201. Aniline is first treated with ethanoyl chloride and pyridine to produce acetanilide.
The isolated acetanilide is divided into three portions.
Portion P is subjected directly to the carbylamine test.
Portion Q is hydrolysed completely and the resulting organic product is liberated from its salt before the carbylamine test.
Portion R is reduced completely with \(\mathrm{LiAlH_4}\), followed by hydrolytic work-up, and its organic product is subjected to the carbylamine test.
Which statement is correct?
ⓐ. All three portions give positive carbylamine tests because each product contains nitrogen.
ⓑ. P and R give positive tests, whereas Q gives a negative test.
ⓒ. Only Q gives a positive test because hydrolysis regenerates the primary amino group, while reduction produces a secondary amine.
ⓓ. Q and R both give positive tests because both hydrolysis and amide reduction remove the acetyl carbon atoms.
Correct Answer: Only Q gives a positive test because hydrolysis regenerates the primary amino group, while reduction produces a secondary amine.
Explanation: Aniline is a primary aromatic amine that gives the characteristic carbylamine reaction.
Acetylation converts it into acetanilide, an amide in which nitrogen is directly bonded to a carbonyl carbon.
This changes the chemical functionality available for the diagnostic test.
\(\textbf{Portion P — Unchanged acetanilide:}\)
Acetanilide is not a free primary amine.
Its nitrogen lone pair is involved in amide resonance and it does not undergo the normal primary-amine carbylamine reaction.
Therefore, P gives a negative test.
\(\textbf{Portion Q — Hydrolysis:}\)
Complete hydrolysis cleaves the N-acetyl linkage and regenerates aniline after suitable work-up.
\[
\mathrm{C_6H_5NHCOCH_3\xrightarrow{hydrolysis}C_6H_5NH_2}
\]
The regenerated aniline possesses a primary aromatic amino group and gives a positive carbylamine reaction.
\(\textbf{Portion R — Amide reduction:}\)
Lithium aluminium hydride converts the acetyl carbonyl carbon into a methylene carbon.
\[
\mathrm{C_6H_5NHCOCH_3\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5NHCH_2CH_3}
\]
The product is N-ethylaniline, a secondary aromatic amine.
Secondary amines do not give the normal carbylamine reaction.
Therefore, R gives a negative test.
The distinction demonstrates that hydrolysis restores the original primary amino group, whereas amide reduction permanently converts the acetyl fragment into an ethyl substituent.
The identical starting amide can consequently produce compounds with different diagnostic reactions depending on the subsequent reagent.
202. Two substituted anilines P and Q have their aqueous basicities compared.
P contains a para-methyl group, while Q contains a para-nitro group.
The student proposes the following conclusions.
Statement I: The para-methyl group generally increases electron density and can favour the basicity of P relative to unsubstituted aniline.
Statement II: The para-nitro group withdraws electron density and generally weakens the basicity of Q relative to aniline.
Statement III: The stronger base must always undergo electrophilic aromatic substitution faster under any acidic reaction conditions because basicity and ring activation are identical properties.
Statement IV: Strongly acidic conditions can protonate the amino group and change its directing influence during aromatic substitution.
Which combination is correct?
ⓐ. I, II and III only
ⓑ. II, III and IV only
ⓒ. I, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: The basic strength of an aromatic amine depends partly on the electron density available at nitrogen.
Substituents on the aromatic ring can influence that electron density through inductive and resonance effects.
Statement I is correct because a methyl group generally releases electron density.
At the para position, it tends to increase the basicity of the corresponding substituted aniline relative to aniline.
Statement II is correct because the nitro group is strongly electron withdrawing.
It reduces electron density within the aromatic system and weakens the proton-accepting character of the amino group under comparable conditions.
Statement III is incorrect because aqueous basicity and aromatic electrophilic substitution are different chemical properties.
Aqueous basicity involves equilibrium between an amine and its conjugate acid, including solvent stabilization.
Electrophilic aromatic substitution depends on ring electron density, the electrophile and the actual substituent state under the reaction conditions.
A stronger aqueous base is not automatically the faster aromatic substitution substrate in every possible acidic medium.
Statement IV is correct because a free amino group can become protonated in strongly acidic conditions.
The resulting anilinium group lacks the nitrogen lone-pair donation responsible for the strong ortho/para activation of neutral aniline.
This change can alter both the rate and the orientation of aromatic substitution.
The complete interpretation therefore requires attention to the aromatic substituent effects and to the protonation state established by the reaction medium.
203. A compound X has the structure \(\mathrm{CH_3CH_2NHCH_2CH_2OH}\).
It is treated first with sufficient ethanoyl chloride and pyridine under conditions that selectively N-acetylate the secondary amino group while leaving the hydroxyl group unchanged.
The resulting amide is then reduced completely with \(\mathrm{LiAlH_4}\) in dry ether, followed by hydrolytic work-up.
Assume the hydroxyl-containing carbon framework remains unchanged during both stages.
Which statement correctly identifies the final nitrogen-containing product?
ⓐ. \(\mathrm{CH_3CH_2NHCH_2CH_2OH}\), a secondary amine
ⓑ. \(\mathrm{(CH_3CH_2)_2NCH_2CH_2OH}\), a tertiary amine
ⓒ. \(\mathrm{CH_3N(CH_2CH_2OH)_2}\), a tertiary amine
ⓓ. \(\mathrm{CH_3CH_2N(CH_3)CH_2CH_2OH}\), a tertiary amine
Correct Answer: \(\mathrm{(CH_3CH_2)_2NCH_2CH_2OH}\), a tertiary amine
Explanation: The starting compound contains one secondary amino group and one hydroxyl group.
Its nitrogen is bonded to an ethyl group and a 2-hydroxyethyl group.
It also contains one N–H bond.
The stipulated selectivity ensures that the first reaction occurs at nitrogen rather than producing an O-acetyl derivative.
\(\textbf{Stage 1 — Selective N-acetylation:}\)
Ethanoyl chloride introduces the acetyl group onto nitrogen.
\[
\mathrm{CH_3CH_2NHCH_2CH_2OH+CH_3COCl\longrightarrow CH_3CH_2N(COCH_3)CH_2CH_2OH+HCl}
\]
The product is a tertiary amide because its nitrogen has no remaining N–H bond.
Pyridine removes the hydrogen chloride formed during acylation.
\(\textbf{Stage 2 — Reduction of the amide carbonyl:}\)
Lithium aluminium hydride converts the amide carbonyl carbon into a methylene carbon.
The N-acetyl substituent is consequently converted into an N-ethyl substituent.
\[
\mathrm{CH_3CH_2N(COCH_3)CH_2CH_2OH\xrightarrow[\text{work-up}]{LiAlH_4}(CH_3CH_2)_2NCH_2CH_2OH}
\]
The final nitrogen is bonded to two ethyl groups and one 2-hydroxyethyl group.
It therefore belongs to a tertiary amino group.
The hydroxyl group remains present under the stipulated conditions.
The N-acetyl carbonyl carbon is retained in the final organic structure rather than being removed by hydrolysis.
The key inference is that reduction transforms the introduced two-carbon acyl fragment into a two-carbon alkyl substituent.
Consequently, the secondary starting amine becomes a tertiary amine without changing the original hydroxyl-containing chain.
204. A chemist compares three nitrogen-containing compounds under identical qualitative conditions:
P: N-Methylaniline
Q: N-Phenylethanamide
R: N,N-Dimethylaniline
The following conclusions are proposed.
Statement I: P contains a secondary aromatic amino group and can undergo ordinary N-acylation through replacement of an N–H hydrogen.
Statement II: Q contains an amide nitrogen, whose lone-pair availability is substantially reduced through carbonyl conjugation.
Statement III: R can undergo protonation and suitable quaternisation despite possessing no N–H bond.
Statement IV: All three compounds must have identical aromatic ring activation because each contains nitrogen directly bonded to a phenyl group.
Statement V: Only Q must give a positive carbylamine test because an amide nitrogen is directly attached to a carbonyl carbon.
Which combination is correct?
ⓐ. I, II and IV only
ⓑ. II, III and V only
ⓒ. I, II and III only
ⓓ. I, III and V only
Correct Answer: I, II and III only
Explanation: The three compounds contain nitrogen attached to an aromatic framework but differ in their complete nitrogen bonding environments.
Statement I is correct because N-methylaniline has one phenyl group, one methyl group and one hydrogen attached to nitrogen.
It is a secondary aromatic amine.
Its remaining N–H bond permits ordinary N-acylation with suitable reagents.
Statement II is correct because N-phenylethanamide contains a carbonyl group directly bonded to nitrogen.
The nitrogen lone pair participates in amide resonance, reducing ordinary amine-like nucleophilicity and basicity.
Statement III is correct because N,N-dimethylaniline is a tertiary aromatic amine with three carbon-containing substituents.
It has no N–H bond but retains a nitrogen lone pair in its neutral form.
Consequently, it can accept a proton from a suitable acid and undergo quaternisation with an appropriate alkyl halide.
Statement IV is incorrect because the electronic influence of nitrogen on the aromatic ring depends on its other substituents and its lone-pair availability.
An N-acyl group modifies the resonance donation of the nitrogen atom, while N-methyl substitution produces a different electronic environment.
Statement V is incorrect because the carbylamine reaction is characteristic of primary amines, not ordinary amides.
P is secondary, Q is an amide and R is tertiary; none possesses a free primary amino group.
The correct interpretation requires distinguishing amine degree, amide functionality, protonation and N–H-dependent reactions.
Shared direct attachment of nitrogen to a phenyl group does not make their chemical behaviour identical.
205. Aqueous methanamine is added gradually to a solution of ferric chloride. A reddish-brown precipitate appears. In a separate experiment, methanaminium chloride is added to another portion of ferric chloride solution without adding any alkali.
Consider the following statements.
Statement I: Methanamine can accept a proton from water, increasing the concentration of hydroxide ions.
Statement II: The reddish-brown precipitate is hydrated ferric oxide, commonly represented as \(\mathrm{Fe(OH)_3}\).
Statement III: Methanaminium chloride must produce the same precipitate because it contains the same carbon–nitrogen framework as methanamine.
Statement IV: The observation with methanamine demonstrates its basic character rather than a direct replacement of chloride by an amino group.
Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, II and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and IV only
Explanation: Methanamine is a weak base because its nitrogen atom possesses an available lone pair.
In aqueous solution, it establishes an equilibrium with water.
\[
\mathrm{CH_3NH_2+H_2O\rightleftharpoons CH_3NH_3^++OH^-}
\]
Statement I is correct because this equilibrium produces hydroxide ions.
Ferric ions react with hydroxide ions to form a reddish-brown precipitate of hydrated ferric oxide.
\[
\mathrm{Fe^{3+}+3OH^-\longrightarrow Fe(OH)_3\downarrow}
\]
Statement II is therefore correct.
Statement III is incorrect because methanaminium chloride contains protonated nitrogen.
Its nitrogen lone pair has already been used to form an additional N–H bond.
The salt does not generate the same basic aqueous conditions as the corresponding free amine.
The identical carbon framework does not imply identical acid–base behaviour.
Statement IV is correct because the precipitate results from hydroxide-ion generation and subsequent ferric hydroxide formation.
No new carbon–nitrogen bond is formed in this precipitation process.
This NCERT observation provides evidence that an amine can behave as a base even when it does not contain hydroxide ions in its molecular formula.
The decisive distinction is between the free amine and its protonated ammonium salt.
206. A solution contains \(0.180\,\mathrm{mol}\) of methanamine. It is mixed with a solution containing \(0.080\,\mathrm{mol}\) of ferric chloride.
Assume that methanamine is the only source of hydroxide ions, that ferric hydroxide precipitation is quantitative, and that three moles of methanamine are required per mole of ferric hydroxide formed.
Given:
Molar mass of \(\mathrm{Fe(OH)_3}=107\,\mathrm{g\,mol^{-1}}\).
What is the mass of ferric hydroxide precipitated?
ⓐ. \(6.42\,\mathrm{g}\)
ⓑ. \(8.56\,\mathrm{g}\)
ⓒ. \(5.35\,\mathrm{g}\)
ⓓ. \(4.28\,\mathrm{g}\)
Correct Answer: \(6.42\,\mathrm{g}\)
Explanation: Methanamine produces hydroxide ions through its basic interaction with water.
Ferric ions consume these hydroxide ions to form ferric hydroxide.
The calculation requires identifying the limiting reagent before determining the precipitate mass.
\(\textbf{Overall precipitation relation:}\)
The idealised net reaction is:
\[
\mathrm{FeCl_3+3CH_3NH_2+3H_2O\longrightarrow Fe(OH)_3+3CH_3NH_3Cl}
\]
The stoichiometric ratio is:
\[
\mathrm{FeCl_3:CH_3NH_2:Fe(OH)_3}=1:3:1
\]
\(\textbf{Methanamine required for all ferric chloride:}\)
\[
n_{\mathrm{CH_3NH_2,required}}=3n_{\mathrm{FeCl_3}}
\]
\[
=3(0.080)
\]
\[
=0.240\,\mathrm{mol}
\]
Only \(0.180\,\mathrm{mol}\) of methanamine is available.
Therefore, methanamine is the limiting reagent.
\(\textbf{Ferric hydroxide formed:}\)
\[
n_{\mathrm{Fe(OH)_3}}=\frac{n_{\mathrm{CH_3NH_2}}}{3}
\]
\[
=\frac{0.180}{3}
\]
\[
=0.060\,\mathrm{mol}
\]
\(\textbf{Mass calculation:}\)
\[
m_{\mathrm{Fe(OH)_3}}=nM
\]
\[
=0.060\times107
\]
\[
=6.42\,\mathrm{g}
\]
\(\textbf{Limiting-reagent check:}\)
The reaction consumes \(0.060\,\mathrm{mol}\) of ferric chloride.
\[
n_{\mathrm{FeCl_3,remaining}}=0.080-0.060
\]
\[
=0.020\,\mathrm{mol}
\]
Thus, the supplied ferric chloride is sufficient, while methanamine limits precipitation.
Counting ferric chloride as the limiting reagent would incorrectly give a larger precipitate mass.
The result follows from combining amine basicity with ferric hydroxide precipitation stoichiometry.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{Fe(OH)_3}}=6.42\,\mathrm{g}}
\]
207. An unknown aqueous solution X contains one of the following nitrogen-containing species:
P: Methanamine
Q: Methanaminium chloride
R: N-Methylmethanamine
S: N,N-Dimethylmethanamine
The solution is found to be basic and gives a reddish-brown precipitate on addition of ferric chloride under suitable conditions.
Which conclusion is justified by this observation alone?
ⓐ. X must be methanamine because only primary amines can produce hydroxide ions in water.
ⓑ. X must be N,N-dimethylmethanamine because tertiary amines are the only amines that react with ferric chloride.
ⓒ. X must be a secondary amine because ferric hydroxide precipitation requires exactly one nitrogen-bound hydrogen atom.
ⓓ. The observation supports the presence of a sufficiently basic free amine but does not uniquely distinguish primary, secondary and tertiary amines.
Correct Answer: The observation supports the presence of a sufficiently basic free amine but does not uniquely distinguish primary, secondary and tertiary amines.
Explanation: Ferric hydroxide precipitation depends on the availability of hydroxide ions in the aqueous medium.
A neutral amine can behave as a weak base by accepting a proton from water.
This produces the corresponding ammonium ion and hydroxide ions.
The hydroxide ions can precipitate ferric hydroxide from a suitable ferric salt solution.
Methanamine is a primary amine and can participate in this process.
N-Methylmethanamine is a secondary amine but also possesses a nitrogen lone pair.
N,N-Dimethylmethanamine is a tertiary amine and likewise possesses a lone pair in its neutral form.
Therefore, primary-amine character is not an essential requirement for this acid–base behaviour.
The different amines may produce different equilibrium hydroxide concentrations because their basic strengths differ.
Nevertheless, a positive ferric hydroxide precipitation observation is not intrinsically specific to one substitution degree.
Methanaminium chloride differs because its nitrogen is already protonated and its aqueous solution is not equivalent to free methanamine.
The observation can therefore provide evidence of basicity without uniquely identifying the number of nitrogen-bound carbon groups.
A carbylamine reaction, suitable Hinsberg observations or other complementary evidence would be needed for substitution-degree identification.
This distinction prevents a general test of basic behaviour from being misinterpreted as a specific test for primary amines.
208. An organic mixture contains aniline, phenol and toluene dissolved in ether.
The following separation sequence is proposed:
Stage I: Extract the mixture with dilute aqueous hydrochloric acid and separate the aqueous layer.
Stage II: Extract the remaining ether layer with aqueous sodium hydroxide and separate the new aqueous layer.
Stage III: Regenerate the neutral organic compounds from the two aqueous extracts using appropriate acid–base work-up.
Which statement correctly identifies the principal component separated during each extraction?
ⓐ. HCl extracts phenol first; NaOH subsequently extracts aniline; toluene remains in ether.
ⓑ. HCl extracts aniline first; NaOH subsequently extracts phenol; toluene remains in ether.
ⓒ. HCl extracts toluene first; NaOH subsequently extracts aniline; phenol remains in ether.
ⓓ. HCl extracts both aniline and phenol as ammonium salts; NaOH subsequently extracts toluene.
Correct Answer: HCl extracts aniline first; NaOH subsequently extracts phenol; toluene remains in ether.
Explanation: The mixture contains three organic compounds with different acid–base properties.
Aniline is a weak organic base because its nitrogen atom possesses a lone pair.
Phenol is a weak organic acid because its O–H proton can be removed by a sufficiently strong base.
Toluene is a neutral aromatic hydrocarbon under the stated extraction conditions.
\(\textbf{Stage I — Acid extraction:}\)
Dilute hydrochloric acid protonates aniline.
\[
\mathrm{C_6H_5NH_2+HCl\longrightarrow[C_6H_5NH_3]^+Cl^-}
\]
The ionic anilinium salt preferentially enters the aqueous acidic layer.
Phenol and toluene remain predominantly in the ether layer.
\(\textbf{Stage II — Base extraction:}\)
Aqueous sodium hydroxide converts phenol into its sodium salt.
\[
\mathrm{C_6H_5OH+NaOH\longrightarrow C_6H_5ONa+H_2O}
\]
The phenoxide salt preferentially enters the alkaline aqueous layer.
Toluene remains in ether because it does not undergo either ordinary protonation or deprotonation under these conditions.
\(\textbf{Stage III — Regeneration:}\)
Adding sufficient base to the acidic anilinium extract regenerates neutral aniline.
Acidifying the alkaline phenoxide extract regenerates phenol.
Thus, each extraction uses reversible salt formation to change a component's partitioning behaviour.
The order of treatment matters because acid and base selectively target different functional groups.
The separation demonstrates why amine basicity can be useful in distinguishing nitrogen-containing compounds from nonbasic organic substances.
209. Two samples containing the same amount of aniline are treated differently.
Sample P is dissolved in water and acidified with sufficient hydrochloric acid.
Sample Q is dissolved in a nonaqueous solvent and treated with benzoyl chloride in the presence of pyridine.
The resulting nitrogen-containing products are isolated.
Which statement correctly compares their nitrogen lone-pair environments and the possibility of regenerating aniline?
ⓐ. Both products contain an amide carbonyl group and require complete amide hydrolysis for regeneration.
ⓑ. P is anilinium chloride, reversed by deprotonation; Q is benzanilide, reversed by N-benzoyl cleavage.
ⓒ. P contains benzanilide and can regenerate aniline with sodium hydroxide through simple deprotonation; Q contains anilinium chloride.
ⓓ. Both products are neutral amines because aniline cannot undergo covalent acylation at nitrogen.
Correct Answer: P is anilinium chloride, reversed by deprotonation; Q is benzanilide, reversed by N-benzoyl cleavage.
Explanation: Aniline can participate in proton transfer and covalent N-acylation, but these transformations are chemically different.
In Sample P, hydrochloric acid supplies a proton to the nitrogen lone pair.
\[
\mathrm{C_6H_5NH_2+HCl\longrightarrow[C_6H_5NH_3]^+Cl^-}
\]
The product is anilinium chloride.
Its nitrogen possesses an additional N–H bond and no free lone pair.
Sufficient aqueous sodium hydroxide can remove the added proton and regenerate neutral aniline.
This regeneration does not require cleavage of any N–C bond.
In Sample Q, benzoyl chloride transfers a benzoyl group to the amino nitrogen.
\[
\mathrm{C_6H_5NH_2+C_6H_5COCl\longrightarrow C_6H_5NHCOC_6H_5+HCl}
\]
Pyridine removes the hydrogen chloride formed.
The product is N-phenylbenzamide, also called benzanilide.
Its nitrogen lone pair participates in resonance with the adjacent carbonyl group.
Regenerating aniline requires removal of the covalently attached benzoyl group through a suitable cleavage reaction, such as amide hydrolysis.
Simple deprotonation cannot reverse benzoylation because an N–C bond has been formed.
The distinction is between reversible salt formation and covalent functional-group conversion.
The same starting amine therefore yields products with different bonding environments and different requirements for recovery.
210. Three molecules contain an amino nitrogen attached to a carbon framework:
P: \(\mathrm{CH_3NH_2}\)
Q: \(\mathrm{CF_3CH_2NH_2}\)
R: \(\mathrm{CH_3CH_2NH_2}\)
Assume the comparison is restricted to the inductive effects of the substituents, without making an unsupported exact aqueous basicity ranking.
Which statement correctly interprets their electronic influences?
ⓐ. Q's trifluoromethyl-containing group withdraws inductively, unlike the generally electron-releasing alkyl groups in P and R.
ⓑ. The fluorine atoms in Q necessarily make nitrogen more electron rich because fluorine contains lone pairs.
ⓒ. All three carbon-containing substituents exert identical inductive effects because each amino group is primary.
ⓓ. The ethyl group in R withdraws electron density more strongly than the trifluoromethyl-containing group in Q because it contains more carbon atoms.
Correct Answer: Q's trifluoromethyl-containing group withdraws inductively, unlike the generally electron-releasing alkyl groups in P and R.
Explanation: All three compounds contain primary amino groups because each nitrogen atom is bonded to one carbon-containing group.
However, their carbon substituents differ in electronic character.
An ordinary methyl or ethyl group generally exhibits a positive inductive effect.
This effect tends to push electron density toward the nitrogen atom.
In P and R, the electron-releasing alkyl groups therefore contribute to the availability of the nitrogen lone pair.
Compound Q contains a strongly electron-withdrawing trifluoromethyl region within its carbon framework.
The fluorine atoms are highly electronegative and exert a negative inductive influence through sigma bonds.
This influence can reduce electron density transmitted toward the amino nitrogen.
The presence of lone pairs on fluorine does not imply direct resonance donation to nitrogen through the intervening saturated carbon framework.
Likewise, simply counting carbon atoms does not determine the direction of an inductive effect.
Only electronic effects can be inferred from the supplied information.
An exact aqueous basicity order would additionally require consideration of solvation and other relevant factors.
Consequently, the supported conclusion concerns the different electron-releasing and electron-withdrawing influences, not an absolute ranking inferred from amine degree alone.
This comparison demonstrates that two primary amines can possess different nitrogen electron densities despite sharing the same \(\mathrm{-NH_2}\) functional group.
211. Consider the following sequence beginning with methanamine:
\[
\mathrm{CH_3NH_2\xrightarrow{CH_3COCl/pyridine}P
\xrightarrow[\text{work-up}]{LiAlH_4}Q}
\]
The product Q is then treated with nitrous acid under suitable conditions for its amine class.
Which statement correctly describes the transformation and the characteristic nitrous-acid product?
ⓐ. Q is ethanamine and liberates nitrogen with ethanol formation.
ⓑ. Q is N-methylethanamine and can form an N-nitroso derivative.
ⓒ. Q is trimethylamine and produces an arenediazonium salt.
ⓓ. Q is methanamine and undergoes quantitative nitrogen evolution.
Correct Answer: Q is N-methylethanamine and can form an N-nitroso derivative.
Explanation: Methanamine begins as a primary aliphatic amine containing one methyl group attached to nitrogen.
It possesses two nitrogen-bound hydrogen atoms.
Acetyl chloride replaces one N–H hydrogen with an acetyl group.
\(\textbf{Formation of the amide intermediate:}\)
\[
\mathrm{CH_3NH_2+CH_3COCl\longrightarrow CH_3CONHCH_3+HCl}
\]
The intermediate P is N-methylethanamide.
The original methyl group remains bonded to nitrogen.
\(\textbf{Reduction of the amide carbonyl:}\)
Lithium aluminium hydride converts the amide carbonyl carbon into a methylene carbon.
\[
\mathrm{CH_3CONHCH_3\xrightarrow[\text{work-up}]{LiAlH_4}CH_3CH_2NHCH_3}
\]
The product Q is N-methylethanamine.
Its nitrogen is attached to one methyl group, one ethyl group and one hydrogen atom.
Therefore, Q is a secondary amine.
\(\textbf{Reaction with nitrous acid:}\)
Secondary amines can undergo N-nitrosation under suitable conditions.
They do not undergo the normal primary-aliphatic-amine reaction that quantitatively releases nitrogen gas and forms an alcohol.
Thus, the conversion through an amide has changed the diagnostic nitrous-acid behaviour of the starting nitrogen centre.
The acetyl carbonyl carbon becomes part of a permanent ethyl group rather than being removed.
The correct answer requires tracking the introduced carbon framework, identifying the final amine class and applying the reaction characteristic of that class.
It cannot be obtained merely from the initial primary-amine classification.
212. A diprotic nitrogen-containing base B possesses two protonatable nitrogen centres.
For this question, the successive conjugate-acid pKa values are supplied as:
\[
\mathrm{p}K_{a1}=6.0,\qquad \mathrm{p}K_{a2}=10.0
\]
where the dominant equilibria are:
\[
\mathrm{BH_2^{2+}\rightleftharpoons BH^++H^+}
\]
\[
\mathrm{BH^+\rightleftharpoons B+H^+}
\]
A buffered solution is maintained at pH 8.0.
Assume ideal equilibrium behaviour.
Which nitrogen-containing form predominates?
ⓐ. \(\mathrm{BH_2^{2+}}\), because the solution is acidic relative to pH 14
ⓑ. Equal amounts of all three forms, because two ionisation equilibria are present
ⓒ. \(\mathrm{B}\), because pH 8.0 is above neutral pH
ⓓ. \(\mathrm{BH^+}\), because pH 8.0 lies between the two successive pKa values
Correct Answer: \(\mathrm{BH^+}\), because pH 8.0 lies between the two successive pKa values
Explanation: The molecule contains two protonatable nitrogen centres and therefore can exist in three principal protonation states.
The fully protonated form carries a charge of \(+2\).
The intermediate form carries a charge of \(+1\).
The unprotonated form is neutral.
The relative abundances depend on pH and the supplied successive pKa values.
\(\textbf{First deprotonation equilibrium:}\)
\[
\mathrm{BH_2^{2+}\rightleftharpoons BH^++H^+}
\]
At pH 8.0:
\[
\frac{[\mathrm{BH^+}]}{[\mathrm{BH_2^{2+}}]}=10^{8.0-6.0}
\]
\[
=100
\]
Thus, the singly protonated form is strongly favoured over the doubly protonated form.
\(\textbf{Second deprotonation equilibrium:}\)
\[
\mathrm{BH^+\rightleftharpoons B+H^+}
\]
At the same pH:
\[
\frac{[\mathrm{B}]}{[\mathrm{BH^+}]}=10^{8.0-10.0}
\]
\[
=0.01
\]
The singly protonated form is also strongly favoured over the neutral form.
Therefore, \(\mathrm{BH^+}\) predominates at pH 8.0.
A solution's pH being above 7 does not necessarily imply that every amino nitrogen is unprotonated.
Each protonation equilibrium must be compared with its own pKa.
The result demonstrates why compounds containing multiple amino centres can have stable intermediate protonation states.
213. A student proposes three chemical methods for distinguishing aniline from phenol in separate pure samples.
Method P: Treatment with dilute aqueous hydrochloric acid followed by testing for formation of an aqueous ionic salt.
Method Q: Treatment with aqueous sodium hydroxide followed by testing for formation of an aqueous ionic salt.
Method R: Treatment with chloroform and ethanolic potassium hydroxide on heating.
Which conclusion correctly compares their distinguishing principles?
ⓐ. P relies on aniline's basicity, Q relies on phenol's acidity, and R relies on aniline's primary-amine character.
ⓑ. P relies on phenol's basicity, Q relies on aniline's acidity, and R relies on phenol's primary-amine character.
ⓒ. All three methods distinguish the compounds exclusively through electrophilic aromatic substitution.
ⓓ. P and Q are ineffective because aniline and phenol contain the same number of aromatic carbon atoms.
Correct Answer: P relies on aniline's basicity, Q relies on phenol's acidity, and R relies on aniline's primary-amine character.
Explanation: Aniline and phenol both contain benzene rings, but their directly attached functional groups differ.
Aniline possesses a primary aromatic amino group.
Its nitrogen lone pair allows it to accept a proton from a suitable acid.
Treatment with dilute hydrochloric acid therefore forms anilinium chloride.
This provides the distinguishing principle for Method P.
Phenol possesses an O–H bond whose proton is sufficiently acidic to be removed by aqueous sodium hydroxide.
The product is an ionic phenoxide salt.
This provides the distinguishing principle for Method Q.
Aniline does not behave as a phenolic acid under the same ordinary alkali treatment.
Method R relies on a different chemical property.
The carbylamine reaction is characteristic of primary amines.
Aniline gives a positive result with chloroform and ethanolic potassium hydroxide on heating.
Phenol has no amino nitrogen and cannot undergo this reaction.
The three methods therefore exploit basicity, acidity and functional-group-specific nitrogen chemistry, respectively.
The presence of a benzene ring in both compounds is not sufficient to predict equivalent reactivity.
Selecting a diagnostic method requires identifying the functional group responsible for the observation.
214. An unknown compound X has one nitrogen atom and the molecular formula \(\mathrm{C_3H_9N}\).
It does not undergo the ordinary carbylamine reaction.
Treatment with benzenesulphonyl chloride gives no corresponding neutral sulphonamide.
However, X reacts quantitatively with one mole of methyl iodide per mole of X to form an ammonium salt containing four nitrogen–carbon bonds.
Which structure is X?
ⓐ. \(\mathrm{CH_3CH_2CH_2NH_2}\)
ⓑ. \(\mathrm{CH_3CH_2NHCH_3}\)
ⓒ. \(\mathrm{(CH_3)_3N}\)
ⓓ. \(\mathrm{CH_3CH(NH_2)CH_3}\)
Correct Answer: \(\mathrm{(CH_3)_3N}\)
Explanation: All four options have the molecular formula \(\mathrm{C_3H_9N}\), so molecular formula alone is insufficient.
The carbylamine reaction is characteristic of primary amines.
Options A and D are primary amines and would ordinarily give positive carbylamine reactions.
They are therefore inconsistent with the observation.
Option B is N-methylethanamine, a secondary amine.
It gives a negative carbylamine reaction but contains one N–H bond.
Consequently, it can react with benzenesulphonyl chloride to form an N,N-disubstituted sulphonamide.
This contradicts the second observation.
Option C is trimethylamine, a tertiary amine.
Its nitrogen is bonded to three methyl groups and possesses no nitrogen-bound hydrogen atom.
It does not undergo ordinary neutral-sulphonamide formation with Hinsberg's reagent.
However, its neutral nitrogen possesses a lone pair.
Methyl iodide can introduce a fourth carbon-containing substituent onto nitrogen.
\[
\mathrm{(CH_3)_3N+CH_3I\longrightarrow[(CH_3)_4N]^+I^-}
\]
The resulting tetramethylammonium ion contains four nitrogen–carbon bonds.
Exactly one methyl iodide molecule is required for each trimethylamine molecule in this final quaternisation step.
The observations therefore establish tertiary-amine character and identify trimethylamine uniquely among the supplied structures.
The inference combines two negative N–H-dependent tests with a positive lone-pair-dependent alkylation reaction.
215. A neutral organic compound contains a primary aromatic amino group and a carboxylic acid group attached to the same benzene ring.
It is subjected separately to the following treatments:
P: Dilute aqueous hydrochloric acid.
Q: Aqueous sodium hydroxide.
R: Ethanoyl chloride in the presence of pyridine under conditions favouring N-acylation.
Which statement correctly identifies the functional-group changes?
ⓐ. P can protonate the amino group, Q can deprotonate the carboxyl group, and R can convert the primary amino group into an N-acyl derivative.
ⓑ. P must convert the carboxyl group into an ester, Q must convert the amino group into a diazonium group, and R must remove both nitrogen atoms.
ⓒ. P converts the aromatic amino group into a tertiary amine, Q removes the carboxyl carbon, and R gives an ordinary ammonium chloride.
ⓓ. P and Q can only affect the benzene ring, whereas R acts exclusively on the carboxylic acid proton.
Correct Answer: P can protonate the amino group, Q can deprotonate the carboxyl group, and R can convert the primary amino group into an N-acyl derivative.
Explanation: The molecule contains an amino group and a carboxylic acid group.
Both functional groups influence its chemical behaviour, but they respond differently to acids, bases and acylating reagents.
\(\textbf{Treatment P — Addition of hydrochloric acid:}\)
The aromatic amino nitrogen possesses a lone pair and can accept a proton.
The resulting nitrogen-containing group is ammonium-like and carries positive charge.
The aromatic carbon skeleton is retained.
\(\textbf{Treatment Q — Addition of sodium hydroxide:}\)
The carboxylic acid group can lose its acidic proton.
The resulting carboxylate salt is ionic and generally has increased affinity for aqueous solution.
This process does not require removal of the amino group or cleavage of the carboxyl carbon from the ring.
\(\textbf{Treatment R — N-Acylation:}\)
A primary aromatic amino group contains nitrogen-bound hydrogen atoms.
Under suitable conditions, ethanoyl chloride can replace one of these hydrogens with an acetyl group.
Pyridine removes the hydrogen chloride produced.
The nitrogen-containing product therefore contains an amide linkage.
The reactions differ because protonation, deprotonation and acyl substitution involve distinct functional-group requirements.
A compound containing both an acidic and a basic group cannot be treated as though it possesses only one kind of chemical reactivity.
The correct option identifies the expected role of each reagent without inventing changes to the benzene framework.
216. Three neutral nitrogen-containing compounds are represented by:
P: \(\mathrm{C_6H_5NH_2}\)
Q: \(\mathrm{C_6H_5NHCOCH_3}\)
R: \(\mathrm{C_6H_5N(CH_3)_2}\)
A chemist wishes to distinguish the consequences of three different interactions involving the nitrogen lone pair:
(i) direct nitrogen-to-ring conjugation;
(ii) competing nitrogen-to-carbonyl conjugation;
(iii) protonation of an N–H-free aromatic tertiary amine.
Which matching is correct?
ⓐ. (i) Q, (ii) R, (iii) P
ⓑ. (i) R, (ii) P, (iii) Q
ⓒ. (i) P, (ii) Q, (iii) R
ⓓ. (i) P, (ii) R, (iii) Q
Correct Answer: (i) P, (ii) Q, (iii) R
Explanation: The three compounds differ in the substituents attached directly to their aromatic amino nitrogens.
Compound P is aniline, a primary aromatic amine.
Its nitrogen lone pair can delocalise into the benzene ring.
This interaction is an important cause of its activating influence toward aromatic electrophilic substitution.
Therefore, P is the intended example of direct nitrogen-to-ring conjugation.
Compound Q is acetanilide, an aromatic amide.
Its nitrogen is bonded to a carbonyl carbon.
The carbonyl group competes with the aromatic ring for resonance interaction with the nitrogen lone pair.
Consequently, the amino-derived substituent has a moderated activating influence compared with the free amino group.
Therefore, Q illustrates nitrogen-to-carbonyl conjugation.
Compound R is N,N-dimethylaniline, a tertiary aromatic amine.
Its nitrogen is bonded to one phenyl group and two methyl groups.
It contains no N–H bond but retains an available lone pair in its neutral form.
This lone pair can accept a proton from a suitable acid.
Therefore, R illustrates protonation of an N–H-free tertiary aromatic amine.
The three phenomena are not mutually interchangeable even though they all involve electron density associated with nitrogen.
The complete matching must distinguish resonance destination, carbonyl bonding and the structural requirement for protonation.
217. Two primary amines P and Q have the same molecular formula, \(\mathrm{C_4H_{11}N}\).
P is butan-1-amine, while Q is 2-methylpropan-2-amine.
A student argues that Q must be a tertiary amine because its amino group is attached to a tertiary carbon atom.
Consider the following statements.
Statement I: Both P and Q are primary amines because their nitrogen atoms each have only one carbon-containing substituent.
Statement II: The carbon atom attached to nitrogen in Q is tertiary.
Statement III: Q cannot give a carbylamine reaction because its amino-bearing carbon is tertiary.
Statement IV: The different degrees of the amino-bearing carbons do not change the primary classification of their nitrogen atoms.
Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, II and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and IV only
Explanation: Amine classification depends on the number of carbon-containing groups directly attached to nitrogen.
The degree of the carbon atom carrying the amino group is a separate structural property.
Butan-1-amine contains a primary amino group attached to a terminal carbon.
Its nitrogen is bonded to one carbon atom and two hydrogen atoms.
2-Methylpropan-2-amine contains a primary amino group attached to a tertiary carbon atom.
Its nitrogen is likewise bonded to one carbon atom and two hydrogen atoms.
Statement I is therefore correct.
Statement II is correct because the carbon atom carrying the amino group in Q is bonded to three methyl carbon atoms.
It is a tertiary carbon.
Statement III is incorrect because the carbylamine reaction depends on primary-amine character, not on the degree of the amino-bearing carbon.
Q possesses a primary amino group and can undergo the characteristic reaction under suitable conditions.
Statement IV is correct because changing the carbon environment does not automatically change the number of carbon substituents attached to nitrogen.
Both compounds belong to the same amine class despite their different carbon frameworks.
The misconception arises from applying the primary–secondary–tertiary terminology to the wrong atom.
The nitrogen substitution degree and the carbon substitution degree must be identified independently.
218. An organic mixture contains a neutral tertiary amine P and a quaternary ammonium chloride Q.
P has the structure \(\mathrm{(CH_3)_3N}\), whereas Q has the formula \(\mathrm{[(CH_3)_4N]^+Cl^-}\).
Each is treated separately with sufficient aqueous sodium hydroxide at room temperature under ordinary acid–base conditions.
Which statement correctly distinguishes the expected nitrogen-containing species?
ⓐ. Both give trimethylamine because hydroxide removes one methyl group from every positively charged nitrogen centre.
ⓑ. P becomes tetramethylammonium hydroxide, whereas Q becomes trimethylamine.
ⓒ. P remains the neutral tertiary amine, while Q does not undergo simple N–H deprotonation because it has no nitrogen-bound hydrogen.
ⓓ. Both give methylamine because sodium hydroxide converts tertiary and quaternary nitrogen centres into primary amines.
Correct Answer: P remains the neutral tertiary amine, while Q does not undergo simple N–H deprotonation because it has no nitrogen-bound hydrogen.
Explanation: Trimethylamine is a neutral tertiary amine containing three methyl groups and one nitrogen lone pair.
It possesses no N–H bond in its original neutral form.
Under ordinary aqueous acid–base conditions, sodium hydroxide does not introduce an additional methyl group onto nitrogen.
Therefore, treatment of neutral trimethylamine with sodium hydroxide does not convert it into a quaternary ammonium salt.
Tetramethylammonium chloride is already a quaternary ammonium salt.
Its nitrogen atom has four nitrogen–carbon sigma bonds and carries a positive charge.
It contains no nitrogen-bound hydrogen atom.
Consequently, hydroxide cannot regenerate trimethylamine merely by removing an N–H proton.
The behaviour differs from a protonated tertiary amine such as trimethylammonium chloride.
That compound contains an N–H bond and can liberate neutral trimethylamine on alkaline treatment.
The distinction is between positive charge produced by protonation and positive charge associated with a fourth organic substituent.
Ordinary deprotonation cannot cleave a nitrogen–carbon bond.
Therefore, the original tertiary amine and the quaternary ammonium salt remain distinct nitrogen-containing species under the specified acid–base conditions.
The comparison highlights why molecular charge alone is insufficient to predict regeneration of a free amine.
219. An unknown neutral nitrogen-containing compound X possesses one nitrogen atom and has molecular formula \(\mathrm{C_4H_{11}N}\).
Its observations are:
(i) It gives a negative carbylamine reaction.
(ii) It reacts with benzenesulphonyl chloride to produce a neutral sulphonamide insoluble in aqueous sodium hydroxide.
(iii) Its nitrogen is attached to two identical alkyl groups.
Which compound satisfies all the observations?
ⓐ. Butan-2-amine
ⓑ. N-Methylpropan-2-amine
ⓒ. N,N-Dimethylethanamine
ⓓ. N-Ethylethanamine
Correct Answer: N-Ethylethanamine
Explanation: The molecular formula admits several primary, secondary and tertiary amine constitutional isomers.
The first observation excludes compounds that undergo the characteristic primary-amine carbylamine reaction.
Butan-2-amine is a primary amine because its nitrogen is bonded to only one carbon-containing group.
Therefore, option A is inconsistent with the negative carbylamine result.
The second observation establishes that the amine reacts with benzenesulphonyl chloride.
An ordinary neutral sulphonamide insoluble in alkali is characteristic of a secondary-amine-derived Hinsberg product.
Secondary amines possess one N–H bond before sulphonylation.
After formation of the N,N-disubstituted sulphonamide, no acidic N–H bond remains.
N,N-Dimethylethanamine is tertiary and cannot undergo the corresponding ordinary sulphonamide-forming reaction.
Therefore, option C is excluded.
N-Methylpropan-2-amine is secondary and could satisfy the first two observations.
However, its nitrogen-bound groups are methyl and propan-2-yl, which are different.
It is therefore a mixed secondary amine.
N-Ethylethanamine contains two identical ethyl groups attached to nitrogen.
It is a simple secondary amine and has one nitrogen-bound hydrogen before sulphonylation.
Its Hinsberg product lacks an N–H bond and is insoluble in alkali under the stated conditions.
Thus, only N-ethylethanamine satisfies the molecular formula, both chemical observations and the identical-alkyl-group requirement.
The correct identification combines functional testing with direct reconstruction of nitrogen substitution rather than relying on a single negative reaction.
220. Three compounds have the same molecular formula, \(\mathrm{C_8H_{11}N}\):
P: \(\mathrm{C_6H_5CH_2CH_2NH_2}\)
Q: \(\mathrm{C_6H_5CH_2NHCH_3}\)
R: \(\mathrm{C_6H_5NHCH_2CH_3}\)
Each is subjected separately to the carbylamine test and to treatment with nitrous acid under conditions appropriate for its amine class.
Which statement correctly compares their structures and characteristic reactions?
ⓐ. P and Q are primary aliphatic amines, while R is a secondary aromatic amine.
ⓑ. All three give stable arenediazonium salts at 273–278 K because their molecular structures contain benzene rings.
ⓒ. Only R gives a positive carbylamine reaction because its nitrogen is attached directly to the aromatic ring.
ⓓ. P is a primary aralkyl amine capable of nitrogen evolution with nitrous acid; Q and R are secondary amines capable of N-nitrosation under suitable conditions.
Correct Answer: P is a primary aralkyl amine capable of nitrogen evolution with nitrous acid; Q and R are secondary amines capable of N-nitrosation under suitable conditions.
Explanation: The three compounds have identical molecular formulas but different nitrogen–carbon connectivities.
Their classification must be determined by examining the groups bonded directly to nitrogen.
\(\textbf{Compound P — Primary amino group:}\)
In P, nitrogen is attached to one 2-phenylethyl group and possesses two N–H bonds.
Therefore, P is a primary amine.
Its nitrogen is separated from the benzene ring by two saturated carbon atoms, so it behaves as an aliphatic primary amino group in the standard nitrous-acid reaction.
It can undergo the carbylamine reaction and, under the specified nitrous-acid conditions, produce nitrogen gas through decomposition of an unstable aliphatic diazonium intermediate.
\(\textbf{Compound Q — Secondary benzylic amine:}\)
In Q, nitrogen is bonded to a benzyl group and a methyl group.
It possesses one N–H bond and is secondary.
Its lone pair is not directly conjugated with the aromatic ring because of the intervening methylene carbon.
\(\textbf{Compound R — Secondary aromatic amine:}\)
In R, nitrogen is directly bonded to a phenyl group and an ethyl group.
It is also secondary, but its nitrogen lone pair can interact directly with the aromatic ring.
Both Q and R give negative ordinary carbylamine tests.
Under suitable nitrosation conditions, secondary amines can form N-nitroso derivatives rather than undergoing the characteristic primary-aliphatic-amine nitrogen-evolution reaction.
The benzene ring in P or Q does not make its nitrogen directly aromatic.
The correct answer therefore requires distinguishing amine degree from direct aromatic conjugation and applying the relevant diagnostic reactions.
221. The four primary amines having molecular formula \(\mathrm{C_4H_{11}N}\) are considered:
P: Butan-1-amine
Q: Butan-2-amine
R: 2-Methylpropan-1-amine
S: 2-Methylpropan-2-amine
Which statement correctly identifies the compound that contains a stereogenic carbon atom and explains its compatibility with the carbylamine test?
ⓐ. Q alone contains a stereogenic carbon, and it can give a positive carbylamine reaction because its nitrogen is primary.
ⓑ. P and Q both contain stereogenic carbons because their nitrogen atoms are bonded to unbranched carbon chains.
ⓒ. S alone contains a stereogenic carbon, but it cannot give a carbylamine reaction because its amino-bearing carbon is tertiary.
ⓓ. R and S both contain stereogenic carbons, and only R can give a positive carbylamine reaction.
Correct Answer: Q alone contains a stereogenic carbon, and it can give a positive carbylamine reaction because its nitrogen is primary.
Explanation: All four compounds are primary amines because each nitrogen atom is bonded to one carbon-containing group and two hydrogen atoms.
However, the carbon frameworks differ in their substitution patterns.
A stereogenic tetrahedral carbon must be bonded to four different groups.
Butan-1-amine has the structure \(\mathrm{CH_3CH_2CH_2CH_2NH_2}\).
None of its carbon atoms has four different substituents.
Butan-2-amine has the structure \(\mathrm{CH_3CH(NH_2)CH_2CH_3}\).
Its carbon 2 is bonded to \(\mathrm{H}\), \(\mathrm{NH_2}\), \(\mathrm{CH_3}\) and \(\mathrm{CH_2CH_3}\).
These four groups are different, making carbon 2 stereogenic.
2-Methylpropan-1-amine contains a carbon bonded to two identical methyl groups and therefore lacks a stereogenic carbon.
2-Methylpropan-2-amine has an amino-bearing carbon bonded to three identical methyl groups.
It also lacks a stereogenic carbon.
All four compounds retain primary-amine character regardless of whether their amino-bearing carbon is primary, secondary or tertiary.
Consequently, all four are structurally eligible for the ordinary carbylamine reaction.
The presence of a stereogenic carbon in Q does not prevent its primary amino group from reacting.
The important distinction is between stereogenicity at carbon and substitution degree at nitrogen.
222. Three aromatic primary amines are compared:
P: Aniline
Q: 3-Methoxyaniline
R: 4-Methoxyaniline
The methoxy group can withdraw electron density inductively while donating electron density through resonance when an appropriate conjugative pathway exists.
Which statement is most consistent with these electronic effects under ordinary comparable aqueous conditions?
ⓐ. Q and R must have identical basic strengths because both contain the same methoxy substituent.
ⓑ. Q must be more basic than R because the meta position allows stronger direct resonance donation from methoxy toward the amino group.
ⓒ. R can be more basic than P through para resonance donation, whereas Q does not receive the same direct para-resonance benefit and can be weaker than P.
ⓓ. Both Q and R must be more basic than P because the inductive effect of oxygen is always electron releasing.
Correct Answer: R can be more basic than P through para resonance donation, whereas Q does not receive the same direct para-resonance benefit and can be weaker than P.
Explanation: The three compounds contain the same primary aromatic amino group.
Their relative basic strengths depend on how substituents alter the electronic environment of the amino nitrogen.
In aniline, the nitrogen lone pair is partly delocalised into the benzene ring.
The methoxy group introduces two competing electronic influences.
Its oxygen atom withdraws electron density through a negative inductive effect.
However, an oxygen lone pair can also donate electron density into the aromatic system through resonance.
\(\textbf{Para-methoxy substitution:}\)
In 4-methoxyaniline, resonance donation from methoxy can influence the aromatic positions involved in conjugation with the amino substituent.
The electron-releasing resonance contribution can increase the basic strength relative to aniline.
\(\textbf{Meta-methoxy substitution:}\)
In 3-methoxyaniline, the methoxy group does not provide the same direct para-type resonance relationship with the amino substituent.
Its electron-withdrawing inductive influence remains relevant.
Consequently, the meta derivative need not show the same basicity increase as the para derivative and can be weaker than aniline.
The correct comparison therefore requires considering both the electronic identity and the position of the substituent.
Simply recognising that methoxy is an ortho/para-directing group in electrophilic substitution is insufficient to determine every aromatic basicity comparison.
The distinction illustrates how one functional group can exhibit competing inductive and resonance effects whose relative importance depends on molecular connectivity.
223. Two aqueous solutions are prepared at the same temperature.
Solution P contains anilinium chloride, whose conjugate acid has \(\mathrm{p}K_a=4.62\).
Solution Q contains ethanamine, whose conjugate acid, ethanaminium ion, has \(\mathrm{p}K_a=10.71\).
The solutions are mixed so that the following proton-transfer equilibrium can occur:
\[
\mathrm{C_6H_5NH_3^++C_2H_5NH_2\rightleftharpoons C_6H_5NH_2+C_2H_5NH_3^+}
\]
Given \(10^{0.09}\approx1.23\), what is the approximate equilibrium constant for the reaction as written?
ⓐ. \(8.1\times10^{-7}\)
ⓑ. \(1.23\times10^{-6}\)
ⓒ. \(8.1\times10^5\)
ⓓ. \(1.23\times10^6\)
Correct Answer: \(1.23\times10^6\)
Explanation: The reaction transfers a proton from the anilinium ion to ethanamine.
The direction of proton transfer depends on the relative strengths of the two conjugate acids.
A larger pKa corresponds to a weaker acid.
Anilinium ion has the smaller pKa and is therefore the stronger acid.
Ethanamine is the stronger base because its conjugate acid has the larger pKa.
\(\textbf{Relate the equilibrium constant to acid strengths:}\)
For a proton-transfer reaction:
\[
\mathrm{HA+B\rightleftharpoons A^-+BH^+}
\]
the equilibrium constant can be written as:
\[
K=\frac{K_a(\mathrm{HA})}{K_a(\mathrm{BH^+})}
\]
Using:
\[
K_a=10^{-\mathrm{p}K_a}
\]
gives:
\[
K=\frac{10^{-4.62}}{10^{-10.71}}
\]
\(\textbf{Simplify the logarithmic expression:}\)
\[
K=10^{-4.62+10.71}
\]
\[
K=10^{6.09}
\]
\[
K=10^6\times10^{0.09}
\]
\[
K\approx10^6\times1.23
\]
\[
K\approx1.23\times10^6
\]
\(\textbf{Chemical interpretation:}\)
The equilibrium strongly favours formation of neutral aniline and ethanaminium ion.
This is consistent with proton transfer from the stronger conjugate acid to the stronger base.
The large equilibrium constant does not mean that aniline is incapable of accepting a proton.
It means that ethanamine is substantially more favourable as the proton acceptor in this competition.
The comparison combines relative aromatic basicity with quantitative acid–base equilibrium reasoning.
\(\textbf{Final answer:}\)
\[
\boxed{K\approx1.23\times10^6}
\]
224. The following nitrogen centres are described:
P: Nitrogen in neutral trimethylamine, \(\mathrm{(CH_3)_3N}\).
Q: Nitrogen in trimethylammonium ion, \(\mathrm{[(CH_3)_3NH]^+}\).
R: Nitrogen in N,N-dimethylethanamide, \(\mathrm{CH_3CON(CH_3)_2}\).
Which statement correctly compares the electron-pair arrangements and structural consequences?
ⓐ. P and Q both contain one free nitrogen lone pair, while R contains no nitrogen–carbon bond.
ⓑ. P is pyramidal with a lone pair; Q has four sigma bonds around nitrogen; R has an amide nitrogen whose bonding is influenced by carbonyl conjugation.
ⓒ. P is trigonal planar because it has three methyl groups, while Q and R are both ordinary pyramidal tertiary amines.
ⓓ. All three have identical nitrogen geometry because nitrogen is bonded to three carbon atoms in every structure.
Correct Answer: P is pyramidal with a lone pair; Q has four sigma bonds around nitrogen; R has an amide nitrogen whose bonding is influenced by carbonyl conjugation.
Explanation: The three nitrogen centres differ because of protonation or attachment to a carbonyl group.
P is neutral trimethylamine.
Its nitrogen forms three N–C sigma bonds and contains one lone pair.
The molecular geometry is approximately trigonal pyramidal.
The lone pair contributes to repulsion among the electron-pair regions around nitrogen.
Q is produced when trimethylamine accepts a proton.
Its nitrogen forms three N–C bonds and one N–H bond.
The original lone pair is now involved in the additional sigma bond.
The four bonded groups adopt an approximately tetrahedral arrangement.
R is an amide rather than an ordinary tertiary amine.
Its nitrogen is directly attached to a carbonyl carbon and two methyl groups.
The nitrogen lone pair can overlap with the carbonyl pi-electron system.
This interaction gives the amide C–N bond partial double-bond character and favours an approximately planar amide arrangement.
Therefore, R should not be described using the ordinary pyramidal-amine model without considering resonance.
The distinction is important because nitrogen basicity and nucleophilicity depend on lone-pair availability.
P can readily display ordinary tertiary-amine basicity, whereas the nitrogen lone pair of R is substantially involved in amide resonance.
The correct structural interpretation must consider bonding environment rather than merely counting nitrogen–carbon attachments.
225. Two compounds are represented by the following systematic names:
P: N-Ethyl-3-methylbutan-2-amine
Q: N,N-Dimethylpentan-2-amine
Which statement correctly compares their molecular formulas and nitrogen substitution degrees?
ⓐ. P contains seven carbon atoms and Q contains six, while both are secondary.
ⓑ. P and Q both have molecular formula \(\mathrm{C_6H_{15}N}\), but P is primary and Q is secondary.
ⓒ. P contains six carbon atoms and Q contains seven, while both are tertiary.
ⓓ. P and Q both have molecular formula \(\mathrm{C_7H_{17}N}\), but P is secondary and Q is tertiary.
Correct Answer: P and Q both have molecular formula \(\mathrm{C_7H_{17}N}\), but P is secondary and Q is tertiary.
Explanation: The names contain two different types of substituent locants.
A numerical locant identifies a position on the parent carbon chain.
An N-locant identifies a substituent attached directly to nitrogen.
\(\textbf{Reconstruct compound P:}\)
The parent butan-2-amine contributes four carbon atoms.
A methyl group at carbon 3 adds one carbon atom.
An ethyl group attached to nitrogen adds two additional carbon atoms.
Therefore, P contains seven carbon atoms.
Its nitrogen is bonded to the carbon framework at carbon 2 and to an ethyl group.
One N–H bond remains, making it a secondary amine.
\(\textbf{Reconstruct compound Q:}\)
The parent pentan-2-amine contributes five carbon atoms.
Two N-methyl groups contribute two additional carbon atoms.
Therefore, Q also contains seven carbon atoms.
Its nitrogen is bonded to the parent carbon framework and to two methyl groups.
It has no N–H bond and is therefore tertiary.
\(\textbf{Molecular-formula check:}\)
Both structures are saturated acyclic monoamines containing seven carbon atoms.
For such compounds, the molecular formula is:
\[
\mathrm{C_7H_{17}N}
\]
Thus, P and Q are constitutional isomers belonging to different amine classes.
The names also show that the numerical carbon-chain locants do not determine the degree of the amine.
The decisive difference is the number of carbon-containing groups bonded directly to nitrogen.
Both molecular formula and nitrogen classification must be reconstructed independently.
226. A molecule contains two nitrogen atoms in the following groups:
P: \(\mathrm{-NHCOCH_3}\), attached directly to an aromatic carbon.
Q: \(\mathrm{-CH_2N(CH_3)_2}\), attached to the same aromatic ring through the methylene carbon.
A student proposes that treatment with dilute hydrochloric acid must protonate P preferentially because P contains an N–H bond while Q does not.
Which statement correctly evaluates the proposal?
ⓐ. It is correct because an N–H bond is required for proton acceptance.
ⓑ. It is correct because the carbonyl group increases the ordinary basicity of amide nitrogen.
ⓒ. It is incorrect: Q retains a basic tertiary-amine lone pair, whereas P is an amide with a resonance-delocalised nitrogen lone pair.
ⓓ. It is incorrect because neither nitrogen centre can be protonated under any conditions.
Correct Answer: It is incorrect: Q retains a basic tertiary-amine lone pair, whereas P is an amide with a resonance-delocalised nitrogen lone pair.
Explanation: The molecule contains two chemically different nitrogen environments.
The first nitrogen is part of an amide because it is directly bonded to a carbonyl carbon.
The second nitrogen is part of a tertiary amino group attached through a saturated methylene carbon.
Proton acceptance requires an available electron pair, not an N–H bond in the neutral starting compound.
The nitrogen of an ordinary tertiary amine possesses a lone pair despite having no N–H bond.
In Q, this lone pair can accept a proton from hydrochloric acid.
The amide nitrogen in P also possesses electron density, but its lone pair is extensively delocalised toward the adjacent carbonyl group.
Consequently, the amide nitrogen is much less basic than an ordinary aliphatic tertiary amino nitrogen.
Under the specified dilute-acid conditions, protonation of the tertiary amino centre is therefore preferred.
The N–H bond in the amide does not make it the stronger proton acceptor.
The carbonyl oxygen of an amide can participate in protonation under sufficiently acidic conditions, but that is a different question from ordinary nitrogen basicity.
The structural distinction also affects N-acylation: Q has no N–H bond, while P is already an amide.
The correct interpretation requires separating proton-accepting ability from the presence of nitrogen-bound hydrogen.
Different nitrogen centres within one molecule can respond differently to the same acid.
227. A colourless liquid X has molecular formula \(\mathrm{C_5H_{13}N}\) and is a saturated acyclic tertiary amine.
Its nitrogen is bonded to exactly one propan-1-yl group and two methyl groups.
A second liquid Y has the same molecular formula and is also a tertiary amine, but its nitrogen is bonded to one propan-2-yl group and two methyl groups.
Which statement correctly compares X and Y?
ⓐ. X and Y are identical because both have five carbon atoms and a tertiary amino group.
ⓑ. X is N,N-dimethylpropan-1-amine, whereas Y is N,N-dimethylpropan-2-amine.
ⓒ. X is a secondary amine, whereas Y is a tertiary amine.
ⓓ. X is N,N-dimethylpropan-2-amine, whereas Y is N,N-dimethylpropan-1-amine.
Correct Answer: X is N,N-dimethylpropan-1-amine, whereas Y is N,N-dimethylpropan-2-amine.
Explanation: A tertiary amine contains three carbon-containing groups attached directly to nitrogen and no nitrogen-bound hydrogen.
The molecular formula alone does not establish the identity or connectivity of those three groups.
For X, the nitrogen substituents are one propan-1-yl group and two methyl groups.
Its structure is:
\[
\mathrm{CH_3CH_2CH_2N(CH_3)_2}
\]
For Y, the propyl group is attached to nitrogen through its second carbon atom.
Its structure is:
\[
\mathrm{(CH_3)_2CHN(CH_3)_2}
\]
Each structure has \(3+1+1=5\) carbon atoms, consistent with \(\mathrm{C_5H_{13}N}\).
Both nitrogen atoms possess three N–C bonds and a lone pair, so both compounds are tertiary amines.
The distinguishing feature is the point of attachment of the three-carbon substituent.
X is therefore N,N-dimethylpropan-1-amine, while Y is N,N-dimethylpropan-2-amine.
The compounds are constitutional isomers rather than identical molecules.
They cannot be classified by whether the carbon attached to nitrogen is primary or secondary; amine class depends on the number of nitrogen-bound carbon groups.
The correct comparison is option B.
228. A solution containing equimolar amounts of aniline and ethanamine is treated with a carefully controlled quantity of a strong acid so that the solution remains within a pH region where aniline is predominantly neutral but ethanamine is predominantly protonated.
Given:
\[
\mathrm{p}K_a(\text{anilinium})=4.62
\]
\[
\mathrm{p}K_a(\text{ethanaminium})=10.71
\]
Which pH interval most naturally supports this condition?
ⓐ. pH between 1.0 and 3.0
ⓑ. pH between 5.5 and 9.5
ⓒ. pH between 12.0 and 14.0
ⓓ. pH between 9.5 and 12.0
Correct Answer: pH between 5.5 and 9.5
Explanation: The proportion of an amine present as its free base or conjugate acid depends on pH relative to the conjugate-acid pKa.
Aniline is a weak aromatic base whose conjugate acid has a pKa of 4.62.
Ethanamine is a stronger aliphatic base whose conjugate acid has a pKa of 10.71.
For any amine B:
\[
\frac{[\mathrm{B}]}{[\mathrm{BH^+}]}=10^{\mathrm{pH}-\mathrm{p}K_a}
\]
A pH appreciably greater than 4.62 favours neutral aniline.
A pH appreciably less than 10.71 favours protonated ethanamine.
Both requirements can be satisfied simultaneously when the solution pH lies comfortably between the two conjugate-acid pKa values.
The interval 5.5–9.5 is consistent with these conditions.
For example, at pH 7.0, aniline is predominantly unprotonated because the pH is more than two units above its conjugate-acid pKa.
At the same pH, ethanamine is predominantly protonated because the pH is several units below its conjugate-acid pKa.
A strongly acidic solution would protonate both amines extensively.
A strongly basic solution would favour the neutral forms of both.
Therefore, the intermediate pH region provides selective protonation based on their different basic strengths.
The result does not require the two amines to have different nitrogen-substitution degrees; both are primary.
The relevant difference is direct aromatic conjugation of the aniline lone pair.
229. A student claims that a tertiary amine must have an approximately tetrahedral molecular shape around nitrogen because the nitrogen atom is ordinarily described as \(sp^3\) hybridised.
Consider the following statements.
Statement I: In a neutral tertiary aliphatic amine, nitrogen has three sigma bonds and one lone pair.
Statement II: The arrangement of electron-pair regions around nitrogen is approximately tetrahedral, but the arrangement of the three bonded atoms is pyramidal.
Statement III: Protonation can replace the lone-pair region with an additional N–H bonding region.
Statement IV: The presence of four electron-pair regions requires four atoms to be bonded directly to nitrogen in every neutral amine.
Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, III and IV only
ⓒ. I, II and III only
ⓓ. II, III and IV only
Correct Answer: I, II and III only
Explanation: The student's claim confuses electron-pair geometry with molecular geometry.
In an ordinary neutral tertiary aliphatic amine, nitrogen forms three sigma bonds to carbon-containing groups.
It also possesses one nonbonding electron pair.
Statement I is therefore correct.
The four electron-pair regions are arranged approximately tetrahedrally according to the ordinary valence-shell electron-pair model.
However, molecular shape describes the positions of the bonded atoms rather than including the lone pair as though it were an atom.
With three bonded atoms and one lone pair, the shape around nitrogen is pyramidal.
Statement II is correct.
When the amine accepts a proton, the lone pair forms an additional N–H bond.
The resulting ammonium nitrogen has four bonded groups and no lone pair.
Statement III is therefore correct.
Statement IV is incorrect because four electron-pair regions do not necessarily mean four bonded atoms.
One of those regions can contain a lone pair.
This distinction also explains why the C–N–C angle in trimethylamine is approximately \(108^\circ\), slightly different from the ideal tetrahedral angle.
The lone pair produces repulsion that influences the arrangement of the bonded groups.
Thus, hybridisation, electron-pair arrangement and molecular shape should not be treated as interchangeable descriptions.
230. The following two neutral compounds are structural isomers:
P: \(\mathrm{C_6H_5NHCH_2CH_3}\)
Q: \(\mathrm{C_6H_5CH_2NHCH_3}\)
They are subjected separately to controlled N-acetylation, followed by complete reduction of the resulting amides using \(\mathrm{LiAlH_4}\).
Which statement correctly predicts the connectivity of the final nitrogen-containing products?
ⓐ. Both routes give the same tertiary amine because the starting compounds have the same molecular formula.
ⓑ. P gives \(\mathrm{C_6H_5N(C_2H_5)_2}\), while Q gives \(\mathrm{C_6H_5CH_2N(CH_3)(C_2H_5)}\).
ⓒ. P gives \(\mathrm{C_6H_5CH_2N(C_2H_5)_2}\), while Q gives \(\mathrm{C_6H_5N(CH_3)(C_2H_5)}\).
ⓓ. Both routes regenerate their original secondary amines because amide reduction removes the acetyl group.
Correct Answer: P gives \(\mathrm{C_6H_5N(C_2H_5)_2}\), while Q gives \(\mathrm{C_6H_5CH_2N(CH_3)(C_2H_5)}\).
Explanation: P and Q have the same molecular formula but different nitrogen attachment to the aromatic framework.
P is N-ethylaniline, with nitrogen bonded directly to a phenyl group.
Q is N-methylbenzylamine, with nitrogen bonded to a benzylic methylene carbon.
Both compounds are secondary amines and possess one N–H bond.
\(\textbf{Acetylation of P:}\)
\[
\mathrm{C_6H_5NHCH_2CH_3\xrightarrow{CH_3COCl}C_6H_5N(COCH_3)CH_2CH_3}
\]
Lithium aluminium hydride subsequently reduces the acetyl carbonyl to a methylene group.
\[
\mathrm{C_6H_5N(COCH_3)CH_2CH_3\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5N(C_2H_5)_2}
\]
The final product is N,N-diethylaniline.
\(\textbf{Acetylation of Q:}\)
\[
\mathrm{C_6H_5CH_2NHCH_3\xrightarrow{CH_3COCl}C_6H_5CH_2N(CH_3)COCH_3}
\]
Reduction again converts the introduced acetyl group into an ethyl substituent.
\[
\mathrm{C_6H_5CH_2N(CH_3)COCH_3\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5CH_2N(CH_3)(C_2H_5)}
\]
The final product is a tertiary benzylamine derivative.
Neither transformation removes the original nitrogen-bound organic groups.
The two products remain distinct because the starting nitrogen–aryl and nitrogen–benzyl connectivities are preserved.
Identical molecular formulas and identical reagent sequences therefore do not guarantee identical products.
The decisive reasoning is to preserve the original nitrogen attachments while converting only the newly introduced acyl group into an alkyl group.
231. A sample of aniline is subjected separately to the following electronic modifications:
P: Protonation to form anilinium ion.
Q: Acetylation to form acetanilide.
R: Conversion of the amino group into N,N-dimethylamino functionality without quaternisation.
Which statement correctly identifies the nitrogen lone-pair situation relevant to aromatic substitution?
ⓐ. P and Q retain identical strong nitrogen lone-pair donation into the ring, while R lacks a lone pair.
ⓑ. Q becomes a quaternary ammonium compound, while P and R remain primary aromatic amines.
ⓒ. P and R both lack a nitrogen lone pair because both contain more than two nitrogen sigma bonds.
ⓓ. P has no free N lone pair; Q has a lone pair delocalised toward carbonyl; R retains a lone pair that can donate into the ring.
Correct Answer: P has no free N lone pair; Q has a lone pair delocalised toward carbonyl; R retains a lone pair that can donate into the ring.
Explanation: All three modifications begin with the primary aromatic amino group of aniline.
However, they alter its electronic behaviour in different ways.
\(\textbf{Modification P — Protonation:}\)
Aniline accepts a proton through its nitrogen lone pair.
The resulting anilinium ion contains an additional N–H bond and has no available nitrogen lone pair for the original resonance donation into the aromatic ring.
The positively charged substituent is deactivating and meta directing.
\(\textbf{Modification Q — Acetylation:}\)
Acetylation introduces the group \(\mathrm{-COCH_3}\) onto nitrogen.
The resulting acetamido nitrogen participates in resonance with the adjacent carbonyl group.
This reduces the electron density donated from nitrogen into the aromatic ring.
However, the acetamido group still has an ortho/para-directing influence under suitable electrophilic substitution conditions.
\(\textbf{Modification R — N-Methylation without quaternisation:}\)
The neutral N,N-dimethylamino group contains a nitrogen lone pair.
That lone pair can interact with the aromatic pi-electron system.
Consequently, the substituent can remain activating and ortho/para directing.
The important difference is that protonation removes the free lone pair, acetylation competes for it through carbonyl resonance, and neutral N-methylation retains its availability.
These changes should not be confused with quaternisation, which would introduce a fourth carbon-containing substituent and remove the neutral nitrogen lone pair.
The correct answer therefore distinguishes three different electronic consequences of modifying the same starting amino group.
232. Piperazine contains two secondary amino nitrogen atoms in a saturated six-membered ring.
Morpholine contains one secondary amino nitrogen and one oxygen atom in a saturated six-membered ring.
Both compounds are treated separately with excess benzoyl chloride in the presence of pyridine under conditions allowing complete ordinary N-benzoylation.
Which statement correctly compares the maximum number of benzoyl groups introduced per molecule?
ⓐ. Piperazine can introduce two benzoyl groups, whereas morpholine can introduce one.
ⓑ. Piperazine can introduce one benzoyl group, whereas morpholine can introduce two.
ⓒ. Both can introduce two benzoyl groups because each ring contains two heteroatoms.
ⓓ. Neither can introduce a benzoyl group because cyclic secondary amines lack N–H bonds.
Correct Answer: Piperazine can introduce two benzoyl groups, whereas morpholine can introduce one.
Explanation: The maximum number of ordinary N-benzoylation events depends on the number of suitable N–H-containing amino sites.
Piperazine contains two secondary amino nitrogen atoms.
Each nitrogen is bonded to two carbon atoms within the ring and has one N–H bond.
Therefore, each nitrogen can undergo ordinary benzoylation with benzoyl chloride.
Under the stipulated complete reaction conditions, two benzoyl groups can be introduced into one piperazine molecule.
Morpholine contains one secondary amino nitrogen and one ether oxygen atom.
Its nitrogen possesses one N–H bond and can undergo ordinary N-benzoylation.
However, the ring oxygen is not an additional amino nitrogen.
It does not provide a second N–H site for the specified reaction.
Therefore, morpholine can introduce one benzoyl group through ordinary N-acylation.
The presence of two heteroatoms in a ring does not imply the presence of two equivalent amino groups.
Both molecules are cyclic secondary-amine systems at their nitrogen centres, but the number of nitrogen atoms differs.
The reaction therefore distinguishes heteroatom count from the number of available N-acylation sites.
The comparison also demonstrates that a molecule can contain multiple independently reactive amino groups without each nitrogen becoming tertiary by merely belonging to a ring.
233. Three aromatic amino compounds have the following structures:
P: \(\mathrm{4\!-\!CH_3C_6H_4NH_2}\)
Q: \(\mathrm{4\!-\!NO_2C_6H_4NH_2}\)
R: \(\mathrm{4\!-\!CH_3C_6H_4NHCOCH_3}\)
A student compares the electronic influences of their ring substituents and nitrogen functionalities.
Which statement is correct?
ⓐ. P and Q contain identical electron-releasing para substituents, while R contains a free primary amino group.
ⓑ. Q is expected to be more basic than P because the para nitro group strongly withdraws electron density.
ⓒ. P is a para-methyl-substituted primary aromatic amine, Q a para-nitro-substituted primary aromatic amine, and R an N-acylated derivative.
ⓓ. R is an ordinary tertiary aromatic amine because its nitrogen is bonded to an aromatic group and an acetyl group.
Correct Answer: P is a para-methyl-substituted primary aromatic amine, Q a para-nitro-substituted primary aromatic amine, and R an N-acylated derivative.
Explanation: P and Q both contain a free primary aromatic amino group directly attached to a benzene ring.
Their differences arise from the electronic properties of the para substituent.
In P, the methyl group is generally electron releasing through its positive inductive influence.
This tends to favour the basic strength of the amino group relative to a corresponding electron-withdrawing substituent.
In Q, the nitro group is strongly electron withdrawing through inductive and resonance effects.
This reduces electron density associated with the aromatic amino system and weakens its basic character.
Thus, the methyl and nitro groups do not exert identical electronic influences.
R differs in the nitrogen-containing functional group itself.
Its nitrogen is attached to an aromatic carbon and to an acetyl carbonyl group.
The resulting functionality is an amide, not a free primary aromatic amine.
The amide nitrogen lone pair participates in resonance with the carbonyl group.
Consequently, R cannot be classified as an ordinary tertiary amine merely because nitrogen is bonded to more than one non-hydrogen atom.
P and Q can undergo reactions requiring a free primary amino group, subject to the relevant conditions.
R has already undergone N-acylation and does not retain the same primary-amine reactivity.
The correct interpretation therefore separates the influence of substituents on the benzene ring from changes in the functional-group identity of nitrogen.
234. A mixture contains two different amines, P and Q, with the following structures:
P: \(\mathrm{C_6H_5NH_2}\)
Q: \(\mathrm{C_6H_5CH_2N(CH_3)_2}\)
A sample is treated with excess hydrochloric acid and then with sufficient aqueous sodium hydroxide to regenerate the neutral compounds.
A second sample undergoes the carbylamine reaction.
A third sample undergoes ordinary N-acetylation with ethanoyl chloride and pyridine.
Which statement correctly combines the three observations?
ⓐ. Both form salts with HCl; only P gives a carbylamine test and ordinary neutral N-acetylation.
ⓑ. Only P forms an ammonium salt, while both compounds give positive carbylamine reactions.
ⓒ. Both compounds give positive carbylamine reactions, but only Q undergoes N-acetylation.
ⓓ. Q cannot form an ammonium salt because its nitrogen has no N–H bond, while P cannot undergo N-acetylation because it is aromatic.
Correct Answer: Both form salts with HCl; only P gives a carbylamine test and ordinary neutral N-acetylation.
Explanation: The two compounds contain nitrogen atoms with different substitution degrees and different connections to the aromatic ring.
P is aniline, a primary aromatic amine.
Its nitrogen is directly bonded to the benzene ring and possesses two N–H bonds.
Q is N,N-dimethylbenzylamine, a tertiary amine.
Its nitrogen is bonded to a benzyl group and two methyl groups, with no N–H bond.
Both neutral compounds possess a nitrogen lone pair and can accept a proton from hydrochloric acid.
Therefore, both can form corresponding ammonium salts.
Sufficient aqueous sodium hydroxide can regenerate the neutral amines by deprotonation.
The carbylamine reaction requires primary-amine character.
P gives a positive result because its nitrogen is primary.
Q gives a negative result because it is tertiary.
Ordinary N-acetylation with ethanoyl chloride requires a replaceable nitrogen-bound hydrogen atom.
P contains such hydrogens and can form acetanilide.
Q contains no N–H bond and cannot form the corresponding ordinary neutral amide through N–H replacement.
The three reactions therefore test different nitrogen properties: lone-pair availability, primary-amine classification and N–H-dependent acylation.
The correct answer requires considering all three rather than assuming that positive basicity implies positive results in every amine reaction.
235. An organic reaction is carried out using ethyl benzoate and methanamine under conditions that allow complete aminolysis of the ester.
In a separate experiment, methanamine is treated with benzoic acid at room temperature.
Which statement correctly identifies the principal products and distinguishes the two transformations?
ⓐ. Ethyl benzoate gives N-methylbenzamide and ethanol, whereas benzoic acid principally forms methanaminium benzoate at room temperature.
ⓑ. Ethyl benzoate gives benzylamine and ethanol, whereas benzoic acid gives N-methylbenzamide directly at room temperature.
ⓒ. Ethyl benzoate gives N-ethylbenzamide and methanol, whereas benzoic acid produces benzylamine.
ⓓ. Both reagents give N-methylbenzamide because esters and carboxylic acids undergo identical reactions with methanamine at room temperature.
Correct Answer: Ethyl benzoate gives N-methylbenzamide and ethanol, whereas benzoic acid principally forms methanaminium benzoate at room temperature.
Explanation: Methanamine is a primary aliphatic amine possessing a nitrogen lone pair and two N–H bonds.
It can participate in both acid–base reactions and nucleophilic acyl substitution.
The principal outcome depends on the functional group and reactivity of the reagent.
\(\textbf{Aminolysis of ethyl benzoate:}\)
Ethyl benzoate contains a benzoyl carbonyl group bonded to an ethoxy group.
Under suitable ester-aminolysis conditions, methanamine attacks the acyl carbon and replaces the ethoxy portion.
\[
\mathrm{C_6H_5COOC_2H_5+CH_3NH_2\longrightarrow C_6H_5CONHCH_3+C_2H_5OH}
\]
The nitrogen-containing product is N-methylbenzamide.
The ethoxy group leaves as ethanol, while the benzoyl carbonyl remains in the amide.
The methyl group originally attached to nitrogen remains unchanged.
\(\textbf{Reaction with benzoic acid:}\)
Benzoic acid possesses an acidic O–H bond and can transfer a proton to methanamine.
\[
\mathrm{C_6H_5COOH+CH_3NH_2\rightleftharpoons C_6H_5COO^-+[CH_3NH_3]^+}
\]
The principal product at room temperature is methanaminium benzoate.
Formation of this salt should not be confused with direct conversion into a covalent amide under ordinary room-temperature conditions.
Thus, the ester reaction involves nucleophilic acyl substitution, whereas the carboxylic-acid reaction principally involves proton transfer.
The distinction requires identifying both the nitrogen-containing product and the fate of the original oxygen-containing group.
236. Methyl ethanoate is reacted completely with diethylamine under suitable ester-aminolysis conditions to form compound P.
The isolated P is reduced completely with \(\mathrm{LiAlH_4}\) in dry ether, followed by hydrolytic work-up, to form Q.
Which statement correctly identifies P, Q and the fate of the methoxy group originally present in the ester?
ⓐ. P is N-ethylethanamide; Q is diethylamine; the methoxy carbon becomes part of Q.
ⓑ. P is diethylammonium ethanoate; Q is triethylamine; the methoxy carbon becomes an additional nitrogen-bound methyl group.
ⓒ. P is N,N-diethylmethanamide; Q is N,N-dimethylethanamine; the methoxy group remains bonded to nitrogen.
ⓓ. P is N,N-diethylethanamide; Q is triethylamine; the methoxy portion is released as methanol during aminolysis.
Correct Answer: P is N,N-diethylethanamide; Q is triethylamine; the methoxy portion is released as methanol during aminolysis.
Explanation: The starting ester contains an ethanoyl group and a methoxy group.
Diethylamine is a secondary amine with two ethyl groups and one N–H bond.
The N–H bond permits formation of a neutral amide through nucleophilic acyl substitution.
\(\textbf{Formation of the amide P:}\)
\[
\mathrm{CH_3COOCH_3+(C_2H_5)_2NH\longrightarrow CH_3CON(C_2H_5)_2+CH_3OH}
\]
The product P is N,N-diethylethanamide.
Both original ethyl groups remain attached to nitrogen.
The methoxy portion of the ester is released as methanol.
It does not become a substituent on the amide nitrogen.
\(\textbf{Reduction of P:}\)
Lithium aluminium hydride reduces the carbonyl group of the amide to a methylene group.
\[
\mathrm{CH_3CON(C_2H_5)_2\xrightarrow[\text{work-up}]{LiAlH_4}CH_3CH_2N(C_2H_5)_2}
\]
The resulting nitrogen is bonded to three ethyl groups.
Therefore, Q is triethylamine, a tertiary amine.
\(\textbf{Carbon-skeleton interpretation:}\)
The original ethanoyl carbonyl carbon becomes the methylene carbon of the newly formed ethyl group.
The acetyl methyl carbon remains attached to that methylene carbon.
The methoxy carbon is absent from the final amine because it was removed as part of methanol.
This prevents the common mistake of counting every carbon atom of an ester as part of the amine produced after aminolysis and reduction.
The two reaction stages therefore involve different structural changes: replacement of the ester alkoxy group followed by reduction of the retained acyl carbonyl.
237. Equal analytical concentrations of aniline and ethanamine are present in a buffered aqueous solution at pH 7.00 and \(25^\circ\mathrm{C}\).
The conjugate-acid pKa values are:
\[
\mathrm{p}K_a(\text{anilinium})=4.62
\]
\[
\mathrm{p}K_a(\text{ethanaminium})=10.71
\]
For an amine B, the fraction present as the neutral free base is:
\[
f_B=\frac{1}{1+10^{\mathrm{p}K_a-\mathrm{pH}}}
\]
Using \(10^{3.71}\approx5.13\times10^3\) and \(10^{-2.38}\approx0.00417\), what is the approximate ratio of the neutral free-base concentrations?
\[
\frac{[\text{neutral aniline}]}{[\text{neutral ethanamine}]}
\]
ⓐ. \(1.95\times10^{-4}\)
ⓑ. \(2.39\times10^2\)
ⓒ. \(5.11\times10^3\)
ⓓ. \(1.00\)
Correct Answer: \(5.11\times10^3\)
Explanation: Both substances are primary amines, but their aqueous basic strengths differ substantially.
Aniline is much weaker as a base because its nitrogen lone pair is partly delocalised into the benzene ring.
Ethanamine is a stronger aliphatic base and remains extensively protonated at pH 7.00.
The required ratio concerns neutral concentrations rather than total analytical concentrations.
\(\textbf{Neutral fraction of aniline:}\)
The relevant relation is:
\[
f_{\mathrm{aniline}}=\frac{1}{1+10^{4.62-7.00}}
\]
Substituting the supplied exponential value:
\[
f_{\mathrm{aniline}}=\frac{1}{1+0.00417}
\]
\[
f_{\mathrm{aniline}}\approx0.99585
\]
Thus, approximately 99.6% of the total aniline is present as the neutral free base.
\(\textbf{Neutral fraction of ethanamine:}\)
\[
f_{\mathrm{ethanamine}}=\frac{1}{1+10^{10.71-7.00}}
\]
\[
=\frac{1}{1+5.13\times10^3}
\]
\[
f_{\mathrm{ethanamine}}\approx1.949\times10^{-4}
\]
Only a small fraction of ethanamine is neutral at this pH.
\(\textbf{Use equal analytical concentrations:}\)
Let the total analytical concentration of each amine be C.
\[
[\text{neutral aniline}]=Cf_{\mathrm{aniline}}
\]
\[
[\text{neutral ethanamine}]=Cf_{\mathrm{ethanamine}}
\]
Taking the ratio eliminates C.
\[
\frac{[\text{neutral aniline}]}{[\text{neutral ethanamine}]}
=\frac{0.99585}{1.949\times10^{-4}}
\]
\[
\approx5.11\times10^3
\]
\(\textbf{Chemical interpretation:}\)
Aniline is predominantly neutral, whereas ethanamine is predominantly present as its ethanaminium ion.
The fact that ethanamine is the stronger base does not mean it has the greater neutral concentration under these conditions.
A stronger base can exist mainly in its protonated form at a pH well below its conjugate-acid pKa.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{[\text{neutral aniline}]}{[\text{neutral ethanamine}]}\approx5.11\times10^3}
\]
238. Consider all distinct saturated acyclic secondary monoamines having molecular formula \(\mathrm{C_5H_{13}N}\).
A simple secondary amine has two identical alkyl groups attached to nitrogen, whereas a mixed secondary amine has two different alkyl groups.
Which statement correctly gives the number of distinct secondary-amine constitutional isomers and the number of simple secondary amines among them?
ⓐ. Six constitutional isomers, none of which is simple
ⓑ. Five constitutional isomers, one of which is simple
ⓒ. Seven constitutional isomers, two of which are simple
ⓓ. Six constitutional isomers, two of which are simple
Correct Answer: Six constitutional isomers, none of which is simple
Explanation: A secondary amine contains two alkyl groups and one hydrogen atom attached to nitrogen.
The five carbon atoms must therefore be distributed between two nonempty alkyl groups.
There are two distinct numerical partitions of five into two positive group sizes.
\(\textbf{Partition 1+4:}\)
One group is methyl, while the second is a four-carbon alkyl group.
The four possible butyl groups are butan-1-yl, butan-2-yl, 2-methylpropan-1-yl and 2-methylpropan-2-yl.
They generate four distinct methylbutylamine constitutional isomers.
Although some possess branched carbon skeletons, all remain secondary because nitrogen is bonded to two organic groups.
\(\textbf{Partition 2+3:}\)
One group is ethyl, while the second is a three-carbon alkyl group.
The three-carbon group can be propan-1-yl or propan-2-yl.
Therefore, two additional secondary-amine constitutional isomers are possible.
\(\textbf{Total structural count:}\)
\[
N_{\mathrm{secondary}}=4+2
\]
\[
N_{\mathrm{secondary}}=6
\]
\(\textbf{Simple versus mixed classification:}\)
A simple secondary amine must contain two identical alkyl groups.
Such a pair contributes an even number of carbon atoms to the molecular structure.
However, the required formula contains five carbon atoms.
Therefore, no simple secondary amine can satisfy the formula.
Every secondary constitutional isomer in this set is mixed.
The result requires both exhaustive carbon partitioning and an independent check of substituent identity.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{secondary}}=6,\qquad N_{\mathrm{simple}}=0}
\]
239. Piperazine is a saturated six-membered heterocycle containing two secondary amino nitrogen atoms at opposite positions in the ring.
A sample is treated with one equivalent of benzoyl chloride under controlled conditions that give only the monobenzoylated product P, without unreacted piperazine or dibenzoylated material.
P is then treated with dilute hydrochloric acid.
Which statement correctly describes the two nitrogen atoms of P?
ⓐ. Both nitrogens are converted into tertiary amines, so neither can be protonated.
ⓑ. One nitrogen becomes part of an amide, while the other remains a secondary amino nitrogen capable of protonation.
ⓒ. One nitrogen becomes quaternary ammonium nitrogen, while the other becomes primary.
ⓓ. Both nitrogen atoms remain secondary amines because attaching a benzoyl group cannot change nitrogen functionality.
Correct Answer: One nitrogen becomes part of an amide, while the other remains a secondary amino nitrogen capable of protonation.
Explanation: Piperazine contains two equivalent secondary amino nitrogen atoms in its original structure.
Each nitrogen is bonded to two ring carbon atoms and possesses one hydrogen atom.
Consequently, either nitrogen is capable of ordinary N-benzoylation.
The reaction conditions specify that only one benzoyl group is introduced per molecule.
\(\textbf{The benzoylated nitrogen:}\)
One nitrogen reacts with benzoyl chloride by nucleophilic acyl substitution.
Its N–H hydrogen is replaced with a benzoyl group.
The resulting nitrogen is directly bonded to a carbonyl carbon and becomes part of an amide functionality.
Its lone pair is involved in resonance with the benzoyl carbonyl group.
It therefore no longer behaves as an ordinary secondary amine.
\(\textbf{The unbenzoylated nitrogen:}\)
The second nitrogen retains its original two ring-carbon bonds and one N–H bond.
It remains a secondary amino nitrogen with an available lone pair.
Dilute hydrochloric acid can protonate this remaining basic amino centre.
\(\textbf{Why the distinction matters:}\)
Monobenzoylation changes one nitrogen environment without necessarily changing the second.
The product consequently contains both an amide nitrogen and a secondary amino nitrogen.
It should not be classified as a molecule containing two equivalent secondary amines after the reaction.
Nor should benzoylation be confused with quaternisation, because no fourth nitrogen–carbon bond is introduced at the unreacted nitrogen.
This is an example of how controlled functionalisation can create two chemically different nitrogen centres from an initially symmetric diamine.
240. Two saturated diamines are separately subjected to exhaustive N-methylation with methyl iodide under conditions permitting all necessary deprotonation steps.
P is ethane-1,2-diamine, \(\mathrm{H_2NCH_2CH_2NH_2}\).
Q is piperazine, a six-membered saturated ring containing two secondary amino nitrogen atoms.
Each sample contains \(0.050\,\mathrm{mol}\) of the respective diamine.
Assume complete conversion of both nitrogen atoms of every molecule into quaternary ammonium centres, with one methyl iodide molecule consumed for each newly introduced N-methyl group.
How many moles of methyl iodide are required for the two samples combined?
ⓐ. \(0.300\,\mathrm{mol}\)
ⓑ. \(0.400\,\mathrm{mol}\)
ⓒ. \(0.500\,\mathrm{mol}\)
ⓓ. \(0.600\,\mathrm{mol}\)
Correct Answer: \(0.500\,\mathrm{mol}\)
Explanation: Both starting compounds contain two nitrogen atoms per molecule.
However, their nitrogen atoms begin with different degrees of substitution.
The methyl iodide requirement must be calculated from the number of new nitrogen–carbon bonds required to reach four organic substituents at each nitrogen centre.
\(\textbf{Ethane-1,2-diamine — Two primary nitrogen sites:}\)
Each nitrogen is initially bonded to one carbon-containing group.
A quaternary ammonium nitrogen must be bonded to four carbon-containing groups.
Therefore, each primary amino nitrogen requires three methyl groups.
With two nitrogen sites per molecule:
\[
n_{\mathrm{CH_3I\ per\ molecule\ of\ P}}=2\times3
\]
\[
=6
\]
For \(0.050\,\mathrm{mol}\) of P:
\[
n_{\mathrm{CH_3I,P}}=6(0.050)
\]
\[
=0.300\,\mathrm{mol}
\]
\(\textbf{Piperazine — Two secondary nitrogen sites:}\)
Each piperazine nitrogen is initially bonded to two ring carbon atoms.
It therefore requires two additional methyl groups to reach the quaternary ammonium state.
With two nitrogen sites per molecule:
\[
n_{\mathrm{CH_3I\ per\ molecule\ of\ Q}}=2\times2
\]
\[
=4
\]
For \(0.050\,\mathrm{mol}\) of Q:
\[
n_{\mathrm{CH_3I,Q}}=4(0.050)
\]
\[
=0.200\,\mathrm{mol}
\]
\(\textbf{Combined reagent requirement:}\)
\[
n_{\mathrm{CH_3I,total}}=0.300+0.200
\]
\[
=0.500\,\mathrm{mol}
\]
\(\textbf{Charge and structure check:}\)
Each completely methylated diamine molecule contains two quaternary ammonium nitrogen centres.
Its organic ion therefore carries a total positive charge of \(+2\).
Both starting compounds ultimately form dications, but P consumes more methyl iodide because its nitrogen atoms initially have fewer carbon-containing substituents.
The calculation depends on nitrogen-site classification rather than merely on the number of nitrogen atoms per molecule.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{CH_3I,total}}=0.500\,\mathrm{mol}}
\]
241. A sample contains \(0.080\,\mathrm{mol}\) of ethanaminium chloride, \(\mathrm{[C_2H_5NH_3]^+Cl^-}\).
It is heated with chloroform and sufficient ethanolic potassium hydroxide under conditions that quantitatively liberate ethanamine and then convert all the liberated primary amine into ethyl isocyanide.
Assume no other KOH-consuming reactions and that the ammonium salt initially contains no free ethanamine.
What is the minimum stoichiometric amount of KOH consumed in the complete two-stage process?
ⓐ. \(0.160\,\mathrm{mol}\)
ⓑ. \(0.240\,\mathrm{mol}\)
ⓒ. \(0.320\,\mathrm{mol}\)
ⓓ. \(0.400\,\mathrm{mol}\)
Correct Answer: \(0.320\,\mathrm{mol}\)
Explanation: Ethanaminium chloride contains protonated primary amino nitrogen.
The ordinary carbylamine reaction is expressed for a free primary amine.
Therefore, the initial ammonium salt must first be converted into ethanamine under the specified alkaline conditions.
The total KOH consumption includes this liberation step and the subsequent carbylamine reaction.
\(\textbf{Stage 1 — Liberation of ethanamine:}\)
\[
\mathrm{[C_2H_5NH_3]^+Cl^-+KOH\longrightarrow C_2H_5NH_2+KCl+H_2O}
\]
One mole of KOH is consumed per mole of ethanaminium chloride.
\[
n_{\mathrm{KOH,liberation}}=1(0.080)
\]
\[
=0.080\,\mathrm{mol}
\]
\(\textbf{Stage 2 — Carbylamine formation:}\)
The regenerated ethanamine is a primary aliphatic amine.
It reacts with chloroform and ethanolic potassium hydroxide to form ethyl isocyanide.
\[
\mathrm{C_2H_5NH_2+CHCl_3+3KOH\longrightarrow C_2H_5NC+3KCl+3H_2O}
\]
This stage consumes three moles of KOH per mole of ethanamine.
\[
n_{\mathrm{KOH,carbylamine}}=3(0.080)
\]
\[
=0.240\,\mathrm{mol}
\]
\(\textbf{Combined consumption:}\)
\[
n_{\mathrm{KOH,total}}=0.080+0.240
\]
\[
=0.320\,\mathrm{mol}
\]
\(\textbf{Overall-equation check:}\)
Adding the two stages gives:
\[
\mathrm{[C_2H_5NH_3]^+Cl^-+CHCl_3+4KOH\longrightarrow C_2H_5NC+4KCl+4H_2O}
\]
The equation accounts for one hydroxide equivalent in ammonium-salt liberation and three in carbylamine formation.
Counting only the three equivalents required by the standard free-amine reaction would neglect the initial protonation state.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{KOH,total}}=0.320\,\mathrm{mol}}
\]
242. A reaction vessel initially contains \(0.200\,\mathrm{mol}\) of methanamine and \(0.100\,\mathrm{mol}\) of ethanoic anhydride.
Assume the following sequential processes occur quantitatively:
(i) One methanamine molecule converts one ethanoic anhydride molecule into N-methylethanamide and ethanoic acid.
(ii) Each ethanoic acid molecule subsequently protonates one additional methanamine molecule to form methanaminium ethanoate.
No other reactions occur.
Which statement correctly identifies the final amounts of the two principal nitrogen-containing products?
ⓐ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) methanaminium ethanoate
ⓑ. \(0.200\,\mathrm{mol}\) N-methylethanamide and no methanaminium ethanoate
ⓒ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.200\,\mathrm{mol}\) methanaminium ethanoate
ⓓ. \(0.050\,\mathrm{mol}\) N-methylethanamide and \(0.150\,\mathrm{mol}\) methanaminium ethanoate
Correct Answer: \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) methanaminium ethanoate
Explanation: Ethanoic anhydride contains two ethanoyl portions linked through oxygen.
Under suitable conditions, a primary amine can undergo nucleophilic acyl substitution with an acid anhydride.
The specified reaction produces an amide and a carboxylic acid.
The carboxylic acid can then protonate another molecule of the amine.
\(\textbf{Stage 1 — Formation of N-methylethanamide:}\)
\[
\mathrm{(CH_3CO)_2O+CH_3NH_2\longrightarrow CH_3CONHCH_3+CH_3COOH}
\]
One mole of anhydride consumes one mole of methanamine and produces one mole of amide.
For the given amount of anhydride:
\[
n_{\mathrm{amide}}=0.100\,\mathrm{mol}
\]
Methanamine consumed:
\[
n_{\mathrm{amine,stage\ 1}}=0.100\,\mathrm{mol}
\]
Methanamine remaining:
\[
n_{\mathrm{amine,remaining}}=0.200-0.100
\]
\[
=0.100\,\mathrm{mol}
\]
\(\textbf{Stage 2 — Salt formation:}\)
The first stage also produces \(0.100\,\mathrm{mol}\) of ethanoic acid.
\[
\mathrm{CH_3COOH+CH_3NH_2\rightleftharpoons[CH_3NH_3]^+[CH_3COO]^-}
\]
Under the stipulated quantitative proton-transfer conditions:
\[
n_{\mathrm{methanaminium\ ethanoate}}=0.100\,\mathrm{mol}
\]
\(\textbf{Overall nitrogen balance:}\)
The two original amine portions are accounted for separately.
\[
n_{\mathrm{amine\ units\ in\ products}}=0.100+0.100
\]
\[
=0.200\,\mathrm{mol}
\]
One portion becomes covalently incorporated into an amide, while the other becomes an ammonium salt.
The two products should not be combined into a single amount of amide merely because both contain an ethanoyl-derived carbon framework.
\(\textbf{Final answer:}\)
\[
\left(n_{\mathrm{amide}},n_{\mathrm{salt}}\right)=\left(0.100,\ 0.100\right)\,\mathrm{mol}
\]
243. Ethyl methanoate, \(\mathrm{HCOOC_2H_5}\), is reacted with aniline under suitable forcing conditions that quantitatively convert the ester into its corresponding N-phenylamide.
The isolated amide P is then reduced completely with \(\mathrm{LiAlH_4}\), followed by hydrolytic work-up.
Which statement correctly identifies P and the final amine Q?
ⓐ. P is acetanilide and Q is N-ethylaniline.
ⓑ. P is N-phenylmethanamide and Q is N-methylaniline.
ⓒ. P is N-ethylmethanamide and Q is benzylamine.
ⓓ. P is benzanilide and Q is N-benzylaniline.
Correct Answer: P is N-phenylmethanamide and Q is N-methylaniline.
Explanation: Ethyl methanoate is an ester of methanoic acid.
Its acyl portion contains only one carbon atom, while its ethoxy group contains two carbon atoms.
Aniline is a primary aromatic amine and has nitrogen-bound hydrogen atoms available for acylation.
\(\textbf{Ester aminolysis:}\)
Under the specified conditions, aniline replaces the ethoxy group at the acyl carbon.
\[
\mathrm{HCOOC_2H_5+C_6H_5NH_2\longrightarrow HCONHC_6H_5+C_2H_5OH}
\]
The resulting compound P is N-phenylmethanamide, commonly called formanilide.
The ethoxy portion is removed as ethanol.
Its two carbon atoms do not become part of the N-substituent introduced during this step.
\(\textbf{Reduction of the formamide:}\)
Lithium aluminium hydride reduces the carbonyl carbon to a methylene group.
\[
\mathrm{HCONHC_6H_5\xrightarrow[\text{work-up}]{LiAlH_4}CH_3NHC_6H_5}
\]
The formyl group, \(\mathrm{-CHO}\), has become a methyl group attached to nitrogen.
The final product Q is N-methylaniline.
\(\textbf{Distinguish formyl and acetyl reductions:}\)
Reduction of an N-formyl derivative introduces an N-methyl group.
Reduction of an N-acetyl derivative instead introduces an N-ethyl group.
The carbon count of the introduced substituent is determined by the acyl portion retained in the amide, not by the alkoxy portion of the original ester.
The final product is a secondary aromatic amine because nitrogen is bonded to one phenyl group, one methyl group and one hydrogen.
This product prediction therefore requires identifying the ester acyl group, following the aminolysis product and tracking the carbonyl carbon through reduction.
244. A saturated acyclic diamine X contains two amino nitrogen atoms.
Its structure is:
\[
\mathrm{H_2NCH_2CH_2CH_2NH_2}
\]
It is treated with exactly one mole of ethanoic anhydride per mole of X under conditions that quantitatively produce the mono-N-acetyl derivative P, without diacetylation.
The isolated P is subsequently treated with excess dilute hydrochloric acid under conditions that protonate its remaining free amino group but do not hydrolyse its amide.
Which statement correctly describes the final nitrogen-containing compound?
ⓐ. It contains two protonated primary amino groups because anhydride acylation does not change nitrogen functionality.
ⓑ. It contains one amide nitrogen and one protonated primary amino nitrogen.
ⓒ. It contains one tertiary amino nitrogen and one unprotonated primary amino nitrogen.
ⓓ. It contains two amide nitrogens because ethanoic anhydride necessarily acetylates both amino groups with one equivalent.
Correct Answer: It contains one amide nitrogen and one protonated primary amino nitrogen.
Explanation: The starting molecule is propane-1,3-diamine.
It contains two terminal primary amino groups related by symmetry.
Each nitrogen is bonded to one carbon atom and possesses two nitrogen-bound hydrogen atoms.
The prescribed reagent quantity and reaction conditions specify mono-N-acetylation.
\(\textbf{First transformation — Formation of a monoamide:}\)
One of the primary amino groups undergoes N-acetylation with ethanoic anhydride.
Because the amino groups are symmetry equivalent in the original molecule, reaction at either end produces the same constitutional monoacetylated compound.
A representative structure is:
\[
\mathrm{CH_3CONHCH_2CH_2CH_2NH_2}
\]
One nitrogen has become part of an amide functionality.
The other nitrogen remains part of a free primary amino group.
\(\textbf{Second transformation — Selective protonation:}\)
Dilute hydrochloric acid can protonate the remaining free amino group.
The amide nitrogen is much less basic because its lone pair is delocalised toward the carbonyl group.
Under the stipulated conditions, the amide linkage is preserved.
The principal nitrogen-containing structure can therefore be represented as:
\[
\mathrm{CH_3CONHCH_2CH_2CH_2NH_3^+Cl^-}
\]
The compound contains one amide nitrogen and one primary ammonium nitrogen.
It does not contain two ordinary protonated primary amino groups.
The first reaction changes the functional-group identity of one nitrogen, while the second changes the protonation state of the other.
The correct prediction requires distinguishing covalent acetylation from reversible acid–base protonation within the same molecule.
245. Two compounds with molecular formula \(\mathrm{C_5H_{11}N}\) are compared.
P is cyclopentanamine, containing a primary amino group attached outside a five-membered carbon ring.
Q is piperidine, containing one secondary amino nitrogen within a saturated six-membered ring.
Both compounds are separately N-acetylated with ethanoyl chloride under suitable conditions, and the isolated amides are completely reduced with \(\mathrm{LiAlH_4}\).
Which statement correctly compares their final amine classes?
ⓐ. P becomes secondary, whereas Q becomes tertiary.
ⓑ. P becomes tertiary, whereas Q becomes secondary.
ⓒ. Both become secondary because reduction removes the newly introduced acetyl group.
ⓓ. Both become tertiary because every N-acylated compound is a tertiary amine after reduction.
Correct Answer: P becomes secondary, whereas Q becomes tertiary.
Explanation: The two starting compounds have identical molecular formulas but different placements of nitrogen.
P is cyclopentanamine, a primary amine.
Its nitrogen is attached to one cyclopentyl group and contains two N–H bonds.
Q is piperidine, a secondary cyclic amine.
Its nitrogen is attached to two ring carbon atoms and contains one N–H bond.
Both compounds can undergo ordinary N-acetylation.
\(\textbf{Pathway from P:}\)
Acetylation of cyclopentanamine introduces an acetyl group onto nitrogen.
Reduction with lithium aluminium hydride converts the acetyl carbonyl into a methylene group.
The added acetyl substituent therefore becomes an ethyl substituent.
The final nitrogen is attached to a cyclopentyl group and an ethyl group.
It retains one N–H bond and is secondary.
\(\textbf{Pathway from Q:}\)
Acetylation of piperidine replaces its only N–H hydrogen with an acetyl group.
After lithium aluminium hydride reduction, that acetyl group becomes an N-ethyl substituent.
The ring nitrogen remains bonded to the two original ring carbon atoms.
It also becomes bonded to an ethyl group and therefore possesses three nitrogen–carbon bonds.
The final compound is N-ethylpiperidine, a tertiary amine.
The original cyclic carbon frameworks remain intact under the specified reactions.
The different final amine classes arise because each pathway introduces one additional carbon-containing group onto a nitrogen atom that began with a different substitution degree.
246. A chemist wishes to distinguish three nitrogen-containing compounds through a combination of ordinary protonation, carbylamine testing and acid-amide formation.
The compounds are:
P: \(\mathrm{C_6H_5NH_2}\)
Q: \(\mathrm{C_6H_5NHCH_3}\)
R: \(\mathrm{C_6H_5N(CH_3)_2}\)
The chemist proposes the following statements.
Statement I: All three neutral compounds contain nitrogen lone pairs and can form ammonium salts with a suitable strong acid.
Statement II: Only P can give the ordinary positive carbylamine reaction.
Statement III: P and Q can undergo ordinary N-acylation because each possesses at least one nitrogen-bound hydrogen.
Statement IV: R cannot be protonated because its nitrogen lacks an N–H bond.
Statement V: Protonation of P and N-acylation of P produce equivalent nitrogen bonding environments.
Which combination is correct?
ⓐ. I, II, III and IV only
ⓑ. II, III and V only
ⓒ. I, II and III only
ⓓ. I, III, IV and V only
Correct Answer: I, II and III only
Explanation: P, Q and R are primary, secondary and tertiary aromatic amines, respectively.
Their nitrogen atoms all possess lone pairs in the neutral compounds.
However, the number of N–H bonds differs among the three structures.
Statement I is correct because a suitable strong acid can protonate each neutral amino nitrogen.
The absence of an N–H bond in the starting tertiary amine does not prevent proton acceptance.
Statement II is correct because the carbylamine reaction requires primary-amine character.
P is aniline and possesses a primary aromatic amino group.
Q and R are secondary and tertiary amines and do not undergo the normal positive carbylamine reaction.
Statement III is correct because ordinary neutral-amide-forming N-acylation requires an available N–H bond.
P has two N–H bonds, while Q has one.
Both can therefore react with suitable acid chlorides or acid anhydrides to form N-acyl derivatives.
Statement IV is incorrect because R retains a nitrogen lone pair despite having no nitrogen-bound hydrogen.
It can accept a proton and form an ammonium salt.
Statement V is incorrect because protonation and N-acylation are fundamentally different transformations.
Protonation introduces an additional N–H bond and gives a positively charged ammonium centre.
N-Acylation introduces a covalent bond to an acyl carbonyl group and forms an amide.
The resulting amide nitrogen also participates in carbonyl resonance, unlike the protonated ammonium nitrogen.
The correct combination requires distinguishing lone-pair-dependent basicity, primary-amine-specific reactivity and N–H-dependent acylation.
247. An unknown compound X has the structure \(\mathrm{CH_3CH[N(CH_3)(C_2H_5)]CH_2CH_3}\). It is separately subjected to treatment with methyl iodide, benzoyl chloride in the presence of pyridine, and a suitable strong acid.
Consider the following statements.
Statement I: Its systematic name is N-ethyl-N-methylbutan-2-amine.
Statement II: The carbon atom at position 2 of the butane framework is stereogenic.
Statement III: Ordinary N-benzoylation produces a neutral amide because the nitrogen possesses an available lone pair.
Statement IV: The compound can form a quaternary ammonium salt with methyl iodide.
Statement V: Protonation can occur without changing the original nitrogen–carbon bonds.
Which combination is correct?
ⓐ. I, II, III and IV only
ⓑ. I, III, IV and V only
ⓒ. II, III and V only
ⓓ. I, II, IV and V only
Correct Answer: I, II, IV and V only
Explanation: The structure contains a four-carbon parent chain with nitrogen attached to carbon 2.
The nitrogen is additionally bonded to one methyl group and one ethyl group.
Statement I is correct because these nitrogen substituents are indicated by the locants N-methyl and N-ethyl.
The systematic name is N-ethyl-N-methylbutan-2-amine.
Statement II is correct because carbon 2 is bonded to four different groups: hydrogen, methyl, ethyl and the substituted amino group.
It is therefore a stereogenic carbon atom.
The nitrogen itself must not be confused with this carbon stereocentre.
Statement III is incorrect because the molecule is a tertiary amine with three nitrogen–carbon bonds and no N–H bond.
Although nitrogen possesses a lone pair, ordinary neutral-amide-forming N-benzoylation requires a replaceable N–H hydrogen.
Statement IV is correct because the tertiary nitrogen can attack the methyl group of methyl iodide.
This introduces a fourth nitrogen–carbon bond and produces a quaternary ammonium iodide.
Statement V is correct because a strong acid can protonate the nitrogen lone pair without removing any of its original carbon substituents.
The resulting ammonium ion contains three N–C bonds and one N–H bond.
Thus, N-methylation and protonation both use the nitrogen lone pair but produce different positively charged nitrogen centres.
The correct combination requires reconstruction of the systematic name, stereogenic-carbon identification and discrimination between three different nitrogen reactions.
248. Two compounds have the same molecular formula, \(\mathrm{C_6H_7NO}\).
P is 2-aminophenol, in which the amino and hydroxyl groups occupy adjacent positions on a benzene ring.
Q is 4-aminophenol, in which these groups occupy para positions.
Both contain free primary aromatic amino groups.
Which statement correctly combines their hydrogen-bonding possibilities with their amine classification?
ⓐ. P can form a favourable intramolecular hydrogen bond between its adjacent functional groups; Q cannot form the corresponding adjacent-group hydrogen bond, but both remain primary aromatic amines.
ⓑ. Q can form the same adjacent-group intramolecular hydrogen bond more readily than P because para substituents are farther apart.
ⓒ. P is a secondary aromatic amine because its amino group is adjacent to hydroxyl, whereas Q is primary.
ⓓ. Intramolecular hydrogen bonding in P requires permanent removal of an N–H bond and converts its nitrogen into a tertiary amine.
Correct Answer: P can form a favourable intramolecular hydrogen bond between its adjacent functional groups; Q cannot form the corresponding adjacent-group hydrogen bond, but both remain primary aromatic amines.
Explanation: Both compounds contain one amino group and one phenolic hydroxyl group attached to benzene.
Their molecular formulas and functional-group identities are identical.
The difference is the relative position of these groups on the aromatic ring.
In P, the amino and hydroxyl groups occupy neighbouring carbon atoms.
Their proximity permits a favourable intramolecular hydrogen-bonding interaction.
The phenolic O–H group can act as a hydrogen-bond donor, while the amino nitrogen possesses a lone pair capable of accepting a hydrogen bond.
In Q, the groups are positioned opposite one another on the benzene ring.
They cannot form the same local adjacent-group intramolecular hydrogen bond.
However, Q can participate in intermolecular hydrogen bonding with other molecules.
Therefore, the two constitutional isomers need not have identical patterns of molecular association.
Hydrogen bonding does not ordinarily require the permanent breaking of the covalent N–H or O–H bonds.
Both nitrogen atoms remain directly bonded to one aromatic carbon and possess two N–H bonds.
Consequently, both compounds are primary aromatic amines.
Both are structurally eligible for the ordinary carbylamine reaction despite their different hydrogen-bonding environments.
The comparison distinguishes molecular association from covalent substitution at nitrogen and demonstrates that positional isomerism can affect physical behaviour without changing amine class.
249. A vessel initially contains \(0.120\,\mathrm{mol}\) of dimethylamine, \(\mathrm{(CH_3)_2NH}\), dissolved in water. Exactly \(0.060\,\mathrm{mol}\) of HCl is added, and the final solution volume is adjusted to \(1.00\,\mathrm{L}\).
Assume quantitative proton transfer and ideal buffer behaviour.
Given at \(25^\circ\mathrm{C}\):
\[
\mathrm{p}K_b(\text{dimethylamine})=3.27,\qquad \mathrm{p}K_w=14.00
\]
For the buffer:
\[
\mathrm{pOH}=\mathrm{p}K_b+\log_{10}\frac{[\mathrm{BH^+}]}{[\mathrm{B}]}
\]
What is the approximate final pH?
ⓐ. 3.27
ⓑ. 7.00
ⓒ. 10.73
ⓓ. 12.64
Correct Answer: 10.73
Explanation: Dimethylamine is a weak base containing a nitrogen lone pair.
Hydrochloric acid is a strong acid and protonates the amine.
Because the supplied HCl is insufficient to protonate the entire initial amount, the final solution contains both the weak base and its conjugate acid.
This creates a basic buffer.
\(\textbf{Neutralisation reaction:}\)
\[
\mathrm{(CH_3)_2NH+HCl\longrightarrow[(CH_3)_2NH_2]^+Cl^-}
\]
\(\textbf{Initial amounts:}\)
\[
n_{\mathrm{B,initial}}=0.120\,\mathrm{mol}
\]
\[
n_{\mathrm{HCl}}=0.060\,\mathrm{mol}
\]
\(\textbf{Amounts after quantitative proton transfer:}\)
Each mole of HCl converts one mole of free amine into its conjugate acid.
\[
n_{\mathrm{B,remaining}}=0.120-0.060
\]
\[
n_{\mathrm{B,remaining}}=0.060\,\mathrm{mol}
\]
\[
n_{\mathrm{BH^+,formed}}=0.060\,\mathrm{mol}
\]
The free base and conjugate acid are therefore present in equal amounts.
\(\textbf{Buffer calculation:}\)
\[
\mathrm{pOH}=\mathrm{p}K_b+\log_{10}\frac{[\mathrm{BH^+}]}{[\mathrm{B}]}
\]
Because the species occupy the same final volume:
\[
\mathrm{pOH}=3.27+\log_{10}\frac{0.060}{0.060}
\]
\[
\mathrm{pOH}=3.27+\log_{10}1
\]
\[
\mathrm{pOH}=3.27
\]
\(\textbf{Convert pOH into pH:}\)
\[
\mathrm{pH}=\mathrm{p}K_w-\mathrm{pOH}
\]
\[
\mathrm{pH}=14.00-3.27
\]
\[
\mathrm{pH}=10.73
\]
\(\textbf{Chemical consistency check:}\)
The solution remains basic because it contains a weak base and its conjugate acid rather than excess strong mineral acid.
The equality of their concentrations explains why pOH equals the supplied pKb.
The result requires accounting for the initial neutralisation before applying the buffer relation.
\(\textbf{Final answer:}\)
\[
\boxed{\mathrm{pH}=10.73}
\]
250. A sample contains two secondary amines having the molecular formula \(\mathrm{C_5H_{13}N}\).
P has the structure \(\mathrm{CH_3CH(NHCH_3)CH_2CH_3}\).
Q has the structure \(\mathrm{(CH_3)_2CHCH_2NHCH_3}\).
Which statement correctly compares their carbon stereogenicity and the behaviour of their nitrogen atoms toward ordinary N-acylation?
ⓐ. Both contain one stereogenic carbon, and only P can undergo N-acylation.
ⓑ. P contains one stereogenic carbon while Q has none; both can undergo ordinary N-acylation.
ⓒ. Neither compound contains a stereogenic carbon because both are secondary amines.
ⓓ. Q contains one stereogenic carbon while P has none; both lack N–H bonds.
Correct Answer: P contains one stereogenic carbon while Q has none; both can undergo ordinary N-acylation.
Explanation: Both compounds contain five carbon atoms and one secondary amino nitrogen.
Their nitrogen atoms are bonded to two organic groups and one hydrogen atom.
However, the carbon frameworks are different.
\(\textbf{Stereogenicity of P:}\)
P is N-methylbutan-2-amine.
The amino-bearing carbon is bonded to hydrogen, methyl, ethyl and an N-methylamino group.
These are four different substituents.
Therefore, that carbon atom is stereogenic.
\(\textbf{Stereogenicity of Q:}\)
Q is N-methyl-2-methylpropan-1-amine.
The branched carbon in its isobutyl framework is attached to two identical methyl groups.
The nitrogen-bearing methylene carbon contains two hydrogen atoms.
Neither carbon is a stereogenic centre.
Consequently, Q has no stereogenic carbon.
\(\textbf{N-Acylation comparison:}\)
Both nitrogens retain one N–H bond.
Therefore, each can undergo ordinary N-acylation with a suitable acid chloride or acid anhydride.
The resulting amides contain nitrogen bonded to the original two carbon-containing groups and the newly introduced acyl group.
The different stereogenicity of their carbon frameworks does not change this common secondary-amine reactivity.
The decisive distinction is that stereogenicity depends on the four groups attached to a particular tetrahedral carbon, while ordinary N-acylation depends on the nitrogen bonding environment.
Thus, P and Q differ in one structural property while sharing the functional requirement for the specified reaction.
251. The following experimental observations are obtained for four separate amines.
| Sample | Observation |
|---|
| P | Contains a primary aromatic amino group; its ring also bears a strongly electron-withdrawing nitro group |
| Q | Contains a primary aromatic amino group; its ring also bears an electron-releasing methyl group |
| R | Contains a tertiary aliphatic amino group; does not form an ordinary Hinsberg sulphonamide |
| S | Contains a secondary aliphatic amino group; forms an alkali-insoluble Hinsberg sulphonamide |
A student proposes the following deductions.
Statement I: Both P and Q are structurally eligible for a positive carbylamine reaction despite their different ring substituents.
Statement II: The nitro group in P and the methyl group in Q need not influence nitrogen basicity in the same direction.
Statement III: R and S can both undergo ordinary N-acylation because each possesses an available nitrogen lone pair.
Statement IV: S forms an ordinary Hinsberg sulphonamide, whereas R does not, because their nitrogen-bound hydrogen availability differs.
Which combination is correct?
ⓐ. I and III only
ⓑ. II, III and IV only
ⓒ. I, II and III only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: The four observations involve two aromatic primary amines and two aliphatic amines of different substitution degrees.
Statement I is correct because the carbylamine reaction requires a primary amino group.
Both P and Q contain free primary aromatic amino groups.
Their additional ring substituents do not change the number of organic groups attached directly to the amino nitrogen.
Statement II is correct because nitro and methyl groups have different electronic effects.
A nitro group is strongly electron withdrawing, while a methyl group is generally electron releasing.
Their effects on the basicity of the corresponding aromatic amino groups therefore need not be identical.
Statement III is incorrect because the presence of a nitrogen lone pair is not sufficient for ordinary neutral-amide-forming N-acylation.
R is tertiary and lacks a nitrogen-bound hydrogen.
S is secondary and possesses one N–H bond.
Only S has the ordinary N–H requirement for the specified acylation.
Statement IV is correct because a secondary amine can form an N,N-disubstituted sulphonamide with benzenesulphonyl chloride.
The resulting sulphonamide contains no N–H bond and is insoluble in alkali under the ordinary Hinsberg-test conditions.
A tertiary amine lacks the starting N–H bond needed for the corresponding neutral sulphonamide formation.
The correct interpretation requires three separate decisions concerning primary-amine testing, aromatic substituent effects and nitrogen-substitution-dependent reactivity.
A shared nitrogen lone pair cannot be used as a universal predictor of every amine reaction.
252. An aqueous solution contains the compound represented by:
\[
\mathrm{C_6H_5N_2^+HSO_4^-}
\]
A student describes this substance as benzenediazonium chloride because both salts contain the same positively charged organic ion.
Which statement correctly evaluates the description?
ⓐ. The compound is benzenediazonium hydrogensulphate; its cation is an arenediazonium ion, while its counterion differs from that of benzenediazonium chloride.
ⓑ. The compound is benzenediazonium sulphate because every hydrogen atom must be omitted when naming the anion.
ⓒ. The compound is phenylammonium hydrogensulphate because the two nitrogen atoms form separate amino groups.
ⓓ. The compound is benzenediazonium chloride because the anion does not contribute to the systematic name of a diazonium salt.
Correct Answer: The compound is benzenediazonium hydrogensulphate; its cation is an arenediazonium ion, while its counterion differs from that of benzenediazonium chloride.
Explanation: Diazonium salts contain a positively charged diazonium group attached to an organic framework and an appropriate counterion.
In an arenediazonium salt, the diazonium group is attached directly to an aromatic ring.
The cation in the supplied formula is \(\mathrm{C_6H_5N_2^+}\).
It is the benzenediazonium ion.
The accompanying anion is \(\mathrm{HSO_4^-}\), called hydrogensulphate.
Therefore, the complete compound is benzenediazonium hydrogensulphate.
Benzenediazonium chloride contains the same organic cation but has chloride as its counterion.
Its formula is \(\mathrm{C_6H_5N_2^+Cl^-}\).
The identity of the anion must therefore be included when naming the salt.
The two nitrogen atoms in the diazonium group are not two independently attached amino nitrogen atoms.
Their bonding forms one positively charged nitrogen-containing substituent.
The cation is related synthetically to the aromatic amino group of aniline through diazotisation.
Recognising the counterion becomes particularly important when different diazonium salts are subjected to different reaction or isolation conditions.
Thus, identifying the organic cation alone is insufficient for naming the complete salt.
253. A cold reaction mixture initially contains \(0.080\,\mathrm{mol}\) of aniline, \(0.060\,\mathrm{mol}\) of sodium nitrite and \(0.150\,\mathrm{mol}\) of hydrochloric acid.
Assume quantitative diazotisation at 273–278 K according to:
\[
\mathrm{C_6H_5NH_2+NaNO_2+2HCl\longrightarrow C_6H_5N_2^+Cl^-+NaCl+2H_2O}
\]
No competing reactions occur.
What is the maximum amount of benzenediazonium chloride formed?
ⓐ. \(0.040\,\mathrm{mol}\)
ⓑ. \(0.060\,\mathrm{mol}\)
ⓒ. \(0.075\,\mathrm{mol}\)
ⓓ. \(0.080\,\mathrm{mol}\)
Correct Answer: \(0.060\,\mathrm{mol}\)
Explanation: Diazotisation converts the primary aromatic amino group of aniline into a diazonium group.
The reaction requires sodium nitrite and sufficient hydrochloric acid under cold conditions.
The product amount is determined by the limiting reagent, not by the amount of aniline alone.
\(\textbf{Balanced stoichiometric requirements:}\)
\[
\mathrm{Aniline:NaNO_2:HCl:Diazonium\ salt}=1:1:2:1
\]
\(\textbf{Product permitted by aniline:}\)
\[
n_{\mathrm{product,aniline}}=0.080\,\mathrm{mol}
\]
\(\textbf{Product permitted by sodium nitrite:}\)
\[
n_{\mathrm{product,nitrite}}=0.060\,\mathrm{mol}
\]
\(\textbf{Product permitted by hydrochloric acid:}\)
Two moles of HCl are required for each mole of diazonium salt.
\[
n_{\mathrm{product,HCl}}=\frac{0.150}{2}
\]
\[
n_{\mathrm{product,HCl}}=0.075\,\mathrm{mol}
\]
\(\textbf{Identify the limiting reagent:}\)
\[
n_{\mathrm{product,max}}=\min(0.080,\ 0.060,\ 0.075)
\]
\[
n_{\mathrm{product,max}}=0.060\,\mathrm{mol}
\]
Sodium nitrite is the limiting reagent.
\(\textbf{Reagent-consumption check:}\)
At the calculated extent of reaction:
\[
n_{\mathrm{aniline,consumed}}=0.060\,\mathrm{mol}
\]
\[
n_{\mathrm{HCl,consumed}}=2(0.060)=0.120\,\mathrm{mol}
\]
The remaining amounts are:
\[
n_{\mathrm{aniline,remaining}}=0.080-0.060=0.020\,\mathrm{mol}
\]
\[
n_{\mathrm{HCl,remaining}}=0.150-0.120=0.030\,\mathrm{mol}
\]
Both remaining amounts are nonnegative, confirming that sodium nitrite limits the transformation.
The cold temperature is necessary for preserving the arenediazonium salt during its preparation.
The calculation therefore combines reagent stoichiometry with the condition required for the nitrogen-containing product.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{C_6H_5N_2^+Cl^-}}=0.060\,\mathrm{mol}}
\]
254. Benzenediazonium chloride is prepared in a cold aqueous solution at 273–278 K.
One portion P is treated with fluoroboric acid to obtain the corresponding diazonium fluoroborate, which is isolated and subsequently heated.
A second portion Q is treated with sufficient warm water.
Which statement correctly identifies the major organic products and the relevant distinction between the diazonium salts?
ⓐ. P gives chlorobenzene, while Q gives fluorobenzene because water replaces the diazonium group with fluorine.
ⓑ. P gives phenol, while Q gives benzene because the fluoroborate anion supplies hydroxide.
ⓒ. P and Q both give fluorobenzene because the original diazonium salt contains a positively charged nitrogen group.
ⓓ. P gives fluorobenzene on thermal decomposition of benzenediazonium fluoroborate, whereas Q gives phenol through hydrolytic replacement.
Correct Answer: P gives fluorobenzene on thermal decomposition of benzenediazonium fluoroborate, whereas Q gives phenol through hydrolytic replacement.
Explanation: Benzenediazonium chloride contains the benzenediazonium cation and chloride counterion.
The diazonium group can be replaced by different substituents under appropriately selected conditions.
\(\textbf{Portion P — Fluoroborate formation:}\)
Treatment with fluoroboric acid converts the diazonium salt into the corresponding diazonium fluoroborate.
\[
\mathrm{C_6H_5N_2^+Cl^-+HBF_4\longrightarrow C_6H_5N_2^+BF_4^-+HCl}
\]
Benzenediazonium fluoroborate is comparatively insoluble in water and can be isolated.
NCERT identifies its greater stability at room temperature relative to ordinary cold aqueous benzenediazonium chloride.
On heating, it decomposes to form fluorobenzene.
\[
\mathrm{C_6H_5N_2^+BF_4^-\xrightarrow{\Delta}C_6H_5F+BF_3+N_2}
\]
This is the characteristic Balz–Schiemann transformation.
\(\textbf{Portion Q — Hydrolysis:}\)
Warm water replaces the diazonium group by hydroxyl.
\[
\mathrm{C_6H_5N_2^+Cl^-+H_2O\longrightarrow C_6H_5OH+N_2+HCl}
\]
The organic product is phenol.
Both pathways release nitrogen gas, but they produce different aromatic substituents.
The fluoroborate route introduces fluorine, whereas hydrolysis introduces hydroxyl.
The distinction depends on the counterion-conversion step and the subsequent reaction conditions.
A diazonium salt should therefore not be assumed to give one universal product merely because nitrogen gas is evolved.
255. A chemist wishes to convert benzenediazonium chloride separately into chlorobenzene, bromobenzene, iodobenzene and benzonitrile.
Which row gives an appropriate set of reagents for these four transformations?
| Option | Chlorobenzene | Bromobenzene | Iodobenzene | Benzonitrile |
|---|
| A | \(\mathrm{CuCl/HCl}\) | \(\mathrm{CuBr/HBr}\) | \(\mathrm{KI}\) | \(\mathrm{CuCN/KCN}\) |
| B | \(\mathrm{CuBr/HBr}\) | \(\mathrm{CuCl/HCl}\) | \(\mathrm{KI}\) | \(\mathrm{CuCN/KCN}\) |
| C | \(\mathrm{CuCl/HCl}\) | \(\mathrm{CuBr/HBr}\) | \(\mathrm{HBF_4,\Delta}\) | \(\mathrm{KI}\) |
| D | \(\mathrm{H_2O,\Delta}\) | \(\mathrm{CuBr/HBr}\) | \(\mathrm{KI}\) | \(\mathrm{H_3PO_2}\) |
Choose the correct row.
ⓐ. Row A
ⓑ. Row B
ⓒ. Row C
ⓓ. Row D
Correct Answer: Row A
Explanation: The diazonium group is a particularly effective leaving group in aromatic substitution reactions.
Its replacement can introduce several substituents that are difficult to install through ordinary nucleophilic substitution of aryl halides.
\(\textbf{Replacement by chlorine:}\)
Benzenediazonium chloride reacts with cuprous chloride in the presence of hydrochloric acid to give chlorobenzene.
The diazonium group is replaced by chlorine with evolution of nitrogen.
\(\textbf{Replacement by bromine:}\)
Cuprous bromide in the presence of hydrobromic acid provides the corresponding bromination route.
The product is bromobenzene.
These copper(I)-assisted substitutions are examples of Sandmeyer reactions.
\(\textbf{Replacement by iodine:}\)
Potassium iodide converts an appropriate arenediazonium salt into the corresponding aryl iodide.
Copper(I) halide is not required for this ordinary iodide substitution.
The organic product is iodobenzene.
\(\textbf{Replacement by cyanide:}\)
Cuprous cyanide under appropriate cyanide-containing conditions replaces the diazonium group with \(\mathrm{-CN}\).
The product is benzonitrile.
The carbon atom of the cyanide group becomes directly bonded to the aromatic carbon formerly bearing the diazonium group.
\(\textbf{Eliminate the incorrect rows:}\)
Row B interchanges the chlorine and bromine reagents.
Row C assigns fluoroborate treatment to iodobenzene formation, although that treatment is associated with fluorobenzene synthesis.
Row D incorrectly uses warm water for chlorobenzene formation and hypophosphorous acid for benzonitrile formation.
Thus, the correct reagent set must be selected according to the desired aromatic substituent rather than treating all nitrogen-replacing reactions as interchangeable.
256. Benzenediazonium chloride is divided into three portions:
P is treated with potassium iodide.
Q is treated with warm water.
R is treated with hypophosphorous acid, \(\mathrm{H_3PO_2}\), under suitable reducing conditions.
Which statement correctly identifies the principal organic products and the fate of the diazonium substituent?
ⓐ. P gives fluorobenzene, Q gives iodobenzene and R gives phenol.
ⓑ. P gives iodobenzene, Q gives phenol and R gives benzene; all three transformations remove the diazonium group with nitrogen evolution.
ⓒ. P gives iodobenzene, Q gives benzonitrile and R gives benzene; only P evolves nitrogen.
ⓓ. P gives phenol, Q gives benzene and R gives iodobenzene; the nitrogen atoms remain attached to the products.
Correct Answer: P gives iodobenzene, Q gives phenol and R gives benzene; all three transformations remove the diazonium group with nitrogen evolution.
Explanation: Benzenediazonium chloride contains a diazonium group attached directly to a benzene ring.
The selected reagent determines which substituent replaces that group.
\(\textbf{Portion P — Iodide substitution:}\)
Potassium iodide supplies iodide ions for replacement of the diazonium functionality.
\[
\mathrm{C_6H_5N_2^+Cl^-+KI\longrightarrow C_6H_5I+N_2+KCl}
\]
The organic product is iodobenzene.
\(\textbf{Portion Q — Hydrolytic substitution:}\)
Warm water converts the diazonium salt into phenol.
\[
\mathrm{C_6H_5N_2^+Cl^-+H_2O\longrightarrow C_6H_5OH+N_2+HCl}
\]
The organic product contains an aromatic hydroxyl group.
\(\textbf{Portion R — Reductive replacement:}\)
Hypophosphorous acid can replace the diazonium group with hydrogen.
The corresponding organic product is benzene.
Nitrogen gas is released as the diazonium substituent is removed.
\(\textbf{Compare the carbon frameworks:}\)
All three organic products retain the original six-carbon aromatic ring.
No additional carbon atom is introduced by these three transformations.
The difference lies in the group occupying the aromatic position previously bonded to the diazonium functionality.
Iodide introduces iodine, water introduces hydroxyl and the reducing reagent introduces hydrogen.
Therefore, three products can be obtained from a common diazonium intermediate without changing its carbon skeleton.
The presence of nitrogen in the starting salt does not imply retention of nitrogen in any of these final organic products.
257. A student proposes two methods for obtaining 4-bromophenol from 4-bromoaniline.
Method P: Diazotise 4-bromoaniline at 273–278 K and subsequently warm the diazonium solution with water.
Method Q: Treat 4-bromoaniline directly with aqueous sodium hydroxide under ordinary conditions and assume that \(\mathrm{-NH_2}\) is replaced by \(\mathrm{-OH}\).
Which statement correctly evaluates the proposed methods?
ⓐ. Both methods are valid because primary aromatic amino groups undergo ordinary hydroxide substitution as readily as diazonium groups.
ⓑ. Method Q is preferable because diazotisation necessarily removes the pre-existing aromatic bromine substituent.
ⓒ. Method P is valid because the amino group can be converted into a diazonium group and then replaced by hydroxyl while the pre-existing para-bromine is retained.
ⓓ. Neither method is valid because a benzene ring bearing bromine cannot contain a hydroxyl group.
Correct Answer: Method P is valid because the amino group can be converted into a diazonium group and then replaced by hydroxyl while the pre-existing para-bromine is retained.
Explanation: The target compound contains bromine and hydroxyl at para positions on a benzene ring.
The starting compound contains bromine and an amino group at those positions.
Therefore, the desired conversion requires replacement of the aromatic amino functionality by hydroxyl while preserving the carbon–bromine bond.
\(\textbf{Method P — Diazotisation:}\)
4-Bromoaniline is a primary aromatic amine.
Its amino group can be converted into a diazonium group using sodium nitrite and hydrochloric acid at 273–278 K.
The diazonium group occupies the same aromatic carbon position previously bearing the amino group.
\(\textbf{Method P — Hydrolysis:}\)
On suitable warming with water, the diazonium group is replaced by hydroxyl with evolution of nitrogen gas.
The bromine atom already attached at the para position remains part of the aromatic structure under the stipulated conditions.
The product is 4-bromophenol.
\(\textbf{Evaluate Method Q:}\)
An aromatic amino group is not an ordinary leaving group under treatment with aqueous sodium hydroxide.
Consequently, directly treating 4-bromoaniline with alkali does not provide the proposed general amino-to-hydroxyl substitution.
The diazonium intermediate is important because nitrogen gas formation makes the diazonium group an effective leaving group.
The conversion therefore depends on changing the original poor leaving group into a chemically suitable intermediate.
The pre-existing bromine substituent does not need to be removed and reintroduced.
The correct route preserves its ring position while transforming the nitrogen-containing substituent.
258. Aniline is converted into benzenediazonium chloride in cold acidic solution.
Two alternative reagents are then considered:
P: \(\mathrm{CuCN/KCN}\)
Q: \(\mathrm{H_3PO_2}\)
The products are subsequently examined for the presence of carbon introduced during the diazonium-substitution step.
Which statement is correct?
ⓐ. Both reactions introduce one additional carbon atom because both replace the diazonium group.
ⓑ. P produces benzonitrile with one additional carbon atom, whereas Q produces benzene without adding carbon.
ⓒ. P produces benzene, whereas Q produces benzonitrile because hypophosphorous acid contains phosphorus.
ⓓ. Neither reaction changes the substituent attached to the aromatic carbon because arenediazonium salts are unreactive toward substitution.
Correct Answer: P produces benzonitrile with one additional carbon atom, whereas Q produces benzene without adding carbon.
Explanation: The same aromatic diazonium intermediate can undergo several different nitrogen-replacing transformations.
The product carbon count depends on the identity of the substituent introduced.
\(\textbf{Pathway P — Cyanide replacement:}\)
Cuprous cyanide under the stipulated conditions replaces the diazonium group by \(\mathrm{-CN}\).
The resulting product is benzonitrile.
\[
\mathrm{C_6H_5N_2^+\xrightarrow{CuCN}C_6H_5CN+N_2}
\]
The carbon atom of the cyanide group becomes directly bonded to the aromatic ring.
Therefore, the organic product contains seven carbon atoms rather than the original six.
\(\textbf{Pathway Q — Hydrogen replacement:}\)
Hypophosphorous acid produces reductive replacement of the diazonium group by hydrogen.
The product is benzene.
The original six-carbon aromatic framework remains intact.
No new carbon atom is introduced by the reducing reagent.
\(\textbf{Carbon-count interpretation:}\)
Both reactions remove the two diazonium nitrogen atoms from the final organic molecule.
However, removing the same leaving group does not require introducing the same replacement group.
Cyanide introduces a carbon-containing substituent, while reductive replacement introduces hydrogen.
Thus, diazonium chemistry can either preserve the carbon count or increase it, depending on the selected reagent.
The difference is important when planning synthesis from aniline because the nitrogen-containing intermediate can act as a route to an aromatic nitrile.
The correct conclusion follows from tracking the atoms introduced by the reagents rather than merely recognising nitrogen-gas evolution.
259. A cold solution of benzenediazonium chloride is prepared from aniline.
The chemist wishes to obtain benzylamine, \(\mathrm{C_6H_5CH_2NH_2}\), without first preparing a benzyl halide.
Which sequence is most appropriate?
ⓐ. Warm with water to form phenol; then treat phenol with ammonia.
ⓑ. Treat with \(\mathrm{H_3PO_2}\) to form benzene; then perform ordinary ammonolysis.
ⓒ. Use \(\mathrm{CuCN/KCN}\) to form benzonitrile, then reduce the nitrile with \(\mathrm{LiAlH_4}\) and work up.
ⓓ. Treat with \(\mathrm{KI}\) to form iodobenzene; then carry out Gabriel synthesis directly on the aryl iodide.
Correct Answer: Use \(\mathrm{CuCN/KCN}\) to form benzonitrile, then reduce the nitrile with \(\mathrm{LiAlH_4}\) and work up.
Explanation: The starting material is an aromatic diazonium salt derived from aniline.
The target is benzylamine, in which the amino nitrogen is separated from the benzene ring by one methylene carbon.
The conversion must therefore introduce one carbon atom and subsequently transform its nitrogen-containing functional group.
\(\textbf{First stage — Introduce the nitrile carbon:}\)
The Sandmeyer cyanation reaction replaces the diazonium group by cyanide.
\[
\mathrm{C_6H_5N_2^+Cl^-\xrightarrow{CuCN/KCN}C_6H_5CN+N_2}
\]
The resulting compound is benzonitrile.
Its nitrile carbon is directly attached to the benzene ring.
\(\textbf{Second stage — Reduce the nitrile:}\)
Lithium aluminium hydride reduces the nitrile group to a primary amino group attached through a methylene carbon.
\[
\mathrm{C_6H_5CN\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5CH_2NH_2}
\]
The product is benzylamine.
\(\textbf{Reject the alternative pathways:}\)
Hydrolysis of benzenediazonium chloride gives phenol, not a carbon-extended primary amine.
Reduction of the diazonium group with hypophosphorous acid gives benzene, which does not introduce the required carbon atom.
Potassium iodide produces iodobenzene, but an ordinary aryl iodide is unsuitable for the normal Gabriel phthalimide substitution.
The successful sequence therefore combines diazonium cyanation with nitrile reduction.
The nitrile carbon becomes the methylene carbon of the target benzylamine.
The amino nitrogen of the final product originates from the cyanide-derived nitrile group rather than remaining attached from the original aniline amino group.
260. An arenediazonium salt is subjected to two different reactions.
Reaction P: Treatment with warm water.
Reaction Q: Coupling with phenol in an appropriate alkaline medium, with the para position relative to hydroxyl initially unoccupied.
Which statement correctly distinguishes the fate of the diazonium nitrogen atoms?
ⓐ. Both reactions retain the diazonium nitrogen atoms in their organic products because nitrogen is strongly bonded in the starting salt.
ⓑ. Reaction P retains an azo linkage, whereas Reaction Q removes nitrogen gas and produces benzene.
ⓒ. Both reactions release nitrogen gas, but only Q produces an aromatic hydroxyl compound.
ⓓ. Reaction P removes the diazonium nitrogen atoms with nitrogen evolution, whereas Reaction Q retains both nitrogen atoms in an azo linkage.
Correct Answer: Reaction P removes the diazonium nitrogen atoms with nitrogen evolution, whereas Reaction Q retains both nitrogen atoms in an azo linkage.
Explanation: Diazonium chemistry includes two broad categories of reactions.
In one category, the diazonium group is displaced with liberation of nitrogen gas.
In the other, the diazo nitrogen atoms are retained in the organic product.
\(\textbf{Reaction P — Hydrolytic displacement:}\)
Warm water replaces the diazonium substituent by hydroxyl.
For benzenediazonium chloride, this produces phenol.
\[
\mathrm{C_6H_5N_2^+Cl^-+H_2O\longrightarrow C_6H_5OH+N_2+HCl}
\]
The two diazonium nitrogen atoms leave together as molecular nitrogen.
The organic product contains no nitrogen introduced from the diazonium group.
\(\textbf{Reaction Q — Azo coupling:}\)
Phenol is an electron-rich aromatic coupling component under appropriate alkaline conditions.
The activated ring reacts with the aromatic diazonium electrophile.
The resulting product contains an azo linkage, \(\mathrm{-N=N-}\), connecting two aromatic portions.
Both diazonium nitrogen atoms are retained within this linkage.
With an unoccupied para position on the phenolic ring, para coupling is ordinarily favoured.
The product contains an extended conjugated system associated with the characteristic colour of many azo compounds.
The difference is therefore not simply whether phenol participates in the reaction.
It is whether the diazonium functionality acts as a leaving group or forms part of the final organic bonding framework.
Recognising this distinction is essential for deciding whether a diazonium transformation forms a substituted aromatic compound or an azo dye.
261. A chemist has a cold solution of 4-methylbenzenediazonium chloride.
Two products are required:
P: 4-Methylbenzonitrile.
Q: 4-Methylphenol.
The chemist must preserve the ring methyl group and avoid changing the positions of the original aromatic substituents.
Which pair of treatments is appropriate?
ⓐ. P: \(\mathrm{CuCN/KCN}\); Q: warm water
ⓑ. P: warm water; Q: \(\mathrm{CuCN/KCN}\)
ⓒ. P: \(\mathrm{KI}\); Q: \(\mathrm{H_3PO_2}\)
ⓓ. P: \(\mathrm{HBF_4,\Delta}\); Q: \(\mathrm{CuBr/HBr}\)
Correct Answer: P: \(\mathrm{CuCN/KCN}\); Q: warm water
Explanation: The starting diazonium salt contains a methyl group and a diazonium group at para positions on the aromatic ring.
The target compounds preserve the methyl group.
Therefore, only the diazonium substituent needs to be changed in each synthesis.
\(\textbf{Preparation of P — Introduction of cyanide:}\)
Cuprous cyanide under suitable cyanation conditions replaces the diazonium group by \(\mathrm{-CN}\).
The carbon of the cyanide group becomes bonded directly to the aromatic ring.
Because the original methyl group remains at the para position, the product is 4-methylbenzonitrile.
The reaction releases nitrogen gas but does not require migration of the pre-existing methyl group.
\(\textbf{Preparation of Q — Introduction of hydroxyl:}\)
Warm water converts the aromatic diazonium group into a hydroxyl group.
The original aromatic methyl substituent remains unchanged under the stipulated conditions.
The product is 4-methylphenol.
\(\textbf{Evaluate the other reagent pairs:}\)
Potassium iodide introduces iodine instead of cyanide.
Hypophosphorous acid replaces the diazonium group with hydrogen rather than hydroxyl.
Fluoroborate formation followed by heating introduces fluorine.
Cuprous bromide in hydrobromic acid introduces bromine.
None of these alternative substitutions gives the requested pair of nitrile and phenolic products.
The successful strategy is to retain the existing aromatic framework while independently selecting the reagent that introduces each target group.
This demonstrates why one arenediazonium intermediate can serve as a common synthetic precursor for several different substituted aromatic compounds.
262. A chemist wishes to prepare chlorobenzene from benzenediazonium chloride using two different methods.
| Method | Reagents used after diazotisation |
|---|
| P | Cuprous chloride and hydrochloric acid |
| Q | Copper powder and hydrochloric acid |
Both reactions are performed under suitable conditions.
Which statement correctly identifies the methods and compares their expected yields according to NCERT?
ⓐ. P is the Gattermann reaction and Q is the Sandmeyer reaction; Q generally gives the better yield.
ⓑ. P is the Sandmeyer reaction and Q is the Gattermann reaction; P generally gives the better yield.
ⓒ. Both are Sandmeyer reactions because hydrochloric acid is used in both methods.
ⓓ. P introduces chlorine, whereas Q introduces hydrogen because copper powder cannot participate in halogen replacement.
Correct Answer: P is the Sandmeyer reaction and Q is the Gattermann reaction; P generally gives the better yield.
Explanation: Benzenediazonium chloride contains a diazonium group that can be replaced by chlorine under appropriate reaction conditions.
The two methods differ in the form of copper used during the substitution.
\(\textbf{Method P — Copper(I)-assisted replacement:}\)
Cuprous chloride supplies copper(I) in the standard chlorine-introducing transformation.
\[
\mathrm{C_6H_5N_2^+Cl^-\xrightarrow{CuCl/HCl}C_6H_5Cl+N_2}
\]
This is a Sandmeyer reaction.
The diazonium group is replaced by chlorine, and molecular nitrogen is liberated.
\(\textbf{Method Q — Copper powder with halogen acid:}\)
In the Gattermann reaction, an arenediazonium salt is treated with copper powder and the corresponding halogen acid.
Copper powder with hydrochloric acid introduces chlorine into the aromatic ring.
The organic product is again chlorobenzene.
The two processes should not be distinguished solely by whether hydrochloric acid is present, because both conditions may involve that acid.
The decisive distinction is the use of a copper(I) salt in the Sandmeyer reaction versus copper powder with a halogen acid in the Gattermann reaction.
NCERT states that the Sandmeyer reaction generally provides better yields than the corresponding Gattermann reaction.
This is a comparative observation rather than a claim that Gattermann halogenation cannot occur.
Both reactions exploit the favourable displacement of the diazonium group with nitrogen-gas evolution.
The correct choice therefore requires identifying the copper reagent, recognising the common product and applying the stated yield comparison.
263. The following conversion is proposed:
\[
\mathrm{4\!-\!Chloroaniline\xrightarrow{NaNO_2/HCl,\ 273-278\,K}P
\xrightarrow{HBF_4}Q
\xrightarrow{NaNO_2(aq),\ Cu,\ heat}R}
\]
Assume that the pre-existing aromatic C–Cl bond remains unchanged throughout the sequence.
Which statement correctly identifies P, Q and R?
ⓐ. P is 4-chlorobenzenediazonium chloride; Q is its tetrafluoroborate salt; R is 1-chloro-4-fluorobenzene.
ⓑ. P is 4-chlorobenzenediazonium chloride; Q is 1-chloro-4-fluorobenzene; R is 4-chlorophenol.
ⓒ. P is 4-chloronitrobenzene; Q is its tetrafluoroborate salt; R is 4-chloroaniline.
ⓓ. P is 4-chlorobenzenediazonium chloride; Q is its tetrafluoroborate salt; R is 1-chloro-4-nitrobenzene.
Correct Answer: P is 4-chlorobenzenediazonium chloride; Q is its tetrafluoroborate salt; R is 1-chloro-4-nitrobenzene.
Explanation: The starting compound is a primary aromatic amine bearing chlorine para to the amino group.
The sequence converts the amino functionality into a diazonium group and then replaces that group with nitro.
The chlorine substituent is stipulated to remain unchanged.
\(\textbf{Formation of P — Diazotisation:}\)
Sodium nitrite and hydrochloric acid generate nitrous acid in the reaction mixture.
At 273–278 K, the primary aromatic amino group forms an arenediazonium salt.
P is therefore 4-chlorobenzenediazonium chloride.
The diazonium group occupies the aromatic position formerly bearing \(\mathrm{-NH_2}\).
\(\textbf{Formation of Q — Counterion conversion:}\)
Treatment with fluoroboric acid produces the corresponding arenediazonium tetrafluoroborate.
\[
\mathrm{ArN_2^+Cl^-+HBF_4\longrightarrow ArN_2^+BF_4^-+HCl}
\]
Here, Ar represents the 4-chlorophenyl group.
The tetrafluoroborate counterion does not itself mean that fluorine has already replaced the diazonium group on the ring.
Q remains a diazonium salt.
\(\textbf{Formation of R — Nitro-group replacement:}\)
According to NCERT, heating an arenediazonium tetrafluoroborate with aqueous sodium nitrite in the presence of copper can replace the diazonium group with \(\mathrm{-NO_2}\).
Therefore, the final aromatic position acquires a nitro group.
Because chlorine remains para to that position, R is 1-chloro-4-nitrobenzene.
Fluorobenzene formation would instead require the appropriate thermal decomposition of the tetrafluoroborate through the fluorination pathway.
The identity of the final reagent and conditions, not merely the intermediate counterion, determines the replacement product.
The route therefore demonstrates how one diazonium tetrafluoroborate intermediate can participate in chemically different transformations.
264. A cold solution of benzenediazonium chloride is treated with ethanol under suitable reducing conditions.
The reaction is represented as:
\[
\mathrm{C_6H_5N_2^+Cl^-+CH_3CH_2OH\longrightarrow P+Q+N_2+HCl}
\]
Which pair correctly identifies the principal organic products P and Q?
ⓐ. P = Phenol; Q = ethane
ⓑ. P = Chlorobenzene; Q = ethanoic acid
ⓒ. P = Benzene; Q = ethanal
ⓓ. P = Nitrobenzene; Q = methanal
Correct Answer: P = Benzene; Q = ethanal
Explanation: Benzenediazonium chloride can undergo replacement of its diazonium group by hydrogen.
NCERT identifies ethanol as one of the mild reducing agents capable of bringing about this transformation.
The reducing agent is itself oxidised during the reaction.
\(\textbf{Transformation of the diazonium component:}\)
The diazonium group is removed from the aromatic carbon.
That position acquires hydrogen, producing benzene.
The two diazonium nitrogen atoms leave as molecular nitrogen.
Therefore, P is benzene.
\(\textbf{Transformation of ethanol:}\)
Ethanol acts as the reducing agent rather than serving only as an inert solvent.
It is oxidised to ethanal, which contains an aldehyde group.
Therefore, Q is ethanal.
The overall transformation can be represented by:
\[
\mathrm{C_6H_5N_2^+Cl^-+CH_3CH_2OH\longrightarrow C_6H_6+CH_3CHO+N_2+HCl}
\]
\(\textbf{Atom-balance verification:}\)
The benzene ring retains all six original carbon atoms.
The two carbon atoms of ethanol remain together in ethanal.
The diazonium nitrogen atoms are released as nitrogen gas.
The hydrogen transfer is consistent with reduction of the aromatic diazonium functionality and oxidation of ethanol.
Phenol would arise through hydrolytic hydroxyl replacement rather than the specified reducing pathway.
Nitrobenzene would require introduction of a nitro group rather than hydrogen.
The distinction illustrates why the reagent's chemical role must be considered when predicting diazonium decomposition products.
Ethanol cannot automatically be treated as an inert medium whenever it appears in an organic reaction.
265. Starting from aniline, a student wishes to prepare 1,3,5-tribromobenzene without using a pre-existing polybrominated benzene.
The following operations are available:
P: Bromination with bromine water.
Q: Diazotisation with sodium nitrite and hydrochloric acid at 273–278 K.
R: Reduction of the diazonium group to hydrogen using hypophosphorous acid.
Which sequence gives the target compound through the standard expected transformations?
ⓐ. Q → R → P
ⓑ. P → Q → R
ⓒ. Q → P → R
ⓓ. R → P → Q
Correct Answer: P → Q → R
Explanation: Aniline strongly activates its aromatic ring through resonance donation from the free amino group.
Bromine water therefore produces extensive ring bromination under the standard NCERT conditions.
\(\textbf{First operation — Establish the three bromine positions:}\)
\[
\mathrm{C_6H_5NH_2+3Br_2\longrightarrow 2,4,6\!-\!Br_3C_6H_2NH_2+3HBr}
\]
The product is 2,4,6-tribromoaniline.
The bromine substituents occupy both ortho positions and the para position relative to the amino group.
\(\textbf{Second operation — Convert the amino group into a leaving group:}\)
Diazotisation at 273–278 K converts the remaining primary aromatic amino group into a diazonium group.
The three aromatic C–Br bonds remain in place under the stipulated conditions.
\(\textbf{Third operation — Remove the nitrogen-containing substituent:}\)
Hypophosphorous acid replaces the diazonium group with hydrogen.
Molecular nitrogen is liberated.
The original carbon bearing the amino group is therefore restored to a carbon bearing hydrogen.
\(\textbf{Determine the final substitution pattern:}\)
The three bromine atoms were originally at positions 2, 4 and 6 relative to the amino group.
After removal of the amino-derived substituent, they occupy alternating positions around the ring.
Renumbering the final molecule gives 1,3,5-tribromobenzene.
Reversing the order would not reproduce the same chemistry.
For example, removing the amino group first produces benzene, whose subsequent bromination is not equivalent to the strongly activating bromination of aniline.
The route therefore depends on installing the ring substituents while the amino group directs substitution, then removing that directing group through diazonium chemistry.
This is a synthetic use of a temporary functional group rather than a simple substitution of an existing aryl bromide.
266. Nitrobenzene is subjected to the following sequence:
\[
\mathrm{Nitrobenzene
\xrightarrow{Br_2/FeBr_3}P
\xrightarrow{Sn/HCl,\ then\ NaOH}Q
\xrightarrow{NaNO_2/HCl,\ 273-278\,K}R
\xrightarrow{HBF_4,\ then\ heat}S}
\]
Assume each transformation proceeds through its standard principal product without changing pre-existing aromatic carbon–bromine bonds.
Which compound is S?
ⓐ. 1-Bromo-2-fluorobenzene
ⓑ. 1-Bromo-4-fluorobenzene
ⓒ. 3-Bromoaniline
ⓓ. 1-Bromo-3-fluorobenzene
Correct Answer: 1-Bromo-3-fluorobenzene
Explanation: The sequence combines aromatic directing effects, nitro-group reduction and diazonium-based fluorination.
The final ring substitution pattern must be traced from the first electrophilic substitution.
\(\textbf{Stage 1 — Bromination of nitrobenzene:}\)
The nitro group is strongly electron withdrawing and meta directing.
Therefore, electrophilic bromination of nitrobenzene principally introduces bromine at the meta position.
P is 3-bromonitrobenzene.
\(\textbf{Stage 2 — Conversion of nitro to amino:}\)
Tin and hydrochloric acid reduce the nitro group to an amino-derived salt.
Alkaline work-up liberates the free aromatic amine.
The bromine substituent remains attached to the aromatic ring.
Q is therefore 3-bromoaniline.
\(\textbf{Stage 3 — Formation of the aromatic diazonium salt:}\)
The primary aromatic amino group undergoes diazotisation with sodium nitrite and hydrochloric acid at 273–278 K.
R is 3-bromobenzenediazonium chloride.
The new diazonium group occupies the same aromatic position as the original amino group.
\(\textbf{Stage 4 — Introduction of fluorine:}\)
Fluoroboric acid converts R into the corresponding diazonium tetrafluoroborate.
On heating, this intermediate undergoes the Balz–Schiemann transformation.
The diazonium group is replaced by fluorine with evolution of nitrogen.
The final bromine and fluorine substituents retain the meta relationship established earlier.
Therefore, S is 1-bromo-3-fluorobenzene.
The other fluorinated positional isomers would require a different aromatic substitution pattern before diazotisation.
The essential reasoning is that diazonium replacement changes the identity of the substituent but does not relocate the aromatic carbon to which it is attached.
267. A chemist wishes to synthesise 4-bromobenzoic acid from 4-bromoaniline through a diazonium intermediate.
The following reagents are available:
P: \(\mathrm{NaNO_2/HCl}\) at 273–278 K.
Q: \(\mathrm{CuCN}\) under Sandmeyer conditions.
R: Suitable aqueous hydrolysis of a nitrile, followed by acidification.
Which sequence is appropriate, and what is the source of the new carboxyl carbon?
ⓐ. P → Q → R; the carboxyl carbon originates from cyanide introduced during the Sandmeyer reaction.
ⓑ. P → R → Q; the carboxyl carbon originates from the original amino nitrogen.
ⓒ. Q → P → R; the carboxyl carbon originates from the aromatic bromine substituent.
ⓓ. P → Q → R; the carboxyl carbon originates from the benzene-ring carbon formerly bonded to nitrogen.
Correct Answer: P → Q → R; the carboxyl carbon originates from cyanide introduced during the Sandmeyer reaction.
Explanation: The target contains a carboxylic acid group at the aromatic position originally bearing the amino group.
The para-bromine substituent must be preserved.
This requires introducing a carbon-containing functional group through the diazonium intermediate.
\(\textbf{Diazotisation of the starting amine:}\)
4-Bromoaniline reacts with nitrous acid generated from sodium nitrite and hydrochloric acid at 273–278 K.
The primary aromatic amino group becomes a diazonium group.
\(\textbf{Sandmeyer cyanation:}\)
Cuprous cyanide replaces the diazonium group with \(\mathrm{-CN}\).
The product is 4-bromobenzonitrile.
The cyanide carbon becomes directly bonded to the aromatic ring.
Molecular nitrogen is liberated during the substitution.
\(\textbf{Hydrolysis of the nitrile:}\)
Under suitable hydrolytic conditions, the nitrile group is converted into a carboxylic acid group.
After acidification, the organic product is 4-bromobenzoic acid.
The bromine atom remains para to the newly formed carboxyl group.
\(\textbf{Track the additional carbon atom:}\)
The starting 4-bromoaniline contains six carbon atoms.
The final 4-bromobenzoic acid contains seven carbon atoms.
The additional carbon was introduced through the cyanide group in the Sandmeyer reaction.
It subsequently becomes the carbonyl carbon of the carboxylic acid group.
The original amino nitrogen does not become the carboxyl carbon.
Similarly, the aromatic carbon formerly attached to the diazonium group remains part of the benzene ring.
The route therefore uses diazonium substitution to introduce a new carbon atom, followed by functional-group conversion without disturbing the desired ring substitution pattern.
268. Benzenediazonium chloride is coupled separately with phenol and 4-methylphenol under suitable alkaline conditions.
In both cases, assume ordinary electrophilic aromatic coupling and that the activated aromatic positions remain available except where already occupied by substituents.
Which statement correctly predicts the preferred coupling positions?
ⓐ. Coupling with phenol occurs predominantly at an ortho position, while coupling with 4-methylphenol occurs predominantly at the para position.
ⓑ. Both coupling reactions must occur at the para position because hydroxyl is always para directing regardless of existing substituents.
ⓒ. Phenol generally couples at its available para position, whereas 4-methylphenol can couple at an ortho position because its para position is occupied by methyl.
ⓓ. Neither phenol nor 4-methylphenol can undergo azo coupling because both lack amino nitrogen.
Correct Answer: Phenol generally couples at its available para position, whereas 4-methylphenol can couple at an ortho position because its para position is occupied by methyl.
Explanation: Azo coupling is an electrophilic aromatic substitution reaction involving an aromatic diazonium species and an activated aromatic compound.
Phenol is an effective coupling component because its hydroxyl group donates electron density into the benzene ring.
This increases reactivity particularly at the ortho and para positions.
\(\textbf{Coupling with unsubstituted phenol:}\)
The para position relative to the hydroxyl group is initially unoccupied.
Under suitable alkaline coupling conditions, this position is ordinarily favoured.
The resulting compound contains a phenolic ring connected to the diazonium-derived phenyl group by an azo linkage.
The product is commonly represented as p-hydroxyazobenzene.
\(\textbf{Coupling with 4-methylphenol:}\)
In 4-methylphenol, the para position relative to hydroxyl is already occupied by the methyl group.
Coupling cannot place an additional substituent at that same occupied aromatic position without a different displacement process.
The activated positions ortho to hydroxyl remain available.
The two ortho positions are symmetry equivalent in the starting 4-methylphenol molecule.
Consequently, ordinary ortho coupling produces a structure represented as 2-(phenyldiazenyl)-4-methylphenol.
\(\textbf{Nitrogen retention:}\)
In both reactions, the two nitrogen atoms of the diazonium group remain in the azo linkage.
They do not leave as molecular nitrogen.
The different coupling positions arise from the availability of activated aromatic carbon atoms rather than from any change in the nitrogen-retention mechanism.
The comparison demonstrates why an ortho/para-directing group does not guarantee para substitution when that position is already occupied.
269. A cold solution of benzenediazonium chloride is divided into two portions.
Portion P is allowed to react with aniline under appropriately controlled, mildly acidic coupling conditions in which sufficient neutral aniline is present.
Portion Q is treated with aniline in a strongly acidic medium where the aromatic amino group is predominantly protonated.
Which statement best predicts the relative tendency for ordinary azo coupling?
ⓐ. Q should couple more readily because protonated aniline donates nitrogen lone-pair electron density more strongly into the ring.
ⓑ. P is more favourable for ordinary coupling because neutral aniline activates its aromatic ring, whereas extensive protonation suppresses that activation in Q.
ⓒ. Both portions must produce identical coupling rates because their aromatic carbon frameworks are unchanged.
ⓓ. Q must give an isocyanide instead of an azo compound because strongly acidic conditions convert a secondary amine into a primary amine.
Correct Answer: P is more favourable for ordinary coupling because neutral aniline activates its aromatic ring, whereas extensive protonation suppresses that activation in Q.
Explanation: Aromatic diazonium salts can undergo azo coupling with suitably activated aromatic compounds.
Aniline is an effective coupling component when its aromatic ring possesses sufficient electron density.
The free amino group donates electron density into the benzene ring through resonance.
This increases the electron density particularly at the ortho and para positions.
\(\textbf{Portion P — Controlled coupling conditions:}\)
Under suitable conditions, a significant fraction of aniline remains in its neutral amino form.
The nitrogen lone pair can contribute to resonance activation of the ring.
The aromatic ring can therefore react with the diazonium electrophile.
With an available para position, the ordinary coupling product is p-aminoazobenzene.
The reaction retains both diazonium nitrogen atoms in an azo linkage.
\(\textbf{Portion Q — Strongly acidic conditions:}\)
Strong acid protonates the amino nitrogen to form anilinium ion.
The nitrogen lone pair is no longer available for its original resonance donation into the aromatic ring.
The protonated substituent is substantially less activating.
Consequently, the aromatic ring is less favourable for ordinary electrophilic azo coupling.
This does not imply that aniline becomes a secondary or tertiary amine.
Its nitrogen substitution pattern has not changed; only its protonation state has.
\(\textbf{Reaction-condition conclusion:}\)
Azo coupling cannot be predicted solely from the presence of a benzene ring and a diazonium salt.
The electronic state of the coupling component and the acidity of the medium must also be considered.
Therefore, the controlled conditions of P are more favourable than the strongly protonating conditions of Q.
270. Benzenediazonium chloride is reacted with N,N-dimethylaniline under suitable azo-coupling conditions.
The para position of the N,N-dimethylamino-substituted ring is initially unoccupied.
A student predicts that no azo compound can form because N,N-dimethylaniline has no N–H bond.
Which statement correctly evaluates this prediction?
ⓐ. The prediction is correct because the diazonium group must replace an N–H hydrogen during azo coupling.
ⓑ. The prediction is correct because tertiary aromatic amines cannot activate their benzene rings.
ⓒ. The prediction is incorrect because azo coupling necessarily converts the tertiary amino nitrogen into a primary amino group.
ⓓ. The prediction is incorrect because coupling occurs at an activated aromatic carbon, allowing an azo linkage to form without replacing an N–H hydrogen.
Correct Answer: The prediction is incorrect because coupling occurs at an activated aromatic carbon, allowing an azo linkage to form without replacing an N–H hydrogen.
Explanation: N,N-Dimethylaniline is a tertiary aromatic amine.
Its nitrogen is bonded to one phenyl group and two methyl groups.
It therefore lacks an N–H bond.
However, the neutral nitrogen possesses a lone pair that can interact with the aromatic pi-electron system.
This resonance donation activates the ring toward suitable electrophilic aromatic substitution.
\(\textbf{Nature of azo coupling:}\)
An aromatic diazonium species acts as an electrophilic coupling partner.
The activated aromatic carbon of the coupling component participates in formation of the new bond.
The diazonium-derived nitrogen atoms remain in an azo linkage connecting the two aromatic systems.
The process does not require replacement of a hydrogen directly attached to the tertiary amino nitrogen.
\(\textbf{Regioselectivity:}\)
The N,N-dimethylamino group is strongly ortho/para directing when present in its appropriate neutral form.
With the para position initially unoccupied, para coupling is ordinarily favoured under suitable conditions.
The resulting product is a para-azo-substituted N,N-dimethylaniline derivative.
\(\textbf{Distinguish different nitrogen reactions:}\)
Ordinary N-acylation of a tertiary amine is restricted by the absence of an N–H bond.
The carbylamine test also does not give the normal positive result for a tertiary amine.
Neither fact prevents electrophilic aromatic coupling at an activated ring carbon.
The student has incorrectly transferred the structural requirement of an N–H-dependent reaction to a different reaction mechanism.
The correct interpretation requires identifying which atom actually participates in new bond formation during azo coupling.
271. Benzene-1,4-diamine is converted completely into its bis(diazonium) salt under carefully controlled cold conditions.
The resulting intermediate is reacted with two equivalents of phenol under conditions that produce complete azo coupling at the para position of each phenolic ring.
Assume both coupling reactions proceed independently and no side reactions occur.
Which statement correctly describes the principal product?
ⓐ. It contains one azo linkage and two nitrogen atoms because one diazonium group must leave as nitrogen gas.
ⓑ. It contains two azo linkages and four nitrogen atoms retained from the original two diazonium groups.
ⓒ. It contains two nitro groups because phenol oxidises diazonium nitrogen during coupling.
ⓓ. It contains no nitrogen because both diazonium groups are displaced by phenolic hydroxyl groups.
Correct Answer: It contains two azo linkages and four nitrogen atoms retained from the original two diazonium groups.
Explanation: Benzene-1,4-diamine contains two primary aromatic amino groups.
The groups are attached to different aromatic carbon atoms at para positions.
Under the stipulated complete diazotisation conditions, both groups become diazonium functionalities.
The intermediate therefore contains two separate diazonium groups attached to the same central aromatic ring.
\(\textbf{First coupling event:}\)
One diazonium group reacts with an activated phenol ring.
The phenol ring couples at its available para position under the specified conditions.
The two nitrogen atoms of that diazonium group become part of an azo linkage.
No molecular nitrogen is liberated from this coupling event.
\(\textbf{Second coupling event:}\)
The remaining diazonium group reacts independently with another phenol molecule.
A second azo linkage is formed.
Again, both diazonium nitrogen atoms are retained in the organic product.
\(\textbf{Count nitrogen atoms and azo linkages:}\)
Each diazonium group contributes two nitrogen atoms.
With two such groups, the final coupled molecule contains four diazonium-derived nitrogen atoms.
These form two separate \(\mathrm{-N=N-}\) linkages.
The product contains a central aromatic ring connected through azo linkages to two phenolic aromatic rings.
The extended conjugation is consistent with the structural characteristics of azo dyes.
The result differs fundamentally from warming the bis(diazonium) salt with water, which would replace the diazonium groups by hydroxyl and release nitrogen gas.
The correct prediction therefore requires identifying the reaction as azo coupling and accounting independently for both nitrogen-containing groups.
272. Three portions of benzenediazonium chloride are handled as follows:
P: The freshly prepared aqueous solution is maintained at 273–278 K and used promptly.
Q: Benzenediazonium chloride is isolated in the dry state and kept under ordinary laboratory storage conditions.
R: Benzenediazonium chloride is converted into the corresponding tetrafluoroborate salt, which is isolated under suitable conditions.
Which statement agrees with the NCERT description of diazonium-salt stability?
ⓐ. Q is the most suitable storage form because removal of water makes benzenediazonium chloride indefinitely stable.
ⓑ. P is usable briefly in cold solution; Q is unsafe as a dry diazonium chloride; R is comparatively stable as tetrafluoroborate.
ⓒ. P must immediately release nitrogen at 273–278 K, whereas Q and R remain equally stable in the dry state.
ⓓ. All three preparations have identical stability because they contain the same benzenediazonium cation.
Correct Answer: P is usable briefly in cold solution; Q is unsafe as a dry diazonium chloride; R is comparatively stable as tetrafluoroborate.
Explanation: The chemical usefulness of aromatic diazonium salts depends strongly on their preparation and handling conditions.
Primary aromatic amines form arenediazonium salts that are comparatively stable for a short time in cold solution.
NCERT gives 273–278 K as the standard temperature range for preparation of benzenediazonium chloride from aniline.
The low temperature helps preserve the diazonium intermediate for subsequent transformations.
\(\textbf{Portion P — Fresh cold aqueous solution:}\)
Benzenediazonium chloride is soluble in water and is sufficiently stable in cold solution for appropriate immediate use.
It should not be regarded as a permanently stable aqueous compound.
On suitable warming, it can undergo hydrolysis and related decomposition reactions.
\(\textbf{Portion Q — Dry benzenediazonium chloride:}\)
NCERT states that benzenediazonium chloride decomposes easily in the dry state.
Ordinary isolation and storage of the dry chloride should therefore not be treated as equivalent to maintaining a freshly prepared cold solution.
The instability of the dry salt is an important practical qualification.
\(\textbf{Portion R — Diazonium tetrafluoroborate:}\)
The corresponding benzenediazonium tetrafluoroborate is insoluble in water and comparatively stable at room temperature.
This permits its isolation under suitable conditions.
However, it can still undergo useful decomposition when heated appropriately, as in aryl fluoride synthesis.
The identity of the counterion and the physical conditions both influence diazonium-salt behaviour.
Thus, equal organic cations do not guarantee identical practical stability for all counterions and physical states.
The correct comparison distinguishes temporary cold-solution stability, dry-state instability and the special usefulness of the tetrafluoroborate salt.
273. The two nitrogen atoms of benzenediazonium chloride are imagined to be labelled with the stable isotope \(^{15}\mathrm{N}\), while the nitrogen atom supplied by CuCN has the ordinary isotope \(^{14}\mathrm{N}\).
The labelled diazonium salt is converted into benzonitrile using CuCN under Sandmeyer conditions.
The resulting nitrile is subsequently reduced completely to benzylamine using \(\mathrm{LiAlH_4}\).
Assume that no nitrogen-isotope exchange occurs.
Which statement correctly tracks the nitrogen atoms?
ⓐ. The final benzylamine contains \(^{15}\mathrm{N}\) because its nitrogen must originate from the original aniline amino group.
ⓑ. Both diazonium nitrogen atoms remain in benzonitrile, while the cyanide nitrogen escapes as molecular nitrogen.
ⓒ. The diazonium nitrogen atoms leave as labelled nitrogen gas; the final benzylamine contains \(^{14}\mathrm{N}\) derived from cyanide.
ⓓ. The final benzylamine contains no nitrogen because lithium aluminium hydride removes the nitrile nitrogen during reduction.
Correct Answer: The diazonium nitrogen atoms leave as labelled nitrogen gas; the final benzylamine contains \(^{14}\mathrm{N}\) derived from cyanide.
Explanation: Nitrogen atoms must be tracked through two chemically different transformations.
The first is a Sandmeyer reaction involving displacement of an aromatic diazonium group.
The second is reduction of a nitrile into a primary amine.
\(\textbf{Sandmeyer cyanation:}\)
The diazonium group is replaced by a cyano group supplied by CuCN.
The two diazonium nitrogen atoms leave together as molecular nitrogen.
Because these atoms are labelled with \(^{15}\mathrm{N}\), the evolved nitrogen gas contains the labelled atoms.
The nitrogen atom incorporated into the benzonitrile group comes from the cyanide reagent.
Under the stipulated conditions, that nitrogen is \(^{14}\mathrm{N}\).
\(\textbf{Structure of the nitrile intermediate:}\)
The product is benzonitrile, \(\mathrm{C_6H_5C\equiv N}\).
Its nitrile carbon is directly attached to the aromatic ring.
Its nitrile nitrogen is the nitrogen introduced with cyanide.
\(\textbf{Reduction to benzylamine:}\)
Lithium aluminium hydride reduces the carbon–nitrogen triple bond while retaining the nitrile nitrogen within the organic product.
\[
\mathrm{C_6H_5C\equiv N\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5CH_2NH_2}
\]
The nitrile carbon becomes the benzylic methylene carbon.
The nitrile nitrogen becomes the amino nitrogen of benzylamine.
Therefore, the final benzylamine contains \(^{14}\mathrm{N}\), not \(^{15}\mathrm{N}\).
This result demonstrates that nitrogen appearing in a final amine need not originate from the nitrogen-containing functional group of the original aromatic starting material.
The Sandmeyer step discards the original diazonium nitrogen atoms, while the nitrile-reduction step preserves the newly introduced cyanide nitrogen.
274. Two arenediazonium chloride solutions are prepared:
P: Benzenediazonium chloride.
Q: 4-Methylbenzenediazonium chloride.
P is treated with cuprous bromide and hydrobromic acid.
Q is treated with copper powder and hydrobromic acid.
Which statement correctly identifies the principal products and explains why the chloride counterion does not force chlorine substitution?
ⓐ. P gives chlorobenzene and Q gives 4-chlorotoluene because both starting salts contain chloride.
ⓑ. P gives bromobenzene through a Sandmeyer reaction, while Q gives 4-bromotoluene through a Gattermann reaction.
ⓒ. P gives benzene and Q gives toluene because both copper reagents remove nitrogen without introducing halogen.
ⓓ. P gives bromobenzene, while Q must remain unchanged because Gattermann halogenation requires cuprous bromide rather than copper powder.
Correct Answer: P gives bromobenzene through a Sandmeyer reaction, while Q gives 4-bromotoluene through a Gattermann reaction.
Explanation: Both starting compounds are arenediazonium chlorides, but their subsequent replacement reactions use bromine-introducing conditions.
The chloride counterion is part of the initial ionic salt.
It does not automatically determine the substituent that must replace the diazonium group in every later transformation.
\(\textbf{Reaction of P — Sandmeyer bromination:}\)
Cuprous bromide in the presence of hydrobromic acid provides the appropriate conditions for replacement of the diazonium group by bromine.
The product is bromobenzene.
Molecular nitrogen is liberated as the diazonium group leaves.
\(\textbf{Reaction of Q — Gattermann bromination:}\)
Copper powder and hydrobromic acid can introduce bromine through the corresponding Gattermann transformation.
The original methyl substituent remains attached at its para position under the stipulated conditions.
The resulting product is 4-bromotoluene.
\(\textbf{Compare the two copper systems:}\)
The Sandmeyer method uses an appropriate copper(I) salt.
The Gattermann method uses copper powder with the corresponding halogen acid.
Both methods can introduce bromine into the aromatic position originally occupied by the diazonium group.
Neither necessarily incorporates the chloride counterion from the starting salt.
The distinction illustrates why reagent selection is more important than the original diazonium counterion when predicting the final aromatic substituent.
It also preserves the difference between substitution of the diazonium group and displacement of an existing aromatic carbon–chlorine bond.
The correct interpretation requires identifying both named methods and conserving the original ring methyl substituent.
275. A freshly prepared cold solution contains \(0.100\,\mathrm{mol}\) of benzenediazonium chloride.
Exactly \(0.040\,\mathrm{mol}\) of phenol is added under suitable alkaline azo-coupling conditions.
Assume phenol couples quantitatively with an equal amount of diazonium salt to produce one mole of azo compound per mole of phenol.
The remaining unreacted diazonium salt is then warmed sufficiently with water to undergo quantitative hydrolysis to phenol with nitrogen evolution.
All evolved nitrogen is collected at STP.
Given molar volume at STP \(=22.4\,\mathrm{L\,mol^{-1}}\).
What are the amount of azo compound formed and the volume of nitrogen gas evolved, respectively?
ⓐ. \(0.040\,\mathrm{mol}\) and \(1.344\,\mathrm{L}\)
ⓑ. \(0.040\,\mathrm{mol}\) and \(2.240\,\mathrm{L}\)
ⓒ. \(0.060\,\mathrm{mol}\) and \(1.344\,\mathrm{L}\)
ⓓ. \(0.100\,\mathrm{mol}\) and \(2.240\,\mathrm{L}\)
Correct Answer: \(0.040\,\mathrm{mol}\) and \(1.344\,\mathrm{L}\)
Explanation: The diazonium salt participates in two different reaction classes.
The first reaction is azo coupling, which retains the diazonium nitrogen atoms in the organic product.
The second reaction is hydrolysis, which removes the diazonium group and releases nitrogen gas.
The two portions must therefore be accounted for separately.
\(\textbf{Initial diazonium amount:}\)
\[
n_{\mathrm{diazonium,initial}}=0.100\,\mathrm{mol}
\]
\(\textbf{Stage 1 — Phenol coupling:}\)
Under the stated conditions, one mole of phenol reacts with one mole of diazonium salt.
The available phenol is:
\[
n_{\mathrm{phenol}}=0.040\,\mathrm{mol}
\]
Therefore:
\[
n_{\mathrm{azo\ compound}}=0.040\,\mathrm{mol}
\]
The amount of diazonium salt consumed in coupling is also:
\[
n_{\mathrm{diazonium,coupling}}=0.040\,\mathrm{mol}
\]
No molecular nitrogen is evolved during this idealised coupling stage.
The two diazonium nitrogen atoms remain in each azo product molecule.
\(\textbf{Unreacted diazonium salt:}\)
\[
n_{\mathrm{diazonium,remaining}}=0.100-0.040
\]
\[
=0.060\,\mathrm{mol}
\]
\(\textbf{Stage 2 — Hydrolysis with nitrogen evolution:}\)
\[
\mathrm{C_6H_5N_2^+Cl^-+H_2O\longrightarrow C_6H_5OH+N_2+HCl}
\]
One mole of hydrolysed diazonium salt gives one mole of nitrogen gas.
\[
n_{\mathrm{N_2}}=0.060\,\mathrm{mol}
\]
\(\textbf{Gas volume at STP:}\)
\[
V_{\mathrm{N_2}}=n_{\mathrm{N_2}}\times V_m
\]
\[
=0.060\times22.4
\]
\[
=1.344\,\mathrm{L}
\]
\(\textbf{Nitrogen-conservation check:}\)
The coupled portion retains its diazonium-derived nitrogen in azo linkages.
Only the portion subsequently hydrolysed contributes molecular nitrogen gas.
Calculating nitrogen volume from the entire initial diazonium amount would incorrectly treat azo coupling as a nitrogen-eliminating reaction.
\(\textbf{Final answer:}\)
\[
\boxed{\left(n_{\mathrm{azo\ compound}},V_{\mathrm{N_2}}\right)=\left(0.040\,\mathrm{mol},\ 1.344\,\mathrm{L}\right)}
\]
276. A chemist wishes to prepare 3-nitrotoluene as the principal product from an aromatic amine.
The available starting compound is 3-methylaniline.
Two proposed routes are:
Route P: Direct nitration of toluene using concentrated nitric and sulfuric acids.
Route Q: Diazotisation of 3-methylaniline at 273–278 K, conversion into the corresponding diazonium tetrafluoroborate, followed by treatment with aqueous sodium nitrite and copper under the NCERT nitro-replacement conditions.
Which statement correctly evaluates the routes?
ⓐ. Route P preferentially forms 3-nitrotoluene because methyl is a meta-directing group; Route Q introduces nitro at an unpredictable aromatic position.
ⓑ. Both routes necessarily give 3-nitrotoluene as the only product because they begin with aromatic compounds containing seven carbon atoms.
ⓒ. Route P ordinarily favours ortho- and para-nitrotoluene, whereas Route Q can introduce nitro at the original amino-bearing position to give 3-nitrotoluene.
ⓓ. Route Q produces 3-fluorotoluene because the presence of a tetrafluoroborate intermediate always requires fluoride replacement.
Correct Answer: Route P ordinarily favours ortho- and para-nitrotoluene, whereas Route Q can introduce nitro at the original amino-bearing position to give 3-nitrotoluene.
Explanation: The target compound contains a methyl group and a nitro group in a meta relationship.
The two routes use different principles for determining where the nitro group enters the aromatic ring.
\(\textbf{Route P — Direct nitration of toluene:}\)
The methyl group is electron releasing and activates the benzene ring toward electrophilic substitution.
It is an ortho/para-directing substituent.
Consequently, ordinary direct nitration of toluene favours the ortho and para products rather than selectively producing 3-nitrotoluene.
The desired meta isomer is therefore not the principal expected product of this route.
\(\textbf{Route Q — Preserve an existing substitution pattern:}\)
3-Methylaniline already contains methyl and amino groups at meta positions.
Diazotisation converts the primary aromatic amino group into a diazonium group.
The methyl substituent remains attached to its original aromatic carbon.
\(\textbf{Formation of the tetrafluoroborate intermediate:}\)
Treatment with fluoroboric acid converts the diazonium chloride into the corresponding diazonium tetrafluoroborate.
The diazonium group remains attached to the carbon previously bearing the amino group.
\(\textbf{Introduction of nitro:}\)
Under the specified NCERT conditions involving aqueous sodium nitrite and copper, the diazonium group is replaced by \(\mathrm{-NO_2}\).
Therefore, the new nitro substituent occupies exactly the original amino-bearing position.
Because that position is meta to the existing methyl group, the resulting product is 3-nitrotoluene.
The tetrafluoroborate intermediate does not force fluoride substitution when different, explicitly specified replacement conditions are used.
This route is advantageous because the required positional relationship was already established in the starting aromatic amine.
The central synthetic principle is to replace a pre-positioned diazonium group rather than rely on direct electrophilic nitration to create an unfavoured substitution pattern.
277. Two hypothetical arenediazonium salt samples have the following compositions:
P: \(\mathrm{C_6H_5N_2^+HSO_4^-}\)
Q: \(\mathrm{(C_6H_5N_2^+)_2SO_4^{2-}}\)
Each sample contains \(0.025\,\mathrm{mol}\) of the indicated salt formula units.
Both samples are separately subjected to complete hydrolytic decomposition under conditions that replace every aromatic diazonium group with hydroxyl and liberate one molecule of nitrogen per diazonium group.
Assume quantitative reactions and a molar gas volume of \(22.4\,\mathrm{L\,mol^{-1}}\) at STP.
Which option gives the nitrogen volumes evolved from P and Q, respectively?
ⓐ. \(0.560\,\mathrm{L}\) and \(0.560\,\mathrm{L}\)
ⓑ. \(1.120\,\mathrm{L}\) and \(0.560\,\mathrm{L}\)
ⓒ. \(0.560\,\mathrm{L}\) and \(1.120\,\mathrm{L}\)
ⓓ. \(1.120\,\mathrm{L}\) and \(1.120\,\mathrm{L}\)
Correct Answer: \(0.560\,\mathrm{L}\) and \(1.120\,\mathrm{L}\)
Explanation: The calculation depends on the number of diazonium cations present in each salt formula unit.
It is incorrect to assume that one formula unit of every diazonium salt necessarily contains only one diazonium group.
\(\textbf{Determine the ionic compositions:}\)
In P, the hydrogensulphate ion carries a charge of \(-1\).
It is balanced by one benzenediazonium cation carrying a charge of \(+1\).
Therefore, each formula unit of P contains one diazonium group.
In Q, the sulphate ion carries a charge of \(-2\).
Two benzenediazonium cations are required to balance this charge.
Therefore, each formula unit of Q contains two diazonium groups.
\(\textbf{Hydrolytic decomposition:}\)
Each benzenediazonium cation undergoes the transformation:
\[
\mathrm{C_6H_5N_2^++H_2O\longrightarrow C_6H_5OH+N_2+H^+}
\]
One mole of diazonium groups produces one mole of nitrogen.
\(\textbf{Nitrogen evolved from P:}\)
\[
n_{\mathrm{N_2,P}}=0.025\times1
\]
\[
n_{\mathrm{N_2,P}}=0.025\,\mathrm{mol}
\]
\[
V_{\mathrm{N_2,P}}=0.025\times22.4
\]
\[
V_{\mathrm{N_2,P}}=0.560\,\mathrm{L}
\]
\(\textbf{Nitrogen evolved from Q:}\)
\[
n_{\mathrm{N_2,Q}}=0.025\times2
\]
\[
n_{\mathrm{N_2,Q}}=0.050\,\mathrm{mol}
\]
\[
V_{\mathrm{N_2,Q}}=0.050\times22.4
\]
\[
V_{\mathrm{N_2,Q}}=1.120\,\mathrm{L}
\]
\(\textbf{Chemical consistency check:}\)
The sulphate and hydrogensulphate counterions are not the sources of the evolved nitrogen.
The difference arises solely from the number of diazonium cations required for charge neutrality.
The amount of phenol produced from Q is also twice that produced from P under the stipulated complete hydrolysis conditions.
\(\textbf{Final answer:}\)
\[
\boxed{(V_{\mathrm{P}},V_{\mathrm{Q}})=(0.560,\ 1.120)\,\mathrm{L}}
\]
278. Aniline is converted into benzenediazonium chloride at 273–278 K.
The diazonium salt is subjected to Sandmeyer cyanation to form compound P.
P undergoes controlled partial hydrolysis to give a primary amide Q.
Finally, Q is treated with bromine and aqueous sodium hydroxide under Hofmann bromamide degradation conditions.
Assume each transformation is complete.
Which statement correctly identifies Q and the final organic product R?
ⓐ. Q is benzamide, and R is aniline.
ⓑ. Q is phenylacetamide, and R is benzylamine.
ⓒ. Q is benzamide, and R is benzylamine.
ⓓ. Q is N-phenylmethanamide, and R is aniline.
Correct Answer: Q is benzamide, and R is aniline.
Explanation: The pathway contains two reactions that change the number of carbon atoms associated with the nitrogen-containing functional group.
The intermediate structures must be followed carefully because nitrile reduction and Hofmann degradation have different carbon-count consequences.
\(\textbf{Stage 1 — Diazotisation and cyanation:}\)
Aniline initially contains a primary aromatic amino group.
Diazotisation converts this group into a benzenediazonium group.
Sandmeyer cyanation replaces the diazonium group with \(\mathrm{-CN}\).
\[
\mathrm{C_6H_5N_2^+Cl^-\xrightarrow{CuCN}C_6H_5CN+N_2}
\]
Therefore, P is benzonitrile.
Its nitrile carbon is an additional carbon atom attached directly to the original benzene ring.
\(\textbf{Stage 2 — Controlled partial hydrolysis:}\)
Partial hydrolysis converts the nitrile group into a primary amide.
\[
\mathrm{C_6H_5CN\xrightarrow{controlled\ hydrolysis}C_6H_5CONH_2}
\]
The product Q is benzamide.
The nitrile carbon becomes the carbonyl carbon of the amide.
It is not removed during this transformation.
\(\textbf{Stage 3 — Hofmann bromamide degradation:}\)
Benzamide contains the primary amide functionality required for Hofmann degradation.
\[
\mathrm{C_6H_5CONH_2+Br_2+4NaOH\longrightarrow C_6H_5NH_2+2NaBr+Na_2CO_3+2H_2O}
\]
The product R is aniline.
The amide carbonyl carbon is removed from the organic product during the degradation.
\(\textbf{Track the organic carbon count:}\)
Benzonitrile and benzamide contain seven carbon atoms.
Aniline contains six carbon atoms.
Thus, cyanation introduces one carbon, while Hofmann degradation subsequently removes that carbon from the organic framework.
The final compound has the same connectivity as the original aniline, but its amino nitrogen originates from the cyanide-derived intermediate rather than being retained from the original diazonium group.
This reverse synthesis illustrates why carbon accounting and nitrogen-source tracking must both be considered in multistep organic chemistry.
279. An aromatic azo compound X is prepared by coupling benzenediazonium chloride with exactly one molecule of an activated aromatic compound.
The coupling component is one of the following:
P: Phenol, \(\mathrm{C_6H_6O}\)
Q: Aniline, \(\mathrm{C_6H_7N}\)
R: N,N-Dimethylaniline, \(\mathrm{C_8H_{11}N}\)
During coupling, one aromatic hydrogen of the coupling component is replaced by the diazonium-derived azo substituent.
An isolated \(0.594\,\mathrm{g}\) sample of pure X contains \(0.0840\,\mathrm{g}\) of nitrogen.
Given atomic masses: C = 12, H = 1, N = 14, O = 16.
Which option correctly identifies the coupling component and the amount of X?
ⓐ. Aniline; \(3.00\times10^{-3}\,\mathrm{mol}\)
ⓑ. N,N-Dimethylaniline; \(2.64\times10^{-3}\,\mathrm{mol}\)
ⓒ. Phenol; \(2.64\times10^{-3}\,\mathrm{mol}\)
ⓓ. Phenol; \(3.00\times10^{-3}\,\mathrm{mol}\)
Correct Answer: Phenol; \(3.00\times10^{-3}\,\mathrm{mol}\)
Explanation: Azo coupling retains the two nitrogen atoms of the diazonium group within an aromatic azo linkage.
The molecular formula of the product depends on whether the coupling component contributes any additional nitrogen atoms.
The elemental nitrogen analysis can therefore distinguish the candidate products.
\(\textbf{Nitrogen mass fraction of the unknown:}\)
\[
w_{\mathrm{N,X}}=\frac{m_{\mathrm{N}}}{m_{\mathrm{sample}}}
\]
\[
w_{\mathrm{N,X}}=\frac{0.0840}{0.594}
\]
\[
w_{\mathrm{N,X}}\approx0.1414
\]
\[
\%\mathrm{N}\approx14.14\%
\]
\(\textbf{Product from phenol:}\)
Benzenediazonium coupling with phenol gives a hydroxyazobenzene.
Its molecular formula is:
\[
\mathrm{C_{12}H_{10}N_2O}
\]
Its molar mass is:
\[
M_P=12(12)+10(1)+2(14)+16
\]
\[
M_P=198\,\mathrm{g\,mol^{-1}}
\]
The nitrogen mass percentage is:
\[
\%\mathrm{N}_P=\frac{28}{198}\times100
\]
\[
\%\mathrm{N}_P\approx14.14\%
\]
\(\textbf{Check the nitrogen-containing coupling components:}\)
Aniline contributes one additional nitrogen atom, so its azo product contains three nitrogen atoms.
The corresponding formula is \(\mathrm{C_{12}H_{11}N_3}\).
\[
\%\mathrm{N}_Q=\frac{42}{197}\times100\approx21.32\%
\]
N,N-Dimethylaniline also gives an azo product containing three nitrogen atoms.
Its product formula is \(\mathrm{C_{14}H_{15}N_3}\).
\[
\%\mathrm{N}_R=\frac{42}{225}\times100\approx18.67\%
\]
Only the phenol-derived product agrees with the measured nitrogen percentage.
\(\textbf{Amount of the identified azo compound:}\)
\[
n_X=\frac{m_X}{M_X}
\]
\[
n_X=\frac{0.594}{198}
\]
\[
n_X=0.00300\,\mathrm{mol}
\]
\(\textbf{Final answer:}\)
\[
\mathrm{Coupling\ component=phenol},\quad n_X=3.00\times10^{-3}\,\mathrm{mol}
\]
280. Two separate solutions contain equal analytical concentrations of phenol and are maintained at pH 9.0 and pH 11.0, respectively.
The pKa of phenol is taken as 10.0.
Assume ideal acid–base equilibrium and use:
\[
\frac{[\mathrm{C_6H_5O^-}]}{[\mathrm{C_6H_5OH}]}=10^{\mathrm{pH}-\mathrm{p}K_a}
\]
The solutions are intended as coupling components for freshly prepared benzenediazonium chloride.
Ignoring subsequent changes caused by mixing, what is the ratio of the phenoxide concentrations in the pH 11.0 solution to those in the pH 9.0 solution?
ⓐ. 11
ⓑ. 100
ⓒ. 50
ⓓ. 10
Correct Answer: 10
Explanation: Phenol is an activated aromatic coupling component for arenediazonium salts.
In alkaline solution, phenol can lose its hydroxyl proton to form phenoxide.
The phenoxide form is strongly electron donating through resonance and is relevant to azo-coupling behaviour.
However, the question asks for a concentration ratio established before the coupling reagent is introduced.
The calculation must therefore use acid–base fractions rather than assume a direct proportionality between pH and reaction yield.
\(\textbf{Phenoxide fraction relation:}\)
Let the analytical phenol concentration in either solution be C.
For the equilibrium:
\[
\mathrm{C_6H_5OH\rightleftharpoons C_6H_5O^-+H^+}
\]
the fraction present as phenoxide is:
\[
f=\frac{10^{\mathrm{pH}-\mathrm{p}K_a}}{1+10^{\mathrm{pH}-\mathrm{p}K_a}}
\]
\(\textbf{At pH 9.0:}\)
\[
\frac{[\mathrm{PhO^-}]}{[\mathrm{PhOH}]}=10^{9.0-10.0}=0.1
\]
\[
f_9=\frac{0.1}{1+0.1}
\]
\[
f_9=\frac{1}{11}
\]
\(\textbf{At pH 11.0:}\)
\[
\frac{[\mathrm{PhO^-}]}{[\mathrm{PhOH}]}=10^{11.0-10.0}=10
\]
\[
f_{11}=\frac{10}{1+10}
\]
\[
f_{11}=\frac{10}{11}
\]
\(\textbf{Compare the concentrations:}\)
Because both solutions have the same analytical phenol concentration:
\[
[\mathrm{PhO^-}]_9=Cf_9
\]
\[
[\mathrm{PhO^-}]_{11}=Cf_{11}
\]
\[
\frac{[\mathrm{PhO^-}]_{11}}{[\mathrm{PhO^-}]_9}
=\frac{10/11}{1/11}
\]
\[
=10
\]
\(\textbf{Chemical interpretation:}\)
Increasing pH by two units increases the phenoxide-to-phenol ratio by a factor of 100.
However, the phenoxide concentration itself increases by a factor of 10 because the fraction cannot exceed unity.
This distinction prevents confusing an equilibrium species ratio with the fraction of the total compound present in that form.
Actual azo-coupling yield would also depend on diazonium stability and subsequent reaction conditions, which are not used in this calculation.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{[\mathrm{PhO^-}]_{\mathrm{pH}\,11}}{[\mathrm{PhO^-}]_{\mathrm{pH}\,9}}=10}
\]
281. The compound 4-(aminomethyl)aniline has the structure:
\[
\mathrm{4\!-\!H_2NC_6H_4CH_2NH_2}
\]
It contains one primary aromatic amino group and one primary aliphatic amino group.
The compound is treated with sufficient nitrous acid in cold acidic solution under the following stipulated conditions:
(i) The benzylic amino group is quantitatively replaced by hydroxyl with immediate nitrogen evolution.
(ii) The aromatic amino group is quantitatively converted into a diazonium group that remains in the cold solution.
The remaining diazonium functionality is then coupled quantitatively with phenol at its para position under suitable conditions.
Which statement correctly identifies the final organic product and the amount of nitrogen gas evolved per mole of starting compound?
ⓐ. 4-Hydroxybenzyl alcohol; two moles of nitrogen
ⓑ. A hydroxy-substituted azo compound containing a benzylic amino group; one mole of nitrogen
ⓒ. A hydroxymethyl-substituted hydroxyazobenzene; one mole of nitrogen
ⓓ. A hydroxymethyl-substituted hydroxyazobenzene; two moles of nitrogen
Correct Answer: A hydroxymethyl-substituted hydroxyazobenzene; one mole of nitrogen
Explanation: The starting compound contains two primary amino groups, but their nitrogen atoms are attached to different types of carbon.
The benzylic amino nitrogen is bonded to a saturated methylene carbon.
The aromatic amino nitrogen is bonded directly to a benzene-ring carbon.
This difference allows two different nitrous-acid outcomes under the stated conditions.
\(\textbf{Transformation of the benzylic amino group:}\)
The primary aliphatic amino group forms an unstable diazonium intermediate.
It undergoes the stipulated replacement by hydroxyl with liberation of nitrogen.
The substituent changes from \(\mathrm{-CH_2NH_2}\) to \(\mathrm{-CH_2OH}\).
One mole of molecular nitrogen is evolved per mole of starting compound.
\(\textbf{Transformation of the aromatic amino group:}\)
The primary aromatic amino group undergoes diazotisation at 273–278 K.
Its diazonium group remains attached to the aromatic ring in cold solution.
The intermediate therefore contains an aromatic diazonium group and a para hydroxymethyl substituent.
\(\textbf{Subsequent azo coupling:}\)
Phenol is an activated aromatic coupling component.
Its available para position participates in electrophilic azo coupling under appropriate conditions.
Both nitrogen atoms of the aromatic diazonium group are retained in the resulting azo linkage.
They do not leave as a second molecule of nitrogen gas.
The product contains two aromatic rings joined by \(\mathrm{-N=N-}\).
One ring retains the hydroxymethyl group formed from the original benzylic amino group.
The other ring contains the phenolic hydroxyl group.
The final organic compound is therefore a hydroxymethyl-substituted hydroxyazobenzene.
The distinction between nitrogen elimination and nitrogen retention is essential: only the benzylic amino group contributes molecular nitrogen to the collected gas.
This reaction combines two different nitrous-acid pathways within the same molecule with a subsequent nitrogen-retaining coupling reaction.
282. Aniline is divided into two portions.
Portion P is heated with chloroform and ethanolic potassium hydroxide to form an isocyanide.
Portion Q is diazotised at 273–278 K and subsequently treated with cuprous cyanide under Sandmeyer conditions.
The final products have the same molecular formula, \(\mathrm{C_7H_5N}\).
Which statement correctly identifies their connectivities and the sources of nitrogen?
ⓐ. P gives benzonitrile containing nitrogen from aniline; Q gives phenyl isocyanide containing nitrogen from cyanide.
ⓑ. Both give benzonitrile because any product containing a carbon–nitrogen triple bond is a nitrile.
ⓒ. Both give phenyl isocyanide because the aromatic ring initially contains an amino group.
ⓓ. P gives phenyl isocyanide containing the original aniline nitrogen; Q gives benzonitrile containing nitrogen introduced through cyanide.
Correct Answer: P gives phenyl isocyanide containing the original aniline nitrogen; Q gives benzonitrile containing nitrogen introduced through cyanide.
Explanation: The two transformations introduce a one-carbon fragment, but they establish different connections between that carbon and the original aromatic system.
The identity of the nitrogen atom retained in each product also differs.
\(\textbf{Pathway P — Carbylamine reaction:}\)
Aniline is a primary aromatic amine.
It reacts with chloroform and ethanolic potassium hydroxide to form phenyl isocyanide.
\[
\mathrm{C_6H_5NH_2+CHCl_3+3KOH\longrightarrow C_6H_5NC+3KCl+3H_2O}
\]
The original aniline nitrogen remains directly bonded to the phenyl group.
The additional terminal carbon originates from chloroform.
The product has the connectivity:
\[
\mathrm{C_6H_5-N\equiv C}
\]
\(\textbf{Pathway Q — Diazotisation and cyanation:}\)
Aniline first forms benzenediazonium chloride.
The original amino-derived nitrogen atoms leave as molecular nitrogen during Sandmeyer cyanation.
\[
\mathrm{C_6H_5N_2^+Cl^-\xrightarrow{CuCN}C_6H_5CN+N_2}
\]
The introduced cyanide carbon becomes directly bonded to the aromatic ring.
The product has the connectivity:
\[
\mathrm{C_6H_5-C\equiv N}
\]
Its nitrogen originates from cyanide.
\(\textbf{Compare the products:}\)
Both products have the formula \(\mathrm{C_7H_5N}\).
However, they differ in whether the phenyl group is bonded directly to nitrogen or to the nitrile carbon.
They are functional isomers rather than alternative representations of the same compound.
The comparison demonstrates that identical molecular formulas and similar-looking triple bonds do not establish identical connectivity.
The original aniline nitrogen is retained in the isocyanide route but replaced in the diazonium cyanation route.
283. 4-Aminobenzonitrile, \(\mathrm{4\!-\!H_2NC_6H_4CN}\), is used to prepare 4-fluorobenzylamine, \(\mathrm{4\!-\!FC_6H_4CH_2NH_2}\).
Two synthetic orders are considered:
Route P: Diazotisation of the aromatic amino group, conversion into its tetrafluoroborate salt, thermal fluorination, and finally reduction of the nitrile.
Route Q: Reduction of the nitrile first, followed by treatment with nitrous acid and attempted aromatic fluorination.
Which statement correctly identifies the more direct selective route and its crucial intermediate?
ⓐ. Route P; the crucial intermediate before nitrile reduction is 4-fluorobenzonitrile.
ⓑ. Route Q; the crucial intermediate before fluorination is benzenediazonium chloride containing no other amino group.
ⓒ. Route P; the crucial intermediate before nitrile reduction is 4-fluorobenzamide.
ⓓ. Route Q; nitrile reduction converts the aromatic amino group into a nonreactive amide protecting group.
Correct Answer: Route P; the crucial intermediate before nitrile reduction is 4-fluorobenzonitrile.
Explanation: The starting compound contains two different nitrogen-containing functional groups.
One is a primary aromatic amino group.
The other is a nitrile group.
The target requires replacing the directly aromatic amino group with fluorine while converting the nitrile into a benzylamine side chain.
\(\textbf{Route P — Transform the aromatic amino group first:}\)
The primary aromatic amino group undergoes diazotisation at 273–278 K.
The diazonium salt is converted into its tetrafluoroborate derivative.
On suitable heating, the diazonium group is replaced by fluorine.
The nitrile group is stipulated to remain intact during these operations.
The intermediate is therefore 4-fluorobenzonitrile.
\[
\mathrm{4\!-\!H_2NC_6H_4CN\longrightarrow4\!-\!FC_6H_4CN}
\]
\(\textbf{Reduce the remaining nitrile:}\)
Lithium aluminium hydride reduces the nitrile carbon–nitrogen triple bond.
\[
\mathrm{4\!-\!FC_6H_4CN\xrightarrow[\text{work-up}]{LiAlH_4}4\!-\!FC_6H_4CH_2NH_2}
\]
The final product is 4-fluorobenzylamine.
\(\textbf{Why the reverse order is less straightforward:}\)
Reducing the nitrile first would produce a molecule containing both a primary aromatic amino group and a primary benzylic amino group.
These amino groups have different reactions with nitrous acid.
The benzylic amino group could undergo nitrogen-evolving decomposition rather than remaining automatically unchanged.
This introduces a selectivity complication absent from Route P.
Therefore, the prescribed order avoids creating a second nitrous-acid-reactive primary amino group before diazotisation.
The key planning principle is to transform the aromatic amino group while the other nitrogen-containing functionality remains a nitrile.
Only after completing aromatic fluorination is the nitrile converted into the desired primary amine.
284. Sulphanilic acid is 4-aminobenzenesulfonic acid, containing an aromatic amino group and a sulfonic acid group at para positions.
It is diazotised under appropriate cold conditions, and the resulting aromatic diazonium species is coupled with N,N-dimethylaniline at the para position of its N,N-dimethylamino-substituted ring.
Which statement correctly describes the principal azo product?
ⓐ. The sulfonic acid group is eliminated, and all three nitrogen atoms enter one continuous \(\mathrm{-N=N=N-}\) linkage.
ⓑ. Both nitrogen atoms of the diazonium group leave as nitrogen gas, giving two aromatic rings joined by a carbon–carbon bond.
ⓒ. The tertiary dimethylamino group is converted into a primary amino group because azo coupling requires an N–H bond.
ⓓ. The sulfonic acid group is retained; the two diazonium nitrogen atoms form an azo linkage; and the tertiary dimethylamino group remains attached to the coupling ring.
Correct Answer: The sulfonic acid group is retained; the two diazonium nitrogen atoms form an azo linkage; and the tertiary dimethylamino group remains attached to the coupling ring.
Explanation: Sulphanilic acid contains two different functional groups attached to the benzene ring.
Its primary aromatic amino group is suitable for diazotisation.
The sulfonic acid group remains part of the aromatic framework under the stipulated conditions.
\(\textbf{Diazotisation of sulphanilic acid:}\)
The primary amino group is converted into a diazonium functionality at 273–278 K.
The aromatic carbon originally bonded to the amino nitrogen remains part of the benzene ring.
The para sulfonic acid substituent is not removed by this functional-group conversion.
\(\textbf{Role of N,N-dimethylaniline:}\)
N,N-Dimethylaniline is a tertiary aromatic amine.
Its nitrogen possesses no N–H bond but retains a lone pair in the neutral molecule.
This lone pair can donate electron density into the aromatic ring through resonance.
Consequently, the ring can undergo suitable electrophilic azo coupling.
\(\textbf{Formation of the azo linkage:}\)
The activated para carbon of the dimethylamino-substituted ring participates in coupling.
The two diazonium nitrogen atoms are retained as the \(\mathrm{-N=N-}\) bridge between the aromatic systems.
They are not released as molecular nitrogen.
The N,N-dimethylamino nitrogen remains attached to its two original methyl groups and its aromatic ring.
The sulfonic acid or sulfonate functionality also remains present in the product, depending on the final acid–base conditions.
The resulting compound is an azo-dye structure with extended conjugation.
The three nitrogen atoms in the product have different roles: two belong to the azo linkage, while the third remains part of the dimethylamino substituent.
The correct prediction requires distinguishing diazotisation at a primary aromatic amino group from azo coupling at a ring activated by a tertiary aromatic amino group.
285. 4-Aminobenzaldehyde has the structure \(\mathrm{4\!-\!H_2NC_6H_4CHO}\).
A chemist wishes to obtain 4-(hydroxymethyl)benzonitrile while retaining the para relationship between the two substituents.
The following sequence is proposed:
(i) Diazotisation of the primary aromatic amino group at 273–278 K.
(ii) Sandmeyer cyanation using cuprous cyanide.
(iii) Reduction using sodium borohydride under conditions that reduce aldehydes but leave nitriles unchanged.
Assume the aldehyde group remains unchanged during steps (i) and (ii).
Which principal product is expected?
ⓐ. \(\mathrm{4\!-\!H_2NC_6H_4CH_2OH}\)
ⓑ. \(\mathrm{4\!-\!NCC_6H_4COOH}\)
ⓒ. \(\mathrm{4\!-\!H_2NCH_2C_6H_4CH_2OH}\)
ⓓ. \(\mathrm{4\!-\!HOCH_2C_6H_4CN}\)
Correct Answer: \(\mathrm{4\!-\!HOCH_2C_6H_4CN}\)
Explanation: The starting compound contains a primary aromatic amino group and an aldehyde group.
The desired product requires two independent changes.
The amino-bearing aromatic position must acquire a cyano group.
The aldehyde group must become a hydroxymethyl group.
\(\textbf{First transformation — Diazotisation:}\)
The amino group is converted into an arenediazonium functionality using sodium nitrite and hydrochloric acid at 273–278 K.
The aldehyde group is preserved under the stipulated conditions.
\(\textbf{Second transformation — Sandmeyer cyanation:}\)
Cuprous cyanide replaces the diazonium group with \(\mathrm{-CN}\).
The introduced cyanide carbon becomes directly bonded to the aromatic ring.
The resulting intermediate is 4-formylbenzonitrile.
It contains both a nitrile group and an aldehyde group.
\(\textbf{Third transformation — Selective reduction:}\)
Sodium borohydride reduces the aldehyde carbonyl group to a primary alcohol under the stated conditions.
\[
\mathrm{4\!-\!NCC_6H_4CHO\xrightarrow{NaBH_4}4\!-\!NCC_6H_4CH_2OH}
\]
The nitrile remains unchanged under the stipulated selectivity conditions.
The final product is therefore 4-(hydroxymethyl)benzonitrile.
\(\textbf{Why reagent selection matters:}\)
Lithium aluminium hydride would not provide the same selectivity because it can also reduce nitrile groups to primary amino groups.
The final structure must retain the cyanide-derived carbon–nitrogen triple bond.
The original aldehyde carbon is preserved as the carbon of the hydroxymethyl group.
Thus, the synthesis introduces an additional carbon through cyanation and independently changes the oxidation state of the original aldehyde carbon.
The para relationship between the two functional groups is maintained throughout the specified sequence.
286. Consider the following assertion and reason.
Assertion (A): Aniline undergoes diazotisation with sodium nitrite and hydrochloric acid at 273–278 K even though a substantial fraction of its amino groups can be protonated in the acidic reaction medium.
Reason (R): Acid provides the conditions needed to generate nitrous acid and the active nitrosating species, while protonation of aniline is an equilibrium and diazotisation is a reaction involving the amino functionality rather than ordinary electrophilic substitution at the aromatic carbon atoms.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: Aniline is a weak aromatic base because its nitrogen possesses a lone pair that can accept a proton.
In sufficiently acidic solution, aniline establishes an equilibrium with the corresponding anilinium ion.
The protonated form no longer possesses the same available nitrogen lone pair for donation into the aromatic ring.
This fact is important when interpreting electrophilic aromatic substitution under strongly acidic conditions.
However, diazotisation is not the same reaction as nitration or bromination of the aromatic ring.
\(\textbf{Role of the acidic nitrite medium:}\)
Sodium nitrite reacts with hydrochloric acid to generate nitrous acid in situ.
The acidic medium supports formation of the nitrosating species required for diazotisation.
Although aniline is partly protonated, acid–base equilibrium allows interconversion between its neutral and protonated forms.
The reactive amino functionality can therefore participate in the diazotisation process.
\(\textbf{Formation of the diazonium salt:}\)
The standard overall reaction is:
\[
\mathrm{C_6H_5NH_2+NaNO_2+2HCl\longrightarrow C_6H_5N_2^+Cl^-+NaCl+2H_2O}
\]
The product is benzenediazonium chloride.
Maintaining 273–278 K helps preserve the aromatic diazonium salt in solution.
The assertion is correct because diazotisation occurs under these acidic conditions.
The reason is also correct because it distinguishes the purpose of acid in diazotisation from the electronic consequences of protonating aniline during an aromatic ring-substitution reaction.
There is no contradiction between acid suppressing the usual ring activation of the free amino group and acid being required for the preparation of an aromatic diazonium salt.
The two observations concern different reaction centres and different chemical transformations.
287. The compound 4-aminoacetanilide has the structure:
\[
\mathrm{4\!-\!H_2NC_6H_4NHCOCH_3}
\]
It contains one free primary aromatic amino group and one acetamido group.
The following sequence is performed under conditions that preserve the acetamido group during the first two reactions:
(i) Diazotisation with sodium nitrite and hydrochloric acid at 273–278 K.
(ii) Treatment of the diazonium intermediate with potassium iodide.
(iii) Complete hydrolysis of the remaining acetamido group, followed by suitable work-up.
Which compound is obtained?
ⓐ. 2-Iodoaniline
ⓑ. 4-Iodoaniline
ⓒ. 4-Iodoacetanilide
ⓓ. 4-Aminophenol
Correct Answer: 4-Iodoaniline
Explanation: The starting compound contains two nitrogen atoms directly attached to different aromatic carbon positions.
However, only one nitrogen belongs to a free primary aromatic amino group.
The other belongs to an amide functionality.
Their reactions with the specified reagents must therefore be considered separately.
\(\textbf{Stage 1 — Selective diazotisation:}\)
The free \(\mathrm{-NH_2}\) group can undergo diazotisation in cold acidic solution.
The acetamido nitrogen is strongly influenced by resonance with its adjacent carbonyl group.
It does not behave as a free primary aromatic amino group in the ordinary diazotisation reaction.
The resulting intermediate retains the acetamido group and contains a diazonium group at the para aromatic position.
\(\textbf{Stage 2 — Replacement by iodide:}\)
Potassium iodide replaces the aromatic diazonium group with iodine.
Molecular nitrogen is released.
The product at this stage is 4-iodoacetanilide.
The iodine atom occupies the aromatic position originally bearing the free amino group.
\(\textbf{Stage 3 — Hydrolysis of the protecting group:}\)
Complete hydrolysis cleaves the N-acetyl linkage of the acetamido group.
The original aromatic amino functionality protected as an amide is regenerated after work-up.
The pre-existing aromatic carbon–iodine bond remains intact under the stipulated conditions.
The final compound is therefore 4-iodoaniline.
\(\textbf{Distinguish intermediate and final product:}\)
4-Iodoacetanilide is produced after iodide replacement but before hydrolysis.
It is not the final product of the complete sequence.
The synthesis uses two nitrogen sites in different roles: one is removed through diazonium substitution, while the other is temporarily protected and later regenerated.
The para relationship between the two original amino-derived positions is preserved throughout.
288. Three substrates are considered for introducing a cyano group:
P: Benzenediazonium chloride treated with \(\mathrm{CuCN}\) under Sandmeyer conditions.
Q: Chlorobenzene treated with aqueous potassium cyanide under ordinary nucleophilic substitution conditions.
R: Bromoethane treated with alcoholic potassium cyanide under suitable substitution conditions.
Which statement correctly identifies the expected principal carbon–cyanide bond-forming outcomes?
ⓐ. P and Q give benzonitrile, whereas R gives ethanamine.
ⓑ. Q and R give nitriles, whereas P gives phenyl isocyanide.
ⓒ. P gives benzonitrile; Q lacks the stipulated ordinary cyanide displacement; R gives propanenitrile.
ⓓ. P gives phenyl isocyanide, Q gives benzonitrile, and R gives ethyl isocyanide.
Correct Answer: P gives benzonitrile; Q lacks the stipulated ordinary cyanide displacement; R gives propanenitrile.
Explanation: All three transformations involve cyanide-containing reagents, but the substrates possess different leaving groups and bonding environments.
A cyanide reagent cannot be assumed to produce the same type of substitution with every organic compound.
\(\textbf{Reaction P — Aromatic diazonium cyanation:}\)
Benzenediazonium chloride contains an excellent leaving group attached to an aromatic carbon.
Cuprous cyanide replaces this diazonium group with \(\mathrm{-CN}\).
The organic product is benzonitrile.
Its nitrile carbon is directly attached to the benzene ring.
\(\textbf{Reaction Q — Ordinary aryl chloride substitution:}\)
Chlorobenzene contains a carbon–chlorine bond attached to an aromatic \(sp^2\)-hybridised carbon.
Under ordinary aqueous KCN substitution conditions, this bond does not undergo the normal alkyl-halide nucleophilic substitution process.
Therefore, benzonitrile is not obtained through the proposed ordinary treatment.
The diazonium method is valuable precisely because it allows introduction of cyanide where direct substitution of an ordinary aryl chloride is unsuitable.
\(\textbf{Reaction R — Aliphatic halide substitution:}\)
Bromoethane is a suitable primary alkyl halide for nucleophilic substitution by cyanide.
With alcoholic KCN, attack occurs through the carbon end of cyanide.
\[
\mathrm{CH_3CH_2Br+KCN\longrightarrow CH_3CH_2CN+KBr}
\]
The product is propanenitrile.
Its nitrile carbon adds one carbon atom to the original ethyl framework.
\(\textbf{Compare the three results:}\)
P and R both introduce a nitrile carbon, but they use different substrate types and reaction mechanisms.
Q does not react through the ordinary alkyl-halide substitution pathway because its halogen is bonded directly to an aromatic carbon.
The distinction integrates leaving-group behaviour, reagent choice and carbon-framework tracking.
289. A cold solution of 2-bromo-4-methylbenzenediazonium chloride is coupled with phenol under conditions favouring substitution at the para position relative to phenolic hydroxyl.
The diazonium group is designated as occupying carbon 1 of its aromatic ring.
The bromine and methyl substituents are initially at carbon 2 and carbon 4, respectively.
Which statement correctly describes the principal azo product?
ⓐ. The azo linkage joins the diazonium-derived ring at carbon 1 to the phenolic ring at its para position; the original bromine and methyl substituents remain at carbon 2 and carbon 4 of the first ring.
ⓑ. The azo linkage forms through the bromine-bearing carbon of the diazonium-derived ring, and bromine is eliminated.
ⓒ. The azo linkage connects the two rings through their methyl and hydroxyl substituents, leaving the diazonium group unchanged.
ⓓ. The phenolic ring couples exclusively at the carbon directly bonded to hydroxyl, while the diazonium nitrogen atoms leave as nitrogen gas.
Correct Answer: The azo linkage joins the diazonium-derived ring at carbon 1 to the phenolic ring at its para position; the original bromine and methyl substituents remain at carbon 2 and carbon 4 of the first ring.
Explanation: The starting diazonium salt contains a diazonium group and two additional substituents on its aromatic ring.
The diazonium group is attached at carbon 1.
Bromine occupies carbon 2, while methyl occupies carbon 4.
The coupling reaction must preserve this established substitution pattern unless a separate displacement or rearrangement is specified.
\(\textbf{Role of the diazonium-containing ring:}\)
The diazonium group serves as the electrophilic azo-coupling functionality.
Its two nitrogen atoms are retained in the resulting \(\mathrm{-N=N-}\) linkage.
The azo connection remains associated with the original diazonium-bearing aromatic carbon.
The ring bromine and methyl groups are not the leaving groups in this reaction.
\(\textbf{Role of the phenolic ring:}\)
Phenol activates its aromatic ring through oxygen lone-pair resonance donation.
The ortho and para positions are especially reactive toward suitable electrophiles.
The question specifies conditions favouring coupling at the available para position.
Therefore, the azo linkage attaches at carbon 4 relative to the phenolic hydroxyl group.
\(\textbf{Resulting molecular connectivity:}\)
The product contains two aromatic rings joined by an azo linkage.
One aromatic ring retains bromine and methyl at the original carbon 2 and carbon 4 positions.
The second ring contains hydroxyl para to the newly formed azo bond.
The azo nitrogen atoms are retained rather than released as nitrogen gas.
The reaction therefore differs from Sandmeyer substitution, in which the diazonium group is displaced by a new substituent.
The correct structure requires tracking two different aromatic numbering systems and recognising which atoms participate in azo bond formation.
290. Benzamide, \(\mathrm{C_6H_5CONH_2}\), is divided into two portions.
Pathway P:
\[
\mathrm{Benzamide\xrightarrow{Br_2/NaOH}P_1
\xrightarrow{NaNO_2/HCl,\ 273-278\,K}P_2
\xrightarrow{warm\ H_2O}P_3}
\]
Pathway Q:
\[
\mathrm{Benzamide\xrightarrow[\text{work-up}]{LiAlH_4}Q_1
\xrightarrow{HNO_2}Q_2}
\]
For the reaction producing Q2, assume the standard primary-aliphatic-amine-to-alcohol transformation occurs without rearrangement.
Which statement correctly identifies P3 and Q2?
ⓐ. P3 is benzyl alcohol, and Q2 is phenol.
ⓑ. Both P3 and Q2 are phenol because both pathways begin with benzamide.
ⓒ. P3 is aniline, and Q2 is benzonitrile.
ⓓ. P3 is phenol, and Q2 is benzyl alcohol.
Correct Answer: P3 is phenol, and Q2 is benzyl alcohol.
Explanation: The two pathways begin with the same primary amide but apply fundamentally different reactions.
One removes the amide carbonyl carbon from the organic framework.
The other retains it and converts it into a methylene carbon.
This distinction determines whether the intermediate amino group is directly aromatic or benzylic.
\(\textbf{Pathway P — Hofmann bromamide degradation:}\)
Benzamide reacts with bromine and aqueous sodium hydroxide to produce aniline.
\[
\mathrm{C_6H_5CONH_2\xrightarrow{Br_2/NaOH}C_6H_5NH_2}
\]
The carbonyl carbon is removed during this conversion.
Therefore, P1 is aniline.
\(\textbf{Diazotisation of P1:}\)
Aniline is a primary aromatic amine.
It forms benzenediazonium chloride with sodium nitrite and hydrochloric acid at 273–278 K.
Therefore, P2 is benzenediazonium chloride.
\(\textbf{Hydrolysis of P2:}\)
Warming the diazonium solution with water replaces the diazonium group by hydroxyl.
P3 is phenol, \(\mathrm{C_6H_5OH}\).
\(\textbf{Pathway Q — Reduction of benzamide:}\)
Lithium aluminium hydride retains the amide carbonyl carbon while reducing it to a methylene group.
\[
\mathrm{C_6H_5CONH_2\xrightarrow[\text{work-up}]{LiAlH_4}C_6H_5CH_2NH_2}
\]
Q1 is benzylamine.
Its nitrogen is attached to a saturated methylene carbon.
Therefore, it behaves as a primary aliphatic amine toward nitrous acid.
\(\textbf{Formation of Q2:}\)
Under the stipulated standard transformation, benzylamine produces benzyl alcohol with nitrogen evolution.
\[
\mathrm{C_6H_5CH_2NH_2+HNO_2\longrightarrow C_6H_5CH_2OH+N_2+H_2O}
\]
Q2 is benzyl alcohol.
\(\textbf{Carbon-framework check:}\)
Phenol contains six carbon atoms, while benzyl alcohol contains seven.
The difference originates in the first reaction of each pathway rather than in the final nitrous-acid chemistry.
The correct prediction therefore requires combining amide chemistry, amine classification and the distinct fates of aromatic and aliphatic diazonium intermediates.
291. 4-Aminobenzoic acid, \(\mathrm{4\!-\!H_2NC_6H_4COOH}\), is diazotised at 273–278 K and coupled quantitatively with phenol at the para position relative to hydroxyl under suitable conditions.
The neutral azo product is isolated without alteration of the original carboxylic acid group.
A \(0.060\,\mathrm{mol}\) sample of this product is then treated with sufficient aqueous sodium hydroxide to deprotonate quantitatively both its carboxylic acid group and its phenolic hydroxyl group.
Assume no other NaOH-consuming reactions.
Which statement correctly gives the number of diazonium-derived nitrogen atoms retained per azo molecule and the minimum stoichiometric amount of NaOH required?
ⓐ. Two nitrogen atoms retained; \(0.060\,\mathrm{mol}\) NaOH
ⓑ. Two nitrogen atoms retained; \(0.120\,\mathrm{mol}\) NaOH
ⓒ. No diazonium-derived nitrogen retained; \(0.120\,\mathrm{mol}\) NaOH
ⓓ. One diazonium-derived nitrogen retained; \(0.180\,\mathrm{mol}\) NaOH
Correct Answer: Two nitrogen atoms retained; \(0.120\,\mathrm{mol}\) NaOH
Explanation: The synthesis begins with a primary aromatic amine containing a carboxylic acid substituent.
Diazotisation converts the primary amino group into a diazonium functionality.
The carboxylic acid group remains attached to its original aromatic carbon under the stipulated conditions.
\(\textbf{Formation of the azo product:}\)
The aromatic diazonium species couples with phenol at the available para position relative to hydroxyl.
The two diazonium nitrogen atoms are retained in the azo linkage.
The product is 4-[(4-hydroxyphenyl)diazenyl]benzoic acid.
It contains two aromatic rings joined by \(\mathrm{-N=N-}\).
One ring contains a carboxylic acid group.
The other contains a phenolic hydroxyl group.
\(\textbf{Identify the acidic groups:}\)
The carboxylic acid group can donate one proton to hydroxide.
The phenolic hydroxyl group can also donate one proton under the stipulated complete deprotonation conditions.
Therefore, each molecule contains two specified NaOH-consuming acidic sites.
The azo linkage itself is not counted as an additional acidic O–H or N–H functionality.
\(\textbf{First neutralisation — Carboxylic acid:}\)
\[
\mathrm{ArCOOH+NaOH\longrightarrow ArCOONa+H_2O}
\]
One mole of NaOH is required per mole of carboxylic acid groups.
For \(0.060\,\mathrm{mol}\) of azo product:
\[
n_{\mathrm{NaOH,COOH}}=0.060\,\mathrm{mol}
\]
\(\textbf{Second neutralisation — Phenolic hydroxyl:}\)
\[
\mathrm{ArOH+NaOH\longrightarrow ArONa+H_2O}
\]
Under the stipulated complete deprotonation conditions:
\[
n_{\mathrm{NaOH,phenol}}=0.060\,\mathrm{mol}
\]
\(\textbf{Combined NaOH requirement:}\)
\[
n_{\mathrm{NaOH,total}}=0.060+0.060
\]
\[
n_{\mathrm{NaOH,total}}=0.120\,\mathrm{mol}
\]
\(\textbf{Structural and stoichiometric check:}\)
The molecule retains both diazonium nitrogen atoms because the first transformation is azo coupling rather than displacement.
Its two acidic sites come from the carboxyl group originally present in the aromatic amine and the hydroxyl group supplied by the phenol coupling component.
Counting only the carboxylic acid would underestimate the NaOH requirement.
Counting the azo nitrogen atoms as additional acidic sites would overestimate it.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{diazonium\!-\!derived}}=2\ \text{atoms per molecule},\qquad n_{\mathrm{NaOH}}=0.120\,\mathrm{mol}}
\]
292. Consider the following assertion and reason.
Assertion (A): Benzenediazonium chloride can be used as a reactive intermediate in cold aqueous solution, whereas the corresponding diazonium compound obtained from benzylamine does not show comparable stability under ordinary diazotisation conditions.
Reason (R): In the benzenediazonium ion, the diazonium group is directly attached to an aromatic carbon and receives resonance stabilisation; in the diazonium species derived from benzylamine, a saturated methylene carbon separates the diazonium group from the aromatic ring.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The stability of a diazonium species depends strongly on the carbon framework directly attached to the diazonium group.
Aniline contains a primary amino group bonded directly to an aromatic carbon.
Diazotisation of aniline produces benzenediazonium chloride, which has useful temporary stability in cold aqueous solution at 273–278 K.
The arenediazonium ion receives resonance stabilisation associated with its direct connection to the aromatic system.
This helps explain why the salt can be prepared and employed in subsequent substitution or coupling reactions.
Benzylamine is structurally different despite containing a benzene ring.
Its nitrogen is bonded to a saturated methylene carbon rather than directly to an aromatic carbon.
Diazotisation therefore produces an aliphatic diazonium species.
That species lacks the corresponding direct aromatic resonance interaction and is highly unstable under ordinary conditions.
It undergoes decomposition rather than remaining available as a comparatively stable cold arenediazonium intermediate.
The presence of a benzene ring somewhere within a molecule is consequently insufficient to predict arenediazonium stability.
The assertion is correct, and the reason identifies the structural feature responsible for the difference.
This also illustrates why the original amino-group attachment must be inspected before planning a diazonium-based synthesis.
293. Two experiments use isotopically labelled oxygen under the following conditions.
Experiment P: Benzenediazonium chloride is hydrolysed quantitatively using water enriched in \(^{18}\mathrm{O}\). Assume the hydroxyl oxygen introduced into phenol originates from the attacking water and undergoes no subsequent isotope exchange.
Experiment Q: Ordinary benzenediazonium chloride is coupled quantitatively with phenol whose hydroxyl oxygen is labelled with \(^{18}\mathrm{O}\). Assume no oxygen-isotope exchange occurs during coupling.
Which statement correctly predicts the location of the labelled oxygen and the fate of the diazonium nitrogen atoms?
ⓐ. P forms unlabelled phenol and retains both diazonium nitrogen atoms; Q forms labelled phenol with nitrogen evolution.
ⓑ. P forms \(^{18}\mathrm{O}\)-labelled phenol with nitrogen evolution; Q forms an \(^{18}\mathrm{O}\)-labelled hydroxyazo compound retaining both diazonium nitrogen atoms.
ⓒ. P forms \(^{18}\mathrm{O}\)-labelled phenol retaining an azo linkage; Q forms an unlabelled hydroxyazo compound.
ⓓ. Both reactions introduce labelled oxygen from water and liberate the original diazonium nitrogen atoms as molecular nitrogen.
Correct Answer: P forms \(^{18}\mathrm{O}\)-labelled phenol with nitrogen evolution; Q forms an \(^{18}\mathrm{O}\)-labelled hydroxyazo compound retaining both diazonium nitrogen atoms.
Explanation: The two experiments involve different reaction classes of an aromatic diazonium salt.
Experiment P involves replacement of the diazonium group by hydroxyl.
Experiment Q involves azo coupling with an activated aromatic compound.
\(\textbf{Hydrolysis in labelled water:}\)
When benzenediazonium chloride undergoes hydrolysis, the diazonium group leaves and hydroxyl is introduced at the aromatic carbon.
The simplified reaction is:
\[
\mathrm{C_6H_5N_2^++H_2O\longrightarrow C_6H_5OH+N_2+H^+}
\]
Under the explicit isotope-tracing assumption, the oxygen atom of the newly formed phenolic hydroxyl group comes from water.
Therefore, using \(\mathrm{H_2^{18}O}\) produces phenol containing labelled oxygen.
The two diazonium nitrogen atoms leave as molecular nitrogen.
\(\textbf{Coupling with labelled phenol:}\)
In Experiment Q, phenol is already the oxygen-containing coupling component.
The electrophilic coupling reaction forms a new azo-linked aromatic structure without replacing the phenolic O–H group.
Therefore, the labelled oxygen originally present in phenol remains in the hydroxyazo product.
Both nitrogen atoms of the diazonium group are retained in the \(\mathrm{-N=N-}\) linkage.
The differing isotope locations follow from the source of the hydroxyl group in each reaction.
The result also distinguishes nitrogen-eliminating hydrolysis from nitrogen-retaining azo coupling.
Tracking atoms through the reaction is more reliable than assuming that every transformation of a diazonium salt has the same nitrogen balance.
294. Four substances are examined at 273–278 K.
| Sample | Structure or description | Treatment |
|---|
| P | \(\mathrm{C_6H_5NH_2}\) | \(\mathrm{NaNO_2/HCl}\) |
| Q | \(\mathrm{C_6H_5NHCH_3}\) | \(\mathrm{NaNO_2/HCl}\) |
| R | \(\mathrm{C_6H_5CH_2NH_2}\) | \(\mathrm{NaNO_2/HCl}\) |
| S | \(\mathrm{C_6H_5NH_3^+Cl^-}\) | \(\mathrm{NaNO_2/HCl}\), with sufficient reagent and appropriate reaction conditions |
Which statement correctly identifies the significance of the initial nitrogen substitution and protonation states?
ⓐ. Only P can ultimately form benzenediazonium chloride because the initially protonated nitrogen of S can never participate in diazotisation.
ⓑ. P and R form comparably stable cold arenediazonium salts because both molecules contain benzene rings.
ⓒ. P and S can furnish benzenediazonium chloride under suitable conditions; Q is secondary, while R gives an unstable aliphatic diazonium species.
ⓓ. Q and S form identical N-nitroso compounds because both initially contain at least one N–H bond.
Correct Answer: P and S can furnish benzenediazonium chloride under suitable conditions; Q is secondary, while R gives an unstable aliphatic diazonium species.
Explanation: The four samples differ either in nitrogen substitution or in the initial protonation state.
P is aniline, a primary aromatic amine.
It undergoes diazotisation in cold acidic nitrite solution to form benzenediazonium chloride.
Q is N-methylaniline, a secondary aromatic amine.
Its nitrogen possesses one phenyl group, one methyl group and one hydrogen.
It does not follow the ordinary primary-aromatic-amine diazotisation route.
Under suitable conditions, secondary amines can undergo N-nitrosation.
R is benzylamine, a primary amine whose nitrogen is bonded to a saturated methylene carbon.
Its diazonium intermediate is aliphatic and highly unstable.
S is anilinium chloride, the conjugate acid of aniline.
Protonation does not permanently change aniline into a secondary or tertiary amine.
Under suitable reaction conditions, the neutral and protonated forms participate in acid–base equilibrium.
The amino functionality can consequently undergo diazotisation in the appropriate acidic nitrite medium.
The distinction is between reversible protonation of a primary aromatic amine and covalent substitution that changes its degree.
Therefore, P and S can ultimately furnish the same arenediazonium cation despite having different initial protonation states.
The table must be interpreted using both direct aromatic attachment and nitrogen substitution degree.
295. A sample of aniline is diazotised using sodium nitrite in which the nitrogen atom is \(^{15}\mathrm{N}\)-labelled. The nitrogen atom initially present in aniline is ordinary \(^{14}\mathrm{N}\).
The resulting benzenediazonium chloride is divided into two portions.
Portion P is hydrolysed completely to phenol.
Portion Q undergoes complete azo coupling with phenol.
Assume no nitrogen-isotope exchange takes place.
Which statement correctly describes the isotope distribution?
ⓐ. Both portions release only \(^{14}\mathrm{N}_2\), because the nitrite nitrogen is removed before diazonium formation.
ⓑ. P releases nitrogen containing one \(^{14}\mathrm{N}\) and one \(^{15}\mathrm{N}\); Q retains these two differently labelled nitrogen atoms in its azo linkage.
ⓒ. P forms phenol containing a \(^{15}\mathrm{N}\) atom; Q releases nitrogen containing two \(^{14}\mathrm{N}\) atoms.
ⓓ. P releases only \(^{15}\mathrm{N}_2\); Q incorporates a new nitrogen atom from phenol into its azo linkage.
Correct Answer: P releases nitrogen containing one \(^{14}\mathrm{N}\) and one \(^{15}\mathrm{N}\); Q retains these two differently labelled nitrogen atoms in its azo linkage.
Explanation: Diazotisation combines nitrogen originally present in an aromatic primary amino group with nitrogen supplied by the nitrosating reagent.
The starting aniline contributes one nitrogen atom to the diazonium functionality.
The labelled sodium nitrite supplies the other nitrogen atom.
Under the stipulated absence of isotope exchange, the resulting benzenediazonium group contains one \(^{14}\mathrm{N}\) atom and one \(^{15}\mathrm{N}\) atom.
\(\textbf{Portion P — Hydrolytic replacement:}\)
Hydrolysis replaces the diazonium group with hydroxyl.
The two nitrogen atoms leave together as molecular nitrogen.
The nitrogen gas consequently contains one atom of each specified isotope.
The phenol product contains no nitrogen atom.
\(\textbf{Portion Q — Azo coupling:}\)
Azo coupling does not remove the two diazonium nitrogen atoms.
Instead, they form the azo linkage connecting the diazonium-derived aromatic ring to the phenolic coupling ring.
Both isotope labels are therefore retained within the organic product.
Phenol contributes the activated aromatic carbon framework and hydroxyl group, not an additional nitrogen atom.
The two experiments differ in the fate of the same labelled diazonium unit.
This is an atom-conservation distinction rather than a difference in the number of nitrogen atoms initially present.
The correct inference requires identifying the two nitrogen sources during diazotisation and then distinguishing displacement from coupling.
296. A sample containing \(0.075\,\mathrm{mol}\) of benzenediazonium tetrafluoroborate is heated under conditions giving quantitative formation of fluorobenzene, nitrogen and boron trifluoride.
The evolved \(\mathrm{BF_3}\) is passed into a separate vessel containing \(0.050\,\mathrm{mol}\) of dry triethylamine. Assume quantitative formation of a \(1:1\) Lewis acid–base adduct between \(\mathrm{BF_3}\) and triethylamine, with no competing reactions.
How many moles of the adduct are formed, and how many moles of \(\mathrm{BF_3}\) remain uncombined?
ⓐ. \(0.050\,\mathrm{mol}\) adduct and \(0.025\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
ⓑ. \(0.075\,\mathrm{mol}\) adduct and no uncombined \(\mathrm{BF_3}\)
ⓒ. \(0.025\,\mathrm{mol}\) adduct and \(0.050\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
ⓓ. \(0.050\,\mathrm{mol}\) adduct and \(0.075\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
Correct Answer: \(0.050\,\mathrm{mol}\) adduct and \(0.025\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
Explanation: Thermal decomposition of an aromatic diazonium tetrafluoroborate must be considered alongside Lewis acid–base adduct formation.
The first reaction determines the amount of boron trifluoride available.
The second reaction requires a separate limiting-reagent calculation.
\(\textbf{Stage 1 — Thermal decomposition:}\)
\[
\mathrm{C_6H_5N_2^+BF_4^-\xrightarrow{\Delta}C_6H_5F+N_2+BF_3}
\]
The stoichiometric ratio of diazonium tetrafluoroborate to boron trifluoride is \(1:1\).
\[
n_{\mathrm{BF_3,formed}}=0.075\,\mathrm{mol}
\]
\(\textbf{Stage 2 — Identify the electron-pair donor and acceptor:}\)
Boron trifluoride is electron deficient and acts as a Lewis acid.
Triethylamine is a tertiary amine containing an available nitrogen lone pair.
It acts as the Lewis base.
The stipulated reaction is:
\[
\mathrm{BF_3+(C_2H_5)_3N\longrightarrow (C_2H_5)_3N\!\rightarrow BF_3}
\]
One mole of triethylamine combines with one mole of boron trifluoride.
\(\textbf{Stage 3 — Find the limiting reagent:}\)
\[
n_{\mathrm{BF_3,available}}=0.075\,\mathrm{mol}
\]
\[
n_{\mathrm{amine,available}}=0.050\,\mathrm{mol}
\]
Triethylamine is limiting because fewer moles are available and the required ratio is \(1:1\).
\(\textbf{Amount of adduct formed:}\)
\[
n_{\mathrm{adduct}}=0.050\,\mathrm{mol}
\]
\(\textbf{Uncombined boron trifluoride:}\)
\[
n_{\mathrm{BF_3,remaining}}=0.075-0.050
\]
\[
n_{\mathrm{BF_3,remaining}}=0.025\,\mathrm{mol}
\]
\(\textbf{Bonding check:}\)
Triethylamine does not need an N–H bond to form this adduct.
Its nitrogen lone pair creates an N–B coordinate bond.
The process is different from protonation by hydrochloric acid, which introduces an N–H bond.
\(\textbf{Final answer:}\)
\[
\boxed{\left(n_{\mathrm{adduct}},n_{\mathrm{BF_3,remaining}}\right)=(0.050,\ 0.025)\,\mathrm{mol}}
\]
297. Benzenediazonium chloride is reduced to benzene using hypophosphorous acid, \(\mathrm{H_3PO_2}\), under suitable conditions.
During the process, hypophosphorous acid is oxidised to phosphorous acid, \(\mathrm{H_3PO_3}\).
Assume the reduction follows the idealised ionic equation:
\[
\mathrm{C_6H_5N_2^++H_3PO_2+H_2O\longrightarrow C_6H_6+N_2+H_3PO_3+H^+}
\]
Which statement correctly identifies the oxidation-state change of phosphorus and the electron transfer involved per mole of diazonium cation?
ⓐ. Phosphorus changes from \(+3\) to \(+1\), accepting two moles of electrons.
ⓑ. Phosphorus changes from \(+1\) to \(+5\), donating four moles of electrons.
ⓒ. Phosphorus changes from \(+1\) to \(+3\), donating two moles of electrons.
ⓓ. Phosphorus changes from \(+3\) to \(+5\), donating two moles of electrons.
Correct Answer: Phosphorus changes from \(+1\) to \(+3\), donating two moles of electrons.
Explanation: Hypophosphorous acid acts as a reducing agent during replacement of the aromatic diazonium group by hydrogen.
A reducing agent undergoes oxidation while supplying electrons to another reacting species.
The oxidation state of phosphorus can be determined from the molecular formulas.
\(\textbf{Phosphorus in hypophosphorous acid:}\)
Let the oxidation state of phosphorus be x.
Hydrogen is assigned \(+1\), while oxygen is assigned \(-2\).
\[
3(+1)+x+2(-2)=0
\]
\[
3+x-4=0
\]
\[
x=+1
\]
\(\textbf{Phosphorus in phosphorous acid:}\)
Let the new oxidation state be y.
\[
3(+1)+y+3(-2)=0
\]
\[
3+y-6=0
\]
\[
y=+3
\]
\(\textbf{Oxidation-state change:}\)
\[
\Delta(\mathrm{oxidation\ state})=+3-(+1)
\]
\[
=+2
\]
Phosphorus loses two electrons per phosphorus atom undergoing the stipulated oxidation.
\(\textbf{Oxidation half-reaction:}\)
\[
\mathrm{H_3PO_2+H_2O\longrightarrow H_3PO_3+2H^++2e^-}
\]
\(\textbf{Corresponding reduction half-reaction:}\)
\[
\mathrm{C_6H_5N_2^++H^++2e^-\longrightarrow C_6H_6+N_2}
\]
Adding these equations cancels the two electrons and gives the supplied overall ionic relation.
The electron transfer is therefore two moles of electrons per mole of diazonium cation converted through the idealised reaction.
The formation of benzene and nitrogen gas confirms that the diazonium group is removed rather than retained in an azo linkage.
\(\textbf{Final answer:}\)
\[
\boxed{\mathrm{P}:\ +1\longrightarrow+3,\qquad n_{e^-}=2\,\mathrm{mol\ per\ mol\ diazonium\ ion}}
\]
298. A solution containing \(0.040\,\mathrm{mol}\) of benzenediazonium chloride is treated with sufficient ethanol under conditions that quantitatively produce benzene, ethanal and nitrogen.
The ethanal formed is subsequently reacted completely with excess Tollens' reagent.
Assume each mole of ethanal reduces two moles of silver ions to metallic silver.
Given atomic mass of Ag = \(108\,\mathrm{g\,mol^{-1}}\).
What mass of metallic silver is deposited?
ⓐ. \(4.32\,\mathrm{g}\)
ⓑ. \(17.28\,\mathrm{g}\)
ⓒ. \(12.96\,\mathrm{g}\)
ⓓ. \(8.64\,\mathrm{g}\)
Correct Answer: \(8.64\,\mathrm{g}\)
Explanation: Ethanol acts as a reducing agent in the stipulated decomposition of benzenediazonium chloride.
It is oxidised to ethanal while the diazonium group is replaced by hydrogen.
The second stage uses the reducing properties of the aldehyde formed in the first reaction.
\(\textbf{Stage 1 — Reduction of the diazonium salt:}\)
\[
\mathrm{C_6H_5N_2^+Cl^-+C_2H_5OH\longrightarrow C_6H_6+CH_3CHO+N_2+HCl}
\]
The stoichiometric ratio of diazonium salt to ethanal is \(1:1\).
\[
n_{\mathrm{CH_3CHO}}=0.040\,\mathrm{mol}
\]
\(\textbf{Stage 2 — Oxidation of ethanal:}\)
Tollens' reagent oxidises the aldehyde functionality.
The carbonyl-derived organic product is the corresponding carboxylate under alkaline reaction conditions.
The stipulated electron-transfer ratio is:
\[
1\,\mathrm{mol\ aldehyde}\longrightarrow2\,\mathrm{mol\ Ag}
\]
\(\textbf{Amount of silver deposited:}\)
\[
n_{\mathrm{Ag}}=2n_{\mathrm{CH_3CHO}}
\]
\[
n_{\mathrm{Ag}}=2(0.040)
\]
\[
n_{\mathrm{Ag}}=0.080\,\mathrm{mol}
\]
\(\textbf{Mass of metallic silver:}\)
\[
m_{\mathrm{Ag}}=n_{\mathrm{Ag}}M_{\mathrm{Ag}}
\]
\[
m_{\mathrm{Ag}}=0.080\times108
\]
\[
m_{\mathrm{Ag}}=8.64\,\mathrm{g}
\]
\(\textbf{Chemical interpretation:}\)
The deposited silver provides evidence for formation of an aldehyde during oxidation of ethanol.
It does not imply that benzenediazonium chloride itself behaves as an aldehyde.
The benzene product retains the original aromatic carbon framework, while the ethanol carbon skeleton is retained in ethanal.
The silver yield is determined through the ethanal intermediate, not directly by treating the diazonium group as a Tollens-positive functional group.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{Ag}}=8.64\,\mathrm{g}}
\]
299. Three phenolic compounds are separately used as coupling components with benzenediazonium chloride under suitable conditions for ordinary ortho/para azo coupling.
P: 2,6-Dimethylphenol.
Q: 2,4-Dimethylphenol.
R: 2,4,6-Trimethylphenol.
Assume coupling occurs preferentially at an available ortho or para position relative to the phenolic hydroxyl group, and no displacement of existing methyl groups occurs.
Which statement correctly predicts the preferred positions?
ⓐ. P couples at an ortho position; Q couples at para; R couples at para.
ⓑ. P couples para; Q couples at an available ortho position; R has no free ortho/para coupling site.
ⓒ. P and Q both couple at para; R couples at meta because methyl groups become strong meta directors.
ⓓ. P has no available activated position; Q couples at para; R couples at ortho.
Correct Answer: P couples para; Q couples at an available ortho position; R has no free ortho/para coupling site.
Explanation: Phenol activates its benzene ring toward electrophilic substitution through oxygen lone-pair donation.
The positions ortho and para to the hydroxyl group are particularly favoured in ordinary azo coupling.
However, a preferred position must also be available for substitution.
\(\textbf{Compound P — 2,6-Dimethylphenol:}\)
Both positions ortho to hydroxyl are occupied by methyl groups.
The para position remains unoccupied.
Therefore, the stipulated ordinary coupling pathway favours the para position.
\(\textbf{Compound Q — 2,4-Dimethylphenol:}\)
One ortho position and the para position are occupied by methyl groups.
The other ortho position remains available.
Consequently, the stipulated ordinary coupling reaction can occur at the available ortho position.
\(\textbf{Compound R — 2,4,6-Trimethylphenol:}\)
Both ortho positions and the para position are occupied.
There is no unoccupied position among the normally preferred ortho/para coupling sites.
Therefore, R cannot follow the stipulated ordinary ortho/para coupling pathway without additional chemistry.
This does not amount to a universal claim that R is incapable of every possible electrophilic reaction under every condition.
The problem explicitly excludes displacement of methyl groups and alternative pathways.
The comparison shows that the directing influence of hydroxyl must be combined with actual site availability.
A group being ortho/para directing does not guarantee that para substitution is possible when para carbon already bears another substituent.
300. A chemist wishes to prepare 4-iodobenzoic acid from 4-methylaniline while preserving the para relationship between the two substituent positions.
The following operations are available:
P: Diazotisation using \(\mathrm{NaNO_2/HCl}\) at 273–278 K.
Q: Replacement of the diazonium group using potassium iodide.
R: Oxidation of the aromatic methyl side chain to a carboxylic acid group using suitable hot alkaline potassium permanganate, followed by acidification.
Assume the aromatic C–I bond remains unchanged during the stipulated side-chain oxidation.
Which sequence is appropriate?
ⓐ. R → P → Q; the carboxylic acid is formed before the diazonium intermediate.
ⓑ. P → R → Q; heating the diazonium intermediate preserves its cold-solution stability.
ⓒ. Q → P → R; iodide first converts the primary aromatic amino group into a diazonium salt.
ⓓ. P → Q → R; diazonium replacement installs iodine before the methyl group is oxidised.
Correct Answer: P → Q → R; diazonium replacement installs iodine before the methyl group is oxidised.
Explanation: The target molecule contains iodine and a carboxylic acid group at para positions on the benzene ring.
The starting compound contains a primary aromatic amino group and a methyl group at the corresponding positions.
The desired synthesis must replace the amino-derived substituent with iodine and convert the methyl side chain into a carboxyl group.
\(\textbf{First operation — Diazotisation:}\)
The primary aromatic amino group of 4-methylaniline is converted into a diazonium group using sodium nitrite and hydrochloric acid at 273–278 K.
The methyl substituent remains attached at the para position.
\(\textbf{Second operation — Introduction of iodine:}\)
Potassium iodide replaces the diazonium group with iodine.
Molecular nitrogen is liberated.
The organic product is 4-iodotoluene.
The newly introduced iodine occupies the aromatic position originally bearing the amino group.
\(\textbf{Third operation — Side-chain oxidation:}\)
Under the stipulated oxidation conditions, the methyl group attached to benzene is converted into a carboxylic acid group.
\[
\mathrm{4\!-\!IC_6H_4CH_3\xrightarrow[\text{then }H^+]{KMnO_4/OH^-,\ \Delta}4\!-\!IC_6H_4COOH}
\]
The aromatic carbon–iodine bond is preserved by the problem's explicit condition.
The final product is 4-iodobenzoic acid.
\(\textbf{Why the order matters:}\)
The diazonium intermediate is prepared and used under suitably cold conditions.
Subjecting it prematurely to a strongly heated oxidation step would not preserve the intended cold diazonium intermediate.
The proposed sequence therefore completes the diazonium replacement before applying the hot side-chain oxidation.
The route combines functional-group interconversion with preservation of aromatic substitution positions.