Electromagnetic Induction And Alternating Currents Mock Test – NEET Physics
GKaim: Measure | Improve | Achieve

Electromagnetic Induction and Alternating Currents Mock Test – NEET Physics

Progressive Test — Guest First Round

0%

Electromagnetic Induction and Alternating Currents – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Four rigid conducting loops are subjected to the following operations. Each loop has constant resistance and negligible self-inductance.

Operation Description
P A loop translates uniformly without rotating or deforming, remaining entirely inside a spatially uniform, time-independent magnetic field.
Q A circular loop rotates uniformly about an axis through its centre perpendicular to its plane, within a spatially uniform, time-independent magnetic field.
R A loop rotates uniformly about a diameter while its plane changes orientation relative to a time-independent magnetic field perpendicular to the rotation axis.
S A stationary loop remains perpendicular to a spatially uniform magnetic field whose magnitude varies sinusoidally in time.

Which statement correctly identifies operations capable of producing a nonzero induced emf during ordinary parts of the motion or field variation?

2 / 50

2. A uniformly rotating coil of an ideal AC generator is connected through slip rings and brushes to a fixed external resistor. The generator is driven by a motor at constant angular speed.
A student makes the following observations:
P: With the external circuit open, a sinusoidal terminal emf can be measured.
Q: When the external resistor is connected, alternating current flows and the motor must supply additional mechanical work to sustain the same speed.
R: When the direction of the magnetic field is reversed without changing rotational speed or the chosen terminal labels, the induced-emf waveform reverses in sign.
Consider the following statements.
Statement I: Observation P is consistent with Faraday's law because an induced emf does not require a closed conducting path.
Statement II: Observation Q is consistent with energy conservation and Lenz's law; the added mechanical work accounts for electrical energy delivered to the load in the ideal model.
Statement III: Observation R means that the RMS emf must become zero because the emf polarity is reversed.
Statement IV: The average current through the external resistor in a complete cycle is zero, although its average Joule-heating power is positive.
Which statements are correct?

3 / 50

3. An ideal step-up transformer has primary turns and secondary turns. Its primary is supplied with a sinusoidal RMS voltage.
The secondary feeds a distant series RL load having

through transmission conductors with a combined resistance of .
The line resistance and the RL load are in series on the secondary side. The transformer has negligible losses.
The average power dissipated in the conductors, average real power received by the distant load, and primary RMS current are:

4 / 50

4. An experimental series RC circuit is connected to a sinusoidal source of constant RMS voltage .
The circuit contains

Initially, the angular frequency is .
The experimenter doubles the angular frequency and then adjusts the RMS source voltage so that the RMS circuit current remains exactly equal to its original value.
The required new source RMS voltage, ratio of new to original maximum capacitor charge magnitudes, and ratio of new to original resistor-heating powers are:

5 / 50

5. An initially unenergised ideal inductor of inductance is connected in series with a resistor of , an ideal battery and a switch. At , the switch is closed. Assume the current was zero immediately before closing and that the battery remains connected afterward.
The rate of increase of current immediately after closing the switch, together with the final steady current, is:

6 / 50

6. The current in an ideal inductor is controlled so that its self-produced magnetic flux linkage varies sinusoidally:

The inductance is constant at .
In experiment P, the angular frequency is . In experiment Q, it is doubled to , while the flux-linkage amplitude and inductance remain unchanged.
Which statement correctly compares the peak induced-emf magnitudes, RMS currents and maximum magnetic energies in the two experiments?

7 / 50

7. A sinusoidal voltage

is applied across an ideal inductor.
The current is observed to be

The current and voltage references follow the passive sign convention.
Consider the interval from to , corresponding to the first quarter of a source-voltage cycle.
The inductance, initial magnetic energy, and net electrical energy absorbed by the inductor from the source during this interval are:

8 / 50

8. An alternating voltage and current in a circuit have the same angular frequency and are represented by

and

where voltage is in volts, current is in amperes and time is in seconds. The reference directions of voltage and current are fixed.
The phase relationship and corresponding time difference between the positive maxima of voltage and current are:

9 / 50

9. A small circular conducting coil is fixed midway between two identical bar magnets placed on opposite sides of its axis. The two magnets move symmetrically toward the coil at identical speeds. Their magnetic moments remain aligned along the common axis. In experiment P, the north poles of both magnets face the coil. In experiment Q, the magnet on the right is reversed so that its south pole faces the coil, while its motion and all other conditions remain unchanged. Assume that the magnetic fields from the two magnets superpose and that each moving magnet independently produces the same magnitude of flux-change rate through the coil.
Which conclusion is correct?

10 / 50

10. A resistor of and an ideal inductor of are connected in series with an adjustable ideal capacitor. The circuit is supplied by a sinusoidal source of angular frequency and constant RMS voltage .
Three capacitor settings are tested:

Setting Capacitance
P
Q
R

Which statement correctly orders the RMS currents and identifies the phase relationships in settings P and R?

11 / 50

11. A rectangular conducting loop of height has part of its area inside a magnetic-field region. The field points out of the page, is spatially uniform within that region, and increases with time according to

where is in tesla and is in seconds.
At , the horizontal width of the loop remaining inside the magnetic region is . The loop is being pulled horizontally out of the region at constant speed , so this overlap width decreases with time.
The loop has resistance and negligible self-inductance.
Which conclusion is correct at , with the current direction judged from the front of the page?

12 / 50

12. A rectangular conducting loop moves horizontally through a finite region of uniform magnetic field.

The loop has a vertical side of 0.30 m and a horizontal side of 0.20 m. It moves to the right at 2.0 m/s without rotating. A stationary rectangular magnetic-field region extends 0.60 m horizontally, is wider than the loop vertically, and contains a uniform magnetic field of 0.50 T directed into the page. The loop enters through the left boundary, becomes completely enclosed by the field region, and later exits through the right boundary. Its total electrical resistance is 0.50 Ω and self-inductance is negligible.

For the complete passage, determine the total Joule heat, net signed charge transferred through the loop, and induced-current directions during entry and exit, as viewed from the front.

13 / 50

13. A square conducting loop of side , resistance , and negligible self-inductance moves right at a constant speed of .
It passes across a straight boundary separating two large regions of uniform magnetic field.

The left region has a magnetic field of 0.40 T directed into the page. The right region has a magnetic field of 0.40 T directed out of the page. Both fields are perpendicular to the loop plane. Initially, the square loop is entirely inside the left region, with its leading right edge exactly at the boundary. The loop then crosses the boundary while maintaining its orientation. Its speed is constant, and the magnetic fields are stationary.

During the complete crossing, the induced-current magnitude, its direction as viewed from the front, and total Joule heat produced are:

14 / 50

14. An elementary electromagnetic generator produces a sinusoidal induced emf of peak magnitude .
Two different collecting arrangements are considered.

Arrangement P uses two continuous slip rings connected to the ends of a rotating coil. Arrangement Q uses a split-ring commutator that reverses the external connection after every half-revolution, ideally converting the alternating coil emf into a unidirectional pulsating terminal voltage. Each arrangement separately supplies the same pure resistor R. The generator has negligible internal resistance and inductance, and the collecting contacts are ideal.

Consider the following statements.
Statement I: The signed average terminal voltage over a complete revolution is zero in P but positive in Q for the stated output polarity.
Statement II: The RMS terminal voltages in P and Q are equal if their underlying generated peak emfs are equal.
Statement III: The resistor-heating power in Q is twice that in P because rectification makes the current unidirectional.
Statement IV: The output of Q is unidirectional and pulsating, rather than a constant DC voltage.
Which statements are correct?

15 / 50

15. A series RC circuit is connected to a sinusoidal source of RMS and angular frequency .
An oscilloscope shows that the circuit current reaches its positive maximum exactly one-eighth of a period before the source voltage reaches its positive maximum.
The RMS current is .
Assume an ideal capacitor and a purely resistive series resistor.
The resistance, capacitance and average power consumed by the circuit are:

16 / 50

16. A rectangular conducting coil rotates uniformly about a fixed axis through its centre. Its area vector remains perpendicular to the axis.
A spatially uniform magnetic field also rotates about that same axis. The area vector and magnetic-field direction are initially parallel.
The magnetic-field magnitude, coil area, number of turns and coil resistance remain constant.
In experiment P, the magnetic field is stationary while the coil rotates with angular speed .
In experiment Q, the coil again rotates with angular speed , but the magnetic-field direction rotates in the same sense at angular speed .
In experiment R, the magnetic-field direction rotates in the opposite sense at angular speed .
Assume the changing magnetic flux is prescribed and that induced currents do not alter the imposed motions.
The ratios of peak induced emf, generated-current frequency and average resistor-heating power in Q to those in P are:

17 / 50

17. A series LCR circuit is studied using a sinusoidal source of constant RMS voltage .
Its resistance is , while the inductance and capacitance are unknown.
The measured current-frequency graph has one maximum.

The horizontal axis is source angular frequency and the vertical axis is RMS circuit current. The peak current is 10 A. On the lower-frequency side, the current first reaches A at 80 rad/s. On the higher-frequency side, it again equals A at 125 rad/s. Below the peak, current leads source voltage; above the peak, current lags source voltage. The source voltage remains constant throughout.

The inductance, capacitance and average resistor power at either of the two marked off-resonance frequencies are:

18 / 50

18. An ideal inductor, an ideal capacitor and an ordinary ohmic resistor are tested separately using a DC source and a sinusoidal AC source. Both sources are assumed ideal. For the DC experiment, observations are taken only after all switching transients have ended. For the AC experiment, the steady sinusoidal state is considered.
Consider the following statements.
Statement I: Under steady DC conditions, an ideal inductor can carry nonzero constant current with zero voltage across it.
Statement II: Under steady DC conditions, an ideal capacitor can maintain a nonzero voltage while carrying zero current.
Statement III: For a fixed RMS AC voltage, increasing frequency increases the RMS current through a pure inductor and decreases the RMS current through a pure capacitor.
Statement IV: The RMS current through an ideal ohmic resistor is independent of frequency when the applied RMS voltage and resistance remain unchanged.
Which statements are correct?

19 / 50

19. Two identical -turn coils are wound on a common magnetic core. Each coil has resistance , and the same changing magnetic flux links every turn of both coils. The prescribed flux change produces an induced emf of in each coil, with the same winding polarity.
The coils are connected to a fixed external resistor in two different arrangements:
P: The coils are connected in series so that their induced emfs aid.
Q: The coils are connected in parallel with corresponding induced-emf terminals joined.
Assume the flux variation is prescribed, the coils have negligible self-inductance and mutual current-reaction effects, and the windings have identical emf waveforms.
The ratio of current through the external resistor in Q to that in P, and the ratio of total winding heating in Q to that in P, are:

20 / 50

20. An ideal rotating-coil AC generator is connected to a pure resistor through slip rings and brushes.
Its signed magnetic flux linkage is

The coil rotates in the positive angular direction, and the induced emf is defined by

Four successive instants are considered:

Instant P corresponds to angular position 0°. Instant Q is one-quarter revolution later at 90°. Instant R is another quarter revolution later at 180°. Instant S is another quarter revolution later at 270°. The magnetic flux linkage follows a smooth cosine waveform, beginning at its positive maximum at P. The load remains purely resistive.

Which sequence correctly describes the signed induced emf at P, Q, R and S, together with the relative instantaneous resistor-heating rates?

21 / 50

21. A sinusoidal RMS source supplies two parallel appliances.
Appliance P is a pure resistor consuming .
Appliance Q is inductive and also consumes , but at a lagging power factor of .
The two appliances are supplied through common conductors having a combined resistance of .
Assume the appliance-terminal voltage is maintained at RMS and that conductor reactance is negligible.
The magnitude of total RMS current, the combined load's power factor and average conductor-heating power are:

22 / 50

22. A series LCR circuit contains a resistor of , an ideal inductor of , and an ideal capacitor of unknown capacitance.
The circuit is supplied by a sinusoidal source of angular frequency .
Three ideal AC voltmeters measure the following RMS voltages:

An oscilloscope establishes that current leads the source voltage.
The capacitor's capacitance, resonance angular frequency and RMS capacitor voltage at the stated operating frequency are:

23 / 50

23. A simple laboratory generator consists of a rectangular conducting coil rotating uniformly between the poles of a permanent magnet.
The coil is connected to an external resistor through two slip rings and stationary brushes.
A second arrangement uses a split-ring commutator instead of the two continuous slip rings.
Assume ideal electrical contacts and identical rotation, field and resistance in both arrangements.
Consider the following statements.
Statement I: The emf induced in the rotating coil reverses polarity every half-revolution during uniform rotation in a stationary uniform magnetic field.
Statement II: Continuous slip rings maintain electrical connections to the rotating coil without mechanically reversing the connections every half-revolution.
Statement III: In the ideal split-ring arrangement, the external terminal voltage can become unidirectional and pulsating, even though the induced emf within the rotating coil continues to alternate.
Statement IV: Replacing slip rings with an ideal split-ring commutator necessarily increases the RMS heating current through an unchanged pure resistor because it increases the magnitude of the induced emf during each half-revolution.
Which statements are correct?

24 / 50

24. A sinusoidal alternating current is represented by

where current is measured in amperes and time in seconds. A conducting circuit carries this current through a fixed cross-section. The waveform begins a positive half-cycle at .
The frequency is then doubled without changing the peak current magnitude or initial phase.
The magnitude of charge passing through the cross-section in the positive direction during one positive half-cycle before and after doubling the frequency is:

25 / 50

25. Two practical transformers have identical primary and secondary windings, magnetic-core material, core dimensions and operating frequency.
Transformer P uses a solid conducting magnetic core.
Transformer Q uses thin sheets of the same magnetic material, separated from one another by insulating layers.
Both transformers are supplied with the same sinusoidal primary voltage and deliver the same useful real output power. Assume that the laminated core retains essentially the same useful magnetic-flux linkage as the solid core.
Consider the following statements.
Statement I: The laminated construction can reduce core heating because it restricts large circulating eddy-current paths.
Statement II: The insulating layers increase electrical opposition to currents attempting to circulate between adjacent laminations.
Statement III: Laminating the core necessarily eliminates hysteresis loss completely because hysteresis requires a closed electrical conduction path.
Statement IV: If the winding losses remain unchanged and the core loss decreases, the real input power required for the same useful output can decrease without changing the ideal voltage-turns ratio.
Which statements are correct?

26 / 50

26. A straight conducting rod rotates uniformly about a fixed point O situated between its endpoints P and Q. The distances are

The rod rotates anticlockwise, as viewed from the front of the page, with angular speed . A uniform magnetic field of points out of the page.
The rod is electrically isolated, so charges redistribute until a steady potential difference exists between its endpoints. Assume the rod is ideal and the rotation is uniform.
The magnitude of the potential difference between P and Q, the endpoint at higher potential, and the magnitude of the potential difference between Q and O are:

27 / 50

27. An ideal inductor and an ideal capacitor are tested separately with sinusoidal AC current sources having the same angular frequency and the same RMS current .
The measured inductive reactance is , and the measured capacitive reactance is .
The maximum magnetic energy stored in the inductor, the maximum electric energy stored in the capacitor and their ratio are:

28 / 50

28. An ideal AC generator rotates at a constant angular speed of and produces a sinusoidal peak emf of .
It is connected separately to two different passive series loads.
Load P consists of a resistor and an ideal inductor having reactance .
Load Q consists of an identical resistor and an ideal capacitor having reactance magnitude .
The generator's electrical frequency and peak emf are unchanged between experiments.
Assume negligible generator internal losses and a driving mechanism that maintains constant angular speed.
Which statement correctly compares RMS load currents, average generator driving torques and current phase characters?

29 / 50

29. A rectangular conducting loop moves horizontally to the right across a straight vertical boundary separating two magnetic-field regions. The magnetic field on the left is out of the page, while that on the right is into the page. The loop has vertical side length , total resistance , and constant speed .

The loop lies in the plane of the page, with its horizontal sides parallel to the direction of motion. The straight vertical boundary separates two uniform magnetic fields pointing in opposite directions. During the interval considered, the left vertical side of the loop lies entirely in the left field and the right vertical side lies entirely in the right field. The loop moves rightward without rotation. Neglect friction and self-inductance.

The induced-current magnitude and the external mechanical power needed to maintain constant speed are:

30 / 50

30. A linear solenoid initially has self-inductance . A magnetic core is inserted so that its inductance becomes , without changing its resistance or the source frequency.
Two independent experiments are performed:
P: The solenoid is supplied by an ideal sinusoidal voltage source that maintains the same RMS voltage before and after core insertion.
Q: The solenoid is supplied by an ideal sinusoidal current source that maintains the same RMS current before and after core insertion.
Assume purely sinusoidal steady operation, negligible winding resistance, and no magnetic saturation.
Which statement correctly compares the maximum stored magnetic energy and the relevant electrical response after insertion?

31 / 50

31. A conducting coil of identical turns is placed stationary in a magnetic field perpendicular to its plane. The magnetic field contains two contributions:
(i) a constant uniform field of magnitude directed out of the page;
(ii) a sinusoidally varying uniform field described by , also measured positive out of the page.
The coil area per turn is , and its resistance is . The constant field is then reversed without changing the sinusoidal contribution, coil geometry or resistance.
Consider the following statements.
Statement I: Reversing changes the average magnetic flux through the coil over a complete sinusoidal cycle.
Statement II: Reversing reverses the induced-current direction at every instant.
Statement III: Reversing leaves the induced-emf amplitude and average Joule-heating power unchanged.
Which statements are correct?

32 / 50

32. A real coil consists of an ideal inductor of in series with an unknown winding resistance. This coil, an external resistor, and an ideal capacitor are connected in series to a sinusoidal source of angular frequency .
In steady sinusoidal operation, the source RMS voltage is , and the RMS current is .
An ideal voltmeter is connected across the complete real coil, including its winding resistance.
The winding resistance, RMS voltage indicated by this voltmeter, and average heating power within the coil are:

33 / 50

33. A series LCR circuit contains a resistor of , an ideal inductor of , and an ideal capacitor of .
It is operated at resonance using a sinusoidal source of RMS voltage .
Define a dimensionless quantity by

The energy dissipated during one complete cycle and the value of are:

34 / 50

34. A fixed series LCR circuit contains a resistor , an ideal inductor , and an ideal capacitor .
It is supplied by a sinusoidal source of fixed RMS voltage.
Initially, the source angular frequency is below the circuit's resonance angular frequency, and current leads source voltage.
The source frequency is then increased continuously through resonance to a value above resonance.
During this frequency scan, the resistance is also increased gradually but remains positive throughout.
Consider the following statements.
Statement I: Increasing resistance alone cannot reverse the current's leading or lagging phase character at a fixed frequency when , and frequency remain unchanged.
Statement II: The current can change from leading to lagging as source frequency crosses resonance, despite resistance changing during the scan.
Statement III: The resonance angular frequency of the ideal series LCR circuit must increase whenever resistance increases.
Statement IV: A larger resistance tends to reduce the maximum current at resonance under the same source RMS voltage.
Which statements are correct?

35 / 50

35. An ideal inductor is separately tested at two frequencies using a sinusoidal source whose RMS voltage can be adjusted.
During experiment P, the angular frequency is , the source RMS voltage is , and the RMS current is .
During experiment Q, the angular frequency is increased to , while source RMS voltage is adjusted so that maximum stored magnetic energy becomes twice its value in P.
Assume the inductance is unchanged and the inductor remains ideal.
The inductance, required RMS source voltage in Q, and ratio of RMS current magnitudes are:

36 / 50

36. Two identical stationary coils are placed facing each other. Their mutual inductance is initially .
A controlled current in the first coil increases uniformly at .
The second coil has resistance and negligible self-inductance.
In a second experiment, an intervening magnetic arrangement is modified so that the mutual inductance becomes , while the current-change rate in the first coil is doubled.
The electrical resistance and all other conditions remain unchanged.
The ratio of secondary induced-emf magnitudes, ratio of secondary heating powers, and ratio of magnetic flux-linkage changes over equal time intervals in the second experiment to the first are:

37 / 50

37. A pure resistor of resistance carries a sinusoidal alternating current of unknown peak value and frequency. During , the resistor converts of electrical energy into heat. An integrating instrument also measures the magnitude of charge transferred in the positive direction during one positive half-cycle as .
The resistance remains constant, and the waveform has no DC component.
The peak current and frequency are:

38 / 50

38. An ideal inductor of inductance is connected across a sinusoidal AC source

where voltage is measured in volts and time in seconds.
The current contains only its steady sinusoidal component, and the passive sign convention is used.
Consider the interval

The net electrical energy absorbed by the inductor from the source during this interval, its initial magnetic energy and its final magnetic energy are:

39 / 50

39. A series resistor-capacitor circuit is connected to a sinusoidal AC source of constant RMS voltage . Its average resistor-heating power is measured while the source angular frequency is varied.

The horizontal axis represents angular frequency and the vertical axis represents average real power. The measured power rises smoothly with frequency and approaches a limiting value of at very high frequency. At angular frequency , the measured power is . The resistor and ideal capacitor are unchanged throughout the experiment.

The resistance, capacitance and average resistor power at angular frequency are:

40 / 50

40. Two parallel conducting rails are connected electrically by two separate conducting rods P and Q, both perpendicular to the rails.
The rods can slide independently along the rails.

Rod P forms the left side and rod Q forms the right side of a closed rectangular circuit. Each rod has length 0.50 m. The magnetic field is uniform, directed into the page, and has magnitude 0.80 T. Rod P moves rightwards at 2.0 m/s, while rod Q moves rightwards at 6.0 m/s. The circuit contains a total resistance of 2.0 Ω, distributed in its conducting path. The rods and rails have negligible resistance other than this specified total resistance. External agents maintain both rod speeds constant.

Determine the circulating current magnitude, the direction and magnitude of the magnetic force on the left rod P, and the combined net mechanical power supplied by the external agents.

41 / 50

41. A -turn conducting coil has total circuit resistance and negligible self-inductance. Its signed magnetic flux per turn is controlled according to the following history.

The horizontal axis is time in milliseconds and the vertical axis is signed magnetic flux per turn in millwebers. From 0 to 10 ms, the flux decreases uniformly from +2.0 mWb to -1.0 mWb. From 10 to 30 ms, it increases uniformly from -1.0 mWb to +1.0 mWb. Both segments are straight, and the coil resistance remains constant. A positive induced current is defined by the circulation corresponding to positive induced emf under .

The net signed charge transferred during the complete interval, the total Joule heat generated, and the relationship between current directions in the two segments are:

42 / 50

42. A series RC circuit contains a resistor of and an ideal capacitor of .
During sinusoidal steady operation, the measured current is

The current reference direction is chosen from the resistor towards the capacitor. The capacitor has no DC voltage offset.
The applied source voltage is the sum of the resistor and capacitor voltages under the passive sign convention.
Determine the instantaneous source voltage at , its value at , and the average real power supplied by the source.

43 / 50

43. An ideal inductor is connected in a circuit in which an external source controls the current. The current initially increases in a fixed direction, subsequently becomes constant, and finally decreases without reversing its direction. Assume that the inductance remains constant throughout the process.
Consider the following statements.
Statement I: While the current increases, the self-induced emf opposes the increase in current.
Statement II: While the current decreases, the self-induced emf tends to maintain the existing direction of current.
Statement III: During the constant-current interval, the ideal inductor develops a continuous self-induced emf merely because a nonzero magnetic field exists inside it.
Which statements are correct?

44 / 50

44. A series RC circuit is supplied by a sinusoidal voltage source having angular frequency and RMS voltage .
The capacitor is ideal, and the resistor is ohmic.
During steady operation, an ideal AC voltmeter reads RMS across the capacitor.
A charge-measuring arrangement determines that the maximum magnitude of charge stored on either capacitor plate is .
There is no DC voltage offset across the capacitor.
The capacitance, series resistance, and average real power consumed by the circuit are:

45 / 50

45. Two conducting objects have the same circular outer boundary and are separately placed in an identical magnetic-field arrangement. Object P is a thin conducting wire ring following only the outer boundary. Object Q is a continuous conducting metal disc filling the same circular area. The magnetic field is perpendicular to their planes. Over the left semicircular half, the outward magnetic field increases uniformly at a rate . Over the right semicircular half, the inward magnetic field increases uniformly at the same rate . The fields are externally prescribed and both objects remain stationary.
Which conclusion is correct?

46 / 50

46. An ideal transformer has primary turns and a selectable secondary winding.
Its primary is connected to a fixed sinusoidal RMS source.
Initially, secondary turns are selected and a resistor is connected across the secondary.
In a second experiment, the secondary tap is moved to select turns. At the same time, the resistor is replaced by a resistor.
The primary source voltage, frequency, magnetic coupling and primary turns remain unchanged.
The ratio of final to initial secondary RMS current, ratio of final to initial primary RMS current, and ratio of final to initial average real output powers are:

47 / 50

47. A long air-core solenoid has turns, length and cross-sectional area . A steady current of flows through it. Neglect end effects and assume a uniform magnetic field inside the solenoid. Take and .
The self-inductance of the solenoid and the magnetic energy stored in it are approximately:

48 / 50

48. A primary coil carries a current that is varied by an external controller. A nearby secondary coil has constant mutual inductance and total resistance . Its self-inductance and magnetic feedback are negligible. The primary current follows the graph described below.

The horizontal axis represents time in seconds and the vertical axis represents primary current in amperes. From to , the current rises linearly from to . From to , the current falls linearly from to zero. The positive current reference direction remains fixed throughout.

The ratio of Joule heat produced in the secondary during the first and second intervals and its total algebraic charge transfer over both intervals are:

49 / 50

49. A small circular conducting coil is placed coaxially with a bar magnet. The magnet's north pole faces the coil. The magnet is initially held stationary and then moved toward the coil at a constant prescribed speed. The coil is first tested with its terminals connected through a resistor of resistance . In a second experiment, an additional resistor of resistance is connected in series, doubling the total circuit resistance. The magnet follows exactly the same prescribed motion in both experiments. The magnetic field produced by the induced current is negligible compared with the externally prescribed magnet field.
Which relationship correctly compares the induced emf, current and instantaneous Joule-heating power during corresponding stages of the two experiments?

50 / 50

50. Two stationary coils P and Q are placed in an arrangement having constant mutual inductance .
A current source connected to P increases its current uniformly from zero to in .
The induced emf across the open secondary Q is measured as in magnitude.
The experiment is repeated with the electrical roles interchanged: the current source is connected to Q, and an ideal voltmeter measures the open-circuit induced emf across P.
The current in Q now decreases uniformly from to in .
The geometry and magnetic medium remain unchanged.
The mutual inductance, magnitude of the second induced emf, and physical reason for using the same mutual-inductance coefficient in both directions are:

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top