Current Electricity Mock Test – NEET Physics
GKaim: Measure | Improve | Achieve

Current Electricity Mock Test – NEET Physics

Progressive Test — Guest First Round

0%

Current Electricity – Progressive Test

Welcome to the Progressive Test.

Click Start Test to begin the loaded practice round.

Good luck!

1 / 50

1. Two rechargeable cells are connected in parallel with their positive terminals joined at U and their negative terminals joined at L.
Cell P has EMF and internal resistance .
Cell Q has EMF and internal resistance .
Initially, an external resistor is connected between U and L.
A switch then disconnects the external resistor completely, but the two cells remain connected to each other in parallel.
Their EMFs and internal resistances remain constant.
Which pair gives the ratio of final to initial chemical-energy storage rate in Q and the ratio of final to initial internal heating rate in P?

2 / 50

2. A uniform metallic wire has resistance at . Its temperature coefficient of resistance referred to is .
Assume that the resistance varies linearly with temperature from to , and that changes in wire dimensions are negligible.
An experimenter chooses as a new reference temperature and defines

Which pair gives and the resistance at ?

3 / 50

3. During an experiment to determine the resistance of a metallic conductor, a student uses an ideal ammeter and a voltmeter having a constant positive zero error. The conductor is ohmic and remains at a fixed temperature throughout the experiment.
The following measurements are recorded:

Current () Voltmeter reading ()
0.20 1.40
0.40 2.40
0.60 3.40

The voltmeter adds the same constant positive error to the actual potential difference at every reading.
Which pair gives the true resistance of the conductor and the actual potential difference across it when the current is ?

4 / 50

4. Consider the following Assertion (A) and Reason (R) for a steady DC resistor network.
Assertion (A): A resistor in a branch containing an open switch can carry zero current and dissipate zero electrical power, while an ideal voltmeter placed across that open switch indicates a nonzero potential difference.
Reason (R): Zero current produces zero potential drop across the resistor, but the remaining powered network can maintain different potentials at the two terminals of the open switch.
Assume that the resistor and switch are in series, the remaining network maintains a nonzero potential difference between the branch's external terminals, and the ideal voltmeter draws no current.

5 / 50

5. A balanced Wheatstone bridge is supplied by an ideal constant-voltage source.

The four resistive arms are arranged between upper junction A and lower junction D. The left path consists of between A and B and between B and D. The right path consists of between A and C and between C and D. A galvanometer joins B and C. Initially, it reads zero. Subsequently, both upper arms A–B and A–C are replaced by resistors having twice their original values. The lower arms and source voltage remain unchanged.

Which pair gives the ratio of final to initial source current and the final galvanometer current?

6 / 50

6. Three branches connect common junctions U and L.

The left branch contains a real cell of EMF , positive terminal towards U, with internal resistance . The right branch contains a real cell of EMF , also positive towards U, with internal resistance . The central branch contains a rechargeable cell of unknown positive EMF , positive terminal towards U, in series with a resistance. There is no external load. Initially, an ideal ammeter shows zero current in the central branch. Subsequently, only the resistance of the right branch is increased from to , while its EMF and all other branch parameters remain unchanged.

Which pair gives and the rate of chemical-energy storage in the central cell after the resistance change?

7 / 50

7. An ideal source supplies a resistor P in series with a resistor Q.
The circuit operates in this arrangement for .
A switch then connects a second resistor directly across Q. P remains in series with the resulting parallel combination.
The second arrangement operates for an unknown time . The value of is chosen so that Q dissipates exactly the same electrical energy during the second interval as during the first.
All resistance values remain constant, and switching takes negligible time.
Which pair gives and the ratio of charge supplied by the source during the second interval to that supplied during the first?

8 / 50

8. A real cell with constant EMF and internal resistance is tested using different positive external load resistors.

The horizontal axis represents the steady discharge current , in amperes. The vertical axis represents the electrical power , in watts, dissipated in the external load. The measured characteristic is a smooth downward-opening parabola passing through the origin and the points and . The usual constant-EMF, constant-internal-resistance model applies throughout the plotted range.

Which pair gives the cell EMF and the maximum possible electrical power delivered to an external positive resistance?

9 / 50

9. An electrical device operates under three successive steady voltage-current conditions. In two intervals, the applied voltage polarity or current direction is reversed.

The device has two terminals P and Q. Voltage is defined as , and signed current I is positive when conventional current enters the device through P. Thus, instantaneous electrical power absorbed by the device is . The voltage and current remain constant within each stated time interval.
Time interval Signed voltage V Signed current I
to
to
to

Which pair gives the net electrical energy absorbed by the device and the signed net charge entering terminal P over the complete interval?

10 / 50

10. Two adjacent closed loops share a resistor.

The left outer branch contains an ideal cell and a resistor. The right outer branch contains an ideal rechargeable cell and another resistor. Clockwise mesh currents and are assigned. The left cell produces a potential rise during clockwise traversal of the left mesh, whereas the right cell produces a potential drop during clockwise traversal of the right mesh. The left clockwise mesh traverses the shared resistor downwards, while the right clockwise mesh traverses it upwards. Both ideal cells are capable of reversible energy conversion.

Which pair gives the electrical heating rate in the shared resistor and the chemical-energy storage rate in the right-hand cell?

11 / 50

11. A three-junction conducting circuit contains ideal cells and ohmic resistors.

The junctions are A, B and C. An ideal cell connects B to A, with A as its positive terminal, so . A separate ideal cell connects B to C, with C as its positive terminal, so . Three resistors also connect the junctions: between A and B, between B and C, and between A and C. All five branches are connected simultaneously. The ideal cells have zero internal resistance.

Which pair gives the current through the cell and the total electrical power dissipated in the three resistors?

12 / 50

12. A conducting device is connected across a variable DC source. At each operating point, its static resistance is defined as , where and are positive.

The horizontal axis represents current in amperes, and the vertical axis represents static resistance in ohms. Over the experimental range to , the graph is a straight line through and . The relationship is valid continuously throughout this current range.

Which pair gives the device voltage at and the increment in voltage when the current increases from to ?

13 / 50

13. Two unequal positive resistors are tested in series and parallel across the same ideal voltage source. Only the total heating rates of the combinations are initially measured.

Resistors P and Q have unknown positive resistances, with . An ideal source is used in both experiments. When P and Q are connected in series, their combined heating rate is . When they are connected in parallel, their combined heating rate is . Their resistances remain unchanged between experiments.

Which pair gives the resistance of P and the ratio of its parallel-connection heating rate to its series-connection heating rate?

14 / 50

14. Three metallic wires meet at a junction J, and the free electrons in different wires have different drift directions.

Wire P has cross-sectional area , and electrons drift towards J with speed . Wire Q has area , and electrons drift away from J with twice the electron drift speed in P. Wire S has area . All three wires have free-electron number density . The steady currents satisfy Kirchhoff's junction rule. Take the magnitude of electron charge as .

Which pair gives the electron drift direction in S and the magnitude of conventional charge transported through S in ?

15 / 50

15. A conducting network is formed from four positive ohmic resistors connected around a closed quadrilateral.

The four junctions are A, B, C and D in cyclic order. A resistor connects A to B, a resistor connects B to C, a resistor connects C to D, and another resistor connects D to A. An ideal source is connected between A and C. Initially, no other connections exist. An ideal wire is then connected directly between B and D while the source remains connected between A and C.

Let and denote the initial and final source currents.
Which pair gives the final current through the resistor and the ratio ?

16 / 50

16. Two rechargeable cells P and Q, each having internal resistance , are connected in parallel with like terminals joined and supply an external resistor.
Cell P has fixed EMF . The EMF of Q is adjusted to different positive values without changing its internal resistance.
Match the settings in Column I with the direction and magnitude of current through Q in Column II.

Column I — EMF of Q Column II — Current through Q
P. 1. Zero current
Q. 2. , charging
R. 3. , discharging
S. 4. , discharging

Assume all cell parameters are constant in each operating condition.
Which matching is correct?

17 / 50

17. A uniform metallic wire has length , mass , electrical resistance and mass density . Its temperature is maintained constant.
The wire is then uniformly stretched to a length of , without losing any material. Assume that its resistivity and mass density remain unchanged.
The stretched wire is connected across an ideal source.
Which pair gives the resistivity of the wire material and the current through the stretched wire?

18 / 50

18. A real cell is tested using an energy measurement, and the useful fraction of its chemical-energy conversion is known.

A real cell has unknown positive EMF E and known internal resistance . It supplies one external ohmic resistor R for at steady current. During this interval, of electrical energy is dissipated in R. This useful external energy equals exactly two-thirds of the total chemical energy converted by the cell. No other electrical loads are connected.

Which pair gives the cell EMF and its total internal heating during the interval?

19 / 50

19. A uniform ohmic resistor is tested at constant temperature. The ammeter has a fixed but unknown positive zero error: its displayed current exceeds the true current by the same amount b in every observation.
The voltmeter is correctly calibrated and measures the true potential difference across the resistor.

True potential difference Displayed ammeter current

The displayed current is related to the true current by .
Which pair gives the actual resistor resistance and the ammeter zero error?

20 / 50

20. A metre bridge has a uniform resistance wire of length . An unknown positive resistance X is connected in the left gap and a known resistance in the right gap.

The left end of the bridge wire is A and the right end is D. The unknown resistance X connects A to the intermediate gap junction B, while the known resistance connects B to D. A galvanometer joins B to a jockey touching the wire. The balance length is measured from A. Initially, the galvanometer gives zero deflection when the jockey is at . Subsequently, the right-gap resistance is increased to , while X and the uniform bridge wire remain unchanged.

Which pair gives X and the new balance length measured from A?

21 / 50

21. A resistive heating element is rated . It is connected to an ideal source through two connecting leads whose combined resistance is .
Assume that the heating element remains ohmic with the resistance inferred from its rating. The leads and heating element are all connected in series.
Which pair gives the fraction of source power dissipated in the heating element and the electrical energy lost in the leads during ?

22 / 50

22. Two metallic wires of the same material and length have different cross-sectional areas. Their electron drift speeds are compared under two circuit connections.

Wire P has cross-sectional area A and resistance . Wire Q has cross-sectional area and resistance . Both wires have the same free-electron number density and remain at constant temperature. In experiment I, the wires are connected in series across an ideal source of voltage V. In experiment II, the same two wires are connected in parallel across the same ideal source. Electron drift speed means its magnitude.

Which pair gives the ratio of drift speed in P during experiment II to that during experiment I and the ratio of drift speeds in P and Q during experiment II?

23 / 50

23. An ideal voltage source is connected across two parallel branches containing fixed positive ohmic resistors.
Branch P initially contains a resistor in series with a resistor.
Branch Q initially contains a resistor in series with an resistor.
An experimenter then exchanges only the and resistors between the branches, without changing the remaining connections or source voltage.
Which pair gives the ratio of final to initial equivalent resistance and the ratio of final to initial electrical power dissipated in the resistor?

24 / 50

24. A conductor consists of two identical uniform metallic sections P and Q joined in series.
Initially, their lengths, cross-sectional areas, mobile-electron densities and electron mobilities are equal.
The complete conductor is connected across an ideal constant-voltage source V.
Section Q is subsequently heated while P remains at its original temperature. As a result, the electron mobility in Q becomes half its initial value, while its mobile-electron density and dimensions remain unchanged.
Assume the microscopic relation applies and the complete conductor remains ohmic at each maintained temperature.
Which pair gives the ratio of final to initial source current and the ratio of final to initial electric-field magnitude inside Q?

25 / 50

25. A metallic wire is stretched uniformly and subsequently tested under two different electrical constraints.

Initially, a uniform metallic wire has length L, cross-sectional area A and resistance R. Its resistivity and free-electron number density remain constant throughout. The wire is stretched uniformly to twice its original length while its volume remains constant. In experiment I, the stretched wire is connected across an ideal source maintaining the same potential difference V that was initially applied to the unstretched wire. In experiment II, the stretched wire is connected across a separately adjusted ideal source so that the magnitude of the electric field inside the stretched wire equals the original electric-field magnitude . Both experiments use the same final stretched-wire geometry.

Which pair gives the ratio of electrical heating rate in experiment II to that in experiment I and the ratio of electron drift-speed magnitudes in experiment II to experiment I?

26 / 50

26. Four resistance networks are described in Column I. Each contains only identical ohmic resistors of resistance . Match each arrangement with its equivalent resistance in Column II.

Column I — Arrangement Column II — Equivalent resistance
P. Two resistors connected in series 1.
Q. Three resistors connected in parallel 2.
R. One resistor in parallel with a series combination of two resistors 3.
S. Two resistors connected in parallel 4.

Select the correct matching.

27 / 50

27. Three positive ohmic resistors form the sides of a triangular network with vertices A, B and C.

The resistor connecting A directly to B has resistance . The resistor connecting B directly to C has resistance , and the resistor connecting C directly to A has resistance . There are no other conducting paths. In experiment P, an ideal source is connected between A and B. In experiment Q, the same source is instead connected between B and C. The source is disconnected from the previous terminal pair before each new connection.

Let the source currents be and .
Which pair gives and the ratio of electrical powers in the A–B resistor during experiments P and Q?

28 / 50

28. Two uniform metallic sections P and Q are joined end to end, forming an unbranched conductor.
Their lengths and cross-sectional areas satisfy

Their free-electron number densities and mobility magnitudes satisfy

A steady current flows through both sections. Assume each section obeys and , with uniform properties within each section.
Which pair gives the drift-speed ratio and the potential-difference ratio ?

29 / 50

29. An ideal voltage source supplies an ohmic resistor of resistance in series with a parallel combination of two resistors having resistances and . Here, and are positive.
The resistance is adjusted until the power dissipated in the series resistor equals the combined power dissipated in the two parallel resistors.
Which pair gives and the fraction of the total source power dissipated in resistor ?

30 / 50

30. A uniform metallic conductor has three cylindrical sections joined end to end. Each section has length , but their cross-sectional areas are , and , respectively. All sections have equal free-electron number density and electron mobility.
A steady current passes through the entire conductor. Let the corresponding mean electron drift-transit times across the sections be , and their electric-field magnitudes be .
Which pair correctly gives the fraction of the total electron drift-transit time spent in the third section and the field ratio ?

31 / 50

31. Two rechargeable cells P and Q are connected in parallel with like terminals joined and supply a positive ohmic resistor.
Cell P has EMF and internal resistance .
Cell Q has EMF and internal resistance .
The external resistor has resistance , and all circuit elements operate steadily.
Consider the following statements.
Statement I: Cell Q receives electrical power through its terminals at the rate of .
Statement II: Cell P converts chemical energy into electrical energy at the rate of , of which is dissipated in its internal resistance.
Statement III: The external resistor dissipates , while Q stores chemical energy at the rate of .
Statement IV: The currents supplied by P and Q must be equal because the cells are connected in parallel.
Which combination is correct?

32 / 50

32. An ideal constant-current source supplies to two resistors of and connected in parallel. Both resistors are ohmic and remain at constant temperature.
A third resistor of is subsequently connected in parallel with the existing two resistors. The source continues to supply exactly .
Which pair gives the final potential difference across the parallel network and the ratio of final to initial power in the original resistor?

33 / 50

33. A steady conducting network contains two junctions A and D connected by a branch whose current direction is initially unknown.

An external conductor brings into junction A. Two other branches carry each away from A towards separate parts of the network. The remaining branch directly connects A to D, and its unknown current x is assigned positive from A towards D. At junction D, another external conductor brings into D. Apart from the A–D connection, the only remaining branch at D carries an unknown current y, assigned positive away from D. All currents are steady.

Which pair gives the signed currents x and y?

34 / 50

34. A metre bridge is operated with a galvanometer whose resistance is not negligible.

An ideal source maintains the left terminal A at higher potential than the right terminal D. The left gap contains between A and the gap junction B, and the right gap contains between B and D. The uniform bridge wire has total resistance . A jockey J is fixed at the mark, so the wire resistances A–J and J–D are each . A galvanometer of resistance connects B to J. All connecting wires are ideal.

Which pair gives the actual galvanometer current and the total source current?

35 / 50

35. A uniform metallic wire is divided into two equal-length sections P and Q without cutting it. The sections have the same cross-sectional area and are made from the same material.
Section P is maintained at , while section Q is maintained at . When a steady current passes through the wire, the measured potential differences across P and Q are and , respectively.
Assume that the material's resistance varies linearly with temperature and that its dimensions remain unchanged.
Which pair gives the temperature coefficient of resistance referred to and the fraction of total electrical power dissipated in section Q?

36 / 50

36. An ideal variable-voltage source supplies a network containing a junction B.

The negative source terminal is connected to reference junction D, whose potential is zero. The positive terminal establishes . A resistor connects A to B, and a resistor connects B to D. Initially, no other branches connect to B. Subsequently, a new branch is connected between B and D, containing a rechargeable cell with its positive terminal towards B, in series with a resistance. The source continues to maintain , and all components are ideal apart from the stated resistances.

Which pair gives the ratio of final to initial current supplied by the source and the rate at which chemical energy is stored in the rechargeable cell?

37 / 50

37. Two uniform metallic conductors made of different materials are joined in series and connected to a real cell.

Wire P has length , cross-sectional area , resistivity , and free-electron number density . Wire Q has length , cross-sectional area , resistivity , and free-electron number density . The two wires are connected in series across a real cell having EMF and internal resistance . All resistivities remain constant.

Which pair gives the ratio of electron drift-speed magnitudes in Q and P and the fraction of the cell's chemical-energy conversion rate dissipated in Q?

38 / 50

38. Two real cells P and Q are separately connected across the same external resistor.
Cell P has EMF and internal resistance .
Cell Q has a smaller EMF of , but its internal resistance is only .
All cell parameters remain constant during the experiments.
Define the external power-delivery fraction of a cell as the power dissipated in the external resistor divided by the electrical power generated through the cell's EMF.
Which pair gives the ratio of external powers and the external power-delivery fraction for cell Q?

39 / 50

39. A metallic resistor M has resistance at . Its temperature coefficient of resistance, referred to , is .
M is connected in series with a temperature-independent resistor across an ideal source.
Initially, both resistors are at . Resistor M is then heated while the other resistor remains unchanged.
When the potential difference across M reaches , its temperature is maintained constant.
Which pair gives the new temperature of M and the ratio of its final to initial electrical power?

40 / 50

40. Two uniform metallic wires P and Q have equal lengths and equal cross-sectional areas. Their resistivities at the maintained temperature satisfy

An independent electron-transport experiment establishes that their electron mobilities satisfy

Both wires are then connected in series so that the same steady current passes through them. Assume the elementary relation applies to each wire, with electrons as the mobile charge carriers.
Which pair gives the free-electron number-density ratio and the drift-speed ratio in the series experiment?

41 / 50

41. A long uniform resistive wire is used as a heating element. Its resistance is , and it is connected to an ideal voltage source of potential difference . During a fixed observation interval , it dissipates energy .
The wire is replaced by another uniform wire of the same material and temperature, having twice its original length and twice its original cross-sectional area. The replacement wire is connected to the same ideal source for the same duration.
However, only of the electrical energy dissipated in the replacement wire is transferred to a specified object being heated; the remainder is lost to the surroundings.
Which pair gives the resistance of the replacement wire and the thermal energy transferred to the object?

42 / 50

42. Two rechargeable cells P and Q are connected in parallel with their positive terminals joined and their negative terminals joined.
Cell P has EMF and internal resistance . Cell Q has EMF and internal resistance .
An external resistor of is connected across their common terminals.
Both cells are represented by the ideal EMF-plus-internal-resistance model, and their parameters remain constant.
Which pair gives the common terminal potential difference and the rate at which chemical energy is stored in cell Q?

43 / 50

43. A long cylindrical conductor consists of two coaxial metallic regions joined continuously along their common boundary. The central cylindrical core has radius , while the outer cylindrical surface has radius .

The central core P occupies the circular region from the axis to radius . The surrounding conducting shell Q occupies the annular region from radius to radius . Both regions extend through the same length , and their ends are connected to the same two ideal equipotential terminals. The axial electric field is uniform and has the same magnitude in both regions. The core has free-electron number density and electron mobility . The shell has free-electron number density and electron mobility . The materials have constant properties, and current flows axially.

Which pair gives the fraction of total current carried by the core and the ratio of electron drift speeds in the core and shell?

44 / 50

44. A metre bridge contains a resistance wire composed of two uniform sections of the same length but different resistances per unit length.

The graduated wire is long. Its first , measured from the left end A, has resistance per centimetre , where a is an unknown positive number. The remaining has resistance per centimetre k. The left gap initially contains a resistor and the right gap contains a resistor. The galvanometer gives a null reading at . The two gap resistors are subsequently interchanged without changing the resistance wire.

Which pair gives a and the new balance length?

45 / 50

45. Two ohmic conductors P and Q are maintained at the same constant temperature. Their voltage-current characteristics are described below.

The horizontal axis represents current in amperes, while the vertical axis represents potential difference in volts. Both graphs are straight lines passing through the origin. Line P passes through the point , while line Q passes through . Both lines remain straight over the operating range considered.

If the applied voltage across P is made twice the voltage across Q, which pair gives the resistance ratio and the resulting current ratio ?

46 / 50

46. Two ohmic conductors P and Q are tested separately at the same constant temperature.

For each conductor, the horizontal axis represents applied potential difference and the vertical axis represents current . Both characteristics are straight lines through the origin. The characteristic of P passes through , . The characteristic of Q passes through , . Both conductors remain ohmic over the voltage range considered.

In a new experiment, the applied voltage across P is maintained at exactly half the voltage across Q.
Which pair gives the resulting current ratio and power ratio ?

47 / 50

47. A real cell has EMF and internal resistance .

The cell supplies a resistor P in series with two parallel branches. The upper branch contains a resistor Q, and the lower branch contains a resistor R. A switch can disconnect only the lower branch without changing the other connections. Initially, both branches conduct. The switch is subsequently opened, leaving P and Q in series across the cell terminals.

Which pair gives the ratio of final to initial power dissipated in Q and the final terminal potential difference of the cell?

48 / 50

48. Two ideal cells maintain fixed junction potentials in a network containing three resistors. One conducting branch is then opened.

Junction D is at zero potential. An ideal cell connects D to A, with A positive. A separate ideal rechargeable cell connects D to C, with C positive. A resistor connects A to B, another resistor connects B to C, and a third resistor connects B to D. Initially, all three resistor branches are connected. Subsequently, only the A–B resistor branch is opened completely. All other branches remain connected, and both cells maintain their original EMFs.

Which pair gives the ratio of final to initial heating rate in B–D and the electrical power supplied by the cell after the opening?

49 / 50

49. Two cells with EMFs and have internal resistances and , respectively.

The two cells are connected in series with their EMFs opposing each other, and an external resistor completes the closed loop. The connection is such that the cell drives current through the external resistor and forces current into the positive terminal of the cell. Both cells retain their stated EMFs and internal resistances. Terminal voltage means the potential of a cell's positive terminal relative to its negative terminal.

Which pair gives the current through the external resistor and the terminal potential difference of the cell?

50 / 50

50. A DC network contains four junctions A, B, C and D. Two ideal sources maintain fixed potentials at A and C relative to D.

Junction D is at zero potential. An ideal cell connects D to A, with A as its positive terminal. An ideal rechargeable cell connects D to C, with C as its positive terminal. A resistor connects A to B, a resistor connects B to C, and a resistor connects B to D. Initially, all branches are connected. Subsequently, only the B–D resistor is disconnected completely, leaving all other connections unchanged.

Which pair gives the final potential of junction B and the ratio of final to initial chemical-energy storage rate in the cell?

Your score is

Share your achievement!

LinkedIn Facebook
0%

Complete 100% of the Progressive Test coverage to unlock Mistake Review.
Complete 100% of the Progressive Test coverage to unlock Certificate Challenge.
Subscribe
Notify of
guest
0 Comments
Scroll to Top