501. Four separate synthetic plans use an organic compound containing a free primary amino group.
| Plan | Starting compound | Specified transformation |
|---|
| P | Aniline | Cold diazotisation, then KI |
| Q | Benzylamine | Cold nitrous acid, then KI |
| R | 4-Aminophenol | Cold diazotisation, then warm water |
| S | Ethylamine | Cold diazotisation, then \(\mathrm{HBF_4}\) and heating |
Which statement correctly identifies the plans that use an aromatic diazonium salt for the corresponding predictable NCERT substitution reaction?
ⓐ. P and R only.
ⓑ. P, Q and R only.
ⓒ. Q and S only.
ⓓ. P, R and S only.
Correct Answer: P and R only.
Explanation: The critical distinction is whether the amino nitrogen is directly attached to an aromatic carbon.
Aniline and 4-aminophenol contain free primary aromatic amino groups.
Benzylamine and ethylamine contain primary amino groups attached to saturated carbon atoms.
All four are primary amines, but their nitrous-acid reactions are not equivalent.
\(\textbf{Plan P:}\)
Aniline undergoes diazotisation at 273–278 K to form benzenediazonium chloride.
Potassium iodide replaces its diazonium group by iodine.
The predictable substitution product is iodobenzene.
\(\textbf{Plan Q:}\)
Benzylamine is a primary aliphatic-type amine because nitrogen is bonded to a benzylic methylene carbon.
Its aliphatic diazonium intermediate is unstable.
It cannot simply be treated as a stable arenediazonium salt for the ordinary aromatic iodide-replacement reaction.
\(\textbf{Plan R:}\)
4-Aminophenol contains a primary aromatic amino group.
It can undergo suitable diazotisation while its phenolic hydroxyl group is retained.
Warming its arenediazonium derivative with water replaces the diazonium group by hydroxyl.
The corresponding product is benzene-1,4-diol.
\(\textbf{Plan S:}\)
Ethylamine is a primary aliphatic amine.
It does not furnish the comparatively stable aromatic diazonium intermediate required for the Balz–Schiemann reaction.
Its unstable aliphatic diazonium species undergoes ordinary decomposition rather than the predictable aryl-fluoride synthesis.
The correct plans are therefore P and R.
The presence of a primary amino group is necessary for the specified diazotisation classification but does not establish aromatic diazonium stability.
The bonding environment of the nitrogen-bearing carbon determines which subsequent synthetic operations are appropriate.
502. A mixture contains aniline and N,N-dimethylaniline.
Aniline is selectively converted into benzenediazonium chloride at 273–278 K, while N,N-dimethylaniline is separately maintained as its neutral free base.
The diazonium solution is then added to the neutral N,N-dimethylaniline under conditions giving quantitative para azo coupling.
A second experiment uses the same quantities but first protonates essentially all N,N-dimethylaniline in a strongly acidic solution, which is maintained acidic during attempted coupling.
Which statement best explains the expected difference between the experiments?
ⓐ. Protonated N,N-dimethylaniline becomes a primary aromatic amine and therefore consumes two equivalents of diazonium salt.
ⓑ. The strongly acidic medium supplies an additional nitrogen lone pair and increases para azo coupling.
ⓒ. Protonation changes N,N-dimethylaniline into phenol, causing the coupling position to shift from para to ortho.
ⓓ. The free tertiary amino group activates the ring through lone-pair resonance donation, whereas protonation reduces that activation and can suppress ordinary azo coupling.
Correct Answer: The free tertiary amino group activates the ring through lone-pair resonance donation, whereas protonation reduces that activation and can suppress ordinary azo coupling.
Explanation: N,N-Dimethylaniline is a tertiary aromatic amine.
It possesses a nitrogen lone pair capable of interacting with the aromatic ring.
That interaction increases electron density at positions favourable for electrophilic substitution.
The para position is particularly suitable for ordinary azo coupling when available.
Benzenediazonium chloride supplies an electrophilic diazonium component.
The first experiment therefore uses an appropriately activated aromatic coupling partner.
\(\textbf{Effect of protonation:}\)
Strong acid converts the neutral tertiary amino nitrogen into an ammonium centre.
The lone pair used for resonance donation is now involved in bonding to the added proton.
The protonated nitrogen cannot provide the same activating resonance contribution.
Its electronic influence on the aromatic ring consequently differs from that of neutral N,N-dimethylaniline.
This can strongly suppress the ordinary azo-coupling reaction under otherwise comparable conditions.
The effect is caused by the protonation state of the coupling component rather than a change in its methyl-group count.
Protonation does not convert a tertiary amino group into a primary amino group.
Nor does it transform the compound into phenol.
The comparison illustrates why the pH conditions of azo coupling matter in addition to the structures of the diazonium and aromatic components.
A suitable coupling medium must preserve sufficient aromatic activation while allowing the required electrophilic reaction.
503. A chemist begins with 4-nitrobenzyl bromide, \(\mathrm{4\!-\!O_2NC_6H_4CH_2Br}\).
The target is 4-aminophenylacetic acid, \(\mathrm{4\!-\!H_2NC_6H_4CH_2COOH}\).
Two sequences are proposed:
Route P:
(i) Substitute benzylic bromine with potassium cyanide through its carbon end.
(ii) Hydrolyse the resulting nitrile completely to a carboxylic acid.
(iii) Reduce the aromatic nitro group selectively to an amino group.
Route Q:
(i) Reduce the aromatic nitro group to an amino group.
(ii) Treat the resulting aminobenzyl bromide with potassium cyanide under unprotected conditions and assume no other reactions involving the amino group.
Which statement most appropriately identifies a chemically controlled route to the target?
ⓐ. P is suitable: cyanide adds the needed carbon before formation of the free aromatic amino group.
ⓑ. Q is more controlled because the preformed amino group directs cyanide exclusively to the benzylic carbon.
ⓒ. Both routes give 4-aminobenzoic acid because nitrile hydrolysis removes the original benzylic carbon.
ⓓ. P yields 4-aminobenzamide because cyanide introduces a carboxamide group without any hydrolysis.
Correct Answer: P is suitable: cyanide adds the needed carbon before formation of the free aromatic amino group.
Explanation: The target contains a two-carbon side chain between the aromatic ring and the carboxyl functional group.
The starting benzylic substituent contains only one carbon atom.
Therefore, one additional carbon must be introduced.
\(\textbf{First stage of Route P:}\)
Potassium cyanide substitutes for benzylic bromine through formation of a carbon–carbon bond.
\[
\mathrm{4\!-\!O_2NC_6H_4CH_2Br\xrightarrow{KCN}4\!-\!O_2NC_6H_4CH_2CN}
\]
The nitrile carbon comes from cyanide.
The benzylic methylene carbon remains part of the side chain.
\(\textbf{Convert the nitrile into an acid:}\)
Complete hydrolysis of the nitrile produces 4-nitrophenylacetic acid.
The nitrile carbon becomes the carboxyl carbon.
The side chain therefore contains the required \(\mathrm{-CH_2COOH}\) unit.
\(\textbf{Introduce the aromatic amino group:}\)
Selective reduction converts the remaining nitro group into a primary aromatic amino group.
Under the stipulated compatible conditions, the carboxylic acid group is preserved.
The product is 4-aminophenylacetic acid.
\(\textbf{Evaluate Route Q:}\)
Reduction of the nitro group first generates a free primary aromatic amino group in a molecule still containing a reactive benzylic bromide.
Such a molecule contains both a nucleophilic amino group and an alkylating electrophilic site.
Unprotected amine alkylation and other competing reactions therefore require consideration.
A clean cyanide substitution cannot be assumed solely from the presence of benzylic bromine.
Route P avoids introducing the free amino group until after the carbon skeleton has been constructed.
The preferred sequence combines one-carbon homologation with deliberate control of functional-group compatibility.
504. A compound contains a free primary aromatic amino group and a tertiary aliphatic amino group:
\[
\mathrm{4\!-\!H_2NC_6H_4CH_2N(C_2H_5)_2}
\]
It is subjected to the following sequence:
(i) Diazotisation at the aromatic primary amino site under suitably cold acidic conditions.
(ii) Replacement of the diazonium group with fluorine using the tetrafluoroborate method.
(iii) Treatment of the resulting compound with excess hydrochloric acid, followed by sufficient aqueous sodium hydroxide.
Assume no substitution at the benzylic tertiary amino group and no cleavage of its N–C bonds.
Which statement correctly describes the final neutral organic product?
ⓐ. It contains a primary aromatic amino group and no fluorine because sodium hydroxide reverses diazonium replacement.
ⓑ. It contains one aromatic fluorine substituent and a retained tertiary benzylic amino group; acid treatment reversibly changes the nitrogen protonation state.
ⓒ. It contains a quaternary ammonium centre because hydrochloric acid forms a permanent fourth nitrogen–carbon bond.
ⓓ. It contains a secondary aromatic amino group because diazotisation adds a methyl group onto nitrogen.
Correct Answer: It contains one aromatic fluorine substituent and a retained tertiary benzylic amino group; acid treatment reversibly changes the nitrogen protonation state.
Explanation: The molecule contains two different nitrogen centres.
One nitrogen belongs to a primary aromatic amino group directly attached to benzene.
The other nitrogen is tertiary and is attached to the aromatic framework through a benzylic methylene group.
The stipulated diazotisation selectively acts on the primary aromatic amino group.
\(\textbf{Diazonium formation and fluorination:}\)
The free aromatic amino group is converted into an arenediazonium intermediate at 273–278 K.
The tetrafluoroborate route subsequently replaces the diazonium group with fluorine.
The original aromatic amino nitrogen is therefore removed from the final organic framework.
The fluorine occupies the aromatic position formerly bearing that amino group.
\(\textbf{Behaviour of the retained tertiary amino group:}\)
The benzylic tertiary nitrogen remains bonded to its original three carbon-containing groups.
It has no N–H bond but possesses a lone pair.
Hydrochloric acid protonates that lone pair to produce an ammonium salt.
The resulting nitrogen carries a positive charge but retains its three N–C bonds.
\(\textbf{Effect of alkaline treatment:}\)
Sufficient aqueous sodium hydroxide removes the proton introduced by hydrochloric acid.
The neutral tertiary amine is regenerated.
This ordinary acid–base operation does not reverse the earlier aromatic fluorination.
Therefore, the final product contains a fluorinated aromatic ring and a retained tertiary benzylic amino group.
The sequence illustrates the difference between permanent covalent substitution at an arenediazonium site and reversible proton transfer at another nitrogen centre.
The two transformations must be tracked independently even when they occur within the same molecule.
505. An equimolar mixture of 4-aminophenol and aniline is completely diazotised at 273–278 K.
Under the stipulated conditions, the resulting diazonium groups are stable in the cold solution.
The two diazonium salts are then separated without decomposition.
Each salt is independently coupled quantitatively with one mole equivalent of phenol under conditions favouring para coupling on the added phenol ring.
The resulting neutral azo products are examined for their numbers of phenolic hydroxyl groups.
Which statement correctly compares the products?
ⓐ. Both contain two phenolic hydroxyl groups because phenol always supplies two oxygen atoms during coupling.
ⓑ. The aniline-derived azo product contains two phenolic hydroxyl groups, whereas the aminophenol-derived product contains one.
ⓒ. The aminophenol-derived azo product contains two phenolic hydroxyl groups, whereas the aniline-derived product contains one; both contain one azo linkage.
ⓓ. The aminophenol-derived product contains no phenolic hydroxyl groups because diazotisation removes all oxygen-containing substituents.
Correct Answer: The aminophenol-derived azo product contains two phenolic hydroxyl groups, whereas the aniline-derived product contains one; both contain one azo linkage.
Explanation: Both starting compounds contain one primary aromatic amino group.
Their diazotisation therefore creates one arenediazonium group per molecule.
However, only 4-aminophenol contains an additional phenolic hydroxyl group before diazotisation.
That functional group must be tracked separately.
\(\textbf{Aniline-derived diazonium salt:}\)
Diazotisation converts the aniline amino group into benzenediazonium functionality.
Coupling with phenol introduces a second benzene ring linked through an azo group.
The phenol coupling component retains its hydroxyl substituent.
The resulting neutral monoazo product contains one phenolic hydroxyl group.
\(\textbf{4-Aminophenol-derived diazonium salt:}\)
Diazotisation changes its primary aromatic amino group into a diazonium group.
The original phenolic hydroxyl substituent remains attached to the aromatic ring.
Coupling with a separate phenol molecule introduces another hydroxyl-bearing aromatic fragment.
The resulting monoazo product therefore contains two phenolic hydroxyl groups.
\(\textbf{Compare nitrogen and oxygen retention:}\)
Each azo product contains one \(\mathrm{-N=N-}\) linkage formed from the two nitrogen atoms of its corresponding diazonium group.
The difference lies in the oxygen-containing substituents contributed by the original aromatic amino components.
The aniline-derived fragment contributes no phenolic hydroxyl.
The aminophenol-derived fragment contributes one.
The externally added phenol contributes one hydroxyl in each case.
This example demonstrates why azo products must be analysed by combining the complete structures of both coupling partners.
Counting the diazonium groups alone is insufficient to determine the final number of phenolic hydroxyl groups.
506. Two samples contain equal initial amounts of phenol.
Sample P is coupled with benzenediazonium chloride under suitable alkaline conditions to form p-hydroxyazobenzene.
Sample Q is first converted completely into anisole by O-methylation and is then exposed to the same diazonium coupling reagent under conditions selected for ordinary phenol–diazonium coupling.
Consider the following statements.
Statement I: The transformation of phenol into anisole removes the phenolic O–H proton without removing the aromatic oxygen atom.
Statement II: Phenoxide formation in P increases the ring's suitability for ordinary electrophilic azo coupling.
Statement III: O-Methylation necessarily removes every resonance-donating effect of the oxygen substituent from the aromatic ring.
Statement IV: The reaction conditions established for phenol coupling cannot automatically be assumed to give the same product and rate with anisole.
Which combination is correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: Phenol contains an aromatic hydroxyl group capable of both resonance donation and acid–base ionisation.
Anisole contains an aromatic methoxy group.
The two compounds have related oxygen substituents but different acid–base behaviour.
Statement I is correct because O-methylation replaces the hydrogen of the phenolic hydroxyl group with a methyl group.
The oxygen remains bonded to the aromatic ring.
The product is an aryl ether rather than a phenol.
Statement II is correct because phenoxide is strongly electron donating through resonance.
This increases electron density at suitable aromatic carbon positions and favours ordinary electrophilic azo coupling.
Statement III is incorrect because a methoxy group can still donate electron density to the aromatic ring through oxygen lone-pair resonance.
It is not electronically equivalent to removal of the oxygen substituent.
However, anisole cannot undergo the same phenol-to-phenoxide acid–base conversion because it lacks an O–H bond.
Statement IV is therefore correct.
The conditions and product distribution established for phenol coupling cannot be transferred automatically to its O-methylated ether.
Any proposed anisole coupling must be evaluated on its own substrate and reaction conditions.
The distinction lies in the loss of phenolic ionisation capability, not complete disappearance of oxygen resonance donation.
Substitution of the hydroxyl hydrogen must be distinguished from changes in aromatic electronic activation.
507. A chemist is comparing two routes from nitrobenzene to 4-iodonitrobenzene.
Route P:
(i) Reduce nitrobenzene to aniline.
(ii) Protect the amino group by acetylation.
(iii) Perform controlled nitration favouring the para derivative.
(iv) Remove the acetyl protecting group.
(v) Diazotise the regenerated primary aromatic amino group and replace its diazonium group with iodine.
Route Q:
(i) Attempt direct iodination of nitrobenzene under ordinary electrophilic aromatic substitution conditions.
(ii) Assume the iodine will necessarily enter para to the nitro group.
Which statement correctly evaluates these routes?
ⓐ. P gives mainly 4-iodonitrobenzene; direct iodination in Q is disfavoured by the nitro group's deactivation and meta direction.
ⓑ. Route Q is preferable because nitro is a strongly activating para director.
ⓒ. Both routes necessarily give 3-iodonitrobenzene because diazonium iodide replacement relocates iodine to a meta position.
ⓓ. Route P fails because a protected amino group can never be deprotected before diazotisation.
Correct Answer: P gives mainly 4-iodonitrobenzene; direct iodination in Q is disfavoured by the nitro group's deactivation and meta direction.
Explanation: The required compound contains iodine and nitro at para positions on benzene.
The positional relationship must be established before the original amino substituent is replaced by iodine.
\(\textbf{Construct the para substitution pattern:}\)
Reduction of nitrobenzene gives aniline.
N-Acetylation moderates the strong activating influence of its amino group while retaining ortho/para orientation.
Controlled nitration under the stipulated conditions favours the para nitro derivative.
Deprotection subsequently regenerates the free primary aromatic amino group.
The intermediate is 4-nitroaniline.
\(\textbf{Replace the amino-derived group by iodine:}\)
Diazotisation gives the corresponding 4-nitrobenzenediazonium salt.
Treatment with potassium iodide replaces the diazonium group by iodine.
The para nitro substituent remains attached to its original ring carbon.
The product is 4-iodonitrobenzene.
\(\textbf{Evaluate the direct iodination proposal:}\)
Nitro is strongly electron withdrawing and deactivates the aromatic ring toward electrophilic substitution.
It directs incoming electrophiles predominantly to meta positions under applicable substitution conditions.
Therefore, para iodination cannot be assumed from direct treatment of nitrobenzene.
The proposed direct route lacks the positional control built into Route P.
The successful route uses an amino-derived directing group temporarily and then replaces that group by the desired halogen.
The final substitution pattern is preserved through diazonium replacement rather than being created by direct halogenation of a deactivated nitroaromatic ring.
508. A compound X contains one primary aromatic amino group and one benzylic primary alcohol group:
\[
\mathrm{4\!-\!H_2NC_6H_4CH_2OH}
\]
Two reaction sequences are proposed.
Sequence P:
(i) Diazotise the aromatic amino group and replace the diazonium functionality by bromine.
(ii) Oxidise the primary benzylic alcohol to the corresponding aldehyde under selective conditions.
Sequence Q:
(i) Oxidise the benzylic alcohol to an aldehyde.
(ii) Reduce the aldehyde completely with sodium borohydride.
(iii) Diazotise the aromatic amino group and replace its diazonium functionality by bromine.
Assume no other transformations occur.
Which statement correctly compares the final products?
ⓐ. Both sequences give 4-bromobenzaldehyde because sodium borohydride does not reduce aromatic aldehydes.
ⓑ. P gives 4-bromobenzyl alcohol, whereas Q gives 4-bromobenzaldehyde.
ⓒ. Both sequences give 4-bromobenzyl alcohol because diazonium bromination always reduces benzylic carbonyl groups.
ⓓ. P gives 4-bromobenzaldehyde, whereas Q gives 4-bromobenzyl alcohol because Q reverses its own aldehyde-forming oxidation before bromine replacement.
Correct Answer: P gives 4-bromobenzaldehyde, whereas Q gives 4-bromobenzyl alcohol because Q reverses its own aldehyde-forming oxidation before bromine replacement.
Explanation: The starting compound contains two different functional groups that can be transformed independently under the stipulated selective conditions.
The aromatic primary amino group can undergo diazotisation and halogen replacement.
The benzylic primary alcohol can undergo oxidation to an aldehyde.
\(\textbf{Sequence P:}\)
Diazotisation converts the aromatic amino group into a diazonium functionality.
Sandmeyer bromination replaces the diazonium group with bromine.
The intermediate is 4-bromobenzyl alcohol.
Selective oxidation of its benzylic primary alcohol group gives an aldehyde.
The final product is 4-bromobenzaldehyde.
\(\textbf{Sequence Q:}\)
The benzylic alcohol is first oxidised to an aldehyde.
Sodium borohydride subsequently reduces that aldehyde back to a primary alcohol.
These two operations reverse the oxygen-functional-group transformation under the stated conditions.
The primary aromatic amino group remains available for subsequent diazotisation.
Replacement of the diazonium functionality by bromine gives 4-bromobenzyl alcohol.
\(\textbf{Compare the final oxidation states:}\)
Both sequences replace the aromatic amino group with bromine.
However, P retains the aldehyde generated during oxidation.
Q removes that aldehyde functionality by reduction before the final bromine replacement.
Therefore, their final products differ in the oxidation state of the benzylic carbon.
The distinction cannot be determined simply by noting that both sequences contain an oxidation and a diazonium substitution.
Every later operation must be checked for whether it preserves or reverses an earlier functional-group change.
509. A mixture contains \(0.040\,\mathrm{mol}\) of aniline and \(0.030\,\mathrm{mol}\) of benzene-1,4-diamine.
The entire sample is subjected to complete cold diazotisation of every free primary aromatic amino group.
The resulting diazonium solution is divided into two identical portions.
Portion P undergoes complete replacement of all diazonium groups with hydrogen using hypophosphorous acid.
Portion Q is treated with sufficient phenol under conditions that convert every diazonium group into a separate azo linkage.
Assume all transformations are quantitative, each diazonium replacement by hydrogen evolves one nitrogen molecule and each azo linkage consumes one phenol molecule.
What are the amounts of nitrogen gas evolved from P and phenol consumed by Q, respectively?
ⓐ. \(0.100\,\mathrm{mol}\) and \(0.050\,\mathrm{mol}\).
ⓑ. \(0.070\,\mathrm{mol}\) and \(0.070\,\mathrm{mol}\).
ⓒ. \(0.050\,\mathrm{mol}\) and \(0.070\,\mathrm{mol}\).
ⓓ. \(0.050\,\mathrm{mol}\) and \(0.050\,\mathrm{mol}\).
Correct Answer: \(0.050\,\mathrm{mol}\) and \(0.050\,\mathrm{mol}\).
Explanation: The mixture contains one compound with a single primary aromatic amino group and another with two.
Complete diazotisation therefore creates different numbers of diazonium groups per starting molecule.
The sample is divided only after those groups have been formed.
\(\textbf{Diazonium groups from aniline:}\)
Each aniline molecule contains one primary aromatic amino group.
Therefore:
\[
n_{\mathrm{diazonium,aniline}}=0.040\times1
\]
\[
n_{\mathrm{diazonium,aniline}}=0.040\,\mathrm{mol}
\]
\(\textbf{Diazonium groups from the diamine:}\)
Each molecule of benzene-1,4-diamine contains two primary aromatic amino groups.
Therefore:
\[
n_{\mathrm{diazonium,diamine}}=0.030\times2
\]
\[
n_{\mathrm{diazonium,diamine}}=0.060\,\mathrm{mol}
\]
\(\textbf{Total diazonium amount:}\)
\[
n_{\mathrm{diazonium,total}}=0.040+0.060
\]
\[
n_{\mathrm{diazonium,total}}=0.100\,\mathrm{mol}
\]
\(\textbf{Division into equal portions:}\)
Each half contains:
\[
n_{\mathrm{diazonium,half}}=\frac{0.100}{2}
\]
\[
n_{\mathrm{diazonium,half}}=0.050\,\mathrm{mol}
\]
\(\textbf{Portion P — Replacement by hydrogen:}\)
Hypophosphorous acid replaces each diazonium group with hydrogen.
One nitrogen molecule is evolved for each group replaced.
\[
n_{\mathrm{N_2,P}}=0.050\,\mathrm{mol}
\]
\(\textbf{Portion Q — Azo coupling:}\)
Each diazonium group forms one azo linkage under the stipulated conditions.
One phenol molecule is consumed per azo linkage.
\[
n_{\mathrm{phenol,Q}}=0.050\,\mathrm{mol}
\]
The nitrogen atoms of Q's diazonium groups remain in its azo products rather than being evolved as nitrogen gas.
The calculation therefore distinguishes the number of amino groups from the number of starting molecules and distinguishes nitrogen-eliminating replacement from nitrogen-retaining coupling.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{N_2,P}}=0.050\,\mathrm{mol},\qquad n_{\mathrm{phenol,Q}}=0.050\,\mathrm{mol}}
\]
510. Consider the following assertion and reason.
Assertion (A): Aniline can be converted into fluorobenzene through an arenediazonium tetrafluoroborate intermediate, whereas simply treating aniline with an ordinary alkyl-halide fluorination procedure is not an equivalent synthesis.
Reason (R): Diazotisation creates an aromatic diazonium group that can be replaced by fluorine through the tetrafluoroborate method, while ordinary substitution chemistry of saturated alkyl halides cannot be applied unchanged to an aromatic carbon–nitrogen bond.
Choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The synthesis of fluorobenzene from aniline is an important application of aromatic diazonium chemistry.
The amino group in aniline is attached directly to an aromatic carbon.
It cannot simply be treated as though it were a halogen attached to a saturated alkyl carbon.
Under suitable cold acidic conditions, aniline reacts with nitrous acid to form benzenediazonium chloride.
The diazonium functionality provides a specialised leaving group suitable for several aromatic substitutions.
Treatment with tetrafluoroboric acid converts the salt into the corresponding diazonium tetrafluoroborate.
Controlled thermal decomposition produces fluorobenzene with elimination of molecular nitrogen.
The transformation is known as the Balz–Schiemann reaction.
It is distinct from the ordinary nucleophilic substitution methods used for many saturated alkyl halides.
The aromatic carbon–nitrogen bond in aniline is not itself an ordinary alkyl-halide leaving-group arrangement.
Diazotisation changes the functional-group identity and creates the intermediate required for fluorine introduction.
Therefore, the assertion is correct.
The reason is also correct because it identifies the key change in functional-group reactivity produced by diazotisation.
The explanation does not imply that fluorination of aromatic compounds is impossible by all other methods.
It establishes why the specified diazonium route is chemically appropriate and why an unrelated alkyl-halide procedure is not interchangeable.
511. A synthetic sequence begins with 4-aminobenzoic acid.
The carboxylic acid group is temporarily converted into its methyl ester under suitable conditions, giving methyl 4-aminobenzoate.
The free aromatic amino group is then diazotised at 273–278 K and converted into an aryl iodide by treatment with potassium iodide.
Finally, the methyl ester is hydrolysed completely, followed by acidification.
A student predicts that the final product will be methyl 4-iodobenzoate because the ester group was introduced before diazotisation.
Which statement correctly identifies the actual final product and the role of the temporary ester?
ⓐ. The product is 4-aminobenzoic acid because ester hydrolysis reverses the replacement of the diazonium group by iodine.
ⓑ. 4-Iodobenzoic acid; esterification temporarily protects the acid group, while diazonium iodination replaces the amino group.
ⓒ. The product is methyl 4-iodobenzoate because an ester cannot undergo hydrolysis after an aromatic halogen has been introduced.
ⓓ. The product is benzoic acid because diazotisation removes both the amino group and the carboxyl carbon.
Correct Answer: 4-Iodobenzoic acid; esterification temporarily protects the acid group, while diazonium iodination replaces the amino group.
Explanation: The starting molecule contains two distinct functional groups at para positions.
One is a primary aromatic amino group.
The other is a carboxylic acid group.
The sequence deliberately changes these functionalities by different reaction types.
\(\textbf{Temporary conversion of the carboxyl group:}\)
Esterification converts the carboxylic acid group into a methyl ester.
The carboxyl carbon remains attached to the same aromatic carbon.
The newly introduced methyl group belongs to the ester oxygen.
The aromatic amino group remains free and available for diazotisation.
\(\textbf{Permanent aromatic substitution:}\)
Cold diazotisation converts the primary aromatic amino group into a diazonium functionality.
Potassium iodide replaces that diazonium group with iodine.
The aromatic product at this stage is methyl 4-iodobenzoate.
The amino-derived nitrogen atoms are removed from the organic framework during the replacement.
\(\textbf{Hydrolysis of the temporary ester:}\)
Complete ester hydrolysis removes the methyl ester functionality.
Acidification regenerates the carboxylic acid group.
The original carboxyl carbon is preserved.
The aromatic carbon–iodine bond is stipulated to remain unchanged.
Consequently, the final product is 4-iodobenzoic acid.
The methyl group introduced during esterification is not retained in the final acid.
The diazonium-to-iodine transformation, however, is not reversed by the ester hydrolysis.
This sequence distinguishes a temporary functional-group modification from a permanent substitution on the aromatic ring.
The order of operations matters because it determines which parts of the molecular framework are ultimately retained.
512. Benzenediazonium chloride is divided into two equal portions.
Portion P is treated with excess ethanol under conditions favouring complete replacement of the diazonium group by hydrogen.
Portion Q is treated with excess hypophosphorous acid under conditions producing the same aromatic substitution product.
The reaction mixtures are examined separately for an organic compound capable of reducing Tollens' reagent.
Assume that ethanol is oxidised to ethanal in P and hypophosphorous acid is oxidised to phosphorous acid in Q, as described in NCERT.
Which statement correctly compares the principal products and the origin of the reducing compound?
ⓐ. Both portions give phenol, but only Q produces ethanal.
ⓑ. P gives benzene and methanal, whereas Q gives benzene and ethanal.
ⓒ. P forms benzene and Tollens-positive ethanal; Q forms benzene and phosphorous acid.
ⓓ. Both portions give benzene and ethanal because molecular nitrogen evolution necessarily oxidises water.
Correct Answer: P forms benzene and Tollens-positive ethanal; Q forms benzene and phosphorous acid.
Explanation: Benzenediazonium chloride contains an aromatic diazonium group that can be replaced by hydrogen.
NCERT identifies ethanol and hypophosphorous acid as reducing agents capable of bringing about this transformation.
However, the reducing agents undergo different oxidation reactions.
\(\textbf{Reduction using ethanol:}\)
The diazonium group is replaced by hydrogen, producing benzene.
Molecular nitrogen is eliminated from the aromatic diazonium functionality.
Ethanol serves as the reducing agent and is oxidised to ethanal.
Ethanal contains an aldehyde group and can reduce Tollens' reagent under suitable conditions.
Therefore, the additional organic reducing compound is associated with Portion P.
\(\textbf{Reduction using hypophosphorous acid:}\)
Hypophosphorous acid, \(\mathrm{H_3PO_2}\), also replaces the diazonium group by hydrogen.
Benzene is again formed, accompanied by molecular nitrogen.
The reducing agent is oxidised to phosphorous acid, \(\mathrm{H_3PO_3}\).
This route does not produce ethanal as the specified oxidation product.
\(\textbf{Distinguish product from reagent oxidation:}\)
The aromatic product is identical in the two reactions.
The difference lies in the oxidation products of the reducing agents.
Consequently, identifying benzene alone would not distinguish the pathways.
The additional Tollens-positive organic compound provides the relevant chemical distinction.
The comparison requires following both the fate of the aromatic diazonium group and the oxidation of the reducing reagent.
513. A cold aqueous solution of benzenediazonium chloride is treated with fluoroboric acid.
A precipitate P is isolated without heating.
An identical amount of benzenediazonium chloride is kept as an aqueous chloride solution Q.
The following observations are considered.
Statement I: P contains the tetrafluoroborate counterion and is comparatively less soluble in water than benzenediazonium chloride.
Statement II: P can be handled as though it were an ordinary permanently stable aromatic salt under every heating condition.
Statement III: Controlled heating of P produces fluorobenzene through elimination of molecular nitrogen.
Statement IV: Warming Q with water can produce phenol rather than fluorobenzene.
Statement V: Exchange of the chloride counterion for tetrafluoroborate directly replaces the aromatic diazonium group by fluorine, even before P is heated.
Which combination is correct?
ⓐ. I, II and III only
ⓑ. I, IV and V only
ⓒ. II, III and V only
ⓓ. I, III and IV only
Correct Answer: I, III and IV only
Explanation: The experiment compares two salts containing the same benzenediazonium cation.
Their counterions differ, and the difference affects solubility and subsequent chemical behaviour.
Statement I is correct because benzenediazonium chloride is readily soluble in cold water.
The corresponding diazonium tetrafluoroborate is comparatively water insoluble and can be precipitated.
Statement II is incorrect because greater stability at room temperature does not imply unlimited thermal stability.
Controlled heating is precisely the condition used to decompose the tetrafluoroborate in the Balz–Schiemann reaction.
Statement III is correct because heating the isolated diazonium tetrafluoroborate produces fluorobenzene.
The diazonium group is replaced by fluorine with evolution of molecular nitrogen.
Statement IV is correct because warming an aqueous benzenediazonium chloride solution promotes hydrolysis.
The aromatic product of that pathway is phenol.
Statement V is incorrect because initial counterion exchange does not itself remove the diazonium group from the aromatic carbon.
The tetrafluoroborate initially remains an ionic diazonium salt.
Actual aromatic fluorination occurs during its subsequent thermal decomposition.
Thus, the intermediate's identity, physical behaviour and reaction upon heating must be distinguished from one another.
The difference between P and Q cannot be explained merely by treating chloride and tetrafluoroborate as interchangeable spectator ions under every condition.
514. A student proposes the following sequence to prepare 2-amino-5-bromobenzoic acid from 2-aminobenzoic acid:
(i) Diazotise the aromatic amino group.
(ii) Replace the diazonium group by bromine.
(iii) Introduce an amino group at the aromatic position originally occupied by bromine through ordinary Hofmann bromamide degradation.
Which statement correctly identifies the fundamental difficulty in this proposal?
ⓐ. Diazotisation cannot occur in a molecule containing a carboxylic acid group.
ⓑ. Sandmeyer bromination necessarily removes the carboxyl carbon from the aromatic framework.
ⓒ. Hofmann bromamide degradation converts an aryl bromide directly into a primary aromatic amino group without requiring an amide.
ⓓ. The route replaces the original amino group by bromine; Hofmann degradation requires a primary amide and cannot reverse aryl bromination.
Correct Answer: The route replaces the original amino group by bromine; Hofmann degradation requires a primary amide and cannot reverse aryl bromination.
Explanation: The starting compound is 2-aminobenzoic acid.
Its amino group is directly attached to an aromatic carbon and can undergo diazotisation under suitable conditions.
The neighbouring carboxylic acid functionality does not automatically prohibit diazonium formation.
After diazotisation, a suitable copper-assisted bromination can replace the aromatic diazonium group with bromine.
However, that replacement removes the original amino functionality from the aromatic framework.
The resulting product is a bromobenzoic acid rather than a primary carboxamide.
\(\textbf{Requirement for Hofmann degradation:}\)
Ordinary Hofmann bromamide degradation requires an appropriate \(\mathrm{-CONH_2}\) group.
It converts the primary carboxamide into an amine while removing its carbonyl carbon.
An aryl bromide is not an ordinary Hofmann bromamide substrate.
Therefore, the proposed third step cannot regenerate the desired aromatic amino group simply by applying bromine and alkali.
\(\textbf{Additional positional problem:}\)
The desired target contains an amino group and a bromine atom at different aromatic positions.
Replacing the original amino group by bromine does not establish the additional amino group at the target position.
That would require a separate chemically valid route for introducing nitrogen there.
The proposal therefore fails for both functional-group compatibility and positional-control reasons.
The fundamental error is treating a carbon–bromine bond as though it were a primary amide suitable for Hofmann degradation.
515. A substituted aminobenzoic acid contains one primary aromatic amino group and one carboxylic acid group.
For this question, the following two acid–base equilibria are stipulated to behave independently:
\[
\mathrm{ArNH_3^+\rightleftharpoons ArNH_2+H^+},\qquad \mathrm{p}K_a=4.0
\]
\[
\mathrm{ArCOOH\rightleftharpoons ArCOO^-+H^+},\qquad \mathrm{p}K_a=5.0
\]
Assume ideal solution behaviour and that no other ionisation processes occur.
A buffer maintains the solution at pH 4.5.
Which statement correctly identifies the predominant charge-bearing forms at the two sites and the predominant net molecular charge?
ⓐ. The amino group is predominantly protonated and the carboxyl group predominantly deprotonated, giving a zwitterion of net zero charge.
ⓑ. The amino group is predominantly neutral and the carboxyl group predominantly undissociated, giving a neutral molecule of net zero charge.
ⓒ. The amino group is predominantly protonated and the carboxyl group predominantly undissociated, giving net charge \(+1\).
ⓓ. The amino group is predominantly neutral and the carboxyl group predominantly deprotonated, giving net charge \(-1\).
Correct Answer: The amino group is predominantly neutral and the carboxyl group predominantly undissociated, giving a neutral molecule of net zero charge.
Explanation: The compound contains an amino group and a carboxylic acid group with independently stipulated acid–base equilibria.
Both must be considered when predicting the predominant molecular charge.
The pH lies between the two supplied pKa values.
However, that fact alone does not establish which of the four possible combined protonation states predominates.
\(\textbf{Amino-group equilibrium:}\)
The relevant conjugate acid is the protonated aromatic amino group.
The solution pH of 4.5 exceeds its pKa of 4.0.
Therefore, the neutral \(\mathrm{-NH_2}\) form is favoured over \(\mathrm{-NH_3^+}\).
\(\textbf{Carboxyl-group equilibrium:}\)
The solution pH of 4.5 is below the supplied carboxylic acid pKa of 5.0.
Therefore, the undissociated \(\mathrm{-COOH}\) form is favoured over \(\mathrm{-COO^-}\).
\(\textbf{Combine the predominant states:}\)
Under the independent-site approximation, the most probable combination contains neutral amino and undissociated carboxyl groups.
Neither group carries a formal charge in that molecular form.
Its net charge is consequently zero.
This neutral form must not be confused with the zwitterionic form containing both ammonium and carboxylate groups.
Both would have zero net charge, but their internal protonation states would be different.
The stipulated pKa values distinguish those alternatives.
Each functional group must be assessed individually rather than inferring the complete structure solely from net charge.
516. A mixture contains benzenediazonium chloride and 4-nitrobenzenediazonium chloride.
The total diazonium amount is \(0.100\,\mathrm{mol}\).
Two equal samples of this mixture are treated independently.
Sample P undergoes complete replacement of both diazonium groups by hydrogen using hypophosphorous acid.
Sample Q undergoes complete replacement of both diazonium groups by iodine using potassium iodide.
The organic products from P are separated, and the nitrobenzene recovered from that sample amounts to \(0.018\,\mathrm{mol}\).
Assume quantitative transformations and that the diazonium salts are distributed equally between samples.
What amounts of iodobenzene and 4-iodonitrobenzene are obtained from Q?
ⓐ. \(0.018\,\mathrm{mol}\) and \(0.032\,\mathrm{mol}\), respectively
ⓑ. \(0.064\,\mathrm{mol}\) and \(0.036\,\mathrm{mol}\), respectively
ⓒ. \(0.032\,\mathrm{mol}\) and \(0.018\,\mathrm{mol}\), respectively
ⓓ. \(0.036\,\mathrm{mol}\) and \(0.014\,\mathrm{mol}\), respectively
Correct Answer: \(0.032\,\mathrm{mol}\) and \(0.018\,\mathrm{mol}\), respectively
Explanation: The two diazonium salts differ in whether a nitro substituent is already present on the aromatic ring.
Replacement of the diazonium group does not remove that pre-existing nitro group under the stipulated conditions.
Therefore, the organic products retain information about the original mixture composition.
\(\textbf{Amount of diazonium material in each sample:}\)
The original mixture contains:
\[
n_{\mathrm{total}}=0.100\,\mathrm{mol}
\]
It is divided into two equal representative samples.
Therefore:
\[
n_P=n_Q=\frac{0.100}{2}
\]
\[
n_P=n_Q=0.050\,\mathrm{mol}
\]
\(\textbf{Identify the nitro-containing component:}\)
In P, benzenediazonium chloride gives benzene after replacement by hydrogen.
4-Nitrobenzenediazonium chloride gives nitrobenzene.
Each conversion occurs in a \(1:1\) ratio.
The recovered nitrobenzene therefore identifies the original amount of the nitro-substituted diazonium salt in P:
\[
n_{\mathrm{nitro\ diazonium,P}}=0.018\,\mathrm{mol}
\]
\(\textbf{Determine the unsubstituted component:}\)
\[
n_{\mathrm{benzene\ diazonium,P}}=0.050-0.018
\]
\[
n_{\mathrm{benzene\ diazonium,P}}=0.032\,\mathrm{mol}
\]
\(\textbf{Transfer the composition to Q:}\)
Because Q is an equal representative sample, its component amounts are the same.
Potassium iodide replaces each diazonium group with iodine.
Therefore:
\[
n_{\mathrm{iodobenzene}}=0.032\,\mathrm{mol}
\]
\[
n_{\mathrm{4\!-\!iodonitrobenzene}}=0.018\,\mathrm{mol}
\]
\(\textbf{Check the total product amount:}\)
\[
0.032+0.018=0.050\,\mathrm{mol}
\]
This equals the total diazonium amount in Q.
The calculation uses one substitution experiment to determine the composition required to predict the products of a different substitution experiment.
The aromatic nitro substituent acts as a structural marker retained in both pathways.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{iodobenzene}}=0.032\,\mathrm{mol},\quad n_{\mathrm{4\!-\!iodonitrobenzene}}=0.018\,\mathrm{mol}}
\]
517. Two primary amines, P and Q, have the same molecular formula, \(\mathrm{C_4H_{11}N}\).
P is butan-1-amine, whereas Q is 2-methylpropan-1-amine.
Each is converted into its corresponding benzenesulphonamide using Hinsberg's reagent.
The isolated sulphonamides are subsequently treated with excess aqueous sodium hydroxide.
A student proposes:
Statement I: Both products contain an acidic sulphonamide N–H bond.
Statement II: Both can form alkali-soluble sulphonamide salts under suitable conditions.
Statement III: Their corresponding sulphonamides are constitutionally identical because their nitrogen substitution degrees are identical.
Statement IV: Differences in carbon-chain branching remain present after ordinary N-sulphonylation.
Which combination is correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: P and Q are constitutional isomers of primary aliphatic amines.
Each nitrogen is attached to one alkyl group and two hydrogen atoms.
Ordinary reaction with benzenesulphonyl chloride replaces one nitrogen-bound hydrogen by the benzenesulphonyl group.
Statement I is correct because one N–H bond remains in each primary-amine-derived sulphonamide.
The sulphonyl group withdraws electron density, making that remaining hydrogen appreciably acidic.
Statement II is correct because sodium hydroxide can deprotonate the sulphonamide N–H group.
The resulting ionic salt can be soluble in aqueous alkali under the ordinary Hinsberg-test conditions.
Statement III is incorrect because the original alkyl substituents are different.
Butan-1-yl and 2-methylpropan-1-yl have different carbon connectivity.
Sulphonylation changes the nitrogen substituent but does not rearrange either alkyl skeleton.
Therefore, the two sulphonamides remain distinct constitutional compounds.
Statement IV is correct because the linear and branched carbon skeletons are retained in their respective N-sulphonyl products.
Both products have the same functional-group classification and the same kind of acidic N–H bond.
Nevertheless, equal diagnostic responses do not prove that the original primary amines are identical.
The correct combination distinguishes amine-class identification from constitutional-isomer identification.
518. A nitrile is obtained by treating acetone with hydrogen cyanide under suitable cyanohydrin-forming conditions.
The cyanohydrin is isolated and subsequently treated with excess lithium aluminium hydride, followed by hydrolytic work-up.
Assume the nitrile group is completely reduced while the carbon skeleton and the hydroxyl group are retained.
Which statement correctly identifies the final amino-containing product and the origin of its fourth carbon atom?
ⓐ. 2-Amino-2-methylpropan-1-ol; its fourth carbon comes from acetone.
ⓑ. 1-Amino-2-methylpropan-2-ol; its fourth carbon comes from hydrogen cyanide.
ⓒ. Propan-2-amine; the carbon of hydrogen cyanide is removed during nitrile reduction.
ⓓ. 2-Methylpropan-1-amine; the hydroxyl group is necessarily removed during nitrile reduction.
Correct Answer: 1-Amino-2-methylpropan-2-ol; its fourth carbon comes from hydrogen cyanide.
Explanation: Acetone contains three carbon atoms and a ketone carbonyl group.
Hydrogen cyanide can add across that carbonyl group to produce a cyanohydrin.
The addition introduces a new carbon atom through the cyanide unit.
\(\textbf{Formation of the cyanohydrin:}\)
The acetone carbonyl carbon becomes bonded to hydroxyl and cyano substituents.
The resulting structure is:
\[
\mathrm{(CH_3)_2C(OH)CN}
\]
It contains four carbon atoms.
Three originate from acetone, while the nitrile carbon originates from hydrogen cyanide.
\(\textbf{Reduction of the nitrile:}\)
Lithium aluminium hydride reduces the carbon–nitrogen triple bond to an aminomethyl functionality.
The original nitrile carbon is retained as a methylene carbon.
Under the stipulated selectivity conditions:
\[
\mathrm{(CH_3)_2C(OH)CN\xrightarrow[\text{work-up}]{LiAlH_4}(CH_3)_2C(OH)CH_2NH_2}
\]
The final molecule contains a primary amino group at one end of the carbon framework.
It also retains the hydroxyl group attached to the branched carbon.
\(\textbf{Identify the systematic structure:}\)
Numbering from the amino-bearing methylene carbon gives the structure of 1-amino-2-methylpropan-2-ol.
The amino nitrogen is primary because it is attached to only one carbon-containing group.
The carbon bearing hydroxyl is attached to three carbon atoms, so the hydroxyl group belongs to a tertiary alcohol centre.
\(\textbf{Carbon-source conclusion:}\)
The final fourth carbon comes from the original cyanide carbon.
The reaction demonstrates a one-carbon extension achieved through cyanohydrin formation followed by nitrile reduction.
This differs from simply reducing the ketone carbonyl, which would not introduce an additional carbon atom.
519. A chemist wishes to prepare 4-fluorobenzaldehyde from 4-aminobenzaldehyde.
The following route is proposed:
(i) Convert the primary aromatic amino group into its corresponding diazonium tetrafluoroborate under appropriate cold conditions.
(ii) Heat the isolated diazonium tetrafluoroborate under conditions producing the aryl fluoride.
Assume the aldehyde group is preserved during the stipulated transformations.
A student proposes replacing step (i) with direct treatment of the amino compound with hydrogen fluoride, arguing that fluoride should simply displace the amino group.
Which statement correctly evaluates the proposal?
ⓐ. Direct hydrogen fluoride treatment is equivalent because a free aromatic amino group is already an ordinary leaving group under all conditions.
ⓑ. The diazonium route is unnecessary because aldehyde groups directly supply fluorine during heating.
ⓒ. The diazonium route makes amino replaceable by fluorine; direct hydrogen fluoride treatment does not.
ⓓ. The diazonium route necessarily converts the aldehyde into a carboxylic acid because all diazonium salts are strong oxidising agents.
Correct Answer: The diazonium route makes amino replaceable by fluorine; direct hydrogen fluoride treatment does not.
Explanation: The target requires replacement of an aromatic primary amino group by fluorine.
The aldehyde group must remain attached to the aromatic ring.
The chemical challenge is therefore selective substitution of the amino-derived functionality.
\(\textbf{Why diazotisation is useful:}\)
A free primary aromatic amino group is not equivalent to an ordinary alkyl halide leaving group.
Diazotisation converts it into an arenediazonium functionality under suitably cold acidic conditions.
The resulting diazonium group can participate in reactions involving elimination of molecular nitrogen.
Treatment with tetrafluoroboric acid gives the corresponding diazonium tetrafluoroborate.
Controlled heating then replaces the diazonium group with fluorine.
\(\textbf{Track the other functional group:}\)
The starting molecule also contains an aldehyde group at the para position.
The question explicitly stipulates that this group is preserved.
The aromatic carbonyl carbon therefore remains part of the final product.
The product is 4-fluorobenzaldehyde.
\(\textbf{Evaluate direct hydrogen fluoride treatment:}\)
Simply adding hydrogen fluoride does not reproduce the structural change caused by diazotisation.
The amino group must first be transformed into an appropriate leaving functionality for the specified Balz–Schiemann route.
Acidic protonation of the amino group alone does not guarantee clean replacement of its aromatic carbon–nitrogen bond by fluorine.
The correct route uses the distinctive reactivity of an aromatic diazonium intermediate while preserving the aldehyde substituent.
The explanation requires distinguishing acid–base behaviour of aniline derivatives from covalent aromatic substitution.
520. A sample of 4-nitrobenzenediazonium tetrafluoroborate is divided into two equal portions.
Portion P undergoes controlled thermal decomposition to produce an aryl fluoride.
Portion Q is treated with aqueous sodium nitrite and copper under conditions giving replacement of the diazonium group by nitro.
Assume all existing aromatic nitro groups remain unchanged.
Which statement correctly identifies the products and compares the sources of the nitrogen atoms retained in the organic products?
ⓐ. P gives 1-fluoro-4-nitrobenzene; Q gives 1,4-dinitrobenzene, with Q's newly introduced nitro nitrogen coming from the replacing nitrite reagent.
ⓑ. P gives fluorobenzene; Q gives nitrobenzene because the original para nitro group is removed in both reactions.
ⓒ. P gives 1,4-difluorobenzene; Q gives 4-fluoronitrobenzene because tetrafluoroborate supplies two fluorine substituents.
ⓓ. P gives 1-fluoro-4-nitrobenzene; Q gives 1,4-dinitrobenzene, but Q retains the original two diazonium nitrogen atoms as the newly introduced nitro groups.
Correct Answer: P gives 1-fluoro-4-nitrobenzene; Q gives 1,4-dinitrobenzene, with Q's newly introduced nitro nitrogen coming from the replacing nitrite reagent.
Explanation: The starting compound already contains one nitro group at the para position relative to the diazonium functionality.
The diazonium group is the functionality targeted by both reactions.
The pre-existing nitro group is stipulated to remain unchanged.
\(\textbf{Thermal decomposition of P:}\)
Heating the arenediazonium tetrafluoroborate under appropriate conditions produces an aryl fluoride.
The aromatic diazonium functionality is replaced by fluorine.
The original para nitro substituent is preserved.
Therefore, the product is 1-fluoro-4-nitrobenzene.
The diazonium nitrogen atoms leave the organic framework during this replacement.
\(\textbf{Nitro replacement in Q:}\)
Aqueous sodium nitrite and copper can replace the diazonium group by nitro under the stated conditions.
The previously existing nitro substituent remains at the para position.
The product consequently has nitro substituents at carbons 1 and 4.
It is 1,4-dinitrobenzene.
\(\textbf{Track the nitrogen sources:}\)
The nitro group already present in the starting diazonium salt retains its original nitrogen atom.
The second nitro group is introduced using the nitrite-based replacing reagent.
The original diazonium nitrogen atoms do not become the nitrogen atoms of the newly introduced nitro group.
They are removed during diazonium displacement.
\(\textbf{Compare the products:}\)
Both pathways preserve the original aromatic substitution relationship.
However, they introduce different substituents at the carbon formerly carrying the diazonium group.
The product structures therefore depend on the reagent selected for diazonium replacement, not merely on the common tetrafluoroborate counterion.