{22}\approx64.71\%
\]
\(\textbf{Evaluating the options:}\)
The calculated pair is \(21.25\,\mathrm{u}\) and approximately \(64.71\%\), corresponding to Option A.
The heavier-isotope atom percentage is \(2.50/4.00=62.5\%\), which differs from its mass percentage because heavier-isotope atoms have greater individual masses.
Equal contributions of atom amount and equal contributions of sample mass must not be confused.
The weighted atomic mass and the heavier-isotope mass percentage are therefore consistent with the independently counted isotope amounts.
\(\textbf{Final answer:}\)
\[
\boxed{\overline{m}_X=21.25\,\mathrm{u},\quad\%m_{22}\approx64.71\%}
\]
341. A pure sample of a hypothetical molecular element \(\mathrm{X_3}\) contains \(0.40\,\mathrm{mol}\) of molecules. After a physical separation, one-quarter of the molecules are removed. No dissociation or chemical reaction occurs. The remaining sample weighs 9.0 g. What is the atomic mass of X, and how many moles of X atoms were removed?
ⓐ. \(30\,\mathrm{u}\) and \(0.30\,\mathrm{mol}\)
ⓑ. \(30\,\mathrm{u}\) and \(0.10\,\mathrm{mol}\)
ⓒ. \(10\,\mathrm{u}\) and \(0.10\,\mathrm{mol}\)
ⓓ. \(10\,\mathrm{u}\) and \(0.30\,\mathrm{mol}\)
Correct Answer: \(10\,\mathrm{u}\) and \(0.30\,\mathrm{mol}\)
Explanation: \(\textbf{Separating the removed molecular amount:}\)
The initial molecular amount is
\[
n_{\mathrm{X_3,initial}}=0.40\,\mathrm{mol}
\]
One-quarter of the molecules are removed.
\[
n_{\mathrm{X_3,removed}}=\frac14(0.40)
\]
\[
n_{\mathrm{X_3,removed}}=0.10\,\mathrm{mol}
\]
\(\textbf{Recovering the remaining molecules:}\)
\[
n_{\mathrm{X_3,remaining}}=0.40-0.10
\]
\[
n_{\mathrm{X_3,remaining}}=0.30\,\mathrm{mol}
\]
\(\textbf{Determining the molecular molar mass:}\)
The remaining \(0.30\,\mathrm{mol}\) sample weighs 9.0 g.
\[
M_{\mathrm{X_3}}=\frac{m}{n}
\]
\[
M_{\mathrm{X_3}}=\frac{9.0}{0.30}
\]
\[
M_{\mathrm{X_3}}=30\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Recovering the atomic mass:}\)
Each \(\mathrm{X_3}\) molecule contains three X atoms.
Therefore, its molecular mass is three times the atomic mass of X.
\[
m_X=\frac{30}{3}
\]
\[
m_X=10\,\mathrm{u}
\]
\(\textbf{Counting atoms removed:}\)
The removed molecular amount is \(0.10\,\mathrm{mol}\).
Every removed molecule contains three X atoms.
Thus,
\[
n_{\mathrm{X,atoms\ removed}}=3(0.10)
\]
\[
n_{\mathrm{X,atoms\ removed}}=0.30\,\mathrm{mol}
\]
\(\textbf{Independent mass check:}\)
The removed molecular sample weighs
\[
m_{\mathrm{removed}}=0.10(30)
\]
\[
m_{\mathrm{removed}}=3.0\,\text{g}
\]
The original mass is therefore \(9.0+3.0=12.0\) g.
This also follows from \(0.40(30)=12.0\) g.
The physical separation reduces the number of molecular entities but does not change the atomic mass or the molecular formula.
The amount of atoms removed is three times the amount of molecules removed.
\(\textbf{Final answer:}\)
\[
\boxed{m_X=10\,\mathrm{u},\quad n_{\mathrm{X,atoms\ removed}}=0.30\,\mathrm{mol}}
\]
342. A laboratory obtains two samples of a binary compound \(\mathrm{AB_2}\). The A atoms have the same isotopic mass in both samples. Each B atom in Sample Q is exactly 1 u heavier than each B atom in Sample P. A \(0.50\,\mathrm{mol}\) sample of Q weighs 1.0 g more than a \(0.50\,\mathrm{mol}\) sample of P. Which inference is correct?
ⓐ. The data are inconsistent because changing an isotope cannot change sample mass.
ⓑ. The observed 1.0 g increase proves that each B atom became 2 u heavier.
ⓒ. The data are consistent only if the formula is \(\mathrm{A_2B}\).
ⓓ. The extra 1.0 g follows from two B atoms per formula unit, each 1 u heavier in Q.
Correct Answer: The extra 1.0 g follows from two B atoms per formula unit, each 1 u heavier in Q.
Explanation: The compound formula is \(\mathrm{AB_2}\).
Each formula unit contains one A atom and two B atoms.
The A isotopic mass is unchanged between samples.
Every B atom in Q is 1 u heavier than its counterpart in P.
Therefore, the average formula mass of Q exceeds that of P by \(2(1)=2\,\mathrm{u}\).
The corresponding difference in molar mass is \(2\,\mathrm{g\,mol^{-1}}\).
The two samples have equal formula-unit amounts of \(0.50\,\mathrm{mol}\).
The expected mass difference is therefore
\[
\Delta m=n\Delta M
\]
\[
\Delta m=0.50(2)
\]
\[
\Delta m=1.0\,\text{g}
\]
This matches the observed difference.
Option A is incorrect because isotopic masses do affect the mass of a given number of formula units.
Option C changes the formula without justification.
The supplied formula already predicts the measurement exactly.
Option B incorrectly assigns the entire 2 u formula-mass increase to each individual B atom.
There are two B atoms per formula unit, so their individual changes add together.
The observation illustrates how fixed chemical stoichiometry controls the effect of isotope substitution on formula mass.
It does not require a change in elemental identity or formula subscripts.
343. A \(0.20\,\mathrm{mol}\) sample of pure molecular oxygen is mixed with a \(0.10\,\mathrm{mol}\) sample of pure ozone. The molecules do not react. Which pair correctly gives the total amount of oxygen atoms and the average molar mass of the molecular mixture? (Atomic mass of O = 16)
ⓐ. \(0.50\,\mathrm{mol}\) oxygen atoms and \(36\,\mathrm{g\,mol^{-1}}\)
ⓑ. \(0.70\,\mathrm{mol}\) oxygen atoms and \(36\,\mathrm{g\,mol^{-1}}\)
ⓒ. \(0.70\,\mathrm{mol}\) oxygen atoms and \(37.33\,\mathrm{g\,mol^{-1}}\)
ⓓ. \(0.50\,\mathrm{mol}\) oxygen atoms and \(37.33\,\mathrm{g\,mol^{-1}}\)
Correct Answer: \(0.70\,\mathrm{mol}\) oxygen atoms and \(37.33\,\mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Counting atoms from each molecular form:}\)
Oxygen gas contains diatomic molecules \(\mathrm{O_2}\).
The \(0.20\,\mathrm{mol}\) molecular sample therefore contains
\[
n_{O,\mathrm{O_2}}=2(0.20)
\]
\[
n_{O,\mathrm{O_2}}=0.40\,\mathrm{mol}
\]
Ozone contains triatomic molecules \(\mathrm{O_3}\).
The \(0.10\,\mathrm{mol}\) ozone sample contains
\[
n_{O,\mathrm{O_3}}=3(0.10)
\]
\[
n_{O,\mathrm{O_3}}=0.30\,\mathrm{mol}
\]
Therefore,
\[
n_{O,\mathrm{total}}=0.40+0.30
\]
\[
n_{O,\mathrm{total}}=0.70\,\mathrm{mol}
\]
\(\textbf{Determining the total molecular amount:}\)
\[
n_{\mathrm{molecules,total}}=0.20+0.10
\]
\[
n_{\mathrm{molecules,total}}=0.30\,\mathrm{mol}
\]
\(\textbf{Calculating the mixture mass:}\)
The molar masses of the two molecular forms are
\[
M_{\mathrm{O_2}}=32\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{O_3}}=48\,\mathrm{g\,mol^{-1}}
\]
The total mass is
\[
m_{\mathrm{total}}=0.20(32)+0.10(48)
\]
\[
m_{\mathrm{total}}=6.4+4.8
\]
\[
m_{\mathrm{total}}=11.2\,\text{g}
\]
\(\textbf{Finding the average molar mass:}\)
\[
\overline{M}=\frac{m_{\mathrm{total}}}{n_{\mathrm{molecules,total}}}
\]
\[
\overline{M}=\frac{11.2}{0.30}
\]
\[
\overline{M}\approx37.33\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Independent composition check:}\)
The oxygen-atom amount corresponds to a total oxygen mass of
\[
m_O=0.70(16)=11.2\,\text{g}
\]
This agrees with the molecular mixture mass because both species contain oxygen only.
The number of oxygen atoms per molecule differs between the two species, so total molecular amount and total atomic amount must be counted separately.
The average molar mass is calculated per mole of molecules, not per mole of constituent atoms.
\(\textbf{Final answer:}\)
\[
\boxed{n_{O,\mathrm{total}}=0.70\,\mathrm{mol},\quad\overline{M}=37.33\,\mathrm{g\,mol^{-1}}}
\]
344. An ideal gaseous mixture contains only \(\mathrm{N_2}\) and \(\mathrm{NO}\). The total amount of gas molecules is \(0.50\,\mathrm{mol}\). The mixture contains \(0.20\,\mathrm{mol}\) of oxygen atoms. What are the nitrogen gas mole fraction and the average molar mass of the mixture? (Atomic masses: N = 14, O = 16)
ⓐ. \(0.40\) and \(29.2\,\mathrm{g\,mol^{-1}}\)
ⓑ. \(0.60\) and \(28.8\,\mathrm{g\,mol^{-1}}\)
ⓒ. \(0.60\) and \(29.2\,\mathrm{g\,mol^{-1}}\)
ⓓ. \(0.40\) and \(28.8\,\mathrm{g\,mol^{-1}}\)
Correct Answer: \(0.60\) and \(28.8\,\mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Using the distinctive oxygen inventory:}\)
Nitrogen gas contains no oxygen atoms.
Every nitric oxide molecule contains exactly one oxygen atom.
Therefore, the measured oxygen-atom amount directly establishes the amount of NO molecules.
\[
n_{\mathrm{NO}}=n_{O,\mathrm{atoms}}
\]
\[
n_{\mathrm{NO}}=0.20\,\mathrm{mol}
\]
\(\textbf{Recovering nitrogen gas amount:}\)
The total molecular amount is \(0.50\,\mathrm{mol}\).
\[
n_{\mathrm{N_2}}=0.50-0.20
\]
\[
n_{\mathrm{N_2}}=0.30\,\mathrm{mol}
\]
\(\textbf{Calculating the nitrogen gas mole fraction:}\)
\[
X_{\mathrm{N_2}}=\frac{n_{\mathrm{N_2}}}{n_{\mathrm{total}}}
\]
\[
X_{\mathrm{N_2}}=\frac{0.30}{0.50}
\]
\[
X_{\mathrm{N_2}}=0.60
\]
\(\textbf{Determining the component molar masses:}\)
Nitrogen gas has molar mass
\[
M_{\mathrm{N_2}}=2(14)
\]
\[
M_{\mathrm{N_2}}=28\,\mathrm{g\,mol^{-1}}
\]
Nitrogen monoxide has molar mass
\[
M_{\mathrm{NO}}=14+16
\]
\[
M_{\mathrm{NO}}=30\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Calculating the total mass:}\)
\[
m_{\mathrm{total}}=0.30(28)+0.20(30)
\]
\[
m_{\mathrm{total}}=8.4+6.0
\]
\[
m_{\mathrm{total}}=14.4\,\text{g}
\]
\(\textbf{Finding the average molar mass:}\)
\[
\overline{M}=\frac{14.4}{0.50}
\]
\[
\overline{M}=28.8\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Independent atom-count check:}\)
The nitrogen gas contributes \(2(0.30)=0.60\,\mathrm{mol}\) nitrogen atoms.
Nitrogen monoxide contributes another \(0.20\,\mathrm{mol}\) nitrogen atoms.
The complete mixture therefore contains \(0.80\,\mathrm{mol}\) nitrogen atoms and \(0.20\,\mathrm{mol}\) oxygen atoms.
Both species are diatomic, so the total constituent-atom amount is \(2(0.50)=1.00\,\mathrm{mol}\), consistent with the sum.
The oxygen-atom measurement distinguishes the two molecular species despite their similar molar masses.
\(\textbf{Final answer:}\)
\[
\boxed{X_{\mathrm{N_2}}=0.60,\quad\overline{M}=28.8\,\mathrm{g\,mol^{-1}}}
\]
345. A gas mixture contains \(0.10\,\mathrm{mol}\) of carbon dioxide, \(0.20\,\mathrm{mol}\) of nitrogen gas and \(0.10\,\mathrm{mol}\) of water vapour. Water vapour is subsequently removed completely by condensation, without affecting the amounts of the other gases. Which statement correctly compares the average molar mass before and after drying? (Atomic masses: C = 12, N = 14, H = 1, O = 16)
ⓐ. The average molar mass decreases because the total gas mass decreases.
ⓑ. The average molar mass remains unchanged because no chemical reaction occurs.
ⓒ. The average molar mass increases from \(29.5\) to approximately \(33.33\,\mathrm{g\,mol^{-1}}\).
ⓓ. The average molar mass increases from \(29.5\) to approximately \(34.0\,\mathrm{g\,mol^{-1}}\).
Correct Answer: The average molar mass increases from \(29.5\) to approximately \(33.33\,\mathrm{g\,mol^{-1}}\).
Explanation: \(\textbf{Calculating the initial molecular amount:}\)
The original mixture contains carbon dioxide, nitrogen and water vapour.
\[
n_{\mathrm{initial}}=0.10+0.20+0.10
\]
\[
n_{\mathrm{initial}}=0.40\,\mathrm{mol}
\]
\(\textbf{Calculating the original component masses:}\)
The relevant molar masses are
\[
M_{\mathrm{CO_2}}=44\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{N_2}}=28\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{H_2O}}=18\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
m_{\mathrm{initial}}=0.10(44)+0.20(28)+0.10(18)
\]
\[
m_{\mathrm{initial}}=4.4+5.6+1.8
\]
\[
m_{\mathrm{initial}}=11.8\,\text{g}
\]
\(\textbf{Finding the initial average molar mass:}\)
\[
\overline{M}_{\mathrm{initial}}=\frac{11.8}{0.40}
\]
\[
\overline{M}_{\mathrm{initial}}=29.5\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Applying selective water removal:}\)
After condensation and removal, only carbon dioxide and nitrogen remain in the gas mixture.
Their amounts are unchanged.
\[
n_{\mathrm{dry}}=0.10+0.20
\]
\[
n_{\mathrm{dry}}=0.30\,\mathrm{mol}
\]
The dry gas mass is
\[
m_{\mathrm{dry}}=4.4+5.6
\]
\[
m_{\mathrm{dry}}=10.0\,\text{g}
\]
\(\textbf{Calculating the new average molar mass:}\)
\[
\overline{M}_{\mathrm{dry}}=\frac{10.0}{0.30}
\]
\[
\overline{M}_{\mathrm{dry}}\approx33.33\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Explaining the direction of change:}\)
Water vapour has a lower molar mass than either of the remaining gases.
Removing water therefore removes a relatively light molecular component.
Although both the total gas mass and the total molecular amount decrease, their ratio increases.
A decrease in total mass alone does not determine the direction of change in average molar mass.
The average molar mass is a composition-dependent property of the remaining molecular mixture.
The physical separation changes this composition even though no chemical reaction occurs.
\(\textbf{Final answer:}\)
\[
\boxed{\overline{M}_{\mathrm{initial}}=29.5\,\mathrm{g\,mol^{-1}},\quad\overline{M}_{\mathrm{dry}}\approx33.33\,\mathrm{g\,mol^{-1}}}
\]
346. A laboratory receives three colourless liquid samples P, Q and R. Each is reported to contain only hydrogen and oxygen.
| Sample | Total mass | Hydrogen mass | Oxygen mass |
| P | 18.0 g | 2.0 g | 16.0 g |
| Q | 36.0 g | 4.0 g | 32.0 g |
| R | 27.0 g | 4.0 g | 23.0 g |
P and Q are independently confirmed to be pure samples of the same compound. R is a homogeneous liquid, but its purity has not been established. Which conclusion is justified by the data?
ⓐ. R must be the same pure compound because it contains the same two elements.
ⓑ. R must be a heterogeneous mixture because its elemental mass ratio differs from that of P.
ⓒ. R cannot be the same pure compound as P and Q; its homogeneous appearance does not establish purity.
ⓓ. The law of conservation of mass requires all three samples to have the same hydrogen mass percentage.
Correct Answer: R cannot be the same pure compound as P and Q; its homogeneous appearance does not establish purity.
Explanation: \(\textbf{Establishing the composition of the confirmed compound:}\)
Samples P and Q are independently identified as the same pure compound.
For P, the hydrogen-to-oxygen mass ratio is
\[
m_H:m_O=2.0:16.0
\]
\[
m_H:m_O=1:8
\]
For Q,
\[
m_H:m_O=4.0:32.0
\]
\[
m_H:m_O=1:8
\]
Both samples satisfy the same fixed elemental mass ratio.
\(\textbf{Testing the unverified sample:}\)
For R,
\[
m_H:m_O=4.0:23.0
\]
This differs from the \(1:8\) ratio established for the confirmed pure compound.
If R were 27.0 g of that same pure compound, its predicted hydrogen mass would be
\[
m_H=27.0\left(\frac{1}{1+8}\right)
\]
\[
m_H=3.0\,\text{g}
\]
Instead, the measured hydrogen mass is 4.0 g.
Therefore, R cannot be a pure sample of the same compound represented by P and Q.
\(\textbf{Distinguishing composition from physical appearance:}\)
A homogeneous sample has uniform observable composition at the scale examined.
Homogeneity alone does not prove that only one chemical substance is present.
A solution containing more than one substance may also be homogeneous.
The data do not uniquely identify the substances present in R or prove that it is heterogeneous.
They establish only that R is compositionally inconsistent with the confirmed pure compound.
The relevant principle is the law of definite proportions, which requires a given pure compound to have a fixed elemental mass composition under the stated ordinary isotopic conditions.
The law of conservation of mass does not require different samples to have identical compositions.
Thus, Option C is the only justified conclusion.
347. Three pure compounds P, Q and R contain only elements X and oxygen. Their independently measured elemental masses are given below.
| Compound | Mass of X | Mass of oxygen |
| P | 9.0 g | 6.0 g |
| Q | 15.0 g | 15.0 g |
| R | 12.0 g | 16.0 g |
Which is the ratio of oxygen masses combining with a fixed mass of X in P, Q and R, respectively, and which additional conclusion follows?
ⓐ. \(6:15:16\); the law of multiple proportions is established directly without normalisation.
ⓑ. \(2:3:4\); the different compounds illustrate the law of multiple proportions.
ⓒ. \(3:2:4\); all three compounds necessarily have the same empirical formula.
ⓓ. \(2:3:4\); all three compounds necessarily have the same oxygen mass percentage.
Correct Answer: \(2:3:4\); the different compounds illustrate the law of multiple proportions.
Explanation: \(\textbf{Choosing a common mass basis:}\)
The law of multiple proportions compares masses of one element combining with the same mass of another element.
The three original samples contain different masses of X.
Consequently, their oxygen masses cannot be compared directly.
A convenient common basis is 180 g of X, which is divisible by the X masses in all three samples.
\(\textbf{Normalising Compound P:}\)
For P, 9.0 g X combines with 6.0 g oxygen.
For 180 g X,
\[
m_{O,P}=6.0\left(\frac{180}{9.0}\right)
\]
\[
m_{O,P}=120\,\text{g}
\]
\(\textbf{Normalising Compound Q:}\)
For Q, 15.0 g X combines with 15.0 g oxygen.
\[
m_{O,Q}=15.0\left(\frac{180}{15.0}\right)
\]
\[
m_{O,Q}=180\,\text{g}
\]
\(\textbf{Normalising Compound R:}\)
For R, 12.0 g X combines with 16.0 g oxygen.
\[
m_{O,R}=16.0\left(\frac{180}{12.0}\right)
\]
\[
m_{O,R}=240\,\text{g}
\]
\(\textbf{Finding the simplest whole-number relationship:}\)
\[
m_{O,P}:m_{O,Q}:m_{O,R}=120:180:240
\]
Dividing throughout by 60,
\[
m_{O,P}:m_{O,Q}:m_{O,R}=2:3:4
\]
\(\textbf{Interpreting the chemical law:}\)
The compounds contain the same two elements but differ in their combining mass ratios.
With the mass of X fixed, the oxygen masses are in a simple whole-number ratio.
This is the relationship described by the law of multiple proportions.
The law does not require the original samples to have equal masses.
It also does not imply that the oxygen mass percentages of the three compounds are identical.
Indeed, different oxygen-to-X ratios give different oxygen mass fractions.
The elemental atomic mass of X would be needed for further numerical interpretation of individual atomic ratios, and the presented mass comparison alone is not a direct determination of molecular formulae.
\(\textbf{Final answer:}\)
\[
\boxed{m_{O,P}:m_{O,Q}:m_{O,R}=2:3:4}
\]
348. Two experimental reports investigate the same pure gaseous compound \(\mathrm{AB}\), where A and B are different hypothetical elements.
Report I finds that 4.0 L of gaseous \(\mathrm{A_2}\) reacts with 4.0 L of gaseous \(\mathrm{B_2}\) to produce 8.0 L of gaseous AB. All three volumes are measured at the same temperature and pressure.
Report II finds that 4.0 g of A combines with 6.0 g of B to form 10.0 g of AB. The measurements are exact.
Which conclusion correctly identifies the independent principles demonstrated by these reports?
ⓐ. Report I demonstrates conservation of mass, while Report II uniquely determines the molecular formula of AB.
ⓑ. Report I illustrates gaseous combining volumes; Report II is consistent with mass conservation and fixed composition.
ⓒ. Report I demonstrates the law of multiple proportions, while Report II demonstrates Avogadro's law.
ⓓ. Both reports demonstrate only the law of definite proportions because they concern the same compound.
Correct Answer: Report I illustrates gaseous combining volumes; Report II is consistent with mass conservation and fixed composition.
Explanation: Report I concerns volumes of reacting gases and their gaseous product.
The volumes are explicitly measured at the same temperature and pressure.
Their ratio is
\[
V_{\mathrm{A_2}}:V_{\mathrm{B_2}}:V_{\mathrm{AB}}=4:4:8
\]
\[
V_{\mathrm{A_2}}:V_{\mathrm{B_2}}:V_{\mathrm{AB}}=1:1:2
\]
This simple whole-number relationship is consistent with Gay-Lussac's law of gaseous volumes.
It also agrees with the balanced molecular equation
\[
\mathrm{A_2(g)+B_2(g)\rightarrow2AB(g)}
\]
Avogadro's law explains why the corresponding gaseous volume ratio can be interpreted as a molecular-number ratio under the stated conditions.
Report II concerns masses rather than gaseous volumes.
The mass of A and the mass of B sum to the reported compound mass:
\[
4.0+6.0=10.0\,\text{g}
\]
Therefore, the report is consistent with conservation of mass.
It also specifies a particular A-to-B combining mass ratio of \(2:3\), as expected for a pure compound with fixed composition.
A single composition measurement is consistent with definite proportions, although demonstrating its constancy independently would require comparison with another pure sample.
The law of multiple proportions requires comparison of different compounds formed from the same two elements; no such comparison is provided.
The two reports therefore concern distinct but compatible chemical principles.
Option B correctly identifies their respective evidential roles.
349. A reaction between a metal and oxygen is carried out in an open crucible. The empty crucible initially weighs 25.0 g. After adding 4.8 g of pure magnesium, the crucible and contents are heated until all magnesium forms MgO. The cooled crucible and product together weigh 33.0 g. No solid is lost. Which pair correctly gives the mass of oxygen incorporated and the reason this observation does not violate conservation of mass?
ⓐ. 8.0 g; the mass of the empty crucible must be counted as reacting magnesium.
ⓑ. 8.0 g; the additional mass was created during oxidation.
ⓒ. 3.2 g; magnesium atoms gained mass without incorporating any other atoms.
ⓓ. 3.2 g; oxygen from the surroundings became part of the solid product.
Correct Answer: 3.2 g; oxygen from the surroundings became part of the solid product.
Explanation: \(\textbf{Removing the mass of the container:}\)
The final measured mass includes the unchanged crucible.
The product mass is
\[
m_{\mathrm{MgO}}=33.0-25.0
\]
\[
m_{\mathrm{MgO}}=8.0\,\text{g}
\]
\(\textbf{Determining the mass introduced from the atmosphere:}\)
The original magnesium weighed 4.8 g.
No solid was lost, and all magnesium was converted into magnesium oxide.
Therefore, the increase in solid mass is due to oxygen incorporated from the surrounding atmosphere.
\[
m_O=m_{\mathrm{MgO}}-m_{\mathrm{Mg}}
\]
\[
m_O=8.0-4.8
\]
\[
m_O=3.2\,\text{g}
\]
\(\textbf{Checking the fixed oxide composition:}\)
The molar mass of MgO is
\[
M_{\mathrm{MgO}}=24+16
\]
\[
M_{\mathrm{MgO}}=40\,\mathrm{g\,mol^{-1}}
\]
Its magnesium mass fraction is
\[
w_{\mathrm{Mg}}=\frac{24}{40}=0.60
\]
For 8.0 g MgO, the predicted magnesium mass is
\[
m_{\mathrm{Mg}}=8.0(0.60)=4.8\,\text{g}
\]
The predicted oxygen mass is
\[
m_O=8.0(0.40)=3.2\,\text{g}
\]
Both agree with the measurements.
\(\textbf{Interpreting the experimental boundary:}\)
The crucible is open, so oxygen can enter from the environment.
The initial crucible-plus-magnesium mass is not the complete mass of the reacting materials.
Conservation of mass requires that the atmospheric oxygen consumed also be included among the reactants.
The complete material balance is
\[
4.8\,\text{g Mg}+3.2\,\text{g oxygen}=8.0\,\text{g MgO}
\]
The observed gain in the crucible's contents is therefore compatible with conservation of mass.
It does not mean that mass was created or that the mass of an individual magnesium atom increased during reaction.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{oxygen\ incorporated}}=3.2\,\text{g}}
\]
350. A sample of pure compound X contains elements A and B in the fixed mass ratio \(A:B=3:5\). Another laboratory provides two samples, P and Q, each containing only compounds of A and B. Their compositions are:
P: 6.0 g A and 10.0 g B.
Q: 6.0 g A and 12.0 g B.
Which statement is necessarily correct?
ⓐ. Both P and Q are pure X because they contain the same mass of A.
ⓑ. P has a composition compatible with pure X, whereas Q cannot be pure X.
ⓒ. Q must be a mixture of X and elemental B.
ⓓ. Q violates the law of conservation of mass because it contains more B than P.
Correct Answer: P has a composition compatible with pure X, whereas Q cannot be pure X.
Explanation: The given pure compound X has a fixed A-to-B mass ratio of \(3:5\).
For every 6.0 g of A in pure X, the required mass of B is
\[
m_B=6.0\left(\frac53\right)
\]
\[
m_B=10.0\,\text{g}
\]
Sample P contains precisely this combination.
Its observed elemental composition is therefore compatible with pure X.
Compatibility does not by itself prove purity, because a suitable mixture could potentially exhibit the same overall elemental ratio.
Sample Q contains 6.0 g of A and 12.0 g of B.
Its mass ratio is
\[
A:B=6.0:12.0=1:2
\]
This differs from \(3:5\).
Consequently, Q cannot consist entirely of the same pure compound X under the stated fixed-composition conditions.
The data do not identify the specific compounds present in Q or their individual amounts.
Therefore, it is not justified to assert that Q must contain elemental B as a separate constituent.
Different pure compounds of A and B, or suitable mixtures, may have different overall elemental ratios.
Conservation of mass does not require two independently prepared samples to have identical elemental masses.
The relevant constraint is definite proportions for a particular pure compound.
Option B states the strongest conclusion supported without inventing a composition for Q.
351. A researcher measures two non-reacting gases P and Q separately. Each sample contains exactly \(0.20\,\mathrm{mol}\) of molecules. Gas P is measured at a temperature of 300 K, whereas gas Q is measured at 600 K. Both are ideal gases at the same pressure. Which conclusion is correct?
ⓐ. Their measured volumes must be equal because their molecular amounts are equal.
ⓑ. Q must have twice the molar mass of P because its temperature is twice as large.
ⓒ. Q occupies twice P's volume; Avogadro's equal-volume rule assumes the same temperature.
ⓓ. P contains half as many molecules as Q because it occupies the smaller volume.
Correct Answer: Q occupies twice P's volume; Avogadro's equal-volume rule assumes the same temperature.
Explanation: \(\textbf{Identifying the conditions needed for a volume comparison:}\)
Avogadro's law states that equal volumes of gases at the same temperature and pressure contain equal numbers of molecules.
The temperature qualification matters.
The supplied gas samples have equal molecular amounts and equal pressures but are measured at different temperatures.
Therefore, the equal-volume conclusion cannot be applied directly.
\(\textbf{Using the ideal-gas relation:}\)
For each sample,
\[
PV=nRT
\]
At fixed pressure and equal amount of gas,
\[
V\propto T
\]
The temperature ratio is
\[
\frac{T_Q}{T_P}=\frac{600}{300}
\]
\[
\frac{T_Q}{T_P}=2
\]
Therefore,
\[
\frac{V_Q}{V_P}=2
\]
\(\textbf{Separating molecular number from volume:}\)
Both gases contain \(0.20\,\mathrm{mol}\) of molecules.
Their molecular counts are equal:
\[
N_P=N_Q=0.20N_A
\]
The different volumes arise from the different temperatures, not from different numbers of molecules.
The gases need not have equal molar masses; their molecular identities do not determine this temperature-volume ratio for ideal gases.
If the samples were compared at the same temperature and pressure, their equal molecular amounts would correspond to equal volumes.
Thus, the observations do not contradict Avogadro's law.
The correct interpretation is that Q occupies twice the volume of P under the stated unequal-temperature conditions.
\(\textbf{Final answer:}\)
\[
\boxed{V_Q:V_P=2:1}
\]
352. A sealed vessel contains two pure gases, \(\mathrm{H_2}\) and \(\mathrm{Cl_2}\), in equal molecular amounts. They react completely to form HCl:
\[
\mathrm{H_2(g)+Cl_2(g)\rightarrow2HCl(g)}
\]
Assume constant temperature and volume, ideal-gas behaviour and no other reaction. Which statement is correct?
ⓐ. The final pressure is twice the initial pressure because two HCl molecules form.
ⓑ. The total number of gas molecules remains unchanged, but the average molar mass of the gas changes.
ⓒ. The final pressure is unchanged, and the average molar mass is unchanged.
ⓓ. The number of gas molecules is halved because two different reactants form one compound.
Correct Answer: The final pressure is unchanged, and the average molar mass is unchanged.
Explanation: The balanced reaction consumes one hydrogen molecule and one chlorine molecule to form two hydrogen chloride molecules.
Thus, the total number of gaseous molecules remains unchanged for each stoichiometric reaction unit.
Because the initial gases are present in equal molecular amounts, both are consumed completely.
The reaction initially has two molecular quantities of reactants and finally two molecular quantities of product.
At constant temperature and volume, the ideal-gas pressure depends on the total gaseous molecular amount.
The total molecular amount is unchanged, so the pressure remains unchanged.
The average molar mass is total gas mass divided by the total molecular amount.
The vessel is sealed, and the chemical reaction conserves total mass.
Since both the total mass and total molecular amount remain unchanged, the average molar mass also remains unchanged.
This does not mean that the chemical composition is unchanged.
The original gas contains two molecular species, whereas the final gas contains only HCl molecules.
Equal initial molecular amounts give an average molar mass equal to the mean of the individual hydrogen and chlorine molar masses.
That mean equals the molar mass of HCl because
\[
\frac{M_{\mathrm{H_2}}+M_{\mathrm{Cl_2}}}{2}=M_{\mathrm{HCl}}
\]
The equality follows from the balanced atomic composition.
Therefore, the unchanged pressure and average molar mass are both consistent with complete reaction.
353. Two isotope samples of the same element X are prepared. Each contains only isotopes of masses \(10\,\mathrm{u}\) and \(12\,\mathrm{u}\).
Sample P consists of 50% of each isotope by number.
Sample Q consists of 25% of the lighter isotope and 75% of the heavier isotope by number.
Exactly 11.0 g of P is mixed with exactly 11.5 g of Q. What is the average atomic mass of X in the combined sample?
ⓐ. \(11.20\,\mathrm{u}\)
ⓑ. \(11.50\,\mathrm{u}\)
ⓒ. \(11.30\,\mathrm{u}\)
ⓓ. \(11.25\,\mathrm{u}\)
Correct Answer: \(11.25\,\mathrm{u}\)
Explanation: \(\textbf{Calculating the atomic mass of Sample P:}\)
The lighter-isotope fraction is 0.50.
The heavier-isotope fraction is also 0.50.
Therefore,
\[
\overline{m}_P=10(0.50)+12(0.50)
\]
\[
\overline{m}_P=11.0\,\mathrm{u}
\]
Its corresponding molar mass is \(11.0\,\mathrm{g\,mol^{-1}}\).
\(\textbf{Calculating the atomic mass of Sample Q:}\)
The lighter-isotope fraction is 0.25, and the heavier-isotope fraction is 0.75.
\[
\overline{m}_Q=10(0.25)+12(0.75)
\]
\[
\overline{m}_Q=2.5+9.0
\]
\[
\overline{m}_Q=11.5\,\mathrm{u}
\]
\(\textbf{Recovering the amount of atoms contributed by each sample:}\)
The samples are mixed by specified masses, not by equal numbers of atoms.
For P,
\[
n_P=\frac{11.0}{11.0}
\]
\[
n_P=1.00\,\mathrm{mol}
\]
For Q,
\[
n_Q=\frac{11.5}{11.5}
\]
\[
n_Q=1.00\,\mathrm{mol}
\]
The chosen sample masses happen to supply equal numbers of atoms.
\(\textbf{Calculating the combined average:}\)
Since each sample contributes one mole of atoms,
\[
\overline{m}_{\mathrm{combined}}=\frac{1.00(11.0)+1.00(11.5)}{1.00+1.00}
\]
\[
\overline{m}_{\mathrm{combined}}=\frac{22.5}{2}
\]
\[
\overline{m}_{\mathrm{combined}}=11.25\,\mathrm{u}
\]
\(\textbf{Independent isotope-population check:}\)
Sample P contributes \(0.50\,\mathrm{mol}\) of each isotope.
Sample Q contributes \(0.25\,\mathrm{mol}\) lighter and \(0.75\,\mathrm{mol}\) heavier isotope.
The combined isotope amounts are
\[
n_{10}=0.50+0.25=0.75\,\mathrm{mol}
\]
\[
n_{12}=0.50+0.75=1.25\,\mathrm{mol}
\]
The average is
\[
\overline{m}=\frac{0.75(10)+1.25(12)}{2.00}
\]
\[
\overline{m}=11.25\,\mathrm{u}
\]
The two independent routes agree.
The correct weighting is determined by numbers of atoms, not automatically by the masses of the original samples.
\(\textbf{Final answer:}\)
\[
\boxed{\overline{m}_X=11.25\,\mathrm{u}}
\]
354. A 3.0 g sample of a hypothetical molecular element \(\mathrm{X_2}\) contains exactly \(0.10\,\mathrm{mol}\) of molecules. A second sample contains 3.0 g of monatomic X atoms, with the same isotopic composition. Which statement correctly compares the amount of X atoms in the two samples?
ⓐ. Both samples contain \(0.10\,\mathrm{mol}\) of X atoms.
ⓑ. The molecular sample contains twice as many X atoms as the monatomic sample.
ⓒ. Both samples contain \(0.20\,\mathrm{mol}\) of X atoms.
ⓓ. The monatomic sample contains twice as many X atoms as the molecular sample.
Correct Answer: Both samples contain \(0.20\,\mathrm{mol}\) of X atoms.
Explanation: \(\textbf{Determining the molecular molar mass:}\)
The sample contains \(0.10\,\mathrm{mol}\) of \(\mathrm{X_2}\) molecules and weighs 3.0 g.
Therefore,
\[
M_{\mathrm{X_2}}=\frac{3.0}{0.10}
\]
\[
M_{\mathrm{X_2}}=30\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Recovering the atomic molar mass:}\)
Each molecular entity contains two atoms of X.
The atomic molar mass is consequently
\[
M_X=\frac{30}{2}
\]
\[
M_X=15\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Counting X atoms in the molecular sample:}\)
Every \(\mathrm{X_2}\) molecule contributes two X atoms.
\[
n_{X,\mathrm{molecular}}=2(0.10)
\]
\[
n_{X,\mathrm{molecular}}=0.20\,\mathrm{mol}
\]
\(\textbf{Counting X atoms in the monatomic sample:}\)
The second sample contains 3.0 g of monatomic X.
\[
n_{X,\mathrm{monatomic}}=\frac{3.0}{15}
\]
\[
n_{X,\mathrm{monatomic}}=0.20\,\mathrm{mol}
\]
\(\textbf{Explaining the equality:}\)
Both samples contain the same element and have the same isotopic composition.
They also have equal masses.
Consequently, they contain equal total numbers of X atoms.
In the molecular sample, the atoms occur in pairs.
In the monatomic sample, they are counted as individual atoms.
The numbers of chemical entities differ, but the total number of constituent atoms is identical.
Comparing molecular amount directly with monatomic amount without accounting for atomicity would produce an incorrect conclusion.
\(\textbf{Final answer:}\)
\[
\boxed{n_{X,\mathrm{molecular}}=n_{X,\mathrm{monatomic}}=0.20\,\mathrm{mol}}
\]
355. A solid sample contains only a pure hydrated salt \(\mathrm{MgSO_4\cdot xH_2O}\). On careful heating, all water of crystallisation is removed without decomposition of the anhydrous salt. A 12.3 g hydrated sample leaves 6.0 g of anhydrous \(\mathrm{MgSO_4}\). What is x, and what percentage of the hydrated sample's mass was due to water? (Atomic masses: Mg = 24, S = 32, O = 16, H = 1)
ⓐ. \(x=5\) and \(51.22\%\)
ⓑ. \(x=7\) and \(51.22\%\)
ⓒ. \(x=7\) and \(48.78\%\)
ⓓ. \(x=5\) and \(48.78\%\)
Correct Answer: \(x=7\) and \(51.22\%\)
Explanation: \(\textbf{Separating the hydrated sample into its retained and lost components:}\)
The original sample contains magnesium sulphate and water of crystallisation.
The heating process removes only water under the stated conditions.
Therefore, the mass lost equals the original water mass.
\[
m_{\mathrm{water}}=12.3-6.0
\]
\[
m_{\mathrm{water}}=6.3\,\text{g}
\]
\(\textbf{Determining the amount of anhydrous salt:}\)
The molar mass of magnesium sulphate is
\[
M_{\mathrm{MgSO_4}}=24+32+4(16)
\]
\[
M_{\mathrm{MgSO_4}}=120\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
n_{\mathrm{MgSO_4}}=\frac{6.0}{120}
\]
\[
n_{\mathrm{MgSO_4}}=0.050\,\mathrm{mol}
\]
\(\textbf{Determining the water amount:}\)
The molar mass of water is
\[
M_{\mathrm{H_2O}}=18\,\mathrm{g\,mol^{-1}}
\]
Thus,
\[
n_{\mathrm{H_2O}}=\frac{6.3}{18}
\]
\[
n_{\mathrm{H_2O}}=0.350\,\mathrm{mol}
\]
\(\textbf{Finding the formula ratio:}\)
The number of water molecules per magnesium sulphate formula unit is
\[
x=\frac{n_{\mathrm{H_2O}}}{n_{\mathrm{MgSO_4}}}
\]
\[
x=\frac{0.350}{0.050}
\]
\[
x=7
\]
Therefore, the hydrate formula is \(\mathrm{MgSO_4\cdot7H_2O}\).
\(\textbf{Calculating the water mass percentage:}\)
\[
\%\mathrm{water}=\frac{6.3}{12.3}\times100
\]
\[
\%\mathrm{water}\approx51.22\%
\]
\(\textbf{Independent formula-mass check:}\)
The hydrate molar mass is
\[
M_{\mathrm{MgSO_4\cdot7H_2O}}=120+7(18)
\]
\[
M_{\mathrm{hydrate}}=246\,\mathrm{g\,mol^{-1}}
\]
A \(0.050\,\mathrm{mol}\) sample should weigh
\[
m=0.050(246)
\]
\[
m=12.3\,\text{g}
\]
This reproduces the original mass.
The dot in a hydrate formula represents a fixed number of water molecules associated with each formula unit.
It must not be interpreted as a multiplication of the magnesium sulphate subscripts.
\(\textbf{Final answer:}\)
\[
\boxed{x=7,\quad\%\mathrm{water}\approx51.22\%}
\]
356. Two pure compounds have molecular formulae \(\mathrm{NO_2}\) and \(\mathrm{N_2O_4}\). A \(9.2\,\mathrm{g}\) sample of each is selected. Which statement correctly compares the total numbers of nitrogen atoms, total numbers of oxygen atoms and numbers of molecules in the two samples?
ⓐ. All three counts are equal because the compounds have the same empirical formula.
ⓑ. Nitrogen and oxygen atom counts are equal in both samples, but the \(\mathrm{NO_2}\) sample contains twice as many molecules.
ⓒ. The \(\mathrm{N_2O_4}\) sample contains twice as many nitrogen and oxygen atoms, but the molecule counts are equal.
ⓓ. The \(\mathrm{NO_2}\) sample contains twice as many atoms and twice as many molecules.
Correct Answer: Nitrogen and oxygen atom counts are equal in both samples, but the \(\mathrm{NO_2}\) sample contains twice as many molecules.
Explanation: \(\textbf{Identifying the formula relationship:}\)
The molecular formula \(\mathrm{N_2O_4}\) is twice the empirical composition represented by \(\mathrm{NO_2}\).
Consequently, each \(\mathrm{N_2O_4}\) molecule contains twice as many nitrogen atoms and twice as many oxygen atoms as each \(\mathrm{NO_2}\) molecule.
Its molar mass is also twice as large.
\(\textbf{Calculating the molecular amounts:}\)
The molar mass of nitrogen dioxide is
\[
M_{\mathrm{NO_2}}=14+2(16)=46\,\mathrm{g\,mol^{-1}}
\]
The molecular amount in 9.2 g is
\[
n_{\mathrm{NO_2}}=\frac{9.2}{46}=0.20\,\mathrm{mol}
\]
For dinitrogen tetroxide,
\[
M_{\mathrm{N_2O_4}}=2(14)+4(16)=92\,\mathrm{g\,mol^{-1}}
\]
Therefore,
\[
n_{\mathrm{N_2O_4}}=\frac{9.2}{92}=0.10\,\mathrm{mol}
\]
The nitrogen dioxide sample contains twice as many molecules.
\(\textbf{Comparing nitrogen atoms:}\)
\[
n_{N,\mathrm{NO_2}}=1(0.20)=0.20\,\mathrm{mol}
\]
\[
n_{N,\mathrm{N_2O_4}}=2(0.10)=0.20\,\mathrm{mol}
\]
Thus, the nitrogen-atom amounts are equal.
\(\textbf{Comparing oxygen atoms:}\)
\[
n_{O,\mathrm{NO_2}}=2(0.20)=0.40\,\mathrm{mol}
\]
\[
n_{O,\mathrm{N_2O_4}}=4(0.10)=0.40\,\mathrm{mol}
\]
The oxygen-atom amounts are also equal.
\(\textbf{Chemical interpretation:}\)
Equal masses of substances having the same empirical composition contain the same amounts of each constituent element, provided their isotopic compositions are the same.
Their molecular counts can nevertheless differ because the numbers of atoms grouped into individual molecules differ.
The actual molecular formula determines molecular count at a given mass, while the elemental composition determines constituent-atom amounts.
Therefore, Option B is correct.
357. Consider the following Assertion and Reason.
Assertion (A): The law of definite proportions remains useful for identifying the composition of a pure chemical compound even though Dalton's original claim that all atoms of a given element have identical masses is not strictly correct.
Reason (R): Isotopes of an element have the same elemental identity but different masses; the ordinary fixed-composition statement must therefore be interpreted with suitable attention to isotopic composition when extremely precise mass comparisons are made.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The Assertion is correct because the law of definite proportions describes the characteristic elemental composition of a pure compound.
It is an important foundation for understanding chemical formulae and fixed combining relationships.
Dalton's original atomic theory explained chemical combination using atoms that form compounds in simple whole-number ratios.
However, his historical postulate that all atoms of a given element are identical in mass requires qualification.
Modern atomic theory recognises isotopes, which are atoms of the same element having different masses.
The Reason correctly states this qualification.
A compound may retain the same elemental formula while samples prepared from different isotopic compositions have slightly different precisely measured elemental mass percentages.
For example, replacing a lighter isotope with a heavier isotope changes mass without changing the number of atoms represented by the chemical formula.
This does not mean that arbitrary elemental ratios are permitted within one pure compound.
The characteristic atomic composition remains fixed for that compound.
In ordinary chemical calculations, standard atomic masses and typical isotopic compositions provide the mass relationships used in applying definite proportions.
For specially enriched isotopic samples, exact mass comparisons require the actual isotope distribution.
The Reason therefore explains why Dalton's original identical-mass postulate can be modified while the fixed-composition principle remains chemically useful.
Both A and R are true, and R correctly explains A.
358. Four experimental observations are listed.
| Observation | Experimental evidence |
| P | Different preparations of a pure compound have the same elemental mass ratio. |
| Q | Two different compounds of the same two elements contain oxygen masses in a \(2:3\) ratio for the same mass of the other element. |
| R | At equal temperature and pressure, equal volumes of two different gases contain equal numbers of molecules. |
| S | Reacting gaseous volumes and gaseous product volumes are in a simple whole-number ratio at common temperature and pressure. |
Which matching of observations to laws or principles is correct?
ⓐ. P—Conservation of mass; Q—Definite proportions; R—Gay-Lussac's law; S—Avogadro's law
ⓑ. P—Definite proportions; Q—Multiple proportions; R—Avogadro's law; S—Gay-Lussac's law
ⓒ. P—Multiple proportions; Q—Definite proportions; R—Avogadro's law; S—Conservation of mass
ⓓ. P—Definite proportions; Q—Multiple proportions; R—Gay-Lussac's law; S—Avogadro's law
Correct Answer: P—Definite proportions; Q—Multiple proportions; R—Avogadro's law; S—Gay-Lussac's law
Explanation: Observation P compares different samples of the same pure compound.
The distinguishing feature is that its elemental mass ratio remains fixed despite differences in preparation.
This is the law of definite proportions.
Observation Q compares different compounds formed from the same two elements.
The mass of one element is held constant, while the masses of oxygen that combine with it are in a simple whole-number ratio.
This is the law of multiple proportions.
The distinction between P and Q is whether one pure compound or different compounds are being compared.
Observation R relates equal volumes of gases to equal numbers of molecules under the same temperature and pressure conditions.
This is Avogadro's law.
It does not claim that equal gas volumes have equal masses or equal numbers of constituent atoms.
Observation S concerns simple whole-number ratios among gaseous reactant and product volumes at common temperature and pressure.
This is Gay-Lussac's law of gaseous volumes.
The gaseous-volume relationship is linked to molecular amounts by Avogadro's law, but the two laws make different primary statements.
Conservation of mass instead requires the combined mass of the material system to remain constant during an ordinary chemical reaction.
No separate total reactant-product mass balance is the defining evidence in the four listed observations.
Therefore, the correct matching is P—definite proportions, Q—multiple proportions, R—Avogadro's law and S—Gay-Lussac's law.
359. Hydrogen burns in oxygen according to
\[
\mathrm{2H_2(g)+O_2(g)\rightarrow2H_2O}
\]
Two experiments use 4.0 L hydrogen and 2.0 L oxygen at the same initial temperature and pressure, and both reactions proceed completely. In Experiment P, the product water is measured as vapour at a specified reference temperature and pressure. In Experiment Q, the product water is cooled until it becomes liquid. Which conclusion is valid?
ⓐ. Both experiments must produce 4.0 L of liquid water because the reaction coefficient of water is 2.
ⓑ. The chemical amounts of water formed differ because the final physical states differ.
ⓒ. P produces 4.0 L of water vapour at the common reference conditions; Q's liquid volume needs density data.
ⓓ. Experiment Q must produce 2.0 L of liquid water because the initial oxygen volume is 2.0 L.
Correct Answer: P produces 4.0 L of water vapour at the common reference conditions; Q's liquid volume needs density data.
Explanation: \(\textbf{Interpreting the balanced gaseous reaction:}\)
The reactant coefficients require two gaseous molecular quantities of hydrogen for every one of oxygen.
The supplied volumes are in the exact ratio \(4.0:2.0=2:1\).
Therefore, the initial gases are stoichiometrically matched.
\(\textbf{Applying the gaseous-volume relationship:}\)
The balanced reaction produces two moles of water molecules for every two moles of hydrogen molecules consumed.
When the resulting water is gaseous and measured at the same specified temperature and pressure as the comparison gases, its volume ratio follows the molecular coefficient ratio.
\[
V_{\mathrm{H_2}}:V_{\mathrm{O_2}}:V_{\mathrm{H_2O(g)}}=2:1:2
\]
For 4.0 L hydrogen,
\[
V_{\mathrm{H_2O(g)}}=4.0\,\text{L}
\]
\(\textbf{Separating chemical amount from physical state:}\)
Experiment Q follows the same balanced reaction and consumes the same molecular amounts of hydrogen and oxygen.
Thus, it forms the same number of water molecules as Experiment P.
However, its water is subsequently condensed into the liquid phase.
Liquid water does not obey the gaseous volume relationship used for ideal gases.
The reaction coefficient does not specify the volume occupied by a liquid product.
A separate density or equivalent physical property would be required to calculate a liquid volume from its mass.
The absence of that information does not create uncertainty about the number of water molecules formed.
It only prevents determination of their final liquid volume from the gaseous combining-volume law alone.
Therefore, Option C correctly distinguishes the amount of product from its phase-dependent volume.
360. A pure compound has formula \(\mathrm{X_2Y_3}\). A second pure compound containing the same elements has formula \(\mathrm{XY_2}\). A researcher states that the law of multiple proportions can be tested by comparing the masses of Y combining with the same mass of X in the two compounds. If the atomic masses of X and Y are \(20\,\mathrm{u}\) and \(16\,\mathrm{u}\), respectively, what is that Y-mass ratio for \(\mathrm{X_2Y_3}\) and \(\mathrm{XY_2}\), and what conclusion follows?
ⓐ. \(3:2\); the ratio is read directly from the Y subscripts.
ⓑ. \(3:4\); the result illustrates the law of multiple proportions.
ⓒ. \(4:3\); the result illustrates the law of definite proportions.
ⓓ. \(3:4\); the two compounds must have identical elemental mass percentages.
Correct Answer: \(3:4\); the result illustrates the law of multiple proportions.
Explanation: \(\textbf{Identifying the required fixed-element basis:}\)
The two compounds contain different numbers of X atoms per formula unit.
The masses of Y cannot be compared from the Y subscripts alone without accounting for the amount of X.
The law of multiple proportions requires the mass of X to be held fixed.
\(\textbf{Calculating the composition of the first compound:}\)
For \(\mathrm{X_2Y_3}\), the X contribution to formula mass is
\[
m_{X,P}=2(20)
\]
\[
m_{X,P}=40\,\mathrm{u}
\]
The Y contribution is
\[
m_{Y,P}=3(16)
\]
\[
m_{Y,P}=48\,\mathrm{u}
\]
Thus, the Y-to-X mass ratio is
\[
\frac{m_{Y,P}}{m_{X,P}}=\frac{48}{40}
\]
\[
\frac{m_{Y,P}}{m_{X,P}}=\frac65
\]
\(\textbf{Calculating the composition of the second compound:}\)
For \(\mathrm{XY_2}\),
\[
m_{X,Q}=20\,\mathrm{u}
\]
\[
m_{Y,Q}=2(16)=32\,\mathrm{u}
\]
Therefore,
\[
\frac{m_{Y,Q}}{m_{X,Q}}=\frac{32}{20}
\]
\[
\frac{m_{Y,Q}}{m_{X,Q}}=\frac85
\]
\(\textbf{Comparing Y masses at equal X mass:}\)
For a fixed mass of X, the Y masses are proportional to these mass ratios.
\[
m_{Y,P}:m_{Y,Q}=\frac65:\frac85
\]
\[
m_{Y,P}:m_{Y,Q}=6:8
\]
\[
m_{Y,P}:m_{Y,Q}=3:4
\]
\(\textbf{Interpreting the law:}\)
The two different compounds are formed from the same two elements.
For a fixed mass of X, their combining Y masses are in the simple whole-number ratio \(3:4\).
This is consistent with the law of multiple proportions.
The result does not imply identical mass percentages because the Y-to-X mass ratios of the compounds differ.
The law of definite proportions instead describes the fixed composition of each particular pure compound.
\(\textbf{Final answer:}\)
\[
\boxed{m_{Y,\mathrm{X_2Y_3}}:m_{Y,\mathrm{XY_2}}=3:4}
\]
361. A chemist proposes the following explanation for the reaction between hydrogen and chlorine:
\[
\mathrm{H_2(g)+Cl_2(g)\rightarrow2HCl(g)}
\]
At the same temperature and pressure, one volume of hydrogen reacts with one volume of chlorine to produce two volumes of hydrogen chloride.
Consider the following statements.
Statement I: The observed gaseous-volume relationship can be explained by distinguishing molecules from their constituent atoms.
Statement II: The reaction requires hydrogen and chlorine atoms to be created because two product molecules form from two reactant molecules.
Statement III: The balanced equation preserves the numbers of hydrogen and chlorine atoms, although the original molecular species disappear.
Statement IV: Dalton's original atomic theory, without a distinction between atoms and molecules of gaseous elements, was sufficient to explain all such gaseous-volume relationships.
Which statements are correct?
ⓐ. I and II only
ⓑ. I and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I and III only
Explanation: Statement I is correct because the reaction involves diatomic molecules of hydrogen and chlorine.
Each hydrogen molecule contains two hydrogen atoms, while each chlorine molecule contains two chlorine atoms.
One molecule of each reactant consequently supplies enough atoms to form two molecules of HCl.
At the same temperature and pressure, Avogadro's law relates gas volumes to molecular numbers.
The coefficients therefore explain the observed volume ratio \(1:1:2\).
Statement II is incorrect because the formation of two product molecules does not require the creation of atoms.
The two reactant molecules already contain two hydrogen atoms and two chlorine atoms.
These four atoms are redistributed into two HCl molecules.
Statement III is therefore correct.
The elemental inventories remain unchanged even though the identities of the molecules change.
Statement IV is incorrect because Dalton's original treatment did not adequately distinguish atoms from molecules of gaseous elements.
The molecular interpretation associated with Avogadro provides the necessary explanation of the gaseous-volume relationship.
The example illustrates why conservation of atoms does not imply conservation of the number of molecules of every species.
It also shows how a historical limitation of Dalton's model could be resolved without rejecting the principle of elemental atom conservation.
Only Statements I and III are correct.
362. A laboratory compares four samples of a material containing elements A and B. Each sample is homogeneous, and the mass of B present in different sample masses is measured.
The horizontal axis represents the total sample mass in grams.
The vertical axis represents the mass of element B in grams.
The plotted points are (10, 4), (20, 8), (30, 12) and (40, 16). All four points lie on a straight line through the origin.
Which conclusion is most defensible?
ⓐ. The material must be a pure compound because the elemental percentage is constant in the measured samples.
ⓑ. The material must be an element because the graph passes through the origin.
ⓒ. The graph establishes constant elemental proportions, not that the material is a pure compound.
ⓓ. The graph violates the law of definite proportions because the absolute mass of B changes.
Correct Answer: The graph establishes constant elemental proportions, not that the material is a pure compound.
Explanation: \(\textbf{Interpreting the graph quantitatively:}\)
The mass of B increases in direct proportion to the total sample mass.
The ratio for the first measurement is
\[
w_B=\frac{4}{10}=0.40
\]
The other measurements give the same mass fraction:
\[
\frac8{20}=\frac{12}{30}=\frac{16}{40}=0.40
\]
Therefore, the measured material contains 40% B by mass in every tested sample.
The corresponding mass percentage of A is 60%.
\(\textbf{Distinguishing consistency from proof of purity:}\)
A pure compound has a characteristic fixed elemental composition.
The graph is consequently consistent with the behaviour expected for a pure compound containing A and B.
However, a homogeneous mixture prepared with a constant proportion of its components may also show the same linear mass relationship across different sample sizes.
The measurements do not establish that every particle in the material has one identical chemical formula.
Nor do they reveal whether the constituent substances could be separated physically.
The graph passing through the origin means that zero total material contains zero mass of B; it does not establish elemental identity.
The absolute mass of B is expected to increase when the amount of material increases.
Definite proportions concerns the relative masses of constituent elements in a pure compound, not identical absolute masses in differently sized samples.
\(\textbf{Experimental interpretation:}\)
The data support constant bulk composition over the measured range.
They do not uniquely distinguish a pure compound from a uniformly composed mixture.
An additional observation identifying the chemical species or demonstrating suitable physical separation would be needed for that distinction.
Option C correctly separates the experimentally supported composition relationship from an unsupported purity claim.
363. Two different pure oxides P and Q contain only an element X and oxygen. The atomic mass of X is \(28\,\mathrm{u}\).
In P, 7.0 g of X combines with 4.0 g of oxygen.
In Q, 10.5 g of X combines with 12.0 g of oxygen.
What are the empirical formulae of P and Q, respectively, and the ratio of oxygen masses combining with equal masses of X in P and Q? (Atomic mass of O = 16)
ⓐ. \(\mathrm{XO}\), \(\mathrm{XO_2}\); \(1:2\)
ⓑ. \(\mathrm{X_2O}\), \(\mathrm{XO_2}\); \(1:4\)
ⓒ. \(\mathrm{XO}\), \(\mathrm{X_2O_3}\); \(2:3\)
ⓓ. \(\mathrm{X_2O_3}\), \(\mathrm{XO_2}\); \(3:4\)
Correct Answer: \(\mathrm{XO}\), \(\mathrm{XO_2}\); \(1:2\)
Explanation: \(\textbf{Determining the empirical composition of P:}\)
The amount of X atoms represented by the 7.0 g sample contribution is
\[
n_{X,P}=\frac{7.0}{28}
\]
\[
n_{X,P}=0.250\,\mathrm{mol}
\]
The corresponding oxygen-atom amount is
\[
n_{O,P}=\frac{4.0}{16}
\]
\[
n_{O,P}=0.250\,\mathrm{mol}
\]
Therefore,
\[
X:O=0.250:0.250=1:1
\]
The empirical formula of P is \(\mathrm{XO}\).
\(\textbf{Determining the empirical composition of Q:}\)
For Q,
\[
n_{X,Q}=\frac{10.5}{28}
\]
\[
n_{X,Q}=0.375\,\mathrm{mol}
\]
The oxygen-atom amount is
\[
n_{O,Q}=\frac{12.0}{16}
\]
\[
n_{O,Q}=0.750\,\mathrm{mol}
\]
Normalising,
\[
X:O=0.375:0.750
\]
\[
X:O=1:2
\]
Thus, the empirical formula of Q is \(\mathrm{XO_2}\).
\(\textbf{Testing the law of multiple proportions independently:}\)
P contains 4.0 g oxygen for 7.0 g X.
Q contains 12.0 g oxygen for 10.5 g X.
For a common X mass of 21.0 g,
\[
m_{O,P}=4.0\left(\frac{21.0}{7.0}\right)
\]
\[
m_{O,P}=12.0\,\text{g}
\]
For Q,
\[
m_{O,Q}=12.0\left(\frac{21.0}{10.5}\right)
\]
\[
m_{O,Q}=24.0\,\text{g}
\]
Therefore,
\[
m_{O,P}:m_{O,Q}=12.0:24.0
\]
\[
m_{O,P}:m_{O,Q}=1:2
\]
\(\textbf{Connecting the two interpretations:}\)
The empirical formulae show that Q contains twice as many oxygen atoms per X atom as P.
Because the oxygen isotopic composition is taken as ordinary and identical in both compounds, the oxygen mass per fixed mass of X is also doubled.
Thus, the atomic-ratio calculation and the mass-based law of multiple proportions lead to mutually consistent results.
The raw oxygen masses, 4.0 g and 12.0 g, must not be compared directly because the original X masses differ.
\(\textbf{Final answer:}\)
\[
\boxed{P=\mathrm{XO},\quad Q=\mathrm{XO_2},\quad m_{O,P}:m_{O,Q}=1:2}
\]
364. A sealed vessel initially contains eight molecules of \(\mathrm{A_2}\) and nine molecules of \(\mathrm{B_2}\). A and B are different hypothetical elements. The only reaction is
\[
\mathrm{A_2+3B_2\rightarrow2AB_3}
\]
After the reaction, exactly two molecules of \(\mathrm{A_2}\) remain. A student reports that the vessel contains twelve molecules of \(\mathrm{AB_3}\) and no \(\mathrm{B_2}\). Which conclusion is correct?
ⓐ. The report is fully consistent because the number of A atoms is conserved.
ⓑ. The report is inconsistent: at most six \(\mathrm{AB_3}\) molecules can form.
ⓒ. The report is inconsistent because four \(\mathrm{B_2}\) molecules must remain.
ⓓ. The report is consistent if the vessel pressure increases during reaction.
Correct Answer: The report is inconsistent: at most six \(\mathrm{AB_3}\) molecules can form.
Explanation: \(\textbf{Using the measured residual A molecules:}\)
The initial vessel contains eight \(\mathrm{A_2}\) molecules.
Two remain, so the reaction would have consumed
\[
N_{\mathrm{A_2,consumed}}=8-2
\]
\[
N_{\mathrm{A_2,consumed}}=6
\]
According to the balanced equation, six reacting \(\mathrm{A_2}\) molecules would require eighteen \(\mathrm{B_2}\) molecules.
However, only nine \(\mathrm{B_2}\) molecules were initially present.
The reported residual \(\mathrm{A_2}\) count is therefore already incompatible with the available B inventory.
\(\textbf{Determining the actual maximum product count:}\)
The equation requires three \(\mathrm{B_2}\) molecules per reaction unit.
The nine available \(\mathrm{B_2}\) molecules can support
\[
N_{\mathrm{reaction\ units}}=\frac93
\]
\[
N_{\mathrm{reaction\ units}}=3
\]
Each reaction unit produces two \(\mathrm{AB_3}\) molecules.
Thus,
\[
N_{\mathrm{AB_3,max}}=3(2)
\]
\[
N_{\mathrm{AB_3,max}}=6
\]
\(\textbf{Reconstructing a consistent final state:}\)
Three reaction units consume three \(\mathrm{A_2}\) molecules.
Therefore, the amount of unreacted \(\mathrm{A_2}\) would be
\[
N_{\mathrm{A_2,remaining}}=8-3
\]
\[
N_{\mathrm{A_2,remaining}}=5
\]
All nine \(\mathrm{B_2}\) molecules would be consumed.
The consistent final particle inventory would therefore contain five \(\mathrm{A_2}\) molecules and six \(\mathrm{AB_3}\) molecules.
\(\textbf{Elemental conservation check:}\)
Initially, there are \(8(2)=16\) A atoms and \(9(2)=18\) B atoms.
In the consistent final state, the A count is
\[
5(2)+6(1)=16
\]
The B count is
\[
6(3)=18
\]
Both elements are conserved.
The student's reported twelve product molecules would contain 36 B atoms, twice the initial B inventory.
No change in pressure can resolve an elemental atom-count contradiction in the stated closed system.
The maximum permitted product count is six molecules.
365. A gas-volume experiment is conducted at constant temperature and pressure. A hypothetical diatomic gas \(\mathrm{X_2}\) reacts with a hypothetical diatomic gas \(\mathrm{Y_2}\) to form only gaseous \(\mathrm{XY_2}\).
An initial mixture contains 12.0 L of \(\mathrm{X_2}\), 20.0 L of \(\mathrm{Y_2}\) and 5.0 L of inert helium. The limiting reactant reacts completely, and all gases are measured at the same reference conditions.
What are the final total gas volume and the mole fraction of helium in the final mixture?
ⓐ. 27.0 L and \(\dfrac5{27}\)
ⓑ. 25.0 L and \(\dfrac15\)
ⓒ. 27.0 L and \(\dfrac15\)
ⓓ. 17.0 L and \(\dfrac5{17}\)
Correct Answer: 27.0 L and \(\dfrac5{27}\)
Explanation: \(\textbf{Constructing the molecular equation:}\)
The product \(\mathrm{XY_2}\) contains one X atom and two Y atoms per molecule.
To balance the diatomic reactants,
\[
\mathrm{X_2(g)+2Y_2(g)\rightarrow2XY_2(g)}
\]
The corresponding reacting-gas volume ratio is
\[
V_{\mathrm{X_2}}:V_{\mathrm{Y_2}}:V_{\mathrm{XY_2}}=1:2:2
\]
\(\textbf{Identifying the limiting reactant:}\)
Complete reaction of 12.0 L of \(\mathrm{X_2}\) would require
\[
V_{\mathrm{Y_2,required}}=2(12.0)
\]
\[
V_{\mathrm{Y_2,required}}=24.0\,\text{L}
\]
Only 20.0 L of \(\mathrm{Y_2}\) is available.
Therefore, \(\mathrm{Y_2}\) is limiting.
\(\textbf{Recovering the reacting X gas:}\)
\[
V_{\mathrm{X_2,consumed}}=\frac{20.0}{2}
\]
\[
V_{\mathrm{X_2,consumed}}=10.0\,\text{L}
\]
The unreacted X gas corresponds to
\[
V_{\mathrm{X_2,remaining}}=12.0-10.0
\]
\[
V_{\mathrm{X_2,remaining}}=2.0\,\text{L}
\]
\(\textbf{Calculating the product volume:}\)
Two volumes of \(\mathrm{Y_2}\) form two volumes of product.
Therefore,
\[
V_{\mathrm{XY_2,formed}}=20.0\,\text{L}
\]
\(\textbf{Including the inert gas:}\)
Helium does not participate in the reaction.
Its molecular amount remains equivalent to a reference volume of 5.0 L.
The final mixture contains product, excess \(\mathrm{X_2}\) and helium.
\[
V_{\mathrm{final}}=20.0+2.0+5.0
\]
\[
V_{\mathrm{final}}=27.0\,\text{L}
\]
\(\textbf{Finding the helium mole fraction:}\)
At a common temperature and pressure, mole fraction equals the volume fraction.
\[
X_{\mathrm{He}}=\frac{5.0}{27.0}
\]
\[
X_{\mathrm{He}}=\frac5{27}
\]
\(\textbf{Physical interpretation:}\)
Helium contributes to total gas volume but does not change the stoichiometric coefficient ratio between reacting gases.
The initial total reference volume is 37.0 L, while the final volume is 27.0 L.
The decrease arises from the conversion of three gaseous reactant molecular quantities into two product quantities.
The helium mole fraction increases even though no helium is added or removed, because the combined amount of the other gases decreases.
\(\textbf{Final answer:}\)
\[
\boxed{V_{\mathrm{final}}=27.0\,\text{L},\quad X_{\mathrm{He}}=\frac5{27}}
\]
366. A scientist studies a pure molecular substance P containing only elements A and B. A second pure molecular substance Q contains the same elements, and both substances have an A-to-B atomic ratio of \(1:2\). Additional experiments establish that P contains four times as many atoms per molecule as Q. Which conclusion necessarily follows?
ⓐ. Their molecular formulae must be identical because they have the same empirical formula.
ⓑ. The molar mass of P is four times that of Q if both use the same A and B isotopes.
ⓒ. Their molar masses must be identical because the elemental percentages are identical.
ⓓ. P must be a mixture of four molecules of Q rather than an independent molecular substance.
Correct Answer: The molar mass of P is four times that of Q if both use the same A and B isotopes.
Explanation: \(\textbf{Identifying the common empirical composition:}\)
Both substances have the same A-to-B atomic ratio of \(1:2\).
Therefore, their common empirical formula is \(\mathrm{AB_2}\).
The empirical formula specifies the simplest atom ratio and does not necessarily specify the molecular formula.
\(\textbf{Representing the molecular formula of Q:}\)
Let Q contain \(k\) empirical-formula groups per molecule.
Its molecular formula can be written as
\[
\mathrm{A}_{k}\mathrm{B}_{2k}
\]
The total number of constituent atoms per molecule is
\[
N_Q=k+2k=3k
\]
\(\textbf{Applying the fourfold atomicity condition:}\)
The molecular atomicity of P is four times that of Q.
Therefore,
\[
N_P=4(3k)=12k
\]
Because P also has the A-to-B atomic ratio \(1:2\), its molecular formula must be
\[
\mathrm{A}_{4k}\mathrm{B}_{8k}
\]
Thus, every molecular subscript in P is four times the corresponding subscript in Q.
\(\textbf{Comparing molecular molar masses:}\)
Let the atomic molar masses of A and B be \(M_A\) and \(M_B\), respectively.
For Q,
\[
M_Q=kM_A+2kM_B
\]
\[
M_Q=k(M_A+2M_B)
\]
For P,
\[
M_P=4kM_A+8kM_B
\]
\[
M_P=4k(M_A+2M_B)
\]
Hence,
\[
\frac{M_P}{M_Q}=4
\]
This relationship requires the same constituent isotopic masses for both substances, as explicitly stated in option B.
\(\textbf{Evaluating the remaining alternatives:}\)
Option A is incorrect because a common empirical formula does not require identical molecular formulae.
Option C is incorrect because identical elemental mass percentages do not imply identical molecular molar masses.
Option D is incorrect because a molecule containing four times the number of constituent atoms is not necessarily a physical mixture of four smaller molecules.
The supplied information identifies a molecular-size relationship, not a change in the purity of either substance.
\(\textbf{Final conclusion:}\)
The molar mass of P is four times that of Q when the constituent isotopic masses are the same.
367. A mixture contains two hypothetical molecular compounds, AB and \(\mathrm{A_2B_3}\). The atomic masses of A and B are \(12\,\mathrm{u}\) and \(16\,\mathrm{u}\), respectively. A 10.0 g sample of the mixture contains 4.0 g of A in total.
Which statement correctly evaluates the sample's possible composition?
ⓐ. The data require equal masses of the two compounds.
ⓑ. The data are impossible because neither pure compound contains 40% A by mass.
ⓒ. The data are compatible with a mixture, and exactly 6.0 g of AB must be present.
ⓓ. The data are compatible with a mixture, and exactly 7.0 g of AB must be present.
Correct Answer: The data are compatible with a mixture, and exactly 7.0 g of AB must be present.
Explanation: \(\textbf{Calculating the elemental composition of AB:}\)
The molecular mass of AB is
\[
M_{\mathrm{AB}}=12+16
\]
\[
M_{\mathrm{AB}}=28\,\mathrm{u}
\]
Its A mass fraction is
\[
w_{A,\mathrm{AB}}=\frac{12}{28}
\]
\[
w_{A,\mathrm{AB}}=\frac37
\]
\(\textbf{Calculating the elemental composition of the second compound:}\)
For \(\mathrm{A_2B_3}\),
\[
M_{\mathrm{A_2B_3}}=2(12)+3(16)
\]
\[
M_{\mathrm{A_2B_3}}=72\,\mathrm{u}
\]
Its A mass fraction is
\[
w_{A,\mathrm{A_2B_3}}=\frac{24}{72}
\]
\[
w_{A,\mathrm{A_2B_3}}=\frac13
\]
\(\textbf{Constructing the two-component mass balance:}\)
Let \(x\) grams be AB.
The remaining compound mass is \(10.0-x\) grams.
The measured A mass is 4.0 g.
Therefore,
\[
\frac37x+\frac13(10.0-x)=4.0
\]
Multiplying throughout by 21,
\[
9x+7(10.0-x)=84
\]
\[
9x+70-7x=84
\]
\[
2x=14
\]
\[
x=7.0\,\text{g}
\]
Thus, the second compound mass is
\[
m_{\mathrm{A_2B_3}}=10.0-7.0
\]
\[
m_{\mathrm{A_2B_3}}=3.0\,\text{g}
\]
\(\textbf{Checking the composition measurement:}\)
AB contributes
\[
m_{A,\mathrm{AB}}=7.0\left(\frac37\right)=3.0\,\text{g}
\]
The second compound contributes
\[
m_{A,\mathrm{A_2B_3}}=3.0\left(\frac13\right)=1.0\,\text{g}
\]
Their combined A mass is 4.0 g, agreeing with the observation.
\(\textbf{Evaluating the listed choices:}\)
The measured composition is possible because 40% lies between the A mass percentages of the two pure compounds.
The only compatible mass of AB is 7.0 g, leaving 3.0 g of the second compound.
Neither 4.0 g nor 6.0 g of AB would reproduce the measured A inventory.
The recovered composition is physically possible and uniquely determined by the mass and elemental constraints.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{AB}}=7.0\,\text{g},\quad m_{\mathrm{A_2B_3}}=3.0\,\text{g}}
\]
368. Consider the following Assertion and Reason.
Assertion (A): Observing a simple whole-number ratio between the volumes of reacting gases does not by itself establish that their molecular formulae contain the same number of atoms.
Reason (R): Under identical temperature and pressure conditions, gaseous-volume ratios reflect ratios of molecular amounts, while the atomicity of each molecular species must be determined from its chemical formula or independent evidence.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The Assertion is correct because a gaseous-volume measurement compares the numbers of molecular entities under the stated common temperature and pressure conditions.
It does not directly count the atoms contained in each molecule.
For example, one mole of monatomic helium and one mole of diatomic nitrogen contain equal numbers of gaseous particles.
Under identical ideal-gas conditions, they occupy equal volumes.
However, their constituent-atom amounts differ.
A mole of helium atoms contains one mole of constituent atoms, whereas a mole of nitrogen molecules contains two moles of constituent atoms.
The Reason correctly states the distinction between molecule number and molecular atomicity.
Avogadro's law relates gas volumes to molecular amounts at equal temperature and pressure.
Chemical formulae supply the additional information needed to convert molecular amounts into constituent-atom amounts.
In a chemical reaction, the balanced coefficients specify the reacting molecular ratios.
The number of atoms carried by each molecular species is then essential for checking conservation of the elements.
Thus, a simple volume ratio is compatible with different molecular atomicities.
The Reason correctly explains the Assertion.
369. A vessel contains a mixture of two hypothetical molecular species, \(\mathrm{A_2}\) and \(\mathrm{A_3}\), formed from the same element A. An independent experiment shows that exactly 60% of the molecules are \(\mathrm{A_2}\), while the remainder are \(\mathrm{A_3}\).
What percentage of the total constituent atoms belongs to the \(\mathrm{A_3}\) molecules?
ⓐ. \(40\%\)
ⓑ. \(50\%\)
ⓒ. \(60\%\)
ⓓ. \(66.67\%\)
Correct Answer: \(50\%\)
Explanation: \(\textbf{Choosing a molecular-count basis:}\)
The given 60% refers to molecules, not constituent atoms.
Choose a hypothetical collection of 100 molecules.
It contains
\[
N_{\mathrm{A_2}}=60
\]
and
\[
N_{\mathrm{A_3}}=40
\]
molecules.
\(\textbf{Counting atoms belonging to each molecular form:}\)
Each \(\mathrm{A_2}\) molecule contains two A atoms.
Therefore,
\[
N_{A,\mathrm{A_2}}=60(2)
\]
\[
N_{A,\mathrm{A_2}}=120
\]
Each \(\mathrm{A_3}\) molecule contains three A atoms.
Thus,
\[
N_{A,\mathrm{A_3}}=40(3)
\]
\[
N_{A,\mathrm{A_3}}=120
\]
\(\textbf{Calculating the total atom count:}\)
\[
N_{A,\mathrm{total}}=120+120
\]
\[
N_{A,\mathrm{total}}=240
\]
\(\textbf{Determining the required atom percentage:}\)
The fraction of atoms present in \(\mathrm{A_3}\) molecules is
\[
f=\frac{120}{240}
\]
\[
f=\frac12
\]
Therefore,
\[
\%\text{ atoms in }\mathrm{A_3}=50\%
\]
\(\textbf{Interpreting the two percentages:}\)
Although only 40% of the molecules are \(\mathrm{A_3}\), each of those molecules contains more atoms than an \(\mathrm{A_2}\) molecule.
The two species consequently contribute equal numbers of constituent atoms.
The percentage of molecules and the percentage of atoms associated with those molecules are different measures of composition.
This remains true even though all the atoms belong to the same chemical element.
\(\textbf{Final answer:}\)
\[
\boxed{\%\text{ atoms present in }\mathrm{A_3}\text{ molecules}=50\%}
\]
370. A mixture contains equal masses of two different pure compounds, \(\mathrm{CO}\) and \(\mathrm{CO_2}\). Consider the following statements.
Statement I: The mixture's overall carbon-to-oxygen atomic ratio differs from that in either pure compound.
Statement II: The mixture has a fixed composition determined by its preparation, but changing the component masses could change that composition.
Statement III: Since both components contain only carbon and oxygen, the mixture must itself be a pure chemical compound.
Statement IV: The component molecules retain their identities when the gases are mixed without reaction.
Which statements are correct?
ⓐ. I and II only
ⓑ. II, III and IV only
ⓒ. I, II and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and IV only
Explanation: Statement I is correct because equal masses of carbon monoxide and carbon dioxide do not correspond to equal molecular amounts.
Their molar masses are 28 and \(44\,\mathrm{g\,mol^{-1}}\), respectively.
If each component has mass \(m\), the carbon-atom amount is
\[
n_C=\frac{m}{28}+\frac{m}{44}
\]
The oxygen-atom amount is
\[
n_O=\frac{m}{28}+2\left(\frac{m}{44}\right)
\]
These expressions give an overall carbon-to-oxygen ratio distinct from \(1:1\), characteristic of CO, and \(1:2\), characteristic of CO₂.
Statement II is correct because a prepared mixture has a particular overall composition, but that composition is not imposed by a fixed molecular formula.
Changing the relative masses of CO and CO₂ changes the overall elemental ratio without requiring formation of a new compound.
Statement III is incorrect because the presence of only two elements does not establish that all atoms belong to one molecular species.
The mixture contains CO and CO₂ as separate chemical substances.
Statement IV is correct because the stem specifies mixing without chemical reaction.
Under that condition, CO molecules remain CO and CO₂ molecules remain CO₂.
Their chemical identities are not automatically changed by physical mixing.
The overall bulk elemental composition of a mixture must not be confused with the fixed composition of each constituent compound.
Only Statements I, II and IV are correct.
371. An analyst has two pure molecular substances containing elements X and Y. Their molecular formulae are \(\mathrm{X_2Y_2}\) and \(\mathrm{X_3Y_3}\). An initial statement claims that both substances must possess identical elemental mass percentages and that equal-mass samples must contain equal numbers of molecules.
Which evaluation is correct? Assume identical isotope compositions of X and Y in both substances.
ⓐ. Both claims are correct.
ⓑ. Both claims are incorrect.
ⓒ. The percentage claim is incorrect, but the equal-molecule-count claim is correct.
ⓓ. The percentage claim is correct, but the equal-molecule-count claim is incorrect.
Correct Answer: The percentage claim is correct, but the equal-molecule-count claim is incorrect.
Explanation: The formulae \(\mathrm{X_2Y_2}\) and \(\mathrm{X_3Y_3}\) both reduce to the empirical atomic ratio \(X:Y=1:1\).
Thus, their elemental mass percentages depend on the same relative numbers of X and Y atoms and their corresponding atomic masses.
The first claim is therefore correct under the stated common isotope composition.
However, a molecule of \(\mathrm{X_3Y_3}\) contains six atoms, while a molecule of \(\mathrm{X_2Y_2}\) contains four atoms.
Every constituent atomic count in the larger molecule is \(3/2\) times the corresponding count in the smaller one.
Consequently, its molecular mass is also \(3/2\) times as large.
For equal sample masses, the number of molecules is inversely proportional to molecular mass.
The sample of \(\mathrm{X_2Y_2}\) therefore contains more molecules than the equal-mass sample of \(\mathrm{X_3Y_3}\).
Their molecule-count ratio is \(3:2\), not \(1:1\).
Both equal-mass samples nevertheless contain the same total mass of X and the same total mass of Y.
The elemental mass percentages are controlled by empirical composition, while molecular count is controlled by actual molecular molar mass.
Therefore, the first claim is correct and the second is incorrect.
372. A scientist investigates whether a newly prepared sample S is a pure compound or a mixture. S is homogeneous and contains elements A and B. A small portion is separated physically into two fractions whose measured elemental mass percentages differ.
Which conclusion is justified, assuming the separation introduced no chemical change or contamination?
ⓐ. S was a mixture; physical fractions of one pure compound would have identical elemental percentages.
ⓑ. S must have been a pure compound because it appeared homogeneous.
ⓒ. Physical separation necessarily changes the atomic masses of the constituent elements.
ⓓ. The differing elemental percentages demonstrate a violation of conservation of mass.
Correct Answer: S was a mixture; physical fractions of one pure compound would have identical elemental percentages.
Explanation: A pure chemical compound has a characteristic elemental composition.
If a sample consists entirely of one pure compound, ordinary physical separation of portions does not alter the compound's molecular or formula-unit composition.
Thus, the elemental mass percentages in separated portions of that pure compound should remain the same, provided there is no chemical change, isotope separation or contamination.
The problem states that the separation is physical and that the recovered fractions have different measured elemental percentages.
This observation is inconsistent with S being a single pure compound under the specified conditions.
It is consistent with S having contained more than one chemical substance before separation.
The fact that S was homogeneous does not establish purity.
A homogeneous mixture may have a uniform appearance and composition before its constituents are separated.
No change in atomic mass is required to explain the different compositions of its fractions.
The law of conservation of mass is not violated merely because the fractions have different elemental mass percentages.
The total masses and elemental inventories of the original sample and all recovered fractions would still need to balance.
The decisive evidence is the separation into fractions with different chemical compositions without chemical transformation.
Therefore, S must have been a mixture under the stated experimental assumptions.
373. A historical model assumes that all elementary gases consist of isolated atoms rather than molecules. It is used to interpret an experiment in which one volume of gaseous A reacts with one volume of gaseous B to form two volumes of gaseous product AB, all volumes being measured at the same temperature and pressure.
Which observation creates the central difficulty for the isolated-atom model when Avogadro's equal-volume relationship is also applied?
ⓐ. The gaseous product would have a greater total mass than the two original reactant gases combined.
ⓑ. The equal reactant volumes would contain unequal particle counts at the same temperature and pressure.
ⓒ. Two product volumes require twice the available A and B atoms if the elementary gases are monatomic.
ⓓ. The gaseous AB product could not contain two different elements chemically bonded in one particle.
Correct Answer: Two product volumes require twice the available A and B atoms if the elementary gases are monatomic.
Explanation: Under Avogadro's equal-volume relationship, equal volumes of gases at the same temperature and pressure contain equal numbers of gaseous particles.
Let each reactant volume contain \(N\) particles.
If the gases consisted of isolated A and B atoms, the reactants would provide \(N\) A atoms and \(N\) B atoms.
The product AB requires one A atom and one B atom per particle.
Therefore, the available atoms could form only \(N\) AB particles.
However, the measured product volume is twice either individual reactant volume.
Under the same temperature and pressure conditions, that corresponds to \(2N\) product particles.
The isolated-atom assumption therefore gives an inadequate atomic inventory for the observed molecular product count.
A molecular interpretation resolves the difficulty.
If the initial particles are \(\mathrm{A_2}\) and \(\mathrm{B_2}\) molecules, each reactant volume containing \(N\) molecules supplies \(2N\) atoms of its element.
These atoms can form \(2N\) AB molecules.
The reaction is then represented by
\[
\mathrm{A_2+B_2\rightarrow2AB}
\]
The volume relationship and elemental atom conservation become mutually consistent.
The experimental problem is not a failure of mass conservation.
It is the failure of the initial assumption that every gaseous elementary particle must be an isolated atom.
This illustrates the importance of distinguishing atoms from molecules in explaining gaseous combining volumes.
374. A sample of a pure hypothetical element X contains two isotopes of masses 20 u and 22 u. Its average atomic mass is 21 u. Another pure elemental sample Y contains only atoms of mass 21 u.
Consider the following statements.
Statement I: One mole of X atoms and one mole of Y atoms have equal masses.
Statement II: The equal average atomic masses establish that X and Y are the same element.
Statement III: Equal masses of the two samples contain equal numbers of atoms, provided their stated average atomic masses apply.
Statement IV: The isotope distribution of X must contain equal numbers of the two specified isotopes.
Which statements are correct?
ⓐ. I and II only
ⓑ. I and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, III and IV only
Explanation: Statement I is correct because the average atomic masses of both elemental samples are numerically 21 u.
Therefore, their corresponding molar masses are numerically \(21\,\mathrm{g\,mol^{-1}}\).
One mole of atoms from either sample consequently has a mass of 21 g.
Statement II is incorrect because equal atomic masses or equal average atomic masses do not establish identical elemental identities.
The elemental identity of an atom is determined by its atomic number, not merely by its mass.
Different elements may possess atoms or isotope averages with equal or very similar masses.
Statement III is correct under the stated average-mass conditions.
For a sample mass \(m\), the atomic amount is \(m/M\).
Since both samples have the same average atomic molar mass, equal sample masses correspond to equal amounts of atoms and hence equal atomic counts.
Statement IV is correct because X contains only isotopes of masses 20 u and 22 u.
Let the heavier-isotope fraction be \(f\).
The weighted-average equation is
\[
20(1-f)+22f=21
\]
\[
20+2f=21
\]
\[
f=\frac12
\]
Thus, each isotope accounts for half of the X atoms.
The result distinguishes average atomic mass from elemental identity and connects isotope abundance with mass-to-mole comparisons.
Statements I, III and IV are correct.
375. Two pure compounds P and Q are formed from the same elements X and oxygen. Each contains exactly 40.0% X by mass and 60.0% oxygen by mass. A student concludes that P and Q must have identical molecular formulae.
Which additional observation would directly invalidate that conclusion while remaining compatible with both compounds having the reported elemental percentages?
ⓐ. Independent measurements show that Q and P contain oxygen of the same isotopic composition.
ⓑ. Independent measurements show that the tested portion of Q has twice the bulk mass of that of P.
ⓒ. Independent measurements show that the density of Q differs from that of P at the same temperature.
ⓓ. Independent measurements confirm both are molecular substances and Q has twice P's molecular molar mass.
Correct Answer: Independent measurements confirm both are molecular substances and Q has twice P's molecular molar mass.
Explanation: Equal elemental mass percentages establish that P and Q have the same overall mass proportions of X and oxygen under the specified composition measurements.
With the same atomic masses, those proportions lead to the same simplest elemental atomic ratio.
Thus, the compounds can share an empirical formula.
However, an empirical formula does not necessarily determine an actual molecular formula.
For molecular substances, the molecular formula is a positive whole-number multiple of the empirical formula.
If P has one molecular multiplier and Q has a multiplier twice as large, Q has twice the molecular molar mass of P.
Their elemental mass percentages remain unchanged because every constituent atom count has been multiplied by the same factor.
The additional observation in Option D therefore directly establishes different molecular sizes under the molecular-substance assumption.
Their molecular formulae cannot be identical if their molecular molar masses are exactly different for the same isotopic compositions.
Different sample masses do not imply different molecular formulae because sample mass depends on the amount taken.
Different densities may arise from differences in physical conditions or molecular arrangements and do not by themselves establish different molecular formulae.
Identical oxygen isotopic composition is compatible with identical or different molecular formulae.
The decisive evidence is the independently established difference in molecular molar mass.
The student's conclusion confuses equal empirical composition with identical molecular formulae.
376. A pure compound X contains only carbon, hydrogen and oxygen. Complete combustion of 4.6 g of X produces 8.8 g of \(\mathrm{CO_2}\) and 5.4 g of \(\mathrm{H_2O}\). An independent measurement gives the molar mass of X as \(46\,\mathrm{g\,mol^{-1}}\). Which conclusion correctly identifies the molecular formula of X and the mass of oxygen gas consumed during its combustion? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. \(\mathrm{C_2H_6O}\) and 9.6 g \(\mathrm{O_2}\)
ⓑ. \(\mathrm{C_2H_6O}\) and 11.2 g \(\mathrm{O_2}\)
ⓒ. \(\mathrm{CH_3O}\) and 9.6 g \(\mathrm{O_2}\)
ⓓ. \(\mathrm{C_2H_6O_2}\) and 8.0 g \(\mathrm{O_2}\)
Correct Answer: \(\mathrm{C_2H_6O}\) and 9.6 g \(\mathrm{O_2}\)
Explanation: \(\textbf{Recovering carbon from the combustion product:}\)
All carbon in X is converted into carbon dioxide.
The amount of carbon dioxide collected is
\[
n_{\mathrm{CO_2}}=\frac{8.8}{44}
\]
\[
n_{\mathrm{CO_2}}=0.200\,\mathrm{mol}
\]
Each carbon dioxide molecule contains one carbon atom.
Therefore,
\[
n_C=0.200\,\mathrm{mol}
\]
\[
m_C=0.200(12)=2.4\,\text{g}
\]
\(\textbf{Recovering hydrogen from water:}\)
The amount of water produced is
\[
n_{\mathrm{H_2O}}=\frac{5.4}{18}
\]
\[
n_{\mathrm{H_2O}}=0.300\,\mathrm{mol}
\]
Each water molecule contains two hydrogen atoms.
\[
n_H=2(0.300)=0.600\,\mathrm{mol}
\]
\[
m_H=0.600(1)=0.6\,\text{g}
\]
\(\textbf{Determining oxygen originally present in X:}\)
The original compound contains only C, H and O.
The oxygen mass in X is consequently obtained by subtraction from the original sample mass.
\[
m_{O,\mathrm{X}}=4.6-2.4-0.6
\]
\[
m_{O,\mathrm{X}}=1.6\,\text{g}
\]
\[
n_{O,\mathrm{X}}=\frac{1.6}{16}=0.100\,\mathrm{mol}
\]
\(\textbf{Establishing the empirical formula:}\)
\[
n_C:n_H:n_O=0.200:0.600:0.100
\]
Dividing by the smallest value,
\[
C:H:O=2:6:1
\]
The empirical formula is \(\mathrm{C_2H_6O}\).
Its empirical formula mass is
\[
M_{\mathrm{emp}}=2(12)+6(1)+16
\]
\[
M_{\mathrm{emp}}=46\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Using the independently measured molar mass:}\)
\[
k=\frac{M_{\mathrm{molecular}}}{M_{\mathrm{emp}}}
\]
\[
k=\frac{46}{46}=1
\]
Therefore, the molecular formula is also \(\mathrm{C_2H_6O}\).
\(\textbf{Reconstructing external oxygen consumption:}\)
The products contain oxygen from both the original compound and the oxygen gas supplied during combustion.
The oxygen mass in carbon dioxide is
\[
m_{O,\mathrm{CO_2}}=8.8\left(\frac{32}{44}\right)
\]
\[
m_{O,\mathrm{CO_2}}=6.4\,\text{g}
\]
The oxygen mass in water is
\[
m_{O,\mathrm{H_2O}}=5.4\left(\frac{16}{18}\right)
\]
\[
m_{O,\mathrm{H_2O}}=4.8\,\text{g}
\]
Thus,
\[
m_{O,\mathrm{products}}=6.4+4.8=11.2\,\text{g}
\]
The original compound already supplied 1.6 g oxygen.
Hence,
\[
m_{\mathrm{O_2,consumed}}=11.2-1.6
\]
\[
m_{\mathrm{O_2,consumed}}=9.6\,\text{g}
\]
\(\textbf{Independent mass-balance check:}\)
\[
m_{\mathrm{reactants}}=4.6+9.6=14.2\,\text{g}
\]
\[
m_{\mathrm{products}}=8.8+5.4=14.2\,\text{g}
\]
The two totals agree.
An important distinction is that the oxygen found in combustion products need not have originated entirely from atmospheric oxygen.
The original oxygen content of X must be accounted for before calculating the oxygen gas consumed.
\(\textbf{Final answer:}\)
\[
\boxed{\mathrm{C_2H_6O},\quad m_{\mathrm{O_2}}=9.6\,\text{g}}
\]
377. Consider the following Assertion and Reason.
Assertion (A): A sample of pure water and a sample of an aqueous sodium chloride solution may both appear homogeneous, but only the pure water has a fixed chemical composition corresponding to a single molecular substance.
Reason (R): Homogeneity describes uniformity of composition within a sample, whereas chemical purity requires that the material consist of only one chemical substance.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The Assertion is correct because a homogeneous material need not be a pure substance.
Pure water consists of water molecules and has the chemical formula \(\mathrm{H_2O}\).
Its hydrogen-to-oxygen atomic ratio is fixed at \(2:1\).
An aqueous sodium chloride solution contains water and dissolved sodium and chloride ions.
When uniformly mixed, the solution has the same composition throughout the portions examined.
Nevertheless, the amount of dissolved sodium chloride relative to water can be changed by adding more solute or solvent.
Its bulk composition is therefore not fixed by a single chemical formula.
The Reason correctly distinguishes the two properties.
Homogeneity concerns spatial uniformity within the sample.
Purity concerns the number of distinct chemical substances present.
A homogeneous solution may contain multiple chemical species.
The distinction also explains why physical appearance alone cannot establish whether an unknown sample is a pure compound.
Both statements are correct, and the Reason directly explains the Assertion.
378. A binary compound contains only elements X and oxygen. The average atomic mass of X is \(24\,\mathrm{u}\), and the compound contains exactly 40% oxygen by mass. A \(12.0\,\mathrm{g}\) sample of the compound contains \(0.20\,\mathrm{mol}\) of X atoms. Which conclusion correctly describes its empirical formula and whether the supplied measurements are mutually consistent? (Atomic mass of O = 16)
ⓐ. \(\mathrm{XO}\); all measurements are consistent.
ⓑ. \(\mathrm{X_2O_3}\); all measurements are consistent.
ⓒ. \(\mathrm{XO}\); the X-atom amount contradicts the percentage composition.
ⓓ. \(\mathrm{X_2O_3}\); the X-atom amount contradicts the percentage composition.
Correct Answer: \(\mathrm{XO}\); the X-atom amount contradicts the percentage composition.
Explanation: \(\textbf{Deriving the empirical composition independently:}\)
Consider 100 g of the compound.
It contains 60 g X and 40 g oxygen.
The corresponding atomic amounts are
\[
n_X=\frac{60}{24}
\]
\[
n_X=2.50\,\mathrm{mol}
\]
\[
n_O=\frac{40}{16}
\]
\[
n_O=2.50\,\mathrm{mol}
\]
Therefore,
\[
n_X:n_O=2.50:2.50=1:1
\]
The empirical formula is \(\mathrm{XO}\).
\(\textbf{Testing the independent X-atom measurement:}\)
The 12.0 g sample contains 60% X by mass.
Its expected X mass is
\[
m_X=12.0\left(\frac{60}{100}\right)
\]
\[
m_X=7.2\,\text{g}
\]
The expected amount of X atoms is
\[
n_{X,\mathrm{expected}}=\frac{7.2}{24}
\]
\[
n_{X,\mathrm{expected}}=0.300\,\mathrm{mol}
\]
However, the reported amount is only \(0.200\,\mathrm{mol}\).
\(\textbf{Checking the contradiction in reverse:}\)
If the X-atom amount were really \(0.200\,\mathrm{mol}\), the mass of X would be
\[
m_{X,\mathrm{reported}}=0.200(24)
\]
\[
m_{X,\mathrm{reported}}=4.8\,\text{g}
\]
For a 12.0 g sample, this corresponds to
\[
\%X=\frac{4.8}{12.0}\times100
\]
\[
\%X=40\%
\]
That would imply 60% oxygen, not the specified 40%.
\(\textbf{Interpreting the evidence:}\)
The first two measurements determine the empirical formula \(\mathrm{XO}\).
The independently supplied X-atom amount does not agree with that composition.
Changing the molecular multiplier would not resolve the contradiction because it would not change the elemental mass percentages or the X-atom amount per gram.
The correct conclusion is therefore that the empirical formula follows from the stated composition, but the complete set of measurements is inconsistent.
379. A pure ionic compound has the formula \(\mathrm{M_2(SO_4)_3}\), where M is an unknown element. A \(17.1\,\mathrm{g}\) sample contains \(0.60\,\mathrm{mol}\) of oxygen atoms. What is the atomic mass of M, and how many moles of M ions would be obtained if the sample dissociated completely into its constituent ions? (Atomic masses: S = 32, O = 16)
ⓐ. \(27\,\mathrm{u}\) and \(0.10\,\mathrm{mol}\)
ⓑ. \(27\,\mathrm{u}\) and \(0.05\,\mathrm{mol}\)
ⓒ. \(56\,\mathrm{u}\) and \(0.10\,\mathrm{mol}\)
ⓓ. \(56\,\mathrm{u}\) and \(0.05\,\mathrm{mol}\)
Correct Answer: \(27\,\mathrm{u}\) and \(0.10\,\mathrm{mol}\)
Explanation: \(\textbf{Using oxygen atoms to count formula units:}\)
Each formula unit of \(\mathrm{M_2(SO_4)_3}\) contains three sulphate groups.
Each sulphate group contains four oxygen atoms.
Therefore, each formula unit contains twelve oxygen atoms.
\[
n_O=12n_{\mathrm{formula\ units}}
\]
Substituting the measured oxygen-atom amount,
\[
0.60=12n_{\mathrm{formula\ units}}
\]
\[
n_{\mathrm{formula\ units}}=0.050\,\mathrm{mol}
\]
\(\textbf{Recovering the formula molar mass:}\)
The sample weighs 17.1 g.
\[
M_{\mathrm{compound}}=\frac{m}{n}
\]
\[
M_{\mathrm{compound}}=\frac{17.1}{0.050}
\]
\[
M_{\mathrm{compound}}=342\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Separating the sulphate contribution:}\)
One sulphate group contributes
\[
M_{\mathrm{SO_4}}=32+4(16)
\]
\[
M_{\mathrm{SO_4}}=96\,\mathrm{g\,mol^{-1}}
\]
Three such groups contribute
\[
3(96)=288\,\mathrm{g\,mol^{-1}}
\]
Let the atomic mass of M be \(a\,\mathrm{u}\).
Then,
\[
2a+288=342
\]
\[
2a=54
\]
\[
a=27
\]
Thus, the atomic mass of M is \(27\,\mathrm{u}\).
\(\textbf{Counting the metal ions after complete dissociation:}\)
Each formula unit contains two M ions.
Hence,
\[
n_{\mathrm{M\ ions}}=2n_{\mathrm{formula\ units}}
\]
\[
n_{\mathrm{M\ ions}}=2(0.050)
\]
\[
n_{\mathrm{M\ ions}}=0.100\,\mathrm{mol}
\]
\(\textbf{Independent mass check:}\)
The metal contribution is
\[
m_M=0.100(27)=2.7\,\text{g}
\]
The three sulphate groups contribute
\[
m_{\mathrm{sulphate}}=0.050(288)=14.4\,\text{g}
\]
Therefore,
\[
m_{\mathrm{total}}=2.7+14.4=17.1\,\text{g}
\]
The reconstructed composition agrees with the sample mass.
The calculation distinguishes formula units, constituent oxygen atoms and metal ions as different entities.
\(\textbf{Final answer:}\)
\[
\boxed{m_M=27\,\mathrm{u},\quad n_{\mathrm{M\ ions}}=0.100\,\mathrm{mol}}
\]
380. Two pure molecular compounds have the empirical formula \(\mathrm{CH_2O}\). Compound P has a molar mass of \(60\,\mathrm{g\,mol^{-1}}\), while compound Q has a molar mass of \(90\,\mathrm{g\,mol^{-1}}\). A mixture contains equal numbers of P and Q molecules. What is the oxygen mass percentage in the mixture, and what is the ratio of carbon atoms contributed by P and Q, respectively? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. \(53.33\%\) and \(1:1\)
ⓑ. \(40.00\%\) and \(2:3\)
ⓒ. \(53.33\%\) and \(2:3\)
ⓓ. \(40.00\%\) and \(1:1\)
Correct Answer: \(53.33\%\) and \(2:3\)
Explanation: \(\textbf{Recovering the molecular formulae:}\)
The empirical formula mass is
\[
M_{\mathrm{CH_2O}}=12+2(1)+16
\]
\[
M_{\mathrm{CH_2O}}=30\,\mathrm{g\,mol^{-1}}
\]
For P,
\[
k_P=\frac{60}{30}=2
\]
Thus, P has molecular formula \(\mathrm{C_2H_4O_2}\).
For Q,
\[
k_Q=\frac{90}{30}=3
\]
Thus, Q has molecular formula \(\mathrm{C_3H_6O_3}\).
\(\textbf{Applying the equal-molecule condition:}\)
Equal numbers of P and Q molecules correspond to equal mole amounts.
Choose one mole of each as the calculation basis.
The total mass is
\[
m_{\mathrm{mixture}}=60+90
\]
\[
m_{\mathrm{mixture}}=150\,\text{g}
\]
\(\textbf{Counting oxygen atoms and their mass:}\)
One mole of P molecules contains two moles of oxygen atoms.
One mole of Q molecules contains three moles of oxygen atoms.
Therefore,
\[
n_O=2+3=5\,\mathrm{mol}
\]
The oxygen mass is
\[
m_O=5(16)=80\,\text{g}
\]
\(\textbf{Determining oxygen mass percentage:}\)
\[
\%O=\frac{80}{150}\times100
\]
\[
\%O\approx53.33\%
\]
\(\textbf{Comparing the carbon contributions:}\)
One mole of P molecules contains two moles of carbon atoms.
One mole of Q molecules contains three moles of carbon atoms.
Therefore,
\[
n_{C,P}:n_{C,Q}=2:3
\]
\(\textbf{Explaining the composition invariant:}\)
Both compounds are molecular multiples of the same empirical formula.
The oxygen mass fraction of each pure compound is
\[
w_O=\frac{16}{30}
\]
Therefore, any non-reacting mixture of the two compounds also has the same oxygen mass fraction.
However, the individual carbon-atom contributions depend on the numbers of molecules of each compound and the carbon atoms per molecule.
Equal molecule counts do not imply equal carbon-atom counts.
The molecular multipliers are needed for the second requested quantity, even though they do not affect the overall oxygen percentage.
\(\textbf{Final answer:}\)
\[
\boxed{\%O=53.33\%,\quad n_{C,P}:n_{C,Q}=2:3}
\]
381. A mixture consists only of two pure compounds, \(\mathrm{Na_2CO_3}\) and \(\mathrm{K_2CO_3}\). Exactly \(0.20\,\mathrm{mol}\) of the mixture's carbonate formula units is present. The mixture reacts completely with excess hydrochloric acid, producing 8.8 g of carbon dioxide. Which additional measurement would be sufficient to determine the original amounts of the two carbonates uniquely? (Atomic masses: Na = 23, K = 39, C = 12, O = 16)
ⓐ. The exact amount of carbon dioxide produced, measured again using a different collection vessel
ⓑ. The total number of carbon atoms present in the original mixture
ⓒ. The mass of the original solid mixture
ⓓ. The total amount of HCl consumed during complete reaction
Correct Answer: The mass of the original solid mixture
Explanation: The two carbonates have different formula molar masses.
However, both contain exactly one carbonate group per formula unit.
Their reactions with excess HCl each produce one mole of carbon dioxide per mole of carbonate formula units.
Thus, the total carbonate amount already determines the carbon dioxide amount.
For \(0.20\,\mathrm{mol}\) of combined formula units,
\[
n_{\mathrm{CO_2}}=0.20\,\mathrm{mol}
\]
The corresponding mass is
\[
m_{\mathrm{CO_2}}=0.20(44)
\]
\[
m_{\mathrm{CO_2}}=8.8\,\text{g}
\]
Therefore, measuring carbon dioxide again would not create an independent composition constraint.
The total carbon-atom amount is also automatically \(0.20\,\mathrm{mol}\), because each carbonate formula unit contains one carbon atom.
Both carbonates consume two moles of HCl per mole of formula units.
Consequently, the total HCl consumption would necessarily be \(0.40\,\mathrm{mol}\), regardless of the mixture proportions.
By contrast, the formula molar masses are different:
\[
M_{\mathrm{Na_2CO_3}}=106\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{K_2CO_3}}=138\,\mathrm{g\,mol^{-1}}
\]
If \(x\) and \(y\) denote their amounts, the existing information gives
\[
x+y=0.20
\]
An original mixture-mass measurement \(m\) would provide
\[
106x+138y=m
\]
These two equations are independent because their mass coefficients differ.
They can therefore be solved uniquely for the component amounts when a physically consistent value of \(m\) is supplied.
This question distinguishes a genuinely independent composition measurement from repeated measurements of quantities already fixed by the same stoichiometric relationship.
382. A gaseous element X exists as diatomic \(\mathrm{X_2}\) molecules. It reacts with diatomic \(\mathrm{Y_2}\) to produce a single gaseous compound. A fixed 6.0 L sample of \(\mathrm{X_2}\) is mixed with increasing volumes of \(\mathrm{Y_2}\), and each mixture is reacted completely as far as the limiting reagent permits.
The horizontal axis represents the initially supplied volume of Y₂, in litres.
The vertical axis represents the maximum volume of gaseous compound formed, in litres.
All volumes are measured at the same temperature and pressure.
The graph starts at the origin, rises linearly through the point (6.0 L, 4.0 L), reaches the point (9.0 L, 6.0 L), and then remains horizontal at a product volume of 6.0 L for every larger initial Y₂ volume.
Which molecular formula is consistent with this graph?
ⓐ. \(\mathrm{XY}\)
ⓑ. \(\mathrm{X_2Y_3}\)
ⓒ. \(\mathrm{X_4Y_3}\)
ⓓ. \(\mathrm{XY_2}\)
Correct Answer: \(\mathrm{X_2Y_3}\)
Explanation: \(\textbf{Interpreting the plateau:}\)
The initial \(\mathrm{X_2}\) volume is fixed at 6.0 L.
Increasing the amount of \(\mathrm{Y_2}\) initially increases the product volume.
At 9.0 L of supplied \(\mathrm{Y_2}\), the product reaches its maximum volume.
Beyond that amount, extra \(\mathrm{Y_2}\) cannot increase production because the fixed \(\mathrm{X_2}\) supply limits the reaction.
Therefore, the stoichiometric reacting-volume ratio is
\[
V_{\mathrm{X_2}}:V_{\mathrm{Y_2}}=6.0:9.0
\]
\[
V_{\mathrm{X_2}}:V_{\mathrm{Y_2}}=2:3
\]
\(\textbf{Using the observed product volume:}\)
At the stoichiometric point, 6.0 L of product is formed.
The full reacting-volume relationship is
\[
V_{\mathrm{X_2}}:V_{\mathrm{Y_2}}:V_{\mathrm{product}}=6:9:6
\]
Simplifying,
\[
V_{\mathrm{X_2}}:V_{\mathrm{Y_2}}:V_{\mathrm{product}}=2:3:2
\]
\(\textbf{Translating volumes into molecular coefficients:}\)
At equal temperature and pressure, gaseous volumes are proportional to molecular amounts.
Therefore, the corresponding balanced equation must have the coefficient relationship
\[
2\mathrm{X_2}+3\mathrm{Y_2}\rightarrow2(\text{product})
\]
\(\textbf{Conserving the X atoms:}\)
The two \(\mathrm{X_2}\) reactant molecules contain four X atoms.
These atoms are distributed among two product molecules.
Each product molecule must therefore contain
\[
\frac42=2
\]
X atoms.
\(\textbf{Conserving the Y atoms:}\)
Three \(\mathrm{Y_2}\) reactant molecules contain six Y atoms.
Distributed among two product molecules, this gives
\[
\frac62=3
\]
Y atoms per molecule.
The molecular formula is consequently \(\mathrm{X_2Y_3}\).
\(\textbf{Verifying the graph's intermediate point:}\)
When 6.0 L of \(\mathrm{Y_2}\) is supplied, it is limiting.
The equation predicts
\[
V_{\mathrm{product}}=6.0\left(\frac23\right)
\]
\[
V_{\mathrm{product}}=4.0\,\text{L}
\]
This agrees with the plotted point.
The plateau and the rising-line slope together reveal the complete reacting-volume ratio.
Conservation of constituent atoms then determines the molecular formula.
\(\textbf{Final answer:}\)
\[
\boxed{\mathrm{X_2Y_3}}
\]
383. Two gases P and Q consist of identical diatomic molecules of the same element X, but their isotopic compositions differ. Each gas sample contains exactly \(0.50\,\mathrm{mol}\) of molecules. In P, every X atom has mass \(20\,\mathrm{u}\). In Q, every X atom has mass \(22\,\mathrm{u}\).
The two samples are measured at the same temperature and pressure. Which statement is correct?
ⓐ. P has a larger volume because its individual molecules are lighter.
ⓑ. Q contains more constituent atoms because its molecules are heavier.
ⓒ. Both samples have equal molecule counts, atom counts and volumes, but Q has greater mass.
ⓓ. Their sample masses are equal because both gases have formula \(\mathrm{X_2}\).
Correct Answer: Both samples have equal molecule counts, atom counts and volumes, but Q has greater mass.
Explanation: The two samples contain the same amount of molecular entities, \(0.50\,\mathrm{mol}\).
Consequently, they contain the same number of molecules.
Every molecule is diatomic, so each sample also contains one mole of constituent X atoms.
The isotope masses differ, but isotope substitution does not change the number of atoms in each molecule.
At the same temperature and pressure, equal molecular amounts of ideal gases occupy equal volumes.
Therefore, the two gas volumes are equal under the stated conditions.
However, the molecular masses differ.
For P, each molecule contains two atoms of mass 20 u, giving a molecular mass of 40 u.
For Q, each molecule contains two atoms of mass 22 u, giving a molecular mass of 44 u.
Thus, the molar masses are numerically 40 and \(44\,\mathrm{g\,mol^{-1}}\), respectively.
The sample masses are
\[
m_P=0.50(40)=20.0\,\text{g}
\]
\[
m_Q=0.50(44)=22.0\,\text{g}
\]
The Q sample is therefore 2.0 g heavier.
The result illustrates why equal gaseous volumes under identical conditions imply equal molecule counts, not necessarily equal masses.
It also distinguishes molecular formula from isotopic mass.
Option C is correct.
384. A reaction is represented by
\[
\mathrm{2A(g)+B(g)\rightarrow2C(g)}
\]
A rigid vessel initially contains \(0.40\,\mathrm{mol}\) A, \(0.30\,\mathrm{mol}\) B and \(0.20\,\mathrm{mol}\) inert gas D. At constant temperature, the total pressure falls to \(\frac79\) of its initial value. Assume ideal-gas behaviour and that no other reaction occurs.
What are the amount of C formed and the mole fraction of B in the observed final mixture?
ⓐ. \(0.20\,\mathrm{mol}\) C and \(\dfrac27\) B
ⓑ. \(0.40\,\mathrm{mol}\) C and \(\dfrac17\) B
ⓒ. \(0.40\,\mathrm{mol}\) C and \(\dfrac27\) B
ⓓ. \(0.20\,\mathrm{mol}\) C and \(\dfrac17\) B
Correct Answer: \(0.40\,\mathrm{mol}\) C and \(\dfrac17\) B
Explanation: \(\textbf{Converting the pressure observation into molecular amount:}\)
The vessel volume and temperature remain constant.
Therefore, the total gas pressure is proportional to the total amount of gas molecules.
Initially,
\[
n_i=0.40+0.30+0.20
\]
\[
n_i=0.90\,\mathrm{mol}
\]
The observed pressure ratio is
\[
\frac{P_f}{P_i}=\frac79
\]
Hence,
\[
n_f=\frac79(0.90)
\]
\[
n_f=0.70\,\mathrm{mol}
\]
\(\textbf{Relating the pressure change to reaction extent:}\)
The equation consumes three gaseous molecular quantities and forms two.
Thus, each stoichiometric reaction unit decreases the total gaseous amount by one mole.
Let \(x\) denote the amount of B consumed.
The corresponding amounts are
\[
n_{\mathrm{A,consumed}}=2x
\]
\[
n_{\mathrm{C,formed}}=2x
\]
The final total amount is
\[
n_f=(0.40-2x)+(0.30-x)+2x+0.20
\]
Simplifying,
\[
n_f=0.90-x
\]
Substituting the pressure-derived value,
\[
0.70=0.90-x
\]
\[
x=0.20\,\mathrm{mol}
\]
\(\textbf{Recovering the product amount:}\)
\[
n_C=2x
\]
\[
n_C=2(0.20)
\]
\[
n_C=0.40\,\mathrm{mol}
\]
\(\textbf{Reconstructing the observed final mixture:}\)
The amount of A remaining is
\[
n_{\mathrm{A,remaining}}=0.40-2(0.20)=0
\]
The amount of B remaining is
\[
n_{\mathrm{B,remaining}}=0.30-0.20
\]
\[
n_{\mathrm{B,remaining}}=0.10\,\mathrm{mol}
\]
The inert D amount remains \(0.20\,\mathrm{mol}\).
Therefore, the final gas amounts are 0.40 mol C, 0.10 mol B and 0.20 mol D.
Their total is
\[
0.40+0.10+0.20=0.70\,\mathrm{mol}
\]
\(\textbf{Calculating the final B mole fraction:}\)
\[
X_B=\frac{0.10}{0.70}
\]
\[
X_B=\frac17
\]
\(\textbf{Evaluating the reported options:}\)
The correctly derived pair is \(0.40\,\mathrm{mol}\) C and \(\frac17\) B.
This corresponds to Option B.
The inert gas changes the total pressure and mole-fraction denominator but does not alter reaction stoichiometry.
The pressure change reveals the actual reaction extent because the net change in gaseous molecular amount is known.
\(\textbf{Final answer:}\)
\[
\boxed{n_C=0.40\,\mathrm{mol},\quad X_B=\frac17}
\]
385. A solid sample consists of a pure carbonate, \(\mathrm{MCO_3}\), and an inert impurity. On complete heating, the carbonate forms \(\mathrm{MO}\) and carbon dioxide:
\[
\mathrm{MCO_3(s)\rightarrow MO(s)+CO_2(g)}
\]
A 25.0 g sample loses 8.8 g during heating. The remaining solid contains exactly 8.0 g of oxygen atoms in total. The impurity contains no oxygen and remains unchanged. Which conclusion follows from the two measurements? (Atomic masses: C = 12, O = 16)
ⓐ. The measurements are consistent; \(M=24\,\mathrm{u}\) and the carbonate content is \(67.2\%\).
ⓑ. The measurements are consistent; \(M=40\,\mathrm{u}\) and the carbonate content is \(67.2\%\).
ⓒ. The measurements are inconsistent; the predicted residue oxygen mass is \(4.0\,\mathrm{g}\).
ⓓ. The measurements are inconsistent; the predicted residue oxygen mass is \(3.2\,\mathrm{g}\).
Correct Answer: The measurements are inconsistent; the predicted residue oxygen mass is \(3.2\,\mathrm{g}\).
Explanation: \(\textbf{Recovering the decomposed carbonate amount:}\)
Only carbon dioxide escapes, so the observed mass loss equals its mass.
\[
m_{\mathrm{CO_2}}=8.8\,\text{g}
\]
\[
n_{\mathrm{CO_2}}=\frac{8.8}{44}
\]
\[
n_{\mathrm{CO_2}}=0.200\,\mathrm{mol}
\]
Each carbonate formula unit produces one carbon dioxide molecule.
Therefore,
\[
n_{\mathrm{MCO_3}}=0.200\,\mathrm{mol}
\]
\(\textbf{Determining oxygen retained in the oxide:}\)
Each mole of carbonate forms one mole of MO.
The oxide amount is
\[
n_{\mathrm{MO}}=0.200\,\mathrm{mol}
\]
Each MO formula unit contains one oxygen atom.
Thus, the oxygen amount retained in the oxide is
\[
n_{O,\mathrm{oxide}}=0.200\,\mathrm{mol}
\]
Its mass is
\[
m_{O,\mathrm{oxide}}=0.200(16)
\]
\[
m_{O,\mathrm{oxide}}=3.2\,\text{g}
\]
\(\textbf{Testing the stated oxygen measurement:}\)
The impurity is explicitly described as oxygen-free and unchanged.
Therefore, all oxygen atoms remaining in the solid must belong to MO.
The measured solid oxygen mass is stated to be 8.0 g.
However, the carbonate decomposition stoichiometry predicts only 3.2 g.
\(\textbf{Establishing the contradiction:}\)
The 8.8 g carbon dioxide loss fixes the decomposed carbonate amount at \(0.200\,\mathrm{mol}\).
That amount can form only \(0.200\,\mathrm{mol}\) MO, containing 3.2 g oxygen.
Neither the identity nor atomic mass of M can change this oxygen-to-carbonate relationship.
The impurity cannot supply extra oxygen under the stated conditions because it is oxygen-free and remains unchanged.
\(\textbf{Final conclusion:}\)
The two measurements are mutually inconsistent because 0.200 mol of oxide can retain only 3.2 g of oxygen under the stated conditions.
This oxygen-balance contradiction cannot be removed by changing the atomic mass of M or the amount of inert impurity.
An independent composition measurement would be required before the metal atomic mass or carbonate percentage could be determined.
386. Consider two experiments involving pure molecular substances.
Experiment P: A 10 g sample of substance X is separated physically into two portions, each retaining the same elemental mass percentages as the original sample.
Experiment Q: A 10 g sample of substance Y reacts chemically, forming two different products whose combined mass is 10 g.
Which statement correctly identifies what these observations establish?
ⓐ. P proves that X is a pure compound, and Q proves that its products have the same formula as Y.
ⓑ. P proves the law of multiple proportions, and Q proves Avogadro's law.
ⓒ. P does not alone prove purity; Q supports mass conservation without fixing the product formulae.
ⓓ. Both observations independently establish that every original molecule survives unchanged.
Correct Answer: P does not alone prove purity; Q supports mass conservation without fixing the product formulae.
Explanation: Experiment P shows that separating the original sample into portions does not change its measured bulk elemental composition.
This is consistent with the behaviour of a pure compound, which has a fixed elemental composition.
However, a homogeneous mixture may also yield portions of identical bulk composition under an ordinary physical subdivision.
The measurement therefore does not uniquely establish purity.
Experiment Q concerns a chemical reaction.
The combined product mass equals the original reactant mass.
This is consistent with conservation of mass when all products are accounted for.
The result alone does not specify how the constituent atoms are distributed among the two products.
Consequently, it does not determine their molecular formulae.
Neither experiment directly compares the combining masses of different compounds formed from the same pair of elements, as required for a test of multiple proportions.
Neither experiment compares gaseous volumes and particle counts under controlled temperature-pressure conditions, so Avogadro's law is not the relevant primary observation.
A chemical reaction may rearrange atoms into new molecular species.
The original molecules need not survive unchanged.
The correct interpretation separates the evidential limits of fixed-composition measurements from those of overall mass-balance measurements.
Both observations are scientifically meaningful, but neither supports the stronger unsupported conclusions in the other options.
387. A pure molecular compound contains nitrogen and oxygen only. A \(9.2\,\mathrm{g}\) sample contains \(0.20\,\mathrm{mol}\) of nitrogen atoms and \(0.40\,\mathrm{mol}\) of oxygen atoms. Its experimentally measured molecular molar mass is \(92\,\mathrm{g\,mol^{-1}}\).
Which pair correctly identifies the molecular formula and the number of nitrogen atoms in one molecule? (Atomic masses: N = 14, O = 16)
ⓐ. \(\mathrm{NO_2}\); one nitrogen atom
ⓑ. \(\mathrm{N_4O_8}\); four nitrogen atoms
ⓒ. \(\mathrm{N_2O_3}\); two nitrogen atoms
ⓓ. \(\mathrm{N_2O_4}\); two nitrogen atoms
Correct Answer: \(\mathrm{N_2O_4}\); two nitrogen atoms
Explanation: \(\textbf{Establishing the empirical atomic ratio:}\)
The measured constituent atomic amounts are
\[
n_N=0.20\,\mathrm{mol}
\]
\[
n_O=0.40\,\mathrm{mol}
\]
Their ratio is
\[
N:O=0.20:0.40
\]
\[
N:O=1:2
\]
Therefore, the empirical formula is \(\mathrm{NO_2}\).
\(\textbf{Calculating the empirical formula mass:}\)
\[
M_{\mathrm{NO_2}}=14+2(16)
\]
\[
M_{\mathrm{NO_2}}=46\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Determining the molecular multiplier:}\)
The measured molecular molar mass is \(92\,\mathrm{g\,mol^{-1}}\).
\[
k=\frac{M_{\mathrm{molecular}}}{M_{\mathrm{empirical}}}
\]
\[
k=\frac{92}{46}
\]
\[
k=2
\]
Multiplying the empirical subscripts by two gives
\[
\mathrm{N_2O_4}
\]
\(\textbf{Checking the molecule amount independently:}\)
The supplied sample mass is 9.2 g.
\[
n_{\mathrm{molecules}}=\frac{9.2}{92}
\]
\[
n_{\mathrm{molecules}}=0.100\,\mathrm{mol}
\]
The molecular formula predicts
\[
n_N=2(0.100)=0.200\,\mathrm{mol}
\]
and
\[
n_O=4(0.100)=0.400\,\mathrm{mol}
\]
Both match the measured atomic inventories.
\(\textbf{Distinguishing empirical and molecular formulae:}\)
The empirical formula gives only the simplest atomic ratio.
The molecular formula specifies the actual numbers of nitrogen and oxygen atoms per molecule.
The independent molecular molar mass selects the multiplier and therefore establishes the molecular formula uniquely.
Every \(\mathrm{N_2O_4}\) molecule contains two nitrogen atoms, rather than the one nitrogen atom shown by the empirical formula.
\(\textbf{Final answer:}\)
\[
\boxed{\mathrm{N_2O_4},\quad 2\text{ nitrogen atoms per molecule}}
\]
388. A compound contains only carbon, hydrogen and oxygen. Its percentage composition is 40.0% carbon, 6.67% hydrogen and 53.33% oxygen by mass. Two independent measurements are reported:
Measurement I: Its molar mass is \(90\,\mathrm{g\,mol^{-1}}\).
Measurement II: Every molecule contains eight constituent atoms.
Which conclusion is correct? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. Both measurements are consistent with molecular formula \(\mathrm{C_3H_6O_3}\).
ⓑ. Measurement I is consistent with the composition, but Measurement II is inconsistent.
ⓒ. Measurement II is consistent with molecular formula \(\mathrm{C_2H_4O_2}\), but Measurement I is inconsistent.
ⓓ. Both measurements are inconsistent with the composition.
Correct Answer: Measurement I is consistent with the composition, but Measurement II is inconsistent.
Explanation: \(\textbf{Recovering the empirical formula:}\)
Take a 100 g basis.
The corresponding elemental atomic amounts are
\[
n_C=\frac{40.0}{12}\approx3.333\,\mathrm{mol}
\]
\[
n_H=\frac{6.67}{1}\approx6.67\,\mathrm{mol}
\]
\[
n_O=\frac{53.33}{16}\approx3.333\,\mathrm{mol}
\]
Dividing by the smallest amount gives approximately
\[
C:H:O=1:2:1
\]
The empirical formula is \(\mathrm{CH_2O}\).
\(\textbf{Determining the empirical formula mass:}\)
\[
M_{\mathrm{emp}}=12+2(1)+16
\]
\[
M_{\mathrm{emp}}=30\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Testing Measurement I:}\)
The reported molar mass is \(90\,\mathrm{g\,mol^{-1}}\).
\[
k=\frac{90}{30}=3
\]
The corresponding molecular formula is
\[
\mathrm{C_3H_6O_3}
\]
This formula is compatible with the reported percentages.
Therefore, Measurement I is consistent.
\(\textbf{Testing Measurement II:}\)
One empirical unit, \(\mathrm{CH_2O}\), contains
\[
a_{\mathrm{emp}}=1+2+1=4
\]
constituent atoms.
Every permissible molecular formula is a positive whole-number multiple of this empirical formula.
Therefore, its total atomicity must be a positive multiple of four.
Eight constituent atoms would require
\[
k=\frac84=2
\]
giving molecular formula
\[
\mathrm{C_2H_4O_2}
\]
Its molar mass would be
\[
M=2(30)=60\,\mathrm{g\,mol^{-1}}
\]
This differs from Measurement I's 90 g mol\(^{-1}\).
\(\textbf{Identifying the incompatibility:}\)
Measurement I requires three empirical units per molecule, containing twelve atoms altogether.
Measurement II requires two empirical units per molecule, containing eight atoms altogether.
Both cannot describe the same pure molecular compound.
The percentage-composition data themselves are compatible with either molecular multiplier separately.
The contradiction lies between the two additional measurements.
The defensible conclusion is that Measurement I is compatible with the composition but inconsistent with the stated eight-atom molecular count.
389. A chemist is given a 20.0 g mixture containing only two pure solids, \(\mathrm{CaCO_3}\) and \(\mathrm{MgCO_3}\). The sample is heated until both carbonates decompose completely into their corresponding oxides and carbon dioxide. Exactly 9.24 g of carbon dioxide escapes.
What was the original mass percentage of calcium carbonate? (Atomic masses: Ca = 40, Mg = 24, C = 12, O = 16)
ⓐ. \(40\%\)
ⓑ. \(50\%\)
ⓒ. \(73.75\%\)
ⓓ. \(70\%\)
Correct Answer: \(73.75\%\)
Explanation: \(\textbf{Identifying the common gas-producing relationship:}\)
Both metal carbonates decompose to produce one mole of carbon dioxide per mole of carbonate formula units.
However, their molar masses are different.
Therefore, equal masses of the two carbonates would not produce equal amounts of carbon dioxide.
\(\textbf{Establishing the component molar masses:}\)
\[
M_{\mathrm{CaCO_3}}=40+12+3(16)
\]
\[
M_{\mathrm{CaCO_3}}=100\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{MgCO_3}}=24+12+3(16)
\]
\[
M_{\mathrm{MgCO_3}}=84\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Representing the unknown solid masses:}\)
Let \(x\) grams be calcium carbonate.
The magnesium carbonate mass is then \(20.0-x\) grams.
The corresponding formula-unit amounts are
\[
n_{\mathrm{CaCO_3}}=\frac{x}{100}
\]
\[
n_{\mathrm{MgCO_3}}=\frac{20.0-x}{84}
\]
\(\textbf{Using the total carbon dioxide collected:}\)
The carbon dioxide amount is
\[
n_{\mathrm{CO_2}}=\frac{9.24}{44}
\]
\[
n_{\mathrm{CO_2}}=0.210\,\mathrm{mol}
\]
Therefore,
\[
\frac{x}{100}+\frac{20.0-x}{84}=0.210
\]
\(\textbf{Solving the composition equation:}\)
Multiplying by 2100,
\[
21x+25(20.0-x)=441
\]
\[
21x+500-25x=441
\]
\[
4x=59
\]
\[
x=14.75\,\text{g}
\]
\(\textbf{Determining calcium carbonate percentage:}\)
\[
\%\mathrm{CaCO_3}=\frac{14.75}{20.0}\times100
\]
\[
\%\mathrm{CaCO_3}=73.75\%
\]
\(\textbf{Independent consistency check:}\)
The magnesium carbonate mass is
\[
m_{\mathrm{MgCO_3}}=20.0-14.75
\]
\[
m_{\mathrm{MgCO_3}}=5.25\,\text{g}
\]
The corresponding carbonate amounts are
\[
n_{\mathrm{CaCO_3}}=\frac{14.75}{100}=0.1475\,\mathrm{mol}
\]
\[
n_{\mathrm{MgCO_3}}=\frac{5.25}{84}=0.0625\,\mathrm{mol}
\]
Their total is
\[
0.1475+0.0625=0.2100\,\mathrm{mol}
\]
The predicted carbon dioxide mass is \(0.2100(44)=9.24\) g, as measured.
\(\textbf{Final answer:}\)
\[
\boxed{\%\mathrm{CaCO_3}=73.75\%}
\]
390. A reaction between two hypothetical gaseous elements occurs according to
\[
\mathrm{A_2(g)+B_2(g)\rightarrow2AB(g)}
\]
A sealed rigid vessel initially contains \(0.20\,\mathrm{mol}\) of \(\mathrm{A_2}\), \(0.30\,\mathrm{mol}\) of \(\mathrm{B_2}\) and \(0.10\,\mathrm{mol}\) of inert monatomic gas C. The reaction proceeds until all \(\mathrm{A_2}\) is consumed. Temperature and volume remain constant, and all gases behave ideally.
Which pair correctly gives the ratio of final to initial pressure and the fraction of all final constituent atoms belonging to element C?
ⓐ. \(1:1\) and \(\dfrac1{11}\)
ⓑ. \(5:6\) and \(\dfrac1{11}\)
ⓒ. \(1:1\) and \(\dfrac16\)
ⓓ. \(5:6\) and \(\dfrac16\)
Correct Answer: \(1:1\) and \(\dfrac1{11}\)
Explanation: \(\textbf{Reconstructing the reacting amounts:}\)
The balanced equation requires equal mole amounts of \(\mathrm{A_2}\) and \(\mathrm{B_2}\).
The available amounts are
\[
n_{\mathrm{A_2}}=0.20\,\mathrm{mol}
\]
\[
n_{\mathrm{B_2}}=0.30\,\mathrm{mol}
\]
Therefore, \(\mathrm{A_2}\) is limiting.
It consumes
\[
n_{\mathrm{B_2,consumed}}=0.20\,\mathrm{mol}
\]
The unreacted \(\mathrm{B_2}\) amount is
\[
n_{\mathrm{B_2,remaining}}=0.30-0.20
\]
\[
n_{\mathrm{B_2,remaining}}=0.10\,\mathrm{mol}
\]
\(\textbf{Determining the product amount:}\)
One mole of \(\mathrm{A_2}\) forms two moles of AB.
\[
n_{\mathrm{AB}}=2(0.20)
\]
\[
n_{\mathrm{AB}}=0.40\,\mathrm{mol}
\]
The inert C amount remains \(0.10\,\mathrm{mol}\).
\(\textbf{Comparing the initial and final gas amounts:}\)
Initially,
\[
n_i=0.20+0.30+0.10
\]
\[
n_i=0.60\,\mathrm{mol}
\]
Finally,
\[
n_f=0.40+0.10+0.10
\]
\[
n_f=0.60\,\mathrm{mol}
\]
At fixed temperature and volume,
\[
\frac{P_f}{P_i}=\frac{n_f}{n_i}
\]
\[
\frac{P_f}{P_i}=\frac{0.60}{0.60}=1
\]
Thus,
\[
P_f:P_i=1:1
\]
\(\textbf{Counting all final constituent atoms:}\)
Each AB molecule contains two atoms.
The amount of atoms in AB is
\[
n_{\mathrm{atoms,AB}}=2(0.40)
\]
\[
n_{\mathrm{atoms,AB}}=0.80\,\mathrm{mol}
\]
Each unreacted \(\mathrm{B_2}\) molecule also contains two atoms.
\[
n_{\mathrm{atoms,B_2}}=2(0.10)
\]
\[
n_{\mathrm{atoms,B_2}}=0.20\,\mathrm{mol}
\]
The inert gas C is monatomic.
It contributes
\[
n_{\mathrm{atoms,C}}=0.10\,\mathrm{mol}
\]
The total atomic amount is
\[
n_{\mathrm{atoms,total}}=0.80+0.20+0.10
\]
\[
n_{\mathrm{atoms,total}}=1.10\,\mathrm{mol}
\]
\(\textbf{Determining the C-atom fraction:}\)
\[
f_C=\frac{0.10}{1.10}
\]
\[
f_C=\frac1{11}
\]
\(\textbf{Independent atomic-inventory check:}\)
The initial A-atom amount is \(2(0.20)=0.40\,\mathrm{mol}\).
The initial B-atom amount is \(2(0.30)=0.60\,\mathrm{mol}\).
The inert C contributes \(0.10\,\mathrm{mol}\) atoms.
The sum is 1.10 mol of constituent atoms, equal to the final amount.
The gas pressure remains unchanged because the reaction converts two reacting gaseous molecules into two product molecules.
The fraction of C atoms, however, must be calculated relative to all constituent atoms rather than the total number of gas molecules.
\(\textbf{Final answer:}\)
\[
\boxed{P_f:P_i=1:1,\quad f_C=\frac1{11}}
\]
391. A non-reacting gaseous mixture contains only NO, \(\mathrm{NO_2}\) and \(\mathrm{N_2O}\). The total amount of gas molecules is \(0.50\,\mathrm{mol}\). Independent measurements show that the mixture contains \(0.60\,\mathrm{mol}\) of nitrogen atoms and \(0.55\,\mathrm{mol}\) of oxygen atoms. What are the mole fraction of NO and the total mass of the mixture? (Atomic masses: N = 14, O = 16)
ⓐ. \(0.70\) and 17.2 g
ⓑ. \(0.70\) and 18.8 g
ⓒ. \(0.60\) and 17.2 g
ⓓ. \(0.60\) and 18.8 g
Correct Answer: \(0.70\) and 17.2 g
Explanation: \(\textbf{Representing the three molecular populations:}\)
Let the mole amounts of NO, \(\mathrm{NO_2}\) and \(\mathrm{N_2O}\) be \(x\), \(y\) and \(z\), respectively.
Their combined molecular amount gives
\[
x+y+z=0.50 \qquad (1)
\]
\(\textbf{Using nitrogen atoms to identify the distinctive species:}\)
Each NO and \(\mathrm{NO_2}\) molecule contains one nitrogen atom.
Each \(\mathrm{N_2O}\) molecule contains two nitrogen atoms.
Therefore,
\[
x+y+2z=0.60 \qquad (2)
\]
Subtracting Equation (1) from Equation (2),
\[
z=0.60-0.50
\]
\[
z=0.10\,\mathrm{mol}
\]
The remaining two gases together amount to
\[
x+y=0.50-0.10
\]
\[
x+y=0.40\,\mathrm{mol}
\]
\(\textbf{Resolving NO and nitrogen dioxide using oxygen atoms:}\)
NO contains one oxygen atom, nitrogen dioxide contains two and dinitrogen monoxide contains one.
The oxygen-atom measurement gives
\[
x+2y+z=0.55
\]
Substituting \(z=0.10\),
\[
x+2y=0.45 \qquad (3)
\]
Subtracting \(x+y=0.40\),
\[
y=0.05\,\mathrm{mol}
\]
Thus,
\[
x=0.40-0.05
\]
\[
x=0.35\,\mathrm{mol}
\]
\(\textbf{Determining the NO mole fraction:}\)
\[
X_{\mathrm{NO}}=\frac{0.35}{0.50}
\]
\[
X_{\mathrm{NO}}=0.70
\]
\(\textbf{Calculating the mixture mass:}\)
The molar masses of NO, nitrogen dioxide and dinitrogen monoxide are 30, 46 and \(44\,\mathrm{g\,mol^{-1}}\), respectively.
\[
m_{\mathrm{total}}=0.35(30)+0.05(46)+0.10(44)
\]
\[
m_{\mathrm{total}}=10.5+2.3+4.4
\]
\[
m_{\mathrm{total}}=17.2\,\text{g}
\]
\(\textbf{Checking all independent measurements:}\)
The recovered molecular amounts sum to \(0.50\,\mathrm{mol}\).
Their nitrogen-atom amount is
\[
0.35+0.05+2(0.10)=0.60\,\mathrm{mol}
\]
Their oxygen-atom amount is
\[
0.35+2(0.05)+0.10=0.55\,\mathrm{mol}
\]
Both measured atomic inventories are reproduced.
The three constraints determine the three component amounts because the molecular species have different elemental atom-count patterns.
The atom-count measurements are therefore informative in a way that the total molecular amount alone is not.
\(\textbf{Final answer:}\)
\[
\boxed{X_{\mathrm{NO}}=0.70,\quad m_{\mathrm{total}}=17.2\,\text{g}}
\]
392. A hypothetical element X has only two isotopes, of masses 10 u and 12 u. In a particular sample, 60% of the total elemental mass is contributed by the heavier isotope. The element forms a compound with formula XO, using oxygen atoms of mass 16 u. Assume that oxide formation does not change the isotopic composition of X. What percentage of X atoms in the original sample are heavier-isotope atoms, and what mass of XO corresponds to \(0.54\,\mathrm{mol}\) of its formula units?
ⓐ. \(60.00\%\) and 15.12 g
ⓑ. \(60.00\%\) and 14.64 g
ⓒ. \(55.56\%\) and 15.12 g
ⓓ. \(55.56\%\) and 14.64 g
Correct Answer: \(55.56\%\) and 14.64 g
Explanation: \(\textbf{Distinguishing mass abundance from atomic abundance:}\)
The reported 60% is a percentage of total isotope mass.
It is not the percentage of atoms belonging to the heavier isotope.
Because a heavier isotope contributes more mass per atom, mass fractions must first be converted into atomic amounts.
\(\textbf{Choosing a convenient total-mass basis:}\)
Take 60 g of elemental X.
The heavier isotope contributes
\[
m_{12}=0.60(60)
\]
\[
m_{12}=36\,\text{g}
\]
The lighter isotope contributes
\[
m_{10}=60-36
\]
\[
m_{10}=24\,\text{g}
\]
\(\textbf{Converting isotope masses into atomic amounts:}\)
For the heavier isotope,
\[
n_{12}=\frac{36}{12}
\]
\[
n_{12}=3.0\,\mathrm{mol}
\]
For the lighter isotope,
\[
n_{10}=\frac{24}{10}
\]
\[
n_{10}=2.4\,\mathrm{mol}
\]
Thus,
\[
n_{X,\mathrm{total}}=3.0+2.4
\]
\[
n_{X,\mathrm{total}}=5.4\,\mathrm{mol}
\]
\(\textbf{Calculating the heavier-isotope atom percentage:}\)
\[
f_{12}=\frac{3.0}{5.4}
\]
\[
f_{12}=\frac59
\]
Therefore,
\[
\%\,^{12}\mathrm{X}=\frac59(100)
\]
\[
\%\,^{12}\mathrm{X}\approx55.56\%
\]
\(\textbf{Recovering the average atomic mass:}\)
The selected 60 g sample contains \(5.4\,\mathrm{mol}\) of atoms.
\[
\overline{M}_X=\frac{60}{5.4}
\]
\[
\overline{M}_X=\frac{100}{9}\,\mathrm{g\,mol^{-1}}
\]
The corresponding average atomic mass is approximately \(11.111\,\mathrm{u}\).
\(\textbf{Transferring the isotope composition to the oxide:}\)
Each XO formula unit contains one X atom and one oxygen atom.
Its molar mass is
\[
M_{\mathrm{XO}}=\frac{100}{9}+16
\]
\[
M_{\mathrm{XO}}=\frac{244}{9}\,\mathrm{g\,mol^{-1}}
\]
For \(0.54\,\mathrm{mol}\) oxide,
\[
m_{\mathrm{XO}}=0.54\left(\frac{244}{9}\right)
\]
\[
m_{\mathrm{XO}}=14.64\,\text{g}
\]
\(\textbf{Physical interpretation:}\)
The heavier isotope supplies 60% of the original element's mass but only about 55.56% of its atoms.
The oxide mass depends on the atom-number-weighted average atomic mass of X, not directly on its heavier-isotope mass percentage.
The result is consistent with preservation of the isotope distribution during compound formation.
\(\textbf{Final answer:}\)
\[
\boxed{\%\,^{12}\mathrm{X}\text{ atoms}=55.56\%,\quad m_{\mathrm{XO}}=14.64\,\text{g}}
\]
393. A rigid vessel initially contains \(0.30\,\mathrm{mol}\) of CO, \(0.20\,\mathrm{mol}\) of oxygen and \(0.50\,\mathrm{mol}\) of inert nitrogen. Carbon monoxide reacts completely to form carbon dioxide:
\[
\mathrm{2CO(g)+O_2(g)\rightarrow2CO_2(g)}
\]
The temperature and volume remain constant, all gases behave ideally, and no other reaction occurs. What are the ratio of final to initial pressure and the fraction of all final constituent atoms that are oxygen atoms?
ⓐ. \(0.85\) and \(0.70\)
ⓑ. \(0.85\) and \(0.35\)
ⓒ. \(0.70\) and \(0.35\)
ⓓ. \(0.70\) and \(0.50\)
Correct Answer: \(0.85\) and \(0.35\)
Explanation: \(\textbf{Identifying the stoichiometric oxygen requirement:}\)
Two moles of CO consume one mole of oxygen gas.
Complete oxidation of the initial CO requires
\[
n_{\mathrm{O_2,consumed}}=0.30\left(\frac12\right)
\]
\[
n_{\mathrm{O_2,consumed}}=0.15\,\mathrm{mol}
\]
The supplied oxygen amount is \(0.20\,\mathrm{mol}\).
Therefore, enough oxygen is available for complete oxidation.
\(\textbf{Reconstructing the final molecular species:}\)
The carbon dioxide formed is
\[
n_{\mathrm{CO_2}}=0.30\,\mathrm{mol}
\]
The unreacted oxygen is
\[
n_{\mathrm{O_2,remaining}}=0.20-0.15
\]
\[
n_{\mathrm{O_2,remaining}}=0.05\,\mathrm{mol}
\]
Nitrogen remains unchanged at \(0.50\,\mathrm{mol}\).
\(\textbf{Using molecular amount to determine pressure:}\)
The initial gas amount is
\[
n_i=0.30+0.20+0.50
\]
\[
n_i=1.00\,\mathrm{mol}
\]
The final gas amount is
\[
n_f=0.30+0.05+0.50
\]
\[
n_f=0.85\,\mathrm{mol}
\]
At constant temperature and volume,
\[
\frac{P_f}{P_i}=\frac{n_f}{n_i}
\]
\[
\frac{P_f}{P_i}=\frac{0.85}{1.00}=0.85
\]
\(\textbf{Counting final oxygen atoms:}\)
Carbon dioxide supplies two oxygen atoms per molecule.
Residual oxygen gas also supplies two oxygen atoms per molecule.
\[
n_{O,\mathrm{CO_2}}=2(0.30)=0.60\,\mathrm{mol}
\]
\[
n_{O,\mathrm{O_2}}=2(0.05)=0.10\,\mathrm{mol}
\]
Therefore,
\[
n_{O,\mathrm{total}}=0.70\,\mathrm{mol}
\]
\(\textbf{Counting all final constituent atoms:}\)
Carbon dioxide contributes three atoms per molecule, oxygen gas contributes two, and nitrogen gas contributes two.
\[
n_{\mathrm{atoms,total}}=3(0.30)+2(0.05)+2(0.50)
\]
\[
n_{\mathrm{atoms,total}}=0.90+0.10+1.00
\]
\[
n_{\mathrm{atoms,total}}=2.00\,\mathrm{mol}
\]
The oxygen-atom fraction is
\[
f_O=\frac{0.70}{2.00}
\]
\[
f_O=0.35
\]
\(\textbf{Independent atom-conservation check:}\)
Initially, CO and oxygen gas together contain \(0.30+2(0.20)=0.70\,\mathrm{mol}\) oxygen atoms.
This equals the final oxygen-atom amount.
The reaction reduces the number of gas molecules but preserves all constituent atoms.
The inert nitrogen affects both the total pressure and the denominator of the final atom fraction without participating chemically.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{P_f}{P_i}=0.85,\quad f_O=0.35}
\]
394. A pure molecular compound X contains only carbon, hydrogen and oxygen. The atom fractions of carbon, hydrogen and oxygen among all constituent atoms in one molecule are \(\frac38\), \(\frac12\) and \(\frac18\), respectively. Its molecular molar mass is \(112\,\mathrm{g\,mol^{-1}}\). When X undergoes complete combustion, the only products are carbon dioxide and water. How many moles of oxygen gas are required for the complete combustion of \(0.10\,\mathrm{mol}\) of X? (Atomic masses: C = 12, H = 1, O = 16)
ⓐ. \(0.60\,\mathrm{mol}\)
ⓑ. \(0.70\,\mathrm{mol}\)
ⓒ. \(0.80\,\mathrm{mol}\)
ⓓ. \(0.90\,\mathrm{mol}\)
Correct Answer: \(0.70\,\mathrm{mol}\)
Explanation: \(\textbf{Converting atom fractions into a formula ratio:}\)
Atom fractions represent the proportions of constituent atoms, not elemental mass fractions.
The given fractions are
\[
f_C:f_H:f_O=\frac38:\frac12:\frac18
\]
Multiplying throughout by eight gives
\[
C:H:O=3:4:1
\]
Thus, the empirical formula is \(\mathrm{C_3H_4O}\).
\(\textbf{Determining the empirical formula mass:}\)
\[
M_{\mathrm{emp}}=3(12)+4(1)+16
\]
\[
M_{\mathrm{emp}}=56\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Using the independently supplied molecular molar mass:}\)
\[
k=\frac{112}{56}
\]
\[
k=2
\]
The molecular formula of X is therefore
\[
\mathrm{C_6H_8O_2}
\]
\(\textbf{Balancing the combustion products:}\)
One molecule contains six carbon atoms.
Complete combustion consequently forms six carbon dioxide molecules per molecule of X.
The eight hydrogen atoms form four water molecules.
The reaction skeleton is
\[
\mathrm{C_6H_8O_2+O_2\rightarrow6CO_2+4H_2O}
\]
\(\textbf{Balancing the oxygen inventory:}\)
The products contain
\[
n_{O,\mathrm{products}}=6(2)+4(1)
\]
\[
n_{O,\mathrm{products}}=16
\]
oxygen atoms per reacting molecule of X.
The original molecule already contains two oxygen atoms.
The oxygen gas must therefore supply
\[
16-2=14
\]
oxygen atoms.
Since each oxygen molecule contains two atoms,
\[
\nu_{\mathrm{O_2}}=\frac{14}{2}=7
\]
The balanced equation is
\[
\mathrm{C_6H_8O_2+7O_2\rightarrow6CO_2+4H_2O}
\]
\(\textbf{Scaling to the specified molecular amount:}\)
\[
n_{\mathrm{O_2,required}}=7(0.10)
\]
\[
n_{\mathrm{O_2,required}}=0.70\,\mathrm{mol}
\]
\(\textbf{Chemical interpretation:}\)
The original oxygen atoms contained in X must be counted when balancing combustion.
Treating X as an oxygen-free hydrocarbon would overestimate the external oxygen requirement.
The atom fractions first determine an empirical formula; the molar mass then determines the molecular multiplier.
Only after reconstructing the molecular formula can its combustion equation be balanced.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{O_2,required}}=0.70\,\mathrm{mol}}
\]
395. Two preparations contain the same number of molecules of water. In Sample P, every hydrogen atom is protium of isotopic mass 1 u, and every oxygen atom has mass 16 u. In Sample Q, every hydrogen atom is deuterium of isotopic mass 2 u, and every oxygen atom again has mass 16 u. Consider the following statements.
Statement I: The hydrogen-isotope-to-oxygen atomic ratio is \(2:1\) in both samples.
Statement II: The mass percentage contributed by the hydrogen isotope is identical in the two samples because both have the elemental formula \(\mathrm{H_2O}\).
Statement III: Sample Q has a greater mass despite containing the same number of molecules as Sample P.
Statement IV: Different isotopic compositions can produce different precisely measured elemental mass percentages without changing the underlying elemental atom-number ratio.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and III only
ⓒ. I, III and IV only
ⓓ. I, II, III and IV
Correct Answer: I, III and IV only
Explanation: Statement I is correct because both preparations contain water molecules with two hydrogen nuclei and one oxygen nucleus.
Deuterium is an isotope of hydrogen, so replacing protium with deuterium does not change the elemental hydrogen-to-oxygen atomic ratio.
Statement II is incorrect because the two hydrogen isotopes have different masses.
For Sample P, the molecular mass is \(2(1)+16=18\,\mathrm{u}\), and hydrogen contributes \(2\,\mathrm{u}\).
Its hydrogen mass fraction is therefore \(2/18\), approximately 11.11%.
For Sample Q, the molecular mass is \(2(2)+16=20\,\mathrm{u}\), and the hydrogen isotopes contribute \(4\,\mathrm{u}\).
Its corresponding hydrogen-isotope mass fraction is \(4/20=20\%\).
Statement III is correct because equal molecule counts combined with greater mass per molecule give greater total mass.
Each molecule of Q is 2 u heavier than each molecule of P.
Statement IV is correct because isotope substitution changes atomic masses without changing the number of atoms of each element in the formula.
A comparison of precisely measured mass percentages must therefore account for the isotope distributions when they differ significantly.
This does not imply that ordinary chemical combination permits arbitrary numbers of hydrogen or oxygen atoms within a water molecule.
The molecular atom-number ratio remains fixed in both samples.
The important distinction is between fixed elemental atomic composition and isotope-dependent mass composition.
Statements I, III and IV are correct.
396. Nitrogen dioxide undergoes dimerisation according to
\[
\mathrm{2NO_2(g)\rightarrow N_2O_4(g)}
\]
A rigid vessel initially contains \(1.00\,\mathrm{mol}\) of pure nitrogen dioxide. At a particular stage, the pressure is 80% of its initial value. Temperature and volume remain constant, all gases behave ideally, and no other reaction occurs. What percentage of the initial nitrogen dioxide molecules has dimerised, and what is the mole fraction of \(\mathrm{N_2O_4}\) in the observed gas mixture?
ⓐ. \(20\%\) and \(0.20\)
ⓑ. \(60\%\) and \(0.25\)
ⓒ. \(40\%\) and \(0.40\)
ⓓ. \(40\%\) and \(0.25\)
Correct Answer: \(40\%\) and \(0.25\)
Explanation: \(\textbf{Translating pressure into a molecular-count constraint:}\)
At constant temperature and volume, ideal-gas pressure is proportional to total gaseous amount.
Initially,
\[
n_i=1.00\,\mathrm{mol}
\]
The measured pressure ratio gives
\[
\frac{P_f}{P_i}=\frac{n_f}{n_i}=0.80
\]
Therefore,
\[
n_f=0.80(1.00)
\]
\[
n_f=0.80\,\mathrm{mol}
\]
\(\textbf{Relating dimer formation to gas-particle reduction:}\)
Every two NO₂ molecules form one \(\mathrm{N_2O_4}\) molecule.
Thus, forming one mole of dimers decreases the total gaseous amount by one mole.
Let \(x\) be the amount of \(\mathrm{N_2O_4}\) formed.
Then the remaining nitrogen dioxide amount is
\[
n_{\mathrm{NO_2}}=1.00-2x
\]
The final gaseous amount is
\[
n_f=(1.00-2x)+x
\]
\[
n_f=1.00-x
\]
Using the measured amount,
\[
0.80=1.00-x
\]
\[
x=0.20\,\mathrm{mol}
\]
\(\textbf{Recovering the dimerised nitrogen dioxide:}\)
Two moles of nitrogen dioxide are consumed for each mole of dimer formed.
\[
n_{\mathrm{NO_2,consumed}}=2(0.20)
\]
\[
n_{\mathrm{NO_2,consumed}}=0.40\,\mathrm{mol}
\]
The fraction of initial NO₂ molecules that dimerised is
\[
f_{\mathrm{dimerised}}=\frac{0.40}{1.00}
\]
\[
f_{\mathrm{dimerised}}=0.40
\]
Therefore, 40% of the original molecules have dimerised.
\(\textbf{Determining the observed gas composition:}\)
The remaining NO₂ amount is
\[
n_{\mathrm{NO_2}}=1.00-0.40
\]
\[
n_{\mathrm{NO_2}}=0.60\,\mathrm{mol}
\]
The dimer amount is \(0.20\,\mathrm{mol}\).
Their combined amount is \(0.80\,\mathrm{mol}\), consistent with the pressure.
\(\textbf{Calculating the dimer mole fraction:}\)
\[
X_{\mathrm{N_2O_4}}=\frac{0.20}{0.80}
\]
\[
X_{\mathrm{N_2O_4}}=0.25
\]
\(\textbf{Distinguishing molecular disappearance from atomic conservation:}\)
The decrease in pressure reflects a decrease in the number of gaseous molecular entities.
Each dimer contains exactly the atoms of two original nitrogen dioxide molecules.
Consequently, total nitrogen atoms, oxygen atoms and gas mass remain conserved.
The fraction of NO₂ molecules consumed is not the same as the final mole fraction of the dimers.
\(\textbf{Final answer:}\)
\[
\boxed{\%\mathrm{NO_2\ dimerised}=40\%,\quad X_{\mathrm{N_2O_4}}=0.25}
\]
397. An aqueous mixture initially contains \(0.30\,\mathrm{mol}\) of formula units consisting only of NaCl and \(\mathrm{Na_2SO_4}\). The mixture is dissolved completely. Exactly \(0.12\,\mathrm{mol}\) of \(\mathrm{BaCl_2}\) is then added, producing \(0.10\,\mathrm{mol}\) of pure \(\mathrm{BaSO_4}\) precipitate:
\[
\mathrm{Na_2SO_4(aq)+BaCl_2(aq)\rightarrow BaSO_4(s)+2NaCl(aq)}
\]
Assume complete precipitation of sulphate ions, complete dissociation of the remaining soluble salts, and no other reactions. What was the original mass of the NaCl–\(\mathrm{Na_2SO_4}\) mixture, and what is the total amount of independently dispersed dissolved ions after precipitation? (Atomic masses: Na = 23, Cl = 35.5, S = 32, O = 16)
ⓐ. 25.9 g and \(0.84\,\mathrm{mol}\)
ⓑ. 25.9 g and \(0.86\,\mathrm{mol}\)
ⓒ. 28.4 g and \(0.86\,\mathrm{mol}\)
ⓓ. 28.4 g and \(0.84\,\mathrm{mol}\)
Correct Answer: 25.9 g and \(0.86\,\mathrm{mol}\)
Explanation: \(\textbf{Recovering the initial sulphate amount:}\)
The balanced precipitation equation has a \(1:1\) mole relationship between sodium sulphate and barium sulphate.
The observed precipitate amount is \(0.10\,\mathrm{mol}\).
Since precipitation is complete,
\[
n_{\mathrm{Na_2SO_4,initial}}=0.10\,\mathrm{mol}
\]
\(\textbf{Determining the original sodium chloride amount:}\)
The two original salts together contribute \(0.30\,\mathrm{mol}\) of formula units.
Therefore,
\[
n_{\mathrm{NaCl,initial}}=0.30-0.10
\]
\[
n_{\mathrm{NaCl,initial}}=0.20\,\mathrm{mol}
\]
\(\textbf{Calculating the original mixture mass:}\)
\[
M_{\mathrm{NaCl}}=23+35.5=58.5\,\mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{Na_2SO_4}}=2(23)+32+4(16)
\]
\[
M_{\mathrm{Na_2SO_4}}=142\,\mathrm{g\,mol^{-1}}
\]
The original component masses are
\[
m_{\mathrm{NaCl}}=0.20(58.5)=11.7\,\text{g}
\]
\[
m_{\mathrm{Na_2SO_4}}=0.10(142)=14.2\,\text{g}
\]
Thus,
\[
m_{\mathrm{original}}=11.7+14.2
\]
\[
m_{\mathrm{original}}=25.9\,\text{g}
\]
\(\textbf{Identifying dissolved ions after precipitation:}\)
The original NaCl contributes \(0.20\,\mathrm{mol}\) sodium ions and \(0.20\,\mathrm{mol}\) chloride ions.
The sodium sulphate contributes \(2(0.10)=0.20\,\mathrm{mol}\) sodium ions.
All these sodium ions remain dissolved.
\[
n_{\mathrm{Na^+}}=0.20+0.20
\]
\[
n_{\mathrm{Na^+}}=0.40\,\mathrm{mol}
\]
\(\textbf{Counting chloride introduced with barium chloride:}\)
The added barium chloride amount is \(0.12\,\mathrm{mol}\).
It introduces
\[
n_{\mathrm{Cl^-,added}}=2(0.12)
\]
\[
n_{\mathrm{Cl^-,added}}=0.24\,\mathrm{mol}
\]
No chloride is incorporated into the barium sulphate precipitate.
Therefore,
\[
n_{\mathrm{Cl^-,final}}=0.20+0.24
\]
\[
n_{\mathrm{Cl^-,final}}=0.44\,\mathrm{mol}
\]
\(\textbf{Counting excess barium ions:}\)
Precipitation consumes \(0.10\,\mathrm{mol}\) of barium ions.
The remaining amount is
\[
n_{\mathrm{Ba^{2+},final}}=0.12-0.10
\]
\[
n_{\mathrm{Ba^{2+},final}}=0.02\,\mathrm{mol}
\]
No free sulphate ions remain under the stated conditions.
\(\textbf{Combining the dissolved ion inventory:}\)
\[
n_{\mathrm{ions,total}}=0.40+0.44+0.02
\]
\[
n_{\mathrm{ions,total}}=0.86\,\mathrm{mol}
\]
\(\textbf{Charge-balance verification:}\)
The positive charge amount is
\[
0.40+2(0.02)=0.44\,\mathrm{mol}
\]
of elementary charges.
The chloride ions provide the same negative charge amount.
The final solution is electrically neutral.
The precipitate is excluded from the dissolved-ion count, but its formation is essential for reconstructing the original salt mixture.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{original}}=25.9\,\text{g},\quad n_{\mathrm{ions,total}}=0.86\,\mathrm{mol}}
\]
398. A balance is used to weigh a container holding different known amounts of a pure anhydrous compound \(\mathrm{M(NO_3)_2}\). M is an unknown metal, and the container mass remains constant between weighings.
The horizontal axis represents the amount of compound placed in the container, in moles.
The vertical axis represents the combined mass of the container and compound, in grams.
The graph is a straight line passing through the points (0.10 mol, 32.0 g) and (0.30 mol, 68.0 g).
What are the atomic mass of M and the amount of oxygen atoms in a separate \(0.25\,\mathrm{mol}\) sample of the compound? (Atomic masses: N = 14, O = 16)
ⓐ. \(40\,\mathrm{u}\) and \(1.50\,\mathrm{mol}\)
ⓑ. \(56\,\mathrm{u}\) and \(0.75\,\mathrm{mol}\)
ⓒ. \(56\,\mathrm{u}\) and \(1.50\,\mathrm{mol}\)
ⓓ. \(40\,\mathrm{u}\) and \(0.75\,\mathrm{mol}\)
Correct Answer: \(56\,\mathrm{u}\) and \(1.50\,\mathrm{mol}\)
Explanation: \(\textbf{Interpreting the measured combined mass:}\)
The balance records both the container and the compound.
Therefore, the vertical intercept represents the empty container mass, while the increase in measured mass per mole represents the compound molar mass.
The governing relationship is
\[
m_{\mathrm{measured}}=m_{\mathrm{container}}+nM
\]
\(\textbf{Extracting molar mass from the graph's slope:}\)
The two plotted measurements differ by
\[
\Delta m=68.0-32.0
\]
\[
\Delta m=36.0\,\text{g}
\]
The corresponding change in compound amount is
\[
\Delta n=0.30-0.10
\]
\[
\Delta n=0.20\,\mathrm{mol}
\]
Therefore,
\[
M=\frac{\Delta m}{\Delta n}
\]
\[
M=\frac{36.0}{0.20}
\]
\[
M=180\,\mathrm{g\,mol^{-1}}
\]
\(\textbf{Separating the nitrate-group contribution:}\)
One nitrate group has formula mass
\[
m_{\mathrm{NO_3}}=14+3(16)
\]
\[
m_{\mathrm{NO_3}}=62\,\mathrm{u}
\]
Two nitrate groups contribute
\[
2(62)=124\,\mathrm{u}
\]
Let the atomic mass of M be \(a\,\mathrm{u}\).
\[
a+124=180
\]
\[
a=56
\]
Therefore, M has atomic mass \(56\,\mathrm{u}\).
\(\textbf{Counting oxygen atoms in the separate sample:}\)
Each \(\mathrm{M(NO_3)_2}\) formula unit contains two nitrate groups.
Each nitrate group contains three oxygen atoms.
Consequently, the formula unit contains six oxygen atoms.
\[
n_O=6n_{\mathrm{compound}}
\]
\[
n_O=6(0.25)
\]
\[
n_O=1.50\,\mathrm{mol}
\]
\(\textbf{Checking the physical meaning of the intercept:}\)
At \(0.10\,\mathrm{mol}\), the compound alone weighs
\[
m_{\mathrm{compound}}=0.10(180)=18.0\,\text{g}
\]
The container mass is therefore
\[
m_{\mathrm{container}}=32.0-18.0
\]
\[
m_{\mathrm{container}}=14.0\,\text{g}
\]
At \(0.30\,\mathrm{mol}\), the predicted combined mass is
\[
14.0+0.30(180)=68.0\,\text{g}
\]
Both plotted points agree.
Using the combined mass directly as the compound mass would introduce an error because of the container's fixed contribution.
The graph slope removes that contribution and supplies the molar mass needed for formula interpretation.
\(\textbf{Final answer:}\)
\[
\boxed{m_M=56\,\mathrm{u},\quad n_O=1.50\,\mathrm{mol}}
\]
399. Hydrogen burns in oxygen according to
\[
\mathrm{2H_2(g)+O_2(g)\rightarrow2H_2O(g)}
\]
A rigid vessel initially contains \(0.40\,\mathrm{mol}\) hydrogen, \(0.30\,\mathrm{mol}\) oxygen and \(0.20\,\mathrm{mol}\) inert nitrogen. All hydrogen reacts completely. First, the gaseous reaction products are examined while all produced water remains as vapour. Next, the vessel is returned to the same reference temperature after all water has been condensed and removed, without removing the other gases. Assume ideal-gas behaviour whenever a species is gaseous. What is the ratio of the pressure before water removal to the initial pressure, and what is the oxygen mole fraction in the final dry gas?
ⓐ. \(\dfrac79\) and \(\dfrac13\)
ⓑ. \(\dfrac79\) and \(\dfrac12\)
ⓒ. \(\dfrac59\) and \(\dfrac13\)
ⓓ. \(\dfrac59\) and \(\dfrac12\)
Correct Answer: \(\dfrac79\) and \(\dfrac13\)
Explanation: \(\textbf{Identifying the first-stage oxygen requirement:}\)
Two moles of hydrogen require one mole of oxygen.
Complete consumption of the initial hydrogen therefore requires
\[
n_{\mathrm{O_2,consumed}}=0.40\left(\frac12\right)
\]
\[
n_{\mathrm{O_2,consumed}}=0.20\,\mathrm{mol}
\]
The available oxygen amount is \(0.30\,\mathrm{mol}\), so hydrogen is limiting.
\(\textbf{Reconstructing the hot gaseous products:}\)
The water-vapour amount is
\[
n_{\mathrm{H_2O(g)}}=0.40\,\mathrm{mol}
\]
The remaining oxygen is
\[
n_{\mathrm{O_2,remaining}}=0.30-0.20
\]
\[
n_{\mathrm{O_2,remaining}}=0.10\,\mathrm{mol}
\]
The nitrogen remains unchanged at \(0.20\,\mathrm{mol}\).
\(\textbf{Calculating the pressure ratio before condensation:}\)
The initial total gaseous amount is
\[
n_i=0.40+0.30+0.20
\]
\[
n_i=0.90\,\mathrm{mol}
\]
While water remains gaseous, the total amount is
\[
n_{\mathrm{vapour\ stage}}=0.40+0.10+0.20
\]
\[
n_{\mathrm{vapour\ stage}}=0.70\,\mathrm{mol}
\]
At the same reference temperature and vessel volume,
\[
\frac{P_{\mathrm{vapour\ stage}}}{P_i}=\frac{0.70}{0.90}
\]
\[
\frac{P_{\mathrm{vapour\ stage}}}{P_i}=\frac79
\]
\(\textbf{Applying the subsequent separation:}\)
All water is condensed and removed.
The final dry gas therefore contains only oxygen and nitrogen.
\[
n_{\mathrm{dry}}=0.10+0.20
\]
\[
n_{\mathrm{dry}}=0.30\,\mathrm{mol}
\]
\(\textbf{Calculating the oxygen mole fraction:}\)
\[
X_{\mathrm{O_2,dry}}=\frac{0.10}{0.30}
\]
\[
X_{\mathrm{O_2,dry}}=\frac13
\]
\(\textbf{Checking the distinction between reaction and separation:}\)
The chemical reaction reduces the total gas amount from 0.90 to \(0.70\,\mathrm{mol}\) while water remains vapour.
The later removal of water further reduces the dry gas amount to \(0.30\,\mathrm{mol}\).
These two changes arise from different processes.
The first follows chemical stoichiometry; the second follows physical phase separation.
The stated same-temperature comparisons permit the pressure ratios to be calculated from ideal-gas molecular amounts.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{P_{\mathrm{vapour\ stage}}}{P_i}=\frac79,\quad X_{\mathrm{O_2,dry}}=\frac13}
\]
400. Two samples, P and Q, are pure molecular compounds containing the same elements X and Y. Compound P has the empirical formula \(\mathrm{XY_2}\), while elemental analysis of Q gives an unreduced X-to-Y atomic ratio of \(2:4\). Independent measurements establish that Q has twice the molecular molar mass of P. Consider the following statements.
Statement I: The empirical formulae of P and Q are identical after simplification.
Statement II: The molecular formula of Q must contain twice as many X atoms and twice as many Y atoms as the molecular formula of P, provided their isotopic compositions are identical.
Statement III: Equal masses of P and Q contain equal numbers of molecules.
Statement IV: Equal masses of P and Q contain equal masses of X and equal masses of Y, provided their isotopic compositions are identical.
Which statements are correct?
ⓐ. I and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, II, III and IV
Correct Answer: I, II and IV only
Explanation: \(\textbf{Evaluating Statement I:}\)
Compound P has the empirical formula \(\mathrm{XY_2}\).
For Q, the measured atomic ratio is
\[
X:Y=2:4=1:2
\]
Therefore, the empirical formula of Q is also \(\mathrm{XY_2}\).
Statement I is correct.
\(\textbf{Evaluating Statement II:}\)
Let the molecular formula of P be
\[
\mathrm{X}_{k}\mathrm{Y}_{2k}
\]
where \(k\) is a positive integer.
Let the molar mass corresponding to one empirical-formula group be \(M_e\).
Then,
\[
M_P=kM_e
\]
The molecular molar mass of Q is twice that of P.
\[
M_Q=2M_P
\]
\[
M_Q=2kM_e
\]
Since Q has the same empirical composition and the isotopic compositions are identical, its molecular formula must be
\[
\mathrm{X}_{2k}\mathrm{Y}_{4k}
\]
Thus, Q contains twice as many X atoms and twice as many Y atoms per molecule as P.
Statement II is correct.
\(\textbf{Evaluating Statement III:}\)
For a fixed sample mass \(m\), the amount of molecules is
\[
n=\frac{m}{M}
\]
Since \(M_Q=2M_P\), for equal sample masses,
\[
\frac{n_Q}{n_P}=\frac{M_P}{M_Q}
\]
\[
\frac{n_Q}{n_P}=\frac{1}{2}
\]
Therefore, Q contains half as many molecules as P in equal-mass samples.
Statement III is incorrect.
\(\textbf{Evaluating Statement IV:}\)
The two compounds have the same simplest elemental atomic ratio.
With identical isotopic compositions, their corresponding elemental mass fractions are also identical.
The mass fraction of X is
\[
w_X=\frac{M_X}{M_X+2M_Y}
\]
The mass fraction of Y is
\[
w_Y=\frac{2M_Y}{M_X+2M_Y}
\]
Multiplying both molecular subscripts by the same factor does not change either mass fraction.
Consequently, equal total masses of P and Q contain equal masses of X and equal masses of Y.
Statement IV is correct.
\(\textbf{Final conclusion:}\)
Statements I, II and IV are correct.
A common empirical composition can coexist with different molecular formulae and different molecular molar masses without changing the elemental mass percentages.