301. Assertion: The dimensionless ratio
\[
R=\frac{E}{pV}
\]
has the same numerical value when evaluated using any two consistent coherent unit systems.
Reason: \(E\) and \(pV\) have identical dimensions, so their unit-conversion factors are identical and cancel in the ratio.
ⓐ. Both Assertion and Reason are true, and Reason is the correct explanation of Assertion.
ⓑ. Both Assertion and Reason are true, but Reason is not the correct explanation of Assertion.
ⓒ. Assertion is true, but Reason is false.
ⓓ. Assertion is false, but Reason is true.
Correct Answer: Both Assertion and Reason are true, and Reason is the correct explanation of Assertion.
Explanation: Energy has dimensions
\[
[E]=[ML^2T^{-2}].
\]
Pressure times volume has dimensions
\[
[pV]=[ML^{-1}T^{-2}][L^3]
=[ML^2T^{-2}].
\]
Therefore,
\[
[R]=1.
\]
When the base units are changed consistently, both \(E\) and \(pV\) acquire exactly the same numerical conversion factor. Their ratio consequently retains the same numerical value. For example, if \(E=1.20\times10^2\,\text{J}\), \(p=2.00\times10^5\,\text{Pa}\) and \(V=3.00\times10^{-4}\,\text{m}^3\), then
\[
R=\frac{120}{60}=2.00.
\]
Converting all three quantities consistently to CGS units leaves the ratio \(2.00\). Thus the Reason directly explains the Assertion, and option A is correct.
302. A quantity
\[
X=\frac{P}{\rho A}
\]
is formed from power \(P\), mass density \(\rho\) and area \(A\). Its numerical value is \(8.00\) in SI units. A second quantity is defined by
\[
v=X^{1/3}.
\]
Which pair correctly gives \(X\) and \(v\) in centimetre-second length units?
ⓐ. \(X=8.00\times10^2\,\text{cm}^3\text{s}^{-3}\), \(v=20.0\,\text{cm s}^{-1}\)
ⓑ. \(X=8.00\,\text{cm}^3\text{s}^{-3}\), \(v=2.00\,\text{cm s}^{-1}\)
ⓒ. \(X=8.00\times10^4\,\text{cm}^2\text{s}^{-2}\), \(v=200\,\text{cm s}^{-1}\)
ⓓ. \(X=8.00\times10^6\,\text{cm}^3\text{s}^{-3}\), \(v=200\,\text{cm s}^{-1}\)
Correct Answer: \(X=8.00\times10^6\,\text{cm}^3\text{s}^{-3}\), \(v=200\,\text{cm s}^{-1}\)
Explanation: First determine the dimensions of \(X\):
\[
[P]=[ML^2T^{-3}],
\]
while
\[
[\rho A]=[ML^{-3}][L^2]=[ML^{-1}].
\]
Hence,
\[
[X]=[L^3T^{-3}].
\]
Thus \(X\) has SI unit \(\text{m}^3\text{s}^{-3}\). Since
\[
1\,\text{m}^3=10^6\,\text{cm}^3,
\]
the converted value is
\[
X=8.00\times10^6\,\text{cm}^3\text{s}^{-3}.
\]
Now,
\[
v=X^{1/3},
\]
so in SI units
\[
v=(8.00)^{1/3}\,\text{m s}^{-1}=2.00\,\text{m s}^{-1}.
\]
Exact conversion gives
\[
v=200\,\text{cm s}^{-1}.
\]
Cubing this converted speed indeed reproduces \(8.00\times10^6\,\text{cm}^3\text{s}^{-3}\), providing a consistency check. Hence option D is correct.
303. A physical quantity has dimensional formula
\[
[Q]=[M^aL^bT^c].
\]
Experiments with unit definitions show the following:
I. If only the length unit is made \(10\) times larger, the numerical value of \(Q\) becomes \(1/100\) of its original value.
II. If only the time unit is made \(10\) times larger, the numerical value becomes \(1000\) times its original value.
III. Changing only the mass unit does not change the numerical value.
What is the dimensional formula of \(Q\)?
ⓐ. \([L^2T^{-3}]\)
ⓑ. \([L^{-2}T^3]\)
ⓒ. \([ML^2T^{-3}]\)
ⓓ. \([L^3T^{-2}]\)
Correct Answer: \([L^2T^{-3}]\)
Explanation: If the length unit becomes \(10\) times larger, the derived unit acquires a factor
\[
10^b.
\]
The numerical value changes inversely:
\[
\frac{n'}{n}=10^{-b}.
\]
Given
\[
\frac{n'}{n}=\frac1{100}=10^{-2},
\]
we obtain
\[
b=2.
\]
For time, increasing the time unit by \(10\) gives
\[
\frac{n'}{n}=10^{-c}.
\]
The observed increase by \(1000=10^3\) therefore gives
\[
-c=3,
\]
so
\[
c=-3.
\]
Finally, changing the mass unit has no effect on the numerical value, which implies
\[
a=0.
\]
Hence,
\[
[Q]=[L^2T^{-3}].
\]
This is dimensional inference obtained entirely from observed unit-scaling behaviour. Hence option A is correct.
304. Two candidate expressions are proposed for the same length-like quantity \(Y\):
\[
Y_1=\frac{E}{F},
\qquad
Y_2=\frac{p}{\rho a},
\]
where \(E\) is energy, \(F\) force, \(p\) pressure, \(\rho\) density and \(a\) acceleration.
Statement I: Both candidate expressions have dimensions of length.
Statement II: Converting an observed value of \(Y\) from \(2.00\,\text{m}\) to \(200\,\text{cm}\) can determine which of the two candidate expressions is the physically correct law.
ⓐ. Both Statement I and Statement II are true.
ⓑ. Both Statement I and Statement II are false.
ⓒ. Statement I is true, but Statement II is false.
ⓓ. Statement I is false, but Statement II is true.
Correct Answer: Statement I is true, but Statement II is false.
Explanation: For the first candidate,
\[
\left[\frac{E}{F}\right]
=\frac{[ML^2T^{-2}]}{[MLT^{-2}]}
=[L].
\]
For the second,
\[
[\rho a]=[ML^{-3}][LT^{-2}]
=[ML^{-2}T^{-2}].
\]
Therefore,
\[
\left[\frac{p}{\rho a}\right]
=\frac{[ML^{-1}T^{-2}]}{[ML^{-2}T^{-2}]}
=[L].
\]
Thus both expressions pass the dimensional requirement for a length, so Statement I is true. The conversion
\[
2.00\,\text{m}=200\,\text{cm}
\]
is exact and applies to any physical length regardless of which candidate formula produced it. Unit conversion therefore supplies no new physical information capable of distinguishing the two dimensionally valid expressions. An additional physical principle or experiment would be required. Hence Statement II is false and option C is correct.
305. A dimensional physical quantity \(Q\) has
\[
[Q]=[ML^{-1}T^{-2}]
\]
and numerical value \(4.00\) when the base units are kilogram, metre and second. A new system uses
\[
M'=0.5\,\text{kg},\qquad L'=2\,\text{m},\qquad T'=0.5\,\text{s}.
\]
Which conclusion is correct?
ⓐ. The new numerical value is \(1.00\), proving that \(Q\) is dimensionless.
ⓑ. The new numerical value is \(4.00\); the complete derived-unit scale factor is unchanged.
ⓒ. The new numerical value is \(16.0\), because the time exponent is \(-2\).
ⓓ. The new numerical value is \(0.250\), because the length unit is doubled.
Correct Answer: The new numerical value is \(4.00\); the complete derived-unit scale factor is unchanged.
Explanation: One new compound unit is
\[
Q'=M'(L')^{-1}(T')^{-2}.
\]
Relative to the original unit, its scale factor is
\[
0.5(2)^{-1}(0.5)^{-2}.
\]
Now,
\[
(2)^{-1}=\frac12,
\]
and
\[
(0.5)^{-2}=4.
\]
Therefore,
\[
0.5\times\frac12\times4=1.
\]
So one new unit of \(Q\) is numerically equal in physical size to one old unit of \(Q\). Consequently the same physical quantity retains numerical value
\[
4.00.
\]
This does not make \(Q\) dimensionless; its dimensional formula remains \([ML^{-1}T^{-2}]\). An unchanged numerical value under one specially chosen change of base units can arise from cancellation among dimensional scale factors. Hence option B is correct.
306. A speed \(v\) is assumed to depend on a length \(\ell\), a time \(t\) and an acceleration \(g\) according to
\[
v=k\ell^a t^b g^c,
\]
where \(k\) is dimensionless. Which conclusion follows from dimensional analysis?
ⓐ. \(a=1,\ b=-1,\ c=0\) is the unique solution.
ⓑ. \(a=0,\ b=1,\ c=1\) is the unique solution.
ⓒ. The exponents obey \(a+c=1\) and \(b-2c=-1\), so they are not all determined uniquely.
ⓓ. No values of \(a,\ b,\ c\) can make the relation dimensionally consistent.
Correct Answer: The exponents obey \(a+c=1\) and \(b-2c=-1\), so they are not all determined uniquely.
Explanation: The dimensions of speed are
\[
[v]=[LT^{-1}].
\]
The assumed right-hand side has dimensions
\[
[\ell^a t^b g^c]
=[L]^a[T]^b[LT^{-2}]^c.
\]
Therefore,
\[
[LT^{-1}]=[L^{a+c}T^{b-2c}].
\]
Comparison of length powers gives
\[
a+c=1.
\]
Comparison of time powers gives
\[
b-2c=-1.
\]
There are only two independent dimensional equations for the three unknown exponents \(a,b,c\). Thus one exponent may be chosen freely and the other two expressed in terms of it. For example, \(c=0\) gives \(a=1,b=-1\), while \(c=1/2\) gives another dimensionally valid set. Dimensional analysis therefore cannot produce a unique dependence from the supplied variables. Hence option C is correct.
307. A time period \(T\) depends on a length \(\ell\), an acceleration \(g\), and a dimensionless parameter \(\alpha\). Which is the most general conclusion available from dimensional analysis?
ⓐ. \(T=2\pi\sqrt{\ell/g}\), with the factor \(2\pi\) fixed by dimensions.
ⓑ. \(T=\sqrt{\ell/g}\,f(\alpha)\), with the dimensionless function \(f\) undetermined by dimensions.
ⓒ. \(T=\alpha\ell/g\), with \(\alpha\) supplying the required dimensional balance.
ⓓ. \(T=\sqrt{\ell/g}\), with any dependence on \(\alpha\) forbidden by dimensions.
Correct Answer: \(T=\sqrt{\ell/g}\,f(\alpha)\), with the dimensionless function \(f\) undetermined by dimensions.
Explanation: Using only \(\ell\) and \(g\), let
\[
T\propto \ell^a g^b.
\]
Then
\[
[T]=[L]^a[LT^{-2}]^b=[L^{a+b}T^{-2b}].
\]
Comparison of time powers gives
\[
-2b=1\Rightarrow b=-\frac12.
\]
Comparison of length powers gives
\[
a+b=0\Rightarrow a=\frac12.
\]
Thus the dimensional part of the dependence is
\[
T\propto\sqrt{\frac{\ell}{g}}.
\]
However, \(\alpha\) is dimensionless, so multiplying by any dimensionless function \(f(\alpha)\) does not disturb dimensional homogeneity. Dimensional analysis cannot determine the form of this function or a pure numerical factor such as \(2\pi\). Therefore the most general dimensional conclusion is \(T=\sqrt{\ell/g}\,f(\alpha)\). Hence option B is correct.
308. A length \(x\) is represented by
\[
x=A\ln(1+Bt),
\]
where \(t\) is time. Which statement is correct?
ⓐ. \([A]=[L]\), \([B]=[T^{-1}]\), and \([AB]=[LT^{-1}]\)
ⓑ. \([A]=[L]\), \([B]=[T]\), and \([AB]=[LT]\)
ⓒ. \([A]=1\), \([B]=[T^{-1}]\), and \([AB]=[T^{-1}]\)
ⓓ. \([A]=[LT^{-1}]\), \([B]=[T^{-1}]\), and \([AB]=[LT^{-2}]\)
Correct Answer: \([A]=[L]\), \([B]=[T^{-1}]\), and \([AB]=[LT^{-1}]\)
Explanation: The argument of a logarithmic function must be dimensionless. Therefore the two terms inside
\[
1+Bt
\]
must both be dimensionless. Since \(1\) is dimensionless,
\[
[Bt]=1.
\]
Hence,
\[
[B]=[T^{-1}].
\]
The logarithm itself is dimensionless, so all dimensions of the right-hand side must come from \(A\). Because \(x\) is a length,
\[
[A]=[L].
\]
Therefore,
\[
[AB]=[L][T^{-1}]=[LT^{-1}].
\]
A logarithm cannot meaningfully act on a dimensional argument unless that argument has first been converted into a dimensionless ratio or combination. Hence option A is correct.
309. A quantity \(\Phi\) having dimensions of speed is written as
\[
\Phi=\frac{A+Bt}{1+Ct},
\]
where \(t\) is time. Which set of dimensions is required by homogeneity?
ⓐ. \([A]=[LT^{-1}],\ [B]=[LT^{-2}],\ [C]=[T^{-1}]\)
ⓑ. \([A]=[L],\ [B]=[LT^{-1}],\ [C]=[T]\)
ⓒ. \([A]=[LT^{-1}],\ [B]=[L],\ [C]=[T^{-1}]\)
ⓓ. \([A]=[LT^{-2}],\ [B]=[LT^{-1}],\ [C]=1\)
Correct Answer: \([A]=[LT^{-1}],\ [B]=[LT^{-2}],\ [C]=[T^{-1}]\)
Explanation: The denominator contains
\[
1+Ct.
\]
Terms being added must have identical dimensions, and \(1\) is dimensionless. Therefore,
\[
[Ct]=1,
\]
which gives
\[
[C]=[T^{-1}].
\]
The entire denominator is consequently dimensionless. Hence the numerator must itself have the dimensions of \(\Phi\), namely speed:
\[
[A]=[LT^{-1}].
\]
The term \(Bt\) is added to \(A\), so it too must have dimensions of speed:
\[
[B][T]=[LT^{-1}].
\]
Therefore,
\[
[B]=[LT^{-2}].
\]
As a consistency check,
\[
\frac{B}{AC}
\]
is dimensionless because both \(B\) and \(AC\) have dimensions \([LT^{-2}]\). Hence option A is correct.
310. A time \(T\) is related to a length \(x\) by
\[
T=\sqrt{A+Bx}.
\]
Which conclusion is dimensionally correct?
ⓐ. \([A]=[T],\ [B]=[TL^{-1}]\), so \(A/B\) has dimensions of length.
ⓑ. \([A]=[T^2],\ [B]=[T^2L^{-1}]\), so \(A/B\) has dimensions of length.
ⓒ. \([A]=[L],\ [B]=1\), so \(A/B\) has dimensions of length.
ⓓ. \([A]=[T^{-2}],\ [B]=[L^{-1}T^{-2}]\), so \(A/B\) has dimensions of length.
Correct Answer: \([A]=[T^2],\ [B]=[T^2L^{-1}]\), so \(A/B\) has dimensions of length.
Explanation: Squaring the equation gives
\[
T^2=A+Bx.
\]
Therefore each term on the right must have dimensions
\[
[T^2].
\]
Hence,
\[
[A]=[T^2].
\]
For the second term,
\[
[B][L]=[T^2].
\]
Thus,
\[
[B]=[T^2L^{-1}].
\]
The ratio then has dimensions
\[
\left[\frac{A}{B}\right]
=\frac{[T^2]}{[T^2L^{-1}]}
=[L].
\]
The square-root form does not permit \(A\) and \(Bx\) to have arbitrary different dimensions; their sum must be homogeneous before the root is taken. Hence option B is correct.
311. A force is written as
\[
F=Av^n+B\frac{x}{t^2},
\]
where \(v\) is speed, \(x\) is length and \(t\) is time. The constant \(A\) has dimensions \([ML^{-1}]\). What are \(n\) and the dimensions of \(B\)?
ⓐ. \(n=1,\ [B]=[MT^{-1}]\)
ⓑ. \(n=2,\ [B]=[M]\)
ⓒ. \(n=2,\ [B]=[ML^{-1}]\)
ⓓ. \(n=3,\ [B]=[MT]\)
Correct Answer: \(n=2,\ [B]=[M]\)
Explanation: The first term must independently have the dimensions of force:
\[
[Av^n]=[MLT^{-2}].
\]
Using
\[
[A]=[ML^{-1}]
\]
and
\[
[v^n]=[L^nT^{-n}],
\]
we obtain
\[
[Av^n]=[ML^{n-1}T^{-n}].
\]
Comparison with \([MLT^{-2}]\) gives
\[
n-1=1
\]
and
\[
-n=-2.
\]
Both conditions give
\[
n=2.
\]
For the second term,
\[
\frac{x}{t^2}
\]
has dimensions of acceleration, \([LT^{-2}]\). Therefore \(B\) must contribute one mass dimension so that
\[
[B][LT^{-2}]=[MLT^{-2}].
\]
Hence,
\[
[B]=[M].
\]
Thus option B is correct.
312. Let \(p_m\) denote linear momentum. Which of the following proposed expressions for speed are dimensionally homogeneous?
I. \(\displaystyle v=\frac{Ft+p_m}{m}\)
II. \(\displaystyle v=\frac{E+p_mv}{p_m}\)
III. \(\displaystyle v=\frac{(F+E/\ell)t}{m}\)
IV. \(\displaystyle v=\frac{Ft+E}{m}\)
ⓐ. I and II only
ⓑ. II, III and IV only
ⓒ. I, II and III only
ⓓ. I, II, III and IV
Correct Answer: I, II and III only
Explanation: In expression I,
\[
[Ft]=[MLT^{-1}],
\]
which is the same as momentum. Thus \(Ft+p_m\) is a valid sum, and division by mass gives speed. In expression II,
\[
[p_mv]=[ML^2T^{-2}],
\]
which has the dimensions of energy. Therefore \(E+p_mv\) is homogeneous, and dividing by momentum again gives speed. In expression III,
\[
[E/\ell]=[MLT^{-2}],
\]
which has force dimensions. Hence \(F+E/\ell\) is a valid sum; multiplying by \(t\) gives momentum and division by \(m\) gives speed. In expression IV, however, \(Ft\) has momentum dimensions while \(E\) has energy dimensions. These unlike quantities cannot be added. Therefore I, II and III only survive the dimensional test, so option C is correct.
313. A displacement \(s\) is represented by
\[
s=A\ln\left(\frac{v}{v_0}\right)+Bt,
\]
where \(v\) and \(v_0\) are speeds and \(t\) is time. Which statement is correct?
ⓐ. \([A]=[L],\ [B]=[LT^{-1}]\), and \(B/A\) has dimensions \([T^{-1}]\)
ⓑ. \([A]=1,\ [B]=[L]\), and \(B/A\) has dimensions \([L]\)
ⓒ. \([A]=[LT^{-1}],\ [B]=[L]\)
ⓓ. \(v/v_0\) must have dimensions of speed for the logarithm to be meaningful
Correct Answer: \([A]=[L],\ [B]=[LT^{-1}]\), and \(B/A\) has dimensions \([T^{-1}]\)
Explanation: Since \(v\) and \(v_0\) are both speeds,
\[
\frac{v}{v_0}
\]
is dimensionless. Therefore it is a valid argument of the logarithm. The logarithm itself is dimensionless, so the coefficient \(A\) must supply the dimensions of the first displacement term:
\[
[A]=[L].
\]
The second term \(Bt\) is added to this first term and must also have dimensions of length:
\[
[B][T]=[L].
\]
Hence,
\[
[B]=[LT^{-1}].
\]
Therefore,
\[
\left[\frac{B}{A}\right]
=\frac{[LT^{-1}]}{[L]}
=[T^{-1}].
\]
The use of the ratio \(v/v_0\), rather than a dimensional speed alone, is essential for dimensional validity of the logarithm. Hence option A is correct.
314. A force is represented as
\[
F=Av^2\sin\left(\frac{Bx}{v}\right),
\]
where \(v\) is speed and \(x\) is length. What are the dimensions of \(A/B\)?
ⓐ. \([ML^{-1}]\)
ⓑ. \([ML^{-1}T]\)
ⓒ. \([MT^{-1}]\)
ⓓ. \([LT^{-1}]\)
Correct Answer: \([ML^{-1}T]\)
Explanation: The sine argument must be dimensionless:
\[
\left[\frac{Bx}{v}\right]=1.
\]
Now,
\[
\left[\frac{x}{v}\right]
=\frac{[L]}{[LT^{-1}]}
=[T].
\]
Therefore,
\[
[B]=[T^{-1}].
\]
The sine factor itself is dimensionless, so
\[
[Av^2]=[F].
\]
Hence,
\[
[A]
=\frac{[MLT^{-2}]}{[L^2T^{-2}]}
=[ML^{-1}].
\]
Thus,
\[
\left[\frac{A}{B}\right]
=\frac{[ML^{-1}]}{[T^{-1}]}
=[ML^{-1}T].
\]
Both the amplitude-like coefficient and the argument coefficient must be analysed separately. Hence option B is correct.
315. A length \(y\) is written as
\[
y=A\exp(-Bx^nt),
\]
where \(x\) is length and \(t\) is time. If
\[
[B]=[L^{-2}T^{-1}],
\]
what are \(n\) and the dimensions of \(A\)?
ⓐ. \(n=1,\ [A]=1\)
ⓑ. \(n=2,\ [A]=[L]\)
ⓒ. \(n=3,\ [A]=[LT^{-1}]\)
ⓓ. \(n=2,\ [A]=[T]\)
Correct Answer: \(n=2,\ [A]=[L]\)
Explanation: The exponent of an exponential function must be dimensionless. Therefore,
\[
[Bx^nt]=1.
\]
Using the supplied dimensions,
\[
[Bx^nt]
=[L^{-2}T^{-1}][L^n][T]
=[L^{n-2}].
\]
For this to be dimensionless,
\[
n-2=0.
\]
Hence,
\[
n=2.
\]
The exponential factor itself has no dimensions. Therefore all dimensions of \(y\) must come from the coefficient \(A\). Since \(y\) is a length,
\[
[A]=[L].
\]
Thus both the exponent condition and the overall dimensional condition are satisfied only by option B.
316. A length-like quantity \(Y\) depends on a length \(x\) and a dimensionless parameter \(\alpha\). Three proposed relations are
\[
Y_1=x\sin\alpha,\qquad
Y_2=xe^{-\alpha},\qquad
Y_3=x(1+\alpha).
\]
Which conclusion can dimensional analysis provide?
ⓐ. Only \(Y_1\) is possible because trigonometric functions are allowed in dimensional equations.
ⓑ. Only \(Y_2\) is possible because exponentials are dimensionless.
ⓒ. Only \(Y_3\) is possible because sums are required by homogeneity.
ⓓ. All three are dimensionally admissible; dimensions alone cannot select the actual dependence on the dimensionless parameter.
Correct Answer: All three are dimensionally admissible; dimensions alone cannot select the actual dependence on the dimensionless parameter.
Explanation: The parameter \(\alpha\) is dimensionless. Therefore \(\sin\alpha\) is dimensionless. The exponential \(e^{-\alpha}\) is also dimensionless. Likewise,
\[
1+\alpha
\]
is a valid dimensionless sum. Multiplication of \(x\) by any of these three dimensionless factors produces a quantity with dimensions \([L]\). Thus all three proposed expressions satisfy dimensional homogeneity. Dimensional analysis can reject an expression containing a dimensionally invalid function argument, but it cannot determine the actual functional form of a dependence on a dimensionless variable. Experimental information or a physical derivation would be required to distinguish the three cases. Hence option D is correct.
317. A force \(F\) is assumed to depend only on density \(\rho\), area \(A\), and two speeds \(u\) and \(v\):
\[
F=k\rho^aA^bu^cv^d.
\]
Which is the most complete dimensional conclusion?
ⓐ. The unique solution is \(a=1,\ b=1,\ c=1,\ d=1\).
ⓑ. The unique solution is \(a=1,\ b=1,\ c=2,\ d=0\).
ⓒ. \(a=b=1\) and \(c+d=2\); \(c\) and \(d\) are not individually fixed by dimensions.
ⓓ. No dimensionally consistent combination of the four exponents exists.
Correct Answer: \(a=b=1\) and \(c+d=2\); \(c\) and \(d\) are not individually fixed by dimensions.
Explanation: Force has dimensions
\[
[F]=[MLT^{-2}].
\]
The right-hand side has dimensions
\[
[M^aL^{-3a}][L^{2b}][L^cT^{-c}][L^dT^{-d}].
\]
Comparison of mass powers gives
\[
a=1.
\]
Comparison of time powers gives
\[
c+d=2.
\]
Comparison of length powers gives
\[
-3a+2b+c+d=1.
\]
Using \(a=1\) and \(c+d=2\),
\[
-3+2b+2=1,
\]
so
\[
b=1.
\]
However, dimensional analysis supplies only the sum \(c+d=2\), not the two speed exponents separately, because \(u\) and \(v\) have identical dimensions. Their ratio \(u/v\) is dimensionless, so an arbitrary dimensionless function of this ratio may remain. Therefore a general form is \(\rho Av^2f(u/v)\), and option C is correct.
318. Three candidate equations for displacement are
\[
s_1=ut+\frac12at^2,\qquad
s_2=ut-\frac12at^2,\qquad
s_3=ut+3at^2.
\]
What can dimensional analysis conclude?
ⓐ. Only \(s_1\) is valid because \(1/2\) is the correct dimensionless coefficient.
ⓑ. Only \(s_2\) is valid because dimensional analysis determines the sign.
ⓒ. All three are dimensionally homogeneous; dimensions cannot determine the numerical coefficient or the sign.
ⓓ. None is homogeneous because \(ut\) and \(at^2\) contain different powers of time.
Correct Answer: All three are dimensionally homogeneous; dimensions cannot determine the numerical coefficient or the sign.
Explanation: The first term has dimensions
\[
[ut]=[LT^{-1}][T]=[L].
\]
The second type of term has dimensions
\[
[at^2]=[LT^{-2}][T^2]=[L].
\]
Thus \(ut\) and \(at^2\) may be added or subtracted without violating dimensional homogeneity. The pure numbers \(1/2\) and \(3\) are dimensionless and do not affect dimensional consistency. A change from plus to minus also leaves dimensions untouched. Therefore all three candidate expressions pass the dimensional test. This does not mean all three are physically correct descriptions of the same motion. Dimensional analysis cannot determine dimensionless numerical coefficients or algebraic signs. Those features must come from the physical derivation or experiment. Hence option C is correct.
319. A length \(L\) is assumed to depend on an energy \(E\), a torque-like quantity \(\tau\), and a reference length \(r\):
\[
L=kE^a\tau^br^c.
\]
Energy and \(\tau\) have the same dimensional formula \([ML^2T^{-2}]\). Which conclusion follows?
ⓐ. \(a=1,\ b=-1,\ c=1\) is the unique solution.
ⓑ. \(a=b=0,\ c=1\) is the unique solution.
ⓒ. No relation is possible because energy and torque cannot appear together.
ⓓ. Dimensional analysis gives \(a+b=0\) and \(c=1\), but cannot determine \(a\) and \(b\) separately.
Correct Answer: Dimensional analysis gives \(a+b=0\) and \(c=1\), but cannot determine \(a\) and \(b\) separately.
Explanation: The right-hand side has dimensions
\[
[ML^2T^{-2}]^{a+b}[L]^c.
\]
The left-hand side has dimensions \([L]\). Comparing mass powers gives
\[
a+b=0.
\]
The time equation gives the same condition and supplies no new independent information. With \(a+b=0\), the contribution of \(E^a\tau^b\) becomes dimensionless because energy and torque share the same dimensions. The length equation therefore reduces to
\[
c=1.
\]
Nothing in the dimensional equations fixes \(a\) and \(b\) separately. Since \(E/\tau\) is dimensionless, the most general dimensional statement may contain an arbitrary function of that ratio:
\[
L=r\,f(E/\tau).
\]
Thus equal-dimensional independent variables can create an underdetermined exponent problem. Hence option D is correct.
320. Two different relations contain constants \(k_1\) and \(k_2\):
\[
F=k_1x
\]
and
\[
F=mg(1+k_2x),
\]
where \(x\) is length. Which statement is correct?
ⓐ. Both \(k_1\) and \(k_2\) are dimensionless because they are constants.
ⓑ. \([k_1]=[MT^{-2}]\) and \([k_2]=[L^{-1}]\).
ⓒ. \([k_1]=[MLT^{-2}]\) and \(k_2\) is dimensionless.
ⓓ. \([k_1]=[L^{-1}]\) and \([k_2]=[MT^{-2}]\).
Correct Answer: \([k_1]=[MT^{-2}]\) and \([k_2]=[L^{-1}]\).
Explanation: In the first relation,
\[
F=k_1x.
\]
Therefore,
\[
[k_1]=\frac{[F]}{[x]}
=\frac{[MLT^{-2}]}{[L]}
=[MT^{-2}].
\]
Thus \(k_1\) is a dimensional constant. In the second relation, the quantity inside the parentheses must be dimensionless because it multiplies \(mg\), which already has force dimensions. Therefore,
\[
[k_2x]=1.
\]
Since \([x]=[L]\),
\[
[k_2]=[L^{-1}].
\]
A symbol being called a constant does not imply that it is dimensionless. Its dimensions are determined by the role it plays in the physical equation. Hence option B is correct.