Hydrocarbons Mock Test – NEET Chemistry
GKaim: Measure | Improve | Achieve

Hydrocarbons Mock Test – NEET Chemistry

Progressive Test — Guest First Round

0%

Hydrocarbons – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Three unbranched alkynes have molecular formula :
P: Hex-1-yne.
Q: Hex-2-yne.
R: Hex-3-yne.
Each undergoes three separate tests:
I. Reaction with sufficient sodamide to remove any terminal acetylenic hydrogen.
II. Hydration using dilute sulphuric acid and mercuric sulphate, followed by complete keto–enol tautomerisation.
III. Selective hydrogenation using Lindlar's catalyst.
Assume that the ordinary hydration of an unsymmetrical internal alkyne may give carbonyl products corresponding to either orientation of water addition.
An unknown sample gives no ammonia in Test I, gives only hexan-3-one as its constitutional carbonyl product in Test II, and produces a cis alkene capable of geometrical isomerism in Test III.
Which conclusion correctly identifies the sample and its selective-hydrogenation product?

2 / 50

2. An energy-profile experiment compares two competing electrophilic nitration pathways of a substituted benzene ring. The incoming nitro group may occupy position X or position Y.

Both pathways begin from the same reactants at potential energy zero. The highest transition state along pathway X is at +76 kJ mol−1, and its final substituted product is at −18 kJ mol−1. The highest transition state along pathway Y is at +92 kJ mol−1, and its final substituted product is at −35 kJ mol−1. The experiment is conducted under kinetic-control conditions, and both pathways have otherwise comparable reaction-prefactor contributions. The final products do not interconvert during the experiment.

A student claims that Y must be the principal product because it has the lower final potential energy.
Which statement correctly evaluates the claim using the supplied energy data?

3 / 50

3. A carbon-labelled sample of propene has the structure:

Only the central carbon is enriched in ; the other carbon atoms contain ordinary carbon.
Three independent experiments are performed:
P: Complete reductive ozonolysis.
Q: Addition of ordinary HBr under peroxide-free conditions, giving the principal Markovnikov product.
R: Addition of ordinary HBr under suitable peroxide-initiated radical-chain conditions, giving the principal anti-Markovnikov product.
Assume that the carbon skeleton does not rearrange and that the labelled carbon remains attached to its original neighbouring carbon atoms unless the specified ozonolysis cleaves their bond.
Which statement correctly tracks the labelled carbon?

4 / 50

4. An unknown hydrocarbon X undergoes complete catalytic hydrogenation to a saturated acyclic hydrocarbon with molecular formula .
One mole of X consumes exactly two moles of hydrogen during hydrogenation.
The original X also consumes two moles of bromine under conditions permitting complete addition across every carbon–carbon double or triple bond.
Which statement correctly evaluates the possible structures of X?

5 / 50

5. Consider the following statements concerning the peroxide effect during addition of hydrogen halides to alkenes.
Statement I: HBr can undergo a free-radical addition pathway in the presence of suitable organic peroxide.
Statement II: The peroxide effect is not ordinarily observed for HCl because abstraction of hydrogen from the relatively strong H–Cl bond does not favour the corresponding radical propagation step.
Statement III: The peroxide effect is not ordinarily observed for HI because iodine radicals readily combine to form iodine rather than sustaining the required alkene-addition chain.
Statement IV: The absence of the peroxide effect for HCl and HI implies that these hydrogen halides cannot add to alkenes under any conditions.
Which statements are correct?

6 / 50

6. Three trimethylbenzene constitutional isomers are compared:
P: 1,2,3-Trimethylbenzene.
Q: 1,2,4-Trimethylbenzene.
R: 1,3,5-Trimethylbenzene.
Each compound undergoes two independent idealised experiments.
Experiment I: Controlled electrophilic monobromination of the aromatic ring, with substitution permitted at every constitutionally distinct remaining ring-hydrogen position.
Experiment II: Controlled photochemical monochlorination at a benzylic methyl carbon, with substitution permitted at every constitutionally distinct methyl group.
Assume one substitution per molecule in either experiment, no rearrangement and no stereochemical distinctions.
Which option correctly gives the numbers of constitutional products from Experiments I and II for P, Q and R, respectively?

7 / 50

7. A pure sample of benzene undergoes controlled electrophilic bromination using . The monobrominated product is isolated and then subjected to Friedel–Crafts alkylation using chloromethane and anhydrous .
Assume that any successful second substitution follows the ordinary directive influence of bromine. Exact ortho-to-para product proportions are not specified.
Which statement correctly predicts the second-stage positional preference and explains why the overall reaction may be less facile than alkylation of benzene itself?

8 / 50

8. Consider two conjugated trienes:
P: Octa-2,4,6-triene,
Q: Nona-2,4,6-triene,
Each of the three double bonds in both molecules can independently possess two geometrical configurations. Count distinguishable geometrical isomers, excluding conformational differences arising from single-bond rotation.
Which pair correctly gives the numbers of geometrical isomers of P and Q, respectively?

9 / 50

9. An acyclic hydrocarbon X has the structure:

It is separately subjected to:
Process P: Reductive ozonolysis using , followed by .
Process Q: Complete catalytic hydrogenation using .
Which statement correctly gives the organic products and the geometrical-isomerism capability of the original hydrocarbon?

10 / 50

10. Benzene is nitrated using a mixture of concentrated nitric acid and concentrated sulphuric acid.
A student proposes three changes to the ordinary mechanism:
P: Treat nitrate ion, , rather than nitronium ion, , as the principal attacking electrophile.
Q: Add substantial water to the nitrating mixture and assume that this necessarily increases the concentration of nitronium ion because water is a polar solvent.
R: Allow the initially formed arenium ion to lose a proton from the carbon at which the nitro group attached, thereby restoring the aromatic ring.
Which evaluation is chemically justified?

11 / 50

11. A fixed collection of 24 ethyne molecules is subjected to two competing polymerisation pathways under independently controlled conditions.
Route P: Exactly 12 ethyne molecules form one ideal, open-chain conjugated polyene. Assume that the original two-carbon units remain identifiable, that the carbon skeleton is unbranched, that the chain contains the maximum possible number of nonadjacent formal C=C bonds, and that one additional H2 molecule supplies the two hydrogen atoms needed to cap its terminal valences.
Route Q: All remaining ethyne molecules undergo quantitative cyclic trimerisation to benzene.
The isolated Route P product is then treated with excess bromine under conditions that add across every ordinary C=C bond without substitution or skeletal cleavage. Benzene from Route Q is not brominated under these conditions.
Which option correctly gives the molecular formula of the open-chain polyene, the number of benzene molecules formed and the number of bromine molecules consumed by complete addition to the polyene?

12 / 50

12. A student makes the following claim:
"Because ethane has three equivalent hydrogen atoms attached to each carbon, a rotation of about its carbon–carbon bond must change an eclipsed conformation into a staggered conformation."
Which response correctly evaluates this claim?

13 / 50

13. Bromination of benzene is compared under two hypothetical sets of conditions that lead to the same monobromobenzene product.

Potential energy is plotted vertically against reaction coordinate horizontally. Both profiles begin with the same benzene and bromine reactants at 0 kJ mol−1 and terminate at the same bromobenzene-containing product state at −18 kJ mol−1. In Profile P, an uncatalysed pathway has its highest electrophilic-attack transition state at +124 kJ mol−1. In Profile Q, addition of a suitable Lewis-acid catalyst permits a different electrophile-generation and attack pathway whose highest transition state is at +79 kJ mol−1. Assume that these are alternative paths between the same overall initial and final chemical states and that the catalyst is regenerated.

Which statement correctly interprets the effect of the Lewis acid and the relationship between activation energy and reaction enthalpy?

14 / 50

14. Ordinary 1,3,5-trimethylbenzene contains three equivalent methyl substituents at ring positions C1, C3 and C5.
An isotopically labelled derivative X is prepared in which only the carbon atom of the methyl group at C1 is carbon-13, while all other atoms retain their ordinary isotopic compositions:

The structures of the three methyl groups and the benzene ring remain chemically otherwise unchanged.
Two independent monosubstitution experiments are conducted:
P: Replacement of exactly one aromatic ring hydrogen by bromine.
Q: Replacement of exactly one benzylic methyl hydrogen by chlorine.
Count constitutionally different isotope-labelled products as distinct, but do not count isotope effects on reaction rates or stereochemical differences.
Which statement correctly compares the numbers of constitutional monosubstitution products from ordinary unlabelled 1,3,5-trimethylbenzene and from X?

15 / 50

15. A sample of ethyne is burnt with exactly oxygen.
Assume that all the hydrogen is converted into water, all the carbon is converted into a mixture containing only carbon monoxide and carbon dioxide, and no soot or unreacted ethyne remains. All supplied oxygen is consumed.
Which option correctly gives the amounts of CO, and water formed, together with the additional oxygen that would have been required for complete conversion of the original ethyne into carbon dioxide and water?

16 / 50

16. A student prepares a Sawhorse representation of ethane and then converts it into a Newman projection.

In the Sawhorse representation, the carbon–carbon bond is drawn as an oblique line. The front carbon is at its lower end and the rear carbon at its upper end. The three carbon–hydrogen bonds attached to the rear carbon are displaced by around the carbon–carbon axis relative to those attached to the front carbon. The student then views the same molecule directly from the front-carbon end without rotating either carbon.

Which Newman description must correspond to the stated Sawhorse arrangement?

17 / 50

17. Three aromatic hydrocarbons are subjected independently to idealised controlled monobromination under suitable electrophilic-substitution conditions:
P: Benzene.
Q: Naphthalene, comprising two fused benzene-like six-membered rings.
R: Biphenyl, comprising two benzene rings joined by one ordinary carbon–carbon single bond.
Assume that every constitutionally distinct aromatic hydrogen position can undergo bromine substitution and that stereochemical or conformational distinctions are not counted.
Which option correctly gives the numbers of constitutionally distinct monobrominated organic products obtainable from P, Q and R, respectively?

18 / 50

18. Two separate samples, each containing of ethyne, undergo the following complete-conversion sequences.
Route P: Cyclic trimerisation to benzene, followed by complete catalytic hydrogenation of benzene to cyclohexane.
Route Q: Direct complete catalytic hydrogenation of ethyne to ethane.
Assume quantitative conversion and no competing reactions.
Which option correctly gives the amounts of hydrogen consumed and the masses of final saturated organic products in Routes P and Q, respectively?
Use and .

19 / 50

19. An experimental mixture contains only ethene and propene.
Its total amount is .
A representative portion equivalent to the entire mixture undergoes complete reductive ozonolysis. Exactly of ethanal is obtained, together with methanal.
Two other identical portions are used in separate experiments:
P: The ethene and propene components are separated and each undergoes quantitative ideal addition polymerisation.
Q: The original monomers are completely hydrogenated without side reactions.
Assume negligible polymer end-group masses.
Which option correctly gives the masses of polyethene and polypropene formed in P and the hydrogen consumed in Q?
Use , .

20 / 50

20. A sample of ethyne is converted quantitatively into disodium ethynide by successive reaction with exactly of sodium metal under dry conditions.
The isolated disodium ethynide is subsequently treated with sufficient water to regenerate ethyne and form sodium hydroxide.
Assume that no side reactions occur and that the sodium used in the first stage does not directly encounter water.
Which statement correctly gives the net reaction after cancellation of the regenerated ethyne and the amounts of hydrogen gas and sodium hydroxide formed?

21 / 50

21. A sample of 2,2,4-trimethylpentane is subjected to controlled monochlorination. The supplied relative substitution rates per hydrogen atom are:
Primary : Secondary : Tertiary .
Assume that product formation is proportional to hydrogen count multiplied by per-hydrogen reactivity and that no rearrangement occurs. Which statement correctly identifies the hydrogen class contributing the largest combined amount of monochlorinated products and the substitution site producing the single most abundant constitutional monochloro product?

22 / 50

22. In an idealised monochlorination of 2-methylbutane, the relative substitution rates per individual hydrogen atom are supplied as:
Primary hydrogen : Secondary hydrogen : Tertiary hydrogen .
Assume that only monochlorinated products form, that these relative rates remain constant, and that the product fractions are proportional to the number of available hydrogen atoms multiplied by their respective per-hydrogen substitution rates.
What fraction of the total monochlorinated organic product corresponds to substitution at the tertiary hydrogen?

23 / 50

23. A mixture contains only benzene and toluene. The total amount of hydrocarbon molecules is .
The mixture undergoes complete combustion in a sufficient supply of oxygen, forming only carbon dioxide and water. The experiment consumes exactly of oxygen.
Assume quantitative combustion and no carbon monoxide formation.
Which option correctly gives the original amounts of benzene and toluene and the amount of carbon dioxide produced?

24 / 50

24. Three independent samples of ethane are initially in the staggered conformation. In each sample, the front and rear carbons are rotated simultaneously about their common carbon–carbon bond axis, as viewed from the same fixed direction. Clockwise rotations are taken as positive and anticlockwise rotations as negative.
For sample P, the front carbon rotates and the rear carbon rotates .
For sample Q, both carbons rotate .
For sample R, the front carbon rotates and the rear carbon rotates .
Assume that the torsional potential energy increases continuously as the relative bond offset decreases from (staggered) to (eclipsed). Which order correctly compares their final torsional potential energies?

25 / 50

25. Two constitutional isomers of butane are separately subjected to controlled monochlorination under the same idealised conditions.
P: Butane, .
Q: 2-Methylpropane, .
For this experiment, the relative substitution rates per individual hydrogen atom are supplied as primary : secondary : tertiary . Assume that product amounts are proportional to hydrogen multiplicity multiplied by the corresponding per-hydrogen rate.
Which option correctly gives the numbers of constitutional monochlorination products obtainable from P and Q and the fractions formed by substitution at their most reactive hydrogen classes?

26 / 50

26. A student compares the directing effects of a methyl group and a nitro group during further electrophilic substitution of monosubstituted benzene rings.
For each substrate, number the ring carbon bearing the original substituent as C1.
The following simplified arenium-ion charge-location patterns are supplied:

Position of incoming electrophile Important arenium-ion positive-charge locations
Ortho attack at C2 C1, C3 and C5
Meta attack at C3 C2, C4 and C6
Para attack at C4 C1, C3 and C5

Which statement correctly explains why methylbenzene and nitrobenzene generally display different substitution orientations?

27 / 50

27. Consider the following statements about addition of hydrogen halides to propene.
Statement I: In the absence of peroxide, the principal product of HBr addition is 2-bromopropane.
Statement II: In the presence of suitable peroxide, HBr can give 1-bromopropane through a free-radical chain mechanism.
Statement III: The peroxide effect is generally observed with HCl and HI in the same way as with HBr.
Statement IV: During peroxide-assisted HBr addition, the preferred bromine-radical addition step produces a secondary carbon radical rather than a primary carbon radical.
Which statements are correct?

28 / 50

28. Two dibromoalkanes are subjected separately to intramolecular Wurtz coupling using sodium in dry ether:
P: 1,3-Dibromopropane, .
Q: 1,4-Dibromobutane, .
Assume that each molecule reacts exclusively by closure of its own carbon chain, forming one new C–C sigma bond between the two original bromine-bearing carbons, with no intermolecular coupling or other reactions.
The isolated hydrocarbons are then tested for ordinary addition of one equivalent of hydrogen under conditions that preserve saturated carbon rings without ring opening.
Which statement correctly identifies the products and explains their common general molecular formula?

29 / 50

29. An idealised polymer mixture contains only polyethene and polypropene, with a combined mass of . Structural analysis establishes that the mixture contains of carbon atoms specifically belonging to methyl side groups attached directly to the polymer backbones.
Assume that every polypropene repeating unit contributes exactly one such methyl carbon, while polyethene contributes none. Polymer end-group masses are neglected.
Which option correctly gives the mass of polypropene in the mixture and the total amount of backbone carbon atoms in both polymers?
Use and .

30 / 50

30. Four acyclic monoalkenes are considered under ordinary peroxide-free HBr-addition conditions:
P: Hex-1-ene
Q: Hex-2-ene
R: 2-Methylpent-1-ene
S: 2-Methylpent-2-ene
Use the usual carbocation-degree comparison without assuming any additional quantitative kinetic information.
Which statement correctly identifies a definite principal product and a limitation of that comparison?

31 / 50

31. The following three molecules have the same molecular formula, :
P: Pent-2-ene.
Q: Cyclopentane.
R: Methylcyclobutane.
A chemist performs two independent tests:
I. Controlled catalytic hydrogenation without opening saturated carbon rings.
II. Complete combustion in excess oxygen.
Consider the following statements.
Statement I: All three require the same amount of oxygen per mole for complete combustion.
Statement II: Only P consumes hydrogen in Test I, even though all three have the same degree of hydrogen deficiency.
Statement III: After Test I, the products of Q and R become constitutionally identical because both are saturated cyclic hydrocarbons.
Statement IV: The total number of sigma bonds in Q exceeds that in P by one, even though their molecular formulas are identical.
Which statements are correct?

32 / 50

32. A chemist wants to prepare 2-methylpropane from a suitable starting compound. Two approaches are considered.
Route P: Heating the sodium salt of an appropriate carboxylic acid with soda lime.
Route Q: Performing symmetrical Wurtz coupling using only one type of alkyl bromide in dry ether.
Which statement correctly evaluates the feasibility of these approaches?

33 / 50

33. Three aromatic hydrocarbons have molecular formula :
P: .
Q: .
R: .
Each is subjected separately to complete reductive ozonolysis of its nonaromatic side-chain double bond using , while the benzene ring remains unchanged.
An unknown sample produces benzaldehyde and ethanal as its only organic ozonolysis products. Complete catalytic hydrogenation of an identical sample, under conditions preserving the aromatic ring, gives propylbenzene.
Which option correctly identifies the unknown compound and predicts whether its original side-chain double bond permits geometrical isomerism?

34 / 50

34. A student compares the photochemical halogenation of alkanes using fluorine, chlorine, bromine and iodine. Consider the following statements.
Statement I: Fluorination is generally extremely vigorous and may be difficult to control.
Statement II: Bromination is generally slower than chlorination and is usually more selective towards the formation of the more stable carbon-centred radical.
Statement III: Iodination proceeds as readily as chlorination because the iodine–iodine bond is relatively weak.
Statement IV: Under comparable radical-substitution conditions, tertiary hydrogen atoms are generally more reactive towards halogen abstraction than secondary or primary hydrogen atoms.
Which statements are correct?

35 / 50

35. Two projections of ethane are compared by changing the direction of observation along the same carbon–carbon bond.

Projection P is a sawhorse representation viewed obliquely from carbon A towards carbon B. The front and rear hydrogen bonds are staggered, with the projected rear bonds midway between successive front bonds.
Projection Q is obtained by viewing the same unchanged molecular arrangement from the opposite end, carbon B towards carbon A, and drawing its Newman projection. The viewing direction is reversed, but neither carbon nor its attached hydrogens is physically rotated relative to the other.

Which statement correctly describes Q and the physical change between P and Q?

36 / 50

36. Two constitutional isomers of chloropropane are isolated separately:
P: 1-Chloropropane
Q: 2-Chloropropane
Each compound undergoes exactly one additional photochemical chlorine substitution, replacing one remaining hydrogen atom with chlorine. Assume that substitution at every nonequivalent hydrogen position is possible, carbon connectivity remains unchanged, and stereoisomers are not counted separately.
Which option correctly gives the numbers of constitutionally distinct dichlorinated products obtainable from P and Q, respectively?

37 / 50

37. Four common electrophilic aromatic substitution reactions are listed.

Reaction Reagent combination
P Benzene with concentrated
Q Benzene with and anhydrous
R Benzene with and anhydrous
S Benzene with and anhydrous

For this question, use the conventional simplified electrophile representations employed in the NCERT mechanism discussion.
Which option correctly matches the reaction, attacking electrophile and organic product?

38 / 50

38. Two normal alkanes are passed separately over suitable alumina-supported oxide catalysts under conditions favouring complete aromatisation without side reactions:
P: n-hexane is converted into benzene.
Q: n-heptane is converted into toluene.
The aromatic products are combined and separated from all hydrogen evolved. The aromatic mixture then undergoes controlled mononitration in which exactly of the benzene and exactly of the toluene react.
Assume ordinary toluene ortho/para direction, no further nitration and quantitative isolation of the stated products.
Which option correctly gives the total hydrogen liberated during aromatisation, the mass of the aromatic mixture before nitration, and the combined amount of mononitrated aromatic products?
Use and .

39 / 50

39. Consider the following statements about ethane and ethene.
Statement I: Rotation about the carbon–carbon single bond of ethane can produce different conformations without changing the connectivity of atoms.
Statement II: Rotation about the carbon–carbon double bond of ethene is similarly possible without disturbing its bond.
Statement III: Staggered and eclipsed ethane have identical molecular formulas and carbon–hydrogen bond connectivity.
Statement IV: The energy difference between staggered and eclipsed ethane arises from the formation and breaking of carbon–hydrogen covalent bonds.
Which statements are correct?

40 / 50

40. An unknown internal alkyne X has molecular formula . It does not undergo the characteristic sodium-alkynide-forming reaction with sodamide because neither triply bonded carbon carries hydrogen.
On complete catalytic hydrogenation, X gives pentane.
Under suitable mercuric sulphate and dilute sulphuric acid hydration conditions, two constitutional ketone products are possible because water can add in two different orientations across the original triple bond.
Which statement correctly identifies X and the two possible carbonyl products?

41 / 50

41. A mixture contains only cyclohexene, , and hex-1-ene, .
A sample undergoes complete reductive ozonolysis under conditions that cleave the only C=C bond in each molecule, preserve all original C–C single bonds and retain aldehyde carbonyls without further oxidation.
Analysis shows that exactly distinct carbonyl-containing organic molecules are formed, counting each dialdehyde molecule once even though it contains two carbonyl groups.
A separate identical sample undergoes complete catalytic hydrogenation without opening any carbon ring.
Which option correctly gives the original cyclohexene and hex-1-ene amounts, the total number of aldehyde groups formed during ozonolysis, and the identities of the two hydrogenation products?

42 / 50

42. An original mixture contains only two acyclic alkenes, each having molecular formula :
P: But-1-ene, .
Q: 2-Methylpropene, .
A sample undergoes complete reductive ozonolysis and gives propanal, propanone and methanal.
A separate identical sample undergoes complete strong oxidative cleavage using hot potassium permanganate followed by suitable acidic work-up. Assume every terminal methylene carbon is oxidised to carbon dioxide, every aldehyde-forming internal alkene carbon is oxidised to a carboxylic acid, and every ketone-forming carbon gives the ketone unchanged.
Which option correctly gives the original amounts of P and Q, the carbon dioxide evolved during strong oxidation and the mass of propanoic acid obtained?
Use , , .

43 / 50

43. Three reaction mixtures are prepared:
P: Benzene heated with fuming sulphuric acid (oleum).
Q: Benzene heated with concentrated nitric acid and concentrated sulphuric acid.
R: Benzene treated with bromine and anhydrous ferric bromide.
After successful monosubstitution, each aromatic product is examined for its likely directive influence during a subsequent controlled nitration. Assume sufficiently suitable conditions for further nitration and distinguish preferred substitution positions from claims of exclusive product formation.
Which statement correctly identifies the first-stage products, the incoming electrophiles and the relevant second-stage directing effects?

44 / 50

44. Two aromatic hydrocarbons undergo separate vigorous oxidations using excess hot alkaline potassium permanganate followed by acidification.
P: 1-Ethyl-4-methylbenzene, containing an ethyl group at carbon 1 and a methyl group at carbon 4.
Q: 1-tert-Butyl-4-methylbenzene, containing a tert-butyl group at carbon 1 and a methyl group at carbon 4.
Assume that every eligible alkyl side chain possessing at least one benzylic hydrogen is converted into a carboxyl group, while any substituent lacking benzylic hydrogen remains unchanged. Aromatic rings are not cleaved.
Which statement correctly predicts the aromatic organic products and the numbers of newly formed carboxyl groups?

45 / 50

45. A mixture of propene and 2-methylpropene is subjected to acid-catalysed hydration. Each alkene reacts quantitatively through its ordinary Markovnikov pathway without carbon-skeleton rearrangement.
The resulting alcohol mixture contains of primary, secondary or tertiary alcohol molecules in total, and its combined molar amount of carbon atoms is .
Which option correctly gives the amounts of the secondary and tertiary alcohols formed?

46 / 50

46. The following pairs of hydrocarbons are presented:

Pair First compound Second compound
P Pent-1-ene Pent-2-ene
Q Pent-2-ene 2-Methylbut-2-ene
R cis-Pent-2-ene trans-Pent-2-ene
S Staggered ethane Eclipsed ethane

A student asserts that every pair represents constitutional isomerism because each member has the same molecular formula as its partner.
Which statement correctly classifies the four pairs and evaluates the student's reasoning?

47 / 50

47. Three independent samples of pure n-hexane are subjected to different complete transformations:
Route P: Carbon-skeleton isomerisation to pure 2,3-dimethylbutane.
Route Q: Aromatisation to benzene, with hydrogen gas as the only additional product.
Route R: Cracking according to , where the four-carbon fragment is specifically but-1-ene.
Each resulting organic mixture is tested with bromine in an inert solvent under conditions allowing addition to ordinary C=C bonds but excluding aromatic substitution or addition.
Assume no competing reactions, ring cleavage or further substitution.
Which statement correctly compares the molecular products and the two reagent measurements?

48 / 50

48. Chloroethane, , is subjected to a second controlled photochemical chlorination. Exactly of chloroethane undergoes one additional chlorine substitution per molecule, and no other organic reactions occur.
For this experiment, the substitution tendency of each hydrogen on the carbon is four times that of each hydrogen on the carbon. Assume product amounts are proportional to hydrogen-site multiplicity multiplied by the corresponding per-hydrogen tendency.
The chloroethane was originally prepared quantitatively by monochlorination of ethane, and both chlorination stages are included when calculating total chlorine consumption.
Which option correctly gives the amounts of 1,1-dichloroethane and 1,2-dichloroethane formed during the second stage, together with the total chlorine consumed during both stages?

49 / 50

49. An unknown pure hydrocarbon X is acyclic and contains no heteroatoms.
A sample undergoes complete combustion, producing carbon dioxide and water.
A separate identical sample consumes hydrogen during complete catalytic hydrogenation, forming only 2-methylpropane.
A third sample is treated with cold, dilute alkaline potassium permanganate under conditions producing a vicinal diol without cleavage.
Which option correctly identifies X, the diol produced and the oxygen required to burn the original sample completely?

50 / 50

50. Iodination of methane is represented by the reversible reaction:

An oxidising agent such as iodic acid can remove the HI formed:

Assume that these are the only reactions and that all the produced HI is consumed by iodic acid. The process gives of iodomethane.
Which option correctly gives the net amounts of iodine molecules consumed, iodic acid consumed and water formed?

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top