Rotational Motion Mock Test – NEET Physics
GKaim: Measure | Improve | Achieve

Rotational Motion Mock Test – NEET Physics

Progressive Test — Guest First Round

0%

Rotational Motion – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. At a certain instant, the following measurements are reported for three points of one rigid body rotating about a fixed axis.

Point in m in in
P 0.10 0.50 0.20
Q 0.20 1.00 0.40
R 0.30 1.50 0.90

Assuming the distances from the axis are correct, which reported measurement is inconsistent with rigid-body rotation?

2 / 50

2. A force

acts at

Its measured torque about the origin is

Which force is compatible with this torque?

3 / 50

3. For a rigid body undergoing rotation about a fixed axis, consider the following statements.
Statement I: All points not on the axis undergo the same angular displacement during a specified time interval.
Statement II: All points have the same instantaneous angular velocity about the fixed axis.
Statement III: All points not on the axis have the same linear speed.
Statement IV: For two points at perpendicular distances and , their instantaneous speed ratio is .
Statement V: A particle lying on the fixed axis has zero linear velocity.
Which combination is correct?

4 / 50

4. A uniform plank of length and weight rests horizontally on two narrow supports located and from its left end. A person of weight , initially near the centre, walks slowly towards the right end. At the instant the plank is just about to lose contact with the left support, the person's position from the left end and the reaction at the right support are

5 / 50

5. Three particles move parallel to the direction with equal momentum magnitude . Their paths are and , respectively. Their masses and speeds may be different, but each has momentum . What is the ratio of the magnitudes of their angular momenta about the origin?

6 / 50

6. A rigid horizontal platform is acted upon by a downward force at and another downward force at . The supporting surface exerts a single resultant upward force at . No other vertical forces or couples act. For equilibrium,

7 / 50

7. A thin ring of mass and radius rotates about its central axis perpendicular to its plane. A uniform disc of mass and radius rotates about its corresponding central axis. Their moments of inertia are equal. If both rotate with the same angular speed, the value of and the ratio are

8 / 50

8. A particle of mass is at and a particle of mass is at . The mass of the first particle is then multiplied by a positive factor , while the second particle is moved from to . It is required that the centre of mass after these changes remain at exactly its original position. Which conclusion is correct?

9 / 50

9. A thin ring of mass and radius and a solid cylinder of mass and radius have equal moments of inertia about their respective symmetry axes. The ratio is

10 / 50

10. A couple consists of two forces of magnitude whose parallel lines of action are apart. A single additional force is then applied along a line whose perpendicular distance from a specified point is . Its moment about opposes the couple. The magnitude of the net moment about is

11 / 50

11. Two particles of masses and are situated at and , respectively. Their centre of mass is at . The ratio is

12 / 50

12. At an instant, point A of a rigid body rotating about a fixed axis is from the axis. Its tangential and radial acceleration magnitudes are

Point B is from the same axis. The angular acceleration magnitude, angular speed magnitude and total acceleration magnitude of B are

13 / 50

13. A circular platform has moment of inertia about its frictionless vertical axis. Two students, each of mass , initially stand at opposite points on the rim while the system rotates with angular speed . They simultaneously move to positions at distance from the axis. Treat the students as particles. The final angular speed is

14 / 50

14. A rigid body of mass has radius of gyration about an axis through its centre of mass. A second axis is parallel to the first. Under the same applied torque, the angular acceleration about the second axis is one-fifth of that about the centre-of-mass axis. The separation between the axes is

15 / 50

15. Assertion: For motion with a constant non-zero angular acceleration, if at two different instants the angular velocities satisfy

then the angular positions at those instants are equal.
Reason: For constant angular acceleration,

16 / 50

16. A rigid body rotates about a fixed axis. Its centre of mass is from the axis, a material point lies on the axis, and another point is from the axis. At an instant when the angular speed is , consider the statements:
Statement I: .
Statement II: .
Statement III: .
Statement IV: must coincide with because every rigid body rotates about its centre of mass.
Which combination is correct?

17 / 50

17. A force of magnitude acts on a rigid body. Its line of action passes through point , but the actual point of application is a distance from . Which statement is correct about the moment of this force about ?

18 / 50

18. The following standard moment-of-inertia data are proposed for bodies of mass and radius .

Body-axis combination Proposed
P. Thin ring, central perpendicular axis
Q. Uniform disc, central perpendicular axis
R. Solid sphere, diameter
S. Solid cylinder, symmetry axis

Which row is inconsistent?

19 / 50

19. A translating particle experiences a force parallel to its velocity . A rotating rigid body experiences a torque in the same rotational sense as its angular velocity . Initially their powers are equal. The force is then doubled while the particle speed is halved; simultaneously the torque is halved while the angular speed is doubled. Which statement is correct?

20 / 50

20. At instant , two points and of the same rigid body have speed magnitudes and , respectively, while the body rotates anticlockwise. At instant , their speed magnitudes are and , respectively, while the body rotates clockwise about the same fixed axis. Which relation is correct?

21 / 50

21. A rigid body is constrained to rotate about the fixed -axis. Three different forces are applied separately at the same point

They are



Which statement is correct?

22 / 50

22. A thin hollow cylinder and a solid cylinder have the same mass and radius , and each rotates about its own symmetry axis. Starting from rest, the same constant torque acts on each for the same time . Which statement is correct?

23 / 50

23. Two different force systems act in the -plane.
System A: a single upward force acts at .
System B: two upward forces act at and .
Which statement about their resultant force and torque about the origin is correct?

24 / 50

24. A rigid disc rotates about the fixed -axis through its centre. At a certain instant, two marked points and are located at and , respectively. The angular velocity is , while the angular acceleration is , where and denote positive magnitudes.

Which statement correctly gives the directions of the instantaneous linear velocities and tangential accelerations?

25 / 50

25. A rigid body of mass has moment of inertia about an axis through its centre of mass. Two axes A and B are parallel to this axis and are at perpendicular distances and , respectively, from it. Which relation is correct?

26 / 50

26. At the same point of a rigid body, two equal forces of magnitude act separately at the same distance from a pivot. Relative to the outward position vector , force 1 is directed anticlockwise and force 2 is directed clockwise. If both forces act simultaneously, the net moment about the pivot is

27 / 50

27. A plane lamina of mass has, about mutually perpendicular in-plane axes and through its centre of mass ,

A point lies on the -axis at distance from , where

Axis passes through perpendicular to the lamina. Which statement is correct?

28 / 50

28. A rigid body of moment of inertia rotates about a fixed -axis. A force

acts at the point

At the same time an external couple

acts on the body. The angular acceleration about the fixed axis is

29 / 50

29. Consider the following statements about a system of forces acting on a rigid body.
Statement I: Zero resultant force does not necessarily imply zero resultant torque.
Statement II: Zero resultant torque about one point does not necessarily imply zero resultant force.
Statement III: A force whose line of action passes through the chosen pivot contributes zero torque about that pivot but may still contribute to the resultant force.
Statement IV: If the resultant force of a force system is zero, its total torque has the same value about different choices of origin.
Which combination is correct?

30 / 50

30. Consider the following statements concerning the centre of mass of rigid bodies.
Statement I: If a mass distribution has inversion symmetry about a point , its centre of mass is at .
Statement II: A single plane of reflection symmetry requires the centre of mass to lie in that plane, but does not necessarily determine a unique point.
Statement III: The centre of mass of a rigid body must lie within material occupied by the body.
Statement IV: If the complete mass distribution of one body is the mirror image of another about the -axis, their centre-of-mass -coordinates are opposite while their -coordinates are equal.
Which combination is correct?

31 / 50

31. Consider the following statements about the perpendicular-axis theorem.
Statement I: For a plane lamina lying in the -plane, if the - and -axes are mutually perpendicular and intersect at the same point through which the perpendicular -axis passes, then

Statement II: Rotational symmetry of the lamina about the -axis is necessary for the theorem to be valid.
Statement III: The theorem can be applied to an irregular plane lamina provided the required axis conditions are satisfied.
Statement IV: The same relation can be applied as a general theorem to any three-dimensional rigid body.
Which combination is correct?

32 / 50

32. The same rigid body of mass has radii of gyration and about two different fixed axes A and B. The same torque magnitude is applied about the two axes in separate experiments, and the measured angular accelerations satisfy

If the body is instead rotated with the same angular speed about each axis, which pair is correct?

33 / 50

33. Two uniform thin rods of the same linear mass density are rigidly joined at one end at the origin. Rod , of length , lies along the positive -axis. Rod , of length , initially lies along the positive -axis. Rod is then rotated through about the origin so that it lies along the negative -axis, while rod remains fixed.

The displacement of the centre of mass of the composite body is

34 / 50

34. Measurements of the moment of inertia of the same rigid body about several mutually parallel axes give:

Perpendicular distance from the centre-of-mass axis () Moment of inertia ()
0 6
1 8
2 14

The mass of the body and its moment of inertia about a parallel axis at are

35 / 50

35. Two coaxial rotors are initially free to rotate independently about the same frictionless axis. Rotor A has moment of inertia and angular velocity . Rotor B has moment of inertia and angular velocity . They are coupled so that they eventually rotate together. Which statement is correct?

36 / 50

36. Four instantaneous particle states about the same origin are listed below.

State
P
Q
R
S

Which pair correctly identifies a state with non-zero angular momentum but zero instantaneous torque, and a state with zero angular momentum but non-zero instantaneous torque, respectively?

37 / 50

37. A system of particles is observed about a fixed origin . During a certain interval, the net external force on the system is non-zero, but the net external torque about is zero. Which statement is necessarily correct?

38 / 50

38. A system of fixed total mass rotates about an axis with no external torque. Due to internal redistribution, its angular speed decreases from to . If its initial moment of inertia and radius of gyration are and , respectively, the final values are

39 / 50

39. The angular velocity of a rigid body about a fixed axis is from to , then decreases linearly from at to at . A marked point lies from the axis.

Which pair gives the net angular displacement of the body and the total distance travelled by the marked point from to ?

40 / 50

40. Three vertical forces act on a rigid body along the -axis: upward at , downward at , and upward at . An equivalent single vertical force is required to produce both the same resultant force and the same moment about the origin. Which description is correct?

41 / 50

41. A rigid body rotates about a fixed axis with constant moment of inertia. A force is applied at a point from the axis. Initially the angle between its position vector and the force is . An opposing perpendicular force of acts with moment arm . The force is then redirected to become perpendicular to its position vector, while the opposing force is unchanged. The ratio of the final angular acceleration magnitude to the initial angular acceleration magnitude is

42 / 50

42. A uniform circular disc of mass and radius is considered about two tangent axes. Axis P is perpendicular to the plane of the disc, while axis Q lies in its plane and is parallel to a diameter. Starting from rest, the same constant torque acts for the same time about each axis in separate trials. The ratios and are

43 / 50

43. A force of fixed magnitude is applied at a point whose distance from a pivot is . Consider the following statements.
Statement I: The moment magnitudes are equal when the angle between and is or .
Statement II: For fixed and , the maximum possible moment magnitude is .
Statement III: The moment magnitude depends only on the distance from the pivot to the point of application.
Statement IV: Doubling while halving the perpendicular moment arm leaves the moment magnitude unchanged.
Which combination is correct?

44 / 50

44. A system is acted upon only by an external couple

Its resultant external force is therefore zero. Angular momentum is calculated about two fixed origins and . Which statement is correct?

45 / 50

45. A plane lamina has moments of inertia and about mutually perpendicular in-plane axes through point , and about the perpendicular axis through . It is known that

and

If the lamina rotates with the same angular speed magnitude about the - and -axes in separate trials, the ratio is

46 / 50

46. A particle of mass moves with constant velocity along the straight line . At an arbitrary instant its coordinate is . Let and . The angular momenta of the particle about and , respectively, are

47 / 50

47. A constant force acts on a particle of mass through distance , while a constant torque acts on a rigid body of moment of inertia through angular displacement . Both systems start from rest. It is found that

and

where is a fixed length. The ratio of their final speeds is

48 / 50

48. Consider the following statements for a system about a specified fixed axis.
Statement I: If the total external angular impulse over an interval is zero, the final angular momentum equals the initial angular momentum.
Statement II: Zero total external angular impulse over an interval does not require the external torque to have been zero at every instant.
Statement III: If initial and final moments of inertia are also equal and the angular momentum has not reversed direction, the final angular velocity equals the initial angular velocity.
Statement IV: If the initial and final angular velocities are equal, the external torque must have been zero throughout the interval.
Which combination is correct?

49 / 50

49. For a rigid body rotating about a fixed symmetry axis, a graph of axial angular momentum versus angular velocity is a straight line through the origin and passes through . In a separate experiment on the same body about the same axis, the graph is a straight line of slope .

The moment of inertia, net axial torque and angular acceleration in the second experiment are

50 / 50

50. The graph of a rigid body is parabolic, indicating constant angular acceleration. The slope of the tangent is at and at . The graph passes through at . The body's moment of inertia is .

The angular position at and the net torque are

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top