Organic Compounds Containing Nitrogen MCQs With Answers – Part 3 (NEET Chemistry)
GKaim: Measure | Improve | Achieve

Organic Compounds Containing Nitrogen MCQs with Answers – Part 3 (NEET Chemistry)

Timer: Off
Random: Off

201. Aniline is first treated with ethanoyl chloride and pyridine to produce acetanilide. The isolated acetanilide is divided into three portions. Portion P is subjected directly to the carbylamine test. Portion Q is hydrolysed completely and the resulting organic product is liberated from its salt before the carbylamine test. Portion R is reduced completely with \(\mathrm{LiAlH_4}\), followed by hydrolytic work-up, and its organic product is subjected to the carbylamine test. Which statement is correct?
ⓐ. All three portions give positive carbylamine tests because each product contains nitrogen.
ⓑ. P and R give positive tests, whereas Q gives a negative test.
ⓒ. Only Q gives a positive test because hydrolysis regenerates the primary amino group, while reduction produces a secondary amine.
ⓓ. Q and R both give positive tests because both hydrolysis and amide reduction remove the acetyl carbon atoms.
202. Two substituted anilines P and Q have their aqueous basicities compared. P contains a para-methyl group, while Q contains a para-nitro group. The student proposes the following conclusions. Statement I: The para-methyl group generally increases electron density and can favour the basicity of P relative to unsubstituted aniline. Statement II: The para-nitro group withdraws electron density and generally weakens the basicity of Q relative to aniline. Statement III: The stronger base must always undergo electrophilic aromatic substitution faster under any acidic reaction conditions because basicity and ring activation are identical properties. Statement IV: Strongly acidic conditions can protonate the amino group and change its directing influence during aromatic substitution. Which combination is correct?
ⓐ. I, II and III only
ⓑ. II, III and IV only
ⓒ. I, III and IV only
ⓓ. I, II and IV only
203. A compound X has the structure \(\mathrm{CH_3CH_2NHCH_2CH_2OH}\). It is treated first with sufficient ethanoyl chloride and pyridine under conditions that selectively N-acetylate the secondary amino group while leaving the hydroxyl group unchanged. The resulting amide is then reduced completely with \(\mathrm{LiAlH_4}\) in dry ether, followed by hydrolytic work-up. Assume the hydroxyl-containing carbon framework remains unchanged during both stages. Which statement correctly identifies the final nitrogen-containing product?
ⓐ. \(\mathrm{CH_3CH_2NHCH_2CH_2OH}\), a secondary amine
ⓑ. \(\mathrm{(CH_3CH_2)_2NCH_2CH_2OH}\), a tertiary amine
ⓒ. \(\mathrm{CH_3N(CH_2CH_2OH)_2}\), a tertiary amine
ⓓ. \(\mathrm{CH_3CH_2N(CH_3)CH_2CH_2OH}\), a tertiary amine
204. A chemist compares three nitrogen-containing compounds under identical qualitative conditions: P: N-Methylaniline Q: N-Phenylethanamide R: N,N-Dimethylaniline The following conclusions are proposed. Statement I: P contains a secondary aromatic amino group and can undergo ordinary N-acylation through replacement of an N–H hydrogen. Statement II: Q contains an amide nitrogen, whose lone-pair availability is substantially reduced through carbonyl conjugation. Statement III: R can undergo protonation and suitable quaternisation despite possessing no N–H bond. Statement IV: All three compounds must have identical aromatic ring activation because each contains nitrogen directly bonded to a phenyl group. Statement V: Only Q must give a positive carbylamine test because an amide nitrogen is directly attached to a carbonyl carbon. Which combination is correct?
ⓐ. I, II and IV only
ⓑ. II, III and V only
ⓒ. I, II and III only
ⓓ. I, III and V only
205. Aqueous methanamine is added gradually to a solution of ferric chloride. A reddish-brown precipitate appears. In a separate experiment, methanaminium chloride is added to another portion of ferric chloride solution without adding any alkali. Consider the following statements. Statement I: Methanamine can accept a proton from water, increasing the concentration of hydroxide ions. Statement II: The reddish-brown precipitate is hydrated ferric oxide, commonly represented as \(\mathrm{Fe(OH)_3}\). Statement III: Methanaminium chloride must produce the same precipitate because it contains the same carbon–nitrogen framework as methanamine. Statement IV: The observation with methanamine demonstrates its basic character rather than a direct replacement of chloride by an amino group. Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, II and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
206. A solution contains \(0.180\,\mathrm{mol}\) of methanamine. It is mixed with a solution containing \(0.080\,\mathrm{mol}\) of ferric chloride. Assume that methanamine is the only source of hydroxide ions, that ferric hydroxide precipitation is quantitative, and that three moles of methanamine are required per mole of ferric hydroxide formed. Given: Molar mass of \(\mathrm{Fe(OH)_3}=107\,\mathrm{g\,mol^{-1}}\). What is the mass of ferric hydroxide precipitated?
ⓐ. \(6.42\,\mathrm{g}\)
ⓑ. \(8.56\,\mathrm{g}\)
ⓒ. \(5.35\,\mathrm{g}\)
ⓓ. \(4.28\,\mathrm{g}\)
207. An unknown aqueous solution X contains one of the following nitrogen-containing species: P: Methanamine Q: Methanaminium chloride R: N-Methylmethanamine S: N,N-Dimethylmethanamine The solution is found to be basic and gives a reddish-brown precipitate on addition of ferric chloride under suitable conditions. Which conclusion is justified by this observation alone?
ⓐ. X must be methanamine because only primary amines can produce hydroxide ions in water.
ⓑ. X must be N,N-dimethylmethanamine because tertiary amines are the only amines that react with ferric chloride.
ⓒ. X must be a secondary amine because ferric hydroxide precipitation requires exactly one nitrogen-bound hydrogen atom.
ⓓ. The observation supports the presence of a sufficiently basic free amine but does not uniquely distinguish primary, secondary and tertiary amines.
208. An organic mixture contains aniline, phenol and toluene dissolved in ether. The following separation sequence is proposed: Stage I: Extract the mixture with dilute aqueous hydrochloric acid and separate the aqueous layer. Stage II: Extract the remaining ether layer with aqueous sodium hydroxide and separate the new aqueous layer. Stage III: Regenerate the neutral organic compounds from the two aqueous extracts using appropriate acid–base work-up. Which statement correctly identifies the principal component separated during each extraction?
ⓐ. HCl extracts phenol first; NaOH subsequently extracts aniline; toluene remains in ether.
ⓑ. HCl extracts aniline first; NaOH subsequently extracts phenol; toluene remains in ether.
ⓒ. HCl extracts toluene first; NaOH subsequently extracts aniline; phenol remains in ether.
ⓓ. HCl extracts both aniline and phenol as ammonium salts; NaOH subsequently extracts toluene.
209. Two samples containing the same amount of aniline are treated differently. Sample P is dissolved in water and acidified with sufficient hydrochloric acid. Sample Q is dissolved in a nonaqueous solvent and treated with benzoyl chloride in the presence of pyridine. The resulting nitrogen-containing products are isolated. Which statement correctly compares their nitrogen lone-pair environments and the possibility of regenerating aniline?
ⓐ. Both products contain an amide carbonyl group and require complete amide hydrolysis for regeneration.
ⓑ. P is anilinium chloride, reversed by deprotonation; Q is benzanilide, reversed by N-benzoyl cleavage.
ⓒ. P contains benzanilide and can regenerate aniline with sodium hydroxide through simple deprotonation; Q contains anilinium chloride.
ⓓ. Both products are neutral amines because aniline cannot undergo covalent acylation at nitrogen.
210. Three molecules contain an amino nitrogen attached to a carbon framework: P: \(\mathrm{CH_3NH_2}\) Q: \(\mathrm{CF_3CH_2NH_2}\) R: \(\mathrm{CH_3CH_2NH_2}\) Assume the comparison is restricted to the inductive effects of the substituents, without making an unsupported exact aqueous basicity ranking. Which statement correctly interprets their electronic influences?
ⓐ. Q's trifluoromethyl-containing group withdraws inductively, unlike the generally electron-releasing alkyl groups in P and R.
ⓑ. The fluorine atoms in Q necessarily make nitrogen more electron rich because fluorine contains lone pairs.
ⓒ. All three carbon-containing substituents exert identical inductive effects because each amino group is primary.
ⓓ. The ethyl group in R withdraws electron density more strongly than the trifluoromethyl-containing group in Q because it contains more carbon atoms.
211. Consider the following sequence beginning with methanamine: \[ \mathrm{CH_3NH_2\xrightarrow{CH_3COCl/pyridine}P \xrightarrow[\text{work-up}]{LiAlH_4}Q} \] The product Q is then treated with nitrous acid under suitable conditions for its amine class. Which statement correctly describes the transformation and the characteristic nitrous-acid product?
ⓐ. Q is ethanamine and liberates nitrogen with ethanol formation.
ⓑ. Q is N-methylethanamine and can form an N-nitroso derivative.
ⓒ. Q is trimethylamine and produces an arenediazonium salt.
ⓓ. Q is methanamine and undergoes quantitative nitrogen evolution.
212. A diprotic nitrogen-containing base B possesses two protonatable nitrogen centres. For this question, the successive conjugate-acid pKa values are supplied as: \[ \mathrm{p}K_{a1}=6.0,\qquad \mathrm{p}K_{a2}=10.0 \] where the dominant equilibria are: \[ \mathrm{BH_2^{2+}\rightleftharpoons BH^++H^+} \] \[ \mathrm{BH^+\rightleftharpoons B+H^+} \] A buffered solution is maintained at pH 8.0. Assume ideal equilibrium behaviour. Which nitrogen-containing form predominates?
ⓐ. \(\mathrm{BH_2^{2+}}\), because the solution is acidic relative to pH 14
ⓑ. Equal amounts of all three forms, because two ionisation equilibria are present
ⓒ. \(\mathrm{B}\), because pH 8.0 is above neutral pH
ⓓ. \(\mathrm{BH^+}\), because pH 8.0 lies between the two successive pKa values
213. A student proposes three chemical methods for distinguishing aniline from phenol in separate pure samples. Method P: Treatment with dilute aqueous hydrochloric acid followed by testing for formation of an aqueous ionic salt. Method Q: Treatment with aqueous sodium hydroxide followed by testing for formation of an aqueous ionic salt. Method R: Treatment with chloroform and ethanolic potassium hydroxide on heating. Which conclusion correctly compares their distinguishing principles?
ⓐ. P relies on aniline's basicity, Q relies on phenol's acidity, and R relies on aniline's primary-amine character.
ⓑ. P relies on phenol's basicity, Q relies on aniline's acidity, and R relies on phenol's primary-amine character.
ⓒ. All three methods distinguish the compounds exclusively through electrophilic aromatic substitution.
ⓓ. P and Q are ineffective because aniline and phenol contain the same number of aromatic carbon atoms.
214. An unknown compound X has one nitrogen atom and the molecular formula \(\mathrm{C_3H_9N}\). It does not undergo the ordinary carbylamine reaction. Treatment with benzenesulphonyl chloride gives no corresponding neutral sulphonamide. However, X reacts quantitatively with one mole of methyl iodide per mole of X to form an ammonium salt containing four nitrogen–carbon bonds. Which structure is X?
ⓐ. \(\mathrm{CH_3CH_2CH_2NH_2}\)
ⓑ. \(\mathrm{CH_3CH_2NHCH_3}\)
ⓒ. \(\mathrm{(CH_3)_3N}\)
ⓓ. \(\mathrm{CH_3CH(NH_2)CH_3}\)
215. A neutral organic compound contains a primary aromatic amino group and a carboxylic acid group attached to the same benzene ring. It is subjected separately to the following treatments: P: Dilute aqueous hydrochloric acid. Q: Aqueous sodium hydroxide. R: Ethanoyl chloride in the presence of pyridine under conditions favouring N-acylation. Which statement correctly identifies the functional-group changes?
ⓐ. P can protonate the amino group, Q can deprotonate the carboxyl group, and R can convert the primary amino group into an N-acyl derivative.
ⓑ. P must convert the carboxyl group into an ester, Q must convert the amino group into a diazonium group, and R must remove both nitrogen atoms.
ⓒ. P converts the aromatic amino group into a tertiary amine, Q removes the carboxyl carbon, and R gives an ordinary ammonium chloride.
ⓓ. P and Q can only affect the benzene ring, whereas R acts exclusively on the carboxylic acid proton.
216. Three neutral nitrogen-containing compounds are represented by: P: \(\mathrm{C_6H_5NH_2}\) Q: \(\mathrm{C_6H_5NHCOCH_3}\) R: \(\mathrm{C_6H_5N(CH_3)_2}\) A chemist wishes to distinguish the consequences of three different interactions involving the nitrogen lone pair: (i) direct nitrogen-to-ring conjugation; (ii) competing nitrogen-to-carbonyl conjugation; (iii) protonation of an N–H-free aromatic tertiary amine. Which matching is correct?
ⓐ. (i) Q, (ii) R, (iii) P
ⓑ. (i) R, (ii) P, (iii) Q
ⓒ. (i) P, (ii) Q, (iii) R
ⓓ. (i) P, (ii) R, (iii) Q
217. Two primary amines P and Q have the same molecular formula, \(\mathrm{C_4H_{11}N}\). P is butan-1-amine, while Q is 2-methylpropan-2-amine. A student argues that Q must be a tertiary amine because its amino group is attached to a tertiary carbon atom. Consider the following statements. Statement I: Both P and Q are primary amines because their nitrogen atoms each have only one carbon-containing substituent. Statement II: The carbon atom attached to nitrogen in Q is tertiary. Statement III: Q cannot give a carbylamine reaction because its amino-bearing carbon is tertiary. Statement IV: The different degrees of the amino-bearing carbons do not change the primary classification of their nitrogen atoms. Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, II and III only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
218. An organic mixture contains a neutral tertiary amine P and a quaternary ammonium chloride Q. P has the structure \(\mathrm{(CH_3)_3N}\), whereas Q has the formula \(\mathrm{[(CH_3)_4N]^+Cl^-}\). Each is treated separately with sufficient aqueous sodium hydroxide at room temperature under ordinary acid–base conditions. Which statement correctly distinguishes the expected nitrogen-containing species?
ⓐ. Both give trimethylamine because hydroxide removes one methyl group from every positively charged nitrogen centre.
ⓑ. P becomes tetramethylammonium hydroxide, whereas Q becomes trimethylamine.
ⓒ. P remains the neutral tertiary amine, while Q does not undergo simple N–H deprotonation because it has no nitrogen-bound hydrogen.
ⓓ. Both give methylamine because sodium hydroxide converts tertiary and quaternary nitrogen centres into primary amines.
219. An unknown neutral nitrogen-containing compound X possesses one nitrogen atom and has molecular formula \(\mathrm{C_4H_{11}N}\). Its observations are: (i) It gives a negative carbylamine reaction. (ii) It reacts with benzenesulphonyl chloride to produce a neutral sulphonamide insoluble in aqueous sodium hydroxide. (iii) Its nitrogen is attached to two identical alkyl groups. Which compound satisfies all the observations?
ⓐ. Butan-2-amine
ⓑ. N-Methylpropan-2-amine
ⓒ. N,N-Dimethylethanamine
ⓓ. N-Ethylethanamine
220. Three compounds have the same molecular formula, \(\mathrm{C_8H_{11}N}\): P: \(\mathrm{C_6H_5CH_2CH_2NH_2}\) Q: \(\mathrm{C_6H_5CH_2NHCH_3}\) R: \(\mathrm{C_6H_5NHCH_2CH_3}\) Each is subjected separately to the carbylamine test and to treatment with nitrous acid under conditions appropriate for its amine class. Which statement correctly compares their structures and characteristic reactions?
ⓐ. P and Q are primary aliphatic amines, while R is a secondary aromatic amine.
ⓑ. All three give stable arenediazonium salts at 273–278 K because their molecular structures contain benzene rings.
ⓒ. Only R gives a positive carbylamine reaction because its nitrogen is attached directly to the aromatic ring.
ⓓ. P is a primary aralkyl amine capable of nitrogen evolution with nitrous acid; Q and R are secondary amines capable of N-nitrosation under suitable conditions.
221. The four primary amines having molecular formula \(\mathrm{C_4H_{11}N}\) are considered: P: Butan-1-amine Q: Butan-2-amine R: 2-Methylpropan-1-amine S: 2-Methylpropan-2-amine Which statement correctly identifies the compound that contains a stereogenic carbon atom and explains its compatibility with the carbylamine test?
ⓐ. Q alone contains a stereogenic carbon, and it can give a positive carbylamine reaction because its nitrogen is primary.
ⓑ. P and Q both contain stereogenic carbons because their nitrogen atoms are bonded to unbranched carbon chains.
ⓒ. S alone contains a stereogenic carbon, but it cannot give a carbylamine reaction because its amino-bearing carbon is tertiary.
ⓓ. R and S both contain stereogenic carbons, and only R can give a positive carbylamine reaction.
222. Three aromatic primary amines are compared: P: Aniline Q: 3-Methoxyaniline R: 4-Methoxyaniline The methoxy group can withdraw electron density inductively while donating electron density through resonance when an appropriate conjugative pathway exists. Which statement is most consistent with these electronic effects under ordinary comparable aqueous conditions?
ⓐ. Q and R must have identical basic strengths because both contain the same methoxy substituent.
ⓑ. Q must be more basic than R because the meta position allows stronger direct resonance donation from methoxy toward the amino group.
ⓒ. R can be more basic than P through para resonance donation, whereas Q does not receive the same direct para-resonance benefit and can be weaker than P.
ⓓ. Both Q and R must be more basic than P because the inductive effect of oxygen is always electron releasing.
223. Two aqueous solutions are prepared at the same temperature. Solution P contains anilinium chloride, whose conjugate acid has \(\mathrm{p}K_a=4.62\). Solution Q contains ethanamine, whose conjugate acid, ethanaminium ion, has \(\mathrm{p}K_a=10.71\). The solutions are mixed so that the following proton-transfer equilibrium can occur: \[ \mathrm{C_6H_5NH_3^++C_2H_5NH_2\rightleftharpoons C_6H_5NH_2+C_2H_5NH_3^+} \] Given \(10^{0.09}\approx1.23\), what is the approximate equilibrium constant for the reaction as written?
ⓐ. \(8.1\times10^{-7}\)
ⓑ. \(1.23\times10^{-6}\)
ⓒ. \(8.1\times10^5\)
ⓓ. \(1.23\times10^6\)
224. The following nitrogen centres are described: P: Nitrogen in neutral trimethylamine, \(\mathrm{(CH_3)_3N}\). Q: Nitrogen in trimethylammonium ion, \(\mathrm{[(CH_3)_3NH]^+}\). R: Nitrogen in N,N-dimethylethanamide, \(\mathrm{CH_3CON(CH_3)_2}\). Which statement correctly compares the electron-pair arrangements and structural consequences?
ⓐ. P and Q both contain one free nitrogen lone pair, while R contains no nitrogen–carbon bond.
ⓑ. P is pyramidal with a lone pair; Q has four sigma bonds around nitrogen; R has an amide nitrogen whose bonding is influenced by carbonyl conjugation.
ⓒ. P is trigonal planar because it has three methyl groups, while Q and R are both ordinary pyramidal tertiary amines.
ⓓ. All three have identical nitrogen geometry because nitrogen is bonded to three carbon atoms in every structure.
225. Two compounds are represented by the following systematic names: P: N-Ethyl-3-methylbutan-2-amine Q: N,N-Dimethylpentan-2-amine Which statement correctly compares their molecular formulas and nitrogen substitution degrees?
ⓐ. P contains seven carbon atoms and Q contains six, while both are secondary.
ⓑ. P and Q both have molecular formula \(\mathrm{C_6H_{15}N}\), but P is primary and Q is secondary.
ⓒ. P contains six carbon atoms and Q contains seven, while both are tertiary.
ⓓ. P and Q both have molecular formula \(\mathrm{C_7H_{17}N}\), but P is secondary and Q is tertiary.
226. A molecule contains two nitrogen atoms in the following groups: P: \(\mathrm{-NHCOCH_3}\), attached directly to an aromatic carbon. Q: \(\mathrm{-CH_2N(CH_3)_2}\), attached to the same aromatic ring through the methylene carbon. A student proposes that treatment with dilute hydrochloric acid must protonate P preferentially because P contains an N–H bond while Q does not. Which statement correctly evaluates the proposal?
ⓐ. It is correct because an N–H bond is required for proton acceptance.
ⓑ. It is correct because the carbonyl group increases the ordinary basicity of amide nitrogen.
ⓒ. It is incorrect: Q retains a basic tertiary-amine lone pair, whereas P is an amide with a resonance-delocalised nitrogen lone pair.
ⓓ. It is incorrect because neither nitrogen centre can be protonated under any conditions.
227. A colourless liquid X has molecular formula \(\mathrm{C_5H_{13}N}\) and is a saturated acyclic tertiary amine. Its nitrogen is bonded to exactly one propan-1-yl group and two methyl groups. A second liquid Y has the same molecular formula and is also a tertiary amine, but its nitrogen is bonded to one propan-2-yl group and two methyl groups. Which statement correctly compares X and Y?
ⓐ. X and Y are identical because both have five carbon atoms and a tertiary amino group.
ⓑ. X is N,N-dimethylpropan-1-amine, whereas Y is N,N-dimethylpropan-2-amine.
ⓒ. X is a secondary amine, whereas Y is a tertiary amine.
ⓓ. X is N,N-dimethylpropan-2-amine, whereas Y is N,N-dimethylpropan-1-amine.
228. A solution containing equimolar amounts of aniline and ethanamine is treated with a carefully controlled quantity of a strong acid so that the solution remains within a pH region where aniline is predominantly neutral but ethanamine is predominantly protonated. Given: \[ \mathrm{p}K_a(\text{anilinium})=4.62 \] \[ \mathrm{p}K_a(\text{ethanaminium})=10.71 \] Which pH interval most naturally supports this condition?
ⓐ. pH between 1.0 and 3.0
ⓑ. pH between 5.5 and 9.5
ⓒ. pH between 12.0 and 14.0
ⓓ. pH between 9.5 and 12.0
229. A student claims that a tertiary amine must have an approximately tetrahedral molecular shape around nitrogen because the nitrogen atom is ordinarily described as \(sp^3\) hybridised. Consider the following statements. Statement I: In a neutral tertiary aliphatic amine, nitrogen has three sigma bonds and one lone pair. Statement II: The arrangement of electron-pair regions around nitrogen is approximately tetrahedral, but the arrangement of the three bonded atoms is pyramidal. Statement III: Protonation can replace the lone-pair region with an additional N–H bonding region. Statement IV: The presence of four electron-pair regions requires four atoms to be bonded directly to nitrogen in every neutral amine. Which combination is correct?
ⓐ. I, II and IV only
ⓑ. I, III and IV only
ⓒ. I, II and III only
ⓓ. II, III and IV only
230. The following two neutral compounds are structural isomers: P: \(\mathrm{C_6H_5NHCH_2CH_3}\) Q: \(\mathrm{C_6H_5CH_2NHCH_3}\) They are subjected separately to controlled N-acetylation, followed by complete reduction of the resulting amides using \(\mathrm{LiAlH_4}\). Which statement correctly predicts the connectivity of the final nitrogen-containing products?
ⓐ. Both routes give the same tertiary amine because the starting compounds have the same molecular formula.
ⓑ. P gives \(\mathrm{C_6H_5N(C_2H_5)_2}\), while Q gives \(\mathrm{C_6H_5CH_2N(CH_3)(C_2H_5)}\).
ⓒ. P gives \(\mathrm{C_6H_5CH_2N(C_2H_5)_2}\), while Q gives \(\mathrm{C_6H_5N(CH_3)(C_2H_5)}\).
ⓓ. Both routes regenerate their original secondary amines because amide reduction removes the acetyl group.
231. A sample of aniline is subjected separately to the following electronic modifications: P: Protonation to form anilinium ion. Q: Acetylation to form acetanilide. R: Conversion of the amino group into N,N-dimethylamino functionality without quaternisation. Which statement correctly identifies the nitrogen lone-pair situation relevant to aromatic substitution?
ⓐ. P and Q retain identical strong nitrogen lone-pair donation into the ring, while R lacks a lone pair.
ⓑ. Q becomes a quaternary ammonium compound, while P and R remain primary aromatic amines.
ⓒ. P and R both lack a nitrogen lone pair because both contain more than two nitrogen sigma bonds.
ⓓ. P has no free N lone pair; Q has a lone pair delocalised toward carbonyl; R retains a lone pair that can donate into the ring.
232. Piperazine contains two secondary amino nitrogen atoms in a saturated six-membered ring. Morpholine contains one secondary amino nitrogen and one oxygen atom in a saturated six-membered ring. Both compounds are treated separately with excess benzoyl chloride in the presence of pyridine under conditions allowing complete ordinary N-benzoylation. Which statement correctly compares the maximum number of benzoyl groups introduced per molecule?
ⓐ. Piperazine can introduce two benzoyl groups, whereas morpholine can introduce one.
ⓑ. Piperazine can introduce one benzoyl group, whereas morpholine can introduce two.
ⓒ. Both can introduce two benzoyl groups because each ring contains two heteroatoms.
ⓓ. Neither can introduce a benzoyl group because cyclic secondary amines lack N–H bonds.
233. Three aromatic amino compounds have the following structures: P: \(\mathrm{4\!-\!CH_3C_6H_4NH_2}\) Q: \(\mathrm{4\!-\!NO_2C_6H_4NH_2}\) R: \(\mathrm{4\!-\!CH_3C_6H_4NHCOCH_3}\) A student compares the electronic influences of their ring substituents and nitrogen functionalities. Which statement is correct?
ⓐ. P and Q contain identical electron-releasing para substituents, while R contains a free primary amino group.
ⓑ. Q is expected to be more basic than P because the para nitro group strongly withdraws electron density.
ⓒ. P is a para-methyl-substituted primary aromatic amine, Q a para-nitro-substituted primary aromatic amine, and R an N-acylated derivative.
ⓓ. R is an ordinary tertiary aromatic amine because its nitrogen is bonded to an aromatic group and an acetyl group.
234. A mixture contains two different amines, P and Q, with the following structures: P: \(\mathrm{C_6H_5NH_2}\) Q: \(\mathrm{C_6H_5CH_2N(CH_3)_2}\) A sample is treated with excess hydrochloric acid and then with sufficient aqueous sodium hydroxide to regenerate the neutral compounds. A second sample undergoes the carbylamine reaction. A third sample undergoes ordinary N-acetylation with ethanoyl chloride and pyridine. Which statement correctly combines the three observations?
ⓐ. Both form salts with HCl; only P gives a carbylamine test and ordinary neutral N-acetylation.
ⓑ. Only P forms an ammonium salt, while both compounds give positive carbylamine reactions.
ⓒ. Both compounds give positive carbylamine reactions, but only Q undergoes N-acetylation.
ⓓ. Q cannot form an ammonium salt because its nitrogen has no N–H bond, while P cannot undergo N-acetylation because it is aromatic.
235. An organic reaction is carried out using ethyl benzoate and methanamine under conditions that allow complete aminolysis of the ester. In a separate experiment, methanamine is treated with benzoic acid at room temperature. Which statement correctly identifies the principal products and distinguishes the two transformations?
ⓐ. Ethyl benzoate gives N-methylbenzamide and ethanol, whereas benzoic acid principally forms methanaminium benzoate at room temperature.
ⓑ. Ethyl benzoate gives benzylamine and ethanol, whereas benzoic acid gives N-methylbenzamide directly at room temperature.
ⓒ. Ethyl benzoate gives N-ethylbenzamide and methanol, whereas benzoic acid produces benzylamine.
ⓓ. Both reagents give N-methylbenzamide because esters and carboxylic acids undergo identical reactions with methanamine at room temperature.
236. Methyl ethanoate is reacted completely with diethylamine under suitable ester-aminolysis conditions to form compound P. The isolated P is reduced completely with \(\mathrm{LiAlH_4}\) in dry ether, followed by hydrolytic work-up, to form Q. Which statement correctly identifies P, Q and the fate of the methoxy group originally present in the ester?
ⓐ. P is N-ethylethanamide; Q is diethylamine; the methoxy carbon becomes part of Q.
ⓑ. P is diethylammonium ethanoate; Q is triethylamine; the methoxy carbon becomes an additional nitrogen-bound methyl group.
ⓒ. P is N,N-diethylmethanamide; Q is N,N-dimethylethanamine; the methoxy group remains bonded to nitrogen.
ⓓ. P is N,N-diethylethanamide; Q is triethylamine; the methoxy portion is released as methanol during aminolysis.
237. Equal analytical concentrations of aniline and ethanamine are present in a buffered aqueous solution at pH 7.00 and \(25^\circ\mathrm{C}\). The conjugate-acid pKa values are: \[ \mathrm{p}K_a(\text{anilinium})=4.62 \] \[ \mathrm{p}K_a(\text{ethanaminium})=10.71 \] For an amine B, the fraction present as the neutral free base is: \[ f_B=\frac{1}{1+10^{\mathrm{p}K_a-\mathrm{pH}}} \] Using \(10^{3.71}\approx5.13\times10^3\) and \(10^{-2.38}\approx0.00417\), what is the approximate ratio of the neutral free-base concentrations? \[ \frac{[\text{neutral aniline}]}{[\text{neutral ethanamine}]} \]
ⓐ. \(1.95\times10^{-4}\)
ⓑ. \(2.39\times10^2\)
ⓒ. \(5.11\times10^3\)
ⓓ. \(1.00\)
238. Consider all distinct saturated acyclic secondary monoamines having molecular formula \(\mathrm{C_5H_{13}N}\). A simple secondary amine has two identical alkyl groups attached to nitrogen, whereas a mixed secondary amine has two different alkyl groups. Which statement correctly gives the number of distinct secondary-amine constitutional isomers and the number of simple secondary amines among them?
ⓐ. Six constitutional isomers, none of which is simple
ⓑ. Five constitutional isomers, one of which is simple
ⓒ. Seven constitutional isomers, two of which are simple
ⓓ. Six constitutional isomers, two of which are simple
239. Piperazine is a saturated six-membered heterocycle containing two secondary amino nitrogen atoms at opposite positions in the ring. A sample is treated with one equivalent of benzoyl chloride under controlled conditions that give only the monobenzoylated product P, without unreacted piperazine or dibenzoylated material. P is then treated with dilute hydrochloric acid. Which statement correctly describes the two nitrogen atoms of P?
ⓐ. Both nitrogens are converted into tertiary amines, so neither can be protonated.
ⓑ. One nitrogen becomes part of an amide, while the other remains a secondary amino nitrogen capable of protonation.
ⓒ. One nitrogen becomes quaternary ammonium nitrogen, while the other becomes primary.
ⓓ. Both nitrogen atoms remain secondary amines because attaching a benzoyl group cannot change nitrogen functionality.
240. Two saturated diamines are separately subjected to exhaustive N-methylation with methyl iodide under conditions permitting all necessary deprotonation steps. P is ethane-1,2-diamine, \(\mathrm{H_2NCH_2CH_2NH_2}\). Q is piperazine, a six-membered saturated ring containing two secondary amino nitrogen atoms. Each sample contains \(0.050\,\mathrm{mol}\) of the respective diamine. Assume complete conversion of both nitrogen atoms of every molecule into quaternary ammonium centres, with one methyl iodide molecule consumed for each newly introduced N-methyl group. How many moles of methyl iodide are required for the two samples combined?
ⓐ. \(0.300\,\mathrm{mol}\)
ⓑ. \(0.400\,\mathrm{mol}\)
ⓒ. \(0.500\,\mathrm{mol}\)
ⓓ. \(0.600\,\mathrm{mol}\)
241. A sample contains \(0.080\,\mathrm{mol}\) of ethanaminium chloride, \(\mathrm{[C_2H_5NH_3]^+Cl^-}\). It is heated with chloroform and sufficient ethanolic potassium hydroxide under conditions that quantitatively liberate ethanamine and then convert all the liberated primary amine into ethyl isocyanide. Assume no other KOH-consuming reactions and that the ammonium salt initially contains no free ethanamine. What is the minimum stoichiometric amount of KOH consumed in the complete two-stage process?
ⓐ. \(0.160\,\mathrm{mol}\)
ⓑ. \(0.240\,\mathrm{mol}\)
ⓒ. \(0.320\,\mathrm{mol}\)
ⓓ. \(0.400\,\mathrm{mol}\)
242. A reaction vessel initially contains \(0.200\,\mathrm{mol}\) of methanamine and \(0.100\,\mathrm{mol}\) of ethanoic anhydride. Assume the following sequential processes occur quantitatively: (i) One methanamine molecule converts one ethanoic anhydride molecule into N-methylethanamide and ethanoic acid. (ii) Each ethanoic acid molecule subsequently protonates one additional methanamine molecule to form methanaminium ethanoate. No other reactions occur. Which statement correctly identifies the final amounts of the two principal nitrogen-containing products?
ⓐ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) methanaminium ethanoate
ⓑ. \(0.200\,\mathrm{mol}\) N-methylethanamide and no methanaminium ethanoate
ⓒ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.200\,\mathrm{mol}\) methanaminium ethanoate
ⓓ. \(0.050\,\mathrm{mol}\) N-methylethanamide and \(0.150\,\mathrm{mol}\) methanaminium ethanoate
243. Ethyl methanoate, \(\mathrm{HCOOC_2H_5}\), is reacted with aniline under suitable forcing conditions that quantitatively convert the ester into its corresponding N-phenylamide. The isolated amide P is then reduced completely with \(\mathrm{LiAlH_4}\), followed by hydrolytic work-up. Which statement correctly identifies P and the final amine Q?
ⓐ. P is acetanilide and Q is N-ethylaniline.
ⓑ. P is N-phenylmethanamide and Q is N-methylaniline.
ⓒ. P is N-ethylmethanamide and Q is benzylamine.
ⓓ. P is benzanilide and Q is N-benzylaniline.
244. A saturated acyclic diamine X contains two amino nitrogen atoms. Its structure is: \[ \mathrm{H_2NCH_2CH_2CH_2NH_2} \] It is treated with exactly one mole of ethanoic anhydride per mole of X under conditions that quantitatively produce the mono-N-acetyl derivative P, without diacetylation. The isolated P is subsequently treated with excess dilute hydrochloric acid under conditions that protonate its remaining free amino group but do not hydrolyse its amide. Which statement correctly describes the final nitrogen-containing compound?
ⓐ. It contains two protonated primary amino groups because anhydride acylation does not change nitrogen functionality.
ⓑ. It contains one amide nitrogen and one protonated primary amino nitrogen.
ⓒ. It contains one tertiary amino nitrogen and one unprotonated primary amino nitrogen.
ⓓ. It contains two amide nitrogens because ethanoic anhydride necessarily acetylates both amino groups with one equivalent.
245. Two compounds with molecular formula \(\mathrm{C_5H_{11}N}\) are compared. P is cyclopentanamine, containing a primary amino group attached outside a five-membered carbon ring. Q is piperidine, containing one secondary amino nitrogen within a saturated six-membered ring. Both compounds are separately N-acetylated with ethanoyl chloride under suitable conditions, and the isolated amides are completely reduced with \(\mathrm{LiAlH_4}\). Which statement correctly compares their final amine classes?
ⓐ. P becomes secondary, whereas Q becomes tertiary.
ⓑ. P becomes tertiary, whereas Q becomes secondary.
ⓒ. Both become secondary because reduction removes the newly introduced acetyl group.
ⓓ. Both become tertiary because every N-acylated compound is a tertiary amine after reduction.
246. A chemist wishes to distinguish three nitrogen-containing compounds through a combination of ordinary protonation, carbylamine testing and acid-amide formation. The compounds are: P: \(\mathrm{C_6H_5NH_2}\) Q: \(\mathrm{C_6H_5NHCH_3}\) R: \(\mathrm{C_6H_5N(CH_3)_2}\) The chemist proposes the following statements. Statement I: All three neutral compounds contain nitrogen lone pairs and can form ammonium salts with a suitable strong acid. Statement II: Only P can give the ordinary positive carbylamine reaction. Statement III: P and Q can undergo ordinary N-acylation because each possesses at least one nitrogen-bound hydrogen. Statement IV: R cannot be protonated because its nitrogen lacks an N–H bond. Statement V: Protonation of P and N-acylation of P produce equivalent nitrogen bonding environments. Which combination is correct?
ⓐ. I, II, III and IV only
ⓑ. II, III and V only
ⓒ. I, II and III only
ⓓ. I, III, IV and V only
247. An unknown compound X has the structure \(\mathrm{CH_3CH[N(CH_3)(C_2H_5)]CH_2CH_3}\). It is separately subjected to treatment with methyl iodide, benzoyl chloride in the presence of pyridine, and a suitable strong acid. Consider the following statements. Statement I: Its systematic name is N-ethyl-N-methylbutan-2-amine. Statement II: The carbon atom at position 2 of the butane framework is stereogenic. Statement III: Ordinary N-benzoylation produces a neutral amide because the nitrogen possesses an available lone pair. Statement IV: The compound can form a quaternary ammonium salt with methyl iodide. Statement V: Protonation can occur without changing the original nitrogen–carbon bonds. Which combination is correct?
ⓐ. I, II, III and IV only
ⓑ. I, III, IV and V only
ⓒ. II, III and V only
ⓓ. I, II, IV and V only
248. Two compounds have the same molecular formula, \(\mathrm{C_6H_7NO}\). P is 2-aminophenol, in which the amino and hydroxyl groups occupy adjacent positions on a benzene ring. Q is 4-aminophenol, in which these groups occupy para positions. Both contain free primary aromatic amino groups. Which statement correctly combines their hydrogen-bonding possibilities with their amine classification?
ⓐ. P can form a favourable intramolecular hydrogen bond between its adjacent functional groups; Q cannot form the corresponding adjacent-group hydrogen bond, but both remain primary aromatic amines.
ⓑ. Q can form the same adjacent-group intramolecular hydrogen bond more readily than P because para substituents are farther apart.
ⓒ. P is a secondary aromatic amine because its amino group is adjacent to hydroxyl, whereas Q is primary.
ⓓ. Intramolecular hydrogen bonding in P requires permanent removal of an N–H bond and converts its nitrogen into a tertiary amine.
249. A vessel initially contains \(0.120\,\mathrm{mol}\) of dimethylamine, \(\mathrm{(CH_3)_2NH}\), dissolved in water. Exactly \(0.060\,\mathrm{mol}\) of HCl is added, and the final solution volume is adjusted to \(1.00\,\mathrm{L}\). Assume quantitative proton transfer and ideal buffer behaviour. Given at \(25^\circ\mathrm{C}\): \[ \mathrm{p}K_b(\text{dimethylamine})=3.27,\qquad \mathrm{p}K_w=14.00 \] For the buffer: \[ \mathrm{pOH}=\mathrm{p}K_b+\log_{10}\frac{[\mathrm{BH^+}]}{[\mathrm{B}]} \] What is the approximate final pH?
ⓐ. 3.27
ⓑ. 7.00
ⓒ. 10.73
ⓓ. 12.64
250. A sample contains two secondary amines having the molecular formula \(\mathrm{C_5H_{13}N}\). P has the structure \(\mathrm{CH_3CH(NHCH_3)CH_2CH_3}\). Q has the structure \(\mathrm{(CH_3)_2CHCH_2NHCH_3}\). Which statement correctly compares their carbon stereogenicity and the behaviour of their nitrogen atoms toward ordinary N-acylation?
ⓐ. Both contain one stereogenic carbon, and only P can undergo N-acylation.
ⓑ. P contains one stereogenic carbon while Q has none; both can undergo ordinary N-acylation.
ⓒ. Neither compound contains a stereogenic carbon because both are secondary amines.
ⓓ. Q contains one stereogenic carbon while P has none; both lack N–H bonds.
251. The following experimental observations are obtained for four separate amines.
SampleObservation
PContains a primary aromatic amino group; its ring also bears a strongly electron-withdrawing nitro group
QContains a primary aromatic amino group; its ring also bears an electron-releasing methyl group
RContains a tertiary aliphatic amino group; does not form an ordinary Hinsberg sulphonamide
SContains a secondary aliphatic amino group; forms an alkali-insoluble Hinsberg sulphonamide
A student proposes the following deductions. Statement I: Both P and Q are structurally eligible for a positive carbylamine reaction despite their different ring substituents. Statement II: The nitro group in P and the methyl group in Q need not influence nitrogen basicity in the same direction. Statement III: R and S can both undergo ordinary N-acylation because each possesses an available nitrogen lone pair. Statement IV: S forms an ordinary Hinsberg sulphonamide, whereas R does not, because their nitrogen-bound hydrogen availability differs. Which combination is correct?
ⓐ. I and III only
ⓑ. II, III and IV only
ⓒ. I, II and III only
ⓓ. I, II and IV only
252. An aqueous solution contains the compound represented by: \[ \mathrm{C_6H_5N_2^+HSO_4^-} \] A student describes this substance as benzenediazonium chloride because both salts contain the same positively charged organic ion. Which statement correctly evaluates the description?
ⓐ. The compound is benzenediazonium hydrogensulphate; its cation is an arenediazonium ion, while its counterion differs from that of benzenediazonium chloride.
ⓑ. The compound is benzenediazonium sulphate because every hydrogen atom must be omitted when naming the anion.
ⓒ. The compound is phenylammonium hydrogensulphate because the two nitrogen atoms form separate amino groups.
ⓓ. The compound is benzenediazonium chloride because the anion does not contribute to the systematic name of a diazonium salt.
253. A cold reaction mixture initially contains \(0.080\,\mathrm{mol}\) of aniline, \(0.060\,\mathrm{mol}\) of sodium nitrite and \(0.150\,\mathrm{mol}\) of hydrochloric acid. Assume quantitative diazotisation at 273–278 K according to: \[ \mathrm{C_6H_5NH_2+NaNO_2+2HCl\longrightarrow C_6H_5N_2^+Cl^-+NaCl+2H_2O} \] No competing reactions occur. What is the maximum amount of benzenediazonium chloride formed?
ⓐ. \(0.040\,\mathrm{mol}\)
ⓑ. \(0.060\,\mathrm{mol}\)
ⓒ. \(0.075\,\mathrm{mol}\)
ⓓ. \(0.080\,\mathrm{mol}\)
254. Benzenediazonium chloride is prepared in a cold aqueous solution at 273–278 K. One portion P is treated with fluoroboric acid to obtain the corresponding diazonium fluoroborate, which is isolated and subsequently heated. A second portion Q is treated with sufficient warm water. Which statement correctly identifies the major organic products and the relevant distinction between the diazonium salts?
ⓐ. P gives chlorobenzene, while Q gives fluorobenzene because water replaces the diazonium group with fluorine.
ⓑ. P gives phenol, while Q gives benzene because the fluoroborate anion supplies hydroxide.
ⓒ. P and Q both give fluorobenzene because the original diazonium salt contains a positively charged nitrogen group.
ⓓ. P gives fluorobenzene on thermal decomposition of benzenediazonium fluoroborate, whereas Q gives phenol through hydrolytic replacement.
255. A chemist wishes to convert benzenediazonium chloride separately into chlorobenzene, bromobenzene, iodobenzene and benzonitrile. Which row gives an appropriate set of reagents for these four transformations?
OptionChlorobenzeneBromobenzeneIodobenzeneBenzonitrile
A\(\mathrm{CuCl/HCl}\)\(\mathrm{CuBr/HBr}\)\(\mathrm{KI}\)\(\mathrm{CuCN/KCN}\)
B\(\mathrm{CuBr/HBr}\)\(\mathrm{CuCl/HCl}\)\(\mathrm{KI}\)\(\mathrm{CuCN/KCN}\)
C\(\mathrm{CuCl/HCl}\)\(\mathrm{CuBr/HBr}\)\(\mathrm{HBF_4,\Delta}\)\(\mathrm{KI}\)
D\(\mathrm{H_2O,\Delta}\)\(\mathrm{CuBr/HBr}\)\(\mathrm{KI}\)\(\mathrm{H_3PO_2}\)
Choose the correct row.
ⓐ. Row A
ⓑ. Row B
ⓒ. Row C
ⓓ. Row D
256. Benzenediazonium chloride is divided into three portions: P is treated with potassium iodide. Q is treated with warm water. R is treated with hypophosphorous acid, \(\mathrm{H_3PO_2}\), under suitable reducing conditions. Which statement correctly identifies the principal organic products and the fate of the diazonium substituent?
ⓐ. P gives fluorobenzene, Q gives iodobenzene and R gives phenol.
ⓑ. P gives iodobenzene, Q gives phenol and R gives benzene; all three transformations remove the diazonium group with nitrogen evolution.
ⓒ. P gives iodobenzene, Q gives benzonitrile and R gives benzene; only P evolves nitrogen.
ⓓ. P gives phenol, Q gives benzene and R gives iodobenzene; the nitrogen atoms remain attached to the products.
257. A student proposes two methods for obtaining 4-bromophenol from 4-bromoaniline. Method P: Diazotise 4-bromoaniline at 273–278 K and subsequently warm the diazonium solution with water. Method Q: Treat 4-bromoaniline directly with aqueous sodium hydroxide under ordinary conditions and assume that \(\mathrm{-NH_2}\) is replaced by \(\mathrm{-OH}\). Which statement correctly evaluates the proposed methods?
ⓐ. Both methods are valid because primary aromatic amino groups undergo ordinary hydroxide substitution as readily as diazonium groups.
ⓑ. Method Q is preferable because diazotisation necessarily removes the pre-existing aromatic bromine substituent.
ⓒ. Method P is valid because the amino group can be converted into a diazonium group and then replaced by hydroxyl while the pre-existing para-bromine is retained.
ⓓ. Neither method is valid because a benzene ring bearing bromine cannot contain a hydroxyl group.
258. Aniline is converted into benzenediazonium chloride in cold acidic solution. Two alternative reagents are then considered: P: \(\mathrm{CuCN/KCN}\) Q: \(\mathrm{H_3PO_2}\) The products are subsequently examined for the presence of carbon introduced during the diazonium-substitution step. Which statement is correct?
ⓐ. Both reactions introduce one additional carbon atom because both replace the diazonium group.
ⓑ. P produces benzonitrile with one additional carbon atom, whereas Q produces benzene without adding carbon.
ⓒ. P produces benzene, whereas Q produces benzonitrile because hypophosphorous acid contains phosphorus.
ⓓ. Neither reaction changes the substituent attached to the aromatic carbon because arenediazonium salts are unreactive toward substitution.
259. A cold solution of benzenediazonium chloride is prepared from aniline. The chemist wishes to obtain benzylamine, \(\mathrm{C_6H_5CH_2NH_2}\), without first preparing a benzyl halide. Which sequence is most appropriate?
ⓐ. Warm with water to form phenol; then treat phenol with ammonia.
ⓑ. Treat with \(\mathrm{H_3PO_2}\) to form benzene; then perform ordinary ammonolysis.
ⓒ. Use \(\mathrm{CuCN/KCN}\) to form benzonitrile, then reduce the nitrile with \(\mathrm{LiAlH_4}\) and work up.
ⓓ. Treat with \(\mathrm{KI}\) to form iodobenzene; then carry out Gabriel synthesis directly on the aryl iodide.
260. An arenediazonium salt is subjected to two different reactions. Reaction P: Treatment with warm water. Reaction Q: Coupling with phenol in an appropriate alkaline medium, with the para position relative to hydroxyl initially unoccupied. Which statement correctly distinguishes the fate of the diazonium nitrogen atoms?
ⓐ. Both reactions retain the diazonium nitrogen atoms in their organic products because nitrogen is strongly bonded in the starting salt.
ⓑ. Reaction P retains an azo linkage, whereas Reaction Q removes nitrogen gas and produces benzene.
ⓒ. Both reactions release nitrogen gas, but only Q produces an aromatic hydroxyl compound.
ⓓ. Reaction P removes the diazonium nitrogen atoms with nitrogen evolution, whereas Reaction Q retains both nitrogen atoms in an azo linkage.
261. A chemist has a cold solution of 4-methylbenzenediazonium chloride. Two products are required: P: 4-Methylbenzonitrile. Q: 4-Methylphenol. The chemist must preserve the ring methyl group and avoid changing the positions of the original aromatic substituents. Which pair of treatments is appropriate?
ⓐ. P: \(\mathrm{CuCN/KCN}\); Q: warm water
ⓑ. P: warm water; Q: \(\mathrm{CuCN/KCN}\)
ⓒ. P: \(\mathrm{KI}\); Q: \(\mathrm{H_3PO_2}\)
ⓓ. P: \(\mathrm{HBF_4,\Delta}\); Q: \(\mathrm{CuBr/HBr}\)
262. A chemist wishes to prepare chlorobenzene from benzenediazonium chloride using two different methods.
MethodReagents used after diazotisation
PCuprous chloride and hydrochloric acid
QCopper powder and hydrochloric acid
Both reactions are performed under suitable conditions. Which statement correctly identifies the methods and compares their expected yields according to NCERT?
ⓐ. P is the Gattermann reaction and Q is the Sandmeyer reaction; Q generally gives the better yield.
ⓑ. P is the Sandmeyer reaction and Q is the Gattermann reaction; P generally gives the better yield.
ⓒ. Both are Sandmeyer reactions because hydrochloric acid is used in both methods.
ⓓ. P introduces chlorine, whereas Q introduces hydrogen because copper powder cannot participate in halogen replacement.
263. The following conversion is proposed: \[ \mathrm{4\!-\!Chloroaniline\xrightarrow{NaNO_2/HCl,\ 273-278\,K}P \xrightarrow{HBF_4}Q \xrightarrow{NaNO_2(aq),\ Cu,\ heat}R} \] Assume that the pre-existing aromatic C–Cl bond remains unchanged throughout the sequence. Which statement correctly identifies P, Q and R?
ⓐ. P is 4-chlorobenzenediazonium chloride; Q is its tetrafluoroborate salt; R is 1-chloro-4-fluorobenzene.
ⓑ. P is 4-chlorobenzenediazonium chloride; Q is 1-chloro-4-fluorobenzene; R is 4-chlorophenol.
ⓒ. P is 4-chloronitrobenzene; Q is its tetrafluoroborate salt; R is 4-chloroaniline.
ⓓ. P is 4-chlorobenzenediazonium chloride; Q is its tetrafluoroborate salt; R is 1-chloro-4-nitrobenzene.
264. A cold solution of benzenediazonium chloride is treated with ethanol under suitable reducing conditions. The reaction is represented as: \[ \mathrm{C_6H_5N_2^+Cl^-+CH_3CH_2OH\longrightarrow P+Q+N_2+HCl} \] Which pair correctly identifies the principal organic products P and Q?
ⓐ. P = Phenol; Q = ethane
ⓑ. P = Chlorobenzene; Q = ethanoic acid
ⓒ. P = Benzene; Q = ethanal
ⓓ. P = Nitrobenzene; Q = methanal
265. Starting from aniline, a student wishes to prepare 1,3,5-tribromobenzene without using a pre-existing polybrominated benzene. The following operations are available: P: Bromination with bromine water. Q: Diazotisation with sodium nitrite and hydrochloric acid at 273–278 K. R: Reduction of the diazonium group to hydrogen using hypophosphorous acid. Which sequence gives the target compound through the standard expected transformations?
ⓐ. Q → R → P
ⓑ. P → Q → R
ⓒ. Q → P → R
ⓓ. R → P → Q
266. Nitrobenzene is subjected to the following sequence: \[ \mathrm{Nitrobenzene \xrightarrow{Br_2/FeBr_3}P \xrightarrow{Sn/HCl,\ then\ NaOH}Q \xrightarrow{NaNO_2/HCl,\ 273-278\,K}R \xrightarrow{HBF_4,\ then\ heat}S} \] Assume each transformation proceeds through its standard principal product without changing pre-existing aromatic carbon–bromine bonds. Which compound is S?
ⓐ. 1-Bromo-2-fluorobenzene
ⓑ. 1-Bromo-4-fluorobenzene
ⓒ. 3-Bromoaniline
ⓓ. 1-Bromo-3-fluorobenzene
267. A chemist wishes to synthesise 4-bromobenzoic acid from 4-bromoaniline through a diazonium intermediate. The following reagents are available: P: \(\mathrm{NaNO_2/HCl}\) at 273–278 K. Q: \(\mathrm{CuCN}\) under Sandmeyer conditions. R: Suitable aqueous hydrolysis of a nitrile, followed by acidification. Which sequence is appropriate, and what is the source of the new carboxyl carbon?
ⓐ. P → Q → R; the carboxyl carbon originates from cyanide introduced during the Sandmeyer reaction.
ⓑ. P → R → Q; the carboxyl carbon originates from the original amino nitrogen.
ⓒ. Q → P → R; the carboxyl carbon originates from the aromatic bromine substituent.
ⓓ. P → Q → R; the carboxyl carbon originates from the benzene-ring carbon formerly bonded to nitrogen.
268. Benzenediazonium chloride is coupled separately with phenol and 4-methylphenol under suitable alkaline conditions. In both cases, assume ordinary electrophilic aromatic coupling and that the activated aromatic positions remain available except where already occupied by substituents. Which statement correctly predicts the preferred coupling positions?
ⓐ. Coupling with phenol occurs predominantly at an ortho position, while coupling with 4-methylphenol occurs predominantly at the para position.
ⓑ. Both coupling reactions must occur at the para position because hydroxyl is always para directing regardless of existing substituents.
ⓒ. Phenol generally couples at its available para position, whereas 4-methylphenol can couple at an ortho position because its para position is occupied by methyl.
ⓓ. Neither phenol nor 4-methylphenol can undergo azo coupling because both lack amino nitrogen.
269. A cold solution of benzenediazonium chloride is divided into two portions. Portion P is allowed to react with aniline under appropriately controlled, mildly acidic coupling conditions in which sufficient neutral aniline is present. Portion Q is treated with aniline in a strongly acidic medium where the aromatic amino group is predominantly protonated. Which statement best predicts the relative tendency for ordinary azo coupling?
ⓐ. Q should couple more readily because protonated aniline donates nitrogen lone-pair electron density more strongly into the ring.
ⓑ. P is more favourable for ordinary coupling because neutral aniline activates its aromatic ring, whereas extensive protonation suppresses that activation in Q.
ⓒ. Both portions must produce identical coupling rates because their aromatic carbon frameworks are unchanged.
ⓓ. Q must give an isocyanide instead of an azo compound because strongly acidic conditions convert a secondary amine into a primary amine.
270. Benzenediazonium chloride is reacted with N,N-dimethylaniline under suitable azo-coupling conditions. The para position of the N,N-dimethylamino-substituted ring is initially unoccupied. A student predicts that no azo compound can form because N,N-dimethylaniline has no N–H bond. Which statement correctly evaluates this prediction?
ⓐ. The prediction is correct because the diazonium group must replace an N–H hydrogen during azo coupling.
ⓑ. The prediction is correct because tertiary aromatic amines cannot activate their benzene rings.
ⓒ. The prediction is incorrect because azo coupling necessarily converts the tertiary amino nitrogen into a primary amino group.
ⓓ. The prediction is incorrect because coupling occurs at an activated aromatic carbon, allowing an azo linkage to form without replacing an N–H hydrogen.
271. Benzene-1,4-diamine is converted completely into its bis(diazonium) salt under carefully controlled cold conditions. The resulting intermediate is reacted with two equivalents of phenol under conditions that produce complete azo coupling at the para position of each phenolic ring. Assume both coupling reactions proceed independently and no side reactions occur. Which statement correctly describes the principal product?
ⓐ. It contains one azo linkage and two nitrogen atoms because one diazonium group must leave as nitrogen gas.
ⓑ. It contains two azo linkages and four nitrogen atoms retained from the original two diazonium groups.
ⓒ. It contains two nitro groups because phenol oxidises diazonium nitrogen during coupling.
ⓓ. It contains no nitrogen because both diazonium groups are displaced by phenolic hydroxyl groups.
272. Three portions of benzenediazonium chloride are handled as follows: P: The freshly prepared aqueous solution is maintained at 273–278 K and used promptly. Q: Benzenediazonium chloride is isolated in the dry state and kept under ordinary laboratory storage conditions. R: Benzenediazonium chloride is converted into the corresponding tetrafluoroborate salt, which is isolated under suitable conditions. Which statement agrees with the NCERT description of diazonium-salt stability?
ⓐ. Q is the most suitable storage form because removal of water makes benzenediazonium chloride indefinitely stable.
ⓑ. P is usable briefly in cold solution; Q is unsafe as a dry diazonium chloride; R is comparatively stable as tetrafluoroborate.
ⓒ. P must immediately release nitrogen at 273–278 K, whereas Q and R remain equally stable in the dry state.
ⓓ. All three preparations have identical stability because they contain the same benzenediazonium cation.
273. The two nitrogen atoms of benzenediazonium chloride are imagined to be labelled with the stable isotope \(^{15}\mathrm{N}\), while the nitrogen atom supplied by CuCN has the ordinary isotope \(^{14}\mathrm{N}\). The labelled diazonium salt is converted into benzonitrile using CuCN under Sandmeyer conditions. The resulting nitrile is subsequently reduced completely to benzylamine using \(\mathrm{LiAlH_4}\). Assume that no nitrogen-isotope exchange occurs. Which statement correctly tracks the nitrogen atoms?
ⓐ. The final benzylamine contains \(^{15}\mathrm{N}\) because its nitrogen must originate from the original aniline amino group.
ⓑ. Both diazonium nitrogen atoms remain in benzonitrile, while the cyanide nitrogen escapes as molecular nitrogen.
ⓒ. The diazonium nitrogen atoms leave as labelled nitrogen gas; the final benzylamine contains \(^{14}\mathrm{N}\) derived from cyanide.
ⓓ. The final benzylamine contains no nitrogen because lithium aluminium hydride removes the nitrile nitrogen during reduction.
274. Two arenediazonium chloride solutions are prepared: P: Benzenediazonium chloride. Q: 4-Methylbenzenediazonium chloride. P is treated with cuprous bromide and hydrobromic acid. Q is treated with copper powder and hydrobromic acid. Which statement correctly identifies the principal products and explains why the chloride counterion does not force chlorine substitution?
ⓐ. P gives chlorobenzene and Q gives 4-chlorotoluene because both starting salts contain chloride.
ⓑ. P gives bromobenzene through a Sandmeyer reaction, while Q gives 4-bromotoluene through a Gattermann reaction.
ⓒ. P gives benzene and Q gives toluene because both copper reagents remove nitrogen without introducing halogen.
ⓓ. P gives bromobenzene, while Q must remain unchanged because Gattermann halogenation requires cuprous bromide rather than copper powder.
275. A freshly prepared cold solution contains \(0.100\,\mathrm{mol}\) of benzenediazonium chloride. Exactly \(0.040\,\mathrm{mol}\) of phenol is added under suitable alkaline azo-coupling conditions. Assume phenol couples quantitatively with an equal amount of diazonium salt to produce one mole of azo compound per mole of phenol. The remaining unreacted diazonium salt is then warmed sufficiently with water to undergo quantitative hydrolysis to phenol with nitrogen evolution. All evolved nitrogen is collected at STP. Given molar volume at STP \(=22.4\,\mathrm{L\,mol^{-1}}\). What are the amount of azo compound formed and the volume of nitrogen gas evolved, respectively?
ⓐ. \(0.040\,\mathrm{mol}\) and \(1.344\,\mathrm{L}\)
ⓑ. \(0.040\,\mathrm{mol}\) and \(2.240\,\mathrm{L}\)
ⓒ. \(0.060\,\mathrm{mol}\) and \(1.344\,\mathrm{L}\)
ⓓ. \(0.100\,\mathrm{mol}\) and \(2.240\,\mathrm{L}\)
276. A chemist wishes to prepare 3-nitrotoluene as the principal product from an aromatic amine. The available starting compound is 3-methylaniline. Two proposed routes are: Route P: Direct nitration of toluene using concentrated nitric and sulfuric acids. Route Q: Diazotisation of 3-methylaniline at 273–278 K, conversion into the corresponding diazonium tetrafluoroborate, followed by treatment with aqueous sodium nitrite and copper under the NCERT nitro-replacement conditions. Which statement correctly evaluates the routes?
ⓐ. Route P preferentially forms 3-nitrotoluene because methyl is a meta-directing group; Route Q introduces nitro at an unpredictable aromatic position.
ⓑ. Both routes necessarily give 3-nitrotoluene as the only product because they begin with aromatic compounds containing seven carbon atoms.
ⓒ. Route P ordinarily favours ortho- and para-nitrotoluene, whereas Route Q can introduce nitro at the original amino-bearing position to give 3-nitrotoluene.
ⓓ. Route Q produces 3-fluorotoluene because the presence of a tetrafluoroborate intermediate always requires fluoride replacement.
277. Two hypothetical arenediazonium salt samples have the following compositions: P: \(\mathrm{C_6H_5N_2^+HSO_4^-}\) Q: \(\mathrm{(C_6H_5N_2^+)_2SO_4^{2-}}\) Each sample contains \(0.025\,\mathrm{mol}\) of the indicated salt formula units. Both samples are separately subjected to complete hydrolytic decomposition under conditions that replace every aromatic diazonium group with hydroxyl and liberate one molecule of nitrogen per diazonium group. Assume quantitative reactions and a molar gas volume of \(22.4\,\mathrm{L\,mol^{-1}}\) at STP. Which option gives the nitrogen volumes evolved from P and Q, respectively?
ⓐ. \(0.560\,\mathrm{L}\) and \(0.560\,\mathrm{L}\)
ⓑ. \(1.120\,\mathrm{L}\) and \(0.560\,\mathrm{L}\)
ⓒ. \(0.560\,\mathrm{L}\) and \(1.120\,\mathrm{L}\)
ⓓ. \(1.120\,\mathrm{L}\) and \(1.120\,\mathrm{L}\)
278. Aniline is converted into benzenediazonium chloride at 273–278 K. The diazonium salt is subjected to Sandmeyer cyanation to form compound P. P undergoes controlled partial hydrolysis to give a primary amide Q. Finally, Q is treated with bromine and aqueous sodium hydroxide under Hofmann bromamide degradation conditions. Assume each transformation is complete. Which statement correctly identifies Q and the final organic product R?
ⓐ. Q is benzamide, and R is aniline.
ⓑ. Q is phenylacetamide, and R is benzylamine.
ⓒ. Q is benzamide, and R is benzylamine.
ⓓ. Q is N-phenylmethanamide, and R is aniline.
279. An aromatic azo compound X is prepared by coupling benzenediazonium chloride with exactly one molecule of an activated aromatic compound. The coupling component is one of the following: P: Phenol, \(\mathrm{C_6H_6O}\) Q: Aniline, \(\mathrm{C_6H_7N}\) R: N,N-Dimethylaniline, \(\mathrm{C_8H_{11}N}\) During coupling, one aromatic hydrogen of the coupling component is replaced by the diazonium-derived azo substituent. An isolated \(0.594\,\mathrm{g}\) sample of pure X contains \(0.0840\,\mathrm{g}\) of nitrogen. Given atomic masses: C = 12, H = 1, N = 14, O = 16. Which option correctly identifies the coupling component and the amount of X?
ⓐ. Aniline; \(3.00\times10^{-3}\,\mathrm{mol}\)
ⓑ. N,N-Dimethylaniline; \(2.64\times10^{-3}\,\mathrm{mol}\)
ⓒ. Phenol; \(2.64\times10^{-3}\,\mathrm{mol}\)
ⓓ. Phenol; \(3.00\times10^{-3}\,\mathrm{mol}\)
280. Two separate solutions contain equal analytical concentrations of phenol and are maintained at pH 9.0 and pH 11.0, respectively. The pKa of phenol is taken as 10.0. Assume ideal acid–base equilibrium and use: \[ \frac{[\mathrm{C_6H_5O^-}]}{[\mathrm{C_6H_5OH}]}=10^{\mathrm{pH}-\mathrm{p}K_a} \] The solutions are intended as coupling components for freshly prepared benzenediazonium chloride. Ignoring subsequent changes caused by mixing, what is the ratio of the phenoxide concentrations in the pH 11.0 solution to those in the pH 9.0 solution?
ⓐ. 11
ⓑ. 100
ⓒ. 50
ⓓ. 10
281. The compound 4-(aminomethyl)aniline has the structure: \[ \mathrm{4\!-\!H_2NC_6H_4CH_2NH_2} \] It contains one primary aromatic amino group and one primary aliphatic amino group. The compound is treated with sufficient nitrous acid in cold acidic solution under the following stipulated conditions: (i) The benzylic amino group is quantitatively replaced by hydroxyl with immediate nitrogen evolution. (ii) The aromatic amino group is quantitatively converted into a diazonium group that remains in the cold solution. The remaining diazonium functionality is then coupled quantitatively with phenol at its para position under suitable conditions. Which statement correctly identifies the final organic product and the amount of nitrogen gas evolved per mole of starting compound?
ⓐ. 4-Hydroxybenzyl alcohol; two moles of nitrogen
ⓑ. A hydroxy-substituted azo compound containing a benzylic amino group; one mole of nitrogen
ⓒ. A hydroxymethyl-substituted hydroxyazobenzene; one mole of nitrogen
ⓓ. A hydroxymethyl-substituted hydroxyazobenzene; two moles of nitrogen
282. Aniline is divided into two portions. Portion P is heated with chloroform and ethanolic potassium hydroxide to form an isocyanide. Portion Q is diazotised at 273–278 K and subsequently treated with cuprous cyanide under Sandmeyer conditions. The final products have the same molecular formula, \(\mathrm{C_7H_5N}\). Which statement correctly identifies their connectivities and the sources of nitrogen?
ⓐ. P gives benzonitrile containing nitrogen from aniline; Q gives phenyl isocyanide containing nitrogen from cyanide.
ⓑ. Both give benzonitrile because any product containing a carbon–nitrogen triple bond is a nitrile.
ⓒ. Both give phenyl isocyanide because the aromatic ring initially contains an amino group.
ⓓ. P gives phenyl isocyanide containing the original aniline nitrogen; Q gives benzonitrile containing nitrogen introduced through cyanide.
283. 4-Aminobenzonitrile, \(\mathrm{4\!-\!H_2NC_6H_4CN}\), is used to prepare 4-fluorobenzylamine, \(\mathrm{4\!-\!FC_6H_4CH_2NH_2}\). Two synthetic orders are considered: Route P: Diazotisation of the aromatic amino group, conversion into its tetrafluoroborate salt, thermal fluorination, and finally reduction of the nitrile. Route Q: Reduction of the nitrile first, followed by treatment with nitrous acid and attempted aromatic fluorination. Which statement correctly identifies the more direct selective route and its crucial intermediate?
ⓐ. Route P; the crucial intermediate before nitrile reduction is 4-fluorobenzonitrile.
ⓑ. Route Q; the crucial intermediate before fluorination is benzenediazonium chloride containing no other amino group.
ⓒ. Route P; the crucial intermediate before nitrile reduction is 4-fluorobenzamide.
ⓓ. Route Q; nitrile reduction converts the aromatic amino group into a nonreactive amide protecting group.
284. Sulphanilic acid is 4-aminobenzenesulfonic acid, containing an aromatic amino group and a sulfonic acid group at para positions. It is diazotised under appropriate cold conditions, and the resulting aromatic diazonium species is coupled with N,N-dimethylaniline at the para position of its N,N-dimethylamino-substituted ring. Which statement correctly describes the principal azo product?
ⓐ. The sulfonic acid group is eliminated, and all three nitrogen atoms enter one continuous \(\mathrm{-N=N=N-}\) linkage.
ⓑ. Both nitrogen atoms of the diazonium group leave as nitrogen gas, giving two aromatic rings joined by a carbon–carbon bond.
ⓒ. The tertiary dimethylamino group is converted into a primary amino group because azo coupling requires an N–H bond.
ⓓ. The sulfonic acid group is retained; the two diazonium nitrogen atoms form an azo linkage; and the tertiary dimethylamino group remains attached to the coupling ring.
285. 4-Aminobenzaldehyde has the structure \(\mathrm{4\!-\!H_2NC_6H_4CHO}\). A chemist wishes to obtain 4-(hydroxymethyl)benzonitrile while retaining the para relationship between the two substituents. The following sequence is proposed: (i) Diazotisation of the primary aromatic amino group at 273–278 K. (ii) Sandmeyer cyanation using cuprous cyanide. (iii) Reduction using sodium borohydride under conditions that reduce aldehydes but leave nitriles unchanged. Assume the aldehyde group remains unchanged during steps (i) and (ii). Which principal product is expected?
ⓐ. \(\mathrm{4\!-\!H_2NC_6H_4CH_2OH}\)
ⓑ. \(\mathrm{4\!-\!NCC_6H_4COOH}\)
ⓒ. \(\mathrm{4\!-\!H_2NCH_2C_6H_4CH_2OH}\)
ⓓ. \(\mathrm{4\!-\!HOCH_2C_6H_4CN}\)
286. Consider the following assertion and reason. Assertion (A): Aniline undergoes diazotisation with sodium nitrite and hydrochloric acid at 273–278 K even though a substantial fraction of its amino groups can be protonated in the acidic reaction medium. Reason (R): Acid provides the conditions needed to generate nitrous acid and the active nitrosating species, while protonation of aniline is an equilibrium and diazotisation is a reaction involving the amino functionality rather than ordinary electrophilic substitution at the aromatic carbon atoms. Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
287. The compound 4-aminoacetanilide has the structure: \[ \mathrm{4\!-\!H_2NC_6H_4NHCOCH_3} \] It contains one free primary aromatic amino group and one acetamido group. The following sequence is performed under conditions that preserve the acetamido group during the first two reactions: (i) Diazotisation with sodium nitrite and hydrochloric acid at 273–278 K. (ii) Treatment of the diazonium intermediate with potassium iodide. (iii) Complete hydrolysis of the remaining acetamido group, followed by suitable work-up. Which compound is obtained?
ⓐ. 2-Iodoaniline
ⓑ. 4-Iodoaniline
ⓒ. 4-Iodoacetanilide
ⓓ. 4-Aminophenol
288. Three substrates are considered for introducing a cyano group: P: Benzenediazonium chloride treated with \(\mathrm{CuCN}\) under Sandmeyer conditions. Q: Chlorobenzene treated with aqueous potassium cyanide under ordinary nucleophilic substitution conditions. R: Bromoethane treated with alcoholic potassium cyanide under suitable substitution conditions. Which statement correctly identifies the expected principal carbon–cyanide bond-forming outcomes?
ⓐ. P and Q give benzonitrile, whereas R gives ethanamine.
ⓑ. Q and R give nitriles, whereas P gives phenyl isocyanide.
ⓒ. P gives benzonitrile; Q lacks the stipulated ordinary cyanide displacement; R gives propanenitrile.
ⓓ. P gives phenyl isocyanide, Q gives benzonitrile, and R gives ethyl isocyanide.
289. A cold solution of 2-bromo-4-methylbenzenediazonium chloride is coupled with phenol under conditions favouring substitution at the para position relative to phenolic hydroxyl. The diazonium group is designated as occupying carbon 1 of its aromatic ring. The bromine and methyl substituents are initially at carbon 2 and carbon 4, respectively. Which statement correctly describes the principal azo product?
ⓐ. The azo linkage joins the diazonium-derived ring at carbon 1 to the phenolic ring at its para position; the original bromine and methyl substituents remain at carbon 2 and carbon 4 of the first ring.
ⓑ. The azo linkage forms through the bromine-bearing carbon of the diazonium-derived ring, and bromine is eliminated.
ⓒ. The azo linkage connects the two rings through their methyl and hydroxyl substituents, leaving the diazonium group unchanged.
ⓓ. The phenolic ring couples exclusively at the carbon directly bonded to hydroxyl, while the diazonium nitrogen atoms leave as nitrogen gas.
290. Benzamide, \(\mathrm{C_6H_5CONH_2}\), is divided into two portions. Pathway P: \[ \mathrm{Benzamide\xrightarrow{Br_2/NaOH}P_1 \xrightarrow{NaNO_2/HCl,\ 273-278\,K}P_2 \xrightarrow{warm\ H_2O}P_3} \] Pathway Q: \[ \mathrm{Benzamide\xrightarrow[\text{work-up}]{LiAlH_4}Q_1 \xrightarrow{HNO_2}Q_2} \] For the reaction producing Q2, assume the standard primary-aliphatic-amine-to-alcohol transformation occurs without rearrangement. Which statement correctly identifies P3 and Q2?
ⓐ. P3 is benzyl alcohol, and Q2 is phenol.
ⓑ. Both P3 and Q2 are phenol because both pathways begin with benzamide.
ⓒ. P3 is aniline, and Q2 is benzonitrile.
ⓓ. P3 is phenol, and Q2 is benzyl alcohol.
291. 4-Aminobenzoic acid, \(\mathrm{4\!-\!H_2NC_6H_4COOH}\), is diazotised at 273–278 K and coupled quantitatively with phenol at the para position relative to hydroxyl under suitable conditions. The neutral azo product is isolated without alteration of the original carboxylic acid group. A \(0.060\,\mathrm{mol}\) sample of this product is then treated with sufficient aqueous sodium hydroxide to deprotonate quantitatively both its carboxylic acid group and its phenolic hydroxyl group. Assume no other NaOH-consuming reactions. Which statement correctly gives the number of diazonium-derived nitrogen atoms retained per azo molecule and the minimum stoichiometric amount of NaOH required?
ⓐ. Two nitrogen atoms retained; \(0.060\,\mathrm{mol}\) NaOH
ⓑ. Two nitrogen atoms retained; \(0.120\,\mathrm{mol}\) NaOH
ⓒ. No diazonium-derived nitrogen retained; \(0.120\,\mathrm{mol}\) NaOH
ⓓ. One diazonium-derived nitrogen retained; \(0.180\,\mathrm{mol}\) NaOH
292. Consider the following assertion and reason. Assertion (A): Benzenediazonium chloride can be used as a reactive intermediate in cold aqueous solution, whereas the corresponding diazonium compound obtained from benzylamine does not show comparable stability under ordinary diazotisation conditions. Reason (R): In the benzenediazonium ion, the diazonium group is directly attached to an aromatic carbon and receives resonance stabilisation; in the diazonium species derived from benzylamine, a saturated methylene carbon separates the diazonium group from the aromatic ring. Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
293. Two experiments use isotopically labelled oxygen under the following conditions. Experiment P: Benzenediazonium chloride is hydrolysed quantitatively using water enriched in \(^{18}\mathrm{O}\). Assume the hydroxyl oxygen introduced into phenol originates from the attacking water and undergoes no subsequent isotope exchange. Experiment Q: Ordinary benzenediazonium chloride is coupled quantitatively with phenol whose hydroxyl oxygen is labelled with \(^{18}\mathrm{O}\). Assume no oxygen-isotope exchange occurs during coupling. Which statement correctly predicts the location of the labelled oxygen and the fate of the diazonium nitrogen atoms?
ⓐ. P forms unlabelled phenol and retains both diazonium nitrogen atoms; Q forms labelled phenol with nitrogen evolution.
ⓑ. P forms \(^{18}\mathrm{O}\)-labelled phenol with nitrogen evolution; Q forms an \(^{18}\mathrm{O}\)-labelled hydroxyazo compound retaining both diazonium nitrogen atoms.
ⓒ. P forms \(^{18}\mathrm{O}\)-labelled phenol retaining an azo linkage; Q forms an unlabelled hydroxyazo compound.
ⓓ. Both reactions introduce labelled oxygen from water and liberate the original diazonium nitrogen atoms as molecular nitrogen.
294. Four substances are examined at 273–278 K.
SampleStructure or descriptionTreatment
P\(\mathrm{C_6H_5NH_2}\)\(\mathrm{NaNO_2/HCl}\)
Q\(\mathrm{C_6H_5NHCH_3}\)\(\mathrm{NaNO_2/HCl}\)
R\(\mathrm{C_6H_5CH_2NH_2}\)\(\mathrm{NaNO_2/HCl}\)
S\(\mathrm{C_6H_5NH_3^+Cl^-}\)\(\mathrm{NaNO_2/HCl}\), with sufficient reagent and appropriate reaction conditions
Which statement correctly identifies the significance of the initial nitrogen substitution and protonation states?
ⓐ. Only P can ultimately form benzenediazonium chloride because the initially protonated nitrogen of S can never participate in diazotisation.
ⓑ. P and R form comparably stable cold arenediazonium salts because both molecules contain benzene rings.
ⓒ. P and S can furnish benzenediazonium chloride under suitable conditions; Q is secondary, while R gives an unstable aliphatic diazonium species.
ⓓ. Q and S form identical N-nitroso compounds because both initially contain at least one N–H bond.
295. A sample of aniline is diazotised using sodium nitrite in which the nitrogen atom is \(^{15}\mathrm{N}\)-labelled. The nitrogen atom initially present in aniline is ordinary \(^{14}\mathrm{N}\). The resulting benzenediazonium chloride is divided into two portions. Portion P is hydrolysed completely to phenol. Portion Q undergoes complete azo coupling with phenol. Assume no nitrogen-isotope exchange takes place. Which statement correctly describes the isotope distribution?
ⓐ. Both portions release only \(^{14}\mathrm{N}_2\), because the nitrite nitrogen is removed before diazonium formation.
ⓑ. P releases nitrogen containing one \(^{14}\mathrm{N}\) and one \(^{15}\mathrm{N}\); Q retains these two differently labelled nitrogen atoms in its azo linkage.
ⓒ. P forms phenol containing a \(^{15}\mathrm{N}\) atom; Q releases nitrogen containing two \(^{14}\mathrm{N}\) atoms.
ⓓ. P releases only \(^{15}\mathrm{N}_2\); Q incorporates a new nitrogen atom from phenol into its azo linkage.
296. A sample containing \(0.075\,\mathrm{mol}\) of benzenediazonium tetrafluoroborate is heated under conditions giving quantitative formation of fluorobenzene, nitrogen and boron trifluoride. The evolved \(\mathrm{BF_3}\) is passed into a separate vessel containing \(0.050\,\mathrm{mol}\) of dry triethylamine. Assume quantitative formation of a \(1:1\) Lewis acid–base adduct between \(\mathrm{BF_3}\) and triethylamine, with no competing reactions. How many moles of the adduct are formed, and how many moles of \(\mathrm{BF_3}\) remain uncombined?
ⓐ. \(0.050\,\mathrm{mol}\) adduct and \(0.025\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
ⓑ. \(0.075\,\mathrm{mol}\) adduct and no uncombined \(\mathrm{BF_3}\)
ⓒ. \(0.025\,\mathrm{mol}\) adduct and \(0.050\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
ⓓ. \(0.050\,\mathrm{mol}\) adduct and \(0.075\,\mathrm{mol}\) uncombined \(\mathrm{BF_3}\)
297. Benzenediazonium chloride is reduced to benzene using hypophosphorous acid, \(\mathrm{H_3PO_2}\), under suitable conditions. During the process, hypophosphorous acid is oxidised to phosphorous acid, \(\mathrm{H_3PO_3}\). Assume the reduction follows the idealised ionic equation: \[ \mathrm{C_6H_5N_2^++H_3PO_2+H_2O\longrightarrow C_6H_6+N_2+H_3PO_3+H^+} \] Which statement correctly identifies the oxidation-state change of phosphorus and the electron transfer involved per mole of diazonium cation?
ⓐ. Phosphorus changes from \(+3\) to \(+1\), accepting two moles of electrons.
ⓑ. Phosphorus changes from \(+1\) to \(+5\), donating four moles of electrons.
ⓒ. Phosphorus changes from \(+1\) to \(+3\), donating two moles of electrons.
ⓓ. Phosphorus changes from \(+3\) to \(+5\), donating two moles of electrons.
298. A solution containing \(0.040\,\mathrm{mol}\) of benzenediazonium chloride is treated with sufficient ethanol under conditions that quantitatively produce benzene, ethanal and nitrogen. The ethanal formed is subsequently reacted completely with excess Tollens' reagent. Assume each mole of ethanal reduces two moles of silver ions to metallic silver. Given atomic mass of Ag = \(108\,\mathrm{g\,mol^{-1}}\). What mass of metallic silver is deposited?
ⓐ. \(4.32\,\mathrm{g}\)
ⓑ. \(17.28\,\mathrm{g}\)
ⓒ. \(12.96\,\mathrm{g}\)
ⓓ. \(8.64\,\mathrm{g}\)
299. Three phenolic compounds are separately used as coupling components with benzenediazonium chloride under suitable conditions for ordinary ortho/para azo coupling. P: 2,6-Dimethylphenol. Q: 2,4-Dimethylphenol. R: 2,4,6-Trimethylphenol. Assume coupling occurs preferentially at an available ortho or para position relative to the phenolic hydroxyl group, and no displacement of existing methyl groups occurs. Which statement correctly predicts the preferred positions?
ⓐ. P couples at an ortho position; Q couples at para; R couples at para.
ⓑ. P couples para; Q couples at an available ortho position; R has no free ortho/para coupling site.
ⓒ. P and Q both couple at para; R couples at meta because methyl groups become strong meta directors.
ⓓ. P has no available activated position; Q couples at para; R couples at ortho.
300. A chemist wishes to prepare 4-iodobenzoic acid from 4-methylaniline while preserving the para relationship between the two substituent positions. The following operations are available: P: Diazotisation using \(\mathrm{NaNO_2/HCl}\) at 273–278 K. Q: Replacement of the diazonium group using potassium iodide. R: Oxidation of the aromatic methyl side chain to a carboxylic acid group using suitable hot alkaline potassium permanganate, followed by acidification. Assume the aromatic C–I bond remains unchanged during the stipulated side-chain oxidation. Which sequence is appropriate?
ⓐ. R → P → Q; the carboxylic acid is formed before the diazonium intermediate.
ⓑ. P → R → Q; heating the diazonium intermediate preserves its cold-solution stability.
ⓒ. Q → P → R; iodide first converts the primary aromatic amino group into a diazonium salt.
ⓓ. P → Q → R; diazonium replacement installs iodine before the methyl group is oxidised.
Subscribe
Notify of
guest
0 Comments
Scroll to Top