Organic Compounds Containing Halogens Mock Test – NEET Chemistry
GKaim: Measure | Improve | Achieve

Organic Compounds Containing Halogens Mock Test – NEET Chemistry

Progressive Test — Guest First Round

0%

Organic Compounds Containing Halogens – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. 1,3-Dimethylbenzene undergoes controlled monobromination on its aromatic ring using .
Assume that substitution occurs only on the aromatic ring, that constitutional isomers are counted without regard to their relative amounts, and that the usual alkyl-group directing effects apply.

A benzene ring has methyl groups at carbons 1 and 3. The ring carbons available for bromination are positions 2, 4, 5 and 6. Positions 4 and 6 are related by symmetry. Position 2 lies between the two methyl groups. Position 5 is meta to both methyl groups.

Which statement correctly identifies the possible constitutional monobromination products and the position generally favoured by the combined directing and steric effects?

2 / 50

2. Two isotope-tracing sequences begin with ethanol.
Sequence P:
I. The starting ethanol contains labelled oxygen, .
II. Its hydroxyl group is replaced by bromine using phosphorus tribromide.
III. The isolated bromoethane is hydrolysed using hydroxide containing ordinary oxygen, .
Sequence Q:
I. Ordinary ethanol, , is converted into bromoethane by phosphorus tribromide.
II. The isolated bromoethane is hydrolysed using .
Assume complete intended substitutions without oxygen-isotope exchange or competing reactions.
Which statement correctly identifies the oxygen isotope in the final ethanol products?

3 / 50

3. A sample of 1-bromobutane is divided into three equal portions and treated separately under substitution-favouring conditions:
Portion P: Aqueous sodium hydroxide
Portion Q: Sodium methoxide in methanol
Portion R: Excess ethanolic ammonia
Which combination correctly identifies the principal organic products and the change in carbon count?

4 / 50

4. An agricultural research programme compares three observations after repeated historical use of DDT.
Observation P: Insects from a previously exposed population survive a specified DDT dose more frequently than insects from a population without that exposure history.
Observation Q: Chemical analysis confirms that substantial DDT remains in the local environment.
Observation R: Fish from the contaminated region show adverse effects associated with DDT exposure.
Which interpretation best reconciles the three observations?

5 / 50

5. Two positional isomers of trichlorobenzene are compared:
P: 1,3,5-Trichlorobenzene.
Q: 1,2,3-Trichlorobenzene.
Assume planar benzene rings and use a simplified bond-dipole model in which each aromatic carbon–chlorine bond contributes an equal vector directed radially towards chlorine.
Each isomer is also subjected to controlled electrophilic mononitration.
Only constitutionally distinct mononitro products are counted, irrespective of their relative yields.
Which statement correctly combines the molecular-dipole and product-count comparisons?

6 / 50

6. Benzene is treated with iodine under two sets of conditions:
Experiment P: Iodine alone under ordinary conditions.
Experiment Q: Iodine in the presence of a suitable oxidising agent such as nitric acid.
A chemist notes that electrophilic iodination is reversible and that hydrogen iodide is associated with the substitution process.
Which explanation best accounts for the usefulness of the oxidising agent in Q?

7 / 50

7. An idealised mixed sodium-coupling reaction is performed using bromobenzene and 1-bromopropane in dry ether.
Assume that every possible carbon–carbon coupling between the phenyl and n-propyl fragments is permitted, that no rearrangement occurs, and that no other products form.
Which set correctly identifies all constitutionally distinct hydrocarbon coupling products?

8 / 50

8. An optically pure sample of -2-bromobutane is treated with sodium iodide in dry acetone under conditions ensuring that the substitution occurs exclusively through an pathway, without elimination or racemisation.
Which product configuration is expected?

9 / 50

9. A primary alkyl bromide X gives a compound P containing five carbon atoms when treated with alcoholic KCN. Another portion of X gives a compound Q containing four carbon atoms when treated with potassium nitrite under suitable substitution conditions.
If the carbon skeleton of X is unbranched, which combination correctly identifies X, P and Q?

10 / 50

10. Equal-concentration samples of pure -2-bromobutane and pure -2-bromobutane are separately treated with the same achiral hydroxide reagent in the same achiral solvent at the same temperature.
Each reaction is experimentally verified to follow an exclusive pathway, with no elimination or racemisation.
Which statement correctly compares the two experiments?

11 / 50

11. Four conversions are proposed for preparing aromatic halides.

Conversion Starting compound Reagent sequence Claimed product
P Benzene Bromobenzene
Q Benzenediazonium chloride Iodobenzene
R Benzenediazonium chloride Fluorobenzene by Swarts exchange
S Benzenediazonium chloride Bromobenzene

Which set contains all the correctly proposed conversions?

12 / 50

12. Two constitutional isomers of undergo dehydrohalogenation with hot alcoholic KOH:
P:
Q:
Ignore geometrical isomerism and consider all constitutionally possible beta-elimination products.
Which statement is correct?

13 / 50

13. Three halogenated methane derivatives are examined:
P:
Q:
R:
A student makes the following statements:
I. P and Q both contain one hydrogen atom and three halogen atoms, but they are not the same compound.
II. Q is associated with a yellow solid and a characteristic odour.
III. The historical antiseptic association of Q is related to the liberation of iodine rather than an assumption that the intact molecule is identical to elemental iodine.
IV. R is trichloromethane and was historically used as a general anaesthetic.
Which combination is correct?

14 / 50

14. But-2-ene undergoes bromine addition to form a vicinal dibromide.
The dibromide is then subjected to controlled removal of one molecule of HBr to isolate 2-bromobut-2-ene as the specified principal intermediate.
This intermediate is subsequently treated with excess sodium amide in liquid ammonia under conditions suitable for removing the remaining HBr.
Assume complete intended conversion without rearrangement.
Which statement correctly identifies the final product and explains why the second elimination requires a stronger base than ordinary dehydrohalogenation of a saturated alkyl bromide?

15 / 50

15. Chlorobenzene is treated separately with the following reagents:
Reaction I: under electrophilic aromatic bromination conditions.
Reaction II: Sodium metal in dry ether, using chlorobenzene as the sole organic halide.
Reaction III: Magnesium in dry ether, followed by hydrolysis.
Which combination correctly identifies the principal organic products?

16 / 50

16. The solvolysis of a tertiary alkyl bromide is represented by the simplified reversible ionisation:

The carbocation is then trapped by water to form an alcohol.
A second experiment is performed in which the concentration of dissolved bromide ion is increased substantially by adding a soluble bromide salt.
Assume that the salt does not significantly change solvent polarity, activity coefficients or the intrinsic forward ionisation rate constant.
Which statement correctly predicts a possible effect of the added bromide?

17 / 50

17. A nucleophile attacks the aromatic carbon bearing chlorine in 4-nitrochlorobenzene, producing a negatively charged addition intermediate before chloride is eliminated. A student proposes that 3-nitrochlorobenzene should stabilise the corresponding intermediate equally well because both compounds contain one nitro group.
Which explanation most directly identifies the error?

18 / 50

18. Methylbenzene undergoes controlled photochemical chlorination, with two successive benzylic hydrogen atoms replaced by chlorine and ring chlorination neglected. Which product and classification are correct?

19 / 50

19. Chlorobenzene is subjected separately to the following electrophilic substitution conditions:
Reaction P: Heating with fuming sulphuric acid under controlled monosulphonation conditions.
Reaction Q: Treatment with bromine in the presence of anhydrous under controlled monobromination conditions.
Which statement correctly identifies the principal substitution patterns and the fate of the original carbon–chlorine bond?

20 / 50

20. Two environmental control measures are implemented:
Measure P: New emissions of a persistent chlorofluorocarbon are sharply reduced.
Measure Q: New applications of a persistent, fat-soluble pesticide such as DDT are discontinued.
Which prediction most appropriately accounts for the effects of chemical persistence?

21 / 50

21. An enantiomerically pure sample of -2-bromobutane contains predominantly the bromine isotope at its stereogenic carbon.
The sample is treated with isotopically enriched under conditions experimentally verified to permit a single halide-exchange event at that carbon. The labelled product is isolated before a second exchange can occur.
Which statement correctly predicts the result?

22 / 50

22. A chemist proposes preparing 1-iodobutane through the following routes:
Route P: 1-Bromobutane treated with sodium iodide in dry acetone.
Route Q: But-1-ene treated with HI under ordinary electrophilic addition conditions.
Route R: Butan-1-ol treated with iodine and red phosphorus under suitable conditions.
Which assessment correctly identifies the routes expected to give the required terminal iodide?

23 / 50

23. An initially pure meso sample of 2,3-dibromobutane is subjected to two controlled nucleophilic-substitution experiments.
P: Exactly one bromine atom is replaced by hydroxyl through an exclusive backside event.
Q: Both bromine atoms are replaced by hydroxyl, each through an exclusive backside event at its own stereogenic carbon.
Assume achiral reaction conditions, equal accessibility of symmetry-related sites, no elimination and no subsequent configurational change.
Which statement correctly compares the stereochemical possibilities?

24 / 50

24. An environmental study investigates four hypothetical organic compounds having different tendencies to persist and accumulate in fatty tissues.

Compound Environmental degradation Preference for fatty tissue
P Rapid Low
Q Rapid High
R Slow Low
S Slow High

Assume comparable environmental releases and exposure opportunities, and that the listed tendencies are the principal factors governing their behaviour.
Which inference best explains why DDT-like compounds can become serious food-chain contaminants?

25 / 50

25. An optically inactive sample of 1-bromopropane is treated separately with two nitrite reagents under conditions giving their characteristic linkage-selective substitution products.
P: Potassium nitrite, .
Q: Silver nitrite, .
Assume complete intended substitution, no elimination and no competing reaction.
Consider the following statements.
Statement I: The two principal organic products can have the same molecular formula while differing in the atom through which the nitrogen–oxygen-containing group is attached to carbon.
Statement II: P predominantly gives propyl nitrite, , whereas Q predominantly gives 1-nitropropane, .
Statement III: The products must be identical because both reagents contain one nitrogen and two oxygen atoms per nitrite unit.
Statement IV: The difference illustrates why the bonding character and reagent identity of an ambident nucleophile must be considered when predicting substitution products.
Which combination is correct?

26 / 50

26. Cyclohexene undergoes two independent bromination reactions.
P: Addition of one molecule of bromine in a suitable inert solvent under conditions producing anti addition across the double bond.
Q: Addition of HBr under ordinary ionic conditions, giving the expected saturated monobromide.
Assume achiral starting materials and reagents, and no competing reactions.
Which statement correctly compares the stereochemical nature of the products?

27 / 50

27. Two compounds having the molecular formula are prepared independently:
Reaction I: Ethyne is treated with two molar equivalents of HBr under ordinary addition conditions, without peroxides.
Reaction II: Ethene is treated with one molar equivalent of in .
Which pair correctly identifies the principal products?

28 / 50

28. A sample of 1-chloropropane is converted completely into 1-iodopropane by treatment with sodium iodide in dry acetone. The initial chloride and final iodide are separately shaken with water under conditions in which each forms an organic layer.
Given:



Which statement correctly combines the chemical and physical consequences of the conversion?

29 / 50

29. Tert-butyl chloride and tert-butyl bromide undergo hydrolysis through verified first-order pathways in the same solvent at constant temperature.
Their rate constants satisfy:

The initial concentrations are:


Which statement correctly compares their initial rates and half-lives?

30 / 50

30. 5-Bromopent-1-ene, , undergoes the following sequence:
Step I: Treatment with alcoholic KCN under conditions giving exclusive substitution at the terminal carbon bearing bromine.
The isolated nitrile is then divided into two portions.
Portion P: Complete reduction of the nitrile group using under conditions preserving the carbon–carbon double bond.
Portion Q: Selective catalytic hydrogenation of the carbon–carbon double bond under conditions preserving the nitrile functional group.
Which pair correctly identifies the final organic products?

31 / 50

31. Consider the following three compounds:
P:
Q:
R:
A chemist makes these statements.
I. P has a secondary bromine-bearing carbon but no stereogenic centre.
II. Q can exist as enantiomers because one carbon has four different substituents.
III. R is a geminal dibromide and cannot be chiral solely through its central carbon because two bromine substituents are identical.
IV. Complete hydrolysis of Q and R under suitable conditions necessarily gives the same stable organic product because both contain two bromine atoms.
Which combination is correct?

32 / 50

32. Ethylbenzene is divided into two portions.
Portion P is treated with a controlled amount of chlorine in the presence of anhydrous .
Portion Q is treated with chlorine under photochemical conditions favouring benzylic monochlorination.
Ignoring minor reactions, which comparison is correct?

33 / 50

33. Two structurally related compounds are investigated:
P: , benzyl chloride.
Q: , benzal chloride.
Each is hydrolysed completely under conditions favouring replacement of the available benzylic carbon–chlorine bonds.
The products are subsequently subjected to suitable mild oxidation conditions.
Assume no aromatic-ring substitution or carbon–carbon bond cleavage.
Which statement correctly identifies the products immediately after hydrolysis and the effect of the subsequent oxidation?

34 / 50

34. Two unsaturated organic halides are compared:
P: Vinyl fluoride, .
Q: 4-Nitrofluorobenzene, .
Each is treated separately with sodium methoxide under conditions suitable for aromatic nucleophilic substitution where activation is present.
Assume that addition across the carbon–carbon double bond of P is excluded and that no photochemical or radical reactions occur.
Which statement best explains their differing behaviour towards replacement of fluorine?

35 / 50

35. Two historically used refrigerants are compared:
P: Chlorodifluoromethane (R-22),
Q: Dichlorodifluoromethane (Freon-12),
Which statement correctly combines their molecular structures with the characteristic ozone-depletion mechanism of chlorine-containing refrigerants?

36 / 50

36. An idealised preparation of chlorodifluoromethane uses the balanced reaction:

Initially, of chloroform and of HF are available.
Assume that only the stated reaction occurs and that the limiting reagent is consumed completely.
What amounts of chlorodifluoromethane and unreacted chloroform are obtained?

37 / 50

37. Three substitution reactions are described by the following initial-rate observations:

Reaction Effect of doubling Effect of doubling
P Rate doubles Rate doubles
Q Rate doubles Rate unchanged
R Rate doubles Rate increases by a factor of 1.5

Assume the observations are reproducible at constant temperature and that R may involve more than one kinetically relevant pathway.
Which interpretation is most defensible?

38 / 50

38. A three-carbon primary alkyl bromide undergoes the following sequence:

Assuming complete conversion through the intended reactions, which statement correctly identifies P and Q?

39 / 50

39. Three fluorine-containing organic compounds are treated separately with sodium methoxide under conditions appropriate to their structures:
P: Fluoromethane, .
Q: 4-Nitrofluorobenzene, .
R: Fluorobenzene, .
Which statement correctly distinguishes the characteristic nucleophilic substitution behaviour of these compounds?

40 / 50

40. A sample of iodoform is examined using two independent measurements.
First, its composition is determined to be .
Second, a specimen is observed to be a yellow crystalline solid with a characteristic objectionable smell.
A student then makes these inferences:
I. The compound is triiodomethane.
II. Each molecule contains three iodine atoms covalently attached to one carbon atom.
III. Its historical antiseptic association establishes that unchanged iodoform molecules themselves possess the principal antiseptic action.
IV. The compound's historical replacement by other iodine-containing formulations is consistent with its objectionable smell and limitations of use.
Which combination is correct?

41 / 50

41. A chemist wishes to prepare ethyl tert-butyl ether, , using a Williamson ether synthesis. Two possible routes are proposed:
Route P: Sodium tert-butoxide reacts with bromoethane.
Route Q: Sodium ethoxide reacts with 2-bromo-2-methylpropane.
Both reactions are conducted under conditions suitable for the respective alkoxide reactions.
Which assessment is most appropriate?

42 / 50

42. Cyclohexyl chloride is subjected to two separate experiments.
P: Hydrolysis under conditions favouring substitution of chlorine by hydroxyl.
Q: Dehydrohalogenation with alcoholic KOH, followed by addition of bromine to the isolated unsaturated product in an inert solvent.
Assume complete intended transformations and no rearrangement.
Which statement correctly identifies the final organic products?

43 / 50

43. Two separate samples of haloalkanes are contacted with water at room temperature:
P: 1-Chloropropane, density .
Q: 1-Bromopropane, density .
The water density is .
The samples are then subjected separately to complete hydrolysis using suitable aqueous hydroxide conditions.
Assume that each pure haloalkane initially forms a distinct organic layer and that the alcohol product is completely miscible with water at the stated temperature.
Which statement correctly predicts the initial layer positions and the final organic product?

44 / 50

44. A tertiary alkyl bromide undergoes solvolysis under conditions permitting both substitution and elimination.
The following observations are recorded:
I. The overall substrate-disappearance rate is first order in alkyl bromide concentration.
II. A tertiary alcohol and an alkene are both isolated.
III. Increasing the temperature changes the relative amounts of alcohol and alkene.
IV. Changing the concentration of an externally added weak nucleophile produces no measurable change in the initial ionisation rate.
Which conclusion best explains the combined evidence?

45 / 50

45. The peroxide effect in hydrohalogenation is examined using a simplified free-radical chain model.
For addition of to an alkene, the two relevant propagation steps are modelled as:
Step I: Addition of to the double bond, replacing its pi bond by a carbon–halogen bond.
Step II: Hydrogen abstraction by the resulting carbon radical from , forming a carbon–hydrogen bond and regenerating .
Use the following approximate bond enthalpies:

Bond or bond contribution Enthalpy (kJ mol)
C=C pi-bond contribution 267
C–H 413
C–Cl 351
C–Br 293
C–I 234
H–Cl 431
H–Br 366
H–I 299

Assume this bond-enthalpy model is adequate for comparing the two propagation steps.
Which hydrogen halide has both propagation steps exothermic and is consistent with the familiar peroxide-effect exception?

46 / 50

46. A chemist wishes to convert 2-bromopropane into 1-bromopropane without changing the number of carbon atoms. The following route is proposed:

Which combination of X, P and Y is suitable?

47 / 50

47. 1-Bromo-2-fluoroethane, , undergoes two alternative carbon-chain extension sequences.
Route P: Substitution with alcoholic KCN, followed by complete acidic hydrolysis of the resulting nitrile.
Route Q: Selective magnesium insertion into the carbon–bromine bond using dry ether, followed by carbon dioxide and acidic hydrolysis.
Assume that the carbon–fluorine bond remains intact throughout both sequences and that no competing reactions occur.
Which statement correctly identifies the products?

48 / 50

48. Two routes are considered for preparing positional isomers of chloronitrobenzene:
Route I: Direct chlorination of nitrobenzene using .
Route II: Diazotisation of 4-nitroaniline followed by Sandmeyer chlorination.
Which major-product pair is expected?

49 / 50

49. Two samples of but-2-ene are separately treated with bromine in an inert solvent under conditions giving anti addition:
Sample P contains pure cis-but-2-ene.
Sample Q contains pure trans-but-2-ene.
A student isolates 2,3-dibromobutane from both experiments and claims that the stereochemical compositions must be identical because the constitutional formula is the same.
Which statement correctly evaluates the claim?

50 / 50

50. Freon-12, , was historically used as an aerosol propellant and as a refrigerant. In one simplified comparison, an aerosol releases its Freon-12 charge during use, whereas an initially sealed refrigeration system retains most of its charge but gradually develops a leak. Which conclusion is most appropriate?

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top