501. Two independent protein preparations undergo denaturation.
P is a native globular protein that loses its regular folded structure when heated.
Q is another native globular protein whose folding is disturbed by a substantial change in pH.
In both preparations, the original peptide bonds remain intact.
The denatured samples are then completely hydrolysed into their constituent amino acids.
The amino acids are recovered without chemical decomposition.
Consider the following statements.
Statement I: The heating treatment of P can disturb its secondary and tertiary structures.
Statement II: The pH treatment of Q can change interactions stabilising its native conformation.
Statement III: The later complete hydrolysis destroys peptide connectivity that survived the initial denaturation.
Statement IV: The amino acid compositions recovered after complete hydrolysis must differ from those of the original proteins merely because denaturation occurred.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and III only
Explanation: Statement I is correct because heating can disturb hydrogen bonding and other interactions involved in maintaining native protein structure. Such changes may cause alpha-helical regions to uncoil and globular structures to unfold. Statement II is correct because changing pH can alter the ionisation of suitable amino acid side chains. This may influence electrostatic attractions and other interactions stabilising the native conformation. Both treatments can consequently produce protein denaturation. Statement III is correct because the question explicitly states that peptide bonds survive the initial denaturation. Complete hydrolysis performed afterwards is a different chemical process that cleaves those bonds and releases constituent amino acids. Statement IV is incorrect because denaturation does not necessarily change the identity or number of amino acid residues in a protein. Under the specified conditions, the original amino acid constituents can therefore be recovered after complete hydrolysis. The distinction between denaturation and hydrolysis is essential. Denaturation changes higher-order organisation and can impair biological activity, whereas complete hydrolysis destroys the original peptide connectivity. The correct combination recognises the different structural levels involved in successive treatments.
502. A plant-derived sample contains three carbohydrate fractions P, Q and R.
| Fraction | Observation |
| P | Water-soluble, essentially unbranched glucose polymer with α-(1→4) linkages |
| Q | Water-insoluble, branched glucose polymer containing α-(1→4) and α-(1→6) linkages |
| R | Structural glucose polymer containing β-(1→4) linkages |
An enzyme selectively cleaves α-(1→6) glycosidic linkages without acting on α-(1→4) or β-(1→4) linkages.
Which statement correctly predicts its direct effect on the fractions?
ⓐ. It hydrolyses the main-chain linkages of P but leaves every branch-forming linkage of Q intact.
ⓑ. It selectively cleaves branch-forming linkages in Q while leaving the specified linkages of P and R unchanged.
ⓒ. It hydrolyses R completely because beta linkages are more susceptible to every carbohydrate-hydrolysing enzyme.
ⓓ. It hydrolyses P and R completely but leaves Q intact because branched polymers cannot undergo selective cleavage.
Correct Answer: It selectively cleaves branch-forming linkages in Q while leaving the specified linkages of P and R unchanged.
Explanation: P has the characteristic features of amylose, the essentially unbranched component of starch. It contains α-(1→4) glycosidic linkages but lacks the specified α-(1→6) branch connections. Q resembles amylopectin, which contains α-(1→4) segments and α-(1→6) branch-forming linkages. R resembles cellulose, whose glucose residues are connected through β-(1→4) linkages. The enzyme is explicitly defined by its selectivity for α-(1→6) connections. Therefore, only Q contains the particular glycosidic linkage targeted by the reagent. Cleavage of those connections can modify the branching organisation of Q without necessarily hydrolysing every α-(1→4) segment. P contains no specified linkage susceptible to the treatment. R also lacks α-(1→6) linkages and is therefore not directly affected under the defined conditions. The fact that all three are glucose polymers does not establish identical enzyme susceptibility. Linkage position and anomeric configuration determine which glycosidic bonds are available to a selective enzyme. The conclusion therefore follows from comparing molecular connectivity rather than merely identifying the common glucose constituent.
503. Two ordinary double-stranded DNA fragments have the same overall nucleotide composition.
P contains one particular sequence arrangement.
Q contains a different sequence arrangement formed by exchanging the positions of selected base pairs without changing the total numbers of A–T and G–C pairs.
Both fragments retain ordinary complementarity at every position.
The sugar–phosphate backbones are chemically intact, and both fragments contain the same number of nucleotides.
An analytical method measures only the total numbers of purine and pyrimidine bases.
A second method compares the actual nucleotide sequences.
Which conclusion is correct?
ⓐ. The first method must distinguish P and Q because changing nucleotide order always changes the number of purines.
ⓑ. Q cannot retain ordinary complementary pairing because its base-pair order differs from P.
ⓒ. The first method can give identical results, but the sequence-sensitive method distinguishes their different nucleotide orders.
ⓓ. The fragments must be enantiomers because they contain the same molecular constituents in different orders.
Correct Answer: The first method can give identical results, but the sequence-sensitive method distinguishes their different nucleotide orders.
Explanation: DNA contains two complementary polynucleotide strands joined through interstrand hydrogen bonds. Its primary structure is associated with the ordered sequence of nucleotides along each strand. The total base composition provides only a summary of how many adenine, guanine, cytosine and thymine units are present. In the question, P and Q possess the same overall nucleotide composition and base-pair counts. Therefore, an analytical method that measures only total purine and pyrimidine numbers can report identical values for the two samples. However, changing the order of base pairs can change the primary nucleotide sequences. The second method is designed to detect those positional differences. Ordinary complementarity can remain intact because the exchanged base pairs are transferred as properly paired units. Thus, the change does not necessarily create mismatches or alter the sugar–phosphate backbone. The fragments are not enantiomers merely because their nucleotide sequences differ. The distinction underlies the importance of DNA sequence information in identifying differences that are invisible to simple compositional analysis. The correct conclusion separates chemical composition from ordered molecular structure.
504. A nutrition researcher records the following four observations:
| Case | Observation |
| P | Increased blood clotting time |
| Q | Soft bones and joint pain in an adult |
| R | Bleeding gums associated with scurvy |
| S | Night blindness and xerophthalmia |
The researcher wishes to identify the vitamin associated with each deficiency and classify the vitamins according to solubility.
Which combination is correct?
ⓐ. P—K, Q—D, R—C, S—A; three fat-soluble vitamins and one water-soluble vitamin
ⓑ. P—C, Q—D, R—K, S—A; two fat-soluble vitamins and two water-soluble vitamins
ⓒ. P—K, Q—A, R—C, S—D; three fat-soluble vitamins and one water-soluble vitamin
ⓓ. P—E, Q—D, R—B₁₂, S—A; four fat-soluble vitamins
Correct Answer: P—K, Q—D, R—C, S—A; three fat-soluble vitamins and one water-soluble vitamin
Explanation: Vitamin K plays an important role in normal blood clotting. NCERT associates its deficiency with increased blood clotting time, identifying P. Vitamin D is associated with proper bone development and maintenance. Its deficiency can produce osteomalacia in adults, which involves soft bones and joint pain. Therefore, Q corresponds to vitamin D. Vitamin C deficiency produces scurvy, including bleeding gums, so R corresponds to vitamin C. Vitamin A deficiency is associated with night blindness and xerophthalmia, identifying S. Vitamins A, D, E and K belong to the fat-soluble group. Among the four identified vitamins, A, D and K are therefore fat-soluble. Vitamin C belongs to the water-soluble group. The four deficiency conditions do not arise from a single common chemical function. Their identification requires the specific NCERT associations rather than merely knowing that vitamins are essential dietary substances. The final solubility classification must be applied only after determining the vitamin identities. The result involves three fat-soluble vitamins and one water-soluble vitamin.
505. An ordinary linear peptide P contains one cysteine residue and one methionine residue.
A second identical copy of P is present in the same reaction mixture.
A mild oxidising treatment selectively joins the two free cysteine thiol groups through one interchain disulphide linkage.
The methionine thioether groups remain unchanged.
No peptide bond is hydrolysed or newly formed during the treatment.
A subsequent selective reducing treatment cleaves only the new disulphide linkage.
Which statement correctly describes the molecular changes?
ⓐ. Oxidation creates a methionine thioether cross-link, and reduction must then cleave the peptide backbones.
ⓑ. Oxidation produces two separate cystine molecules but does not connect the peptide chains.
ⓒ. Oxidation joins the intact peptides through cysteine disulphide bonding; selective reduction separates them without peptide cleavage.
ⓓ. Oxidation converts each cysteine thiol to a terminal oxidised sulphur group, so the two peptide chains remain separate.
Correct Answer: Oxidation joins the intact peptides through cysteine disulphide bonding; selective reduction separates them without peptide cleavage.
Explanation: Cysteine possesses a side-chain thiol group that can undergo suitable oxidation to form a disulphide linkage. The two peptide molecules each contain one free cysteine thiol group. The specified reaction therefore joins these groups through an interchain sulphur–sulphur bond. Because the cysteine residues belong to different peptide molecules, formation of the disulphide linkage connects the two intact chains into one covalently associated assembly. The reaction does not create a new peptide bond because it does not involve condensation between an alpha-amino and alpha-carboxyl group. Methionine contains a thioether side chain rather than a free thiol group. Its sulphur atom therefore does not participate in the specifically defined disulphide-forming reaction. The subsequent reducing treatment cleaves the newly formed disulphide bridge. This can separate the two peptide chains again. The problem explicitly excludes peptide-bond cleavage throughout both operations. Consequently, the amino acid sequence of each original chain remains intact. The experiment distinguishes reversible modification of an interchain stabilising bond from hydrolysis of the primary peptide backbone.
506. A double-stranded DNA molecule contains 40 base pairs.
Its total number of interstrand hydrogen bonds is 92.
Each A–T pair contributes two hydrogen bonds, while each G–C pair contributes three.
A hypothetical mutation replaces one A–T pair with one G–C pair while preserving ordinary complementarity.
A second independent mutation then replaces two G–C pairs with two A–T pairs.
No change occurs in the total number of base pairs.
Which pair gives the original number of G–C pairs and the final number of interstrand hydrogen bonds?
ⓐ. 12 G–C pairs originally and 93 hydrogen bonds finally
ⓑ. 12 G–C pairs originally and 91 hydrogen bonds finally
ⓒ. 13 G–C pairs originally and 91 hydrogen bonds finally
ⓓ. 13 G–C pairs originally and 90 hydrogen bonds finally
Correct Answer: 12 G–C pairs originally and 91 hydrogen bonds finally
Explanation: \(\textbf{Base-pair inventory:}\)
Let \(g\) be the number of G–C pairs and \(a\) the number of A–T pairs.
The molecule contains 40 pairs.
\[
a+g=40
\]
\(\textbf{Hydrogen-bond condition:}\)
\[
2a+3g=92
\]
\(\textbf{Solving the original composition:}\)
\[
a=40-g
\]
Substitution gives:
\[
2(40-g)+3g=92
\]
\[
80-2g+3g=92
\]
\[
g=12
\]
Therefore:
\[
a=40-12=28
\]
\(\textbf{First mutation:}\)
One A–T pair is replaced by one G–C pair.
The hydrogen-bond count increases by one.
\[
N_{\mathrm{H,after\ first}}=92+1
\]
\[
N_{\mathrm{H,after\ first}}=93
\]
\(\textbf{Second mutation:}\)
Two G–C pairs are replaced by two A–T pairs.
Each replacement decreases the count by one hydrogen bond.
\[
N_{\mathrm{H,final}}=93-2
\]
\[
N_{\mathrm{H,final}}=91
\]
\(\textbf{Independent base-pair verification:}\)
The final G–C pair count is:
\[
g_{\mathrm{final}}=12+1-2=11
\]
The final A–T pair count is:
\[
a_{\mathrm{final}}=28-1+2=29
\]
Therefore:
\[
N_{\mathrm{H,final}}=2(29)+3(11)
\]
\[
N_{\mathrm{H,final}}=58+33=91
\]
Both methods agree.
\(\textbf{Final answer:}\)
\[
\boxed{12\ \mathrm{G-C\ pairs\ originally};\quad91\ \mathrm{hydrogen\ bonds\ finally}}
\]
507. A biochemical system contains three hormone-related components:
P is a polypeptide hormone involved in lowering elevated blood glucose concentration.
Q is another hormone with a broadly opposing effect on blood glucose.
R is a steroid hormone class associated with regulation of water and salt excretion by the kidneys.
A student argues that all three hormones must have identical chemical structures because they participate in maintaining the body's internal balance.
Which statement correctly identifies the components and evaluates the argument?
ⓐ. P is insulin, Q glucagon and R mineralocorticoids; regulatory roles do not make them chemically identical.
ⓑ. P is glucagon, Q is insulin and R consists of glucocorticoids; all three lower blood glucose.
ⓒ. P is insulin, Q is thyroxine and R consists of sex hormones; all three are polypeptide hormones.
ⓓ. P is maltase, Q is sucrase and R consists of mineralocorticoids; all three act as digestive enzymes.
Correct Answer: P is insulin, Q glucagon and R mineralocorticoids; regulatory roles do not make them chemically identical.
Explanation: Insulin is a polypeptide hormone associated with lowering elevated blood glucose concentration. Therefore, P corresponds to insulin. Glucagon has a broadly opposing effect because it tends to increase blood glucose concentration. Consequently, Q corresponds to glucagon. Mineralocorticoids are steroid hormones produced by the adrenal cortex. They participate in regulation of water and salt excretion by the kidneys, identifying R. These three substances are all involved in chemical coordination of biological activity. However, their specific regulatory functions differ. Insulin and glucagon influence blood glucose in opposing directions. Mineralocorticoids principally regulate a different set of physiological quantities in the stated NCERT discussion. Shared hormonal function therefore does not establish identical chemical structure or identical biological action. Insulin is a polypeptide, while mineralocorticoids are steroids. Enzymes such as maltase and sucrase catalyse chemical reactions and should not be confused with the specified regulatory hormones. The correct conclusion requires combining chemical classification, endocrine function and the direction of physiological regulation.
508. A researcher compares three kinds of information obtained from a purified protein.
| Experiment | Result |
| P | Complete hydrolysis gives the amounts of each constituent amino acid. |
| Q | Selective partial hydrolysis yields ordered peptide fragments whose overlapping sequences can be identified. |
| R | A structural examination reveals how multiple folded polypeptide subunits associate within the native protein. |
Consider the following conclusions.
Statement I: P can establish amino acid composition but cannot, by itself, establish the original sequence.
Statement II: Q can provide information about primary structure that is not retained in the unordered complete hydrolysate.
Statement III: R provides information about quaternary organisation.
Statement IV: The information obtained from P necessarily establishes the native tertiary structure.
Statement V: A difference in quaternary organisation can exist even when total amino acid compositions are identical.
Which statements are correct?
ⓐ. I, II, III and IV only
ⓑ. II, III, IV and V only
ⓒ. I, II, III and V only
ⓓ. I, III, IV and V only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because complete hydrolysis breaks peptide bonds and releases the constituent amino acids. The resulting mixture can reveal which amino acids were present and in what amounts, but it no longer preserves their ordered connectivity. Statement II is correct because suitable partial-hydrolysis fragments retain local sequence information. Overlapping ordered fragments can consequently provide evidence for the original primary amino acid sequence. Statement III is correct because quaternary structure concerns the spatial arrangement of two or more polypeptide subunits in a protein. Experiment R directly examines that organisation. Statement IV is incorrect because amino acid composition alone does not specify the full native three-dimensional fold. Different residue orders can share the same amino acid composition, and higher-order folding depends on structural relationships not recovered from an unordered hydrolysate. Statement V is correct because proteins with identical total residue compositions can differ in the number, arrangement or association of their constituent chains. Therefore, quaternary organisation cannot be inferred uniquely from total amino acid composition. The three experiments provide complementary information at different levels of structural resolution. Their results should be combined rather than treated as interchangeable measurements of protein structure.
509. An ordinary linear tetrapeptide P contains one glutamine residue, one asparagine residue and two alanine residues.
Glutamine and asparagine each contain one side-chain carboxamide group.
Treatment I selectively hydrolyses both side-chain carboxamide groups, converting glutamine-derived and asparagine-derived residues into glutamic-acid-derived and aspartic-acid-derived residues, respectively.
No peptide bond is broken during Treatment I.
Treatment II subsequently hydrolyses every peptide bond of the modified tetrapeptide.
Under strongly basic conditions, every free carboxyl group is assumed to be deprotonated, while amino groups are neutral.
Neither alanine residue contains an additional ionisable side-chain group.
Which statement correctly gives the number of ammonia molecules released during Treatment I per molecule of P and the total negative charge of the final free amino acid products under the specified strongly basic conditions?
ⓐ. Two ammonia molecules and a total charge of \(-4\)
ⓑ. One ammonia molecule and a total charge of \(-5\)
ⓒ. Three ammonia molecules and a total charge of \(-6\)
ⓓ. Two ammonia molecules and a total charge of \(-6\)
Correct Answer: Two ammonia molecules and a total charge of \(-6\)
Explanation: \(\textbf{Side-chain transformations:}\)
Glutamine contains one side-chain carboxamide group.
Asparagine also contains one side-chain carboxamide group.
The selective hydrolysis converts these groups into carboxyl groups without breaking the peptide backbone.
Each side-chain amide hydrolysis releases one ammonia molecule.
\[
N_{\mathrm{NH_3}}=1+1
\]
\[
N_{\mathrm{NH_3}}=2
\]
\(\textbf{Composition after Treatment I:}\)
The intact modified tetrapeptide contains glutamic-acid-derived, aspartic-acid-derived and two alanine residues.
Its four residues remain connected through three peptide bonds.
The side-chain transformations introduce two additional free carboxyl groups.
\(\textbf{Effect of complete peptide hydrolysis:}\)
Treatment II breaks all three peptide bonds.
The resulting free amino acids are glutamic acid, aspartic acid and two alanine molecules.
Each free amino acid contributes one alpha-carboxyl group.
\[
N_{\alpha\text{-COOH}}=4
\]
Glutamic acid and aspartic acid each contribute one additional side-chain carboxyl group.
\[
N_{\mathrm{side-chain\ COOH}}=2
\]
\(\textbf{Strongly basic charge balance:}\)
All six free carboxyl groups are deprotonated under the specified conditions.
Amino groups are neutral.
\[
N_{\mathrm{COO^-}}=4+2
\]
\[
N_{\mathrm{COO^-}}=6
\]
Each contributes one negative charge.
\[
q_{\mathrm{total}}=-6
\]
\(\textbf{Chemical consistency:}\)
Ammonia liberation occurs during side-chain deamidation, whereas the later peptide hydrolysis regenerates alpha-amino and alpha-carboxyl groups.
These are distinct hydrolysis processes and must be counted separately.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{NH_3}}=2;\qquad q_{\mathrm{total}}=-6}
\]
510. Two purified carbohydrates P and Q each contain six carbon atoms.
| Observation | P | Q |
| Open-chain carbonyl position | C1 | C2 |
| Reaction with hydroxylamine | Forms an oxime | Forms an oxime |
| Oxidation with bromine water under suitable mild conditions | Forms a monocarboxylic acid | No corresponding direct oxidation of the ketonic group |
| Reducing behaviour under suitable alkaline conditions | Positive | Positive |
A student concludes that both substances must be aldohexoses because both form oximes and behave as reducing sugars.
Which statement correctly evaluates the conclusion?
ⓐ. The conclusion is correct because ketones cannot form oximes with hydroxylamine.
ⓑ. P is consistent with an aldohexose and Q with a ketohexose; the common reactions do not erase the distinction established by carbonyl position and mild oxidation.
ⓒ. Both must be ketohexoses because every monosaccharide showing reducing behaviour under alkaline conditions has its carbonyl at C2.
ⓓ. P and Q must be identical because oxime formation uniquely establishes the carbonyl position and stereochemical configuration.
Correct Answer: P is consistent with an aldohexose and Q with a ketohexose; the common reactions do not erase the distinction established by carbonyl position and mild oxidation.
Explanation: An aldohexose contains six carbon atoms and an aldehydic group in its open-chain form. A ketohexose contains six carbon atoms and a ketonic group. P has its carbonyl at C1 and is therefore consistent with an aldohexose such as glucose. Q has its carbonyl at C2 and is consistent with a ketohexose such as fructose. Hydroxylamine can react with both suitable aldehydes and ketones to produce oximes. Consequently, oxime formation alone does not determine whether a monosaccharide is an aldose or a ketose. Under the specified mild conditions, bromine water oxidises the aldehydic group of an aldose to a carboxyl group. It does not directly oxidise the corresponding ketonic group of the ketohexose in the same way. However, fructose can also display reducing behaviour under suitable alkaline conditions. This is consistent with transformations that permit a reducing reaction under those conditions. The student's reasoning incorrectly treats a reducing-sugar test as an exclusive test for an initially present aldehydic group. The correct classification requires interpreting carbonyl position, reagent conditions and observed products together.
511. An ordinary globular protein contains a region stabilised by electrostatic attraction between the side chains of lysine and aspartic acid.
The lysine side chain is initially positively charged, while the aspartic acid side chain is negatively charged.
Treatment P replaces the aspartic acid residue with asparagine, preserving the peptide-bond connectivity.
Treatment Q, performed on a separate sample, lowers the pH sufficiently to protonate the original aspartate side-chain carboxylate.
Neither treatment breaks peptide bonds.
The resulting interactions are examined without assuming any additional structural rearrangement.
Which statement correctly compares the treatments?
ⓐ. P replaces an amino acid and alters primary structure; Q changes ionisation without changing residue order.
ⓑ. P and Q both necessarily hydrolyse the protein because asparagine is not an alpha-amino acid.
ⓒ. P preserves the original negative charge because every side-chain amide is a carboxylate, whereas Q increases its negative charge.
ⓓ. Both treatments must introduce an additional peptide bond because neutralisation of a charged side chain requires condensation.
Correct Answer: P replaces an amino acid and alters primary structure; Q changes ionisation without changing residue order.
Explanation: Aspartic acid contains an additional carboxyl group in its side chain. Under the initial conditions, this group is negatively charged and can attract a positively charged lysine side chain. Such electrostatic interactions may contribute to stabilising protein tertiary structure. Asparagine differs from aspartic acid because its corresponding side-chain functional group is a carboxamide. Replacing aspartic acid with asparagine changes the amino acid identity at that position. Therefore, Treatment P changes primary structure even though peptide-bond connectivity remains intact. The asparagine side-chain amide does not carry the original carboxylate negative charge. Treatment Q instead changes the protonation state of the existing aspartic acid side chain. Protonation neutralises the negative charge without replacing the residue. Consequently, Q need not change the primary amino acid sequence. Both treatments can remove the original attraction between oppositely charged side chains. However, they produce different chemical changes and need not have identical effects on overall folding. The conclusion illustrates the distinction between residue substitution and an environmental change in side-chain ionisation.
512. A carbohydrate sample contains two ordinary linear chains, P and Q.
P contains six D-glucose residues joined by five α-(1→4) glycosidic linkages.
Q contains six D-glucose residues joined by five β-(1→4) glycosidic linkages.
Each chain contains one free reducing end.
A selective enzyme cleaves exactly two α-(1→4) linkages in P and no β-(1→4) linkage in Q.
The cleavages occur at two distinct internal positions.
No monosaccharide is degraded.
Which statement correctly compares the products?
ⓐ. P and Q each form three carbohydrate fragments because they have equal molecular formulas.
ⓑ. P produces three carbohydrate fragments while Q remains one chain; the six original glucose residues are conserved in each sample.
ⓒ. P produces two carbohydrate fragments while Q produces three because β-(1→4) linkages hydrolyse spontaneously.
ⓓ. P produces six free glucose molecules while Q remains unchanged because cleavage of any α-(1→4) bond causes complete depolymerisation.
Correct Answer: P produces three carbohydrate fragments while Q remains one chain; the six original glucose residues are conserved in each sample.
Explanation: Both P and Q are glucose-based oligosaccharides with six residues per molecule. However, their glycosidic linkages have different anomeric configurations. P contains α-(1→4) connections, while Q contains β-(1→4) connections. The enzyme is explicitly selective for the alpha linkage. Therefore, it can act on P but not on Q under the stated conditions. P begins as one connected, non-cyclic chain. Cleavage of one internal glycosidic linkage produces two fragments. Cleavage of a second distinct internal linkage produces three fragments. The enzyme is not stated to cleave the remaining three connections, so complete release of all six glucose units is not justified. Q retains its five β-(1→4) linkages and therefore remains one connected chain. Neither treatment changes the total number of glucose-derived residues. This result demonstrates that equal molecular formulas and constituent monosaccharides do not imply identical enzyme susceptibility. The number of fragments must be inferred from actual bond cleavage, while the direction of enzyme selectivity follows from glycosidic configuration.
513. A vitamin mixture contains A, B₁, B₂, B₁₂, C, D, E and K.
The mixture is divided into fat-soluble and water-soluble fractions according to the NCERT classification.
A researcher then examines the water-soluble fraction and identifies the vitamin associated with pernicious anaemia.
A second researcher examines the fat-soluble fraction and identifies the vitamin associated with increased blood clotting time.
Assume that separation causes no chemical change or loss.
Which identification is correct?
ⓐ. The water-soluble fraction contains B₁₂, associated with pernicious anaemia; the fat-soluble fraction contains K, associated with normal blood clotting.
ⓑ. The water-soluble fraction contains vitamin K, associated with pernicious anaemia; the fat-soluble fraction contains vitamin B₁₂.
ⓒ. Both vitamins occur in the fat-soluble fraction because their biological effects concern blood.
ⓓ. Both vitamins occur in the water-soluble fraction because every vitamin required for a blood-related function is water-soluble.
Correct Answer: The water-soluble fraction contains B₁₂, associated with pernicious anaemia; the fat-soluble fraction contains K, associated with normal blood clotting.
Explanation: NCERT classifies vitamins A, D, E and K as fat-soluble. The B-group vitamins and vitamin C belong to the water-soluble category. Therefore, vitamin B₁₂ is present in the water-soluble fraction of the stated mixture. NCERT associates deficiency of B₁₂ with pernicious anaemia. This identifies the vitamin sought by the first researcher. Vitamin K is fat-soluble and occurs in the other fraction. It is associated with normal blood clotting, and its deficiency produces increased blood clotting time. This identifies the substance sought by the second researcher. The two vitamins have distinct chemical classifications despite both being associated with blood-related biological observations. Vitamin B₁₂ is also a recognised exception to the general lack of storage of water-soluble vitamins. That storage qualification does not change its solubility class. The experiment therefore requires separate use of solubility, deficiency association and biological function. Similarity in the general context of a deficiency manifestation does not make two vitamins chemically interchangeable.
514. Three samples contain peptide-related material.
| Sample | Constitution |
| P | An ordinary linear tripeptide containing three glycine residues |
| Q | Three separate free glycine molecules |
| R | A mixture of one glycylglycine molecule and one free glycine molecule |
Each sample contains the same total number of glycine-derived units.
A reagent quantitatively hydrolyses every peptide bond without modifying the liberated amino acids.
Which statement correctly compares the peptide-bond counts before treatment and the products afterwards?
ⓐ. P, Q and R initially contain two peptide bonds each, and all yield glycylglycine.
ⓑ. P initially contains two peptide bonds, Q contains none and R contains one; all can yield three free glycine molecules after complete hydrolysis.
ⓒ. P initially contains three peptide bonds, Q contains none and R contains two; all yield a cyclic tripeptide.
ⓓ. P and R initially contain identical peptide-bond counts because their total glycine contents are equal.
Correct Answer: P initially contains two peptide bonds, Q contains none and R contains one; all can yield three free glycine molecules after complete hydrolysis.
Explanation: A linear tripeptide containing three amino acid residues has two peptide bonds. Therefore, triglycine P contains two peptide linkages. Q consists of three independent free glycine molecules. No peptide bond joins them, so its initial peptide-bond count is zero. R contains one glycylglycine molecule, which has one peptide bond, together with one free glycine molecule. Consequently, R initially contains one peptide bond. All three samples nevertheless contain three glycine-derived units in total. Complete peptide hydrolysis of P breaks its two peptide bonds and releases three glycine molecules. Complete hydrolysis of R breaks its one peptide bond and also produces three free glycine molecules. Q already contains three free glycine molecules and is therefore unchanged with respect to peptide connectivity. The final constituent compositions can consequently be identical. This does not imply that the starting molecular organisations were identical. The question distinguishes total residue composition, the number of covalent peptide connections and the outcome of complete hydrolysis.
515. Two ordinary glucose-containing disaccharides P and Q are examined.
P is maltose, containing two D-glucose units joined through an α-(1→4) glycosidic linkage.
Q is lactose, containing β-D-galactose joined to D-glucose through a β-(1→4) glycosidic linkage.
Each disaccharide retains one free anomeric hemiacetal centre.
A reagent selectively converts free anomeric hemiacetal centres into stable glycosides without hydrolysing existing inter-residue linkages.
Both modified products are then subjected to complete acid hydrolysis, which regenerates the original free constituent monosaccharides.
Which statement correctly describes their behaviour?
ⓐ. Both become permanently glucose-only disaccharides because anomeric blocking changes galactose into glucose.
ⓑ. Blocking the free anomeric centres can remove reducing behaviour; hydrolysis yields glucose from P and glucose plus galactose from Q.
ⓒ. P becomes non-reducing, but Q remains reducing because the galactose residue is a ketose.
ⓓ. Neither can be blocked because their reducing ends are already involved in the original glycosidic linkages.
Correct Answer: Blocking the free anomeric centres can remove reducing behaviour; hydrolysis yields glucose from P and glucose plus galactose from Q.
Explanation: Maltose and lactose are both reducing disaccharides under ordinary conditions. Each contains one free anomeric hemiacetal centre capable of participating in ring–chain interconversion. The specified reagent converts these centres into stable glycosidic forms. Therefore, the ordinary reducing functionality can be blocked in both disaccharides. This modification does not alter the identity of the constituent monosaccharides. Maltose consists of two glucose units connected through an α-(1→4) glycosidic linkage. Its complete hydrolysis produces two glucose molecules. Lactose instead contains galactose and glucose connected through a β-(1→4) glycosidic linkage. Its complete hydrolysis produces one galactose and one glucose molecule. The final acid hydrolysis is explicitly stated to regenerate the original free monosaccharides. Therefore, the initial anomeric blocking does not prevent identification of the constituent sugar types after complete hydrolysis. Galactose is an aldose, not a ketose. The comparison requires distinguishing reducing-end availability from glycosidic linkage configuration and constituent monosaccharide identity.
516. A protein contains three cysteine residues at positions 5, 12 and 19 of a single polypeptide chain.
The native protein contains exactly one intrachain disulphide linkage, joining the cysteine residues at positions 5 and 19.
The cysteine residue at position 12 retains a free thiol group.
Treatment I selectively converts every free thiol group into a stable derivative without breaking any disulphide linkage.
Treatment II subsequently reduces the existing disulphide linkage, but does not reverse the derivative formed during Treatment I.
No peptide bond is cleaved.
Which statement correctly describes the available thiol groups after Treatment II?
ⓐ. All three cysteine residues possess free thiol groups because disulphide reduction reverses every earlier side-chain reaction.
ⓑ. Only the cysteine at position 12 possesses a free thiol group because the disulphide linkage remains intact.
ⓒ. The cysteine residues at positions 5 and 19 possess free thiol groups, while the position-12 thiol remains blocked.
ⓓ. None possesses a free thiol group because reduction removes sulphur from every cysteine residue.
Correct Answer: The cysteine residues at positions 5 and 19 possess free thiol groups, while the position-12 thiol remains blocked.
Explanation: Cysteine contains a thiol group in its side chain. Two cysteine thiol groups can be oxidised to form a disulphide linkage. In the native protein, the cysteines at positions 5 and 19 participate in such a bond. Their sulphur atoms are therefore not present as free thiol groups. The cysteine at position 12 remains unlinked and possesses one free –SH group initially. Treatment I selectively modifies this free thiol. It does not disturb the existing disulphide bond, so the position-5 and position-19 cysteines remain connected at that stage. Treatment II subsequently reduces the disulphide linkage. Reduction regenerates the thiol functionalities on the cysteines at positions 5 and 19. However, the problem states that the derivative at position 12 is not reversed. Therefore, the position-12 thiol remains blocked. No peptide-bond cleavage occurs, so the amino acid sequence is preserved. The question distinguishes thiol protection from disulphide reduction and illustrates why the order of selective reactions matters.
517. Three different proteins P, Q and R are compared.
P consists of one long polypeptide chain arranged into a compact native globular structure.
Q consists of two folded polypeptide chains associated non-covalently.
R consists of four folded polypeptide chains associated into a functional assembly.
All three contain alpha-helical and beta-pleated-sheet regions, and all are assumed to possess native biological activity.
Which statement is correct?
ⓐ. All three necessarily possess quaternary structure because each contains secondary-structure elements.
ⓑ. P can have primary, secondary and tertiary structure without quaternary structure; Q and R additionally possess quaternary organisation.
ⓒ. Only R possesses primary structure because it contains more than two polypeptide chains.
ⓓ. Q and R lack tertiary structure because quaternary association replaces intrachain folding.
Correct Answer: P can have primary, secondary and tertiary structure without quaternary structure; Q and R additionally possess quaternary organisation.
Explanation: Primary structure describes the amino acid sequence of an individual polypeptide chain. Secondary structure includes regular arrangements such as alpha-helices and beta-pleated sheets. Tertiary structure concerns the overall folding of a polypeptide chain into its three-dimensional conformation. A protein containing only one polypeptide chain can exhibit all three levels. P therefore does not require quaternary structure merely because its single chain is folded. Quaternary structure refers to the association and relative arrangement of two or more polypeptide subunits. Q contains two associated chains and consequently possesses quaternary organisation. R contains four associated chains and likewise possesses quaternary organisation. The presence of quaternary structure does not eliminate the primary, secondary or tertiary structures of the individual subunits. Each folded subunit retains its own amino acid sequence and internal structural features. The correct classification therefore depends on the number and arrangement of separate polypeptide chains rather than simply on molecular size or the presence of alpha-helices.
518. A researcher examines two hypothetical pathways for hydrolysis of a disaccharide.
The vertical axis represents potential energy, and the horizontal axis represents reaction progress.
Both pathways begin at the same reactant energy and end at a product energy 18 kJ mol⁻¹ below the reactant level.
Pathway P has a transition-state maximum 54 kJ mol⁻¹ above the reactants.
Pathway Q, catalysed by an enzyme, has a transition-state maximum 30 kJ mol⁻¹ above the reactants.
The final chemical products are identical in both pathways.
Which statement correctly compares the forward activation energies and the overall energy change?
ⓐ. The enzyme lowers the forward activation energy by \(24\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change remains \(-18\ \mathrm{kJ\,mol^{-1}}\).
ⓑ. The enzyme makes the reaction energy change \(+6\ \mathrm{kJ\,mol^{-1}}\) because the activation-energy difference must be added to the products.
ⓒ. The enzyme lowers the activation energy by \(18\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change becomes \(-24\ \mathrm{kJ\,mol^{-1}}\).
ⓓ. The enzyme makes the product energy equal to the reactant energy because catalysts cannot act on exothermic reactions.
Correct Answer: The enzyme lowers the forward activation energy by \(24\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change remains \(-18\ \mathrm{kJ\,mol^{-1}}\).
Explanation: \(\textbf{Forward activation energy of P:}\)
The transition-state maximum lies \(54\ \mathrm{kJ\,mol^{-1}}\) above the reactants.
\[
E_{a,P}=54\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Forward activation energy of Q:}\)
The enzyme-catalysed pathway has its maximum \(30\ \mathrm{kJ\,mol^{-1}}\) above the reactants.
\[
E_{a,Q}=30\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Reduction in activation energy:}\)
\[
\Delta E_a=E_{a,P}-E_{a,Q}
\]
Substituting:
\[
\Delta E_a=54-30
\]
\[
\Delta E_a=24\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Overall reaction energy change:}\)
Both pathways have identical reactant and product energy levels.
The product energy is stated to be \(18\ \mathrm{kJ\,mol^{-1}}\) lower than the reactant energy.
Therefore:
\[
\Delta E=E_{\mathrm{products}}-E_{\mathrm{reactants}}
\]
\[
\Delta E=-18\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Chemical interpretation:}\)
An enzyme provides a pathway with a lower activation-energy barrier.
It does not change the identity or energy levels of the initial and final chemical states under the same conditions.
Consequently, the reaction remains exothermic by the same stated energy difference.
The catalytic change in activation energy must not be confused with the overall energy change of reaction.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta E_a=24\ \mathrm{kJ\,mol^{-1}};\qquad\Delta E=-18\ \mathrm{kJ\,mol^{-1}}}
\]
519. An ordinary DNA fragment is represented by the sequence of one strand:
The sequence is 5′-ATGCCGTA-3′.
Its complementary strand is antiparallel.
A selective modification converts the adenine at position 1 of the displayed strand into guanine.
To restore ordinary complementary pairing at that position, the corresponding base of the opposite strand is also changed appropriately.
All other positions remain unchanged.
Which conclusion correctly describes the changed pair and its effect on the total number of interstrand hydrogen bonds?
ⓐ. The original A–T pair becomes G–C, increasing the total hydrogen-bond count by one.
ⓑ. The original A–T pair becomes G–C, decreasing the hydrogen-bond count by one.
ⓒ. The original G–C pair becomes A–T, increasing the hydrogen-bond count by one.
ⓓ. The original A–T pair becomes G–U, leaving the hydrogen-bond count unchanged.
Correct Answer: The original A–T pair becomes G–C, increasing the total hydrogen-bond count by one.
Explanation: Ordinary DNA contains adenine, guanine, cytosine and thymine as its principal nitrogenous bases. Adenine pairs with thymine through two hydrogen bonds, whereas guanine pairs with cytosine through three. The displayed strand begins with adenine at position 1. Its original complementary partner at that position must therefore be thymine. The specified modification changes adenine into guanine. To restore ordinary complementarity, the opposite base must be changed from thymine to cytosine. Thus, the original A–T pair becomes a G–C pair. This replacement changes the local number of hydrogen bonds from two to three. The total number of interstrand hydrogen bonds therefore increases by one. No other base pair changes, so no additional contribution must be considered. Uracil is characteristic of RNA rather than ordinary DNA and is not produced by the stipulated complementary replacement. The inference combines base identity, complementarity and the difference between the hydrogen-bond counts of the two standard DNA base pairs.
520. A carbohydrate fraction contains an unknown reducing disaccharide P.
Complete hydrolysis of P produces equal molar amounts of D-glucose and D-galactose.
Structural analysis establishes that the anomeric centre of the galactose residue is involved in the glycosidic linkage, while the glucose anomeric centre remains free.
The glycosidic linkage is β-(1→4).
A student argues that the observed reducing behaviour must arise from the galactose unit because galactose forms the glycosidic bond.
Which identification and explanation are correct?
ⓐ. P is sucrose, and the galactose anomeric centre is its reducing end.
ⓑ. P is maltose, and both glucose residues possess free anomeric centres.
ⓒ. P is lactose; its glucose unit has the free anomeric centre responsible for reducing behaviour.
ⓓ. P is cellulose, and its reducing character arises from every beta linkage.
Correct Answer: P is lactose; its glucose unit has the free anomeric centre responsible for reducing behaviour.
Explanation: Lactose is a disaccharide composed of D-galactose and D-glucose. NCERT describes its glycosidic linkage as β-(1→4). This means that the anomeric C1 of the galactose unit is connected to C4 of the glucose unit. The galactose anomeric centre is therefore involved in the glycosidic bond and is not available as a free hemiacetal group. However, the glucose residue retains a free anomeric centre. This centre can participate in ring–chain interconversion and give access to the corresponding carbonyl-containing form. Consequently, lactose behaves as a reducing sugar. The student's explanation incorrectly assigns the reducing behaviour to the glycosidically blocked galactose centre. Sucrose contains glucose and fructose, not glucose and galactose. Maltose contains two glucose units linked through an α-(1→4) bond. Cellulose is a glucose polysaccharide rather than the specified disaccharide. The correct identification requires combining monosaccharide composition, glycosidic configuration and the location of the free anomeric centre.
521. A laboratory compares four vitamins using the following observations:
| Vitamin | Relevant NCERT information |
| P | Deficiency may cause beri-beri. |
| Q | Deficiency may cause pernicious anaemia. |
| R | Deficiency may cause scurvy. |
| S | Deficiency may cause increased blood clotting time. |
A student identifies the vitamins correctly but concludes that every water-soluble vitamin in the table must necessarily be incapable of storage in the body.
Which statement correctly combines the vitamin identities and the limitation of that conclusion?
ⓐ. P—B₂, Q—B₆, R—C, S—E; the conclusion is valid without exception.
ⓑ. P—B₁₂, Q—B₁, R—A, S—C; the conclusion is valid because storage depends only on deficiency symptoms.
ⓒ. P—B₁, Q—B₂, R—D, S—K; the conclusion is invalid because all four vitamins are fat-soluble.
ⓓ. P—B₁, Q—B₁₂, R—C, S—K; B₁₂ is an exception to the usual water-soluble vitamin storage rule.
Correct Answer: P—B₁, Q—B₁₂, R—C, S—K; B₁₂ is an exception to the usual water-soluble vitamin storage rule.
Explanation: Vitamin B₁ is thiamine, whose deficiency is associated with beri-beri. Therefore, P corresponds to B₁. Vitamin B₁₂ deficiency is associated with pernicious anaemia in the NCERT table, identifying Q. Vitamin C deficiency produces scurvy, so R corresponds to vitamin C. Vitamin K is important for normal blood clotting, and its deficiency increases blood clotting time. Therefore, S corresponds to vitamin K. Vitamins B₁, B₁₂ and C belong to the water-soluble group. Vitamin K belongs to the fat-soluble group. NCERT explains that water-soluble vitamins are generally readily excreted and ordinarily require regular dietary supply. However, vitamin B₁₂ is specifically identified as an exception to the general absence of storage in this group. Consequently, the student's absolute conclusion is incorrect even though the vitamin identifications may be correct. This qualification must be retained without changing B₁₂'s water-soluble classification. The question demonstrates why general biological classifications should be applied together with their stated exceptions.
522. A protein contains three polypeptide subunits associated non-covalently in its functional native form.
Treatment I separates the subunits without breaking peptide bonds or disturbing the folded conformation of each subunit.
Treatment II, applied to the separated subunits, disrupts hydrogen bonds supporting their alpha-helical regions.
Treatment III subsequently hydrolyses every peptide bond, producing free amino acids.
The amino acid identities remain unchanged throughout the procedures.
Which sequence of structural consequences is most appropriate?
ⓐ. Treatment I destroys primary structure, Treatment II destroys quaternary structure, and Treatment III changes only secondary structure.
ⓑ. I removes quaternary structure, II changes the primary sequence, and III breaks only side-chain hydrogen bonds.
ⓒ. All three treatments are equivalent because every disruption of a protein structure necessarily hydrolyses peptide bonds.
ⓓ. Treatment I disrupts quaternary association, Treatment II can disturb secondary structure, and Treatment III destroys the original peptide connectivity.
Correct Answer: Treatment I disrupts quaternary association, Treatment II can disturb secondary structure, and Treatment III destroys the original peptide connectivity.
Explanation: A functional protein containing three associated polypeptide subunits possesses quaternary organisation. This level of structure concerns the spatial arrangement of separate chains. Treatment I separates those chains through disruption of their non-covalent association. Since peptide bonds and intrachain folds remain intact, the treatment primarily affects the original quaternary assembly. Alpha-helices are regular secondary structures stabilised by backbone hydrogen bonding. Treatment II disrupts these hydrogen bonds within the separated chains. Therefore, the alpha-helical regions can lose their regular secondary organisation without immediate peptide-bond hydrolysis. Treatment III is chemically different because it directly hydrolyses the covalent peptide backbone. Complete hydrolysis produces the constituent amino acids and removes the original sequence connectivity. The identities of the liberated amino acids may remain unchanged even though their ordered arrangement has been lost. Thus, the treatments affect progressively different aspects of molecular organisation. The correct comparison distinguishes association of subunits, internal folding and covalent residue connectivity.
523. Three purified substances are subjected to selective hydrolysis.
P is an ordinary glucose oligosaccharide whose units are joined through glycosidic linkages.
Q is an ordinary linear polypeptide whose alpha-amino acid residues are joined through peptide linkages.
R is an ordinary linear RNA chain whose ribonucleotide units are joined through phosphodiester linkages.
Treatment I hydrolyses only glycosidic linkages between monosaccharide residues.
Treatment II hydrolyses only peptide bonds.
Treatment III hydrolyses only internucleotide phosphodiester bonds.
All three reactions preserve the chemical identities of the corresponding constituent units.
Consider the following statements.
Statement I: Treatment I can fragment P without necessarily fragmenting Q or R.
Statement II: Treatment II can release amino acid units from Q without converting its residues into ribonucleotides.
Statement III: Treatment III can interrupt R's polynucleotide connectivity without necessarily cleaving the bonds connecting its bases to their sugars.
Statement IV: All three polymers must yield identical constituent molecules because they are biologically important.
Statement V: The identity of the hydrolysate depends on the original constituent units as well as on the covalent linkages cleaved.
Which statements are correct?
ⓐ. I, II, III and V only
ⓑ. I, III and IV only
ⓒ. II, IV and V only
ⓓ. I, II, III and IV only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because P contains monosaccharide residues connected through glycosidic linkages. A reagent selective for these connections can fragment the oligosaccharide while leaving unrelated covalent linkage classes unchanged. Statement II is correct because Q is a polypeptide composed of alpha-amino acid residues joined through peptide bonds. Hydrolysis of these bonds can release amino acid-derived products without changing their chemical identities into nucleotides. Statement III is correct because R contains a phosphodiester backbone connecting ribonucleotide units. Hydrolysis of the internucleotide phosphodiester bonds can fragment that backbone while preserving the separate base–sugar linkages under the stated selectivity. Statement IV is incorrect because biological importance does not establish identical constituent units or chemical structures. Carbohydrates, proteins and nucleic acids possess different characteristic monomers and linkages. Statement V is correct because the products of hydrolysis depend on both the original structural units and the particular bonds that are broken. The same broad description of hydrolysis therefore does not make all biomolecular degradation processes chemically identical. The three treatments illustrate how bond-specific reactions can reveal differences among the major biomolecular classes while preserving the identities of their constituent components.
524. A purified starch sample has a dry mass of \(250\ \mathrm{g}\).
According to the NCERT description, amylose constitutes approximately 15–20% of ordinary starch, while amylopectin constitutes approximately 80–85%.
Assume that the sample contains only these two components and that the percentages are by mass.
Amylose consists of essentially unbranched α-(1→4)-linked glucose chains.
Amylopectin contains α-(1→4)-linked segments with α-(1→6) branch-forming linkages.
A reagent is available that selectively hydrolyses α-(1→6) linkages without acting on α-(1→4) linkages.
Which statement correctly combines the possible component masses with the reagent's direct chemical action?
ⓐ. Amylose: \(37.5\text{–}50.0\ \mathrm{g}\); amylopectin: \(200.0\text{–}212.5\ \mathrm{g}\); the reagent selectively targets branch-forming linkages in amylopectin.
ⓑ. Amylose: \(37.5\text{–}50.0\ \mathrm{g}\); amylopectin: \(200.0\text{–}212.5\ \mathrm{g}\); the reagent selectively cleaves the unbranched amylose backbone.
ⓒ. Amylose: \(200.0\text{–}212.5\ \mathrm{g}\); amylopectin: \(37.5\text{–}50.0\ \mathrm{g}\); the reagent selectively targets amylopectin branches.
ⓓ. Amylose: \(50.0\text{–}62.5\ \mathrm{g}\); amylopectin: \(187.5\text{–}200.0\ \mathrm{g}\); the reagent hydrolyses both components completely.
Correct Answer: Amylose: \(37.5\text{–}50.0\ \mathrm{g}\); amylopectin: \(200.0\text{–}212.5\ \mathrm{g}\); the reagent selectively targets branch-forming linkages in amylopectin.
Explanation: \(\textbf{Mass range of amylose:}\)
NCERT describes amylose as the smaller, essentially unbranched component of starch.
Its stated mass fraction is approximately 15–20%.
\[
m_{\mathrm{amylose,min}}=250\left(\frac{15}{100}\right)
\]
\[
m_{\mathrm{amylose,min}}=37.5\ \mathrm{g}
\]
\[
m_{\mathrm{amylose,max}}=250\left(\frac{20}{100}\right)
\]
\[
m_{\mathrm{amylose,max}}=50.0\ \mathrm{g}
\]
\(\textbf{Mass range of amylopectin:}\)
Amylopectin accounts for approximately 80–85% of starch.
\[
m_{\mathrm{amylopectin,min}}=250\left(\frac{80}{100}\right)
\]
\[
m_{\mathrm{amylopectin,min}}=200.0\ \mathrm{g}
\]
\[
m_{\mathrm{amylopectin,max}}=250\left(\frac{85}{100}\right)
\]
\[
m_{\mathrm{amylopectin,max}}=212.5\ \mathrm{g}
\]
\(\textbf{Linkage-selectivity decision:}\)
Amylose contains the specified α-(1→4) backbone linkages but lacks the α-(1→6) branch-forming connections characteristic of amylopectin.
The reagent therefore has its specified targets in amylopectin rather than in amylose.
Selective branch-linkage hydrolysis does not imply complete hydrolysis of every glucose–glucose linkage in amylopectin.
\(\textbf{Component-mass check:}\)
At the lower amylose limit:
\[
37.5+212.5=250.0\ \mathrm{g}
\]
At the upper amylose limit:
\[
50.0+200.0=250.0\ \mathrm{g}
\]
The component ranges are therefore complementary rather than independently adjustable.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
m_{\mathrm{amylose}}=37.5\text{–}50.0\ \mathrm{g}\\
m_{\mathrm{amylopectin}}=200.0\text{–}212.5\ \mathrm{g}\\
\text{Selective cleavage: amylopectin }\alpha(1\rightarrow6)\text{ linkages}
\end{gathered}}
\]
525. Four biological preparations are obtained from different natural sources.
| Preparation | Source and principal observation |
| P | A carbohydrate-rich fraction extracted from plant storage tissues |
| Q | A carbohydrate reserve isolated from animal liver |
| R | A structural carbohydrate isolated from cotton fibres |
| S | A carbohydrate reserve obtained from yeast cells |
A student proposes that P and R must have the same biological function because both originate from plants, while Q and S cannot contain the same reserve polysaccharide because their sources belong to different groups of organisms.
Which conclusion is most consistent with NCERT?
ⓐ. P and R must both be glycogen, while Q and S must both be cellulose.
ⓑ. P is consistent with starch, Q and S with glycogen, and R with cellulose; biological function cannot be inferred merely from whether the source is plant or animal.
ⓒ. P and S must be cellulose because all carbohydrates produced by plants or fungi function primarily as structural materials.
ⓓ. Q is consistent with starch and R with glycogen because storage carbohydrates always contain β-(1→4) glucose linkages.
Correct Answer: P is consistent with starch, Q and S with glycogen, and R with cellulose; biological function cannot be inferred merely from whether the source is plant or animal.
Explanation: Starch is the principal storage polysaccharide of plants. Its occurrence in plant storage tissues makes P consistent with starch. Glycogen is the principal carbohydrate reserve of animals and is found in tissues including the liver and muscles. Therefore, Q is consistent with glycogen. Cellulose is an important structural polysaccharide of plants and is a major component of cotton fibres. Consequently, R is consistent with cellulose. NCERT also states that glycogen is found in yeast and fungi. The carbohydrate reserve in S can therefore be glycogen despite the organism not being an animal. The student's first deduction overlooks the distinction between storage and structural functions within plants. The second deduction incorrectly assumes that a particular reserve polysaccharide must be confined to only one broad group of organisms. Starch and glycogen contain α-linked glucose residues, whereas cellulose contains β-(1→4)-linked glucose residues. These chemical differences are related to their structural organisation and biological roles. The correct interpretation combines natural source, function and glycosidic constitution instead of relying on source classification alone.
526. Glucose and sucrose are soluble in water, whereas cyclohexane and benzene have very limited solubility in water.
All four compounds contain carbon and hydrogen.
Glucose commonly exists in cyclic forms in aqueous solution.
Cyclohexane also contains a six-membered ring.
Sucrose has a substantially larger molecular mass than cyclohexane and contains numerous oxygen-containing functional groups.
A student argues that ring size and molecular mass are the principal reasons why glucose and sucrose dissolve in water.
Which explanation best accounts for the observed solubility behaviour?
ⓐ. Glucose and cyclohexane should have identical aqueous solubilities because each can possess a six-membered ring.
ⓑ. Sucrose should be less soluble than benzene because every increase in molecular mass necessarily decreases water solubility.
ⓒ. The multiple hydroxyl groups of glucose and sucrose permit extensive hydrogen bonding with water, whereas cyclohexane and benzene lack comparable polar functional groups.
ⓓ. The cyclic structures of glucose and sucrose are permanently ionic, whereas cyclohexane and benzene contain no covalent bonds.
Correct Answer: The multiple hydroxyl groups of glucose and sucrose permit extensive hydrogen bonding with water, whereas cyclohexane and benzene lack comparable polar functional groups.
Explanation: Water is a polar solvent capable of forming hydrogen bonds with suitable polar functional groups. Glucose possesses several hydroxyl groups that can interact favourably with water molecules. Sucrose also contains numerous hydroxyl groups distributed over its two monosaccharide-derived portions. These groups provide multiple opportunities for hydrogen bonding with the solvent. Cyclohexane, by contrast, contains essentially nonpolar carbon–carbon and carbon–hydrogen bonds. Benzene is also a predominantly nonpolar hydrocarbon and does not possess the hydroxyl groups characteristic of the two sugars. Consequently, neither hydrocarbon can interact with water in the same extensive hydrogen-bonding manner. The presence of a six-membered ring in both cyclohexane and glucopyranose does not establish comparable solubility. Ring size describes one structural feature but does not determine the polarity of the functional groups attached to that ring. Molecular mass alone is likewise insufficient to predict the observed difference. The correct explanation connects the chemical constitution of the sugars with their ability to form favourable intermolecular interactions in water.
527. Two reactions involving D-glucose are compared.
Reaction P converts one open-chain D-glucose molecule into its cyclic glucopyranose hemiacetal through intramolecular addition of the C5 hydroxyl group to the C1 aldehydic group.
Reaction Q joins two D-glucose molecules through one ordinary glycosidic condensation to form maltose, eliminating one water molecule.
No other reaction occurs.
Take the molar mass of glucose as \(180\ \mathrm{g\,mol^{-1}}\) and water as \(18\ \mathrm{g\,mol^{-1}}\).
Which comparison correctly gives the molar masses and explains the different mass consequences?
ⓐ. P produces a cyclic molecule of molar mass \(162\ \mathrm{g\,mol^{-1}}\), while Q produces maltose of molar mass \(360\ \mathrm{g\,mol^{-1}}\).
ⓑ. P produces a cyclic molecule of molar mass \(180\ \mathrm{g\,mol^{-1}}\), while Q produces maltose of molar mass \(342\ \mathrm{g\,mol^{-1}}\); only Q eliminates water.
ⓒ. Both P and Q eliminate one water molecule, giving products of molar masses \(162\) and \(342\ \mathrm{g\,mol^{-1}}\), respectively.
ⓓ. P produces a cyclic molecule of molar mass \(180\ \mathrm{g\,mol^{-1}}\), while Q produces maltose of molar mass \(360\ \mathrm{g\,mol^{-1}}\); neither reaction eliminates water.
Correct Answer: P produces a cyclic molecule of molar mass \(180\ \mathrm{g\,mol^{-1}}\), while Q produces maltose of molar mass \(342\ \mathrm{g\,mol^{-1}}\); only Q eliminates water.
Explanation: \(\textbf{Intramolecular ring formation:}\)
Open-chain glucose contains an aldehydic group at C1 and a hydroxyl group at C5.
The C5 hydroxyl oxygen adds intramolecularly to the aldehydic carbon.
This produces the cyclic hemiacetal structure of glucopyranose.
No separate molecule of water is eliminated during the stated hemiacetal formation.
Therefore:
\[
M_{\mathrm{glucopyranose}}=M_{\mathrm{glucose}}
\]
\[
M_{\mathrm{glucopyranose}}=180\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Intermolecular glycosidic condensation:}\)
Maltose contains two glucose-derived residues connected by one glycosidic linkage.
Its formation from two free glucose molecules eliminates one water molecule.
\[
\mathrm{2C_6H_{12}O_6\rightarrow C_{12}H_{22}O_{11}+H_2O}
\]
\(\textbf{Molar mass of maltose:}\)
\[
M_{\mathrm{maltose}}=2M_{\mathrm{glucose}}-M_{\mathrm{water}}
\]
\[
M_{\mathrm{maltose}}=2(180)-18
\]
\[
M_{\mathrm{maltose}}=360-18
\]
\[
M_{\mathrm{maltose}}=342\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Formula verification:}\)
Cyclic glucose retains the formula \(\mathrm{C_6H_{12}O_6}\).
Maltose has the formula \(\mathrm{C_{12}H_{22}O_{11}}\).
The difference follows from the presence or absence of a condensation step rather than from whether a ring occurs in the product.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
M_{\mathrm{glucopyranose}}=180\ \mathrm{g\,mol^{-1}}\\
M_{\mathrm{maltose}}=342\ \mathrm{g\,mol^{-1}}
\end{gathered}}
\]
528. A sample of D-glucose is subjected to two successive oxidation stages.
Stage I uses bromine water under suitable mild conditions to oxidise the open-chain aldehydic group into a carboxyl group.
Stage II uses a sufficiently strong oxidising agent to convert the terminal primary alcoholic group of the Stage-I product into another carboxyl group.
The six-carbon skeleton remains intact, and no other functional groups are oxidised.
Take atomic masses \(C=12\), \(H=1\) and \(O=16\).
Which option correctly identifies the successive products and their molar masses?
ⓐ. Stage I: gluconic acid, \(196\ \mathrm{g\,mol^{-1}}\); Stage II: saccharic acid, \(210\ \mathrm{g\,mol^{-1}}\)
ⓑ. Stage I: saccharic acid, \(210\ \mathrm{g\,mol^{-1}}\); Stage II: gluconic acid, \(196\ \mathrm{g\,mol^{-1}}\)
ⓒ. Stage I: gluconic acid, \(194\ \mathrm{g\,mol^{-1}}\); Stage II: saccharic acid, \(212\ \mathrm{g\,mol^{-1}}\)
ⓓ. Stage I: fructose, \(180\ \mathrm{g\,mol^{-1}}\); Stage II: saccharic acid, \(210\ \mathrm{g\,mol^{-1}}\)
Correct Answer: Stage I: gluconic acid, \(196\ \mathrm{g\,mol^{-1}}\); Stage II: saccharic acid, \(210\ \mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Stage I: Oxidation of the aldehydic group:}\)
The open-chain form of glucose contains an aldehydic group at C1.
Bromine water oxidises this group into a carboxylic acid group under suitable mild conditions.
The product is gluconic acid.
\[
\mathrm{C_6H_{12}O_6+[O]\rightarrow C_6H_{12}O_7}
\]
\(\textbf{Molar mass of gluconic acid:}\)
\[
M_{\mathrm{gluconic}}=6(12)+12(1)+7(16)
\]
\[
M_{\mathrm{gluconic}}=72+12+112
\]
\[
M_{\mathrm{gluconic}}=196\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Stage II: Oxidation of the terminal primary alcohol:}\)
Gluconic acid retains the original C6 primary alcoholic group.
Oxidation of that group into another carboxylic acid produces saccharic acid, also called glucaric acid.
The product consequently contains carboxyl groups at both ends of the original carbon chain.
\[
\mathrm{C_6H_{12}O_7+2[O]\rightarrow C_6H_{10}O_8+H_2O}
\]
\(\textbf{Molar mass of saccharic acid:}\)
\[
M_{\mathrm{saccharic}}=6(12)+10(1)+8(16)
\]
\[
M_{\mathrm{saccharic}}=72+10+128
\]
\[
M_{\mathrm{saccharic}}=210\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Chemical consistency:}\)
The first oxidation changes the aldehydic group while preserving the primary alcohol.
The second oxidation changes the remaining terminal primary alcohol.
Both stages preserve the six-carbon skeleton, but the final product contains two carboxyl groups rather than one.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
\mathrm{Stage\ I:\ gluconic\ acid},\ 196\ \mathrm{g\,mol^{-1}}\\
\mathrm{Stage\ II:\ saccharic\ acid},\ 210\ \mathrm{g\,mol^{-1}}
\end{gathered}}
\]
529. Two ribose-containing compounds P and Q are examined for their ability to access an open-chain aldehydic form.
P is ordinary free D-ribose, an aldopentose whose cyclic form contains a free anomeric hemiacetal centre.
Q is uridine, in which the anomeric C1′ of ribose is attached to uracil through a stable base–sugar glycosidic linkage.
A reagent selectively detects an available aldehydic form under conditions that do not hydrolyse the base–sugar linkage of Q.
In a separate experiment, complete hydrolysis of that linkage regenerates free ribose and uracil.
Which statement correctly predicts the outcomes?
ⓐ. Both P and Q initially behave identically because the ribose carbon skeleton is present in each compound.
ⓑ. Q possesses a free ribose aldehyde at C1′ because attachment of uracil creates an additional hemiacetal hydroxyl group.
ⓒ. P can open to an aldehyde, while Q's base–sugar linkage blocks ring opening until hydrolysis releases ribose.
ⓓ. Neither can access an aldehydic form because all aldopentoses exist exclusively as permanently closed rings.
Correct Answer: P can open to an aldehyde, while Q's base–sugar linkage blocks ring opening until hydrolysis releases ribose.
Explanation: Ribose is an aldopentose containing five carbon atoms and an aldehydic group in its open-chain structure. Its ordinary cyclic form contains a free anomeric hemiacetal centre. This centre can participate in ring–chain interconversion under suitable conditions. Consequently, P can access an aldehydic form recognised by the stated reagent. Uridine is chemically different because it is a nucleoside consisting of uracil attached to ribose. The base is joined through the ribose anomeric C1′ position. This position is therefore involved in a stable base–sugar glycosidic linkage rather than being present as a free hemiacetal. Under the specified conditions, Q cannot undergo the corresponding ordinary anomeric ring opening without cleavage of that linkage. The presence of ribose-derived carbon atoms does not establish identical reactivity in free ribose and its nucleoside derivative. Complete hydrolysis of the base–sugar linkage can regenerate free ribose and uracil. The liberated ribose can then display its characteristic ring–chain behaviour. The comparison connects carbohydrate chemistry with the chemical constitution of nucleosides.
530. Two food-derived preparations P and Q contain different substances associated with normal biological functioning.
P is a mixture of vitamins obtained from suitable dietary sources.
Q contains a protein enzyme that catalyses a specific biochemical reaction.
A student makes the following deductions:
Statement I: Every vitamin in P must contain an amino group because the historical name was “vitamine”.
Statement II: Q may catalyse a reaction repeatedly without being consumed in a fixed stoichiometric amount.
Statement III: The fact that vitamins are required in small quantities means that excessive intake can never be harmful.
Statement IV: P and Q may contain chemically different classes of substances while both remaining biologically important.
Statement V: The biological importance of P and Q does not establish that every constituent is a macromolecular polymer.
Which statements are correct?
ⓐ. I, II and IV only
ⓑ. II, IV and V only
ⓒ. I, III and V only
ⓓ. II, III, IV and V only
Correct Answer: II, IV and V only
Explanation: Statement I is incorrect because the historical term vitamine arose from an early belief that such essential substances contained amino groups. Subsequent discoveries showed that vitamins do not all possess this functionality. Statement II is correct because enzymes are biological catalysts. They accelerate particular reactions and are not normally consumed as stoichiometric reactants in the overall transformation. Statement III is incorrect because NCERT explicitly cautions that excessive vitamin intake may be harmful. A small physiological requirement does not imply unlimited safety at higher intake. Statement IV is correct because vitamins belong to chemically diverse classes, while protein enzymes possess amino acid-based polypeptide structures. Both can nevertheless perform important biological functions. Statement V is also correct because biological importance is not equivalent to macromolecular size. Many vitamins are relatively small organic molecules rather than repeating-unit polymers. Protein enzymes may be large polypeptides, but this structural feature is not a universal requirement for every biomolecule. The correct combination distinguishes historical naming, catalytic action, nutritional quantity, chemical constitution and biological significance.
531. A biochemical experiment uses two protein enzymes, E₁ and E₂, and three purified disaccharides.
| Disaccharide | Constituent monosaccharides after complete hydrolysis |
| P | Glucose + fructose |
| Q | Glucose + glucose |
| R | Glucose + galactose |
E₁ hydrolyses P completely but does not hydrolyse Q or R.
E₂ hydrolyses Q completely but does not hydrolyse P or R.
Both enzymes are active under the same suitable experimental conditions.
The enzymes are named according to the disaccharides on which they act.
Which identification is correct?
ⓐ. P is maltose, Q is sucrose, E₁ is maltase and E₂ is sucrase.
ⓑ. P is sucrose, Q is lactose, E₁ is sucrase and E₂ is lactase.
ⓒ. P is lactose, Q is maltose, E₁ is lactase and E₂ is maltase.
ⓓ. P is sucrose, Q is maltose, E₁ is sucrase and E₂ is maltase.
Correct Answer: P is sucrose, Q is maltose, E₁ is sucrase and E₂ is maltase.
Explanation: Sucrose consists of glucose and fructose units. Therefore, the hydrolysis products of P identify it as sucrose among the three specified ordinary disaccharides. Maltose consists of two glucose units, identifying Q. Lactose consists of glucose and galactose, identifying R. NCERT explains that enzyme names may be derived from the substrates on which they act. Sucrase catalyses hydrolysis of sucrose into glucose and fructose. Consequently, E₁ is consistent with sucrase. Maltase catalyses hydrolysis of maltose into two glucose molecules. Therefore, E₂ is consistent with maltase. The absence of detectable hydrolysis of the other disaccharides under the stated conditions illustrates the substrate specificity of the enzymes. It does not imply that those other disaccharides are incapable of hydrolysis by any method. Suitable acid treatment or a different enzyme can hydrolyse them. The correct identification requires connecting substrate composition, hydrolysis products, enzyme naming and the observed selectivity.
532. Three hormones P, Q and R are described by their chemical natures and biological roles.
| Hormone | Characteristic information |
| P | An amino acid-derived hormone associated with responses to external stimuli |
| Q | A polypeptide hormone involved in lowering elevated blood glucose concentration |
| R | An iodinated derivative of tyrosine associated with thyroid function |
A student argues that P and R must possess ordinary polypeptide backbones because they are chemically related to amino acids, while Q cannot be a protein-derived hormone because it participates in blood glucose regulation.
Which conclusion is correct?
ⓐ. P is epinephrine, Q is insulin and R is thyroxine; only insulin must have a polypeptide backbone.
ⓑ. P is insulin, Q is thyroxine and R is epinephrine; all three contain steroid frameworks.
ⓒ. P is glucagon, Q is testosterone and R is vitamin K; all three are amino acid-derived hormones.
ⓓ. P and R must be polypeptides because every molecule containing nitrogen is a polymer of amino acid residues.
Correct Answer: P is epinephrine, Q is insulin and R is thyroxine; only insulin must have a polypeptide backbone.
Explanation: NCERT identifies epinephrine and norepinephrine as amino acid-derived hormones involved in responses to external stimuli. Therefore, P is consistent with epinephrine. Insulin is a polypeptide hormone involved in regulating blood glucose concentration and lowering elevated levels. This identifies Q. Thyroxine is an iodinated derivative of tyrosine produced by the thyroid gland. Therefore, R corresponds to thyroxine. The student's interpretation confuses the chemical origin of a hormone with the presence of a polypeptide backbone. An amino acid-derived hormone need not contain multiple amino acid residues joined through peptide bonds. Epinephrine and thyroxine are not classified as ordinary polypeptide hormones merely because they originate from amino acid-related chemistry. Insulin, by contrast, possesses a polypeptide structure. Its role in blood glucose regulation is compatible with that chemical constitution. Hormones can belong to different structural classes while functioning as chemical messengers. The correct conclusion therefore requires independent recognition of chemical identity, structural classification and biological role.
533. A hypothetical ordinary linear tetrapeptide contains one glycine, one alanine, one serine and one valine residue.
All four residues occur exactly once.
Every sequence is written from its free amino terminus towards its free carboxyl terminus.
An analytical test establishes that glycine and valine occupy the two terminal positions, in an unknown order.
A second test shows that serine occurs immediately before alanine in the sequence.
No additional structural restriction is imposed.
Which option correctly gives the number of possible primary sequences and the sequences themselves?
ⓐ. Four sequences: Gly–Ser–Ala–Val, Gly–Ala–Ser–Val, Val–Ser–Ala–Gly and Val–Ala–Ser–Gly
ⓑ. Two sequences: Gly–Ser–Ala–Val and Val–Ser–Ala–Gly
ⓒ. Two sequences: Ser–Ala–Gly–Val and Ser–Ala–Val–Gly
ⓓ. One sequence: Gly–Ser–Ala–Val
Correct Answer: Two sequences: Gly–Ser–Ala–Val and Val–Ser–Ala–Gly
Explanation: The primary structure of a peptide is determined by the order of its amino acid residues. All four residues are different, so changes in their positions can produce different primary sequences. The first condition restricts glycine and valine to the two terminal positions. Since their order is unspecified, glycine can occupy the N-terminus with valine at the C-terminus, or the reverse arrangement can occur. Serine and alanine must occupy the two internal positions. The second condition requires serine to occur immediately before alanine when the sequence is read from the N-terminus. Therefore, the internal order must be Ser–Ala rather than Ala–Ser. With glycine at the N-terminus, the sequence is Gly–Ser–Ala–Val. With valine at the N-terminus, the sequence is Val–Ser–Ala–Gly. No further arrangement satisfies both restrictions. The two sequences have identical amino acid compositions and would release the same constituents upon complete hydrolysis. However, they possess different primary structures because their terminal residue identities and overall orders differ. This example illustrates how two independent sequence restrictions can establish the complete set of possible primary structures.
534. An ordinary protein contains two chains associated through non-covalent interactions.
Chain P contains one alpha-helical region stabilised primarily by hydrogen bonds within the chain.
Chain Q contains a beta-pleated region whose hydrogen bonds are formed between two extended segments of Q itself.
A selective treatment separates P from Q without disturbing either chain's internal hydrogen-bonding pattern or peptide backbone.
After separation, a second treatment unfolds the beta-pleated region of Q by disrupting its internal hydrogen bonds.
Which statement correctly identifies the structural consequences?
ⓐ. Separation necessarily destroys both secondary structures because every beta sheet and alpha-helix requires an interaction between distinct polypeptide chains.
ⓑ. The first treatment changes primary structure, while the second changes only the total number of amino acid residues.
ⓒ. The first treatment disrupts quaternary association but can preserve the stated intrachain secondary structures; the second can disturb Q's beta-pleated secondary structure without cleaving its peptide bonds.
ⓓ. The first treatment leaves quaternary structure unchanged because the two chains retain their amino acid compositions.
Correct Answer: The first treatment disrupts quaternary association but can preserve the stated intrachain secondary structures; the second can disturb Q's beta-pleated secondary structure without cleaving its peptide bonds.
Explanation: Quaternary structure concerns the arrangement and association of distinct polypeptide subunits. The starting protein possesses this level of organisation because chains P and Q are associated. The first treatment separates the chains by disrupting their interchain association. Therefore, the original quaternary organisation is lost. However, the question explicitly states that the internal hydrogen-bonding arrangements of the chains remain intact. The alpha-helical region of P can consequently retain its stated secondary structure. The beta-pleated region of Q can also survive because its supporting hydrogen bonds occur between segments of the same polypeptide chain. A beta-pleated sheet does not necessarily require association of two different protein molecules. The second treatment disrupts those internal backbone hydrogen bonds within Q. This can disturb the beta-pleated secondary structure without breaking peptide bonds. The original amino acid sequence therefore need not change. The distinction illustrates why the location of a hydrogen-bonding interaction matters when predicting which protein structural levels are affected by separation or unfolding.
535. A carbohydrate chemist examines three compounds P, Q and R.
| Compound | Structural information |
| P | Free cyclic D-glucose with an anomeric hemiacetal hydroxyl group |
| Q | Methyl D-glucoside with a stable anomeric acetal linkage |
| R | Glucose pentaacetate with its hydroxyl groups acetylated |
An aqueous solution of P undergoes ordinary mutarotation.
Q and R are examined under conditions that do not hydrolyse their protecting groups.
The researcher proposes that the three compounds must all undergo the same rapid anomeric interconversion because each contains the six-carbon skeleton of glucose.
Which conclusion is correct?
ⓐ. The proposal is correct because the presence of six carbon atoms guarantees a free hemiacetal group.
ⓑ. R must undergo mutarotation faster than P because converting hydroxyl groups into acetate esters creates an aldehyde group.
ⓒ. Q can undergo mutarotation, but P cannot because its anomeric centre is not permanently blocked.
ⓓ. P can mutarotate, whereas Q and R lack the free anomeric hemiacetal needed under the stated conditions.
Correct Answer: P can mutarotate, whereas Q and R lack the free anomeric hemiacetal needed under the stated conditions.
Explanation: Ordinary mutarotation of glucose involves interconversion of its alpha and beta anomers through the open-chain form. This process requires an available anomeric hemiacetal centre capable of ring opening. P possesses such a centre and can therefore undergo mutarotation in aqueous solution. Q is a methyl glucoside in which the anomeric hydroxyl group has been converted into a stable acetal linkage. Without hydrolysis of this linkage, Q cannot access the ordinary glucose ring–chain equilibrium. R is glucose pentaacetate, in which the hydroxyl groups, including the anomeric hydroxyl, have been acetylated. Under conditions that preserve the acetate groups, R also lacks the free hemiacetal group required for the corresponding mutarotation. The fact that all three compounds contain the same glucose-derived carbon skeleton does not establish identical functional-group availability. The anomeric position must be considered separately from the rest of the carbohydrate skeleton. Acetylation and glycoside formation are chemically different transformations, but both can block ordinary anomeric ring opening. The correct conclusion therefore follows from examining the functional state of C1 rather than merely counting carbon atoms.
536. Two independent vitamin-deficiency observations are recorded:
P involves a person whose diet has been deficient in suitable vitamin A sources and who develops difficulty seeing in dim light.
Q involves a person whose diet has been deficient in suitable vitamin C sources and who develops bleeding gums associated with scurvy.
The investigator proposes increasing intake of a single vitamin to address both characteristic deficiency associations, arguing that vitamins have interchangeable functions.
Which statement best evaluates the proposal?
ⓐ. It is valid because vitamins A and C belong to the same chemical class and possess identical biological functions.
ⓑ. The proposal is valid because correcting scurvy also restores the visual function affected by vitamin A deficiency.
ⓒ. The claim is unsupported: A and C differ in solubility and deficiency effects, while biological importance proves neither identity.
ⓓ. It is not supported only because vitamin A is water-soluble whereas vitamin C is fat-soluble.
Correct Answer: The claim is unsupported: A and C differ in solubility and deficiency effects, while biological importance proves neither identity.
Explanation: Vitamin A is a fat-soluble vitamin. NCERT associates its deficiency with night blindness and xerophthalmia. Therefore, the observation involving difficulty seeing in dim light is consistent with the characteristic vitamin A deficiency association. Vitamin C is a water-soluble vitamin. Its deficiency is associated with scurvy, including bleeding gums. The two observations consequently correspond to different vitamins with different biological roles. The fact that both substances are called vitamins does not imply identical chemical structures or functions. Vitamin C is not simply a hydrolysable precursor of vitamin A in the stated NCERT treatment. Their solubility classifications are also different: vitamin A belongs to the fat-soluble group, while vitamin C belongs to the water-soluble group. The investigator's proposal therefore rests on an incorrect assumption of nutritional interchangeability. The observations alone are not a substitute for establishing an individual's actual nutritional status, but they provide distinct textbook deficiency associations. The correct conclusion is that one vitamin cannot automatically replace the biological role of another merely because both are required in small quantities.
537. A purified protein enzyme undergoes two separate treatments under controlled experimental conditions.
Treatment I disrupts the interactions maintaining the enzyme's native three-dimensional conformation. Its catalytic activity is lost, but analysis confirms that the amino acid sequence and all peptide bonds remain intact.
Treatment II completely hydrolyses the enzyme's polypeptide chains into their constituent amino acids.
No new protein synthesis occurs during either treatment.
Which statement correctly distinguishes the molecular consequences of the two treatments?
ⓐ. Treatment I necessarily destroys the primary structure, whereas Treatment II affects only the tertiary structure.
ⓑ. Treatment I causes denaturation with preservation of primary structure, whereas Treatment II cleaves peptide linkages and destroys the original primary structure.
ⓒ. Both treatments preserve the original peptide-bond connectivity because loss of enzyme activity never involves covalent-bond cleavage.
ⓓ. Treatment I converts the protein into a nucleic acid, whereas Treatment II converts its amino acids into monosaccharides.
Correct Answer: Treatment I causes denaturation with preservation of primary structure, whereas Treatment II cleaves peptide linkages and destroys the original primary structure.
Explanation: \(\textbf{Chemical basis of primary structure:}\)
The primary structure of a protein is the particular sequence of amino acid residues joined through covalent peptide bonds. The order of these residues establishes the identity of the polypeptide chain.
\(\textbf{Effect of Treatment I:}\)
The first treatment disrupts interactions responsible for maintaining the native three-dimensional conformation of the enzyme.
Such a change is characteristic of protein denaturation. Secondary and tertiary structural arrangements may be disturbed, and an enzyme may lose catalytic activity because the molecular organisation needed for its function is no longer maintained.
However, the question explicitly states that the amino acid sequence and peptide bonds remain intact.
Therefore, the original primary structure is preserved despite loss of catalytic activity.
\(\textbf{Effect of Treatment II:}\)
Complete hydrolysis breaks the peptide linkages connecting amino acid residues.
For an individual peptide bond, the general chemical transformation is:
\[
\mathrm{-CO-NH-+H_2O\longrightarrow -COOH+H_2N-}
\]
The displayed groups represent the functional-group changes associated with amide-bond hydrolysis.
When all peptide bonds are hydrolysed, the original ordered polypeptide chain no longer exists.
Consequently, its original primary structure is destroyed.
\(\textbf{Integrated comparison:}\)
Denaturation and complete hydrolysis are chemically different processes. Denaturation primarily affects native protein conformation, whereas complete hydrolysis disrupts the covalent connectivity of the peptide backbone.
The distinction explains why loss of enzyme activity does not automatically prove that the enzyme has been broken down into free amino acids.
538. Four biomolecular observations are recorded in a laboratory.
| Observation | Finding |
| P | A glucose polymer releases free glucose on complete hydrolysis. |
| Q | A polypeptide releases constituent alpha-amino acids on complete peptide-bond hydrolysis. |
| R | A nucleic acid releases nucleotide-derived units on selective phosphodiester-bond hydrolysis. |
| S | A small organic compound is required in the diet in relatively small quantities but is not itself a repeating-unit polymer. |
A student concludes that the common biological importance of P, Q, R and S requires all four to possess the same repeating monomer and the same hydrolysable linkage.
Which statement most accurately evaluates the conclusion?
ⓐ. It is correct because every biomolecule is composed exclusively of alpha-amino acid residues.
ⓑ. It is correct for P and R because glycosidic and phosphodiester linkages are chemically identical.
ⓒ. It is incorrect only for Q because proteins do not contain hydrolysable covalent bonds.
ⓓ. It is incorrect: the substances differ in their subunits, covalent linkages and even whether they are polymers.
Correct Answer: It is incorrect: the substances differ in their subunits, covalent linkages and even whether they are polymers.
Explanation: Carbohydrate polymers contain monosaccharide-derived units joined through glycosidic linkages. Complete hydrolysis of a glucose-only polysaccharide can therefore release glucose. Polypeptides instead contain alpha-amino acid residues joined through peptide bonds. Hydrolysis of those bonds releases constituent amino acids rather than glucose units. Nucleic acids contain nucleotide units joined through phosphodiester linkages. Selective cleavage of that backbone produces nucleotide-derived fragments rather than ordinary amino acid or glucose units. The fourth observation is consistent with the general description of a vitamin required in relatively small dietary quantities. Vitamins are chemically diverse substances and are not defined as repeating-unit polymers. Consequently, biological importance does not establish a shared monomer or common covalent linkage among these substances. Glycosidic, peptide and phosphodiester bonds differ in their constituent atoms and chemical connectivity. Their hydrolysis products consequently reveal different aspects of the original biomolecular structures. The student's conclusion incorrectly treats biological function as a sufficient criterion for molecular classification. The correct interpretation distinguishes chemical composition, covalent bonding and biological significance.
539. Two open-chain ketose monosaccharides P and Q have the following structures:
P: \(\mathrm{CH_2OH-CO-CH_2OH}\)
Q: \(\mathrm{CH_2OH-CO-CH(OH)-CH_2OH}\)
Both compounds contain a ketonic carbonyl group at C2.
All carbon atoms have their usual isotopic compositions, and neither compound contains additional substituents.
Which statement correctly compares their carbon-chain classification and configurational possibilities?
ⓐ. P is a ketotetrose with one asymmetric carbon, whereas Q is a ketotriose without asymmetric carbon atoms.
ⓑ. P is an achiral ketotriose, whereas Q is a ketotetrose with one asymmetric carbon that can exist in D- and L-configurational forms.
ⓒ. Both are ketotrioses, and both possess D- and L-configurational forms because each contains a ketonic carbonyl group.
ⓓ. P is an aldotriose, whereas Q is an aldotetrose; both possess terminal aldehydic groups.
Correct Answer: P is an achiral ketotriose, whereas Q is a ketotetrose with one asymmetric carbon that can exist in D- and L-configurational forms.
Explanation: \(\textbf{Classification of P:}\)
P contains three carbon atoms, with the carbonyl group at the middle carbon. Therefore, P is a ketotriose, specifically dihydroxyacetone.
The carbonyl carbon is trigonal planar and cannot act as an ordinary tetrahedral asymmetric carbon. The remaining carbon atoms are hydroxymethyl groups, each bearing two hydrogen atoms.
Consequently, P contains no asymmetric carbon and is achiral.
\(\textbf{Classification of Q:}\)
Q contains four carbon atoms. Its carbonyl group remains at C2, so Q is classified as a ketotetrose.
The third carbon atom is attached to four different groups: hydrogen, hydroxyl, a carbonyl-containing portion of the chain and a hydroxymethyl group.
Therefore, C3 is an asymmetric carbon.
\(\textbf{Configurational consequence:}\)
Because Q possesses one asymmetric carbon, it can exist as a pair of enantiomeric configurations. Its D- or L-designation can be assigned by the orientation of the hydroxyl group at this asymmetric carbon in the conventional Fischer projection.
P does not possess the corresponding configurational pair because it has no asymmetric carbon.
\(\textbf{Molecular comparison:}\)
The molecular formula of P is \(\mathrm{C_3H_6O_3}\), whereas Q has molecular formula \(\mathrm{C_4H_8O_4}\).
Both compounds belong to the ketose class, but increasing the carbon-chain length from three to four introduces a stereogenic centre in the specified structure of Q.
Thus, identical carbonyl classification does not require identical carbon counts or stereochemical behaviour.
540. A sample of open-chain D-glucose is divided into three portions and subjected to independent reactions.
| Portion | Reagent | Observed change |
| P | Hydroxylamine | Formation of an oxime |
| Q | Hydrogen cyanide | Formation of a cyanohydrin |
| R | Bromine water under suitable mild conditions | Formation of gluconic acid |
A researcher compares the implications of these reactions for carbonyl identification and the number of carbon atoms in the resulting organic molecules.
Which conclusion is correct?
ⓐ. P and R establish the presence of a carbonyl-derived reactive group, but Q necessarily destroys one carbon atom of glucose.
ⓑ. P and Q prove that glucose possesses two independent carbonyl groups because both reagents give addition products.
ⓒ. R increases the carbon count from six to seven because oxidation introduces an additional carboxyl carbon.
ⓓ. P retains the six-carbon skeleton, Q forms a seven-carbon cyanohydrin through incorporation of the HCN carbon, and R preserves six carbons while oxidising the aldehydic group.
Correct Answer: P retains the six-carbon skeleton, Q forms a seven-carbon cyanohydrin through incorporation of the HCN carbon, and R preserves six carbons while oxidising the aldehydic group.
Explanation: Glucose contains six carbon atoms and possesses an aldehydic group in its open-chain structure. Hydroxylamine reacts with an aldehydic or ketonic group to produce an oxime. During this reaction, the carbonyl carbon remains part of the original carbon skeleton. Therefore, the glucose oxime still contains six carbon atoms. Hydrogen cyanide undergoes addition to a carbonyl group to form a cyanohydrin. The carbon atom of the cyanide group becomes an additional carbon in the organic product. Consequently, the glucose cyanohydrin contains seven carbon atoms altogether. This does not mean that glucose originally contained seven carbon atoms. Bromine water oxidises the glucose aldehydic group to a carboxylic acid group under suitable mild conditions. The resulting gluconic acid retains the original six-carbon skeleton because oxidation changes the functional group without adding a carbon atom. None of these reactions requires glucose to possess two separate carbonyl groups. The comparison distinguishes functional-group transformation from a genuine change in carbon-atom inventory.
541. An ordinary linear tripeptide contains one alanine, one aspartic acid and one lysine residue.
The peptide has one free alpha-amino terminus and one free alpha-carboxyl terminus.
Aspartic acid contributes one additional side-chain carboxyl group.
Lysine contributes one additional side-chain amino group.
Treatment I converts only the free alpha-amino terminus into a neutral derivative.
Treatment II, performed subsequently, converts only the free alpha-carboxyl terminus into a neutral ester.
Neither treatment changes the residue sequence or the side-chain functional groups.
In strongly acidic medium, free amino groups are protonated and carboxyl groups are neutral.
In strongly basic medium, free amino groups are neutral and carboxyl groups are deprotonated.
Which pair correctly gives the limiting net charges of the doubly modified peptide under strongly acidic and strongly basic conditions?
ⓐ. \(+2\) and \(-2\)
ⓑ. \(+1\) and \(-2\)
ⓒ. \(+1\) and \(-1\)
ⓓ. \(+2\) and \(-1\)
Correct Answer: \(+1\) and \(-1\)
Explanation: \(\textbf{Ionisable groups before modification:}\)
The intact tripeptide initially contains one free alpha-amino terminus and one free alpha-carboxyl terminus.
Lysine contributes an additional side-chain amino group.
Aspartic acid contributes an additional side-chain carboxyl group.
Therefore:
\[
N_{\mathrm{free\ amino,initial}}=1+1=2
\]
\[
N_{\mathrm{free\ carboxyl,initial}}=1+1=2
\]
\(\textbf{Effect of terminal-group modification:}\)
Treatment I neutralises the N-terminal alpha-amino functionality.
The lysine side-chain amino group remains available.
Treatment II esterifies the C-terminal alpha-carboxyl group.
The aspartic acid side-chain carboxyl group remains available.
\[
N_{\mathrm{free\ amino,modified}}=2-1=1
\]
\[
N_{\mathrm{free\ carboxyl,modified}}=2-1=1
\]
\(\textbf{Strongly acidic limit:}\)
The remaining lysine side-chain amino group is protonated.
The remaining aspartic acid side-chain carboxyl group is neutral.
\[
q_{\mathrm{acid}}=+1
\]
\(\textbf{Strongly basic limit:}\)
The remaining amino group is neutral.
The aspartic acid side-chain carboxyl group is deprotonated.
\[
q_{\mathrm{base}}=-1
\]
\(\textbf{Chemical interpretation:}\)
The terminal modifications remove one acidic and one basic site without changing the identities of the three amino acid residues.
Consequently, the modified peptide retains amphoteric side-chain functionality despite having both original terminal groups blocked.
The calculation depends on the distinction between alpha-functional groups and side-chain groups.
\(\textbf{Final answer:}\)
\[
\boxed{q_{\mathrm{acid}}=+1;\qquad q_{\mathrm{base}}=-1}
\]
542. A protein contains two folded polypeptide subunits P and Q.
Each subunit contains a regular alpha-helical region.
A separate beta-pleated-sheet region is formed by association of an extended segment from P with an extended segment from Q.
The two subunits also associate through other non-covalent interactions.
Treatment I selectively disrupts hydrogen bonds between the extended segments without disturbing the intrachain alpha-helical hydrogen bonds.
Treatment II subsequently separates P and Q without cleaving peptide bonds.
Which statement correctly evaluates the possible structural consequences?
ⓐ. Treatment I can disrupt the intersubunit beta-sheet arrangement while preserving the alpha-helical regions; Treatment II can then remove the remaining quaternary association.
ⓑ. Treatment I necessarily destroys both alpha-helices because all protein hydrogen bonds are identical in their spatial locations.
ⓒ. Treatment II must hydrolyse the peptide backbones because quaternary association is defined by peptide bonds between subunits.
ⓓ. Treatment I must first destroy P's alpha helix, whereas II can leave the original subunit association intact.
Correct Answer: Treatment I can disrupt the intersubunit beta-sheet arrangement while preserving the alpha-helical regions; Treatment II can then remove the remaining quaternary association.
Explanation: Protein secondary structure includes alpha-helices and beta-pleated sheets. These arrangements depend substantially on hydrogen bonding involving peptide backbone groups. However, the participating backbone groups need not occupy the same spatial positions in every secondary structure. The alpha-helical regions of P and Q are stabilised through intrachain interactions. The specified beta-sheet region instead depends on hydrogen bonding between extended segments belonging to different subunits. Treatment I selectively disrupts the latter interactions. Therefore, the intersubunit beta-sheet arrangement can be disturbed while the intrachain alpha-helices remain intact. The protein may still possess other non-covalent associations between its subunits after Treatment I. Treatment II subsequently disrupts those remaining associations and separates P from Q. This removes the original quaternary assembly without requiring cleavage of peptide bonds. The amino acid sequences of the two chains can remain unchanged throughout. The question distinguishes the structural location of hydrogen bonds from the separate issue of subunit association.
543. Three nucleotide-containing preparations are examined:
P is a DNA strand whose bases include thymine but not uracil.
Q is an RNA strand whose bases include uracil but not thymine.
R is a mixture containing equal numbers of free thymine and uracil bases, together with ribose and 2-deoxyribose.
An analyst detects thymine, uracil, ribose and 2-deoxyribose after complete hydrolysis of a combined sample.
The analyst concludes that the original sample necessarily contained one unusual polynucleotide chain incorporating all four components.
Which inference is most defensible?
ⓐ. The analyst's conclusion is unavoidable because a mixture of DNA and RNA cannot contain both thymine and uracil.
ⓑ. The identified components establish the presence of nucleotide-related material but do not, by themselves, prove that all components originally belonged to one covalently connected chain.
ⓒ. The detected bases establish that every original strand was RNA because RNA always contains both thymine and uracil.
ⓓ. The detected sugars establish that every original strand was DNA because ribose and 2-deoxyribose are structurally identical.
Correct Answer: The identified components establish the presence of nucleotide-related material but do not, by themselves, prove that all components originally belonged to one covalently connected chain.
Explanation: DNA and RNA differ in their characteristic pentose sugars and one principal pyrimidine base. Ordinary DNA contains 2-deoxyribose and thymine. Ordinary RNA contains ribose and uracil. A sample containing DNA, RNA and free nucleic-acid-related components may consequently contain all four substances identified by the analyst. Complete hydrolysis reveals chemical constituents but can destroy the covalent connectivity that existed in the starting molecules. Therefore, the final mixture does not necessarily establish which components originally belonged to the same polymer chain. The presence of thymine does not require uracil to occupy the same nucleotide sequence. Likewise, detecting both ribose and 2-deoxyribose does not prove that they occurred in one original polynucleotide. The analyst would need structural or sequence-specific evidence to establish that unusual connectivity. The observations are compatible with a mixture of ordinary DNA-related and RNA-related materials. The correct conclusion distinguishes identification of constituent molecules from reconstruction of their original molecular organisation.
544. A laboratory compares three ordinary amino acids: glycine, alanine and isoleucine.
Glycine has the alpha-carbon substituent H.
Alanine has the alpha-carbon substituent –CH₃.
Isoleucine has the side chain –CH(CH₃)CH₂CH₃.
All three possess the ordinary alpha-amino and alpha-carboxyl functional groups.
The stereochemical investigation includes every asymmetric carbon in the specified structures and excludes additional sources of stereoisomerism.
Which statement correctly compares their maximum configurational possibilities?
ⓐ. Glycine has two, alanine has two and isoleucine has four.
ⓑ. Glycine has one, alanine has four and isoleucine has four.
ⓒ. Glycine has two, alanine has four and isoleucine has eight.
ⓓ. Glycine has one, alanine has two and isoleucine has four.
Correct Answer: Glycine has one, alanine has two and isoleucine has four.
Explanation: \(\textbf{Asymmetric carbon in glycine:}\)
Glycine has two hydrogen substituents attached to its alpha carbon.
Therefore, that carbon is not asymmetric.
\[
n_{\mathrm{Gly}}=0
\]
\(\textbf{Asymmetric carbon in alanine:}\)
Alanine's alpha carbon is attached to four different groups.
Its methyl side chain contains no additional asymmetric carbon.
\[
n_{\mathrm{Ala}}=1
\]
\(\textbf{Asymmetric carbons in isoleucine:}\)
Isoleucine has an asymmetric alpha carbon.
The carbon directly attached to the alpha carbon within its side chain is also asymmetric because it bears four different substituents.
\[
n_{\mathrm{Ile}}=2
\]
\(\textbf{Maximum configurational counts:}\)
For independent asymmetric centres without meso-form reductions:
\[
N=2^n
\]
For glycine:
\[
N_{\mathrm{Gly}}=2^0=1
\]
For alanine:
\[
N_{\mathrm{Ala}}=2^1=2
\]
For isoleucine:
\[
N_{\mathrm{Ile}}=2^2=4
\]
\(\textbf{Chemical interpretation:}\)
The naturally occurring L-configuration identifies particular stereochemical forms but does not remove the existence of other configurational possibilities.
The number of asymmetric centres must be established from actual substituent identities, not merely from the designation alpha-amino acid.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{Gly}}=1;\quad N_{\mathrm{Ala}}=2;\quad N_{\mathrm{Ile}}=4}
\]
545. Two ordinary disaccharides P and Q are isolated from different sources.
P is sucrose obtained from a plant source.
Q is lactose obtained from milk.
Both contain one glycosidic linkage per molecule.
On complete hydrolysis, P produces glucose and fructose, whereas Q produces glucose and galactose.
Before hydrolysis, P gives a negative ordinary reducing-sugar test, while Q gives a positive test.
A student argues that the difference arises solely because fructose is a ketose and galactose is an aldose.
Which conclusion best evaluates the argument?
ⓐ. The argument is sufficient because every compound containing fructose must be non-reducing and every compound containing galactose must be reducing.
ⓑ. P and Q must have the same reducing behaviour because each hydrolyses to two monosaccharides.
ⓒ. The decisive difference is the availability of a free anomeric centre in the intact disaccharides; P uses both anomeric centres in its linkage, while Q retains the glucose reducing end.
ⓓ. Q must contain an unlinked galactose molecule because its reducing behaviour requires two independent monosaccharides.
Correct Answer: The decisive difference is the availability of a free anomeric centre in the intact disaccharides; P uses both anomeric centres in its linkage, while Q retains the glucose reducing end.
Explanation: Sucrose and lactose are both disaccharides, but their constituent units and glycosidic connectivity differ. Sucrose contains glucose and fructose connected through their respective anomeric centres. Therefore, neither monosaccharide-derived unit retains a free anomeric hemiacetal or hemiketal centre in intact sucrose. This explains its ordinary non-reducing behaviour. Lactose contains galactose and glucose connected through the anomeric centre of galactose and the C4 hydroxyl position of glucose. Its glucose anomeric centre consequently remains free. That reducing end can participate in ring–chain interconversion and supply a carbonyl-containing form. The difference between the two disaccharides therefore depends on how their units are linked, not simply on the aldose or ketose classification of the constituent monosaccharides. Free fructose itself can exhibit reducing behaviour under suitable alkaline conditions. Thus, the student's proposed rule is too broad. Complete hydrolysis identifies the constituent monosaccharides but does not alone explain the reducing behaviour of the intact disaccharides. The correct interpretation combines hydrolysis composition with the availability of the relevant anomeric functional group.
546. Two ordinary polypeptides are formed from the same five alpha-amino acids but in different orders.
P has the sequence Gly–Ala–Ser–Val–Lys.
Q has the sequence Lys–Val–Ser–Ala–Gly.
The configuration of every asymmetric amino acid residue is identical in P and Q.
Each molecule is an ordinary linear pentapeptide, and no side-chain linkage is present.
An analytical procedure identifies the free N-terminal amino acid of each peptide.
A different procedure completely hydrolyses both molecules and measures their amino acid compositions.
Which conclusion is correct?
ⓐ. Terminal identification distinguishes P and Q, but complete hydrolysis can give identical amino acid compositions.
ⓑ. Complete hydrolysis must distinguish the peptides because reversing a sequence necessarily changes its amino acid composition.
ⓒ. P and Q are enantiomers because their amino acid sequences are written in opposite directions.
ⓓ. The terminal-identification procedure must give the same result because both peptides contain glycine.
Correct Answer: Terminal identification distinguishes P and Q, but complete hydrolysis can give identical amino acid compositions.
Explanation: The primary structure of a peptide specifies the ordered sequence of amino acid residues from one terminus to the other. P and Q contain the same five amino acid types but in different orders. In P, glycine occupies the free amino terminus. In Q, lysine occupies that position. Therefore, an analytical procedure identifying the N-terminal residue can distinguish the two molecules. Complete hydrolysis breaks the peptide linkages and releases their constituent amino acids. Because the two peptides have identical overall amino acid compositions, their fully hydrolysed mixtures can contain the same quantities of the same amino acids. This does not establish that the original peptides possessed identical primary structures. The reversed ordering also does not make P and Q enantiomers. Enantiomerism requires the appropriate opposite configurations at asymmetric centres rather than reversal of residue order alone. The amino acid configurations are explicitly stated to be identical. The example distinguishes sequence information from composition and stereochemical configuration.
547. An enzyme-catalysed hydrolysis reaction is studied at different temperatures.
The horizontal axis represents temperature, and the vertical axis represents the reaction rate measured after the same short observation time.
The rate initially increases as temperature rises from a low value.
It reaches a maximum at an intermediate temperature.
At substantially higher temperatures, the rate falls sharply despite the presence of unchanged substrate concentration.
Independent examination shows that the enzyme's peptide bonds remain intact, but its native globular conformation is disturbed at the higher temperatures.
Which inference best accounts for the non-monotonic temperature dependence?
ⓐ. The initial increase and later decrease both establish that the substrate has been converted into a different element.
ⓑ. Temperature may initially accelerate catalysis, but excessive heat disrupts the enzyme's active conformation.
ⓒ. The sharp decrease proves that the reaction's equilibrium constant becomes zero whenever the enzyme is heated.
ⓓ. The rate maximum proves that the enzyme's primary amino acid sequence changes at every temperature.
Correct Answer: Temperature may initially accelerate catalysis, but excessive heat disrupts the enzyme's active conformation.
Explanation: Enzymes are biological catalysts whose activity depends on suitable physical and chemical conditions. At relatively low temperatures, increasing temperature can increase the frequency and effectiveness of molecular encounters associated with reaction progress. Consequently, an initial rise in the observed reaction rate is reasonable. However, protein enzymes possess specific native conformations that are important for catalytic activity. Heating sufficiently strongly can disturb hydrogen bonds and other stabilising interactions within these structures. The enzyme may then become denatured and lose the conformation needed for effective catalysis. This can outweigh the ordinary tendency for reaction processes to become faster as temperature increases. Therefore, the observed rate can reach a maximum and subsequently decrease. The problem explicitly establishes that peptide bonds remain intact, so complete backbone hydrolysis is not required to explain the decline. A loss of enzyme activity also does not imply that the substrate has been chemically transformed into another element. The graph is consistent with the combined effects of temperature on reaction processes and on the stability of the protein catalyst. It does not establish a change in equilibrium constant merely from the shape of the rate curve.
548. A purified sample contains a mixture of one ordinary linear peptide and one free amino acid.
The peptide contains exactly four glycine residues and one alanine residue.
The separate free amino acid is alanine.
The peptide is completely hydrolysed, releasing all constituent amino acids without decomposition.
Take molar masses:
Glycine \(=75\ \mathrm{g\,mol^{-1}}\)
Alanine \(=89\ \mathrm{g\,mol^{-1}}\)
Water \(=18\ \mathrm{g\,mol^{-1}}\).
The original sample contains one mole of the pentapeptide and one mole of free alanine.
What are the original total mass of the two-mole molecular mixture and the total mass after complete peptide hydrolysis?
ⓐ. \(317\ \mathrm{g}\) initially and \(389\ \mathrm{g}\) finally
ⓑ. \(406\ \mathrm{g}\) initially and \(478\ \mathrm{g}\) finally
ⓒ. \(406\ \mathrm{g}\) initially and \(406\ \mathrm{g}\) finally
ⓓ. \(317\ \mathrm{g}\) initially and \(406\ \mathrm{g}\) finally
Correct Answer: \(406\ \mathrm{g}\) initially and \(478\ \mathrm{g}\) finally
Explanation: \(\textbf{Constituent amino acid mass of the pentapeptide:}\)
The peptide contains four glycine residues and one alanine residue.
If these units were present as free amino acids, their combined molar mass would be:
\[
M_{\mathrm{free\ peptide\ constituents}}=4(75)+89
\]
\[
M_{\mathrm{free\ peptide\ constituents}}=300+89
\]
\[
M_{\mathrm{free\ peptide\ constituents}}=389\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Mass removed during peptide formation:}\)
An ordinary linear pentapeptide contains four peptide bonds.
Formation of these bonds eliminates four water molecules.
\[
N_{\mathrm{peptide\ bonds}}=5-1=4
\]
\[
M_{\mathrm{water\ eliminated}}=4(18)=72\ \mathrm{g\,mol^{-1}}
\]
Therefore:
\[
M_{\mathrm{pentapeptide}}=389-72
\]
\[
M_{\mathrm{pentapeptide}}=317\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Original mixture mass:}\)
The sample also contains one mole of free alanine.
\[
m_{\mathrm{initial}}=317+89
\]
\[
m_{\mathrm{initial}}=406\ \mathrm{g}
\]
\(\textbf{Mass after complete hydrolysis:}\)
Hydrolysis of the pentapeptide consumes four moles of water per mole of peptide.
\[
m_{\mathrm{water\ consumed}}=4(18)=72\ \mathrm{g}
\]
The released amino acids therefore have a combined mass equal to the original sample mass plus the incorporated water.
\[
m_{\mathrm{final}}=406+72
\]
\[
m_{\mathrm{final}}=478\ \mathrm{g}
\]
\(\textbf{Independent composition check:}\)
The final mixture contains four moles of glycine and two moles of alanine.
\[
m_{\mathrm{final}}=4(75)+2(89)
\]
\[
m_{\mathrm{final}}=300+178=478\ \mathrm{g}
\]
Both methods agree, provided the water consumed during hydrolysis is included in the product mass.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{initial}}=406\ \mathrm{g};\qquad m_{\mathrm{final}}=478\ \mathrm{g}}
\]
549. A purified RNA preparation is treated with two selective reagents.
Treatment I removes the terminal phosphate group from a nucleotide while preserving the nitrogenous base–sugar linkage.
Treatment II, applied subsequently, hydrolyses the bond between the nitrogenous base and the pentose sugar without changing their chemical identities.
The original nucleotide contains adenine attached to ribose.
No other reaction occurs.
Which sequence of principal products is consistent with the chemical constitution of nucleotides?
ⓐ. Treatment I: guanosine; Treatment II: guanine and 2-deoxyribose
ⓑ. Treatment I: adenine; Treatment II: adenine and phosphate
ⓒ. Treatment I: adenosine; Treatment II: adenine and ribose
ⓓ. Treatment I: thymidine; Treatment II: thymine and ribose
Correct Answer: Treatment I: adenosine; Treatment II: adenine and ribose
Explanation: A nucleotide contains a nitrogenous base, a pentose sugar and a phosphate component. A nucleoside contains the base and sugar but lacks the phosphate component. The starting nucleotide is specified to contain adenine attached to ribose. Removing its phosphate component while preserving the base–sugar linkage therefore produces adenosine. This is the corresponding nucleoside. Treatment II acts on the remaining bond between adenine and ribose. Hydrolysis of that linkage separates the nitrogenous base from the pentose sugar. Therefore, its products are adenine and ribose. Neither treatment is specified to transform adenine into guanine or thymine. The reactions also do not remove oxygen from ribose to produce 2-deoxyribose. The correct interpretation requires distinguishing the phosphate–sugar connection from the base–sugar connection. It also requires preserving the identity of the original base and pentose throughout the selective hydrolysis sequence. The example illustrates the structural hierarchy from nucleotide to nucleoside to separate base and sugar.
550. A nutritional comparison involves vitamin D and vitamin K.
A student states that both are fat-soluble and therefore must perform the same physiological function.
Another student argues that vitamin D deficiency has different characteristic manifestations in children and adults, while vitamin K deficiency is associated with a blood-clotting abnormality.
Neither student is discussing individual diagnosis or treatment.
Which conclusion is most appropriate?
ⓐ. Both students are correct because fat solubility establishes identical biological function while permitting different deficiency diseases.
ⓑ. The second student's distinction is correct: vitamin D deficiency causes rickets in children and osteomalacia in adults.
ⓒ. Only the first student's statement is supported because vitamins D and K are both stored in adipose tissues.
ⓓ. Neither statement is supported because vitamin D is water-soluble while vitamin K is fat-soluble.
Correct Answer: The second student's distinction is correct: vitamin D deficiency causes rickets in children and osteomalacia in adults.
Explanation: Vitamin D and vitamin K both belong to the fat-soluble group of vitamins. This classification concerns their solubility properties rather than establishing identical biological roles. Vitamin D is associated with normal bone development and maintenance. NCERT identifies rickets in children and osteomalacia in adults as characteristic deficiency conditions. The age qualification is important because the corresponding manifestations are described differently. Vitamin K is associated with normal blood clotting. Its deficiency results in increased blood clotting time. Consequently, the two vitamins possess distinct characteristic deficiency associations despite belonging to the same solubility group. The first student's inference is therefore incorrect. The second student's comparison is consistent with the NCERT vitamin table. Fat-soluble classification does not permit one vitamin's biological function to be substituted automatically for that of another. The question tests the distinction between physicochemical classification and particular biological importance.
551. A hormone preparation contains three chemically different substances:
| Substance | Chemical class | Function |
| P | Polypeptide | Contributes to lowering elevated blood glucose |
| Q | Steroid | Associated with regulation of water and salt excretion by the kidneys |
| R | Amino acid derivative | Iodine-containing thyroid hormone |
An investigator applies a reagent that selectively hydrolyses peptide bonds without modifying steroid structures or ordinary amino acid-derived hormone molecules.
Which statement correctly combines the identities and the predicted direct reaction?
ⓐ. P is insulin, Q mineralocorticoids and R thyroxine; peptide hydrolysis can act on P, not on the other two by that mechanism.
ⓑ. P is glucagon, Q belongs to the glucocorticoids and R is epinephrine; all three must undergo identical peptide hydrolysis.
ⓒ. P is thyroxine, Q is insulin and R is testosterone; only Q has a steroid framework.
ⓓ. P is sucrase, Q is vitamin K and R is albumin; all three are hormones possessing identical peptide backbones.
Correct Answer: P is insulin, Q mineralocorticoids and R thyroxine; peptide hydrolysis can act on P, not on the other two by that mechanism.
Explanation: Insulin is a polypeptide hormone involved in regulating blood glucose concentration. Its action is associated with lowering elevated blood glucose levels, identifying P. Mineralocorticoids are steroid hormones produced by the adrenal cortex and associated with regulation of water and salt excretion. Therefore, Q belongs to the mineralocorticoid class. Thyroxine is an iodinated derivative of tyrosine produced by the thyroid gland, identifying R. The three substances consequently represent different hormone classes. Insulin possesses amino acid residues connected through peptide linkages. A reagent specifically hydrolysing peptide bonds can therefore act on its polypeptide backbone. Mineralocorticoids have steroid structures rather than ordinary polypeptide backbones. Thyroxine is an amino acid-derived hormone but is not itself an ordinary peptide chain. Consequently, the specified reagent need not fragment Q or R. Their shared biological designation as hormones does not imply identical chemical constitution. The result distinguishes the chemical structure of a hormone from its role as a messenger in biological coordination.
552. Two solutions contain equal initial amounts of sucrose.
P is hydrolysed completely using a suitable dilute mineral acid.
Q is hydrolysed completely using active sucrase under suitable conditions.
Both solutions initially contain \(0.25\ \mathrm{mol}\) of sucrose.
No side reaction occurs, and the final products are glucose and fructose.
The activation energies of the two pathways may differ, but both reactions reach the same complete chemical conversion.
Which statement correctly compares the final chemical quantities?
ⓐ. Q must produce more fructose because enzyme catalysis always changes the product stoichiometry.
ⓑ. P must produce more glucose because acid hydrolysis consumes a larger amount of sucrose per reaction event.
ⓒ. Each solution produces \(0.25\ \mathrm{mol}\) glucose and \(0.25\ \mathrm{mol}\) fructose; the different catalysts need not change the final stoichiometric amounts.
ⓓ. Each solution produces \(0.50\ \mathrm{mol}\) glucose and \(0.50\ \mathrm{mol}\) fructose because every sucrose molecule yields two molecules of each monosaccharide.
Correct Answer: Each solution produces \(0.25\ \mathrm{mol}\) glucose and \(0.25\ \mathrm{mol}\) fructose; the different catalysts need not change the final stoichiometric amounts.
Explanation: \(\textbf{Stoichiometric relationship:}\)
Sucrose is a disaccharide consisting of one glucose unit and one fructose unit.
Complete hydrolysis uses one water molecule for each sucrose molecule.
\[
\mathrm{C_{12}H_{22}O_{11}+H_2O\rightarrow C_6H_{12}O_6+C_6H_{12}O_6}
\]
\(\textbf{Glucose obtained from either pathway:}\)
One mole of sucrose produces one mole of glucose.
\[
n_{\mathrm{glucose}}=n_{\mathrm{sucrose}}
\]
\[
n_{\mathrm{glucose}}=0.25\ \mathrm{mol}
\]
\(\textbf{Fructose obtained from either pathway:}\)
One mole of sucrose also produces one mole of fructose.
\[
n_{\mathrm{fructose}}=n_{\mathrm{sucrose}}
\]
\[
n_{\mathrm{fructose}}=0.25\ \mathrm{mol}
\]
\(\textbf{Total monosaccharide amount:}\)
\[
n_{\mathrm{monosaccharides}}=0.25+0.25
\]
\[
n_{\mathrm{monosaccharides}}=0.50\ \mathrm{mol}
\]
\(\textbf{Role of the catalytic conditions:}\)
Acid and sucrase can provide different catalytic pathways for the same overall hydrolysis.
Their activation energies and reaction rates may differ.
However, the stipulated complete conversion and absence of side reactions require the same glucose-to-fructose stoichiometry.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
n_{\mathrm{glucose}}=0.25\ \mathrm{mol}\\
n_{\mathrm{fructose}}=0.25\ \mathrm{mol}
\end{gathered}}
\]
553. A research group studies a mixture containing a protein, a DNA fragment and a carbohydrate polymer.
Treatment I disrupts hydrogen bonds responsible for the native folding of the protein but does not hydrolyse peptide bonds.
Treatment II separates the two complementary strands of the DNA fragment without breaking either phosphodiester backbone.
Treatment III hydrolyses the glycosidic linkages of the carbohydrate polymer, releasing free monosaccharides.
All three treatments preserve the chemical identities of the original constituent amino acids, nucleotides and monosaccharides.
Consider the following statements.
Statement I: Treatment I can impair protein function while leaving its primary amino acid sequence unchanged.
Statement II: Treatment II can preserve the ordered nucleotide sequence within each separated DNA strand.
Statement III: Treatment III changes the original covalent connectivity of the carbohydrate polymer.
Statement IV: All three treatments necessarily destroy the primary covalent sequences of their respective polymers.
Statement V: Similar biological consequences do not imply that the treatments break the same type of chemical bond.
Which statements are correct?
ⓐ. I, II, III and IV only
ⓑ. II, III, IV and V only
ⓒ. I, III and V only
ⓓ. I, II, III and V only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because protein denaturation can disturb the interactions stabilising secondary and tertiary structures without necessarily breaking peptide bonds. A protein may consequently lose biological activity while retaining its original amino acid sequence. Statement II is correct because complementary DNA strands are held together through hydrogen bonding between nitrogenous bases. Separating those strands without hydrolysing their phosphodiester backbones can preserve the nucleotide order within each individual chain. Statement III is correct because glycosidic linkages are covalent connections between carbohydrate-derived units. Their hydrolysis disrupts the original connectivity of the carbohydrate polymer and releases constituent monosaccharides. Statement IV is incorrect because the first two treatments are explicitly stated to preserve the corresponding covalent backbones. Only the third treatment necessarily hydrolyses the polymer's characteristic inter-unit covalent bonds. Statement V is correct because a loss of native organisation or biological function does not, by itself, identify the chemical bond being disrupted. Hydrogen-bond disruption in proteins and DNA is different from hydrolysis of glycosidic bonds in carbohydrates. The experiment therefore illustrates the need to distinguish higher-order structural changes from covalent backbone cleavage. Chemical outcomes must be inferred from the specific bonds affected rather than from the common biological importance of the materials.
554. A student investigates the apparently contradictory chemical behaviour of D-glucose.
Observation I: Glucose reacts with hydroxylamine to form an oxime.
Observation II: Glucose does not give the ordinary Schiff's test or the expected sodium hydrogensulphite addition product.
Observation III: Glucose exists in two crystalline forms, α and β.
Observation IV: Glucose pentaacetate does not react with hydroxylamine.
The student concludes that no single structural interpretation can explain all four observations.
Which explanation resolves the observations most appropriately?
ⓐ. Glucose permanently contains two aldehydic groups, but both become inactive in the presence of water.
ⓑ. Glucose contains a ketonic group at C2, and its two crystalline forms are D- and L-enantiomers.
ⓒ. Cyclic glucose can open to an aldehydic form; acetylation of its anomeric hydroxyl prevents ordinary ring opening.
ⓓ. Glucose loses its carbonyl carbon during cyclisation, and hydroxylamine regenerates that carbon atom before oxime formation.
Correct Answer: Cyclic glucose can open to an aldehydic form; acetylation of its anomeric hydroxyl prevents ordinary ring opening.
Explanation: The open-chain structure of D-glucose contains an aldehydic group at C1. This accounts for its ability to form an oxime with hydroxylamine. However, the ordinary open-chain structure alone does not explain several characteristic observations listed by NCERT. Glucose fails to show the expected Schiff's test and sodium hydrogensulphite addition behaviour under the stated ordinary conditions. It also exists in two crystalline forms called α-D-glucose and β-D-glucose. These observations are explained by the formation of a cyclic hemiacetal through intramolecular addition of the C5 hydroxyl group to the C1 aldehydic group. The two cyclic forms differ in configuration at the newly formed anomeric carbon. In aqueous solution, they can interconvert through a small proportion of the open-chain form. Thus, the carbonyl group can participate in appropriate reactions without being the predominant structural feature of glucose in solution. Acetylation of glucose produces a pentaacetate in which the anomeric hydroxyl is also protected. Under conditions that preserve this derivative, the ordinary hemiacetal ring opening is blocked, so the pentaacetate does not react with hydroxylamine. The structural interpretation must therefore distinguish the equilibrium behaviour of free glucose from the chemically protected anomeric centre of its pentaacetate.
555. An ordinary sucrose molecule contains an α-D-glucopyranose unit and a β-D-fructofuranose unit.
The glucose unit contains one six-membered ring with one ring oxygen.
The fructose unit contains one five-membered ring with one ring oxygen.
The glucose C1 and fructose C2 anomeric hydroxyl groups participate in the formation of a single inter-residue glycosidic linkage, with elimination of one water molecule.
Before condensation, each free cyclic monosaccharide contains five hydroxyl groups.
Assume that no other functional group is modified.
Which statement correctly gives the distribution of oxygen atoms in intact sucrose and its reducing character?
ⓐ. Ten free hydroxyl oxygens, one ring oxygen and no glycosidic oxygen; sucrose is reducing.
ⓑ. Eight free hydroxyl oxygens, two ring oxygens and one glycosidic oxygen; sucrose is non-reducing.
ⓒ. Nine free hydroxyl oxygens, one ring oxygen and one glycosidic oxygen; sucrose is reducing.
ⓓ. Eight free hydroxyl oxygens, one ring oxygen and two glycosidic oxygens; sucrose is non-reducing.
Correct Answer: Eight free hydroxyl oxygens, two ring oxygens and one glycosidic oxygen; sucrose is non-reducing.
Explanation: \(\textbf{Hydroxyl groups before condensation:}\)
Cyclic glucose contains five hydroxyl groups.
Cyclic fructose also contains five hydroxyl groups.
Therefore, the two separate monosaccharides initially possess:
\[
N_{\mathrm{OH,initial}}=5+5
\]
\[
N_{\mathrm{OH,initial}}=10
\]
\(\textbf{Formation of the glycosidic linkage:}\)
Condensation involves the glucose anomeric hydroxyl and the fructose anomeric hydroxyl.
One water molecule is eliminated, and one oxygen-containing glycosidic connection is formed.
Consequently, two originally free hydroxyl groups are no longer present as free hydroxyl groups.
\[
N_{\mathrm{OH,free}}=10-2
\]
\[
N_{\mathrm{OH,free}}=8
\]
\(\textbf{Oxygen atoms in the cyclic rings:}\)
The glucopyranose ring contains one ring oxygen.
The fructofuranose ring also contains one ring oxygen.
\[
N_{\mathrm{ring\ O}}=1+1
\]
\[
N_{\mathrm{ring\ O}}=2
\]
\(\textbf{Inter-residue oxygen:}\)
The two monosaccharide-derived units are joined through one glycosidic oxygen.
\[
N_{\mathrm{glycosidic\ O}}=1
\]
\(\textbf{Total oxygen inventory:}\)
\[
N_{\mathrm{O,total}}=8+2+1
\]
\[
N_{\mathrm{O,total}}=11
\]
This agrees with the molecular formula \(\mathrm{C_{12}H_{22}O_{11}}\).
\(\textbf{Reducing-character interpretation:}\)
Both anomeric centres participate in the glycosidic linkage.
Consequently, intact sucrose lacks a free anomeric hemiacetal or hemiketal centre and is non-reducing.
\(\textbf{Final answer:}\)
\[
\begin{gathered}
8\ \mathrm{free\ hydroxyl\ oxygens}\\
2\ \mathrm{ring\ oxygens},\ 1\ \mathrm{glycosidic\ oxygen}\\
11\ \mathrm{oxygen\ atoms\ in\ total}
\end{gathered}
\]
556. Two open-chain aldohexoses P and Q are represented by Fischer projections.
Both structures are written with the aldehydic carbon at the top and the terminal –CH₂OH group at the bottom.
P has its hydroxyl groups at C2, C3, C4 and C5 arranged right, left, right and right, respectively.
Q has the corresponding arrangements left, left, right and right.
The structures are otherwise identical.
No experimental optical-rotation measurements are provided.
Consider the following statements.
Statement I: P has the configuration of D-glucose.
Statement II: Q also belongs to the D-series because the configuration at its lowest asymmetric carbon is unchanged.
Statement III: P and Q are enantiomers because they differ at C2.
Statement IV: P and Q are C2 epimers.
Statement V: The sign of optical rotation of Q cannot be determined solely from its D-designation.
Which statements are correct?
ⓐ. I, II, III and IV only
ⓑ. II, III and V only
ⓒ. I, III, IV and V only
ⓓ. I, II, IV and V only
Correct Answer: I, II, IV and V only
Explanation: Statement I is correct because the specified Fischer arrangement for P corresponds to D-glucose. In the open-chain projection, D-glucose has the hydroxyl-group arrangement right, left, right and right from C2 to C5. Statement II is correct because D/L designation depends on the configuration at the lowest asymmetric carbon in the conventional Fischer representation. For these aldohexoses, that carbon is C5. The configuration at C5 remains unchanged in Q, so Q also belongs to the D-series. Statement III is incorrect because enantiomers have opposite configurations at every corresponding asymmetric centre. P and Q differ at C2 alone, while their configurations at C3, C4 and C5 remain identical. Statement IV is therefore correct because the compounds are C2 epimers, a particular type of diastereomer. Statement V is also correct because the D/L designation specifies relative configuration rather than the direction of optical rotation. D does not universally mean dextrorotatory, and L does not universally mean laevorotatory. Although P is the familiar D-(+)-glucose, the optical sign of an arbitrary related compound cannot be assigned from its D/L label alone. The correct combination separates stereochemical configuration, epimerism and experimentally determined optical rotation.
557. Two freshly prepared monosaccharide solutions contain pure D-glucose and pure D-fructose, respectively.
| Experiment | Operation |
| P | Each solution is independently treated with bromine water under conditions suitable for mild oxidation of aldehydic groups. |
| Q | Separate untreated portions are tested with alkaline Fehling's solution under suitable conditions. |
| R | The bromine-water-treated fructose sample is subsequently subjected to suitable alkaline reducing-sugar test conditions after removal of interfering bromine. |
Which statement best accounts for the combined observations?
ⓐ. Bromine water converts fructose directly into gluconic acid, while glucose remains unchanged because it is an aldose.
ⓑ. Fructose cannot respond to Fehling's solution because every reducing sugar must contain an aldehydic group in its predominant molecular form.
ⓒ. Both glucose and fructose must be non-reducing because their predominant cyclic forms do not display free carbonyl groups.
ⓓ. Bromine water oxidises glucose to gluconic acid but not fructose by the same direct ketone reaction.
Correct Answer: Bromine water oxidises glucose to gluconic acid but not fructose by the same direct ketone reaction.
Explanation: Glucose is an aldohexose and contains an aldehydic group in its open-chain form. Bromine water is a mild oxidising agent that can oxidise this group to produce gluconic acid. Fructose is instead a ketohexose with its open-chain carbonyl group at C2. Under the stated mild conditions, its ketonic group does not undergo the same direct aldehyde-to-carboxylic-acid oxidation. Therefore, the bromine-water observations can distinguish these two types of carbonyl functionality. However, a reducing-sugar test under alkaline conditions involves different reaction conditions. Fructose can undergo structural transformations in alkaline medium that permit it to behave as a reducing sugar. Consequently, both glucose and fructose can give positive results with suitable alkaline Fehling's solution. This does not establish that both originally contain aldehydic groups in their ordinary open-chain forms. The third experiment retains the fructose carbon skeleton after the specified mild treatment and examines it under a different set of chemical conditions. Its reducing behaviour is therefore compatible with the ketose classification. The key inference is that reagent identity and reaction medium must both be considered when interpreting apparently different carbohydrate test results.
558. An initially pure sucrose solution is hydrolysed in two successive stages under the same specified optical measurement conditions.
Stage I hydrolyses \(30\%\) of the original sucrose molecules.
Stage II hydrolyses \(60\%\) of the sucrose molecules remaining after Stage I.
Each hydrolysed sucrose molecule produces one glucose and one fructose molecule.
Specific rotations are sucrose \(+66.5^\circ\), glucose \(+52.5^\circ\), and fructose \(-92.4^\circ\).
Molar masses are sucrose \(342\ \mathrm{g\,mol^{-1}}\), glucose \(180\ \mathrm{g\,mol^{-1}}\), and fructose \(180\ \mathrm{g\,mol^{-1}}\).
Assume ideal mass-weighted additivity of specific rotations, a common optical path length, no other optically active products, and no change in anomeric contributions during measurement.
For the mixture, the specific rotation is the sum of each component's mass multiplied by its specific rotation, divided by the combined solute mass.
What is the approximate specific rotation of the final mixture?
ⓐ. \(+10.1^\circ\)
ⓑ. \(-10.1^\circ\)
ⓒ. \(+3.37^\circ\)
ⓓ. \(-3.37^\circ\)
Correct Answer: \(+3.37^\circ\)
Explanation: \(\textbf{Converting successive stages into total hydrolysis:}\)
Take \(1.00\ \mathrm{mol}\) of sucrose initially.
Stage I hydrolyses \(0.30\ \mathrm{mol}\), leaving \(0.70\ \mathrm{mol}\) of sucrose.
Stage II consumes \(60\%\) of this remainder, not \(60\%\) of the initial amount.
\[
n_{\mathrm{Stage\ II}}=0.60(0.70)=0.42\ \mathrm{mol}
\]
The total hydrolysed amount is:
\[
n_{\mathrm{hydrolysed}}=0.30+0.42=0.72\ \mathrm{mol}
\]
\(\textbf{Final component amounts:}\)
The remaining sucrose amount is:
\[
n_{\mathrm{sucrose}}=1.00-0.72=0.28\ \mathrm{mol}
\]
Each mole hydrolysed produces one mole of each monosaccharide.
\[
n_{\mathrm{glucose}}=n_{\mathrm{fructose}}=0.72\ \mathrm{mol}
\]
\(\textbf{Converting amounts to masses:}\)
\[
m_{\mathrm{sucrose}}=0.28(342)=95.76\ \mathrm{g}
\]
\[
m_{\mathrm{glucose}}=m_{\mathrm{fructose}}=0.72(180)=129.60\ \mathrm{g}
\]
The total solute mass includes the mass of water incorporated during hydrolysis.
\[
m_{\mathrm{total}}=95.76+129.60+129.60=354.96\ \mathrm{g}
\]
\(\textbf{Applying the mass-weighted rotation relation:}\)
The negative fructose contribution must be retained with its sign.
\[
[\alpha]_{\mathrm{mixture}}=
\frac{m_s[\alpha]_s+m_g[\alpha]_g+m_f[\alpha]_f}
{m_s+m_g+m_f}
\]
Substituting the final masses and specific rotations:
\[
[\alpha]_{\mathrm{mixture}}=
\frac{95.76(66.5)+129.60(52.5)-129.60(92.4)}
{354.96}
\]
\[
[\alpha]_{\mathrm{mixture}}=\frac{1197.00}{354.96}
\]
\[
[\alpha]_{\mathrm{mixture}}\approx+3.37^\circ
\]
\(\textbf{Physical check:}\)
The residual positive rotation is consistent with a mixture that has undergone \(72\%\) hydrolysis but has not yet reached the greater extent required for exact cancellation under the supplied data.
Treating the two hydrolysis percentages as additive would incorrectly give \(90\%\) conversion.
Using mole fractions without accounting for different component molar masses would also distort the result.
The positive sign indicates that the final solution remains slightly dextrorotatory.
\(\textbf{Final answer:}\)
\[
\boxed{[\alpha]_{\mathrm{mixture}}\approx+3.37^\circ}
\]
559. A laboratory compares native keratin and a purified globular protein.
Keratin is recovered as a fibrous, water-insoluble biological material.
The globular protein is initially water-soluble but forms an insoluble coagulated material after strong heating.
Peptide-bond analysis establishes that the heated protein retains its original peptide backbone.
A researcher claims that water-insolubility is sufficient evidence of protein denaturation in every case.
Which conclusion correctly evaluates the claim?
ⓐ. The claim is valid because every native protein must dissolve completely in water.
ⓑ. The claim is valid only for fibrous proteins because their peptide bonds are hydrolysed during normal structural formation.
ⓒ. The claim is invalid because heating can never affect protein solubility without destroying the entire amino acid sequence.
ⓓ. The claim is invalid: fibrous proteins can be natively insoluble, while denatured globular proteins may become insoluble.
Correct Answer: The claim is invalid: fibrous proteins can be natively insoluble, while denatured globular proteins may become insoluble.
Explanation: Proteins are classified as fibrous or globular partly according to their molecular shapes and typical solubility behaviour. Fibrous proteins contain elongated polypeptide arrangements and are generally water-insoluble. Keratin is a representative fibrous protein and can exist naturally in an insoluble structural form. Therefore, water-insolubility alone does not prove that keratin has undergone denaturation. Globular proteins generally possess more compact three-dimensional structures and are often water-soluble in their native forms. Heating can disturb the secondary and tertiary interactions stabilising such a protein. Denaturation can consequently produce aggregation or coagulation and a decrease in solubility. This structural disturbance need not involve complete hydrolysis of peptide bonds. The retained backbone in the heated sample is therefore compatible with denaturation. The researcher incorrectly uses a physical property as a universal diagnostic criterion without considering the protein's original class and state. A meaningful interpretation requires comparing the observed state with the known native behaviour of the particular protein. The correct conclusion distinguishes inherent fibrous insolubility from a solubility change associated with denaturation.
560. Four experimental observations concerning the chemical structure of D-glucose are listed below.
| Experiment | Chemical observation |
| P | Prolonged heating with HI produces n-hexane. |
| Q | Treatment with hydroxylamine produces an oxime. |
| R | Oxidation with bromine water produces gluconic acid. |
| S | Oxidation with nitric acid produces saccharic acid. |
Match each experiment in List I with its most appropriate structural deduction in List II.
List I (Experiments): P, Q, R and S
List II (Structural deductions):
(i) Presence of an accessible carbonyl group
(ii) Presence of an aldehydic rather than an ordinary ketonic carbonyl group
(iii) Six carbon atoms connected in an unbranched chain
(iv) Presence of a terminal primary alcoholic group
Which matching is correct?
ⓐ. P–(iii), Q–(i), R–(ii), S–(iv)
ⓑ. P–(i), Q–(iii), R–(iv), S–(ii)
ⓒ. P–(iii), Q–(ii), R–(i), S–(iv)
ⓓ. P–(iv), Q–(i), R–(iii), S–(ii)
Correct Answer: P–(iii), Q–(i), R–(ii), S–(iv)
Explanation: \(\textbf{Experiment P — Reaction with hydrogen iodide:}\)
Prolonged heating of glucose with hydrogen iodide produces n-hexane.
This observation provides evidence that the six carbon atoms in glucose are connected through a continuous, unbranched carbon chain.
Therefore, Experiment P matches deduction (iii).
\(\textbf{Experiment Q — Reaction with hydroxylamine:}\)
Hydroxylamine reacts with an accessible carbonyl group to produce an oxime.
Both suitable aldehydes and ketones can undergo this reaction.
Therefore, oxime formation establishes carbonyl functionality but does not independently distinguish an aldehyde from a ketone.
Consequently, Experiment Q matches deduction (i).
\(\textbf{Experiment R — Oxidation with bromine water:}\)
Bromine water is a mild oxidising reagent capable of converting an aldehydic group into a carboxylic acid group.
Glucose undergoes this reaction to form gluconic acid.
The relevant functional-group transformation is:
\[
\mathrm{R-CHO\xrightarrow{[O]}R-COOH}
\]
Under suitable mild conditions, an ordinary ketonic carbonyl group does not undergo the corresponding selective aldehyde oxidation.
Thus, Experiment R supports the presence of aldehydic functionality and matches deduction (ii).
\(\textbf{Experiment S — Oxidation with nitric acid:}\)
Nitric acid, under suitable oxidation conditions, converts glucose into saccharic acid, a dicarboxylic acid.
The resulting product contains carboxylic acid groups at both ends of the original six-carbon skeleton.
The aldehydic group at C1 is oxidised to a carboxylic acid group, while the terminal primary alcoholic group at C6 is also converted into a carboxylic acid group.
Together with the aldehydic functionality established by Experiment R, the formation of the dicarboxylic acid supports the presence of a primary alcoholic group at C6.
Therefore, Experiment S matches deduction (iv).
\(\textbf{Integrated structural conclusion:}\)
The four experiments provide complementary information about the constitution of D-glucose.
Experiment P identifies its unbranched carbon skeleton.
Experiment Q establishes accessible carbonyl functionality.
Experiment R identifies the aldehydic nature of that functionality.
Experiment S supports the presence of a terminal primary alcoholic group.
The correct matching is therefore P–(iii), Q–(i), R–(ii), S–(iv).
561. An ordinary linear tetrapeptide contains glycine, alanine, serine and valine, each exactly once.
Selective partial hydrolysis produces the ordered dipeptide fragments Gly–Ala and Ser–Val.
The two fragments arise from separate portions of the same original tetrapeptide sequence, and neither fragment contains a residue omitted from the overall composition.
No terminal amino acid has been independently identified.
The fragments are not assumed to overlap.
Which conclusion concerning the original primary structure is justified?
ⓐ. The original sequence must be Gly–Ala–Ser–Val because partial hydrolysis always releases fragments in N-terminal order.
ⓑ. The original sequence must be Ser–Val–Gly–Ala because serine contains an alcoholic hydroxyl group.
ⓒ. Both Gly–Ala–Ser–Val and Ser–Val–Gly–Ala remain compatible; the supplied fragments do not uniquely establish the complete sequence.
ⓓ. Four distinct complete sequences remain compatible because glycine and alanine can be interchanged within the observed Gly–Ala fragment.
Correct Answer: Both Gly–Ala–Ser–Val and Ser–Val–Gly–Ala remain compatible; the supplied fragments do not uniquely establish the complete sequence.
Explanation: A peptide's primary structure depends on the ordered arrangement of its amino acid residues. Partial hydrolysis can preserve local ordering information because the products retain peptide bonds between neighbouring residues. The observed Gly–Ala fragment therefore establishes glycine immediately before alanine somewhere in the original sequence. Similarly, the Ser–Val fragment establishes serine immediately before valine. The two fragments together account for all four residues of the tetrapeptide. However, they do not overlap through a shared amino acid residue. Consequently, their relative order cannot be established from the supplied observations alone. The original sequence may contain Gly–Ala followed by Ser–Val. It may alternatively contain Ser–Val followed by Gly–Ala. Both arrangements preserve the observed internal fragment sequences and the original composition. Reversing the order within either observed dipeptide would contradict the retained directional information. An independent terminal identification or an additional overlapping fragment would be needed to distinguish the two remaining possibilities. The correct conclusion recognises the difference between information that is established and information that remains undetermined.
562. A sample contains optically pure L-alanine and an equal molar amount of glycine.
A treatment converts exactly half of the L-alanine molecules into their D-enantiomers without changing their molecular formulas.
Glycine remains chemically unchanged.
Assume that the specific optical rotations of the D- and L-alanine enantiomers are equal in magnitude and opposite in sign under identical conditions.
The treatment neither destroys nor produces any amino acid molecules.
Which conclusion is correct?
ⓐ. Alanine's enantiomeric rotations cancel, while glycine is achiral; composition and molecular mass are unchanged.
ⓑ. The alanine portion must remain optically active because L-alanine and D-alanine possess different molecular formulas.
ⓒ. Glycine becomes optically active because racemisation of another amino acid necessarily creates an asymmetric carbon in glycine.
ⓓ. The treatment converts alanine into valine because reversal of configuration changes the number of carbon atoms.
Correct Answer: Alanine's enantiomeric rotations cancel, while glycine is achiral; composition and molecular mass are unchanged.
Explanation: Alanine contains an asymmetric alpha carbon and can exist in enantiomeric D- and L-forms. Enantiomers have identical molecular formulas and ordinary scalar physical properties under corresponding achiral conditions. However, they rotate plane-polarised light through equal angles in opposite directions under identical measurement conditions. The treatment converts half of the initial L-alanine into D-alanine. Consequently, the alanine portion contains equal molar amounts of the two enantiomers. Their optical rotations cancel, making that portion optically inactive under the stated assumptions. Glycine is different because its alpha carbon possesses two identical hydrogen substituents. It is therefore achiral and does not acquire optical activity merely because another amino acid undergoes a configurational change. Neither the alanine carbon skeleton nor its functional groups are changed into those of valine. The total number of alanine molecules and their combined molecular mass remain unchanged. Likewise, the glycine amount remains constant. The result illustrates that optical inactivity can arise either from molecular achirality or from cancellation between equal amounts of enantiomers.
563. A biochemical preparation contains three different substances:
P is a fat-soluble vitamin required in relatively small quantities for normal biological functioning.
Q is a steroid hormone involved in chemical coordination.
R is a water-soluble protein enzyme that accelerates a particular reaction.
A student proposes that P and Q must perform identical biological functions because both are associated with fat-soluble organic chemistry.
The student also concludes that R cannot be biologically important because it is soluble in water.
Which statement most appropriately evaluates both deductions?
ⓐ. Both deductions are correct because solubility determines the biological role of every organic compound.
ⓑ. The first deduction is correct, but the second is incorrect because only hormones are restricted to fat-soluble structures.
ⓒ. The second deduction is correct, but the first is incorrect because enzymes and vitamins belong to the same steroid class.
ⓓ. Both deductions are unsupported because solubility, chemical constitution and biological function are distinct classification considerations.
Correct Answer: Both deductions are unsupported because solubility, chemical constitution and biological function are distinct classification considerations.
Explanation: Fat-soluble vitamins belong to a nutritional class defined partly by their solubility properties. Steroid hormones are chemical messengers whose structures contain characteristic steroid frameworks. The fact that a vitamin and a steroid hormone may both associate favourably with nonpolar environments does not establish that they perform identical biological functions. Vitamins are required in relatively small quantities for normal physiological functioning. Hormones participate in coordination and regulation through chemical signalling. Protein enzymes perform another role by catalysing specific chemical reactions. Many globular protein enzymes are water-soluble in their native states. Water solubility therefore does not imply lack of biological importance. Nor does a shared biological requirement establish identical molecular structures. The student's reasoning incorrectly moves from one physicochemical property to a universal prediction of function. The three substances must instead be classified through their structures and their particular biological roles. This distinction is important because living systems depend on chemically diverse substances acting through different mechanisms.
564. A sample contains four carbohydrates with the following characteristics:
| Sample | Constitution |
| P | Free D-glucose |
| Q | Ordinary sucrose |
| R | Ordinary maltose |
| S | Cellulose |
An investigator claims that sweetness, reducing behaviour and classification as a carbohydrate are interchangeable criteria.
Which statement best identifies the flaw?
ⓐ. P and Q cannot be carbohydrates because both may taste sweet.
ⓑ. Carbohydrate classification depends on constitution and hydrolysis behaviour; neither sweetness nor reducing character is universal.
ⓒ. Every carbohydrate must be reducing because all carbohydrates contain a permanently free aldehydic group.
ⓓ. S must be a monosaccharide because a structural polysaccharide cannot consist of glucose units.
Correct Answer: Carbohydrate classification depends on constitution and hydrolysis behaviour; neither sweetness nor reducing character is universal.
Explanation: Carbohydrates include monosaccharides, oligosaccharides and polysaccharides. Their chemical classification depends on the nature of their constituent units and the products obtainable through suitable hydrolysis. Glucose is a monosaccharide and is a reducing sugar under appropriate test conditions. Sucrose is a disaccharide that lacks free anomeric centres and is therefore non-reducing. Maltose is another disaccharide but retains a free reducing end. Cellulose is a structural polysaccharide consisting of glucose-derived residues connected through β-(1→4) glycosidic linkages. It does not possess the ordinary sweetness associated with many simple sugars. Therefore, neither sweetness nor reducing character is a universal condition for carbohydrate classification. Two substances can both be carbohydrates while exhibiting different reducing behaviour. Likewise, a substance can be a carbohydrate without being sweet. The investigator's proposed equivalence therefore confuses three different kinds of chemical or sensory information. The correct conclusion distinguishes molecular classification from individual physical and chemical properties.
565. Two ordinary disaccharides P and Q each contain one glycosidic linkage.
P is sucrose, in which both anomeric centres participate in the glycosidic linkage.
Q is maltose, in which only one anomeric centre participates in the inter-residue linkage; the other remains free.
Both disaccharides are completely hydrolysed to their constituent monosaccharides.
Every resulting monosaccharide has its ordinary free anomeric centre available.
Which statement correctly compares the changes in the numbers of free anomeric centres per original disaccharide molecule?
ⓐ. P changes from zero to one, whereas Q changes from one to two.
ⓑ. P changes from one to two, whereas Q changes from zero to two.
ⓒ. P changes from zero to two, whereas Q changes from one to two.
ⓓ. Both change from zero to two because every glycosidic linkage necessarily consumes both anomeric centres.
Correct Answer: P changes from zero to two, whereas Q changes from one to two.
Explanation: Sucrose contains glucose and fructose joined through their respective anomeric centres. Consequently, neither of those centres is available as a free hemiacetal or hemiketal in intact sucrose. The initial number of free anomeric centres in P is therefore zero. Complete hydrolysis breaks its glycosidic linkage and releases free glucose and fructose. Each liberated monosaccharide has an available anomeric centre, so the final count is two. Maltose differs because only one glucose anomeric centre is involved in its α-(1→4) glycosidic linkage. The second glucose unit retains its free hemiacetal centre, making intact maltose reducing. Its initial count of free anomeric centres is therefore one. Complete hydrolysis releases two free glucose molecules. Both resulting molecules have available anomeric centres, giving a final count of two. The increase is consequently two for sucrose but only one for maltose. This difference follows from glycosidic connectivity rather than from the number of monosaccharide units released. The comparison explains why two disaccharides can produce two monosaccharides each yet differ in reducing behaviour before hydrolysis.
566. An ordinary linear polypeptide is subjected to two selective chemical modifications.
The peptide contains an internal serine residue and an internal cysteine residue.
Treatment I converts the serine side-chain alcoholic hydroxyl group into a stable ether without changing the peptide backbone.
Treatment II, applied separately, oxidises a pair of available cysteine thiol groups into a disulphide linkage.
The peptide's original sequence and all backbone peptide bonds remain intact throughout.
An investigator argues that any change in a side-chain covalent bond must necessarily change the protein's primary amino acid sequence.
Which conclusion is most appropriate?
ⓐ. The investigator is correct because every side-chain oxygen or sulphur atom belongs to a peptide bond.
ⓑ. The investigator is correct only for disulphide formation because every sulphur–sulphur bond changes the order of peptide residues.
ⓒ. Neither treatment can influence protein conformation because side-chain functional groups are unrelated to higher-order structural interactions.
ⓓ. Both treatments can change side-chain chemistry without changing the original residue order; such changes may nevertheless affect interactions involved in higher-order protein structure.
Correct Answer: Both treatments can change side-chain chemistry without changing the original residue order; such changes may nevertheless affect interactions involved in higher-order protein structure.
Explanation: The primary structure of a polypeptide is the ordered sequence of its amino acid residues. The covalent peptide backbone establishes the connectivity of those residues. Serine contains an alcoholic hydroxyl group in its side chain. The specified ether-forming reaction changes that side-chain functional group but does not break or rearrange the peptide backbone. Cysteine contains a thiol group capable of forming a disulphide linkage through suitable oxidation. Such a linkage may contribute to the stability of a protein's three-dimensional structure. Its formation does not necessarily change the original order of amino acid residues along either participating chain. Therefore, neither treatment requires a change in the original primary sequence. However, side-chain modifications can affect chemical interactions such as hydrogen bonding or covalent cross-linking. These interactions may influence higher-order folding and biological activity. The investigator incorrectly treats every covalent chemical change within a protein as equivalent to changing its amino acid sequence. The correct interpretation separates backbone sequence from side-chain chemical state and conformational stabilisation.
567. Three ordinary polysaccharide preparations P, Q and R all yield D-glucose on complete hydrolysis.
P consists mainly of essentially unbranched α-(1→4)-linked glucose chains.
Q consists of highly branched chains containing α-(1→4) segments and α-(1→6) branch points.
R consists of extended β-(1→4)-linked glucose chains associated with structural material in plants.
A selective reagent hydrolyses α-(1→6) linkages while preserving α-(1→4) and β-(1→4) linkages.
Which inference is most defensible?
ⓐ. Only Q contains the specified branch-linkage target; identical complete hydrolysis products cannot establish identical polymer architecture or biological function.
ⓑ. P and R must have identical structures because they contain the same repeating glucose formula.
ⓒ. R must possess more α-(1→6) branch points than Q because it serves a structural function.
ⓓ. All three must be equally susceptible to the reagent because every glucose polymer contains the same anomeric configuration.
Correct Answer: Only Q contains the specified branch-linkage target; identical complete hydrolysis products cannot establish identical polymer architecture or biological function.
Explanation: P is consistent with amylose, the essentially unbranched component of starch. Its ordinary backbone contains α-(1→4) glycosidic linkages. Q resembles glycogen, which is highly branched and contains both α-(1→4) segments and α-(1→6) branch-forming connections. R resembles cellulose, a structural polysaccharide containing β-(1→4) glycosidic linkages. The selective reagent specifically recognises α-(1→6) connections. Therefore, Q contains the stated reaction targets, whereas the described structures of P and R do not. All three polysaccharides can yield glucose after sufficiently complete hydrolysis because each is made from glucose-derived units. Nevertheless, the hydrolysis products do not reveal whether the original chains were branched or unbranched. They also do not independently reveal the alpha or beta configuration of the glycosidic linkages. These structural differences help distinguish storage polysaccharides from the structural role of cellulose. The experiment therefore illustrates why constituent identity and polymer architecture are separate kinds of chemical information. The correct prediction requires identifying the particular linkages targeted by the reagent.
568. A biological preparation contains DNA, a globular protein enzyme and a water-soluble vitamin.
Treatment P separates complementary DNA strands without cleaving their phosphodiester backbones.
Treatment Q disturbs the enzyme's native conformation without hydrolysing its peptide backbone.
Treatment R decreases the available amount of the vitamin without directly reacting with the DNA or protein.
After the treatments, the investigator observes changes in the preparation's overall biological activity.
Consider the following statements.
Statement I: Treatment P can preserve the original nucleotide sequences within the separated DNA strands.
Statement II: Treatment Q may reduce catalytic activity without destroying the enzyme's primary amino acid sequence.
Statement III: Treatment R can affect biological functioning even though the vitamin is not itself a repeating-unit polymer.
Statement IV: The observed changes prove that all three treatments hydrolyse the same type of covalent bond.
Statement V: The three treatments illustrate different relationships between chemical constitution and biological function.
Which statements are correct?
ⓐ. I, II, III and IV only
ⓑ. I, II, III and V only
ⓒ. II, III, IV and V only
ⓓ. I, III, IV and V only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because complementary DNA strands are associated through hydrogen bonds between their nitrogenous bases. Separating those strands without breaking the phosphodiester backbones can preserve the ordered nucleotide sequence within each chain. Statement II is correct because a globular protein enzyme requires a suitable native conformation for effective catalytic activity. Disruption of secondary or tertiary interactions may reduce activity without complete peptide-bond hydrolysis. The enzyme's original primary sequence can therefore remain intact. Statement III is correct because vitamins are biologically important substances required in relatively small quantities. They are not defined as repeating-unit polymers, yet inadequate availability can affect normal functioning. Statement IV is incorrect because the treatments involve different kinds of changes. DNA strand separation and protein unfolding may involve disruption of non-covalent interactions, while the vitamin treatment concerns availability rather than covalent backbone hydrolysis. Statement V is correct because the three cases connect biological function with different aspects of molecular structure and chemical supply. Their biological consequences do not establish identical molecular mechanisms. The correct interpretation therefore distinguishes information storage, catalytic conformation and nutritional requirements rather than assuming that every functional disturbance results from cleavage of a polymer backbone.
569. Free D-glucose and its fully acetylated derivative are examined through the following observations:
Observation I: Free glucose can react with hydroxylamine to form an oxime under suitable conditions.
Observation II: Glucose pentaacetate does not undergo the corresponding reaction with hydroxylamine under conditions that leave the derivative intact.
Observation III: Free glucose exists predominantly in cyclic forms in aqueous solution but can still exhibit reducing behaviour.
Which interpretation is consistent with all three observations?
ⓐ. Glucose contains a permanently free aldehydic group in every molecular form, including its intact pentaacetate.
ⓑ. Glucose pentaacetate cannot form an oxime because acetylation removes all six carbon atoms from the glucose skeleton.
ⓒ. Free glucose can access an open-chain carbonyl form through reversible ring opening, whereas its intact pentaacetate lacks the corresponding freely accessible carbonyl functionality.
ⓓ. The inability of glucose pentaacetate to form an oxime proves that free glucose is a ketose rather than an aldose.
Correct Answer: Free glucose can access an open-chain carbonyl form through reversible ring opening, whereas its intact pentaacetate lacks the corresponding freely accessible carbonyl functionality.
Explanation: \(\textbf{Evidence from oxime formation:}\)
Hydroxylamine reacts with an accessible aldehydic or ketonic carbonyl group to form an oxime. Free glucose can undergo this reaction because an open-chain form containing an aldehydic group is available under suitable reaction conditions.
The reaction provides evidence for carbonyl functionality but does not imply that every glucose molecule remains permanently open-chain.
\(\textbf{Cyclic structure of glucose:}\)
In aqueous solution, glucose exists predominantly as cyclic hemiacetal forms.
These structures arise through intramolecular addition involving the C1 aldehydic group and a hydroxyl group of the same molecule.
The cyclic hemiacetal can undergo reversible ring opening, regenerating an open-chain aldehydic form.
This equilibrium explains how predominantly cyclic glucose can retain reducing behaviour.
\(\textbf{Interpretation of pentaacetate behaviour:}\)
Acetylation of glucose produces glucose pentaacetate, in which five hydroxyl groups are acetylated.
In the intact cyclic pentaacetate, the anomeric hydroxyl group has been converted into an acetate-containing acetal centre. The ordinary free-hemiacetal ring-opening pathway is therefore unavailable without cleavage of the relevant linkage.
Consequently, the intact derivative does not provide the freely accessible aldehydic carbonyl required for the usual oxime-forming reaction.
\(\textbf{Combined structural inference:}\)
The contrasting observations do not contradict glucose's classification as an aldohexose.
Instead, they show that the chemical behaviour of a carbohydrate depends on whether its carbonyl-containing open-chain form remains accessible.
Free glucose can interconvert between cyclic and open-chain forms, whereas the protected pentaacetate does not exhibit the same ordinary carbonyl reactivity under the specified conditions.
570. Two carbohydrate feedstocks are processed separately.
| Feedstock | Treatment |
| P | Pure sucrose is boiled with dilute mineral acid under suitable hydrolysis conditions. |
| Q | Pure starch is hydrolysed using dilute sulphuric acid at approximately 393 K under pressure. |
Both treatments proceed to complete hydrolysis.
The monosaccharides are recovered without further chemical transformation.
A selective analytical procedure subsequently identifies whether the hydrolysate contains an initially ketonic monosaccharide.
Which prediction is correct?
ⓐ. Both hydrolysates contain only glucose because acid hydrolysis converts every ketose into an aldose.
ⓑ. P produces glucose and fructose, whereas Q produces glucose; the ketose-identification procedure can distinguish their product compositions.
ⓒ. P produces glucose and galactose, whereas Q produces fructose; both hydrolysates contain equal amounts of ketoses.
ⓓ. P produces only fructose, whereas Q produces glucose and fructose because starch contains two different monosaccharide units.
Correct Answer: P produces glucose and fructose, whereas Q produces glucose; the ketose-identification procedure can distinguish their product compositions.
Explanation: Sucrose is a disaccharide composed of glucose and fructose units. Complete hydrolysis breaks its glycosidic linkage and releases one molecule of each monosaccharide per original sucrose molecule. Therefore, P contains glucose and fructose after the stated treatment. Glucose is an aldohexose, whereas fructose is a ketohexose. Starch is different because it is a polysaccharide composed of α-D-glucose-derived units. Complete hydrolysis of its glycosidic linkages produces glucose rather than a glucose–fructose mixture. NCERT describes commercial preparation of glucose by hydrolysis of starch with dilute sulphuric acid at approximately 393 K under pressure. Therefore, Q contains glucose as its monosaccharide product under the specified conditions. The two hydrolysates differ in their constituent monosaccharide identities even though both treatments involve acid hydrolysis. A procedure capable of identifying an initially ketonic monosaccharide can distinguish the fructose-containing product from the glucose-only product. This does not imply that glucose and fructose have different molecular formulas. Their distinction lies in the position and nature of the carbonyl group in their open-chain structures.
571. The open-chain structures of D-glucose and D-fructose are modified independently before cyclisation.
P is D-glucose, containing an aldehydic group at C1 and an alcoholic hydroxyl group at C5.
Q is D-fructose, containing a ketonic group at C2 and an alcoholic hydroxyl group at C5.
A hypothetical selective reagent temporarily blocks only the C5 hydroxyl group in each molecule without changing its carbonyl group, carbon skeleton or other hydroxyl groups.
The reagent does not introduce a new intramolecular nucleophile.
Consider only the characteristic glucose pyranose and fructose furanose cyclisations described in NCERT.
Which consequence follows most directly?
ⓐ. Blocking C5 prevents the specified C5-to-carbonyl cyclisation in both molecules, while their original aldehydic and ketonic classifications remain unchanged.
ⓑ. Blocking C5 converts glucose into a ketose and fructose into an aldose because the carbonyl groups exchange positions.
ⓒ. Only glucose cyclisation is affected because formation of fructofuranose requires participation of the C1 hydroxyl rather than C5.
ⓓ. Both molecules become disaccharides because blocking an alcoholic hydroxyl group necessarily forms an inter-residue glycosidic linkage.
Correct Answer: Blocking C5 prevents the specified C5-to-carbonyl cyclisation in both molecules, while their original aldehydic and ketonic classifications remain unchanged.
Explanation: The characteristic cyclic structure of glucose described in NCERT forms by intramolecular addition of the C5 hydroxyl group to the aldehydic carbon at C1. This produces a six-membered cyclic hemiacetal structure called glucopyranose. Fructose undergoes a related but chemically distinct transformation. Its C5 hydroxyl group adds to the ketonic carbon at C2, producing the five-membered hemiketal structure called fructofuranose. Therefore, the same hydroxyl position participates in the two specified cyclisation reactions, although the carbonyl positions differ. The hypothetical reagent blocks that C5 hydroxyl group in both molecules. Under the stated restriction that no alternative nucleophile is introduced, the described C5-to-carbonyl cyclisations cannot proceed while the blocking group remains. However, blocking an alcoholic hydroxyl does not convert an aldehyde into a ketone or move a carbonyl group from one carbon atom to another. Glucose consequently retains its original aldose constitution, and fructose retains its ketose constitution. Nor does intramolecular hydroxyl protection by itself establish formation of a disaccharide. The correct answer connects the positions of the reacting functional groups with the ring structures formed from them.
572. A carbohydrate-containing biological preparation is separated into three fractions.
P contains glucose molecules readily available for energy production.
Q contains a carbohydrate associated with proteins in a biological system.
R contains a plant-derived material used industrially for producing paper and textile fibres.
Complete chemical examination establishes that Q contains both carbohydrate-derived and protein-derived constituents, while R contains predominantly a β-(1→4)-linked glucose polymer.
Consider the following statements.
Statement I: P is consistent with glucose functioning as an immediate energy source.
Statement II: Q demonstrates that carbohydrates can occur in association with proteins rather than exclusively as isolated saccharides.
Statement III: R is consistent with cellulose and illustrates a structural and industrial role of carbohydrates.
Statement IV: Every carbohydrate must perform only an energy-storage function because glucose provides energy.
Statement V: The biological or industrial role of a carbohydrate cannot always be inferred merely from its constituent elements.
Which statements are correct?
ⓐ. I, II and IV only
ⓑ. II, III, IV and V only
ⓒ. I, III and V only
ⓓ. I, II, III and V only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because glucose is an important readily available energy source in living organisms. NCERT identifies glucose as a major source of energy for mammals and discusses the importance of carbohydrates in food. Statement II is correct because carbohydrates also occur in biological systems in combination with proteins and lipids. Their occurrence is therefore not limited to pure, isolated monosaccharides or polysaccharides. Statement III is correct because cellulose is a structural polysaccharide composed of β-linked glucose units. Cellulose is an important constituent of plant cell walls and is used in materials such as cotton and wood. It also provides raw material for industries including textiles and paper. Statement IV is incorrect because carbohydrates perform several functions beyond energy storage. Glucose supplies energy, starch and glycogen act as reserves, and cellulose contributes structural support. Statement V is correct because molecules containing similar elements may differ substantially in connectivity, molecular organisation and function. The chemical identity of a constituent monosaccharide alone does not determine every property of the material formed from it. The correct combination recognises the diversity of carbohydrate functions while preserving their chemical basis.
573. A branched glucose polysaccharide is represented as one connected molecular structure.
The molecule contains a main α-(1→4)-linked glucose chain.
Three separate side chains are attached to the main chain through three α-(1→6) branch-forming glycosidic linkages.
No side chain contains another branch.
A selective reagent hydrolyses all three α-(1→6) linkages but leaves every α-(1→4) linkage intact.
Assume that no other bond is cleaved and that all products remain ordinary non-cyclic carbohydrate chains.
Which statement correctly gives the number of connected carbohydrate fragments after treatment and the corresponding structural interpretation?
ⓐ. Three fragments; the main chain disappears because every α-(1→6) cleavage destroys an α-(1→4) linkage.
ⓑ. Four fragments; the main chain and three detached side chains remain, illustrating selective removal of branch connections.
ⓒ. Four fragments; every glucose residue becomes a free monosaccharide because α-(1→4) bonds cannot survive branch cleavage.
ⓓ. Five fragments; each branch-forming linkage produces two independent new chains in addition to the original main chain.
Correct Answer: Four fragments; the main chain and three detached side chains remain, illustrating selective removal of branch connections.
Explanation: The starting polysaccharide is described as one connected molecule containing a main chain and three side chains. Each side chain is connected to the main chain through one α-(1→6) glycosidic linkage. Therefore, the structure contains three specified branch-forming connections. The reagent is selective for those connections and does not hydrolyse α-(1→4) linkages. Cleaving the first branch connection separates one side chain from the remaining connected structure. Cleaving the second and third connections similarly detaches the other two side chains. After all three linkages have been hydrolysed, the main α-(1→4) chain remains intact. Each detached side chain also retains its internal α-(1→4) linkages. The final preparation therefore contains the original main chain and three separate side chains. This produces four connected carbohydrate fragments altogether. Complete liberation of glucose is not justified because the remaining inter-residue connections have not been cleaved. The experiment distinguishes debranching from complete depolymerisation and shows why enzyme selectivity must be applied to the actual pattern of glycosidic connectivity.
574. Two peptide-containing samples P and Q have the following characteristics:
| Sample | Characteristic |
| P | An ordinary polypeptide with 120 amino acid residues and molecular mass above \(10{,}000\ \mathrm{u}\) |
| Q | Insulin, containing 51 amino acid residues and possessing a well-defined functional protein conformation |
A student asserts that Q cannot be regarded as a protein because it has fewer than 100 amino acid residues, whereas P satisfies the usual numerical description.
Which statement is most appropriate?
ⓐ. The assertion is correct because protein classification is determined exclusively by an invariant minimum of 100 residues.
ⓑ. Neither P nor Q can be a protein because every protein must contain exactly 51 amino acid residues.
ⓒ. P meets the usual numerical definition; Q illustrates that shorter biologically functional polypeptides can also be proteins.
ⓓ. Q can be regarded as a protein only if its peptide bonds are completely hydrolysed into free amino acids.
Correct Answer: P meets the usual numerical definition; Q illustrates that shorter biologically functional polypeptides can also be proteins.
Explanation: Proteins are polymers of alpha-amino acids connected through peptide bonds. NCERT describes a polypeptide with more than 100 amino acid residues and molecular mass greater than approximately 10,000 u as a protein in the usual numerical description. P satisfies both of these stated conditions. However, NCERT also cautions that the distinction between a polypeptide and a protein is not perfectly sharp. A shorter polypeptide may still be called a protein when it possesses a characteristic, well-defined protein conformation. Insulin is given as a specific example of this qualification. It contains 51 amino acid residues but is nevertheless recognised as a protein hormone. Therefore, Q cannot be excluded from the protein category merely because its residue count is below the usual numerical threshold. The peptide bonds within insulin are part of its protein constitution, not something that must be destroyed before classification. Complete hydrolysis would instead remove the original peptide connectivity. The correct interpretation combines the general numerical description with its explicit NCERT exception rather than treating a useful guideline as an absolute chemical definition.
575. Two samples contain optically inactive amino acid material.
P consists entirely of glycine.
Q consists of equal molar amounts of D-alanine and L-alanine.
Both preparations have zero observed net optical rotation under the specified conditions.
The samples are then subjected to a treatment that selectively separates the D- and L-forms of alanine without changing their configurations.
The treatment has no effect on the chemical constitution of glycine.
Which conclusion is correct?
ⓐ. P is achiral; Q is an optically compensating alanine racemate that can yield optically active separated fractions.
ⓑ. Both P and Q are optically inactive because neither contains any asymmetric carbon.
ⓒ. P must yield D- and L-glycine fractions because all alpha-amino acids possess enantiomers.
ⓓ. Q becomes optically active only if the alanine carbon skeleton is converted into that of valine.
Correct Answer: P is achiral; Q is an optically compensating alanine racemate that can yield optically active separated fractions.
Explanation: Optical inactivity can arise for different structural reasons. Glycine contains hydrogen as its side chain. Its alpha carbon consequently possesses two identical hydrogen substituents and is not asymmetric. Therefore, glycine is achiral and does not have ordinary D- and L-enantiomers arising from its alpha carbon. Alanine, by contrast, contains an asymmetric alpha carbon. It can exist in D- and L-configurational forms that are enantiomers. Under identical conditions, enantiomers rotate plane-polarised light through equal angles in opposite directions. Q contains equal molar amounts of these forms, so their observed rotations cancel. The optical inactivity of Q therefore arises from enantiomeric compensation rather than from absence of molecular chirality. A treatment that separates the alanine enantiomers can produce fractions with nonzero rotations. No corresponding separation into D- and L-glycine is possible from the specified achiral glycine sample. The treatment also need not change alanine into another amino acid. The correct interpretation distinguishes molecular achirality from the optical inactivity of an equal-enantiomer mixture.
576. A protein's regular secondary structure is examined before and after a selective chemical change.
The native protein contains a right-handed alpha-helical region stabilised through hydrogen bonds involving peptide-backbone carbonyl and N–H groups.
One serine side-chain hydroxyl group within this region is converted into a stable ether.
No backbone peptide bond or peptide-backbone N–H or carbonyl group is modified.
The researcher predicts that the alpha-helix must disappear because an alcoholic hydroxyl group has been modified.
Which conclusion is best supported by the specified molecular information?
ⓐ. The alpha-helix must disappear because every hydrogen bond in an alpha-helix is formed exclusively between serine side-chain hydroxyl groups.
ⓑ. The change necessarily reverses the helix from right-handed to left-handed because ether formation reverses every alpha-carbon configuration.
ⓒ. The primary amino acid sequence must change because any reaction involving a protein side chain breaks the peptide backbone.
ⓓ. The stated modification does not directly remove the backbone groups responsible for the characteristic alpha-helical hydrogen bonds; any subsequent conformational effect requires additional structural evidence.
Correct Answer: The stated modification does not directly remove the backbone groups responsible for the characteristic alpha-helical hydrogen bonds; any subsequent conformational effect requires additional structural evidence.
Explanation: NCERT describes the alpha-helix as a common secondary structure of proteins. The ordinary alpha-helix is right-handed and is stabilised by hydrogen bonding between peptide-backbone carbonyl and N–H groups. These functional groups belong to the main polypeptide backbone rather than specifically to serine side chains. The stated reaction modifies one alcoholic hydroxyl group belonging to a serine side chain. It does not directly modify the peptide-backbone carbonyl or N–H groups responsible for the described helical hydrogen bonds. Therefore, destruction of the alpha-helix cannot be concluded solely from loss of that particular side-chain hydroxyl group. Side-chain changes may influence local interactions and consequently affect folding under some conditions. However, a definite conformational outcome would require additional structural information. The question also states that the backbone peptide bonds remain intact. Thus, the amino acid sequence is preserved, and no conversion into a different primary sequence is established. Nor does ether formation automatically reverse the helix's handedness. The correct inference distinguishes the directly modified group from the groups responsible for the characteristic secondary-structure interaction.
577. A researcher compares three glucose-containing biological reserves.
| Preparation | Characteristic |
| P | A branched α-glucose polymer from plant storage tissue |
| Q | A highly branched glucose reserve from animal liver |
| R | A linear β-glucose polymer from plant cell-wall material |
The researcher wishes to predict which preparation has an architecture described by NCERT as more highly branched than amylopectin, and which preparation primarily serves a structural rather than storage role.
Complete hydrolysis of all three preparations produces glucose.
Which conclusion is correct?
ⓐ. P is glycogen, Q is cellulose and R is amylopectin; Q is the most highly branched.
ⓑ. P is amylopectin, Q is glycogen and R is cellulose; Q is more highly branched than P, while R performs a structural role.
ⓒ. P is cellulose, Q is amylose and R is glycogen; all three possess identical β-(1→4) linkages.
ⓓ. P is amylose, Q is cellulose and R is glycogen; R has the most highly branched architecture.
Correct Answer: P is amylopectin, Q is glycogen and R is cellulose; Q is more highly branched than P, while R performs a structural role.
Explanation: Amylopectin is the branched component of plant starch. Its main glucose chains contain α-(1→4) linkages, while branches arise through α-(1→6) connections. Therefore, P is consistent with amylopectin. Glycogen is the principal storage polysaccharide in animals and is present in tissues including the liver. NCERT describes glycogen as structurally similar to amylopectin but more highly branched. Consequently, Q is glycogen and possesses the greater branching described in the question. Cellulose consists of β-D-glucose units connected through β-(1→4) linkages. It forms an important structural component of plant cell walls, identifying R. All three polymers yield glucose on complete hydrolysis because their constituent monosaccharide units are glucose-derived. However, their linkage configurations and branching patterns differ. Therefore, identical complete hydrolysis products do not establish identical polymer architecture. Their biological roles also differ, with P and Q acting as storage materials and R providing structural support. The correct conclusion requires connecting organism, function, glycosidic structure and relative branching.
578. A clinical chemistry discussion considers two hormone-related observations.
Observation P: The adrenal cortex is functioning inadequately, and the affected person shows hypoglycaemia, weakness and increased susceptibility to stress.
Observation Q: A hormone preparation regulates water and salt excretion by the kidneys but is not described as a polypeptide enzyme.
The discussion is restricted to the general hormonal relationships described in NCERT.
Which statement correctly interprets the observations?
ⓐ. P is consistent with hyperthyroidism, while Q must be insulin because insulin is the principal mineralocorticoid.
ⓑ. P indicates increased adrenal cortical activity, while Q indicates glucocorticoids controlling renal salt excretion.
ⓒ. P indicates Addison's disease due to inadequate adrenal cortical function; Q indicates mineralocorticoid action, distinct from glucocorticoid action.
ⓓ. P indicates thyroid iodine deficiency, while Q represents insulin regulation of renal salt excretion.
Correct Answer: P indicates Addison's disease due to inadequate adrenal cortical function; Q indicates mineralocorticoid action, distinct from glucocorticoid action.
Explanation: The adrenal cortex produces important steroid hormones, including glucocorticoids and mineralocorticoids. NCERT explains that glucocorticoids regulate carbohydrate metabolism, influence inflammatory reactions and participate in responses to stress. Mineralocorticoids are involved in controlling the excretion of water and salts by the kidneys. Therefore, Q is consistent with the action of mineralocorticoids. Inadequate adrenal cortical function can produce Addison's disease. NCERT associates this condition with hypoglycaemia, weakness and increased susceptibility to stress. Consequently, the observations in P are consistent with the described condition. Hypoglycaemia represents abnormally low blood glucose and should not be confused with the elevated glucose response normally corrected by insulin. Mineralocorticoids are steroid hormones rather than ordinary protein enzymes. Likewise, glucocorticoids are not nucleic acids. The clinical observations illustrate consequences of impaired chemical coordination by hormones. The correct interpretation distinguishes the related but different regulatory functions of the adrenal cortical hormone classes without requiring detailed endocrine pathways outside the stated NCERT treatment.
579. Two nucleotide-containing samples P and Q are obtained after selective cleavage of nucleic acids.
P contains adenine, 2-deoxyribose and phosphate.
Q contains uracil, ribose and phosphate.
A chemical treatment removes the phosphate component from each sample without breaking the corresponding base–sugar linkage.
A second treatment hydrolyses the base–sugar linkage of the resulting compounds.
No other chemical transformations occur.
Which statement correctly identifies the products after both stages?
ⓐ. P first forms deoxyadenosine and then adenine plus 2-deoxyribose; Q first forms uridine and then uracil plus ribose.
ⓑ. P first forms adenosine and then adenine plus ribose; Q first forms thymidine and then thymine plus 2-deoxyribose.
ⓒ. P first forms deoxyguanosine and then guanine plus ribose; Q first forms uridine and then uracil plus 2-deoxyribose.
ⓓ. Both first form identical nucleosides because phosphate removal makes the pentose and nitrogenous bases chemically indistinguishable.
Correct Answer: P first forms deoxyadenosine and then adenine plus 2-deoxyribose; Q first forms uridine and then uracil plus ribose.
Explanation: A nucleotide consists of a nitrogenous base, a pentose sugar and a phosphate component. Removing the phosphate component while preserving the base–sugar bond produces a nucleoside. P contains adenine attached to 2-deoxyribose. Its corresponding nucleoside is therefore deoxyadenosine. Subsequent hydrolysis of the base–sugar linkage releases adenine and 2-deoxyribose. Q contains uracil attached to ribose. Removing phosphate from this nucleotide produces uridine. Hydrolysis of uridine's base–sugar linkage releases uracil and ribose. The different products reflect the original nitrogenous bases and pentose sugars. Phosphate removal does not transform adenine into guanine or uracil into thymine. It also does not convert ribose into 2-deoxyribose or vice versa. The two stages involve cleavage of different covalent connections. Therefore, the correct identification requires preserving constituent identities while distinguishing nucleotides, nucleosides and the separately liberated bases and sugars.
580. A purified enzyme E is tested using the same substrate concentration at three different pH values. All experiments are performed at the same temperature, and identical quantities of active enzyme are initially added.
| Preparation | pH | Initial reaction rate (arbitrary units) |
| P | 5 | 12 |
| Q | 7 | 48 |
| R | 9 | 15 |
| S (without enzyme) | 7 | 3 |
The reaction products are chemically identical in all preparations.
Which conclusion is justified by the observations?
ⓐ. E has its experimentally highest activity at pH 5, and the lower rate at pH 7 proves complete denaturation.
ⓑ. E changes the chemical identity of the reaction products at pH 7 because the reaction rate is higher.
ⓒ. The lower rates at pH 5 and pH 9 prove that all peptide bonds in E have been hydrolysed.
ⓓ. E shows its highest measured activity at pH 7, and its catalytic effectiveness varies with pH without requiring a change in product identity.
Correct Answer: E shows its highest measured activity at pH 7, and its catalytic effectiveness varies with pH without requiring a change in product identity.
Explanation: \(\textbf{Comparison of enzyme activities:}\)
The same enzyme and substrate are examined under different pH conditions. The measured initial reaction rates are:
\[
v_{\mathrm{pH}\,5}=12
\]
\[
v_{\mathrm{pH}\,7}=48
\]
\[
v_{\mathrm{pH}\,9}=15
\]
The highest measured rate is obtained at pH 7.
Therefore, pH 7 provides the most favourable catalytic condition among the three pH values tested. The experiment does not establish the exact optimum pH between the tested values.
\(\textbf{Evidence of catalytic action:}\)
At pH 7, the reaction rate with enzyme E is 48 arbitrary units, whereas the corresponding preparation without enzyme has a rate of 3 arbitrary units.
The observed rate enhancement is:
\[
\frac{48}{3}=16
\]
Thus, under the specified conditions, the enzyme-containing preparation exhibits a sixteenfold higher initial rate than the preparation without enzyme.
\(\textbf{Effect of pH on enzyme activity:}\)
The ionisation states of suitable functional groups and the interactions maintaining an enzyme's active conformation can depend on pH. Consequently, changing pH may alter catalytic activity.
However, a reduced reaction rate alone does not establish that peptide bonds have been hydrolysed or that irreversible denaturation has occurred.
\(\textbf{Chemical interpretation:}\)
The question specifies that the same chemical products are formed in all preparations. The different rates therefore reflect changes in catalytic effectiveness rather than a necessary change in product identity.
The results establish substantial enzyme activity at pH 7, reduced measured activity at pH 5 and pH 9, and a clear catalytic effect relative to the enzyme-free control.
581. A nucleic acid researcher hydrolyses two different samples completely into their constituent bases.
| Sample | Base composition |
| P | Adenine and thymine occur in equal quantities; guanine and cytosine also occur in equal quantities. |
| Q | Adenine and uracil occur in unequal quantities; guanine and cytosine also occur in unequal quantities. |
Independent structural examination identifies P as an ordinary double-stranded DNA molecule and Q as an ordinary single-stranded RNA molecule.
A student concludes that the unequal individual base quantities in Q prove that RNA cannot contain any complementary base pairs within its own folded structure.
Which inference is correct?
ⓐ. The student's conclusion is correct because local complementary pairing is impossible unless the entire RNA molecule contains equal quantities of every complementary base.
ⓑ. P is consistent with complete DNA complementarity, while Q's unequal bulk base quantities do not exclude the possibility of local intrachain complementary regions.
ⓒ. Q must be double-stranded DNA because unequal A–U and G–C quantities can occur only in DNA.
ⓓ. P cannot be DNA because ordinary DNA contains uracil rather than thymine.
Correct Answer: P is consistent with complete DNA complementarity, while Q's unequal bulk base quantities do not exclude the possibility of local intrachain complementary regions.
Explanation: Ordinary double-stranded DNA contains two complementary polynucleotide strands. Adenine pairs with thymine, while guanine pairs with cytosine. Therefore, a fully complementary DNA molecule contains equal amounts of adenine and thymine and equal amounts of guanine and cytosine. P is consistent with these relationships. RNA differs from DNA in its pentose sugar and characteristic pyrimidine base. Ordinary RNA contains ribose and uracil instead of 2-deoxyribose and thymine. It is generally single-stranded in the NCERT description. Therefore, complete hydrolysis of an RNA molecule need not produce equal amounts of individually complementary bases. However, unequal bulk base quantities do not rule out local complementary arrangements within a single folded RNA chain. Suitable regions can still associate through A–U and G–C base pairing. The student incorrectly treats a condition associated with complete double-strand complementarity as a requirement for every local paired region. The correct interpretation distinguishes total base composition from the presence or absence of particular complementary sequence segments.
582. A protein sample contains two ordinary linear polypeptide chains P and Q.
P contains 35 amino acid residues, while Q contains 25 residues.
The two chains are associated through non-covalent interactions and have no interchain disulphide linkage.
A selective treatment separates them without cleaving peptide bonds.
Subsequently, each chain undergoes complete peptide-bond hydrolysis.
Assume that every hydrolysis consumes one water molecule per peptide bond.
Take the molar mass of water as \(18\ \mathrm{g\,mol^{-1}}\).
How many moles of water are consumed when one mole of the original two-chain protein assembly undergoes complete peptide-bond hydrolysis, and what is the corresponding mass of water?
ⓐ. \(60\ \mathrm{mol}\) and \(1080\ \mathrm{g}\)
ⓑ. \(59\ \mathrm{mol}\) and \(1062\ \mathrm{g}\)
ⓒ. \(58\ \mathrm{mol}\) and \(1044\ \mathrm{g}\)
ⓓ. \(57\ \mathrm{mol}\) and \(1026\ \mathrm{g}\)
Correct Answer: \(58\ \mathrm{mol}\) and \(1044\ \mathrm{g}\)
Explanation: \(\textbf{Peptide bonds in chain P:}\)
An ordinary linear chain containing \(n\) amino acid residues contains \(n-1\) peptide bonds.
For P:
\[
N_{\mathrm{bonds,P}}=35-1
\]
\[
N_{\mathrm{bonds,P}}=34
\]
\(\textbf{Peptide bonds in chain Q:}\)
\[
N_{\mathrm{bonds,Q}}=25-1
\]
\[
N_{\mathrm{bonds,Q}}=24
\]
\(\textbf{Total peptide-bond count:}\)
The subunits are associated through non-covalent interactions, so separation does not consume hydrolytic water or introduce additional peptide bonds.
\[
N_{\mathrm{bonds,total}}=34+24
\]
\[
N_{\mathrm{bonds,total}}=58
\]
\(\textbf{Water requirement:}\)
Complete hydrolysis consumes one water molecule for each peptide bond broken.
For one mole of the original two-chain assembly:
\[
n_{\mathrm{water}}=58\ \mathrm{mol}
\]
\(\textbf{Corresponding mass:}\)
\[
m_{\mathrm{water}}=nM
\]
\[
m_{\mathrm{water}}=58(18)
\]
\[
m_{\mathrm{water}}=1044\ \mathrm{g}
\]
\(\textbf{Consistency check:}\)
The assembly contains 60 amino acid residues distributed over two independent linear chains.
Its total peptide-bond count is therefore:
\[
N_{\mathrm{bonds}}=60-2=58
\]
This agrees with the separate chain calculations.
\(\textbf{Final answer:}\)
\[
\boxed{n_{\mathrm{water}}=58\ \mathrm{mol};\qquad m_{\mathrm{water}}=1044\ \mathrm{g}}
\]
583. An experiment compares the biological effects of three different chemical substances.
P is a digestive enzyme that hydrolyses maltose into glucose.
Q is a hormone released into the bloodstream in response to a rapid increase in blood glucose concentration.
R is a vitamin required in relatively small quantities for normal biological functioning.
The investigator proposes that P, Q and R should all be classified as enzymes because each contributes to normal carbohydrate-related physiology.
Which statement most appropriately evaluates the proposal?
ⓐ. P and Q are both enzymes because any molecule influencing blood glucose must catalyse maltose hydrolysis.
ⓑ. Q and R are both enzymes because hormones and vitamins contain the same active site as maltase.
ⓒ. P is a hormone because it changes substrate concentration, while Q is a carbohydrate because it regulates blood glucose.
ⓓ. P functions as a catalyst, Q as a chemical messenger and R as a required nutritional factor; their biological contributions do not make their chemical roles identical.
Correct Answer: P functions as a catalyst, Q as a chemical messenger and R as a required nutritional factor; their biological contributions do not make their chemical roles identical.
Explanation: Maltase is an enzyme that catalyses hydrolysis of maltose into glucose. Its defining chemical role in the experiment is acceleration of a particular substrate transformation. Therefore, P is an enzyme. A hormone is a chemical messenger produced by endocrine glands and transported through the bloodstream to its site of action. Insulin is released in response to a rapid rise in blood glucose concentration, making Q consistent with insulin. Its role in regulating blood glucose does not imply that it directly catalyses the hydrolysis of maltose. Vitamins are organic substances required in relatively small quantities for normal physiological functioning. Their significance arises from specific biological requirements rather than from one universal catalytic role. Therefore, R cannot be classified automatically as an enzyme merely because it contributes to normal functioning. Enzymes, hormones and vitamins can all be biologically important while differing in molecular constitution and mechanism of action. Some enzymes and hormones are proteins, but shared protein constitution does not make their functions identical. The correct evaluation distinguishes chemical catalysis, endocrine signalling and nutritional necessity.
584. A chemist prepares glucose pentaacetate by treating pure D-glucose with excess acetic anhydride.
The initial glucose amount is \(0.060\ \mathrm{mol}\).
All five hydroxyl groups of every glucose molecule undergo complete acetylation.
For each hydroxyl group acetylated, one molecule of acetic anhydride is consumed and one molecule of acetic acid is formed.
No side reaction occurs.
Take:
\[
M_{\mathrm{glucose}}=180\ \mathrm{g\,mol^{-1}}
\]
The net molar-mass increase for replacing one –OH group by –OCOCH₃ is \(42\ \mathrm{g\,mol^{-1}}\).
Which pair correctly gives the mass of glucose pentaacetate obtained and the amount of acetic acid formed?
ⓐ. \(23.4\ \mathrm{g}\) glucose pentaacetate and \(0.060\ \mathrm{mol}\) acetic acid
ⓑ. \(20.7\ \mathrm{g}\) glucose pentaacetate and \(0.300\ \mathrm{mol}\) acetic acid
ⓒ. \(23.4\ \mathrm{g}\) glucose pentaacetate and \(0.300\ \mathrm{mol}\) acetic acid
ⓓ. \(18.0\ \mathrm{g}\) glucose pentaacetate and \(0.360\ \mathrm{mol}\) acetic acid
Correct Answer: \(23.4\ \mathrm{g}\) glucose pentaacetate and \(0.300\ \mathrm{mol}\) acetic acid
Explanation: \(\textbf{Acetylatable hydroxyl groups:}\)
NCERT identifies five hydroxyl groups in glucose through the formation of glucose pentaacetate.
Complete acetylation modifies all five groups in each glucose molecule.
\[
N_{\mathrm{acetylations\ per\ glucose}}=5
\]
\(\textbf{Molar mass of the fully acetylated product:}\)
Each acetylation increases the molecular mass by \(42\ \mathrm{g\,mol^{-1}}\).
\[
M_{\mathrm{pentaacetate}}=M_{\mathrm{glucose}}+5(42)
\]
\[
M_{\mathrm{pentaacetate}}=180+210
\]
\[
M_{\mathrm{pentaacetate}}=390\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Mass obtained from the initial glucose:}\)
One mole of glucose yields one mole of glucose pentaacetate.
\[
n_{\mathrm{pentaacetate}}=0.060\ \mathrm{mol}
\]
\[
m_{\mathrm{pentaacetate}}=nM
\]
\[
m_{\mathrm{pentaacetate}}=0.060(390)
\]
\[
m_{\mathrm{pentaacetate}}=23.4\ \mathrm{g}
\]
\(\textbf{Acetic acid produced during acetylation:}\)
Each modified hydroxyl group produces one molecule of acetic acid under the specified conditions.
\[
n_{\mathrm{acetic\ acid}}=5n_{\mathrm{glucose}}
\]
\[
n_{\mathrm{acetic\ acid}}=5(0.060)
\]
\[
n_{\mathrm{acetic\ acid}}=0.300\ \mathrm{mol}
\]
\(\textbf{Chemical interpretation:}\)
The number of glucose-derived product molecules remains unchanged, but each receives five acetyl groups.
The acetic acid amount must therefore be calculated from the number of hydroxyl-group reactions rather than from the number of glucose molecules alone.
Formation of a stable pentaacetate also provides evidence for the presence of five hydroxyl groups in glucose.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{pentaacetate}}=23.4\ \mathrm{g};\quad n_{\mathrm{acetic\ acid}}=0.300\ \mathrm{mol}}
\]
585. Two preparations P and Q contain the same total number of glucose-derived residues.
P contains one ordinary linear glucose oligosaccharide consisting of eight residues joined through seven glycosidic linkages.
Q contains two separate ordinary linear glucose oligosaccharides, one with three residues and another with five residues.
Every chain has exactly one free reducing-end anomeric centre.
No structure contains a cyclic connection or a branch.
Both preparations are subjected to complete glycosidic-bond hydrolysis, consuming one water molecule per linkage cleaved.
Compare one mole of P's eight-residue molecules with one mole of Q's specified two-chain assemblies.
Which statement correctly gives the water requirements and the initial numbers of free reducing ends per specified molecule or assembly?
ⓐ. P requires seven water molecules and has one reducing end; Q requires six water molecules and has two reducing ends.
ⓑ. P requires eight water molecules and has one reducing end; Q requires eight water molecules and has two reducing ends.
ⓒ. P requires seven water molecules and has two reducing ends; Q requires six water molecules and has one reducing end.
ⓓ. P requires six water molecules and has one reducing end; Q requires seven water molecules and has two reducing ends.
Correct Answer: P requires seven water molecules and has one reducing end; Q requires six water molecules and has two reducing ends.
Explanation: \(\textbf{Connectivity in preparation P:}\)
An ordinary linear chain containing \(n\) monosaccharide residues has \(n-1\) inter-residue glycosidic linkages.
P contains eight glucose-derived residues in one connected chain.
\[
N_{\mathrm{links,P}}=8-1
\]
\[
N_{\mathrm{links,P}}=7
\]
Complete hydrolysis therefore consumes:
\[
N_{\mathrm{H_2O,P}}=7
\]
\(\textbf{Connectivity in preparation Q:}\)
Q contains two separate linear chains.
Its three-residue chain contains:
\[
N_{\mathrm{links,3}}=3-1=2
\]
Its five-residue chain contains:
\[
N_{\mathrm{links,5}}=5-1=4
\]
The total number of hydrolysable glycosidic linkages is:
\[
N_{\mathrm{links,Q}}=2+4
\]
\[
N_{\mathrm{links,Q}}=6
\]
Therefore:
\[
N_{\mathrm{H_2O,Q}}=6
\]
\(\textbf{Reducing-end comparison:}\)
Each ordinary linear chain retains one free reducing-end anomeric centre under the stated assumptions.
P contains one chain, so it has one reducing end.
Q contains two separate chains, so its assembly contains two reducing ends.
\(\textbf{Conservation check:}\)
Both preparations contain eight glucose-derived residues and yield eight glucose molecules upon complete hydrolysis.
However, P initially has one more glycosidic linkage than Q.
Consequently, P requires one additional water molecule for complete hydrolysis.
The difference in reducing-end count arises from the difference in the number of separate chains, not from a difference in total glucose content.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
P:\ 7\,\mathrm{H_2O},\ 1\ \text{reducing end}\\
Q:\ 6\,\mathrm{H_2O},\ 2\ \text{reducing ends}
\end{gathered}}
\]
586. A pure sucrose solution undergoes the following sequence of reactions.
Stage I: Complete acid hydrolysis of sucrose yields its ordinary constituent monosaccharides.
Stage II: The hydrolysate is treated with bromine water under conditions that quantitatively oxidise the aldehydic group accessible from glucose but do not directly oxidise the ketonic group of fructose.
Stage III: After complete removal of bromine and adjustment to suitable alkaline conditions, the resulting organic mixture is tested with Fehling's solution.
Assume that gluconic acid is not responsible for a positive Fehling's test and that the fructose remaining after Stage II is chemically unchanged.
Which prediction is most defensible?
ⓐ. Stage II converts both monosaccharides quantitatively into saccharic acid; Stage III must therefore be negative.
ⓑ. Stage II converts glucose into gluconic acid while fructose remains; Stage III can still be positive because fructose exhibits reducing behaviour under suitable alkaline conditions.
ⓒ. Stage II converts fructose directly into gluconic acid, while glucose remains; Stage III is positive exclusively because glucose is unchanged.
ⓓ. Stage I releases only glucose, and Stage III becomes negative because acid hydrolysis removes all carbonyl-derived functionality.
Correct Answer: Stage II converts glucose into gluconic acid while fructose remains; Stage III can still be positive because fructose exhibits reducing behaviour under suitable alkaline conditions.
Explanation: Sucrose contains one glucose unit and one fructose unit connected through a glycosidic linkage involving both anomeric centres. Intact sucrose is consequently non-reducing under ordinary conditions. Complete acid hydrolysis releases free glucose and fructose. Glucose is an aldohexose that can access an open-chain aldehydic form. Bromine water can oxidise that aldehydic group to form gluconic acid under suitable mild conditions. Fructose is instead a ketohexose with its ketonic group at C2. The specified bromine-water treatment does not directly oxidise this ketonic group, so fructose remains in the mixture. Stage III uses a different reaction medium. Under suitable alkaline reducing-sugar test conditions, fructose can undergo transformations that permit reducing behaviour. Consequently, a positive Fehling's test remains possible even after the glucose-derived aldehydic functionality has been oxidised. This does not imply that fructose originally possessed an aldehydic group in its ordinary open-chain structure. Nor does it imply that bromine water and alkaline Fehling's solution have identical chemical selectivities. The sequential experiment distinguishes initial glycosidic blocking, hydrolytic liberation of monosaccharides, selective mild oxidation and reducing behaviour under alkaline conditions.
587. Three open-chain ketohexose structures P, Q and R are compared using Fischer projections.
P is D-fructose, with its ketonic group at C2 and its hydroxyl group on the right at C5, the lowest asymmetric carbon.
Q is obtained from P by reversing only the configuration at C3.
R is obtained from P by reversing only the configuration at C5.
Every other asymmetric centre remains unchanged in Q and R.
No carbonyl group is reduced, oxidised or moved.
Which statement correctly compares their stereochemical relationships?
ⓐ. Q changes to the L-series because C3 is adjacent to the carbonyl group, whereas R remains in the D-series.
ⓑ. Both Q and R become enantiomers of P because reversal at any one asymmetric carbon produces the mirror-image molecule.
ⓒ. Q becomes an aldohexose because changing C3 reverses the position of the ketonic group.
ⓓ. Q is a D-series ketohexose and C3 epimer of P; R is L-series but not P's enantiomer.
Correct Answer: Q is a D-series ketohexose and C3 epimer of P; R is L-series but not P's enantiomer.
Explanation: Fructose is a ketohexose containing a ketonic group at C2 in its ordinary open-chain structure. Its asymmetric carbon atoms occur at C3, C4 and C5. The D/L designation depends on the configuration at the lowest asymmetric carbon, which is C5 for fructose. P is specified as D-fructose because its C5 configuration corresponds to the D-series. Q differs from P only at C3. Therefore, Q and P are C3 epimers, a particular kind of diastereomeric pair. Since the C5 configuration remains unchanged, Q stays in the D-series. R differs from P only at C5. Reversing this reference configuration changes its D/L designation, placing R in the L-series. However, enantiomerism requires reversal of every corresponding asymmetric centre. R retains the original configurations at C3 and C4, so it is not the enantiomer of P. Neither configurational change converts a ketone into an aldehyde. The three structures remain ketohexoses with the same molecular formula and carbonyl position. The distinction illustrates why configurational series, epimerism and enantiomerism must be evaluated independently.
588. An ordinary linear pentapeptide has the sequence Gly–Cys–Ala–Cys–Gly.
The initial pentapeptide contains five amino acid residues joined through four peptide bonds.
Treatment I oxidises its two cysteine side-chain thiol groups into one intrachain disulphide linkage, eliminating two hydrogen atoms per peptide molecule.
Treatment II completely hydrolyses all four peptide bonds but leaves the newly formed disulphide linkage intact.
The two cysteine-derived units therefore remain connected as one cystine molecule after peptide hydrolysis.
Take:
Glycine \(=75\ \mathrm{g\,mol^{-1}}\)
Cysteine \(=121\ \mathrm{g\,mol^{-1}}\)
Alanine \(=89\ \mathrm{g\,mol^{-1}}\)
Water \(=18\ \mathrm{g\,mol^{-1}}\).
Which pair correctly gives the molar mass of the oxidised pentapeptide and the combined molar mass of its hydrolysis products?
ⓐ. \(409\ \mathrm{g\,mol^{-1}}\) and \(481\ \mathrm{g\,mol^{-1}}\)
ⓑ. \(407\ \mathrm{g\,mol^{-1}}\) and \(481\ \mathrm{g\,mol^{-1}}\)
ⓒ. \(407\ \mathrm{g\,mol^{-1}}\) and \(479\ \mathrm{g\,mol^{-1}}\)
ⓓ. \(405\ \mathrm{g\,mol^{-1}}\) and \(477\ \mathrm{g\,mol^{-1}}\)
Correct Answer: \(407\ \mathrm{g\,mol^{-1}}\) and \(479\ \mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Free amino acid mass inventory:}\)
The pentapeptide contains two glycine, two cysteine and one alanine residues.
The sum of their free amino acid molar masses is:
\[
M_{\mathrm{free\ residues}}=2(75)+2(121)+89
\]
\[
M_{\mathrm{free\ residues}}=150+242+89
\]
\[
M_{\mathrm{free\ residues}}=481\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Formation of the ordinary pentapeptide:}\)
Five residues joined in one linear chain contain four peptide bonds.
Formation of those bonds eliminates four water molecules.
\[
M_{\mathrm{initial\ peptide}}=481-4(18)
\]
\[
M_{\mathrm{initial\ peptide}}=481-72
\]
\[
M_{\mathrm{initial\ peptide}}=409\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Intrachain disulphide formation:}\)
Oxidation of the two cysteine thiol groups forms one disulphide bond with loss of two hydrogen atoms.
\[
\mathrm{2R-SH\rightarrow R-S-S-R+2H}
\]
The net loss in molar mass is \(2\ \mathrm{g\,mol^{-1}}\).
\[
M_{\mathrm{oxidised\ peptide}}=409-2
\]
\[
M_{\mathrm{oxidised\ peptide}}=407\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Subsequent peptide-bond hydrolysis:}\)
Treatment II hydrolyses four peptide bonds and consumes four water molecules.
\[
M_{\mathrm{hydrolysate}}=407+4(18)
\]
\[
M_{\mathrm{hydrolysate}}=407+72
\]
\[
M_{\mathrm{hydrolysate}}=479\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Independent product-composition check:}\)
The products are two free glycine molecules, one alanine molecule and one cystine molecule.
The molar mass of cystine is:
\[
M_{\mathrm{cystine}}=2(121)-2
\]
\[
M_{\mathrm{cystine}}=240\ \mathrm{g\,mol^{-1}}
\]
Therefore:
\[
M_{\mathrm{products}}=2(75)+89+240
\]
\[
M_{\mathrm{products}}=150+89+240
\]
\[
M_{\mathrm{products}}=479\ \mathrm{g\,mol^{-1}}
\]
The independent calculation agrees with the hydrolysis mass balance.
\(\textbf{Final answer:}\)
\[
\boxed{\begin{gathered}
M_{\mathrm{oxidised\ peptide}}=407\ \mathrm{g\,mol^{-1}}\\
M_{\mathrm{hydrolysis\ products}}=479\ \mathrm{g\,mol^{-1}}
\end{gathered}}
\]
589. Three free alpha-amino acids—glycine, lysine and aspartic acid—are examined under two limiting pH conditions.
At very low pH, all free amino groups are protonated and all carboxyl groups are uncharged.
At very high pH, all free amino groups are uncharged and all carboxyl groups are deprotonated.
Lysine has one additional side-chain amino group.
Aspartic acid has one additional side-chain carboxyl group.
Glycine has no additional ionisable side-chain group.
In an electric field, cations move towards the negative electrode and anions towards the positive electrode.
The comparison concerns charge magnitude and direction only, not electrophoretic speed.
Which statement is correct?
ⓐ. At very low pH, aspartic acid has the greatest positive charge; at very high pH, lysine has the greatest negative charge.
ⓑ. At very low pH, all three amino acids have identical positive charges; at very high pH, all become neutral.
ⓒ. At low pH, lysine is most positive and moves to the cathode; at high pH, aspartate is most negative and moves to the anode.
ⓓ. At very low pH, lysine moves towards the positive electrode, whereas at very high pH, aspartic acid moves towards the negative electrode.
Correct Answer: At low pH, lysine is most positive and moves to the cathode; at high pH, aspartate is most negative and moves to the anode.
Explanation: Free alpha-amino acids contain amino and carboxyl functional groups capable of acid–base reactions. Under strongly acidic conditions, their free amino groups are protonated and positively charged. The carboxyl groups are assumed to remain uncharged in the specified limiting condition. Glycine and aspartic acid each possess one free amino group, so each has a net charge of +1. Lysine possesses an additional amino group in its side chain, giving it a net charge of +2. It therefore has the greatest positive charge magnitude and is attracted towards the negative electrode. Under strongly basic conditions, the amino groups are neutral while the carboxyl groups are negatively charged. Glycine and lysine each possess one carboxyl group and consequently have a net charge of −1. Aspartic acid contains an additional side-chain carboxyl group, giving it a net charge of −2. It therefore has the greatest negative charge magnitude and moves towards the positive electrode. The reversal reflects different limiting protonation states rather than a change in the amino acid carbon skeletons. Charge magnitude alone does not establish the relative migration speeds of different amino acids.
590. Two biological preparations P and Q produce the same qualitative mixture after complete chemical hydrolysis: alpha-amino acids and glucose.
Independent examination establishes that P originally contained a covalently connected protein component and carbohydrate component.
Q originally consisted of an ordinary protein physically mixed with free glucose, without covalent bonding between them.
Both samples were completely hydrolysed under conditions that preserve the identities of their constituent units.
An investigator concludes that identical hydrolysis products prove that P and Q originally possessed identical covalent structures.
Which conclusion is most defensible?
ⓐ. The investigator is correct because complete hydrolysis necessarily preserves the original arrangement of every covalent bond.
ⓑ. P cannot contain a protein component because glucose appears among its hydrolysis products.
ⓒ. Q must originally have contained glucose covalently linked to its protein because the final mixture contains both substances.
ⓓ. The conclusion is incorrect: the same carbohydrate units could originally be protein-linked or merely mixed with protein.
Correct Answer: The conclusion is incorrect: the same carbohydrate units could originally be protein-linked or merely mixed with protein.
Explanation: Complete hydrolysis provides information about the constituent units of a substance or mixture. An ordinary protein contains alpha-amino acid residues joined through peptide linkages. Hydrolysis of its peptide backbone can release the constituent amino acids. A carbohydrate component may also release glucose if its structure contains glucose-derived units connected through hydrolysable linkages. In P, the protein and carbohydrate components are initially associated through covalent connectivity. In Q, the protein and glucose are separate chemical substances present in one physical mixture. Suitable complete hydrolysis can nevertheless produce mixtures containing the same kinds of final constituents. Therefore, the identities of the hydrolysis products do not by themselves establish the original connectivity. The independent structural evidence concerning P and Q is essential for distinguishing the preparations. The presence of glucose does not prevent a preparation from containing a protein component. Equally, detecting glucose and amino acids together does not prove that they originated from one covalently connected molecule. The investigator has confused constituent composition with the molecular arrangement of those constituents. This distinction is important when interpreting complex biological materials containing more than one biomolecular class.
591. A folded protein contains two regions with different side-chain environments.
Region P contains closely packed valine, leucine and isoleucine side chains in the nonpolar interior of the protein.
Region Q contains a positively charged lysine side chain near a negatively charged glutamate side chain.
Treatment I replaces one interior valine residue with aspartic acid while preserving the number of residues and peptide-bond connectivity.
Treatment II, applied to a separate native sample, changes the pH enough to neutralise the original glutamate carboxylate without replacing any residue.
No disulphide linkage is altered.
Which conclusion correctly distinguishes the two treatments?
ⓐ. Treatment I changes residue identity and can disturb nonpolar packing, whereas Treatment II alters an electrostatic interaction through protonation without necessarily changing primary sequence.
ⓑ. Both treatments necessarily change primary structure because altering the charge of glutamate is chemically identical to replacing it with another amino acid.
ⓒ. Treatment I preserves the original primary sequence because valine and aspartic acid are both alpha-amino acids, whereas Treatment II necessarily breaks peptide bonds.
ⓓ. Neither treatment can influence tertiary structure because only disulphide linkages contribute to protein folding.
Correct Answer: Treatment I changes residue identity and can disturb nonpolar packing, whereas Treatment II alters an electrostatic interaction through protonation without necessarily changing primary sequence.
Explanation: Valine, leucine and isoleucine contain nonpolar hydrocarbon side chains. Such side chains can participate in close packing and weak interactions within the folded interior of a protein. The original region P is specified to possess this kind of nonpolar environment. Aspartic acid differs from valine because it contains an additional carboxyl group in its side chain. Replacing valine with aspartic acid changes the amino acid identity at a particular sequence position. Therefore, Treatment I changes primary structure even though the chain length and peptide-bond connectivity remain unchanged. It also introduces a chemically different side chain into the original nonpolar region, potentially disturbing local packing and higher-order folding. Region Q is stabilised partly through attraction between oppositely charged lysine and glutamate groups. Treatment II changes the protonation state of the glutamate side chain and removes its original negative charge. Consequently, the electrostatic attraction can weaken without changing the identity of either amino acid residue. The two treatments therefore act through different chemical mechanisms. Both may influence protein conformation, but only the first necessarily changes the stated amino acid sequence. Protein folding involves several interactions, including van der Waals forces, electrostatic attractions, hydrogen bonds and disulphide linkages, rather than one universal stabilising bond.
592. Four ordinary alpha-amino acids are selected for a structural and nutritional comparison.
| Amino acid | Side-chain characteristic |
| Serine | Contains –CH₂OH |
| Threonine | Contains –CH(OH)CH₃ |
| Tyrosine | Contains a phenolic –OH group |
| Phenylalanine | Contains a phenyl group without a hydroxyl substituent |
According to the NCERT classification, threonine and phenylalanine are essential amino acids, whereas serine and tyrosine are non-essential.
A reagent recognises the presence of a free side-chain hydroxyl group, whether alcoholic or phenolic.
The investigator must identify an amino acid that is both essential and reactive towards this reagent.
Which amino acid satisfies both requirements?
ⓐ. Serine
ⓑ. Tyrosine
ⓒ. Phenylalanine
ⓓ. Threonine
Correct Answer: Threonine
Explanation: The two selection criteria concern different properties of amino acids. Essentiality refers to whether an amino acid must be supplied through the diet because the body cannot synthesise it adequately. The reagent's selectivity instead depends on the presence of a particular side-chain functional group. Serine possesses an alcoholic hydroxyl group and therefore satisfies the reagent criterion. However, it belongs to the non-essential group in the NCERT classification. Tyrosine possesses a phenolic hydroxyl group and also satisfies the stated chemical criterion. Nevertheless, tyrosine is classified as non-essential. Phenylalanine is essential but possesses an unsubstituted phenyl side chain without the required free hydroxyl group. It consequently fails the reagent criterion. Threonine contains an alcoholic hydroxyl group in its side chain and is also classified as essential. Therefore, it satisfies both requirements simultaneously. The question illustrates why nutritional classification cannot be inferred merely from the presence of oxygen, an aromatic ring or another particular side-chain feature. Chemical reactivity and dietary essentiality must be evaluated independently before selecting the appropriate amino acid.
593. Sucrose is compared with the monosaccharides obtained after its complete hydrolysis.
One mole of sucrose is completely hydrolysed to one mole of glucose and one mole of fructose.
Intact sucrose possesses eight free hydroxyl groups available for ordinary acetylation.
Each liberated free glucose or fructose molecule possesses five hydroxyl groups available for complete acetylation.
For every hydroxyl group converted into an acetate ester, the net increase in molecular mass is \(42\ \mathrm{g\,mol^{-1}}\).
Take:
\[
M_{\mathrm{sucrose}}=342\ \mathrm{g\,mol^{-1}}
\]
\[
M_{\mathrm{glucose}}=M_{\mathrm{fructose}}=180\ \mathrm{g\,mol^{-1}}
\]
All acetylations are complete, and no other reaction occurs during the acetylation stages.
What is the difference between the combined molar masses of the two fully acetylated monosaccharides and the molar mass of fully acetylated intact sucrose?
ⓐ. \(84\ \mathrm{g\,mol^{-1}}\)
ⓑ. \(126\ \mathrm{g\,mol^{-1}}\)
ⓒ. \(18\ \mathrm{g\,mol^{-1}}\)
ⓓ. \(102\ \mathrm{g\,mol^{-1}}\)
Correct Answer: \(102\ \mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Available hydroxyl groups in intact sucrose:}\)
Sucrose contains glucose and fructose units connected through their anomeric centres.
Formation of the glycosidic linkage removes two originally free hydroxyl functionalities through condensation.
Intact sucrose consequently contains eight free hydroxyl groups.
\(\textbf{Molar mass of fully acetylated sucrose:}\)
Eight hydroxyl groups undergo acetylation.
\[
M_{\mathrm{acetylated\ sucrose}}=342+8(42)
\]
\[
M_{\mathrm{acetylated\ sucrose}}=342+336
\]
\[
M_{\mathrm{acetylated\ sucrose}}=678\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Hydrolysis before acetylation:}\)
Complete sucrose hydrolysis produces one glucose and one fructose molecule.
\[
\mathrm{Sucrose+H_2O\rightarrow Glucose+Fructose}
\]
Each liberated monosaccharide possesses five hydroxyl groups available for acetylation.
\(\textbf{Mass of the fully acetylated glucose product:}\)
\[
M_{\mathrm{glucose\ pentaacetate}}=180+5(42)
\]
\[
M_{\mathrm{glucose\ pentaacetate}}=390\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Mass of the fully acetylated fructose product:}\)
\[
M_{\mathrm{fructose\ pentaacetate}}=180+5(42)
\]
\[
M_{\mathrm{fructose\ pentaacetate}}=390\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Combined product comparison:}\)
\[
M_{\mathrm{two\ acetylated\ products}}=390+390
\]
\[
M_{\mathrm{two\ acetylated\ products}}=780\ \mathrm{g\,mol^{-1}}
\]
The difference from acetylated intact sucrose is:
\[
\Delta M=780-678
\]
\[
\Delta M=102\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Independent chemical check:}\)
Hydrolysis introduces the elements of one water molecule into the original sucrose-derived material.
It also regenerates two additional hydroxyl groups that can each undergo acetylation.
\[
\Delta M=18+2(42)
\]
\[
\Delta M=18+84
\]
\[
\Delta M=102\ \mathrm{g\,mol^{-1}}
\]
Both calculations agree.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta M=102\ \mathrm{g\,mol^{-1}}}
\]
594. An RNA molecule forms a short intrachain hairpin.
The sequence is 5′-GCA-AAUA-UGC-3′.
The first three bases, GCA, pair antiparallel with the last three bases, UGC.
The central AAUA segment forms an unpaired loop.
The stem initially contains two G–C pairs and one A–U pair.
A selective modification changes the third nucleotide of the first stem segment from A to G and simultaneously changes its complementary partner from U to C.
All ribose sugars, phosphodiester linkages and other bases remain unchanged.
Assume that an A–U pair contributes two hydrogen bonds and a G–C pair contributes three.
Which conclusion is correct?
ⓐ. The original stem contains seven hydrogen bonds, and the modification produces eight without changing its RNA constitution.
ⓑ. The original stem contains eight hydrogen bonds, and the modification produces nine; the molecule remains RNA because its ribose-based constitution is retained.
ⓒ. The original stem contains nine hydrogen bonds, and the modification produces eight because replacing A–U with G–C reduces hydrogen bonding.
ⓓ. The original stem contains eight hydrogen bonds, and the modification converts the entire molecule into DNA because the modified pair is G–C.
Correct Answer: The original stem contains eight hydrogen bonds, and the modification produces nine; the molecule remains RNA because its ribose-based constitution is retained.
Explanation: \(\textbf{Original hairpin stem:}\)
The paired sections are GCA and UGC in antiparallel orientations.
The stipulated stem contains two G–C pairs and one A–U pair.
\(\textbf{Initial hydrogen-bond count:}\)
Each G–C pair contributes three hydrogen bonds.
Each A–U pair contributes two.
\[
N_{\mathrm{H,initial}}=2(3)+1(2)
\]
\[
N_{\mathrm{H,initial}}=6+2
\]
\[
N_{\mathrm{H,initial}}=8
\]
\(\textbf{Effect of the paired substitution:}\)
The A in the third position of the first stem segment is changed to G.
Its paired U is simultaneously changed to C.
Therefore, the original A–U pair becomes a G–C pair while maintaining complementarity.
\(\textbf{Modified stem composition:}\)
The stem now contains three G–C pairs and no A–U pair.
\[
N_{\mathrm{G-C,modified}}=3
\]
\[
N_{\mathrm{A-U,modified}}=0
\]
\(\textbf{Modified hydrogen-bond count:}\)
\[
N_{\mathrm{H,modified}}=3(3)+0(2)
\]
\[
N_{\mathrm{H,modified}}=9
\]
\(\textbf{Change in hydrogen bonding:}\)
\[
\Delta N_{\mathrm{H}}=9-8
\]
\[
\Delta N_{\mathrm{H}}=+1
\]
\(\textbf{Molecular identity check:}\)
The nucleotide sugar remains ribose throughout the treatment.
The phosphodiester backbone is also preserved.
A change in nitrogenous-base identity or pairing does not automatically convert RNA into DNA.
The molecule remains an RNA chain capable of the specified intrachain complementary association.
\(\textbf{Final answer:}\)
\[
N_{\mathrm{H,initial}}=8;\quad N_{\mathrm{H,modified}}=9
\]
595. Two samples, P and Q, contain equal molar amounts of pure D-glucose and pure gluconic acid, respectively.
P is first treated with bromine water under suitable conditions, converting its aldehydic group into a carboxyl group.
Q is left untreated during this stage.
Both resulting samples are subsequently oxidised completely with nitric acid under conditions that convert the terminal primary alcoholic group into a carboxyl group without breaking the carbon skeleton.
The final organic product from each sample is identified.
A student argues that identical final products must imply identical original functional groups.
Which conclusion is most appropriate?
ⓐ. Both final products are gluconic acid, proving that nitric acid cannot oxidise a primary alcoholic group.
ⓑ. P produces saccharic acid, whereas Q produces fructose because gluconic acid lacks an aldehydic group.
ⓒ. Both yield saccharic acid, but P began with an aldehyde and Q with a carboxyl group.
ⓓ. P and Q must have identical molecular formulas because both preserve their six-carbon skeletons throughout the experiment.
Correct Answer: Both yield saccharic acid, but P began with an aldehyde and Q with a carboxyl group.
Explanation: D-glucose contains an aldehydic group at C1 in its open-chain structure. It also contains a primary alcoholic group at C6. Bromine water can oxidise the aldehydic group of glucose to produce gluconic acid under suitable mild conditions. Therefore, the first treatment converts P into the same chemical substance initially present in Q. Both resulting samples possess a carboxyl group at C1 and retain a primary alcoholic group at C6. Nitric acid can oxidise the remaining terminal primary alcoholic group to another carboxyl group. Consequently, both samples produce saccharic acid, a dicarboxylic acid. However, their original structures were different because glucose initially contained an aldehydic group whereas gluconic acid already contained a carboxyl group at that position. Identical products obtained through sufficiently extensive oxidation do not establish identical starting functional groups. The molecular formulas of glucose and gluconic acid also differ despite their common six-carbon skeleton. The experiment illustrates the distinction between identifying a final oxidation product and reconstructing the functional-group constitution of the starting substance. The intermediate bromine-water treatment supplies information that would be lost if only the final nitric-acid oxidation products were examined.
596. The open-chain and characteristic cyclic structures of D-glucose and D-fructose are compared.
Open-chain D-glucose contains an aldehydic group at C1 and asymmetric carbon atoms at C2, C3, C4 and C5.
Its C5 hydroxyl group adds intramolecularly to C1 to form glucopyranose.
Open-chain D-fructose contains a ketonic group at C2 and asymmetric carbon atoms at C3, C4 and C5.
Its C5 hydroxyl group adds intramolecularly to C2 to form fructofuranose.
Assume that every newly formed anomeric carbon is asymmetric and that no original asymmetric centre loses its configuration during cyclisation.
Which statement correctly compares the changes in asymmetric-centre counts and anomeric positions?
ⓐ. Glucose increases from four to five asymmetric centres with C1 becoming anomeric, while fructose increases from three to four with C2 becoming anomeric.
ⓑ. Glucose increases from four to six asymmetric centres with C6 becoming anomeric, while fructose remains at three because ketones cannot form cyclic hemiketals.
ⓒ. Glucose remains at four asymmetric centres because aldehydic carbon atoms cannot become asymmetric, while fructose increases from three to five.
ⓓ. Both monosaccharides acquire an anomeric centre at C1 because every carbohydrate ring closes through its first carbon atom.
Correct Answer: Glucose increases from four to five asymmetric centres with C1 becoming anomeric, while fructose increases from three to four with C2 becoming anomeric.
Explanation: Open-chain glucose is an aldohexose whose carbonyl group occurs at C1. Its asymmetric carbon atoms are C2, C3, C4 and C5, giving four asymmetric centres before cyclisation. Formation of glucopyranose involves intramolecular addition of the C5 hydroxyl group to the C1 aldehydic group. The carbonyl carbon changes from a planar arrangement to a tetrahedral hemiacetal carbon. Under the stated assumptions, this produces a new asymmetric centre at C1. Cyclic glucose therefore possesses five asymmetric centres. Fructose is a ketohexose whose open-chain carbonyl group occupies C2. It initially possesses three asymmetric centres, located at C3, C4 and C5. Formation of fructofuranose involves addition of the C5 hydroxyl group to the C2 ketonic carbon. This produces a new tetrahedral hemiketal centre at C2. Consequently, cyclic fructose possesses four asymmetric centres. The newly created anomeric configurations give rise to α- and β-forms in both sugars. The comparison also explains why glucose and fructose have different anomeric carbon positions despite possessing the same molecular formula. Cyclisation creates anomeric stereochemistry without changing the original six-carbon skeleton.
597. Three ordinary disaccharides P, Q and R are compared using their constituent structures.
| Disaccharide | Constituent units and linkage |
| P | Sucrose: glucose C1 joined to fructose C2 through their anomeric centres |
| Q | Lactose: galactose C1 joined to glucose C4 |
| R | Maltose: glucose C1 joined to glucose C4 |
Each cyclic glucose or galactose unit possesses one primary alcoholic –CH₂OH group at C6.
Each cyclic fructose unit possesses two primary alcoholic –CH₂OH groups, at C1 and C6.
None of the stated glycosidic linkages involves these primary alcoholic groups.
A selective reagent recognises free primary alcoholic groups but does not react with secondary alcohols or cleave glycosidic bonds.
The investigator also performs ordinary reducing-sugar tests on the intact disaccharides.
Which statement correctly combines the primary alcoholic-group counts and reducing characters?
ⓐ. P has two primary alcoholic groups and is reducing; Q and R each have three and are non-reducing.
ⓑ. P, Q and R each possess two primary alcoholic groups, but only P is reducing.
ⓒ. P has three primary alcoholic groups and is reducing; Q and R each have two and are non-reducing.
ⓓ. P has three primary alcoholic groups and is non-reducing; Q and R each have two and are reducing.
Correct Answer: P has three primary alcoholic groups and is non-reducing; Q and R each have two and are reducing.
Explanation: The first part of the comparison requires identifying primary alcoholic groups rather than simply counting all hydroxyl groups. Cyclic glucose has one primary alcoholic group at C6. Cyclic galactose likewise has one such group at C6. Cyclic fructose possesses primary alcoholic groups at C1 and C6. Sucrose contains one glucose unit and one fructose unit, so it possesses three primary alcoholic groups under the stated linkage arrangement. Lactose contains one galactose and one glucose unit, giving two primary alcoholic groups. Maltose contains two glucose units and therefore also possesses two primary alcoholic groups. The second part concerns reducing character, which depends on the availability of a free anomeric centre. In sucrose, both anomeric centres participate in the inter-residue glycosidic linkage. Consequently, sucrose is non-reducing. In lactose and maltose, one anomeric centre remains available for ordinary ring–chain interconversion, making both reducing disaccharides. Thus, the number of primary alcoholic groups does not independently establish reducing character. The correct interpretation combines two different aspects of carbohydrate functional-group constitution.
598. A purified starch preparation contains 20% amylose and 80% amylopectin by mass.
For this hypothetical preparation, the average amylose molecule contains 400 anhydroglucose residues, while the average amylopectin molecule contains 1600 anhydroglucose residues.
Assume that every anhydroglucose residue contributes \(162\ \mathrm{g\,mol^{-1}}\) to polymer molar mass and that terminal-group corrections are negligible.
The total dry starch mass is \(324\ \mathrm{g}\).
Amylose is essentially unbranched, whereas amylopectin contains α-(1→6) branch-forming linkages.
The required comparison concerns the number of polymer molecules, not merely their masses.
Which statement correctly gives the mole ratio of amylose molecules to amylopectin molecules and identifies the branched component?
ⓐ. The mole ratio is \(1:4\); amylose is the branched component.
ⓑ. The mole ratio is \(1:1\); amylopectin is the branched component.
ⓒ. The mole ratio is \(4:1\); amylopectin is the branched component.
ⓓ. The mole ratio is \(1:1\); amylose is the branched component.
Correct Answer: The mole ratio is \(1:1\); amylopectin is the branched component.
Explanation: \(\textbf{Mass of each starch component:}\)
The preparation contains 20% amylose by mass.
\[
m_{\mathrm{amylose}}=324\left(\frac{20}{100}\right)
\]
\[
m_{\mathrm{amylose}}=64.8\ \mathrm{g}
\]
The remaining 80% is amylopectin.
\[
m_{\mathrm{amylopectin}}=324\left(\frac{80}{100}\right)
\]
\[
m_{\mathrm{amylopectin}}=259.2\ \mathrm{g}
\]
\(\textbf{Average molar mass of amylose:}\)
Each average amylose molecule contains 400 anhydroglucose residues.
\[
M_{\mathrm{amylose}}=400(162)
\]
\[
M_{\mathrm{amylose}}=64800\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Average molar mass of amylopectin:}\)
Each average amylopectin molecule contains 1600 anhydroglucose residues.
\[
M_{\mathrm{amylopectin}}=1600(162)
\]
\[
M_{\mathrm{amylopectin}}=259200\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Moles of amylose molecules:}\)
\[
n_{\mathrm{amylose}}=\frac{64.8}{64800}
\]
\[
n_{\mathrm{amylose}}=1.00\times10^{-3}\ \mathrm{mol}
\]
\(\textbf{Moles of amylopectin molecules:}\)
\[
n_{\mathrm{amylopectin}}=\frac{259.2}{259200}
\]
\[
n_{\mathrm{amylopectin}}=1.00\times10^{-3}\ \mathrm{mol}
\]
\(\textbf{Molecular-number ratio:}\)
\[
n_{\mathrm{amylose}}:n_{\mathrm{amylopectin}}=1:1
\]
\(\textbf{Chemical interpretation:}\)
The two components have different mass fractions but equal numbers of molecules in this hypothetical sample.
The greater amylopectin mass is balanced by its greater average degree of polymerisation.
Amylopectin is the branched starch component containing α-(1→6) branch-forming linkages, while amylose is essentially unbranched.
The comparison demonstrates why a polymer's mass fraction cannot be equated directly with its molecular-number fraction.
\(\textbf{Final answer:}\)
\[
n_{\mathrm{amylose}}:n_{\mathrm{amylopectin}}=1:1
\]
599. A single branched glucose oligosaccharide possesses one free reducing end.
The molecule contains one main α-(1→4)-linked glucose chain and three side chains.
Each side chain is attached through one α-(1→6) glycosidic linkage involving the anomeric carbon of its first glucose residue.
No other branch occurs.
Initially, the three branch-forming anomeric centres are engaged in glycosidic bonds, while the main chain retains one free reducing end.
A selective reagent hydrolyses all three α-(1→6) linkages without cleaving any α-(1→4) linkage.
Each newly liberated side-chain anomeric centre becomes an ordinary free hemiacetal.
Which statement correctly gives the numbers of separate carbohydrate fragments and free reducing ends after treatment?
ⓐ. Four fragments and four free reducing ends
ⓑ. Four fragments and one free reducing end
ⓒ. Three fragments and four free reducing ends
ⓓ. Three fragments and three free reducing ends
Correct Answer: Four fragments and four free reducing ends
Explanation: \(\textbf{Original connectivity:}\)
The starting molecule contains one main chain with three separately attached side chains.
All four chain portions are initially connected through three α-(1→6) branch-forming linkages.
The original connected molecule has one free reducing end.
\(\textbf{Consequences of selective debranching:}\)
Hydrolysis of the first branch-forming linkage releases one side chain as a separate carbohydrate fragment.
Cleavage of the remaining two branch connections releases the other two side chains.
The main α-(1→4)-linked chain remains intact.
\(\textbf{Fragment count:}\)
Each cleavage of a distinct branch connection increases the number of connected fragments by one.
\[
N_{\mathrm{fragments}}=1+3
\]
\[
N_{\mathrm{fragments}}=4
\]
\(\textbf{New anomeric functionality:}\)
Every branch connection originally involves the anomeric carbon of the attached side chain.
Hydrolysis of such a bond regenerates a free hemiacetal at that position.
Therefore, each detached side chain acquires a free reducing end.
\[
N_{\mathrm{new\ reducing\ ends}}=3
\]
\(\textbf{Total reducing-end count:}\)
The original reducing end on the main chain is preserved.
\[
N_{\mathrm{reducing\ ends,final}}=1+3
\]
\[
N_{\mathrm{reducing\ ends,final}}=4
\]
\(\textbf{Hydrolysis check:}\)
Three branch-forming glycosidic bonds are cleaved.
Consequently, three water molecules are consumed per original branched molecule.
No glucose residue is removed or destroyed.
The increase in reducing ends arises from liberation of previously bonded anomeric centres rather than from synthesis of additional glucose units.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{fragments}}=4;\qquad N_{\mathrm{reducing\ ends}}=4}
\]
600. An ordinary linear tetrapeptide has the sequence Gly–Lys–Arg–His.
Glycine, lysine, arginine and histidine are ordinary alpha-amino acid residues.
The lysine side chain contains one free aliphatic primary amino group.
The arginine side chain contains a guanidino group, while the histidine side chain contains an imidazole ring.
For this experiment, reagent X reacts only with ordinary free primary amino groups attached directly to an aliphatic carbon; it does not react with peptide amide nitrogens, guanidino nitrogens or imidazole nitrogens.
Treatment I blocks the N-terminal alpha-amino group of glycine without changing any other amino functionality.
Treatment II subsequently hydrolyses all three peptide bonds, but the original N-terminal blocking group remains intact.
How many groups can react with X per original tetrapeptide molecule immediately after Treatment I and after Treatment II, respectively?
ⓐ. One after Treatment I and three after Treatment II
ⓑ. Two after Treatment I and four after Treatment II
ⓒ. One after Treatment I and four after Treatment II
ⓓ. Three after Treatment I and five after Treatment II
Correct Answer: One after Treatment I and four after Treatment II
Explanation: \(\textbf{Reactive groups in the intact tetrapeptide:}\)
The free alpha-amino group of N-terminal glycine is initially an ordinary primary amino group.
Lysine also contributes one ordinary primary amino group through its side chain.
The alpha-amino groups of the internal lysine, arginine and histidine residues participate in peptide bonds.
They are therefore not present as free primary amino groups in the intact tetrapeptide.
The arginine guanidino group and histidine imidazole group are explicitly excluded by the reagent's selectivity.
\(\textbf{Effect of Treatment I:}\)
Treatment I blocks the N-terminal glycine alpha-amino group.
The lysine side-chain amino group remains unmodified.
Therefore:
\[
N_{\mathrm{X-reactive,I}}=1
\]
\(\textbf{Backbone hydrolysis in Treatment II:}\)
The tetrapeptide contains three peptide bonds.
Complete hydrolysis releases the four constituent amino acid units.
However, the glycine alpha-amino group retains its blocking group.
The alpha-amino groups of lysine, arginine and histidine become free following peptide-bond hydrolysis.
\(\textbf{Reactive groups after complete hydrolysis:}\)
The three liberated free alpha-amino groups are reactive towards X.
The lysine side-chain primary amino group also remains reactive.
\[
N_{\mathrm{X-reactive,II}}=3+1
\]
\[
N_{\mathrm{X-reactive,II}}=4
\]
\(\textbf{Functional-group interpretation:}\)
The side chains of arginine and histidine contain nitrogen, but their specified functional groups are not ordinary aliphatic primary amino groups.
The answer therefore depends on chemical functionality rather than simply counting nitrogen atoms.
It also requires distinguishing side-chain amino groups from alpha-amino groups released by peptide hydrolysis.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{after\ I}}=1;\qquad N_{\mathrm{after\ II}}=4}
\]