Magnetic Effects Of Current And Magnetism Mock Test – NEET Physics
GKaim: Measure | Improve | Achieve

Magnetic Effects of Current and Magnetism Mock Test – NEET Physics

Progressive Test — Guest First Round

0%

Magnetic Effects of Current and Magnetism – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. A moving-coil galvanometer rotates about the fixed positive -axis. Its normal operating magnetic field is shaped to provide a radial-field torque about that axis.
An independent uniform magnetic field is added parallel to the galvanometer's rotation axis.
Assume the coil is rigid, its magnetic moment remains in the -plane throughout its permitted rotation, and the bearings prevent rotation about axes other than .
The added field is too weak to alter the radial pole-piece field or the galvanometer's mechanical properties.
Consider the following statements.
Statement I: The added field may produce an additional vector magnetic torque on the coil.
Statement II: The added field produces no torque component about the permitted -axis, so it does not change the ideal equilibrium pointer deflection at a fixed current.
Statement III: Because the added field is perpendicular to the coil's moment, it necessarily increases the pointer deflection by increasing the total magnetic-field magnitude.
Statement IV: The full vector torque exerted on a constrained coil need not be directed entirely along its permitted axis of rotation.
Which statements are correct?

2 / 50

2. A galvanometer with resistance and full-scale current is converted into a ammeter.
The converted instrument is connected in series with an unknown resistor and the internal resistance of a source having emf .
The actual unknown resistor has resistance .
A student measures the current and uses

to estimate the unknown resistor, treating the ammeter as ideal.
What are the ammeter reading and the resistance calculated by the student?

3 / 50

3. A student compares an electric dipole formed by two separated charges with a small permanent bar magnet represented as a magnetic dipole.
The electric dipole moment points from its negative charge towards its positive charge, while the magnetic dipole moment of the bar magnet points from its south end towards its north end.
The student examines their far-field patterns and their responses to uniform external fields.
Consider the following statements.
Statement I: At sufficiently distant axial points on either side of an ideal dipole, the electric field of the electric dipole and the magnetic field of the magnetic dipole point along their respective dipole moments.
Statement II: In their equatorial planes, the electric and magnetic dipole fields point opposite to their respective dipole moments.
Statement III: Splitting a bar magnet into two pieces can isolate a north pole from its associated south pole in the same manner that two separated electric charges can be physically isolated.
Statement IV: In a uniform external field, a permanent magnetic dipole and a rigid electric dipole may experience orientation-dependent torque without a resultant translational force.
Which statements are correct?

4 / 50

4. Two planar coils P and Q are placed separately in the same uniform magnetic field .
Coil P has turns, current , area , and its area normal makes with the field.
Coil Q has turns and half the area of P. Its current magnitude is , and its area normal makes with the field.
The currents are initially chosen so that the two magnetic-torque magnitudes are equal.
The field is then reversed in the experiment with coil Q only, without changing its current or orientation.
Which option correctly gives and the effect of the field reversal on Q?

5 / 50

5. A moving-coil galvanometer has turns, coil area , and radial magnetic field . Its pointer scale has a fixed additive zero-reading offset, although the moving coil itself is mechanically at its zero-deflection position when no current flows.

The horizontal axis represents moving-coil current in microamperes, and the vertical axis represents the indicated angular reading in radians. The straight-line calibration graph passes through and . The mechanical coil deflection is the indicated reading minus the fixed zero offset.

What are the torsional restoring constant and the actual mechanical coil deflection when the current is ?

6 / 50

6. A radial-field moving-coil galvanometer has a linear angular scale and torsional constant

A small unwanted constant torque acts on the coil in the positive-deflection direction, producing a mechanical zero offset. This bias torque does not change when the measured current is reversed.
The instrument is tested with equal and opposite calibration currents:

Applied winding current Observed pointer angle

The angles are measured relative to the engraved zero mark, not relative to the actual zero-current position.
After calibration, an unknown current gives an observed angle of .
What are the true zero-current deflection, the magnitude of the bias torque and the unknown current?

7 / 50

7. A student compares three substances in a controlled magnetic experiment:

Sample P is a weakly diamagnetic solid whose induced magnetisation is approximately temperature-independent over the small temperature interval studied. Sample Q is an ordinary paramagnet whose magnetisation under the same weak applied magnetic intensity decreases as temperature increases. Sample R is a ferromagnetic solid investigated below and above its characteristic transition temperature. The applied magnetic intensity is kept fixed whenever temperature effects are compared, and each sample is tested within the regime specified.

The student proposes these conclusions.
Statement I: If P and Q both have negligible bulk magnetisation when the applied field is removed, that observation alone does not establish identical microscopic mechanisms.
Statement II: The reduction in Q's magnetisation with heating is consistent with increased thermal disorder opposing partial alignment of pre-existing microscopic moments.
Statement III: Above the transition temperature, R must become diamagnetic because its ferromagnetic domains have lost their cooperative order.
Statement IV: Comparing samples at different temperatures without controlling the applied field may give misleading conclusions about the influence of temperature on magnetisation.
Which statements are correct?

8 / 50

8. Three infinitely long straight wires , , and pass perpendicularly through the -plane. Their currents, including directions, are unknown. Three anticlockwise Amperian paths viewed from positive are chosen so that encloses only , encloses and , and encloses all three wires. The measured circulations are given below.

Path Measured circulation

Which set correctly gives the individual wire currents, taking positive values along ?

9 / 50

9. A circular coil of closely wound turns and radius lies in the -plane and carries current anticlockwise when viewed from positive . The coil is centred inside a much longer coaxial solenoid having turns per metre. The solenoid current is adjusted so that the resultant magnetic field at the common centre is zero. Assume both sources are in air and the ideal long-solenoid approximation applies. Take . What must be the solenoid current magnitude and its interior-field direction?

10 / 50

10. A particle carrying charge moves through uniform static electric and magnetic fields. The electric field is

and the magnetic field is uniform but otherwise unspecified. Between two observed positions, the particle undergoes displacement

Assume that the electric and magnetic forces are the only forces acting and that the stated displacement is the actual net displacement between the two positions. What is the change in the particle's kinetic energy?

11 / 50

11. A moving-coil galvanometer has unknown resistance and unknown full-scale current .
An experimenter constructs two ammeters by connecting known shunts separately across the same galvanometer.

Connected shunt Measured full-scale total current

The galvanometer reaches the same maximum angular deflection in both experiments. The shunts are ideal ohmic resistors, and the complete shunt connection is changed between trials.
The galvanometer is then converted into a voltmeter having a full-scale range of , using only a series multiplier.
What are , and the required multiplier?

12 / 50

12. A short current element of directed length is centred at the origin and carries steady current . Two observation points, P and Q, lie on a circle of radius centred at the element.

Point P is at . Point Q is at . Both lie in the -plane. In Trial 1, the current flows along positive . In Trial 2, the current is reversed and its magnitude is doubled. The same two observation points are used in both trials.

Let . Which option correctly gives the elementary magnetic-field vectors at P and Q in Trial 2?

13 / 50

13. Two weakly magnetic specimens P and Q are tested in a fixed applied magnetic intensity , directed along positive . Both remain in their ordinary linear-response regimes.

A graph plots signed magnetisation M on the vertical axis against absolute temperature T on the horizontal axis. Curve P lies entirely below M=0 and is approximately horizontal over the tested temperature interval. Curve Q lies entirely above M=0 and decreases smoothly as T increases. When H is reversed at one fixed temperature, the measured magnetisations of both specimens reverse sign. When the field is removed, neither specimen retains substantial bulk magnetisation.

Which interpretation is best supported by all the observations?

14 / 50

14. A thin conducting wire carries steady current from point to point , where coordinates are in metres. Between these endpoints, it follows an arbitrary bent path lying in the -plane.
The entire wire is immersed in a uniform magnetic field

The wire is subsequently reshaped into a straight segment joining the same endpoints, without changing its current direction or the field.
Which statement correctly gives the resultant magnetic force before and after reshaping?

15 / 50

15. A positively charged particle moves through a uniform magnetic field . Initially, its velocity has equal perpendicular and parallel components:

Its helical trajectory has radius , pitch , and kinetic energy .
In a second independent experiment, the particle enters the same magnetic field with the same total kinetic energy , but its velocity makes an angle of with positive .
What are the ratios of its new helical radius and pitch to their initial values?

16 / 50

16. A moving-coil galvanometer has resistance and full-scale current . It is converted into a voltmeter having selectable and ranges by using two appropriate series multiplier settings.
The instrument is used to measure the voltage across a load connected to an ideal source through a series resistor.

The resistor lies in series between the ideal source and the load. The complete voltmeter is connected in parallel with the load. Only one range is selected at a time. Each selected range uses the same galvanometer, reaches full-scale deflection at , and has its corresponding total input resistance. Assume linear calibration and no source internal resistance beyond the stated series resistor.

What readings are obtained on the two ranges?

17 / 50

17. Two coaxial circular coils have their centres at the origin and lie in the -plane.
Coil P has radius , turn number , and current producing a positive- axial field.
Coil Q has radius , turn number , and an adjustable current producing a negative- axial field.
The current is adjusted so that the resultant field at the point is zero.
What is , and does this adjustment also make the resultant field at the common centre zero?

18 / 50

18. A single circular current loop lies in the -plane, with its centre at the origin. Observer P looks towards the loop from a point on the positive -axis and sees anticlockwise conventional current.
Observer Q simultaneously looks towards the same loop from the negative -axis.
A small bar magnet is to be placed coaxially with the loop so that its magnetic dipole moment has the same direction as the loop's moment.
The current is subsequently reversed while the loop and both observers remain stationary.
Consider the following statements.
Statement I: Before reversal, Q sees clockwise current, even though the two observers examine the same physical current.
Statement II: Before reversal, the loop's magnetic moment points along positive , and the equivalent bar magnet must have its north pole towards positive .
Statement III: Reversing the current changes what both observers see, but does not change the direction of the loop's magnetic moment because its plane is fixed.
Statement IV: At distant axial points on either side of the loop, the magnetic field due to the loop reverses when the current reverses.
Which statements are correct?

19 / 50

19. A moving-coil galvanometer has resistance and current sensitivity . It is connected directly to a real voltage source having emf and internal resistance . The galvanometer operates in its linear range.
A student incorrectly calculates the deflection by assuming that the complete source emf appears directly across the moving coil.
Which pair correctly gives the actual deflection and the potential difference across the moving coil?

20 / 50

20. Two infinitely long parallel wires pass through and , where .
Wire P carries current along positive , while Q carries current along negative .
Let

The magnetic field is examined at the midpoint and at .
Which option correctly gives the resultant fields at M and N and the force per unit length on P?

21 / 50

21. A positive particle of known charge moves through an unknown uniform magnetic field. Two controlled velocity settings are used, with the same speed magnitude .

Trial Particle velocity Measured magnetic-force vector
1
2

Assume that magnetic force is the only measured force and that both velocity settings are realised in the same spatially uniform field. Which magnetic-field vector is consistent with both trials?

22 / 50

22. Three infinitely long parallel wires are placed at the vertices of an equilateral triangle of side . All carry equal current along positive , perpendicular to the triangle's plane. Let be the circumcentre of the triangle, and let

be the magnetic attraction force per unit length between any pair of wires.
Which statement correctly gives the resultant magnetic force per unit length on one wire and the resultant magnetic field at ?

23 / 50

23. A moving-coil galvanometer is designed with two distinct magnetic components: a magnet assembly that provides a persistent magnetic field, and a shaped core inside the moving coil that helps produce an approximately radial field geometry.

The magnet assembly must retain its magnetisation when the galvanometer is stored without any exciting current. The shaped central core should support a strong, well-directed magnetic field and respond readily when its magnetic state is changed during manufacturing or adjustment. The coil is suspended by a torsion spring, and its normal operating current is small.

Consider the following statements.
Statement I: A suitable hard magnetic material may be used for the persistent-field magnet assembly, while soft iron is suitable for the shaped central core.
Statement II: The radial-field geometry helps maintain an approximately constant magnetic torque per unit coil current throughout the intended range of angular deflection.
Statement III: Replacing the soft iron core with a strongly remanent hard magnetic core must necessarily improve scale linearity, regardless of the resulting field geometry.
Statement IV: If the radial field magnitude is increased while , and the torsional constant remain unchanged, the galvanometer's current sensitivity increases.
Which statements are correct?

24 / 50

24. A galvanometer has resistance and full-scale current .
It is separately converted into an ammeter and a voltmeter by adding appropriate resistances. Assume ideal connecting leads and ordinary linear moving-coil operation.
Match the arrangements in List I with the correct properties in List II.

List I Arrangement List II Property
P Galvanometer with a small parallel shunt 1 Large input resistance; connected across the measured element
Q Galvanometer with a large series multiplier 2 Small effective resistance; connected in series with the measured branch
R Ideal ammeter 3 Zero resistance; no insertion voltage drop
S Ideal voltmeter 4 Infinite resistance; draws no current

Which matching is correct?

25 / 50

25. Two closely wound circular coils share a common centre and lie in the -plane.
Coil P has turns, each of radius , and carries anticlockwise when viewed from positive .
Coil Q has turns, each of radius , and carries an adjustable clockwise current .
The current is adjusted so that the RESULTANT magnetic field at the common centre is zero.
The entire assembly is then placed in a separately maintained uniform magnetic field , while the coil planes remain fixed.
Assume the turns are sufficiently close for the usual central-field formulas to apply.
What outer-coil current is required, and what magnetic torque acts on the assembly after the central-field cancellation has been achieved?

26 / 50

26. A rectangular moving-coil galvanometer has turns. Each turn has two active vertical sides of length , separated by . Its shaped magnetic pole pieces produce a radial magnetic field of magnitude , perpendicular to the active current-carrying sides throughout the permitted motion.
The instrument carries a steady current of . Its torsional restoring constant is . Assume that all turns experience the same magnetic torque and that the galvanometer has reached equilibrium.
What are the magnitude of the magnetic force on one active side, counting all turns, and the equilibrium angular deflection?

27 / 50

27. Three initially unidentified magnetic specimens P, Q and R are tested in a magnetic field directed first along positive and then along negative .
The field magnitude is the same in both directions, and each specimen remains at a fixed temperature throughout.
The observed magnetisations are:

Specimen Under a moderate applied field After reversing to an equal moderate field After removing the field
P Weakly along Weakly along Negligible
Q Weakly along Weakly along Negligible
R Strongly along Still substantially along Substantial magnetisation along

Assume P and Q are ordinary isotropic weak magnetic materials, while R is known to contain cooperative magnetic domains.
Which conclusion is most defensible?

28 / 50

28. Consider the following Assertion (A) and Reason (R).
Assertion (A): When the radius of a circular current loop is doubled while its current remains unchanged, the magnetic field at its centre becomes half, although the Biot–Savart law contains an inverse-square distance factor.
Reason (R): On doubling the loop radius, the total length of the current-carrying circular path also doubles, so the vector sum of elementary magnetic-field contributions varies inversely with the loop radius.
Choose the correct option.

29 / 50

29. A moving-coil galvanometer has resistance and full-scale current .
It is converted into an ammeter with a full-scale range by connecting a suitable shunt across the winding.
A circuit originally consists of an ideal battery and a resistor in series. The converted ammeter is inserted in series to measure the current.
Ignore connecting-lead resistance.
What shunt resistance is required, what is the effective resistance of the converted ammeter, and by what percentage does inserting it reduce the original circuit current?

30 / 50

30. A moving-coil galvanometer has resistance and reaches full-scale deflection at a current of .
It is to be converted into an ammeter with selectable full-scale ranges of and .

A selector switch connects one of two independent shunts directly across the galvanometer winding. In the lower-current range, shunt P is used. In the higher-current range, shunt Q replaces P completely; the two shunts are never connected simultaneously. Both ranges use the same full-scale galvanometer current and are calibrated for the total current entering the instrument.

Which option correctly gives the shunt resistances and the ratio of the two complete ammeter resistances, higher range to lower range?

31 / 50

31. Two infinitely long parallel wires pass through and , where . They carry currents and , respectively, both along positive .
An additional uniform magnetic field is applied so that the resultant magnetic force per unit length on wire becomes zero. The field is uniform at both wires and does not alter their steady currents.
Define

What additional magnetic field is required, and what is the resultant force per unit length on wire ?

32 / 50

32. Two very short current elements are positioned at diametrically opposite points of a circle of radius lying in the -plane. Their elementary fields are added at an axial observation point. Use the arrangement described below.

Element is centred at , has length , and carries current along positive . Element is centred at , has the same length , and carries current along negative . Both currents are tangent to the reference circle in its anticlockwise sense as viewed from positive . The observation point is . The elements are independently supplied, and their connecting leads are neglected. Assume .

If the resultant elementary field is , what is ?

33 / 50

33. A radial-field moving-coil galvanometer has magnetic torque coefficient

and torsional restoring constant

The permitted maximum angular deflection is .
A second galvanometer is constructed with the same coil geometry, magnetic field and winding resistance, but its restoring constant is twice the original value.
Both instruments are fitted with the SAME series multiplier and tested under the same steady applied voltage, within both instruments' operating ranges.
Consider the following statements.
Statement I: The second galvanometer has half the first galvanometer's current sensitivity.
Statement II: The second galvanometer has twice the first galvanometer's permitted full-scale coil current.
Statement III: With the same total series resistance, the two instruments have the same voltage sensitivity because the applied voltage is unchanged.
Statement IV: The second instrument's full-scale voltage range with the common multiplier is twice that of the first.
Which statements are correct?

34 / 50

34. Three specimens of magnetic materials are investigated under a microscope and by bulk magnetic measurements.

Specimen P is initially a ferromagnetic solid with numerous domains. Within each domain, atomic magnetic moments are approximately aligned, but the domain magnetisation directions are distributed so that the specimen has negligible resultant magnetic moment. A moderate magnetic field is applied along positive x, causing some favourably oriented domains to grow. Specimen Q is an ordinary paramagnet whose microscopic magnetic moments have largely random orientations before a field is applied. Specimen R is an ordinary diamagnet exhibiting an induced response under a weak applied field.

Consider the following statements.
Statement I: The initially negligible bulk magnetisation of P does not imply that its individual domains lack magnetic moments.
Statement II: The increased bulk magnetisation of P can involve growth and reorientation of domains rather than the creation of atomic magnetic moments by the external field.
Statement III: Q and P must show the same cooperative domain mechanism because both possess microscopic magnetic moments.
Statement IV: R's weak induced magnetisation can oppose the applied field even when P and Q tend to magnetise along it.
Which statements are correct?

35 / 50

35. An infinitely long straight conductor passes through the origin and carries current along positive .
Two circular Amperian paths lie in the -plane:

Path is a circle of radius centred at the conductor. Path is a circle of radius centred at , so the conductor lies inside but not at the centre of . Both paths are initially traversed anticlockwise when viewed from positive . For each path, the average tangential magnetic-field component means , where is that path's total length.

After measuring both averages, the traversal of alone is reversed.
Which option correctly gives the original two averages and the new average for reversed ?

36 / 50

36. A circular coil has turns, radius , and carries current . Its magnetic field at a point on the axis, at distance from its centre, has magnitude . The coil is replaced by another circular coil with the same number of turns and current but radius . The observation point remains at the same fixed physical position, a distance from the common centre. If the new field magnitude is , what is ?

37 / 50

37. A charged particle enters a uniform-field region with

Its charge is . The particle's entry velocity can be chosen freely in three dimensions.
An experimenter wants to minimise the magnitude of the instantaneous resultant electromagnetic force by choosing the entry velocity. The fields themselves cannot be changed.
Which option correctly gives the minimum possible force and the conditions on the velocity components?

38 / 50

38. An infinitely long straight wire carrying unknown current along either positive or negative is placed in a region containing an unknown uniform background magnetic field parallel to the -axis. Two probes are positioned on the positive -axis.

The first probe, at distance from the wire, records . The second probe, at distance , records . The background field is unchanged between the measurements. The magnetic-field contribution of the straight wire obeys the ideal infinite-wire relation. Take .

What are the current direction and the uniform background-field component?

39 / 50

39. A straight conductor of length carries current in a uniform magnetic field of magnitude . Initially, the angle between the current direction and the magnetic field is . The conductor is rotated about its midpoint until the angle becomes , while its current is simultaneously reduced to half its original magnitude.
In both configurations, the conductor is constrained to rotate within the same plane containing the magnetic-field direction, and its current direction has a positive component along the same transverse axis, so the magnetic-force direction remains unchanged. What happens to the magnetic-force magnitude?

40 / 50

40. A positive particle of mass and charge passes through the centre of a circular coil with velocity . The coil lies in the -plane, has radius , and carries steady current anticlockwise when viewed from positive .
The particle experiences an instantaneous magnetic-force magnitude .
The circular coil is then replaced by a geometrically similar coil having twice the radius and three times as many turns. The new coil carries the same current in the opposite sense. The particle is independently brought to the new coil centre with velocity .
Assume the turn geometries are sufficiently close that the circular-coil centre formula applies. What is the final magnetic-force vector in terms of ?

41 / 50

41. A short magnetic dipole is fixed at the origin with magnetic moment , where is unknown. A separately maintained uniform field , with unknown signed , is present.
The signed resultant magnetic field is measured at two points on the positive -axis:

Distance from dipole centre Measured

The measurements are plotted with signed , in microtesla, on the vertical axis and , in , on the horizontal axis.
Use .
What are the dipole moment magnitude, the uniform external field and the positive axial distance where the resultant field vanishes?

42 / 50

42. A short magnetic dipole is placed in a uniform field

Its magnetic moment vector

is initially unknown.
Two simultaneous measurements are made:

and

where .
The field is then reversed while the magnetic dipole remains fixed.
Which option correctly gives the dipole moment and the torque immediately after field reversal?

43 / 50

43. Two infinitely long parallel wires carry unknown positive currents and , both directed along positive . Wire passes through , and wire through . A magnetic-field probe at their midpoint measures

The attractive magnetic force per unit length between the wires is measured to be

Take . Determine the two currents and the direction of force on the left wire.

44 / 50

44. The axial magnetic-field magnitude of a circular coil is measured at several positions. Instead of plotting directly against axial distance , a student constructs a transformed graph.

The horizontal axis represents in , while the vertical axis represents in the corresponding SI-derived units. The measured points lie on a straight line having positive slope and positive vertical intercept . Experimentally, . The coil has turns, and its central magnetic field magnitude is . The current is steady, and .

What current flows through the coil?

45 / 50

45. A circular coil of closely wound turns and radius carries current . Its central magnetic field is . The magnetic field at an axial point , located at distance from the centre, is measured to be . The current direction is unchanged, and the axial field retains its original direction. What is the distance in terms of ?

46 / 50

46. A radial-field moving-coil galvanometer has winding resistance , magnetic torque coefficient , and torsional restoring constant .
A shunt is initially connected directly across the galvanometer winding. A regulated current source supplies a total current of to the parallel combination.
In a second steady-state experiment, the shunt is replaced by , and the total current is reversed, with magnitude .
Assume the instrument response is linear and neither experiment exceeds its permissible winding current.
What are the initial and final equilibrium deflections? Take the initial current direction through the winding as positive.

47 / 50

47. A laboratory must select materials for two devices.

Device P is an electromagnet core that must become strongly magnetised when current is switched on and lose most of its magnetisation when current is switched off. Device Q is a compass needle that must retain substantial magnetisation after the original magnetising field has been removed. Candidate materials include soft iron, a suitable hard magnetic alloy such as Alnico, aluminium and copper. Both devices operate under ordinary conditions, with no unusual temperature-induced phase changes.

Consider the following statements.
Statement I: Soft iron is appropriate for P because it is a soft ferromagnetic material whose magnetisation can respond readily to changes in the applied field.
Statement II: Alnico is appropriate for Q because its useful retained magnetisation makes it suitable for a permanent magnet.
Statement III: Aluminium is a better substitute for soft iron in P because all paramagnets exhibit stronger magnetisation than ferromagnets when an external field is applied.
Statement IV: The distinction between soft and hard magnetic behaviour refers primarily to the response and retention of magnetisation, not to whether the material can be easily scratched or mechanically bent.
Which statements are correct?

48 / 50

48. A positive particle enters a region of uniform magnetic field . The field is present only in the strip , where . The particle enters at the origin with speed , making an angle above the positive -axis.

The field region extends indefinitely along the -direction and is bounded by the vertical lines and . The particle enters through at with velocity components and . The magnetic field points out of the -plane. The particle is followed until its first exit from the strip.

Which statement correctly describes the particle's first exit point and its velocity direction there?

49 / 50

49. A very short current element of length is centred at the origin and carries current along the positive -axis. A magnetic-field probe is moved along the straight line , where , while its -coordinate is varied continuously.

The horizontal axis represents the signed coordinate , and the vertical axis represents the signed elementary magnetic-field component . The current, element length and positive transverse distance remain fixed. The graph is obtained from the Biot–Savart law without changing the direction of the current.

Which description of the graph is correct?

50 / 50

50. Two infinitely long straight wires are perpendicular to the -plane. One passes through and carries current along positive . The other passes through and carries equal current along negative , where .

A circular Amperian path lies in the -plane, is centred at the origin, has radius greater than , and encloses both wires. It is traversed anticlockwise when viewed from positive . The magnetic field is also examined at the origin , midway between the wires. Treat the wires as infinitely long and negligibly thin.

Which pair correctly gives the magnetic field at and the circulation around the specified path?

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top