401. A substituted aromatic compound contains both a nitro group and a vinyl group:
\[
\mathrm{4\!-\!O_2NC_6H_4CH=CH_2}
\]
The target is 4-vinylaniline, in which the nitro group has been converted into an amino group while the carbon–carbon double bond remains intact.
Two reducing systems are proposed:
P: Iron and hydrochloric acid under conditions selected for nitro-group reduction, followed by alkaline work-up.
Q: Excess hydrogen and a suitable hydrogenation catalyst under conditions known to reduce both nitro groups and ordinary carbon–carbon double bonds completely.
Which statement correctly evaluates the two systems?
ⓐ. P can provide the target selectively, whereas Q would also hydrogenate the vinyl group and therefore need not give 4-vinylaniline.
ⓑ. Q must give the target selectively because hydrogenation catalysts cannot reduce carbon–carbon double bonds.
ⓒ. P necessarily converts the vinyl group into ethyl before reducing the nitro group.
ⓓ. Both give identical products because nitro-group reduction requires breaking the aromatic carbon–vinyl bond.
Correct Answer: P can provide the target selectively, whereas Q would also hydrogenate the vinyl group and therefore need not give 4-vinylaniline.
Explanation: The starting compound contains two independently reducible functionalities.
The nitro group must become an amino group.
The vinyl group's carbon–carbon double bond must remain unchanged.
Therefore, reagent choice must be based on functional-group selectivity, not merely on whether a reagent can reduce a nitro group.
\(\textbf{System P — Metal–acid reduction:}\)
Iron and hydrochloric acid are established reagents for reducing nitro compounds to primary amines.
Under the stated selective conditions, the aromatic nitro group is converted into \(\mathrm{-NH_2}\).
The vinyl group is preserved.
Alkaline work-up liberates the free aromatic amino compound from its protonated form.
The target 4-vinylaniline can consequently be obtained.
\(\textbf{System Q — Complete catalytic hydrogenation:}\)
Hydrogenation catalysts can reduce carbon–carbon double bonds under suitable conditions.
The question explicitly specifies conditions under which both reducible functionalities undergo complete hydrogenation.
Therefore, the vinyl group is converted into an ethyl group.
The nitro group is also converted into an amino group.
The resulting product is 4-ethylaniline rather than 4-vinylaniline.
\(\textbf{Synthetic interpretation:}\)
Both methods can reduce a nitro group, but they do not necessarily preserve the same additional functional groups.
The desired product requires selective nitro reduction.
The stipulated complete hydrogenation conditions of Q are incompatible with retaining the vinyl double bond.
The correct reagent system is selected by considering the entire substrate structure and the complete functional-group inventory of the target.
402. Freshly prepared aniline and an aromatic azo dye are separately stored in transparent containers under ordinary laboratory conditions.
The freshly prepared aniline sample is initially nearly colourless but gradually develops colour on exposure to air.
The azo dye is already coloured before storage.
A student concludes that both colours must arise from the same azo linkage formed during storage.
Which statement correctly evaluates the conclusion?
ⓐ. It is valid because every coloured nitrogen-containing aromatic compound must contain an azo linkage.
ⓑ. It is valid because atmospheric oxygen quantitatively converts aniline into azobenzene under all storage conditions.
ⓒ. It is invalid because aniline cannot undergo atmospheric oxidation under ordinary storage conditions.
ⓓ. It is invalid: aniline can colour on air oxidation, whereas the azo dye already has its extended conjugated azo system.
Correct Answer: It is invalid: aniline can colour on air oxidation, whereas the azo dye already has its extended conjugated azo system.
Explanation: Aniline is an aromatic primary amine whose nitrogen lone pair interacts with the benzene ring.
NCERT states that aniline and other arylamines are usually colourless but can become coloured on storage due to atmospheric oxidation.
Therefore, a colour change in stored aniline is consistent with oxidation occurring during exposure to air.
However, colour development alone does not identify one unique oxidation product.
In particular, it does not prove quantitative conversion into a specified azo compound.
An aromatic azo dye contains the characteristic \(\mathrm{-N=N-}\) linkage connecting conjugated organic fragments.
The extended conjugated structure is associated with the characteristic colour of many azo compounds.
Such a dye may therefore be coloured immediately after its preparation.
The two observations involve different chemical explanations.
One concerns chemical change during storage, while the other concerns the electronic structure of an already formed compound.
The presence of nitrogen and visible colour in both samples does not establish identical molecular structures.
Nor does every coloured nitrogen-containing compound necessarily contain azo nitrogen.
The conclusion must therefore distinguish atmospheric oxidation of arylamines from the formation and optical properties of azo dyes.
403. A chemist wishes to obtain ethanamine from bromoethane by ammonolysis.
The experiment uses \(0.120\,\mathrm{mol}\) of bromoethane and \(0.300\,\mathrm{mol}\) of ammonia under conditions that suppress further alkylation of the initially formed primary amine.
Assume the only organic reaction follows:
\[
\mathrm{C_2H_5Br+2NH_3\longrightarrow C_2H_5NH_2+NH_4Br}
\]
After reaction, excess ammonia is removed and all ethanamine is isolated without loss.
Which statement correctly identifies the limiting reagent and the amounts of ethanamine and ammonium bromide formed?
ⓐ. Ammonia is limiting; \(0.150\,\mathrm{mol}\) ethanamine and \(0.150\,\mathrm{mol}\) ammonium bromide.
ⓑ. Bromoethane is limiting; \(0.120\,\mathrm{mol}\) ethanamine and \(0.120\,\mathrm{mol}\) ammonium bromide.
ⓒ. Bromoethane is limiting; \(0.120\,\mathrm{mol}\) ethanamine and \(0.240\,\mathrm{mol}\) ammonium bromide.
ⓓ. Ammonia is limiting; \(0.100\,\mathrm{mol}\) ethanamine and \(0.200\,\mathrm{mol}\) ammonium bromide.
Correct Answer: Bromoethane is limiting; \(0.120\,\mathrm{mol}\) ethanamine and \(0.120\,\mathrm{mol}\) ammonium bromide.
Explanation: Ammonolysis of bromoethane involves nucleophilic substitution of bromine by an amino group.
The balanced overall equation uses two molecules of ammonia per molecule of bromoethane.
One ammonia molecule supplies the nitrogen-containing portion of ethanamine.
Another accounts for formation of the ammonium bromide by-product.
\(\textbf{Determine the reagent requirement:}\)
From the balanced equation:
\[
1\,\mathrm{mol\ C_2H_5Br}\longrightarrow2\,\mathrm{mol\ NH_3\ required}
\]
For \(0.120\,\mathrm{mol}\) of bromoethane:
\[
n_{\mathrm{NH_3,required}}=2(0.120)
\]
\[
n_{\mathrm{NH_3,required}}=0.240\,\mathrm{mol}
\]
The experiment supplies:
\[
n_{\mathrm{NH_3,available}}=0.300\,\mathrm{mol}
\]
Therefore, ammonia is present in stoichiometric excess.
\(\textbf{Identify the limiting reagent:}\)
Bromoethane is the limiting reagent under the stipulated reaction conditions.
Its entire initial amount is consumed.
\(\textbf{Calculate the two products:}\)
The stoichiometric ratio of bromoethane to ethanamine is \(1:1\).
\[
n_{\mathrm{ethanamine}}=0.120\,\mathrm{mol}
\]
The ratio of bromoethane to ammonium bromide is also \(1:1\).
\[
n_{\mathrm{NH_4Br}}=0.120\,\mathrm{mol}
\]
\(\textbf{Check the remaining ammonia:}\)
\[
n_{\mathrm{NH_3,remaining}}=0.300-0.240
\]
\[
n_{\mathrm{NH_3,remaining}}=0.060\,\mathrm{mol}
\]
The calculation depends on the supplied suppression of further amine alkylation.
Without that condition, ordinary ammonolysis may produce a mixture of nitrogen substitution classes.
The balanced equation therefore gives a determinate answer only because the reaction selectivity is explicitly specified.
\(\textbf{Final answer:}\)
\[
n_{\mathrm{ethanamine}}=n_{\mathrm{NH_4Br}}=0.120\,\mathrm{mol}
\]
404. A chemist compares trimethylamine, trimethylammonium chloride and a quaternary ammonium salt containing one long hydrocarbon chain.
The comparison is intended to connect nitrogen bonding with two applications specifically noted in NCERT: the use of trimethylamine as an insect attractant and the use of quaternary ammonium salts as surfactants.
Which statement correctly distinguishes the three compounds?
ⓐ. Trimethylamine is quaternary because it contains three methyl groups; trimethylammonium chloride contains no nitrogen lone pair because its nitrogen has been oxidised.
ⓑ. All three are neutral tertiary amines because they contain carbon–nitrogen bonds.
ⓒ. Trimethylamine is a neutral tertiary amine with a nitrogen lone pair; its hydrochloride contains a protonated tertiary-ammonium centre; the quaternary ammonium salt contains four N–C bonds and can have amphiphilic surfactant structure.
ⓓ. Trimethylammonium chloride and the quaternary ammonium salt are identical nitrogen functional groups because both carry positive charge, and therefore both must have identical surfactant behaviour.
Correct Answer: Trimethylamine is a neutral tertiary amine with a nitrogen lone pair; its hydrochloride contains a protonated tertiary-ammonium centre; the quaternary ammonium salt contains four N–C bonds and can have amphiphilic surfactant structure.
Explanation: The three compounds contain nitrogen centres but differ in covalent bonding and ionic character.
Trimethylamine has three methyl groups attached to nitrogen.
Its fourth electron-pair region is occupied by a lone pair.
It is therefore a neutral tertiary amine.
NCERT identifies trimethylamine among tertiary amines used as insect attractants.
When trimethylamine reacts with hydrochloric acid, its nitrogen lone pair accepts a proton.
The resulting trimethylammonium ion has three N–C bonds and one N–H bond.
The chloride ion balances its positive charge.
Ordinary treatment with a suitable strong base can regenerate trimethylamine by deprotonation.
A quaternary ammonium ion has four organic substituents bonded to nitrogen.
It possesses no corresponding nitrogen lone pair or N–H bond in its standard tetraalkylammonium structure.
A suitable quaternary ammonium salt may contain a long hydrophobic hydrocarbon chain and a charged nitrogen-containing head group.
This combination can produce amphiphilic behaviour and support surfactant applications.
The mere presence of positive charge does not make trimethylammonium chloride structurally identical to a quaternary ammonium surfactant.
The distinction requires considering both the number of N–C bonds and the overall arrangement of polar and nonpolar molecular regions.
405. Aniline is treated with concentrated sulphuric acid in two experiments.
Experiment P: The mixture is maintained at a temperature insufficient for the standard high-temperature sulphonation, and the initially formed acid–base product is examined.
Experiment Q: The mixture is heated under the NCERT sulphonation conditions of 453–473 K to obtain the principal aromatic sulphonation product.
Which statement correctly compares the products and their chemical characteristics?
ⓐ. P gives principally anilinium hydrogensulphate; Q gives principally sulphanilic acid, whose amino and sulphonic acid groups occupy para positions and which can exist in a zwitterionic form.
ⓑ. P gives principally sulphanilic acid; Q gives principally anilinium hydrogensulphate because heating removes the aromatic sulphonic acid group.
ⓒ. Both P and Q necessarily give 2-aminobenzenesulphonic acid because the amino group is ortho directing.
ⓓ. P gives benzenediazonium hydrogensulphate; Q gives benzenediazonium chloride because sulphuric acid generates nitrous acid on heating.
Correct Answer: P gives principally anilinium hydrogensulphate; Q gives principally sulphanilic acid, whose amino and sulphonic acid groups occupy para positions and which can exist in a zwitterionic form.
Explanation: Aniline contains a basic amino group capable of accepting a proton from a strong acid.
Sulphuric acid can therefore participate in an acid–base reaction before aromatic sulphonation occurs.
\(\textbf{Experiment P — Initial salt formation:}\)
In sufficiently acidic solution, the nitrogen lone pair accepts a proton.
The corresponding acid–base product is anilinium hydrogensulphate.
This initial proton-transfer reaction does not require introducing a new sulphonic acid substituent into the benzene ring.
The ammonium ion contains an N–H bond formed by protonation.
\(\textbf{Experiment Q — High-temperature sulphonation:}\)
NCERT specifies heating aniline with concentrated sulphuric acid at 453–473 K.
Under these conditions, p-aminobenzenesulphonic acid is obtained as the principal product.
It is commonly called sulphanilic acid.
The amino and sulphonic acid substituents occupy para positions.
\(\textbf{Acid–base character of sulphanilic acid:}\)
Sulphanilic acid contains both an amino group and a strongly acidic sulphonic acid group.
Internal proton transfer can produce a zwitterionic structure containing ammonium and sulphonate groups.
This ionic representation should not be confused with anilinium hydrogensulphate, which contains a separate hydrogensulphate counterion.
The two compounds therefore differ in covalent aromatic substitution as well as their ionic descriptions.
Neither experiment is a diazotisation because the required nitrous-acid reagent system is absent.
The correct interpretation follows the temperature-dependent change from initial salt formation to aromatic sulphonation.
406. Methanamine is reacted with ethanoyl chloride in the presence of pyridine under conditions giving complete N-acetylation according to:
\[
\mathrm{CH_3NH_2+CH_3COCl\longrightarrow CH_3CONHCH_3+HCl}
\]
The HCl generated is captured quantitatively by pyridine:
\[
\mathrm{C_5H_5N+HCl\longrightarrow[C_5H_5NH]^+Cl^-}
\]
The initial quantities are:
\[
n_{\mathrm{CH_3NH_2}}=0.150\,\mathrm{mol}
\]
\[
n_{\mathrm{CH_3COCl}}=0.100\,\mathrm{mol}
\]
\[
n_{\mathrm{pyridine}}=0.120\,\mathrm{mol}
\]
Assume the stated transformations are quantitative, with no side reactions.
Which option correctly gives the amounts of N-methylethanamide and pyridinium chloride produced?
ⓐ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.120\,\mathrm{mol}\) pyridinium chloride.
ⓑ. \(0.120\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) pyridinium chloride.
ⓒ. \(0.150\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) pyridinium chloride.
ⓓ. \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) pyridinium chloride.
Correct Answer: \(0.100\,\mathrm{mol}\) N-methylethanamide and \(0.100\,\mathrm{mol}\) pyridinium chloride.
Explanation: The experiment contains an acylation step and a separate acid-capture step.
Methanamine supplies nitrogen to the amide product.
Pyridine acts as a base that removes the HCl generated during acylation.
The two roles must not be confused.
\(\textbf{Determine the acylation extent:}\)
One mole of methanamine reacts with one mole of ethanoyl chloride.
The initial amounts are:
\[
n_{\mathrm{amine}}=0.150\,\mathrm{mol}
\]
\[
n_{\mathrm{acyl\ chloride}}=0.100\,\mathrm{mol}
\]
Ethanoyl chloride is limiting for the stipulated complete reaction.
\(\textbf{Amide formation:}\)
\[
n_{\mathrm{amide}}=0.100\,\mathrm{mol}
\]
The same amount of HCl is generated:
\[
n_{\mathrm{HCl}}=0.100\,\mathrm{mol}
\]
\(\textbf{Capture the generated acid:}\)
Pyridine reacts with HCl in a \(1:1\) ratio.
The initial pyridine amount is \(0.120\,\mathrm{mol}\).
It is therefore sufficient to capture all the generated HCl.
\[
n_{\mathrm{pyridinium\ chloride}}=0.100\,\mathrm{mol}
\]
\(\textbf{Check the unused reactants:}\)
\[
n_{\mathrm{methanamine,remaining}}=0.150-0.100
\]
\[
=0.050\,\mathrm{mol}
\]
\[
n_{\mathrm{pyridine,remaining}}=0.120-0.100
\]
\[
=0.020\,\mathrm{mol}
\]
\(\textbf{Chemical interpretation:}\)
Pyridine helps drive the acylation by removing the acid formed.
However, its presence does not allow the reaction to consume more ethanoyl chloride than initially supplied.
The amount of pyridinium chloride equals the HCl generated in the stipulated single-acylation process.
The numerical result therefore depends on both the limiting acylating reagent and the separate acid-neutralisation stoichiometry.
\(\textbf{Final answer:}\)
\[
\left(n_{\mathrm{amide}},n_{\mathrm{pyridinium\ chloride}}\right)=(0.100,\ 0.100)\,\mathrm{mol}
\]
407. 4-Nitrobenzamide, \(\mathrm{4\!-\!O_2NC_6H_4CONH_2}\), is subjected to two different reaction sequences.
Route P:
(i) Selective reduction of the nitro group to an amino group using suitable metal–acid conditions.
(ii) Hofmann bromamide degradation of the remaining primary amide.
Route Q:
(i) Hofmann bromamide degradation of the primary amide while retaining the nitro group.
(ii) Selective reduction of the remaining nitro group.
Assume every reaction is complete and that the functional groups not targeted in each operation remain unchanged.
Which statement correctly compares the final products and the intermediate amino-group classifications?
ⓐ. Both routes give benzene-1,4-diamine, but P first creates a primary aromatic amino group by nitro reduction, whereas Q first creates one by Hofmann degradation.
ⓑ. P gives 4-aminobenzylamine, whereas Q gives benzene-1,4-diamine because Hofmann degradation retains the carbonyl carbon in P.
ⓒ. Both routes give 4-aminobenzamide because neither reducing system removes a carbon atom.
ⓓ. P gives benzene-1,4-diamine, whereas Q gives 4-nitroaniline because nitro groups cannot be reduced after Hofmann degradation.
Correct Answer: Both routes give benzene-1,4-diamine, but P first creates a primary aromatic amino group by nitro reduction, whereas Q first creates one by Hofmann degradation.
Explanation: The starting molecule contains a nitro group and a primary carboxamide group at para positions.
The stipulated selective conditions allow the two transformations to be considered independently.
\(\textbf{Route P — Reduce nitro first:}\)
Selective reduction converts the aromatic nitro group into an amino group.
The intermediate is 4-aminobenzamide.
The newly formed amino nitrogen is bonded directly to an aromatic carbon.
Therefore, it is a primary aromatic amino group.
\(\textbf{Complete Route P:}\)
Hofmann bromamide degradation removes the carbonyl carbon of the primary carboxamide.
The carboxamide functionality becomes a second aromatic amino group.
The final compound is benzene-1,4-diamine.
\(\textbf{Route Q — Degrade the amide first:}\)
Hofmann degradation of 4-nitrobenzamide produces 4-nitroaniline under the stipulated conditions.
The amide carbonyl carbon is removed.
The new amino group is attached directly to the benzene ring.
\(\textbf{Complete Route Q:}\)
Selective reduction converts the remaining nitro group into a second aromatic amino group.
The product is again benzene-1,4-diamine.
\(\textbf{Compare the synthetic orders:}\)
Both transformations ultimately introduce amino functionality at their respective aromatic positions.
However, they do so through different chemical processes.
Nitro reduction retains the carbon skeleton of the nitro-containing aromatic compound.
Hofmann degradation removes the amide carbonyl carbon.
The final products coincide only because the question explicitly guarantees chemoselectivity and preservation of the other functional group during each operation.
The example demonstrates that different reaction orders can converge on the same product when the individual transformations are compatible.
408. A sample of trimethylamine is divided into two portions.
Portion P is bubbled through excess dilute hydrochloric acid, producing an aqueous solution of trimethylammonium chloride.
Portion Q is treated with excess methyl iodide under conditions giving complete quaternisation.
A chemist then attempts to recover volatile trimethylamine from both products merely by adding aqueous sodium hydroxide and extracting the neutral amine into ether.
Which statement correctly predicts the different outcomes?
ⓐ. Both portions regenerate trimethylamine because hydroxide removes one methyl group whenever nitrogen carries positive charge.
ⓑ. P regenerates trimethylamine through deprotonation, while Q does not regenerate it through the same ordinary acid–base operation because Q contains a fourth N–C bond rather than an N–H bond.
ⓒ. Q regenerates trimethylamine through deprotonation, while P remains permanently quaternary.
ⓓ. Neither portion can regenerate trimethylamine because forming an ammonium ion irreversibly destroys the nitrogen lone pair.
Correct Answer: P regenerates trimethylamine through deprotonation, while Q does not regenerate it through the same ordinary acid–base operation because Q contains a fourth N–C bond rather than an N–H bond.
Explanation: Trimethylamine is a neutral tertiary amine containing three nitrogen–carbon bonds and one available lone pair.
The two reagents react at that lone pair but produce different covalent bonding environments.
\(\textbf{Portion P — Protonation:}\)
Hydrochloric acid converts trimethylamine into trimethylammonium chloride.
The positively charged nitrogen contains three methyl groups and one hydrogen.
Aqueous sodium hydroxide removes the added proton.
The resulting neutral trimethylamine can be separated from the ionic medium under suitable conditions.
\(\textbf{Portion Q — Quaternisation:}\)
Methyl iodide introduces an additional methyl group onto nitrogen.
The resulting tetramethylammonium ion contains four nitrogen–carbon bonds.
It has no nitrogen-bound hydrogen atom available for ordinary deprotonation.
Adding hydroxide therefore does not simply remove the fourth methyl group.
\(\textbf{Structural and physical consequences:}\)
The neutral trimethylamine obtained from P differs in volatility and solvation behaviour from the ionic salts.
However, Q remains a quaternary ammonium species under the stipulated acid–base treatment.
The distinction is not based merely on the presence of positive charge.
It follows from whether the fourth bond formed at nitrogen is an N–H bond or an N–C bond.
The correct reasoning combines nitrogen connectivity, acid–base reversibility and the physical basis of amine recovery.
409. A substituted nitrobenzene has the structure:
\[
\mathrm{4\!-\!O_2NC_6H_4CH_2N(CH_3)_2}
\]
The compound is treated with iron and hydrochloric acid under conditions that selectively reduce the aromatic nitro group to an amino group while preserving the benzylic tertiary amino centre.
After sufficient alkaline work-up, the isolated product P is treated separately with chloroform and ethanolic potassium hydroxide and with benzenesulphonyl chloride under ordinary test conditions.
Which statement correctly predicts its nitrogen functionalities and the most relevant reaction outcomes?
ⓐ. P contains two tertiary amino groups; both give ordinary positive carbylamine reactions.
ⓑ. P contains one primary aliphatic amino group and one secondary aromatic amino group; both undergo ordinary neutral N-sulphonylation.
ⓒ. P contains one primary aromatic amino group and one tertiary benzylic amino centre; the primary group can give the carbylamine reaction and undergo ordinary N-sulphonylation.
ⓓ. P contains one primary amide and one tertiary aromatic amino group; neither reacts with benzenesulphonyl chloride.
Correct Answer: P contains one primary aromatic amino group and one tertiary benzylic amino centre; the primary group can give the carbylamine reaction and undergo ordinary N-sulphonylation.
Explanation: The starting molecule contains a nitro group and a tertiary amino group at different positions of the carbon framework.
Its nitro group is attached directly to the benzene ring.
Its tertiary amino nitrogen is attached through a benzylic methylene carbon.
These functional groups must be classified independently.
\(\textbf{Selective nitro reduction:}\)
Iron and hydrochloric acid convert the aromatic nitro group into an amino group.
The newly formed nitrogen is directly bonded to a benzene-ring carbon.
It therefore becomes a primary aromatic amino group.
\(\textbf{Existing tertiary centre:}\)
The benzylic nitrogen remains bonded to two methyl groups and one methylene group.
It possesses no nitrogen-bound hydrogen atom.
It remains a tertiary amino centre after suitable alkaline work-up.
\(\textbf{Carbylamine behaviour:}\)
The new primary aromatic amino group possesses the required primary-amine structure.
It can give a positive carbylamine reaction with chloroform and ethanolic potassium hydroxide under suitable conditions.
The tertiary amino centre does not independently give the ordinary positive reaction.
\(\textbf{Sulphonylation behaviour:}\)
The primary aromatic amino group contains N–H bonds and can undergo ordinary reaction with benzenesulphonyl chloride.
The tertiary benzylic amino group lacks N–H and does not form the corresponding ordinary neutral sulphonamide.
Consequently, the two nitrogens respond differently despite being present in the same molecule.
The correct prediction requires distinguishing reduction of a nitro group from alteration of an already existing tertiary amine.
It also shows how a new primary-amine diagnostic response can appear without changing the original tertiary nitrogen connectivity.
410. Consider the following sequence beginning with 1-bromo-2-methylpropane:
\[
\mathrm{(CH_3)_2CHCH_2Br
\xrightarrow{KCN}P
\xrightarrow{LiAlH_4,\ work\!-\!up}Q}
\]
A second sample of the same alkyl bromide undergoes Gabriel phthalimide synthesis under suitable conditions to give R.
Assume complete substitution through the carbon end of cyanide in the first pathway and no rearrangement in either pathway.
Which statement correctly identifies Q and R and compares their parent carbon skeletons?
ⓐ. Q is 2-methylpropan-1-amine and R is 3-methylbutan-1-amine because nitrile reduction removes its carbon.
ⓑ. Both Q and R are 2-methylpropan-1-amine because neither reaction introduces a new carbon atom.
ⓒ. Both Q and R are 3-methylbutan-1-amine because the Gabriel reagent supplies one extra carbon atom.
ⓓ. Q is 3-methylbutan-1-amine and R is 2-methylpropan-1-amine because cyanide substitution adds one carbon atom while Gabriel substitution does not.
Correct Answer: Q is 3-methylbutan-1-amine and R is 2-methylpropan-1-amine because cyanide substitution adds one carbon atom while Gabriel substitution does not.
Explanation: The starting alkyl bromide contains four carbon atoms.
Its bromine atom is attached to a primary saturated carbon.
Therefore, it is a suitable substrate for the stipulated nucleophilic substitution pathways.
\(\textbf{Potassium cyanide pathway:}\)
Potassium cyanide introduces a cyano group through its carbon end.
\[
\mathrm{(CH_3)_2CHCH_2Br+KCN\longrightarrow (CH_3)_2CHCH_2CN+KBr}
\]
The nitrile product contains five carbon atoms.
Its nitrile carbon is newly introduced by cyanide.
Complete lithium aluminium hydride reduction converts the nitrile carbon into a methylene carbon attached to a primary amino group.
\[
\mathrm{(CH_3)_2CHCH_2CN\xrightarrow[\text{work-up}]{LiAlH_4}(CH_3)_2CHCH_2CH_2NH_2}
\]
The product Q is 3-methylbutan-1-amine.
\(\textbf{Gabriel pathway:}\)
Potassium phthalimide substitutes for bromine at the original carbon bearing the leaving group.
Subsequent cleavage liberates the corresponding primary amine.
The amine nitrogen becomes attached to the original terminal carbon of the four-carbon alkyl framework.
The product R is:
\[
\mathrm{(CH_3)_2CHCH_2NH_2}
\]
This compound is 2-methylpropan-1-amine.
\(\textbf{Compare the carbon counts:}\)
Q contains five carbon atoms because the cyanide reagent supplies an additional carbon.
R contains four carbon atoms because Gabriel synthesis replaces the leaving group with a nitrogen-containing functionality without extending the alkyl skeleton.
Both products are primary amines, but they are not constitutional isomers because their molecular formulas differ.
The correct route selection depends on whether the target requires carbon-chain extension in addition to primary amino-group formation.
411. The aqueous pKb values of six aliphatic amines at 298 K are given below.
| Amine | \(\mathrm{p}K_b\) |
|---|
| Methanamine | 3.38 |
| Dimethylamine | 3.27 |
| Trimethylamine | 4.22 |
| Ethanamine | 3.29 |
| Diethylamine | 3.00 |
| Triethylamine | 3.25 |
A student proposes the following statements.
Statement I: Dimethylamine is more basic than trimethylamine in aqueous solution, although trimethylamine contains more methyl groups.
Statement II: Triethylamine is more basic than ethanamine in aqueous solution, whereas trimethylamine is less basic than methanamine.
Statement III: Diethylamine is the strongest aqueous base among the six compounds listed.
Statement IV: Since primary, secondary and tertiary amines contain different numbers of N–H bonds, the aqueous basicity order must be identical for every alkyl-substituted family.
Which combination is correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and III only
Explanation: The data represent two different alkyl-substituted amine families.
A smaller pKb indicates a larger Kb and hence a stronger aqueous base.
Statement I is correct because dimethylamine has pKb 3.27, whereas trimethylamine has pKb 4.22.
The tertiary amine therefore has lower aqueous basicity despite possessing an additional electron-releasing methyl group.
Statement II is correct because triethylamine has pKb 3.25, which is smaller than the value 3.29 for ethanamine.
The corresponding methyl-substituted comparison is reversed: methanamine has pKb 3.38, smaller than the value 4.22 for trimethylamine.
This reversal prevents the use of a universal degree-only basicity rule.
Statement III is correct because diethylamine has the smallest pKb among all six entries.
It is therefore the strongest aqueous base in the supplied set.
Statement IV is incorrect because aqueous basicity is not governed solely by the number of nitrogen-bound hydrogen atoms.
Electron-releasing inductive effects influence nitrogen electron density and conjugate-acid stability.
Hydration, steric accessibility and the structure of the alkyl groups also affect the observed equilibria.
Consequently, the methyl and ethyl families need not show identical internal basicity orders.
The correct interpretation combines numerical comparison with the chemical factors responsible for the different trends.
412. A chemist wishes to prepare prop-2-en-1-amine, \(\mathrm{CH_2=CHCH_2NH_2}\), by Gabriel phthalimide synthesis.
Four possible halogen-containing substrates are available:
P: \(\mathrm{CH_2=CHCH_2Br}\)
Q: \(\mathrm{CH_2=CHBr}\)
R: \(\mathrm{CH_3CHBrCH_3}\)
S: \(\mathrm{CH_3CH_2CH_2Br}\)
Assume that suitable substitution conditions preserve any pre-existing carbon–carbon double bond and that subsequent cleavage of the N-alkylphthalimide derivative is complete.
Which statement correctly identifies the appropriate substrate and explains why the closest structural alternatives fail?
ⓐ. Q is appropriate because its bromine is attached directly to an unsaturated carbon, allowing formation of the required three-carbon primary amine.
ⓑ. R is appropriate because replacing bromine at carbon 2 automatically creates a terminal amino group and a carbon–carbon double bond.
ⓒ. S is appropriate because Gabriel synthesis introduces one carbon–carbon double bond during phthalimide cleavage.
ⓓ. P is appropriate because substitution occurs at its saturated allylic carbon, preserving the double bond and placing nitrogen at the required terminal position.
Correct Answer: P is appropriate because substitution occurs at its saturated allylic carbon, preserving the double bond and placing nitrogen at the required terminal position.
Explanation: The required product contains three carbon atoms and one carbon–carbon double bond.
Its amino group is attached to a saturated terminal methylene carbon.
Therefore, a suitable Gabriel substrate must possess a leaving group at that carbon.
P is allyl bromide, \(\mathrm{CH_2=CHCH_2Br}\).
Its bromine atom is bonded to a saturated allylic carbon rather than directly to an alkene carbon.
Potassium phthalimide can substitute at that carbon under appropriate conditions.
Subsequent cleavage produces prop-2-en-1-amine while preserving the stipulated double bond.
Q is vinyl bromide.
Its bromine atom is attached directly to an \(sp^2\)-hybridised carbon.
It is unsuitable for the ordinary alkyl-halide substitution pathway of Gabriel synthesis.
R is a secondary alkyl bromide containing a saturated three-carbon skeleton.
Even if substitution occurs, it places nitrogen at carbon 2 and does not create the required double bond.
S is a primary alkyl bromide suitable for ordinary substitution, but its saturated carbon skeleton gives propan-1-amine.
Gabriel cleavage does not independently introduce a carbon–carbon double bond.
Thus, substrate P alone provides both the required carbon connectivity and the unsaturation of the target.
The distinction depends on the position of the leaving group, not merely on the presence of three carbon atoms.
413. A mixture contains only glycine, \(\mathrm{NH_2CH_2COOH}\), and methanamine, \(\mathrm{CH_3NH_2}\).
The mixture is treated with sufficient nitrous acid under conditions giving the following quantitative transformations:
\[
\mathrm{NH_2CH_2COOH+HNO_2\longrightarrow HOCH_2COOH+N_2+H_2O}
\]
\[
\mathrm{CH_3NH_2+HNO_2\longrightarrow CH_3OH+N_2+H_2O}
\]
Exactly \(0.120\,\mathrm{mol}\) of nitrogen gas is evolved.
After removing all residual nitrous acid, the organic products are treated with excess sodium hydrogencarbonate.
Exactly \(0.045\,\mathrm{mol}\) of carbon dioxide is collected.
Assume methanol does not consume sodium hydrogencarbonate under these conditions and glycolic acid releases one mole of carbon dioxide per mole.
What were the original amounts of glycine and methanamine, respectively?
ⓐ. \(0.075\,\mathrm{mol}\) and \(0.045\,\mathrm{mol}\)
ⓑ. \(0.045\,\mathrm{mol}\) and \(0.075\,\mathrm{mol}\)
ⓒ. \(0.045\,\mathrm{mol}\) and \(0.120\,\mathrm{mol}\)
ⓓ. \(0.060\,\mathrm{mol}\) and \(0.060\,\mathrm{mol}\)
Correct Answer: \(0.045\,\mathrm{mol}\) and \(0.075\,\mathrm{mol}\)
Explanation: Both starting compounds contain primary aliphatic amino groups.
Each liberates one mole of nitrogen gas per mole during the specified nitrous-acid reaction.
However, only glycine also contains a carboxylic acid group.
That difference provides a second, independent measurement after the first reaction.
\(\textbf{Use the total nitrogen evolution:}\)
Let x be the original amount of glycine and y the original amount of methanamine.
The specified nitrogen stoichiometry gives:
\[
x+y=0.120
\]
\(\textbf{Identify the organic products:}\)
Glycine produces hydroxyethanoic acid, commonly called glycolic acid.
Methanamine produces methanol.
Glycolic acid retains its carboxylic acid group.
Methanol contains an alcohol group but no carboxylic acid group.
\(\textbf{Use the sodium hydrogencarbonate reaction:}\)
\[
\mathrm{HOCH_2COOH+NaHCO_3\longrightarrow HOCH_2COONa+CO_2+H_2O}
\]
The stoichiometric ratio of glycolic acid to carbon dioxide is \(1:1\).
Therefore:
\[
x=n_{\mathrm{CO_2}}
\]
\[
x=0.045\,\mathrm{mol}
\]
\(\textbf{Determine the methanamine amount:}\)
\[
y=0.120-x
\]
\[
y=0.120-0.045
\]
\[
y=0.075\,\mathrm{mol}
\]
\(\textbf{Verify both measurements:}\)
\[
n_{\mathrm{N_2}}=0.045+0.075
\]
\[
n_{\mathrm{N_2}}=0.120\,\mathrm{mol}
\]
Only the glycolic acid portion contributes the specified carbon dioxide:
\[
n_{\mathrm{CO_2}}=0.045\,\mathrm{mol}
\]
The two observations are complementary because nitrogen evolution alone cannot distinguish the two primary amines.
Removing residual nitrous acid before the second treatment is essential to the stipulated interpretation.
\(\textbf{Final answer:}\)
\[
\boxed{\left(n_{\mathrm{glycine}},n_{\mathrm{methanamine}}\right)=(0.045,\ 0.075)\,\mathrm{mol}}
\]
414. A molecule P contains a primary aromatic amino group and a carboxylic acid group at para positions:
\[
\mathrm{4\!-\!H_2NC_6H_4COOH}
\]
Another molecule Q contains a secondary aromatic amino group and the same carboxylic acid group:
\[
\mathrm{4\!-\!CH_3NHC_6H_4COOH}
\]
Both are separately treated with benzenesulphonyl chloride under conditions giving complete ordinary sulphonylation at any available N–H site.
The isolated derivatives are subsequently treated with aqueous sodium hydroxide and then acidified.
A student claims that precipitation on acidification proves that the original amine was primary.
Which statement correctly evaluates the claim?
ⓐ. The claim is valid because secondary amines cannot form sulphonamides containing a carboxylic acid group.
ⓑ. The claim is valid because an alkali-soluble N-sulphonyl derivative must retain an N–H bond.
ⓒ. The claim is unjustified: both derivatives may dissolve by forming carboxylate salts, irrespective of sulphonamide N–H.
ⓓ. The claim is not justified because neither aromatic amino group can react with benzenesulphonyl chloride.
Correct Answer: The claim is unjustified: both derivatives may dissolve by forming carboxylate salts, irrespective of sulphonamide N–H.
Explanation: The ordinary Hinsberg test depends on differences between primary- and secondary-amine sulphonamides.
However, P and Q contain additional acidic functionality that can affect the same solubility observations.
P is a primary aromatic amine and has two N–H bonds.
Sulphonylation replaces one N–H hydrogen and gives a sulphonamide retaining an acidic N–H bond.
Q is secondary and possesses only one N–H bond before reaction.
Its N-sulphonyl derivative contains no N–H bond.
In a simple molecule without other acidic groups, this distinction helps explain the usual differing solubilities in alkali.
Both compounds in the question also contain a carboxylic acid group.
Sodium hydroxide can deprotonate that group and produce a carboxylate salt in either derivative.
Thus, both derivatives can become soluble through a mechanism independent of sulphonamide N–H acidity.
On subsequent acidification, the carboxylate can regenerate the corresponding carboxylic acid.
The observation of precipitation therefore cannot uniquely establish the original amine substitution degree.
A correct structural assignment must account for all functional groups capable of producing the observed acid–base behaviour.
A standard qualitative test may be misleading if additional functional groups can interfere.
415. An optically active sample of butan-2-yl bromide is divided into two portions.
Pathway P: The alkyl bromide undergoes complete substitution with ammonia through an exclusively \(S_N2\) pathway, followed by liberation of the free amine.
Pathway Q: The alkyl bromide undergoes complete substitution with potassium cyanide through an exclusively \(S_N2\) pathway, followed by complete nitrile reduction using \(\mathrm{LiAlH_4}\).
Assume that neither pathway involves racemisation or rearrangement and that reduction of the nitrile does not alter the stereogenic carbon.
Which statement correctly compares the final products?
ⓐ. P gives butan-2-amine, whereas Q gives 2-methylbutan-1-amine; both pathways involve inversion at the original carbon–bromine stereogenic centre during substitution.
ⓑ. P gives butan-1-amine, whereas Q gives pentan-1-amine; both pathways retain the original configuration during substitution.
ⓒ. P gives butan-2-amine, whereas Q gives pentan-2-amine; the nitrile carbon is inserted between the original two central carbon atoms.
ⓓ. P and Q both give butan-2-amine because complete nitrile reduction removes the carbon originally introduced by cyanide.
Correct Answer: P gives butan-2-amine, whereas Q gives 2-methylbutan-1-amine; both pathways involve inversion at the original carbon–bromine stereogenic centre during substitution.
Explanation: Butan-2-yl bromide has a stereogenic carbon bonded to bromine, hydrogen, methyl and ethyl groups.
Both proposed substitutions are explicitly specified to proceed through an \(S_N2\) pathway.
Such substitution involves backside attack and inversion of spatial arrangement at the reacting carbon.
\(\textbf{Pathway P — Direct amino-group introduction:}\)
Ammonia substitutes for bromine at carbon 2.
After liberation of the neutral amine, the product is butan-2-amine.
The original four-carbon skeleton remains unchanged.
The stereogenic carbon remains bonded to hydrogen, methyl, ethyl and nitrogen-containing substituents.
\(\textbf{Pathway Q — Cyanide chain extension:}\)
Potassium cyanide introduces a nitrile group through its carbon end.
The immediate product is:
\[
\mathrm{CH_3CH(CN)CH_2CH_3}
\]
The cyanide carbon forms a new carbon–carbon bond to the original stereogenic carbon.
This substitution also involves inversion under the stipulated \(S_N2\) conditions.
\(\textbf{Reduction of the nitrile:}\)
\[
\mathrm{CH_3CH(CN)CH_2CH_3\xrightarrow[\text{work-up}]{LiAlH_4}CH_3CH(CH_2NH_2)CH_2CH_3}
\]
Selecting the longest chain containing the amino-bearing carbon gives 2-methylbutan-1-amine.
The final product contains five carbon atoms rather than four.
The stereogenic carbon remains present under the specified conditions.
The inversion statement concerns spatial substitution at the original centre; an absolute R/S label should not be assigned without checking how substituent priorities change.
Thus, the two routes differ in carbon count while sharing the stipulated stereochemical course of the substitution step.
416. Three substituted anilines are subjected separately to controlled electrophilic bromination under conditions permitting introduction of only one bromine atom per molecule.
P is aniline.
Q is 2,6-dimethylaniline.
R is 2,4,6-trimethylaniline.
Assume that the amino group remains neutral and strongly activates positions ortho and para to itself, and that substitution at occupied aromatic positions does not occur.
Which statement correctly assesses the preferred available sites?
ⓐ. All three compounds must brominate at the para position because amino is para directing under every structural condition.
ⓑ. R must brominate at an occupied ortho position by displacing a methyl group, since meta substitution is impossible in all aromatic reactions.
ⓒ. P and Q have no available activated positions because their amino nitrogens are primary.
ⓓ. P has available ortho and para positions; Q has an available para position; R has no unoccupied ortho or para position relative to its amino group.
Correct Answer: P has available ortho and para positions; Q has an available para position; R has no unoccupied ortho or para position relative to its amino group.
Explanation: The free amino group activates the aromatic ring through nitrogen lone-pair resonance donation.
This donation particularly increases the electron density at the ortho and para positions.
However, directing preference must be considered together with the occupancy of those positions.
In P, both ortho positions and the para position are initially unoccupied.
Under controlled single-bromination conditions, the reagent can attack suitable activated positions.
In Q, methyl groups already occupy both positions ortho to the amino group.
The para position remains available.
Therefore, the para position is the principal available site favoured by the amino directing influence.
In R, both ortho positions and the para position contain methyl groups.
None of the ordinarily favoured ortho/para positions is vacant.
This does not prove that R is incapable of every aromatic substitution under all conceivable conditions.
It establishes that the stipulated ordinary ortho/para pathway lacks an available position without additional chemistry.
The problem explicitly excludes displacement of methyl substituents.
The correct conclusion therefore combines amino-group resonance activation with positional availability.
The distinction is important because the strength of an activating group does not permit a new substituent to occupy an aromatic carbon already bearing another substituent without an appropriate replacement mechanism.
417. Two aromatic compounds are compared:
P: 2-Methylbenzenamine.
Q: N-Methylbenzenamine.
Each is separately treated with ethanoyl chloride and pyridine under conditions allowing complete ordinary N-acetylation.
The acetylated products are then subjected to controlled aromatic bromination.
Which statement correctly describes the different locations of their original methyl groups and the nitrogen functionalities after acetylation?
ⓐ. Both P and Q have methyl attached directly to nitrogen, so both give identical N,N-disubstituted amides.
ⓑ. P initially contains a tertiary amino nitrogen, while Q contains a primary amino nitrogen.
ⓒ. P gives an N-acetyl derivative retaining a ring methyl group and an amide N–H bond; Q gives an N-methyl-N-acetyl derivative lacking an amide N–H bond.
ⓓ. Acetylation converts the ring methyl group of P into an N-methyl group through migration, making both products identical.
Correct Answer: P gives an N-acetyl derivative retaining a ring methyl group and an amide N–H bond; Q gives an N-methyl-N-acetyl derivative lacking an amide N–H bond.
Explanation: The two starting compounds have the same molecular formula but different methyl-group attachment positions.
P is o-toluidine, a ring-methyl-substituted primary aromatic amine.
Its nitrogen is directly attached to the benzene ring and contains two N–H bonds.
Q is N-methylaniline, a secondary aromatic amine.
Its nitrogen is bonded to phenyl, methyl and hydrogen.
\(\textbf{Acetylation of P:}\)
One nitrogen-bound hydrogen is replaced by an acetyl group.
The resulting amide nitrogen retains one N–H bond.
The original methyl group remains attached to the aromatic ring at the ortho position.
The product is an N-acetyl derivative of o-toluidine.
\(\textbf{Acetylation of Q:}\)
Q possesses only one N–H bond.
Acetylation replaces that hydrogen with an acetyl group.
The product is an N-methyl-N-acetyl derivative with no amide N–H bond.
Its methyl group remains attached to nitrogen rather than being transferred to the benzene ring.
\(\textbf{Consequences for subsequent bromination:}\)
Both products contain amide nitrogens conjugated with carbonyl groups.
However, only the product from P also contains a pre-existing aromatic methyl substituent.
That substituent changes the positions available on its ring.
Therefore, identical molecular formulas and the use of identical acetylating reagents do not guarantee identical aromatic substitution products.
The key distinction is the original location of the methyl group and the number of N–H bonds present before and after acetylation.
418. Consider the following assertion and reason.
Assertion (A): Diethylamine can have a lower aqueous pKb than triethylamine even though triethylamine has one additional electron-releasing ethyl group.
Reason (R): Aqueous amine basicity depends on the stability of both the free amine and its protonated form, and hydration and steric accessibility can modify the effect predicted from alkyl-group electron donation alone.
Given the NCERT values \(\mathrm{p}K_b(\text{diethylamine})=3.00\) and \(\mathrm{p}K_b(\text{triethylamine})=3.25\), choose the correct option.
ⓐ. Both A and R are true, and R correctly explains A.
ⓑ. Both A and R are true, but R does not correctly explain A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R correctly explains A.
Explanation: The assertion concerns experimental aqueous basicity rather than the isolated inductive effect of alkyl groups.
Diethylamine is a secondary amine, while triethylamine is tertiary.
Adding an ethyl group generally increases electron release toward nitrogen.
If that were the only relevant factor, the tertiary amine would be expected to be stronger.
However, the supplied pKb values establish the actual aqueous comparison.
Diethylamine has pKb 3.00, smaller than 3.25 for triethylamine.
It is therefore the stronger base in water under the specified conditions.
The observed equilibrium reflects more than the electron density of the unprotonated nitrogen.
Protonated amines interact with water through hydration.
The accessibility of the charged nitrogen environment and the steric arrangement of surrounding alkyl groups influence that stabilisation.
The relative stability of the neutral and protonated forms consequently determines the equilibrium basicity.
Thus, the reason correctly identifies why an inductive-effect-only prediction may fail.
Both the assertion and reason are true, and the reason explains the assertion.
The distinction also shows why basicity trends in aqueous solution should not be copied uncritically from gas-phase comparisons.
419. A molecule contains one primary amino group and one tertiary amino group:
\[
\mathrm{H_2NCH_2CH_2N(C_2H_5)_2}
\]
An initial sample is treated with exactly one equivalent of ethanoyl chloride under conditions that selectively acetylate the primary amino group and leave the tertiary nitrogen covalently unchanged.
The resulting compound P is treated with excess hydrochloric acid.
Finally, sufficient aqueous sodium hydroxide is added to regenerate any protonated tertiary amino group without hydrolysing the amide.
Which statement correctly describes the final organic molecule?
ⓐ. It contains two primary amino groups because hydroxide removes the acetyl group.
ⓑ. It contains one neutral amide nitrogen and one neutral tertiary amino nitrogen, with the original N-acetyl group retained.
ⓒ. It contains one secondary amino nitrogen and one permanently quaternary ammonium nitrogen.
ⓓ. It contains two tertiary amino nitrogens because acetylation increases the substitution degree of every nitrogen atom.
Correct Answer: It contains one neutral amide nitrogen and one neutral tertiary amino nitrogen, with the original N-acetyl group retained.
Explanation: The starting molecule has two chemically distinct nitrogen centres.
The terminal \(\mathrm{-NH_2}\) group is primary.
The other nitrogen is bonded to two ethyl groups and the ethylene-chain carbon.
It is a tertiary amine.
\(\textbf{Selective N-acetylation:}\)
The primary amino group reacts with ethanoyl chloride through replacement of a nitrogen-bound hydrogen.
It becomes an amide nitrogen directly connected to a carbonyl group.
The tertiary nitrogen has no N–H bond and does not undergo the same ordinary neutral-amide-forming reaction.
The intermediate therefore contains one amide nitrogen and one tertiary amino nitrogen.
\(\textbf{Treatment with hydrochloric acid:}\)
The tertiary nitrogen can accept a proton through its lone pair.
The resulting ammonium centre contains an additional N–H bond but retains the original N–C bonds.
The amide nitrogen is much less basic because of its carbonyl resonance.
\(\textbf{Final alkaline treatment:}\)
Sodium hydroxide removes the proton added to the tertiary amino centre.
Under the stipulated conditions, it does not hydrolyse the amide.
Therefore, the N-acetyl group remains attached to the first nitrogen.
The final compound contains a neutral amide functionality and a neutral tertiary amino group.
The reaction sequence changes protonation state reversibly at one nitrogen without reversing the covalent acylation at the other.
The correct prediction depends on distinguishing N–H replacement from acid–base proton transfer within the same molecule.
420. Two aromatic compounds are subjected to ordinary carbylamine testing and subsequently to N-acetylation:
P: 4-Aminobenzyl alcohol, \(\mathrm{4\!-\!H_2NC_6H_4CH_2OH}\).
Q: N-(4-Hydroxymethylphenyl)ethanamide, \(\mathrm{4\!-\!HOCH_2C_6H_4NHCOCH_3}\).
Assume the hydroxymethyl group remains unchanged during the specified diagnostic reactions.
Which statement correctly distinguishes their nitrogen functionalities and the expected outcomes?
ⓐ. Both are primary aromatic amines because each nitrogen is bonded to an aromatic ring.
ⓑ. P and Q must give identical N-acetylation products because both contain the same total number of oxygen atoms.
ⓒ. Q gives a positive carbylamine test because the amide nitrogen retains one N–H bond.
ⓓ. P is a free primary aromatic amine giving the carbylamine reaction; Q is an amide and does not.
Correct Answer: P is a free primary aromatic amine giving the carbylamine reaction; Q is an amide and does not.
Explanation: The structures contain the same aromatic hydroxymethyl substituent but have different nitrogen functional groups.
P contains a free \(\mathrm{-NH_2}\) group directly attached to the benzene ring.
It is therefore a primary aromatic amine.
Q contains nitrogen directly attached to an acetyl carbonyl carbon.
It is an amide rather than a free primary aromatic amine.
The distinction cannot be determined solely from whether nitrogen is connected to a phenyl group.
\(\textbf{Carbylamine behaviour:}\)
P possesses the primary amino functionality required for the ordinary carbylamine reaction.
It can react with chloroform and ethanolic potassium hydroxide under suitable conditions to form an isocyanide.
Q does not contain a free primary amino group.
Its amide N–H bond does not make it equivalent to aniline for the carbylamine test.
\(\textbf{Acetylation comparison:}\)
P contains nitrogen-bound hydrogens available for ordinary N-acetylation.
Q is already an N-acetyl derivative.
The two compounds therefore have different starting roles in an acetylation sequence.
The hydroxymethyl substituent is stipulated to remain unchanged and cannot account for the nitrogen-specific test difference.
The correct classification must identify direct attachment of nitrogen to an acyl carbonyl carbon before applying the ordinary amine identification reactions.