Hydrocarbons Mock Test – NEET Chemistry
GKaim: Measure | Improve | Achieve

Hydrocarbons Mock Test – NEET Chemistry

Progressive Test — Guest First Round

0%

Hydrocarbons – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Three descriptions of molecular motion are supplied.
P: Rotation around the carbon–carbon single bond in ethane, represented successively by staggered, skew and eclipsed sawhorse projections.
Q: Rotation of an entire ethane molecule as one rigid object, without changing the relative positions of its atoms.
R: Attempted interconversion of cis-but-2-ene and trans-but-2-ene solely by unrestricted rotation around the carbon–carbon double bond while retaining its complete bonding arrangement.
Which statement correctly distinguishes the three cases?

2 / 50

2. Four pure hydrocarbons, each having molecular formula , are labelled P, Q, R and S:
P: cis-But-2-ene
Q: trans-But-2-ene
R: 2-Methylpropene
S: Cyclobutane
Each is subjected independently to complete catalytic hydrogenation under conditions that reduce carbon–carbon double bonds without opening saturated rings.
A separate portion of each is treated with ozone followed by reductive work-up, under ordinary alkene-ozonolysis conditions.
Which conclusion about distinguishing these four substances is valid?

3 / 50

3. Two separate alkenes undergo acid-catalysed hydration under conditions favouring the ordinary Markovnikov addition product.
P: But-1-ene
Q: But-2-ene
Assume that each reaction proceeds through the expected protonation and water-addition pathway without carbon-skeleton rearrangement.
Which statement correctly compares their principal constitutional alcohol products and the role of double-bond symmetry?

4 / 50

4. A ethyne sample is converted into three separate product fractions under carefully controlled conditions:
- Exactly of the ethyne molecules undergo complete cyclic trimerisation to benzene.
- Exactly undergo linear polymerisation to polyacetylene, whose ideal chains each contain 120 ethyne-derived repeating units.
- The remaining of ethyne is recovered unchanged.
Assume negligible polymer end-group contributions.
All three fractions are then hydrogenated separately under conditions that fully saturate carbon–carbon multiple bonds and benzene rings without cleaving polymer backbones.
Which option correctly gives the benzene produced, the amount of polyacetylene chains formed, the ethyne recovered unchanged before hydrogenation and the total hydrogen consumed during the final saturation?

5 / 50

5. The same constitutional organic product, 1,2-dibromocyclohexane, is prepared through two idealised routes.
Route P: Cyclohexene undergoes quantitative addition of bromine across its single carbon–carbon double bond.
Route Q: Cyclohexane undergoes exactly two successive photochemical bromine-for-hydrogen substitutions, selectively replacing one hydrogen at each of two adjacent ring carbons.
Assume no other substitutions, elimination, rearrangement or ring cleavage. Stereoisomeric products are not distinguished.
If each route produces of 1,2-dibromocyclohexane, which option correctly compares bromine consumption and HBr formation?

6 / 50

6. A chemist proposes the following identifications for two unknown carbonyl compounds obtained by hydration of alkynes with dilute sulphuric acid and mercuric sulphate:
P: But-1-yne gives butan-2-one.
Q: Ethyne gives ethanal.
The chemist further argues that the products can be predicted by first writing the applicable enol intermediates and then applying keto–enol tautomerisation.
Which statement correctly assesses both proposed products and the use of tautomerisation?

7 / 50

7. The following physical-property data are supplied for two geometrical isomers of but-2-ene.

Property cis-But-2-ene trans-But-2-ene
Normal melting point
Normal boiling point
Dipole moment Approximately

Both pure compounds are maintained separately at and . They are then completely hydrogenated over nickel under suitable conditions.
Which statement correctly combines their initial physical states, molecular polarity and final organic product?

8 / 50

8. Two alkyl bromides are heated separately with alcoholic KOH under otherwise identical conditions favouring -elimination.
P: 1-Bromo-2,2-dimethylpropane,
Q: 2-Bromo-2-methylbutane,
Assume that only dehydrohalogenation is being assessed and that no carbon-skeleton rearrangement occurs.
Which option correctly gives the number of constitutionally distinct alkenes obtainable directly from P and Q, respectively?

9 / 50

9. Propene reacts with HBr in the absence of organic peroxides. Two possible protonation pathways are considered:
Pathway P: Protonation produces a primary carbocation.
Pathway Q: Protonation produces a secondary carbocation.
Assume the ordinary carbocation-controlled electrophilic addition mechanism and that no rearrangement occurs.
Which statement correctly identifies the more favourable pathway and the principal organic product?

10 / 50

10. An unknown cyclic alkene X has a six-membered carbon ring and exactly one carbon–carbon double bond. It is subjected separately to:
Process P: Complete catalytic hydrogenation without ring cleavage.
Process Q: Reductive ozonolysis using .
Process R: Strong oxidation using hot, acidified , under conditions that oxidise both original double-bonded carbons to carboxylic acid groups.
The carbonyl product of Process Q is hexane-1,6-dial.
Which option correctly identifies X and the respective principal organic products of P and R?

11 / 50

11. The following approximate values are supplied for an acid–base comparison in a common idealised medium:

Acid Approximate
Ethyne, 25.0
Water, 15.7
Ammonia, 38.0
Ethene, 44.0

For proton-transfer equilibria, use:

Consider two reactions:
P: .
Q: .
Which statement correctly estimates their equilibrium constants and relates the difference to terminal-alkyne acidity?

12 / 50

12. A hydrocarbon consists of a closed ring of five carbon atoms, each bonded to two neighbouring carbon atoms by single bonds. All remaining valencies are satisfied by hydrogen atoms. Which classification correctly describes this compound?

13 / 50

13. An equimolar gaseous mixture of ethane and propane is subjected to controlled monochlorination under ultraviolet irradiation. Assume that both hydrocarbons experience identical collision conditions and that the relative rate of substitution per primary hydrogen is the same in both molecules.
The supplied relative substitution rates per hydrogen are:
Primary : Secondary .
Only monochlorinated products are considered, and their amounts are proportional to the number of available hydrogen atoms multiplied by their respective per-hydrogen substitution rates.
What fraction of the total monochlorinated organic products is 2-chloropropane, and what fraction originates from propane altogether?

14 / 50

14. Three monosubstituted benzene compounds are independently subjected to controlled electrophilic nitration:
P: Methylbenzene.
Q: Nitrobenzene.
R: Chlorobenzene.
Consider the following statements.
Statement I: The methyl group of P activates the aromatic ring and generally favours substitution at ortho and para positions.
Statement II: The nitro group of Q withdraws electron density and generally favours further electrophilic substitution at meta positions.
Statement III: Chlorine in R deactivates the aromatic ring overall but remains an ortho- and para-directing substituent.
Statement IV: Because R is deactivated, its incoming nitro group must be directed exclusively to meta positions.
Which statements are correct?

15 / 50

15. Two independently prepared, identical mixtures each contain ethyne and propyne. Mixture P is treated with sufficient sodium metal to replace every hydrogen directly attached to a triply bonded carbon, producing the corresponding sodium acetylides and hydrogen gas. Mixture Q undergoes complete cyclic trimerisation of ethyne only, while propyne is recovered unchanged. The benzene formed in Q is subsequently subjected to complete electrophilic mononitration.
Assume the two stipulated reaction pathways occur quantitatively and independently.
Which option correctly gives the hydrogen evolved from P, the total sodium consumed in P, and the nitrobenzene obtained from Q?

16 / 50

16. Three alkynes are tested independently for their ability to form metal acetylides:
P: Ethyne, .
Q: Prop-1-yne, .
R: But-2-yne, .
A suitable ammoniacal silver-ion reagent is used under conditions where each terminal acetylenic hydrogen is quantitatively replaced by silver, while non-acetylenic hydrogens remain unaffected.
Assume that the reaction proceeds only by the specified terminal-alkyne acid–base transformation and that the resulting silver acetylides are represented by their ideal formula units.
Which statement correctly identifies the organic-derived silver compounds and the amount of silver incorporated per mole of starting hydrocarbon?

17 / 50

17. Ethyne is converted into a saturated brominated hydrocarbon by two independent sequences:
Route P: Addition of exactly one equivalent of HBr, followed by addition of exactly one equivalent of .
Route Q: Addition of exactly one equivalent of , followed by addition of exactly one equivalent of HBr.
Assume ordinary addition across the available multiple bond at each stage, no substitution, no rearrangement and complete conversion.
Which statement correctly compares the first-stage intermediates and the final constitutional products?

18 / 50

18. Methane is subjected to two independently controlled reactions described in NCERT.
Route P: methane reacts with steam at in the presence of a nickel catalyst, forming carbon monoxide and hydrogen.
Route Q: A separate methane sample undergoes selective oxidation to methanol using a regulated oxygen supply and a suitable copper catalyst under the appropriate temperature and pressure.
Assume complete conversion of the limiting reagent in P, quantitative conversion of methane into methanol in Q, and no competing reactions.
Which option correctly gives the hydrogen produced in P, the methane remaining in P, the oxygen consumed in Q, and the methanol formed in Q?

19 / 50

19. Two positional alkyne isomers undergo successive additions of hydrogen chloride:
P: But-1-yne, .
Q: But-2-yne, .
Stage I: Exactly one equivalent of HCl is added to each alkyne under ordinary electrophilic-addition conditions.
Stage II: Another equivalent of HCl is added to each isolated vinyl chloride, giving the principal geminal dichloride.
Assume ordinary Markovnikov orientation for P, complete conversion in both stages and no carbon-skeleton rearrangement.
A separate portion of each original alkyne is tested with sodamide for terminal-acetylide formation.
Which statement correctly compares all three observations?

20 / 50

20. An acyclic monoalkene X has the structure:

It is subjected to cold, dilute, alkaline potassium permanganate in one experiment and to hot, acidified potassium permanganate in another.
Assume the first experiment gives a vicinal glycol without carbon–carbon cleavage, while the second completely cleaves the double bond, oxidising the aldehyde-forming fragment to its carboxylic acid and retaining the ketone-forming fragment.
Which option correctly gives the cold-oxidation product and the two carbon-containing products of strong oxidation?

21 / 50

21. A sample of pure 2-bromobutane is treated with alcoholic KOH under elimination conditions.
Assume that every molecule undergoes exactly one dehydrohalogenation and that the organic products contain only but-1-ene and the geometrical isomers of but-2-ene.
The complete alkene mixture is then subjected to reductive ozonolysis using .
Exactly of ethanal is isolated.
Which option correctly gives the total amounts of but-2-ene and but-1-ene originally produced by elimination and the amounts of methanal and propanal formed during ozonolysis?

22 / 50

22. An acyclic hydrocarbon has the condensed structural formula . A six-carbon continuous chain can be traced through the molecule, but that chain does not include both carbon–carbon double bonds. Which is the preferred IUPAC name?

23 / 50

23. A sample of 1-bromobutane is heated with alcoholic KOH under conditions favouring elimination. The principal alkene is isolated and divided into two portions.
Portion P undergoes HBr addition in the absence of peroxide.
Portion Q undergoes HBr addition in the presence of benzoyl peroxide under suitable radical-addition conditions.
The principal bromoalkane from each portion is separately subjected to idealised Wurtz self-coupling using sodium in dry ether. Assume no rearrangement or competing reactions during the stipulated coupling.
Which option correctly identifies the final saturated hydrocarbons from P and Q, respectively?

24 / 50

24. Two polymers are prepared from different two-carbon hydrocarbons:
P: Ethyne undergoes linear polymerisation under suitable conditions to produce polyacetylene.
Q: Ethene undergoes ordinary addition polymerisation to produce polyethene.
The polymers are subjected to the following comparisons:
I. Examination of their carbon–carbon backbone bonding.
II. Electrical-conductivity measurement before and after an appropriate treatment known to enhance the conductivity of polyacetylene.
III. Reaction with bromine under controlled conditions that permit addition across accessible ordinary carbon–carbon double bonds but exclude substitution and chain cleavage.
Which statement correctly combines the structural and chemical predictions?

25 / 50

25. An unknown pure acyclic alkyne X has molecular formula and contains one carbon–carbon triple bond.
The following observations are reported under independent, complete reactions:
I. Treatment with sodamide produces no terminal sodium alkynide.
II. Selective Lindlar reduction gives one cis alkene as the sole constitutional product.
III. Complete reductive ozonolysis of that alkene produces only propanal, , with two propanal molecules formed per molecule of alkene.
IV. Complete catalytic hydrogenation of X gives n-hexane.
Which statement correctly identifies X and predicts the corresponding alkene obtained instead by sodium–liquid-ammonia reduction?

26 / 50

26. The following standard molar enthalpies of combustion are supplied:


Ethyne undergoes complete cyclic trimerisation under suitable conditions, and the benzene product is considered in its liquid standard state for the thermochemical calculation:

A sample of ethyne is converted quantitatively into benzene.
Assume that all combustion enthalpies refer to the same standard-state carbon dioxide and water products.
Which option correctly gives the molar enthalpy of the trimerisation as written and the enthalpy change for the given sample?

27 / 50

27. A student compares the photochemical halogenation of alkanes using fluorine, chlorine, bromine and iodine. Consider the following statements.
Statement I: Fluorination is generally extremely vigorous and may be difficult to control.
Statement II: Bromination is generally slower than chlorination and is usually more selective towards the formation of the more stable carbon-centred radical.
Statement III: Iodination proceeds as readily as chlorination because the iodine–iodine bond is relatively weak.
Statement IV: Under comparable radical-substitution conditions, tertiary hydrogen atoms are generally more reactive towards halogen abstraction than secondary or primary hydrogen atoms.
Which statements are correct?

28 / 50

28. But-2-yne is subjected to two different controlled reductions.
Route P: Partial catalytic hydrogenation using and Lindlar catalyst.
Route Q: Reduction using sodium in liquid ammonia.
The major alkene products from P and Q are then separately subjected to complete catalytic hydrogenation using . Which statement correctly compares the alkene products and their final hydrogenation products?

29 / 50

29. An unknown acyclic monoalkene X has the molecular formula .
Reductive ozonolysis of X using followed by produces propanone and ethanal as its only organic cleavage products.
Separate samples of X are then treated with HBr under:
Route P: Ordinary peroxide-free conditions.
Route Q: Suitable benzoyl-peroxide conditions favouring free-radical addition.
Assume the expected major regioisomer is obtained in each route without carbon-skeleton rearrangement.
Which option correctly identifies X and the principal bromoalkane products of Routes P and Q, respectively?

30 / 50

30. Benzene is nitrated using a mixture of concentrated nitric acid and concentrated sulphuric acid.
A student proposes three changes to the ordinary mechanism:
P: Treat nitrate ion, , rather than nitronium ion, , as the principal attacking electrophile.
Q: Add substantial water to the nitrating mixture and assume that this necessarily increases the concentration of nitronium ion because water is a polar solvent.
R: Allow the initially formed arenium ion to lose a proton from the carbon at which the nitro group attached, thereby restoring the aromatic ring.
Which evaluation is chemically justified?

31 / 50

31. Three unbranched alkynes have molecular formula :
P: Hex-1-yne.
Q: Hex-2-yne.
R: Hex-3-yne.
Each undergoes three separate tests:
I. Reaction with sufficient sodamide to remove any terminal acetylenic hydrogen.
II. Hydration using dilute sulphuric acid and mercuric sulphate, followed by complete keto–enol tautomerisation.
III. Selective hydrogenation using Lindlar's catalyst.
Assume that the ordinary hydration of an unsymmetrical internal alkyne may give carbonyl products corresponding to either orientation of water addition.
An unknown sample gives no ammonia in Test I, gives only hexan-3-one as its constitutional carbonyl product in Test II, and produces a cis alkene capable of geometrical isomerism in Test III.
Which conclusion correctly identifies the sample and its selective-hydrogenation product?

32 / 50

32. The seven acyclic monoalkyne constitutional isomers listed for molecular formula are:

Code Alkyne
P Hex-1-yne
Q Hex-2-yne
R Hex-3-yne
S 3-Methylpent-1-yne
T 4-Methylpent-1-yne
U 4-Methylpent-2-yne
V 3,3-Dimethylbut-1-yne

All seven compounds are subjected independently to excess sodamide under suitable conditions and to complete catalytic hydrogenation without carbon-skeleton rearrangement.
Which statement correctly gives the number of alkynes capable of forming sodium alkynides and the number of constitutionally distinct saturated alkanes obtainable from hydrogenation of the entire set?

33 / 50

33. Consider the addition of hydrogen bromide to ethene and propene under ordinary peroxide-free conditions and under appropriate peroxide-initiated radical-chain conditions.
The following statements are proposed:
Statement I: Changing from ordinary HBr addition to peroxide-assisted HBr addition can change the principal constitutional product obtained from propene.
Statement II: Ethene can give the same constitutional bromoalkane through both pathways even though the mechanisms differ.
Statement III: The addition of a peroxide necessarily produces an analogous efficient anti-Markovnikov radical-chain addition with HCl and HI.
Statement IV: In the peroxide-assisted HBr propagation sequence, a bromine radical adds to the alkene before the resulting carbon radical abstracts hydrogen from HBr.
Which statements are correct?

34 / 50

34. Two reaction sequences begin with separate pure benzene samples.
Route P: Benzene is first nitrated with concentrated . The isolated nitrobenzene is subsequently brominated using under conditions sufficient for monosubstitution.
Route Q: Benzene is first brominated with . The isolated bromobenzene is subsequently nitrated using the same nitrating mixture under conditions sufficient for monosubstitution.
Assume the ordinary directing influences of the group already present, and discuss the principally favoured positions rather than claiming exclusive formation of one isomer.
Which statement correctly compares the final positional products?

35 / 50

35. An internal alkyne, but-2-yne, is treated with bromine in carbon tetrachloride in two successive stages.
Stage P: Exactly one equivalent of bromine adds across the triple bond, giving 2,3-dibromobut-2-ene.
Stage Q: Another equivalent of bromine adds across the remaining double bond, giving 2,2,3,3-tetrabromobutane.
For this question, describe the local geometries using the usual idealised carbon hybridisation model and count stereoisomers only where distinguishable configurations are possible.
Which statement correctly compares the carbon hybridisation and stereochemical possibilities at the central bond?

36 / 50

36. An acyclic monoalkene X undergoes ozonolysis followed by reductive work-up using zinc and water. The only organic products obtained are propanone and propanal, in equimolar amounts.
Assume that X contains only one carbon–carbon double bond and that no carbon atoms are lost during the specified work-up.
Which compound is X?

37 / 50

37. A polymer sample is reported to have the following ideal constitutional repeating unit:

It was prepared exclusively through ordinary addition polymerisation of one acyclic monoalkene without rearrangement, elimination of small molecules or alteration of the monomer's carbon skeleton.
The original monomer was also subjected separately to complete reductive ozonolysis.
Which statement correctly identifies the possible monomer configurations, the ozonolysis products and the structural information that cannot be recovered from the displayed repeating unit alone?

38 / 50

38. Consider the following statements concerning the peroxide effect during addition of hydrogen halides to alkenes.
Statement I: HBr can undergo a free-radical addition pathway in the presence of suitable organic peroxide.
Statement II: The peroxide effect is not ordinarily observed for HCl because abstraction of hydrogen from the relatively strong H–Cl bond does not favour the corresponding radical propagation step.
Statement III: The peroxide effect is not ordinarily observed for HI because iodine radicals readily combine to form iodine rather than sustaining the required alkene-addition chain.
Statement IV: The absence of the peroxide effect for HCl and HI implies that these hydrogen halides cannot add to alkenes under any conditions.
Which statements are correct?

39 / 50

39. Three alkylbenzenes are compared under conditions favouring selective photochemical substitution at a benzylic carbon bearing hydrogen:
P: Ethylbenzene, .
Q: Isopropylbenzene, .
R: tert-Butylbenzene, .
Assume that chlorine-radical abstraction at an available benzylic C–H bond is followed by formation of the corresponding benzylic chloride, while ordinary ring substitution and non-benzylic substitution are excluded from this particular test.
Which statement correctly identifies the eligible substrates and the degrees of the benzylic carbon radicals formed?

40 / 50

40. A vicinal dihalide, 1,2-dibromoethane, is converted into ethyne through two successive dehydrohalogenation steps. The first step removes one molecule of HBr, while the second removes another molecule of HBr from the resulting unsaturated halide. Which option correctly identifies the intermediate and the appropriate reagent sequence?

41 / 50

41. An alkene has the structure:

The compound undergoes two independent HBr additions.
P: Ordinary addition without peroxide.
Q: Addition under appropriate peroxide-initiated radical-chain conditions.
Assume that each reaction follows its principal orientation, no rearrangement occurs, and the reaction conditions do not select one enantiomer preferentially.
Which statement correctly compares the constitutional products and the number of possible stereogenic centres in each?

42 / 50

42. A pure sample of n-hexane undergoes controlled free-radical monochlorination. Assume that substitution at every constitutionally distinct carbon position is possible, no further chlorination occurs, and an achiral reaction environment does not favour one enantiomer over another.
Count the constitutional monochloro products and then count all individually distinguishable stereoisomers of those products, including achiral products.
Which statement correctly gives the two counts and identifies the optically active product types?

43 / 50

43. In an idealised experiment, of ethyne is divided between two complete-conversion pathways.
Route P: Exactly one-third of the original ethyne molecules undergo cyclic trimerisation in a red-hot iron tube at approximately , producing benzene.
Route Q: All remaining ethyne molecules undergo linear polymerisation to polyacetylene chains, each having an average of 100 ethyne-derived repeating-unit equivalents.
Assume quantitative conversion, no side reactions and negligible end-group contributions.
Which option correctly gives the amount of benzene formed, the amount of polymer chains formed and the hydrogen required to saturate all residual carbon–carbon double bonds in the isolated polyacetylene?

44 / 50

44. Two constitutional alkynes with formula are examined:
P: 4-Methylpent-1-yne, .
Q: 4-Methylpent-2-yne, .
Each is subjected to mercuric-ion-assisted acidic hydration, followed by complete keto–enol tautomerisation.
Assume that P gives the ordinary Markovnikov methyl ketone, while Q may hydrate in either orientation to give both constitutionally possible ketones.
Each starting alkyne is also separately tested with sufficient sodamide for terminal-acetylide formation.
Which statement correctly identifies the shared hydration product and the independent observations that distinguish P from Q?

45 / 50

45. A fixed methane sample is burnt using exactly oxygen.
For this problem, every methane molecule is converted completely through one of two pathways:
P: Complete combustion to carbon dioxide and water.
Q: Incomplete combustion to solid carbon black and water, as represented by the NCERT reaction .
Assume that all supplied oxygen is consumed and that no carbon monoxide, unreacted methane or other carbon product forms.
Which option correctly gives the amounts of methane following P and Q, carbon black formed, and water produced?

46 / 50

46. A pure sample of methane undergoes controlled photochemical chlorination. Exactly of methane molecules are converted into chlorinated organic products, distributed as follows:

Organic product Amount
Chloromethane,
Dichloromethane,
Trichloromethane,
Tetrachloromethane,

Assume that every chlorine atom introduced into an organic product replaces a methane-derived hydrogen, that each replacement consumes one chlorine molecule and forms one HCl molecule, and that no other reaction consumes chlorine.
Which option correctly gives the total chlorine consumed and hydrogen chloride formed?

47 / 50

47. Two pure hydrocarbons have the same molecular formula, :
P: Benzene, containing a planar aromatic six-membered ring.
Q: Hexa-1,5-diyne, , containing an open six-carbon chain with two terminal triple bonds.
Each undergoes three independently controlled experiments:
I. Complete catalytic hydrogenation of all carbon–carbon multiple bonds without carbon-skeleton cleavage.
II. Treatment with sufficient sodamide to remove all terminal acetylenic hydrogens.
III. Complete bromine addition in an inert solvent under conditions that permit ordinary addition to alkyne triple bonds but neither electrophilic substitution nor addition to benzene's aromatic system.
Assume quantitative conversion wherever a stipulated reaction is applicable.
Which statement correctly compares the outcomes?

48 / 50

48. A laboratory prepares benzene through three independent NCERT-type transformations.
Route P: ethyne undergoes complete cyclic trimerisation by passage through a red-hot iron tube under suitable conditions.
Route Q: sodium benzoate is heated with soda lime containing available sodium hydroxide. Assume one mole of sodium hydroxide is consumed per mole of sodium benzoate decarboxylated and that no other reaction occurs.
Route R: phenol vapour is passed over heated zinc dust. Assume one mole of zinc is required to convert one mole of phenol to benzene, producing ZnO.
The benzene recovered from all three routes is combined and subjected to quantitative mononitration.
Which option correctly gives the total benzene obtained, the zinc oxide formed in Route R and the nitrobenzene produced?

49 / 50

49. Calcium carbide is used as the starting material in a multistage hydrocarbon synthesis:
Stage I: is treated with water. The evolved ethyne is collected completely.
Stage II: Exactly of the collected ethyne reacts with one equivalent of HBr per molecule, producing bromoethene. Any remaining ethyne is recovered separately.
Stage III: All the bromoethene is selectively hydrogenated to bromoethane without cleavage of its C–Br bond.
Stage IV: The entire bromoethane sample undergoes ideal Wurtz self-coupling with sufficient sodium in dry ether.
Assume quantitative reactions, no rearrangements and no competing reactions.
Which option correctly gives the ethyne remaining after Stage II, the hydrogen consumed in Stage III, the alkane formed in Stage IV and its amount?

50 / 50

50. A sample of monodeuterated ethane, , undergoes controlled radical monochlorination.
For the stated conditions, the experimentally supplied relative substitution rates per individual atom are:

Assume that all five ordinary hydrogen atoms have the same per-atom substitution rate, the one deuterium atom follows the specified lower rate, only one substitution occurs per molecule, and no isotope exchange takes place.
Among all monochlorinated organic products, determine the fraction retaining deuterium and the fraction in which chlorine and retained deuterium are attached to the same carbon atom.

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top