1. Which statement most accurately describes the chemical nature of biomolecules in living systems?
ⓐ. All biomolecules are high-molecular-mass organic polymers.
ⓑ. Biomolecules are chemical substances that participate in the structure and functioning of living systems.
ⓒ. Biomolecules follow chemical principles that differ from those governing non-living substances.
ⓓ. All biomolecules consist of identical repeating molecular units.
Correct Answer: Biomolecules are chemical substances that participate in the structure and functioning of living systems.
Explanation: Biomolecules are chemical substances associated with the composition, organisation and functioning of living systems. They include major classes such as carbohydrates, proteins, nucleic acids and lipids. These substances differ considerably in molecular size, structure and chemical properties. Some, such as proteins and nucleic acids, are large molecules formed from smaller constituent units. Others, such as glucose and many vitamins, are comparatively small molecules. Therefore, large molecular size or polymeric structure is not an essential characteristic of every biomolecule. The atoms and molecules present in living organisms obey the same fundamental chemical principles as substances outside living systems. The distinguishing feature of a biomolecule is its association with biological structure or function, not the existence of a separate set of chemical laws.
2. Consider the following substances found in or associated with living systems:
Statement I: Glucose is a carbohydrate that can serve as an energy source.
Statement II: DNA is a protein because it contains nitrogen.
Statement III: Enzymes are generally proteins involved in catalysing biological reactions.
Statement IV: Vitamins are necessarily polymers of amino acids.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and IV only
ⓒ. I and IV only
ⓓ. I and III only
Correct Answer: I and III only
Explanation: Statement I is correct because glucose belongs to the carbohydrate class and is an important source of energy in living organisms. Its biological importance is associated with its participation in energy-producing chemical processes. Statement II is incorrect because DNA is a nucleic acid, not a protein. Although nitrogen occurs in both proteins and nucleic acids, the presence of a common element does not establish that two substances belong to the same biomolecular class. Proteins are constructed from amino acid residues, whereas nucleic acids contain nucleotide units. Statement III is correct because enzymes act as biological catalysts, and the great majority of enzymes are proteins. Catalysts increase the rates of chemical reactions without being consumed in the overall reaction. Statement IV is incorrect because vitamins are accessory dietary factors and are not universally constructed from amino acid residues. The correct classification of a biomolecule therefore requires consideration of its chemical constitution and not merely its elemental composition or biological importance.
3. Three biological macromolecules P, Q and R are examined separately.
P is constructed from alpha-amino acid residues joined by peptide linkages.
Q is constructed from nucleotide units joined in a polynucleotide chain.
R is a carbohydrate composed of numerous glucose units.
Which identification is consistent with these structural descriptions?
ⓐ. P—Protein; Q—Nucleic acid; R—Polysaccharide
ⓑ. P—Nucleic acid; Q—Protein; R—Polysaccharide
ⓒ. P—Protein; Q—Polysaccharide; R—Nucleic acid
ⓓ. P—Polysaccharide; Q—Nucleic acid; R—Protein
Correct Answer: P—Protein; Q—Nucleic acid; R—Polysaccharide
Explanation: The first step is to identify the chemical nature of the constituent units rather than relying only on the fact that all three substances are macromolecules. P contains alpha-amino acid residues joined through peptide bonds, which is characteristic of a protein or polypeptide. The peptide linkage connects the carboxyl-derived portion of one amino acid residue with the amino-group-derived portion of another. Q consists of nucleotide units, which identify it as a nucleic acid. Nucleotides contain a nitrogenous base, a pentose sugar and a phosphate component. In a nucleic acid chain, neighbouring nucleotide units are connected through phosphodiester linkages. R consists of numerous glucose units and therefore represents a glucose-based polysaccharide. Starch, cellulose and glycogen are familiar examples of this general category. Although proteins, nucleic acids and polysaccharides may all be polymeric, their constituent units and connecting linkages are chemically different. Identifying the monomeric unit is therefore a stronger classification method than recognising molecular size alone.
4. Two isolated biological polymers have similar overall elemental compositions containing carbon, hydrogen, oxygen and nitrogen. Hydrolysis of polymer X produces alpha-amino acids, while hydrolysis of polymer Y produces nucleotide units. Which conclusion is most appropriate?
ⓐ. Both polymers are proteins because they contain nitrogen.
ⓑ. Both polymers are nucleic acids because their elemental compositions overlap.
ⓒ. X is a protein and Y is a nucleic acid, despite the overlap in constituent elements.
ⓓ. X is a nucleic acid and Y is a protein because both contain complex organic units.
Correct Answer: X is a protein and Y is a nucleic acid, despite the overlap in constituent elements.
Explanation: The important evidence is the nature of the units obtained from hydrolysis, rather than the mere presence of carbon, hydrogen, oxygen and nitrogen. These elements occur in several chemically different biomolecular classes. Polymer X produces alpha-amino acids, indicating that its original structure was based on amino acid residues. A chain of such residues connected through peptide linkages is classified as a polypeptide or protein. Polymer Y produces nucleotide units, indicating a polynucleotide structure. Such polymers belong to the nucleic acid class. Nucleotides possess nitrogenous bases, sugars and phosphate groups, so phosphorus is also an important constituent of nucleic acids. However, even an elemental analysis showing phosphorus would not replace direct identification of the molecular units. Chemical classification depends on how atoms are arranged and connected within the molecule. Consequently, similar elemental compositions do not establish identical biomolecular identities. The hydrolysis evidence provides the decisive distinction between X and Y.
5. A student argues that every carbohydrate must be a polymer because starch is composed of numerous glucose units. Which observation most directly disproves the argument?
ⓐ. Cellulose also contains numerous glucose units.
ⓑ. Glycogen serves as a storage carbohydrate in animals.
ⓒ. Starch can be hydrolysed to produce glucose.
ⓓ. Glucose is a monosaccharide carbohydrate, not a polymer.
Correct Answer: Glucose is a monosaccharide carbohydrate, not a polymer.
Explanation: The student's argument incorrectly extends a property of one carbohydrate category to the entire carbohydrate class. Starch is a polysaccharide, meaning that it consists of a large number of monosaccharide units. Glucose, however, is itself a monosaccharide. A monosaccharide is the simplest carbohydrate unit in the hydrolysis-based classification and cannot be hydrolysed into smaller carbohydrate units. Therefore, glucose establishes that a carbohydrate need not be a polymer. Cellulose and glycogen are also polysaccharides, so their existence does not disprove the student's claim. Hydrolysis of starch to glucose establishes the constituent-unit relationship between a polysaccharide and a monosaccharide. It does not establish that the glucose product is polymeric. The broader distinction is that a biomolecular class may include substances of very different structural complexity. Classification must therefore accommodate both simple carbohydrate molecules and larger carbohydrates constructed from them.
6. A biological substance is described as a chemical messenger, but its molecular structure is found to be a chain of amino acid residues. Which interpretation correctly relates its chemical constitution to its biological classification?
ⓐ. Its messenger role proves that it cannot be a polypeptide.
ⓑ. Its polypeptide constitution is compatible with its function as a hormone.
ⓒ. Its amino acid residues establish that it must be an enzyme.
ⓓ. A polypeptide hormone must undergo complete hydrolysis into free amino acids before it can function as a messenger.
Correct Answer: Its polypeptide constitution is compatible with its function as a hormone.
Explanation: Chemical constitution and biological function provide two distinct ways of classifying the same substance. A polypeptide is chemically characterised by amino acid residues connected through peptide bonds. A hormone, in contrast, is identified by its role as a chemical messenger involved in coordinating biological activities. These two descriptions are not mutually exclusive. Insulin is a familiar example of a polypeptide hormone. Its chemical constitution explains why it belongs to the broad category of amino-acid-based molecules, while its biological action explains why it is classified as a hormone. An enzyme may also be a protein, but its defining role is catalytic rather than hormonal signalling. Therefore, the presence of peptide bonds does not by itself establish that a molecule functions as an enzyme. Likewise, the term hormone does not imply one universal polymeric structure because hormones can have different chemical constitutions. This distinction prevents the incorrect assumption that chemical class and biological role must correspond one-to-one.
7. Consider the following Assertion and Reason.
Assertion (A): The chemical reactions occurring inside living organisms obey the same fundamental chemical principles as reactions occurring outside living organisms.
Reason (R): Living organisms are composed of atoms and molecules, but their biological functions depend on the organised interaction of numerous chemical substances and reactions.
Choose the correct option.
ⓐ. Both A and R are true, and R is the correct explanation of A.
ⓑ. Both A and R are true, but R is not the correct explanation of A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R is the correct explanation of A.
Explanation: The Assertion is true because living matter is constructed from the same chemical elements and molecular species that are subject to ordinary chemical principles. Chemical bonding, reaction energetics and the fundamental requirements for chemical transformations remain applicable within living systems. The Reason is also true because cells contain interacting biomolecules whose activities are coordinated to sustain life. The appearance of biological complexity does not require a separate set of chemical laws. Instead, complexity arises from molecular organisation, selective interactions and controlled chemical reactions. For example, enzymes can accelerate particular reactions under biological conditions without violating the principles governing catalysis. Carbohydrates may supply energy, proteins may provide structural or catalytic functions, and nucleic acids may store biological information. Their combined action produces functions that cannot be understood by considering each molecule in isolation. The Reason therefore supports the Assertion by explaining how ordinary chemical substances and reactions can collectively produce the organised processes characteristic of living systems.
8. Examine the following table describing some biomolecular classes.
| Row | Biomolecular class | Structural description | Possible biological role |
| I | Protein | Peptide-linked amino acid residues | Catalysing biological reactions |
| II | Nucleic acid | Linked nucleotide units | Storage of hereditary information |
| III | Vitamin | Peptide-linked amino acid residues in every case | Accessory dietary requirement |
| IV | Carbohydrate | Linked glucose units | Structural support in plants |
Which set contains all the rows that are consistent in their structural descriptions and possible biological roles?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. I, II and IV only
ⓓ. II, III and IV only
Correct Answer: I, II and IV only
Explanation: Row I is consistent because proteins contain amino acid residues joined by peptide linkages. Many proteins function as enzymes and therefore catalyse biological reactions. This demonstrates that the protein class includes molecules with dynamic functions rather than only structural functions. Row II is consistent because nucleic acids are polynucleotides. DNA, a nucleic acid, stores hereditary information and is involved in transmitting genetic characteristics. Row III contains a structural error. Vitamins are accessory food factors required for normal biological functioning, but they are not universally polymers of amino acids. Their dietary role does not establish a common peptide-based constitution. Row IV is consistent because certain carbohydrates are polymers of glucose units and have structural functions. Cellulose is a glucose-based polysaccharide that contributes to plant cell-wall structure. The same broad carbohydrate class also contains energy-storage molecules, demonstrating that one chemical class can have different biological roles. Consequently, the correct rows are I, II and IV, while Row III incorrectly assigns a universal protein-like structure to vitamins.
9. In a plant, starch is accumulated as a reserve material while cellulose contributes to the rigidity of cell walls. Both substances belong to the carbohydrate class. Which inference follows from this comparison?
ⓐ. Carbohydrate classification depends only on whether a substance is used for energy storage.
ⓑ. Carbohydrates can have different biological functions even when their constituent monosaccharide is the same.
ⓒ. Cellulose cannot be classified as a carbohydrate because, unlike starch, it is insoluble in water.
ⓓ. Starch and cellulose must have identical structures because both contain glucose units.
Correct Answer: Carbohydrates can have different biological functions even when their constituent monosaccharide is the same.
Explanation: Starch and cellulose are both polysaccharides composed of glucose-derived units. Nevertheless, they perform substantially different functions in plants. Starch is principally associated with carbohydrate storage and can serve as a reserve from which glucose becomes available. Cellulose, on the other hand, is a major structural constituent of plant cell walls. This comparison establishes that membership of the carbohydrate class does not determine one exclusive biological role. It also demonstrates that having the same general constituent monosaccharide does not guarantee identical molecular structure. The glucose units in starch and cellulose are connected through different glycosidic arrangements, which contributes to their distinct properties. Structural support is not a function restricted to proteins, just as energy storage is not the only function of carbohydrates. A chemically meaningful interpretation must consider both molecular arrangement and biological function. The correct conclusion is therefore that related carbohydrates can perform different roles despite sharing glucose as their constituent unit.
10. Two proteins are isolated from an organism. Protein P forms part of a supporting biological structure, while protein Q accelerates a specific chemical reaction. Which statement best accounts for this difference?
ⓐ. P must contain amino acids, whereas Q must contain nucleotides.
ⓑ. P must be a polysaccharide, whereas Q must be a protein.
ⓒ. Both must have identical biological functions because both contain peptide bonds.
ⓓ. Both may be proteins, but their molecular organisation allows different biological functions.
Correct Answer: Both may be proteins, but their molecular organisation allows different biological functions.
Explanation: Proteins form a broad class of biomolecules constructed from amino acid residues. A common chemical constitution does not require every protein to perform the same biological function. Some proteins contribute to mechanical strength, structural organisation or maintenance of biological tissues. Others act as enzymes and accelerate specific chemical reactions. Therefore, P and Q can both belong to the protein class despite performing different roles. Their structural organisation and molecular interactions are important in determining these roles. In enzymes, the arrangement of the protein structure enables selective interaction with particular reactants. In structural proteins, molecular organisation supports stability and mechanical functions. The presence of peptide linkages establishes a fundamental structural relationship between proteins, not functional identity. It would also be incorrect to classify a catalytic protein as a nucleic acid merely because its function differs from that of a supporting protein. The example illustrates how molecular structure produces functional diversity within a single biomolecular class.
11. DNA contains a pentose sugar as part of its nucleotide units. A student therefore concludes that DNA should be classified as a carbohydrate rather than a nucleic acid. Which response correctly evaluates the conclusion?
ⓐ. The conclusion is incorrect because DNA is a polynucleotide whose identity depends on its complete constituent units and their linkages.
ⓑ. The conclusion is correct because every molecule containing a sugar component is classified as a carbohydrate.
ⓒ. The conclusion is correct because the sugar component is responsible for the entire hereditary function of DNA.
ⓓ. The conclusion is incorrect because DNA contains no carbohydrate-derived component in its structure.
Correct Answer: The conclusion is incorrect because DNA is a polynucleotide whose identity depends on its complete constituent units and their linkages.
Explanation: The student's conclusion confuses the presence of a constituent group with the chemical classification of the complete molecule. DNA contains 2-deoxyribose, which is a pentose sugar derivative. However, this sugar is only one component of each DNA nucleotide. A nucleotide also contains a nitrogenous base and a phosphate component. DNA consists of many such nucleotide units connected through a polynucleotide backbone. Consequently, its polymeric organisation is characteristic of a nucleic acid rather than an ordinary carbohydrate polymer. The presence of sugar does not convert the entire macromolecule into a carbohydrate. DNA also performs the important biological function of storing hereditary information. Its nucleotide sequence is fundamental to this role, whereas a simple carbohydrate classification would fail to describe its constitution adequately. This distinction illustrates why biomolecules must be identified through their overall structure and organisation rather than through one constituent alone.
12. An individual receives an adequate supply of energy-yielding carbohydrates but has an insufficient intake of a particular essential vitamin. Which conclusion is most scientifically appropriate?
ⓐ. Vitamin deficiency is impossible because carbohydrates provide sufficient dietary energy.
ⓑ. The deficient vitamin must normally function as a major storage carbohydrate.
ⓒ. Normal biological functioning may be disturbed despite adequate carbohydrate-derived energy.
ⓓ. Vitamin intake can become limiting only when carbohydrate-derived energy is also insufficient.
Correct Answer: Normal biological functioning may be disturbed despite adequate carbohydrate-derived energy.
Explanation: Carbohydrates are important sources of energy and serve several additional biological functions. Vitamins, however, are required for normal functioning even though their dietary quantities are generally much smaller. Their biological importance cannot be assessed merely from the mass consumed or their contribution to energy supply. An organism may therefore receive sufficient carbohydrate energy while lacking an essential dietary factor. Vitamin deficiency can interfere with normal biological activities and produce characteristic deficiency conditions. The presence of adequate carbohydrates does not automatically replace the chemical roles performed by vitamins. Similarly, vitamins are not classified as storage carbohydrates simply because both categories contribute to overall health. Their chemical structures and biological functions are different. The key principle is that different biomolecular classes contribute complementary requirements to living systems. Adequate energy availability is necessary for many functions but does not, by itself, ensure that every essential molecular requirement has been satisfied.
13. In a biological system, substance X accelerates the conversion of a particular substrate into products without being consumed in the overall reaction. Substance Y is released as a chemical messenger and influences the activity of another group of cells. Which identification is most consistent with these observations?
ⓐ. X—Hormone; Y—Enzyme
ⓑ. X—Enzyme; Y—Hormone
ⓒ. X—Vitamin; Y—Polysaccharide
ⓓ. X—Nucleic acid; Y—Storage carbohydrate
Correct Answer: X—Enzyme; Y—Hormone
Explanation: Substance X exhibits the defining behaviour of a catalyst because it accelerates a chemical transformation without undergoing net consumption. In living systems, such catalytic substances are called enzymes. Enzymes commonly act with considerable specificity towards particular substrates or reactions. Their action changes the rate at which a reaction approaches its products rather than supplying the reactants as a stoichiometric reagent. Substance Y is distinguished by a different observation: it carries a chemical message that influences biological activity in other cells. This is characteristic of hormonal regulation. A hormone is classified through its signalling role rather than by the requirement that it directly catalyse a reaction. Some hormones and enzymes may possess related chemical constitutions, including protein or polypeptide structures, but their functions remain distinguishable. The decisive evidence for X is catalytic activity, whereas the decisive evidence for Y is chemical communication. Thus, identifying biological roles requires attention to what a substance does, not merely to the fact that it participates in living processes.
14. Consider a biological system in which stored glycogen is broken down to provide glucose when required. The breakdown is accelerated by a suitable enzyme, while hormonal signals contribute to the regulation of glucose availability.
Which statement correctly distinguishes the three molecular roles involved?
ⓐ. Glycogen is a catalyst, the enzyme is an energy reserve, and the hormone is the glucose product.
ⓑ. Glycogen is an information polymer, the enzyme is a signalling molecule, and the hormone is a carbohydrate.
ⓒ. Glycogen is an energy reserve, the enzyme is a chemical messenger, and the hormone is the reaction substrate.
ⓓ. Glycogen is an energy reserve, the enzyme is a catalyst, and the hormone participates in chemical signalling.
Correct Answer: Glycogen is an energy reserve, the enzyme is a catalyst, and the hormone participates in chemical signalling.
Explanation: \(\textbf{Stored molecular material:}\)
Glycogen is a polysaccharide composed of glucose units and serves as a storage carbohydrate, particularly in animals. Its biological role is to provide a reserve from which glucose can become available when required. This identifies glycogen as the stored molecular material rather than as the substance responsible for catalysing its own breakdown.
\(\textbf{Catalytic role:}\)
The breakdown of glycogen involves chemical transformations accelerated by enzymes. An enzyme increases the reaction rate through catalytic action and is not consumed in the overall catalytic process. The enzyme is therefore distinguished from the stored carbohydrate, which undergoes chemical conversion.
\(\textbf{Regulatory role:}\)
Hormones act as chemical messengers and help coordinate biological responses. Hormonal signalling can influence processes that determine glucose availability, but the hormone is not automatically the substrate or the catalyst of the particular chemical conversion. Thus, regulation and catalysis are separate functional roles.
\(\textbf{Functional consistency:}\)
The system requires a distinction between the material being used, the catalyst facilitating its transformation and the messenger influencing biological activity. The fact that all three contribute to glucose availability does not make their chemical functions interchangeable. Glycogen is the reserve, the enzyme accelerates the conversion, and the hormone contributes to its regulation. This coordinated arrangement illustrates how different biomolecular classes participate in a single biological requirement.
15. Consider the following Assertion and Reason.
Assertion (A): A polypeptide hormone cannot replace an enzyme merely because both substances contain amino acid residues.
Reason (R): Catalytic activity and chemical signalling are different biological functions, and a common type of constituent unit does not establish identical molecular action.
Choose the correct option.
ⓐ. Both A and R are true, and R is the correct explanation of A.
ⓑ. Both A and R are true, but R is not the correct explanation of A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R is the correct explanation of A.
Explanation: The Assertion is true because chemical similarity does not guarantee functional interchangeability. A polypeptide hormone and a protein enzyme may both be constructed from amino acid residues. However, their biological activities depend on their particular molecular organisation and interactions. An enzyme is distinguished by its ability to accelerate a specific chemical reaction. A hormone is distinguished by its role in conveying a regulatory chemical message. Replacing an enzyme with an unrelated polypeptide hormone would not automatically provide the catalytic arrangement required for the original reaction. The Reason is also true because constituent-unit identity alone does not establish identical biological activity. Peptide linkages reveal the broad chemical constitution of the two molecules, but they do not uniquely specify their functions. Insulin provides an example of a polypeptide hormone whose identity as an amino-acid-based molecule does not make its primary biological role enzymatic. An enzyme requires the appropriate structure and chemical interactions for its catalytic action. Therefore, the Reason correctly explains the Assertion by separating common chemical constitution from specific biological function.
16. A biological system is described through the following connected processes.
A cell contains DNA carrying hereditary information. RNA participates in the synthesis of a protein that functions as an enzyme. The enzyme accelerates the conversion of a carbohydrate substrate into simpler products. A hormone contributes to the regulation of the overall biological activity.
Which conclusion best preserves the chemical identities and functional relationships of the substances involved?
ⓐ. DNA acts as the carbohydrate substrate, RNA serves as the catalyst, and the hormone provides the enzyme's amino acid residues.
ⓑ. DNA directly catalyses carbohydrate breakdown, RNA acts as the storage carbohydrate, and the protein transmits hormonal signals.
ⓒ. DNA stores the hereditary information, RNA participates in protein formation, and the resulting enzyme serves as the chemical messenger.
ⓓ. DNA stores hereditary information, RNA participates in protein synthesis, the enzyme catalyses the conversion, and the hormone provides chemical signalling.
Correct Answer: DNA stores hereditary information, RNA participates in protein synthesis, the enzyme catalyses the conversion, and the hormone provides chemical signalling.
Explanation: \(\textbf{Identification of hereditary information:}\)
DNA is a nucleic acid composed of nucleotide units, and one of its principal biological functions is the storage of hereditary information. Its participation in determining which proteins are synthesised does not mean that DNA itself acts as the catalyst in every reaction involving those proteins.
\(\textbf{Connection with protein formation:}\)
RNA participates in the expression of genetic information and the synthesis of proteins. The resulting protein is constructed from amino acid residues rather than nucleotide units. This distinction is essential because the information-carrying nucleic acids and the protein product belong to different biomolecular classes.
\(\textbf{Catalytic consequence:}\)
The protein described in the passage functions as an enzyme. Its catalytic role is to accelerate the conversion of the specified carbohydrate substrate into simpler products. The carbohydrate is the substance undergoing chemical conversion, whereas the enzyme facilitates the transformation without being consumed in the overall reaction.
\(\textbf{Regulatory contribution:}\)
The hormone contributes through chemical signalling. This role is different from both the storage of hereditary information and the direct catalytic acceleration of the carbohydrate conversion. Hormonal regulation may influence biological activity without making the hormone itself the enzyme or the substrate.
\(\textbf{Integrated conclusion:}\)
The correct interpretation must preserve the distinction between molecular information, protein synthesis, catalysis and chemical communication. These processes are connected but are not chemically identical. DNA provides hereditary information, RNA participates in protein synthesis, the enzyme carries out catalytic action, and the hormone contributes to coordination. The sequence demonstrates how chemically distinct biomolecules cooperate to support the functioning of a living system.
17. Consider the following observations about two organic compounds:
Compound P is acetic acid, \(\mathrm{CH_3COOH}\), whose molecular formula can be represented as \(\mathrm{C_2(H_2O)_2}\).
Compound Q is rhamnose, \(\mathrm{C_6H_{12}O_5}\), which is a carbohydrate but does not satisfy the general hydrate-of-carbon formula.
Which conclusion follows from these observations?
ⓐ. The hydrate-of-carbon formula is necessary but insufficient for carbohydrate identification.
ⓑ. The hydrate-of-carbon formula is sufficient but unnecessary for carbohydrate identification.
ⓒ. The hydrate-of-carbon formula is neither necessary nor sufficient for carbohydrate identification.
ⓓ. The hydrate-of-carbon formula correctly identifies carbohydrates only when they are monosaccharides.
Correct Answer: The hydrate-of-carbon formula is neither necessary nor sufficient for carbohydrate identification.
Explanation: The historical name carbohydrate arose because many carbohydrates approximately follow the formula \(\mathrm{C_x(H_2O)_y}\). Glucose, for example, has the molecular formula \(\mathrm{C_6H_{12}O_6}\), which can be expressed as \(\mathrm{C_6(H_2O)_6}\). However, fitting this formula does not establish that a compound is a carbohydrate. Acetic acid has the molecular formula \(\mathrm{C_2H_4O_2}\), which also fits the hydrate-of-carbon representation, but its chemical structure does not satisfy the carbohydrate definition. Therefore, satisfying the empirical relationship is not sufficient for carbohydrate classification. Conversely, rhamnose is an accepted carbohydrate with molecular formula \(\mathrm{C_6H_{12}O_5}\), which does not fit the historical formula. This demonstrates that satisfying the formula is not necessary either. The chemically useful definition involves optically active polyhydroxy aldehydes, polyhydroxy ketones or compounds yielding such units on hydrolysis. Chemical classification must therefore rely on functional groups and molecular constitution rather than an empirical formula alone.
18. Three pure carbohydrate samples P, Q and R are subjected separately to complete hydrolysis under appropriate conditions.
P cannot be hydrolysed into simpler carbohydrate units.
One molecule of Q produces four monosaccharide units.
One molecule of R produces a large number of monosaccharide units.
Which classification is correct?
ⓐ. P—Monosaccharide; Q—Oligosaccharide; R—Polysaccharide
ⓑ. P—Monosaccharide; Q—Polysaccharide; R—Oligosaccharide
ⓒ. P—Disaccharide; Q—Oligosaccharide; R—Polysaccharide
ⓓ. P—Oligosaccharide; Q—Monosaccharide; R—Polysaccharide
Correct Answer: P—Monosaccharide; Q—Oligosaccharide; R—Polysaccharide
Explanation: Carbohydrates are classified into monosaccharides, oligosaccharides and polysaccharides primarily according to their behaviour on hydrolysis. A monosaccharide cannot undergo hydrolysis to produce simpler carbohydrate units. Since P satisfies this condition, it is classified as a monosaccharide. Oligosaccharides yield two to ten monosaccharide units on complete hydrolysis. Q produces four monosaccharide units and therefore belongs to the oligosaccharide category, specifically a tetrasaccharide. Polysaccharides produce a large number of monosaccharide units when completely hydrolysed. R consequently belongs to the polysaccharide category. The classification depends on the number of constituent monosaccharide units, not on whether those units are chemically identical. For example, a disaccharide can produce two identical monosaccharides or two different monosaccharides. Thus, the hydrolysis evidence is sufficient to establish the stated three-category classification without requiring the individual sugar identities.
19. A student examines three carbohydrate samples and records the following observations:
| Sample | Complete hydrolysis | Fehling's test before hydrolysis |
| P | No simpler carbohydrate units formed | Negative |
| Q | Two monosaccharide units formed | Negative |
| R | Two monosaccharide units formed | Positive |
Assuming pure samples and correctly performed tests, which interpretation is most appropriate?
ⓐ. All three observations are consistent with ordinary carbohydrate classification.
ⓑ. P is inconsistent, whereas Q and R are chemically possible.
ⓒ. Q is inconsistent because every disaccharide must be reducing.
ⓓ. R is inconsistent because disaccharides cannot reduce Fehling's solution.
Correct Answer: P is inconsistent, whereas Q and R are chemically possible.
Explanation: The first step is to identify the hydrolysis-based category of each sample. P cannot be hydrolysed into simpler carbohydrate units and is therefore classified as a monosaccharide. According to the standard NCERT classification, all monosaccharides, whether aldoses or ketoses, are reducing sugars. Consequently, a pure ordinary monosaccharide should give a positive Fehling's test under the specified conditions. The negative result recorded for P is therefore inconsistent with its classification. Both Q and R produce two monosaccharide units on hydrolysis and are disaccharides. However, disaccharides are not universally reducing or universally non-reducing. Their reducing behaviour depends on the availability of an appropriate free anomeric centre capable of generating an open-chain carbonyl-containing form. A non-reducing disaccharide can therefore give a negative test, as observed for Q. A reducing disaccharide can give a positive test, as observed for R. The apparent contradiction is confined to P, while the differing observations for Q and R are chemically possible.
20. Consider the following Assertion and Reason.
Assertion (A): A ketose monosaccharide can reduce Fehling's solution even though its open-chain structure contains a ketonic rather than an aldehydic carbonyl group.
Reason (R): Under the alkaline conditions of Fehling's test, suitable ketoses can undergo enediol-mediated isomerisation to aldose forms.
Choose the correct option.
ⓐ. Both A and R are true, but R is not the correct explanation of A.
ⓑ. A is true, but R is false.
ⓒ. A is false, but R is true.
ⓓ. Both A and R are true, and R is the correct explanation of A.
Correct Answer: Both A and R are true, and R is the correct explanation of A.
Explanation: The Assertion is true because reducing-sugar behaviour is not restricted to monosaccharides that are classified as aldoses. Fructose is a familiar ketose monosaccharide and is also a reducing sugar. Its open-chain structure contains a ketonic carbonyl group, which distinguishes it structurally from glucose. A simplistic rule that only molecules initially containing aldehyde groups can reduce Fehling's solution is therefore incorrect. The Reason identifies the chemical explanation for this apparent exception. Fehling's solution is alkaline, and suitable ketoses can undergo rearrangement through an enediol intermediate under these conditions. This permits interconversion between ketose and aldose forms. The aldose forms can undergo oxidation while reducing the copper(II) species present in the reagent. Thus, the observed reducing behaviour is compatible with the ketonic identity of the starting monosaccharide. The Assertion and Reason are both correct, and the Reason explains why a ketose can give a positive reducing-sugar test.
21. Consider the following statements about carbohydrates.
Statement I: Every organic compound having a sweet taste must be a carbohydrate.
Statement II: Rhamnose demonstrates that a carbohydrate need not satisfy the historical hydrate-of-carbon formula.
Statement III: Polysaccharides such as starch and cellulose are generally classified as non-sugars because they are not sweet in taste.
Statement IV: Every oligosaccharide is non-reducing because its monosaccharide units are joined by glycosidic bonds.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and III only
ⓒ. I, III and IV only
ⓓ. II, III and IV only
Correct Answer: II and III only
Explanation: Statement I is incorrect because sweetness is a sensory property and not a sufficient chemical criterion for carbohydrate classification. Some carbohydrates are sweet, but this does not establish that every sweet-tasting organic substance is a carbohydrate. Statement II is correct because rhamnose has molecular formula \(\mathrm{C_6H_{12}O_5}\) and is a recognised carbohydrate despite not satisfying the historical hydrate-of-carbon formula. It is therefore an important counterexample to the use of that formula as a compulsory classification rule. Statement III is correct because starch and cellulose are polysaccharides and are not sweet in taste. In NCERT terminology, polysaccharides are consequently also referred to as non-sugars. This use of the term does not remove them from the carbohydrate class. Statement IV is incorrect because the presence of a glycosidic bond does not necessarily eliminate reducing behaviour. Some oligosaccharides retain a free anomeric centre, allowing an open-chain carbonyl-containing form to become available. Therefore, an oligosaccharide may be reducing or non-reducing depending on its linkage arrangement. Statements II and III are the only correct statements.
22. A pure carbohydrate P undergoes complete hydrolysis according to the following quantitative observations:
A \(0.12\ \mathrm{mol}\) sample of P produces \(0.36\ \mathrm{mol}\) of glucose and \(0.24\ \mathrm{mol}\) of fructose. No other monosaccharide is formed, and each molecule of P undergoes complete hydrolysis.
Which conclusion about P is correct?
ⓐ. P is a trisaccharide containing two glucose units and one fructose unit.
ⓑ. P is a tetrasaccharide containing three glucose units and one fructose unit.
ⓒ. P is a pentasaccharide containing three glucose units and two fructose units.
ⓓ. P is a hexasaccharide containing four glucose units and two fructose units.
Correct Answer: P is a pentasaccharide containing three glucose units and two fructose units.
Explanation: \(\textbf{Hydrolysis information:}\)
The sample contains \(0.12\ \mathrm{mol}\) of pure carbohydrate P.
Complete hydrolysis produces two monosaccharide species, glucose and fructose.
\(\textbf{Glucose-unit accounting:}\)
The number of glucose units per molecule of P is obtained from the mole ratio:
\[
n_{\mathrm{glucose}}=\frac{0.36\ \mathrm{mol}}{0.12\ \mathrm{mol}}
\]
\[
n_{\mathrm{glucose}}=3
\]
Each molecule of P therefore supplies three glucose units.
\(\textbf{Fructose-unit accounting:}\)
The corresponding number of fructose units is:
\[
n_{\mathrm{fructose}}=\frac{0.24\ \mathrm{mol}}{0.12\ \mathrm{mol}}
\]
\[
n_{\mathrm{fructose}}=2
\]
Each molecule of P consequently supplies two fructose units.
\(\textbf{Total constituent units:}\)
The total number of monosaccharide units is:
\[
n_{\mathrm{total}}=3+2=5
\]
A carbohydrate yielding five monosaccharide units on complete hydrolysis is a pentasaccharide and belongs to the oligosaccharide category.
The quantitative composition does not independently reveal the order or precise glycosidic connectivity of those units.
\(\textbf{Final answer:}\)
\[
\boxed{3\ \text{glucose units}+2\ \text{fructose units}=5\ \text{monosaccharide units}}
\]
23. A cyclic monosaccharide exists predominantly in a ring form in aqueous solution. Its cyclic structure contains a free hemiacetal group, while the concentration of its open-chain aldehydic form is comparatively small.
Which prediction is consistent with these observations?
ⓐ. The monosaccharide can reduce Tollens' reagent because ring opening replenishes its reactive open-chain form.
ⓑ. The monosaccharide cannot reduce Tollens' reagent because its predominant structure is cyclic.
ⓒ. The monosaccharide becomes reducing only after hydrolysis of a glycosidic bond joining two sugar units.
ⓓ. The monosaccharide cannot form an open-chain carbonyl-containing structure once cyclisation has occurred.
Correct Answer: The monosaccharide can reduce Tollens' reagent because ring opening replenishes its reactive open-chain form.
Explanation: The essential distinction is between the predominant molecular form and the existence of a reactive form in equilibrium with it. A cyclic monosaccharide containing a free hemiacetal group can undergo ring opening to regenerate its open-chain carbonyl-containing structure. The cyclic structure may predominate in solution without completely eliminating the open-chain species. When an oxidising reagent reacts with the open-chain aldehydic form, some of that form is consumed. The equilibrium can respond by producing additional open-chain molecules from the cyclic form. Consequently, a small equilibrium concentration of the reactive aldehydic species can still support observable reducing behaviour. Tollens' reagent is reduced during the corresponding oxidation process. The mere presence of a ring therefore does not classify a carbohydrate as non-reducing. Hydrolysis of a glycosidic bond between sugar units is not required for an ordinary free monosaccharide hemiacetal to show this behaviour. The decisive structural feature is the availability of an anomeric centre capable of opening to the carbonyl-containing form. This explains why cyclic structure and reducing behaviour are chemically compatible.
24. Two disaccharides X and Y contain monosaccharide units capable of giving positive reducing-sugar tests when liberated by hydrolysis.
In X, the glycosidic bond directly connects the anomeric carbon of the first monosaccharide to the anomeric carbon of the second monosaccharide.
In Y, the glycosidic bond connects the anomeric carbon of the first monosaccharide to a non-anomeric hydroxyl position of the second monosaccharide, leaving the second anomeric centre free.
Assuming complete hydrolysis under suitable conditions, which pattern is expected?
ⓐ. X is reducing before hydrolysis; Y is non-reducing before hydrolysis; both become reducing after hydrolysis.
ⓑ. Both are non-reducing before hydrolysis; only Y gives reducing products after hydrolysis.
ⓒ. Both are reducing before hydrolysis; both become non-reducing after hydrolysis.
ⓓ. X is non-reducing before hydrolysis; Y is reducing before hydrolysis; both give reducing products after hydrolysis.
Correct Answer: X is non-reducing before hydrolysis; Y is reducing before hydrolysis; both give reducing products after hydrolysis.
Explanation: \(\textbf{Anomeric-centre analysis in X:}\)
Both anomeric centres participate directly in the glycosidic linkage of X. Consequently, neither constituent sugar has a free anomeric centre available for the usual ring-opening process while the disaccharide remains intact. X is therefore non-reducing under the standard reducing-sugar classification.
\(\textbf{Anomeric-centre analysis in Y:}\)
In Y, only one anomeric centre participates in the glycosidic bond. The other anomeric centre remains free and can participate in equilibrium with an open-chain carbonyl-containing form. Y is consequently reducing even though it contains a glycosidic linkage.
\(\textbf{Effect of complete hydrolysis:}\)
Hydrolysis cleaves the glycosidic bonds in both disaccharides. This releases the constituent monosaccharide units and restores the corresponding free anomeric functionalities. The question specifies that the liberated monosaccharides are capable of giving positive reducing-sugar tests. Therefore, the products of complete hydrolysis of both X and Y are reducing.
\(\textbf{Consistency check:}\)
The number of monosaccharide units is the same in X and Y, so both remain disaccharides regardless of their original reducing character. Their different behaviour before hydrolysis results from the positions involved in glycosidic bonding. The chemical distinction is therefore structural rather than a consequence of different hydrolysis-based classifications.
25. A pure unknown carbohydrate gives a positive Tollens' test. A student concludes that the substance must be an aldose monosaccharide.
Which additional observation would most directly invalidate the student's complete identification?
ⓐ. The carbohydrate is soluble in water.
ⓑ. The carbohydrate contains several hydroxyl groups.
ⓒ. Complete hydrolysis produces two monosaccharide units.
ⓓ. The carbohydrate exhibits optical activity.
Correct Answer: Complete hydrolysis produces two monosaccharide units.
Explanation: A positive Tollens' test establishes reducing behaviour under the reaction conditions, but it does not uniquely identify an aldose monosaccharide. Aldose monosaccharides are reducing sugars, yet ketose monosaccharides can also show reducing behaviour. Moreover, certain disaccharides retain a free anomeric centre and are reducing. The student's identification therefore makes two unsupported assumptions: that the sugar must be an aldose and that it must be a monosaccharide. Complete hydrolysis producing two monosaccharide units directly establishes that the original carbohydrate is a disaccharide. This observation conclusively disproves the monosaccharide part of the identification. It remains compatible with the original positive Tollens' test because reducing disaccharides exist. Water solubility, hydroxyl-group presence and optical activity do not independently establish the number of constituent saccharide units. The general lesson is that a reducing-sugar test provides information about chemical reactivity rather than a unique hydrolysis classification. Reliable carbohydrate identification may require combining reaction behaviour with hydrolysis evidence.
26. Two pure carbohydrates P and Q each produce exactly two monosaccharide molecules per molecule on complete hydrolysis.
The products of P are two glucose molecules.
The products of Q are one glucose molecule and one fructose molecule.
Which conclusion is justified without additional structural evidence?
ⓐ. P must be reducing, whereas Q must be non-reducing.
ⓑ. Both P and Q are disaccharides, but product identities alone cannot establish reducing behaviour.
ⓒ. P must be non-reducing, whereas Q must be reducing.
ⓓ. P and Q must have identical glycosidic linkages because both produce two monosaccharide units.
Correct Answer: Both P and Q are disaccharides, but product identities alone cannot establish reducing behaviour.
Explanation: The number of constituent monosaccharide units identifies the hydrolysis class of a carbohydrate. Since P and Q each produce two monosaccharide molecules, both are disaccharides. The hydrolysis evidence also establishes that P is composed of glucose units, whereas Q contains glucose and fructose units. However, the identities of the constituent monosaccharides do not independently reveal the positions participating in the glycosidic linkage. Reducing behaviour depends on whether an appropriate free anomeric centre remains in the intact carbohydrate. A linkage involving both anomeric centres can eliminate ordinary reducing behaviour. A linkage involving only one anomeric centre can leave another anomeric centre capable of producing an open-chain reactive form. Therefore, two disaccharides cannot be assigned identical reducing properties merely because each yields two monosaccharide units. Similarly, the fact that P contains identical constituent units does not by itself prove that it must be reducing. Additional structural or chemical evidence is required to establish the reducing character of the intact molecules. Hydrolysis composition and reducing behaviour thus reveal different aspects of carbohydrate chemistry.
27. A pure oligosaccharide P is constructed from identical hexose units, each having molecular formula \(\mathrm{C_6H_{12}O_6}\) and molar mass \(180\ \mathrm{g\,mol^{-1}}\). Its molar mass is \(666\ \mathrm{g\,mol^{-1}}\). Formation of each glycosidic bond releases one molecule of water, and all the units are connected in a single acyclic chain.
How many monosaccharide units and glycosidic bonds are present in one molecule of P?
ⓐ. Four monosaccharide units and three glycosidic bonds
ⓑ. Four monosaccharide units and four glycosidic bonds
ⓒ. Three monosaccharide units and two glycosidic bonds
ⓓ. Five monosaccharide units and four glycosidic bonds
Correct Answer: Four monosaccharide units and three glycosidic bonds
Explanation: \(\textbf{Constituent-unit relation:}\)
Let the oligosaccharide contain \(n\) identical hexose units.
Each free hexose has molar mass:
\[
M_{\mathrm{hexose}}=180\ \mathrm{g\,mol^{-1}}
\]
The unlinked total molar mass of \(n\) hexose molecules would be:
\[
M_{\mathrm{unlinked}}=180n
\]
\(\textbf{Condensation accounting:}\)
For a single acyclic chain containing \(n\) constituent units, the number of glycosidic linkages is:
\[
N_{\mathrm{bonds}}=n-1
\]
Each linkage is formed with the elimination of one water molecule.
Therefore, the molar mass of the resulting carbohydrate is:
\[
M=180n-18(n-1)
\]
\(\textbf{Determination of chain length:}\)
Substituting the supplied molar mass:
\[
666=180n-18n+18
\]
\[
666=162n+18
\]
\[
648=162n
\]
\[
n=\frac{648}{162}=4
\]
\(\textbf{Glycosidic-bond count:}\)
The number of glycosidic linkages is:
\[
N_{\mathrm{bonds}}=4-1=3
\]
\(\textbf{Chemical verification:}\)
The mass of four free hexose molecules is:
\[
4\times180=720\ \mathrm{g\,mol^{-1}}
\]
Three condensation reactions eliminate:
\[
3\times18=54\ \mathrm{g\,mol^{-1}}
\]
The resulting molar mass is:
\[
720-54=666\ \mathrm{g\,mol^{-1}}
\]
This agrees with the given molar mass and confirms the chain-length calculation.
\(\textbf{Final answer:}\)
\[
\boxed{4\ \text{monosaccharide units and }3\ \text{glycosidic bonds}}
\]
28. Three pure substances have the following properties:
| Substance | Chemical observation | Hydrolysis behaviour |
| P | Sweet-tasting organic compound without carbohydrate-type polyhydroxy carbonyl functionality | Does not produce monosaccharides |
| Q | Non-sweet carbohydrate polymer | Produces numerous glucose units |
| R | Sweet carbohydrate | Produces two monosaccharide units |
Which interpretation is consistent with chemical carbohydrate classification?
ⓐ. P and R are carbohydrates because both are sweet.
ⓑ. Q cannot be a carbohydrate because it is not sweet.
ⓒ. Only R is a carbohydrate because it produces a small number of hydrolysis products.
ⓓ. Q and R are carbohydrates, while sweetness alone does not establish the identity of P.
Correct Answer: Q and R are carbohydrates, while sweetness alone does not establish the identity of P.
Explanation: Carbohydrates are classified chemically rather than solely according to taste. P is described as sweet but lacks the relevant carbohydrate-type structural characteristics and does not yield monosaccharides on hydrolysis. Sweetness alone is therefore insufficient to classify P as a carbohydrate. Q is explicitly a carbohydrate polymer that produces numerous glucose units on complete hydrolysis. This behaviour is characteristic of a polysaccharide. Polysaccharides such as starch and cellulose are generally not sweet, so lack of sweetness is not evidence against carbohydrate identity. R produces two monosaccharide units on hydrolysis and therefore belongs to the disaccharide class. Its sweet taste is compatible with the familiar properties of several common disaccharides, but its classification is established by chemical constitution and hydrolysis. These observations demonstrate that the terms sugar and carbohydrate are related but not interchangeable with the simple description sweet substance. The number of monosaccharide units obtained on hydrolysis also does not determine whether a carbohydrate must be sweet. Thus, Q and R are carbohydrates despite their different sensory properties and hydrolysis behaviour.
29. A carbohydrate P is initially non-reducing and produces two reducing monosaccharides on complete hydrolysis. A student makes the following deductions:
Statement I: P must belong to the oligosaccharide class.
Statement II: The non-reducing character of P proves that its constituent monosaccharides are individually non-reducing.
Statement III: Hydrolysis can change the observed reducing behaviour by releasing free anomeric centres.
Statement IV: The negative reducing test on P proves that its molecule contains no oxygen-bearing functional groups.
Which statements are correct?
ⓐ. I and III only
ⓑ. II and IV only
ⓒ. I, II and III only
ⓓ. II, III and IV only
Correct Answer: I and III only
Explanation: Statement I is correct because P produces exactly two monosaccharides on complete hydrolysis. It is therefore a disaccharide, which belongs to the oligosaccharide class. Statement II is incorrect because the reducing behaviour of an intact disaccharide is not necessarily identical to that of its free constituent monosaccharides. When the anomeric centres of both units participate in a glycosidic bond, the disaccharide may be non-reducing even though the liberated monosaccharides are reducing. Statement III is correct because hydrolysis cleaves the glycosidic linkage and can restore free anomeric centres. These centres allow the constituent monosaccharides to access carbonyl-containing forms responsible for reducing behaviour. Statement IV is incorrect because failure to reduce Tollens' reagent or Fehling's solution does not imply the absence of oxygen-containing functional groups. Non-reducing carbohydrates still contain numerous oxygen-bearing structural features, including hydroxyl groups and glycosidic linkages. The negative test establishes the absence of the relevant reducing behaviour under the stated conditions, not the absence of oxygen in the molecule. Consequently, Statements I and III are correct, while Statements II and IV incorrectly extend the reducing-test result beyond what it proves.
30. Two carbohydrates P and Q are compared. Both give positive Fehling's tests.
P cannot be hydrolysed into simpler carbohydrate units.
Q gives two monosaccharide units on complete hydrolysis.
Which statement correctly describes the relationship between hydrolysis classification and reducing behaviour?
ⓐ. Both P and Q must be monosaccharides because both reduce Fehling's solution.
ⓑ. P is a monosaccharide and Q is a reducing disaccharide; the same reducing behaviour can occur in different hydrolysis classes.
ⓒ. P is a disaccharide and Q is a monosaccharide because Q undergoes hydrolysis.
ⓓ. Both P and Q must be non-reducing because hydrolysis changes their molecular structures.
Correct Answer: P is a monosaccharide and Q is a reducing disaccharide; the same reducing behaviour can occur in different hydrolysis classes.
Explanation: Carbohydrate classification by hydrolysis and classification by reducing behaviour are based on different chemical criteria. P cannot be hydrolysed into simpler carbohydrate units and must therefore be a monosaccharide. Its positive Fehling's test is consistent with the fact that all ordinary monosaccharides are reducing sugars. Q produces two monosaccharide units on hydrolysis and is consequently a disaccharide. Its positive Fehling's test establishes that it is a reducing disaccharide. The two samples therefore belong to different hydrolysis classes even though both demonstrate reducing behaviour. The shared chemical test does not require identical molecular size or an identical number of constituent units. In a reducing disaccharide, an available free anomeric centre can permit the formation of an open-chain reactive species. In a monosaccharide, reducing behaviour similarly depends on accessible carbonyl chemistry under the test conditions. The key distinction is that reducing behaviour describes the ability to reduce an appropriate oxidising reagent, while hydrolysis classification describes the number of simpler carbohydrate units obtainable. Therefore, the two classification systems must be applied independently before their conclusions are combined.
31. An unknown pure carbohydrate X gives the following results:
Its molecular formula is \(\mathrm{C_{12}H_{22}O_{11}}\). Complete hydrolysis produces two monosaccharide units per molecule. The intact carbohydrate does not reduce Tollens' reagent, whereas the hydrolysis products give a positive reducing-sugar test.
Which conclusion is fully supported by the observations?
ⓐ. X is a non-reducing disaccharide whose hydrolysis releases reducing monosaccharide units.
ⓑ. X is a non-reducing monosaccharide that becomes reducing after ring opening.
ⓒ. X is a reducing disaccharide whose constituent monosaccharides are individually non-reducing.
ⓓ. X is a polysaccharide whose reducing behaviour disappears when glycosidic bonds are hydrolysed.
Correct Answer: X is a non-reducing disaccharide whose hydrolysis releases reducing monosaccharide units.
Explanation: \(\textbf{Classification from hydrolysis:}\)
The decisive first observation is that one molecule of X produces exactly two monosaccharide units on complete hydrolysis. This establishes its classification as a disaccharide. The given formula \(\mathrm{C_{12}H_{22}O_{11}}\) is also compatible with a disaccharide formed by condensation of two hexose units, although the formula alone cannot uniquely identify the substance.
\(\textbf{Reducing behaviour of the intact molecule:}\)
X does not reduce Tollens' reagent. Under the stated conditions, it is therefore classified as a non-reducing sugar. A chemically plausible structural explanation is that the glycosidic bond engages both relevant anomeric centres, preventing the formation of an accessible open-chain reducing form while X remains intact.
\(\textbf{Consequence of hydrolysis:}\)
Complete hydrolysis breaks the glycosidic linkage and releases the two monosaccharide units. These liberated monosaccharides possess the chemical ability to reduce the reagent under the specified conditions. Therefore, the reducing properties of the products need not match those of the original disaccharide.
\(\textbf{Limit of the structural inference:}\)
The observations support the disaccharide classification and the change in reducing behaviour. They do not independently establish the exact identities, stereochemical configurations or glycosidic positions of its constituent units. The distinction between evidence and assumption is important when interpreting carbohydrate reactions. The fully supported conclusion is that X is a non-reducing disaccharide producing reducing monosaccharides on hydrolysis.
32. Two monosaccharides P and Q have the following open-chain structures:
P: \(\mathrm{CHO-(CHOH)_3-CH_2OH}\)
Q: \(\mathrm{CH_2OH-CO-(CHOH)_2-CH_2OH}\)
The structures represent unbranched carbon chains, and each –CHOH unit contains one hydroxyl group.
Which statement correctly identifies both monosaccharides and their molecular relationship?
ⓐ. P is an aldohexose and Q is a ketopentose; they differ in molecular formula.
ⓑ. P is an aldopentose and Q is a ketohexose; they have identical carbonyl positions.
ⓒ. P is a ketopentose and Q is an aldopentose; they are functional-group isomers.
ⓓ. P is an aldopentose and Q is a ketopentose; they are functional-group isomers.
Correct Answer: P is an aldopentose and Q is a ketopentose; they are functional-group isomers.
Explanation: \(\textbf{Classification of P:}\)
The terminal –CHO group identifies aldehydic carbonyl functionality in the open-chain structure of P.
The carbon skeleton contains one aldehydic carbon, three –CHOH carbons and one terminal –CH₂OH carbon.
Therefore, P contains five carbon atoms and is classified as an aldopentose.
\(\textbf{Classification of Q:}\)
Q contains a ketonic carbonyl group within its carbon skeleton rather than a terminal aldehyde group.
Its structure contains two terminal –CH₂OH groups, one ketonic carbon and two –CHOH carbons.
The total carbon count is again five, so Q is a ketopentose.
\(\textbf{Molecular relationship:}\)
Counting the atoms in either structure gives the molecular formula \(\mathrm{C_5H_{10}O_5}\).
Both substances therefore have identical molecular formulas but different functional groups.
This establishes functional-group isomerism rather than an identical chemical identity.
The distinction cannot be determined from molecular formula alone because both an aldose and a ketose may share the same formula.
Carbon counting and carbonyl identification must be performed independently before the complete monosaccharide classification is assigned.
33. Two optically active monosaccharides P and Q belong to the D-series. P is an aldose and rotates plane-polarised light clockwise, whereas Q is a ketose and rotates it anticlockwise.
Which conclusion is consistent with both observations?
ⓐ. P and Q may both have D-configuration despite opposite signs of optical rotation.
ⓑ. Q must possess L-configuration because it is laevorotatory.
ⓒ. P must be an aldose because all dextrorotatory carbohydrates are aldoses.
ⓓ. P and Q must have opposite configurations because their optical rotations have opposite signs.
Correct Answer: P and Q may both have D-configuration despite opposite signs of optical rotation.
Explanation: The first distinction is between relative molecular configuration and experimentally observed optical rotation. The symbols D and L describe the relative configurations of carbohydrates with reference to glyceraldehyde. The signs (+) and (–) describe the direction in which a substance rotates plane-polarised light under specified conditions. A dextrorotatory compound gives a positive optical rotation, whereas a laevorotatory compound gives a negative optical rotation. These two systems of notation are not interchangeable. D-(+)-Glucose and D-(–)-fructose provide the familiar NCERT examples. Both belong to the D-series even though their optical rotations have opposite signs. Furthermore, the aldose or ketose identity of a monosaccharide depends on its carbonyl functionality, not on its optical rotation. Therefore, the clockwise rotation of P does not independently establish its aldose character. Similarly, the anticlockwise rotation of Q does not require L-configuration. The stated observations are entirely compatible with both molecules possessing D-configuration.
34. An open-chain aldopentose undergoes intramolecular addition of its C4 hydroxyl group to its C1 aldehydic carbon. No carbon atom is lost during this transformation.
Which structural consequence is expected?
ⓐ. A six-membered cyclic hemiacetal with C4 as the anomeric carbon
ⓑ. A five-membered cyclic hemiacetal with C1 as the anomeric carbon
ⓒ. A five-membered cyclic hemiketal with C4 as the anomeric carbon
ⓓ. A six-membered cyclic hemiketal with C1 as the anomeric carbon
Correct Answer: A five-membered cyclic hemiacetal with C1 as the anomeric carbon
Explanation: \(\textbf{Original carbonyl identity:}\)
An aldopentose contains five carbon atoms and possesses an aldehydic carbonyl group in its open-chain form. The carbonyl carbon is numbered C1 because it lies at the aldehydic end of the chain.
\(\textbf{Intramolecular addition:}\)
The question specifies that the hydroxyl group attached to C4 attacks the aldehydic carbon at C1. The oxygen of the attacking hydroxyl group becomes part of the newly formed ring. The cyclic path consequently contains C1, C2, C3, C4 and one oxygen atom.
\(\textbf{Ring and functional-group identification:}\)
The resulting ring therefore contains five members. Because the starting carbonyl compound is an aldehyde, the intramolecular addition produces a cyclic hemiacetal rather than a hemiketal.
\(\textbf{Anomeric-centre identification:}\)
The original aldehydic carbon C1 becomes the hemiacetal carbon in the cyclic structure. This carbon is known as the anomeric carbon because different configurations can arise at this position during ring formation. The fifth carbon of the original aldopentose remains outside the five-membered ring as part of the substituent attached to C4. Thus, the total molecular carbon count remains unchanged even though the number of carbon atoms included in the ring is smaller. The transformation connects carbonyl position, hydroxyl-group position, ring size and anomeric-carbon identity.
35. A Fischer projection of an aldohexose is drawn with its aldehyde group at the top and its terminal \(\mathrm{-CH_2OH}\) group at the bottom. The hydroxyl groups at C2, C3 and C4 are arranged differently from those in D-glucose, but the hydroxyl group at C5 remains on the right.
What can be concluded about this aldohexose?
ⓐ. It must be L-configured because its upper hydroxyl groups differ from D-glucose.
ⓑ. It must be dextrorotatory because its C5 hydroxyl group lies on the right.
ⓒ. It retains D-configuration, but its optical rotation cannot be predicted from this information alone.
ⓓ. It becomes a ketose because changing hydroxyl-group positions changes the carbonyl class.
Correct Answer: It retains D-configuration, but its optical rotation cannot be predicted from this information alone.
Explanation: The D/L designation of a monosaccharide is assigned from its relative configuration with respect to glyceraldehyde. In the conventional Fischer representation of an aldohexose, the aldehyde group is placed at the top of the carbon chain. The lowest asymmetric carbon is then the chiral carbon farthest from the aldehyde group. In an ordinary aldohexose, this is C5. If the hydroxyl group attached to C5 is on the right, the monosaccharide belongs to the D-series. Changing the configurations at C2, C3 or C4 can produce a different stereoisomer without necessarily altering the D designation. Such configurational differences can influence physical properties, including optical rotation. However, the sign of optical rotation cannot be assigned simply by examining the position of the lowest asymmetric carbon's hydroxyl group. The D designation does not guarantee dextrorotation. Moreover, rearranging the orientations of hydroxyl groups does not relocate the aldehydic carbonyl group. Therefore, the compound remains an aldohexose with D-configuration, while its optical-rotation sign remains undetermined from the stated information.
36. Two pure monosaccharides P and Q have the same molecular formula, \(\mathrm{C_6H_{12}O_6}\), and both form oximes with hydroxylamine.
P is oxidised by bromine water to a monocarboxylic acid without loss of carbon atoms.
Q is not similarly oxidised under the mild bromine-water conditions, but it gives a positive Fehling's test on heating.
Which identification is most consistent with these observations?
ⓐ. P is a ketohexose and Q is an aldohexose.
ⓑ. P and Q are both aldohexoses with different hydroxyl-group configurations.
ⓒ. P and Q are both ketohexoses with different optical rotations.
ⓓ. P is an aldohexose and Q is a ketohexose.
Correct Answer: P is an aldohexose and Q is a ketohexose.
Explanation: \(\textbf{Evidence from hydroxylamine:}\)
Hydroxylamine reacts with aldehydes and ketones to produce oximes. Therefore, oxime formation confirms carbonyl functionality but cannot independently distinguish an aldose from a ketose.
\(\textbf{Mild oxidation of P:}\)
Bromine water is a mild oxidising agent that can oxidise an aldehydic group to a carboxylic acid. P produces a monocarboxylic acid without losing carbon atoms, supporting the presence of an aldehydic carbonyl group. Since P contains six carbon atoms, it is classified as an aldohexose.
\(\textbf{Different behaviour of Q:}\)
Q does not undergo the corresponding aldehyde-to-acid oxidation under the specified mild bromine-water conditions. This is consistent with a ketonic rather than an aldehydic carbonyl group. Its positive Fehling's test does not contradict the ketose classification. Under alkaline conditions, a suitable ketose can undergo enediol-mediated rearrangement to aldose forms that reduce the reagent.
\(\textbf{Combined interpretation:}\)
The identical molecular formulas establish that P and Q may be functional-group isomers. Their different behaviours toward bromine water provide the decisive carbonyl distinction. The Fehling's test result must be interpreted together with the reaction conditions rather than treated as proof of an original aldehyde group. Thus, P is an aldohexose and Q is a ketohexose.
37. Two unbranched monosaccharides P and Q have the following open-chain structures:
P: \(\mathrm{CHO-CH(OH)-CH_2OH}\)
Q: \(\mathrm{CH_2OH-CO-CH_2OH}\)
Both compounds are tested separately with bromine water under mild conditions and with Fehling's solution under alkaline conditions.
Which statement correctly predicts their chemical behaviour?
ⓐ. P is oxidised by bromine water, while Q is not; both can give a positive Fehling's test.
ⓑ. Both are oxidised by bromine water, but only P can give a positive Fehling's test.
ⓒ. Neither is oxidised by bromine water, although both can give a positive Fehling's test.
ⓓ. Q is oxidised by bromine water, while P cannot give a positive Fehling's test.
Correct Answer: P is oxidised by bromine water, while Q is not; both can give a positive Fehling's test.
Explanation: The first step is to identify the carbonyl functionality in each monosaccharide. P contains a terminal aldehydic group and is therefore an aldotriose, specifically glyceraldehyde. Q contains a ketonic carbonyl group at its middle carbon and is the ketotriose dihydroxyacetone.
Bromine water is a mild oxidising reagent that can oxidise an aldehydic group to a carboxylic acid group. Consequently, P can undergo the corresponding oxidation, whereas Q does not undergo this characteristic aldehyde oxidation under the specified conditions.
Fehling's solution must be considered separately because it provides an alkaline reaction medium. P can reduce Fehling's reagent through its aldehydic functionality. Q can also demonstrate reducing behaviour because suitable ketoses undergo alkaline enediol-mediated isomerisation, generating aldose forms capable of reducing copper(II).
Thus, the original carbonyl classification and the observed reducing behaviour are not interchangeable criteria. Although Q is structurally a ketose, it can still give a positive Fehling's test.
The important distinction is that bromine-water oxidation identifies the aldehydic character of P, whereas alkaline reducing-sugar behaviour is possible for both P and Q.
38. An open-chain aldohexose P contains one aldehydic group, four secondary alcoholic groups and one primary alcoholic group. It undergoes two separate reactions:
Reaction I: Complete acetylation of its alcoholic hydroxyl groups.
Reaction II: Mild oxidation of its aldehydic group to a carboxylic acid.
Which combination correctly describes the products?
ⓐ. Reaction I gives a tetraacetate; Reaction II removes one carbon atom.
ⓑ. Reaction I gives a pentaacetate; Reaction II forms a six-carbon monocarboxylic acid.
ⓒ. Reaction I gives a hexaacetate; Reaction II forms a five-carbon monocarboxylic acid.
ⓓ. Reaction I gives a pentaacetate; Reaction II forms a six-carbon dicarboxylic acid.
Correct Answer: Reaction I gives a pentaacetate; Reaction II forms a six-carbon monocarboxylic acid.
Explanation: \(\textbf{Hydroxyl-group accounting:}\)
The open-chain aldohexose contains four secondary alcoholic hydroxyl groups and one primary alcoholic hydroxyl group. Therefore, the total number of alcoholic hydroxyl groups is:
\[
N_{\mathrm{OH}}=4+1=5
\]
Under complete acetylation, each alcoholic hydroxyl group can form an acetate ester. Reaction I consequently produces the corresponding pentaacetate.
\(\textbf{Identification of the oxidised group:}\)
The starting aldohexose also contains one aldehydic group. Mild oxidation converts this aldehydic group into a carboxylic acid group. The primary alcoholic group is not converted into another carboxylic acid group under the stated selective mild-oxidation conditions.
\(\textbf{Carbon-skeleton conservation:}\)
The oxidation changes the functional group at the aldehydic end without removing any carbon atom. The six-carbon skeleton is therefore retained, and the product contains one carboxylic acid group.
\(\textbf{Chemical verification:}\)
For glucose, complete acetylation gives glucose pentaacetate, while bromine-water oxidation gives gluconic acid. These reactions provide different structural information: acetylation establishes the number of hydroxyl groups, whereas mild oxidation establishes aldehydic functionality. A dicarboxylic acid would require oxidation at both ends of the carbon skeleton under suitable stronger conditions. The stated reactions therefore support pentaacetate formation and production of a six-carbon monocarboxylic acid.
39. Consider the following statements about an aldose existing in equilibrium between open-chain and cyclic forms.
Statement I: Intramolecular hemiacetal formation changes the functional environment of the original aldehydic carbon.
Statement II: Formation of the cyclic hemiacetal necessarily destroys all asymmetric centres already present in the open-chain aldose.
Statement III: The carbonyl carbon may become a new stereogenic centre during ring formation, allowing anomeric forms.
Statement IV: Anomers of the same aldose necessarily belong to opposite D/L configuration series.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and IV only
ⓒ. I and III only
ⓓ. III and IV only
Correct Answer: I and III only
Explanation: Statement I is correct because formation of a cyclic hemiacetal involves addition of an internal hydroxyl group to the aldehydic carbonyl group. The original carbonyl carbon changes from its trigonal-planar carbonyl environment to a tetrahedral hemiacetal environment. Statement II is incorrect because ring formation does not necessarily destroy the configurations of the asymmetric carbon atoms already present in the open-chain sugar. These stereochemical features can be retained in the cyclic product. Statement III is correct because the former carbonyl carbon can become a new stereogenic centre in the cyclic structure. Two configurations at this newly generated centre can produce alpha and beta anomeric forms. In an aldose such as glucose, the anomeric carbon is the former aldehydic carbon C1. Statement IV is incorrect because alpha and beta anomers differ in configuration at the anomeric centre rather than at the reference centre that determines D/L designation. Consequently, alpha-D-glucose and beta-D-glucose both belong to the D-series. The crucial distinction is between the stereochemical feature created by cyclisation and the configurational relationship used to assign D or L.
40. In a conventional Fischer projection, two aldohexoses P and Q have the following hydroxyl-group arrangements:
Both structures have –CHO at the top and –CH₂OH at the bottom.
P has its –OH groups at C2, C3, C4 and C5 directed right, left, right and right, respectively.
Q has its –OH groups at C2, C3, C4 and C5 directed left, right, left and left, respectively.
All horizontal substituents project towards the observer, according to Fischer-projection conventions.
Which relationship between P and Q is correct?
ⓐ. They are anomers because they differ only at the aldehydic carbon.
ⓑ. They are enantiomeric aldohexoses belonging to opposite D/L series.
ⓒ. They are constitutional isomers because their aldehyde groups occupy different carbons.
ⓓ. They are identical D-aldohexoses represented in different orientations.
Correct Answer: They are enantiomeric aldohexoses belonging to opposite D/L series.
Explanation: \(\textbf{Chemical identity:}\)
Both P and Q possess six carbon atoms and a terminal aldehydic carbonyl group. They are therefore aldohexoses with the same connectivity and functional-group classification.
\(\textbf{Stereochemical comparison:}\)
The Fischer projections specify the arrangements of the hydroxyl groups at the four asymmetric carbon atoms C2 through C5. At every corresponding asymmetric carbon, the hydroxyl group in Q is on the opposite side to that in P. Therefore, all four stereogenic centres have opposite configurations in the two structures.
\(\textbf{Enantiomeric relationship:}\)
When every stereogenic centre in a molecule is inverted while connectivity is retained, the resulting structures are non-superimposable mirror images. P and Q consequently form an enantiomeric pair rather than a pair of constitutional isomers.
\(\textbf{D/L assignment:}\)
The lowest asymmetric carbon in these aldohexoses is C5. P has its C5 hydroxyl group on the right and therefore belongs to the D-series. Q has its C5 hydroxyl group on the left and belongs to the L-series.
\(\textbf{Distinction from anomerism:}\)
Anomers differ only in configuration at the newly generated anomeric carbon of a cyclic sugar. P and Q instead differ at all their original asymmetric carbon atoms. Their relationship is therefore enantiomerism, not anomerism. This conclusion follows from the complete stereochemical arrangement rather than from the sign of any measured optical rotation.
41. A solution contains a cyclic form of D-glucose in which C1 is a free hemiacetal centre. A chemical transformation replaces the anomeric hydroxyl group with an –OCH₃ group, producing a methyl glucoside in which C1 is part of an acetal linkage.
Which combination of changes is expected?
ⓐ. The glycoside retains a free hemiacetal and exhibits ordinary mutarotation.
ⓑ. The glycoside acquires a ketonic carbonyl group and becomes a ketohexose.
ⓒ. The glycoside changes from D-configuration to L-configuration at C5.
ⓓ. The glycoside loses the ordinary ring-opening ability of the free hemiacetal until the acetal linkage is cleaved.
Correct Answer: The glycoside loses the ordinary ring-opening ability of the free hemiacetal until the acetal linkage is cleaved.
Explanation: \(\textbf{Initial cyclic structure:}\)
Cyclic glucose contains a hemiacetal centre at C1 because the original aldehydic carbonyl group has undergone intramolecular addition. A free anomeric hydroxyl group permits the hemiacetal to reopen and regenerate an open-chain aldehydic form. This reversible process contributes to the characteristic reducing behaviour and mutarotation of glucose.
\(\textbf{Change at the anomeric centre:}\)
Formation of a methyl glucoside replaces the anomeric hydroxyl functionality with an acetal-type linkage. The anomeric carbon is no longer a free hemiacetal centre. Consequently, ordinary reversible ring opening to the aldehydic form is prevented while the acetal linkage remains intact.
\(\textbf{Chemical consequence:}\)
The corresponding glycoside does not display the ordinary reducing behaviour or mutarotation associated with free glucose under conditions in which the glycoside remains intact. Suitable hydrolysis of the glycosidic linkage can restore the free anomeric functionality.
\(\textbf{Configuration check:}\)
The transformation at C1 does not, by itself, invert the configuration at C5 that determines the D-series designation. It also does not change the original six-carbon aldose skeleton into a ketose skeleton. The decisive structural change is therefore the conversion of the free hemiacetal centre into an acetal-type glycosidic centre. This provides a chemical explanation for the difference between a free reducing monosaccharide and its non-reducing glycoside.
42. Three monosaccharides P, Q and R have the following open-chain structures:
| Compound | Open-chain structure |
| P | \(\mathrm{CH_2OH-CO-CH_2OH}\) |
| Q | \(\mathrm{CH_2OH-CO-(CHOH)_2-CH_2OH}\) |
| R | \(\mathrm{CH_2OH-CO-(CHOH)_3-CH_2OH}\) |
Which classification and interpretation are correct?
ⓐ. P—Aldotriose; Q—Ketopentose; R—Ketohexose
ⓑ. P—Ketotriose; Q—Aldopentose; R—Ketohexose
ⓒ. P—Ketotriose; Q—Ketopentose; R—Ketohexose
ⓓ. P—Ketotriose; Q—Ketohexose; R—Ketoheptose
Correct Answer: P—Ketotriose; Q—Ketopentose; R—Ketohexose
Explanation: Monosaccharide classification combines two independent structural properties: the number of carbon atoms and the identity of the carbonyl functional group. In P, the carbonyl group is attached to two carbon-containing groups and is therefore ketonic. Its structure contains three carbon atoms, establishing that P is a ketotriose. Q also contains a ketonic carbonyl group. Its carbon skeleton consists of two terminal carbon atoms, one ketonic carbon and two additional –CHOH carbon atoms. The total carbon count is five, so Q is a ketopentose. R has the same general ketose arrangement but contains three –CHOH units between the ketonic carbon and the terminal alcohol group. Its carbon count is therefore six, making R a ketohexose. The common ketonic functional group places all three compounds in the ketose category. Their different carbon counts determine the triose, pentose and hexose prefixes. The location of a ketonic carbonyl group must not be confused with the terminal aldehydic group of an aldose. The table consequently demonstrates how a shared functional-group class can contain monosaccharides of different carbon-chain lengths.
43. An open-chain ketohexose has its ketonic carbonyl group at C2. Its C5 hydroxyl group undergoes intramolecular addition to the carbonyl group, giving a cyclic structure.
Which structural description correctly follows from this transformation?
ⓐ. A five-membered cyclic hemiketal is formed, and C2 becomes the anomeric carbon.
ⓑ. A six-membered cyclic hemiacetal is formed, and C1 becomes the anomeric carbon.
ⓒ. A five-membered cyclic hemiacetal is formed, and C5 becomes the anomeric carbon.
ⓓ. A six-membered cyclic hemiketal is formed, and C6 becomes the anomeric carbon.
Correct Answer: A five-membered cyclic hemiketal is formed, and C2 becomes the anomeric carbon.
Explanation: \(\textbf{Carbonyl identification:}\)
The given monosaccharide is a ketohexose because it contains six carbon atoms and possesses ketonic carbonyl functionality. Its carbonyl carbon is located at C2 rather than at the terminal C1 position characteristic of an aldohexose.
\(\textbf{Intramolecular cyclisation:}\)
The hydroxyl group at C5 attacks the carbonyl carbon at C2. This intramolecular addition produces a cyclic structure through the oxygen atom of the C5 hydroxyl group. The ring contains C2, C3, C4, C5 and the attacking oxygen atom.
\(\textbf{Ring-size determination:}\)
There are four carbon atoms and one oxygen atom in the resulting ring. The ring is therefore five-membered and is described as a furanose-type ring.
\(\textbf{Functional-group consequence:}\)
Because the carbonyl group involved in the addition is ketonic, the resulting cyclic structure contains a hemiketal centre. The original ketonic carbon C2 becomes the anomeric carbon.
\(\textbf{Chemical comparison:}\)
Fructose provides the NCERT example of this type of cyclisation. Its furanose forms differ in configuration at C2. In contrast, cyclisation of glucose through its C1 aldehyde and C5 hydroxyl group gives a six-membered cyclic hemiacetal with anomeric carbon C1. The different carbonyl positions therefore explain the different anomeric-carbon positions and cyclic functional-group types.
44. Two monosaccharides P and Q possess the same molecular formula, \(\mathrm{C_6H_{12}O_6}\).
In the open-chain form, P has an aldehydic group at C1, while Q has a ketonic group at C2.
P cyclises through its C5 hydroxyl group, and Q also cyclises through its C5 hydroxyl group.
Which statement correctly compares the cyclic structures?
ⓐ. Both produce six-membered hemiacetals, but their anomeric carbons differ.
ⓑ. P produces a five-membered hemiacetal, while Q produces a six-membered hemiketal.
ⓒ. Both produce five-membered hemiketals because the same hydroxyl position participates.
ⓓ. P produces a six-membered hemiacetal, while Q produces a five-membered hemiketal.
Correct Answer: P produces a six-membered hemiacetal, while Q produces a five-membered hemiketal.
Explanation: \(\textbf{Cyclisation of P:}\)
P contains an aldehydic carbonyl group at C1 and is therefore an aldohexose. When the C5 hydroxyl group attacks C1, the cyclic path includes C1 through C5 and one oxygen atom. This produces a six-membered ring containing five carbon atoms and one oxygen atom. Because an aldehyde undergoes the intramolecular addition, the product is a cyclic hemiacetal.
\(\textbf{Cyclisation of Q:}\)
Q contains a ketonic carbonyl group at C2 and is therefore a ketohexose. Attack by the C5 hydroxyl group now connects C5 to C2. The ring contains C2 through C5 and one oxygen atom, giving a five-membered ring. Because the original carbonyl group is ketonic, the product is a cyclic hemiketal.
\(\textbf{Structural inference:}\)
P has its anomeric centre at C1, whereas Q has its anomeric centre at C2. The two cyclic structures therefore differ in ring size, functional-group type and position of the anomeric carbon.
\(\textbf{Consistency check:}\)
Both sugars retain six carbon atoms in their complete molecular structures. The difference in ring size does not indicate a loss of carbon atoms because not every carbon must lie within the ring. This distinction explains the familiar pyranose structure of glucose and furanose structure of fructose without requiring different molecular formulas.
45. A solution of pure D-fructose is tested under two different sets of conditions.
Case I: It is treated with bromine water under mild conditions suitable for selective oxidation of aldehydes.
Case II: It is heated with Fehling's solution under alkaline conditions.
Which pair of observations is expected?
ⓐ. Oxidation of its ketone to gluconic acid in Case I; negative reduction test in Case II
ⓑ. No corresponding mild aldehyde oxidation in Case I; positive reducing-sugar test in Case II
ⓒ. Positive aldehyde oxidation in Case I; negative reducing-sugar test in Case II
ⓓ. Conversion into a non-reducing polysaccharide in Case I; positive reducing-sugar test in Case II
Correct Answer: No corresponding mild aldehyde oxidation in Case I; positive reducing-sugar test in Case II
Explanation: \(\textbf{Initial structural identity:}\)
Fructose is a ketohexose with its carbonyl group at C2 in the open-chain structure. It is not an aldose merely because it possesses the same molecular formula as glucose.
\(\textbf{Behaviour in Case I:}\)
Bromine water under suitable mild conditions is used to oxidise aldehydic groups selectively to carboxylic acid groups. The open-chain form of fructose contains a ketonic rather than an aldehydic carbonyl group. Consequently, fructose does not undergo the corresponding direct mild aldehyde oxidation characteristic of glucose under these conditions.
\(\textbf{Behaviour in Case II:}\)
Fehling's solution provides an alkaline reaction medium. Under these conditions, fructose can undergo enediol-mediated rearrangement, producing aldose forms capable of undergoing oxidation. The associated reduction of copper(II) gives the characteristic positive reducing-sugar test.
\(\textbf{Interpretation of the difference:}\)
The two observations are not contradictory because the reaction environments are different. A positive Fehling's test does not prove that the original monosaccharide possessed an aldehydic group. Likewise, a negative mild bromine-water oxidation does not establish that a monosaccharide must be non-reducing under alkaline conditions. The combination of observations is consistent with fructose being a reducing ketose.
46. Consider the following statements about glucose and fructose.
Statement I: Glucose and fructose are functional-group isomers with the same molecular formula.
Statement II: The anomeric carbon in the commonly described cyclic form of glucose is C1, while that in fructose is C2.
Statement III: The D designation of fructose requires it to be dextrorotatory.
Statement IV: Fructose forms a cyclic hemiketal, whereas glucose forms a cyclic hemiacetal.
Statement V: Both glucose and fructose are non-reducing because their cyclic structures lack a permanently free open-chain carbonyl group.
Which combination contains all the correct statements?
ⓐ. I, II and V only
ⓑ. II, III and IV only
ⓒ. I, II and IV only
ⓓ. I, III, IV and V only
Correct Answer: I, II and IV only
Explanation: Statement I is correct because glucose and fructose both have molecular formula \(\mathrm{C_6H_{12}O_6}\), but they differ in carbonyl functionality. Glucose is an aldohexose, whereas fructose is a ketohexose. Statement II is correct because the original aldehydic carbon at C1 becomes the anomeric carbon in cyclic glucose. In cyclic fructose, the corresponding anomeric centre originates from the ketonic carbon at C2. Statement III is incorrect because D/L notation identifies relative configuration, not the direction of optical rotation. D-fructose is laevorotatory and is written as D-(–)-fructose. Statement IV is correct because intramolecular addition to an aldehydic group produces a hemiacetal, whereas corresponding addition to a ketonic group produces a hemiketal. The commonly described cyclic structures of glucose and fructose illustrate this distinction. Statement V is incorrect because both glucose and fructose are reducing monosaccharides. Glucose can supply an open-chain aldehydic form through reversible ring opening. Fructose can additionally undergo rearrangement under alkaline reducing-test conditions. Therefore, Statements I, II and IV are correct, while Statements III and V confuse configuration with optical rotation and cyclic structure with non-reducing behaviour.
47. A hypothetical disaccharide is formed from one aldose hexose and one ketose hexose. The aldose has its anomeric carbon at C1, while the ketose has its anomeric carbon at C2.
Consider two possible linkages:
Structure P: The glycosidic oxygen joins C1 of the aldose to C2 of the ketose, directly involving both anomeric centres.
Structure Q: The glycosidic oxygen joins C1 of the aldose to the hydroxyl-bearing C6 of the ketose, leaving the ketose anomeric centre at C2 free.
Assume both disaccharides remain chemically stable under the stated reducing-test conditions.
Which prediction follows from the specified connectivity?
ⓐ. P is non-reducing, whereas Q is reducing.
ⓑ. P is reducing, whereas Q is non-reducing.
ⓒ. Both are non-reducing because both contain a ketose unit.
ⓓ. Both are reducing because each yields reducing monosaccharides on hydrolysis.
Correct Answer: P is non-reducing, whereas Q is reducing.
Explanation: \(\textbf{Anomeric-centre identification:}\)
An aldose has its carbonyl carbon at C1 in the open-chain form. Consequently, its anomeric carbon in the cyclic structure is C1. A ketose such as fructose has its carbonyl carbon at C2, which becomes the anomeric carbon after cyclisation.
\(\textbf{Linkage analysis in P:}\)
P contains a glycosidic linkage directly joining the aldose anomeric centre at C1 to the ketose anomeric centre at C2. Both centres therefore participate in the linkage. Neither constituent unit retains the corresponding free hemiacetal or hemiketal centre capable of ordinary ring opening while the glycosidic bond remains intact. P is consequently non-reducing.
\(\textbf{Linkage analysis in Q:}\)
Q contains a glycosidic linkage involving the aldose anomeric centre and a non-anomeric hydroxyl position of the ketose. The ketose anomeric centre at C2 remains free. This centre can participate in ring-opening equilibrium, making the ketose-derived reducing functionality available under appropriate conditions. Q is therefore reducing.
\(\textbf{Further chemical implication:}\)
Both P and Q would yield an aldose and a ketose on complete hydrolysis, but this common hydrolysis composition does not require identical reducing behaviour before hydrolysis. Their distinction arises specifically from whether one or both anomeric centres are engaged in the glycosidic bond. The C1–C2 arrangement in P corresponds to the essential anomeric-centre engagement responsible for the non-reducing character of sucrose. Thus, the structural information provides a more reliable prediction of reducing character than the constituent monosaccharide identities alone.
48. A pure sample of glucose undergoes the following reactions:
Statement I: Prolonged heating with HI produces n-hexane.
Statement II: Reaction with hydroxylamine produces an oxime.
Statement III: Acetylation with acetic anhydride produces a stable pentaacetate.
Statement IV: These three reactions independently establish the exact configuration of every asymmetric carbon in D-glucose.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and III only
Explanation: Statement I is correct because prolonged heating of glucose with HI produces n-hexane. This observation supports the presence of a continuous, unbranched chain of six carbon atoms in glucose. Statement II is correct because hydroxylamine reacts with a carbonyl group to form an oxime. Oxime formation therefore provides evidence for carbonyl functionality but does not independently distinguish an aldehyde from a ketone. Statement III is correct because glucose produces a pentaacetate on acetylation with acetic anhydride. This establishes the presence of five hydroxyl groups capable of acetylation. The formation of a stable pentaacetate also supports the conclusion that these hydroxyl groups are attached to different carbon atoms. Statement IV is incorrect because none of these three reactions independently determines the spatial arrangement of hydroxyl groups at all asymmetric carbon atoms. Carbon-skeleton determination, functional-group identification and stereochemical configuration are different structural questions. Fischer established the configuration of glucose through additional stereochemical considerations and chemical correlations. Thus, the first three observations provide important constitutional evidence but are insufficient to establish the complete stereochemical structure.
49. Glucose undergoes oxidation under two different conditions:
Reaction P: Glucose is treated with bromine water.
Reaction Q: Glucose is treated with nitric acid under conditions giving the corresponding dicarboxylic acid.
Which comparison correctly identifies the structural information provided by the two reactions?
ⓐ. P establishes the C6 primary alcoholic group, whereas Q establishes only the C1 aldehyde.
ⓑ. P establishes that glucose is a ketose, whereas Q establishes its unbranched carbon skeleton.
ⓒ. P supports the C1 aldehydic group, whereas Q additionally supports oxidation of the C6 primary alcoholic group.
ⓓ. P establishes five hydroxyl groups, whereas Q establishes the absolute configuration at C5.
Correct Answer: P supports the C1 aldehydic group, whereas Q additionally supports oxidation of the C6 primary alcoholic group.
Explanation: \(\textbf{Selective oxidation with bromine water:}\)
Glucose contains an aldehydic carbonyl group at C1 in its open-chain representation. Bromine water is a mild oxidising agent capable of converting this aldehydic group into a carboxylic acid group. The product is gluconic acid, which retains the six-carbon skeleton and the primary alcoholic group at C6. This reaction therefore supports aldehydic functionality in glucose.
\(\textbf{Oxidation with nitric acid:}\)
Under the stated nitric acid oxidation conditions, glucose produces saccharic acid, a dicarboxylic acid. The product contains carboxylic acid groups at both ends of the original six-carbon chain. The C1 aldehydic group is oxidised to a carboxylic acid group, and the C6 primary alcoholic group is also oxidised to a carboxylic acid group.
\(\textbf{Structural inference:}\)
The difference between the oxidation products provides evidence for the different terminal functional groups originally present in glucose. Bromine water identifies the readily oxidised aldehydic end, whereas nitric acid oxidation also reveals the oxidisable primary alcoholic end. Neither reaction independently determines the configuration of the asymmetric carbon atoms. The two reactions must therefore be interpreted as complementary evidence about the constitution of glucose.
50. Two compounds P and Q, each having six carbon atoms in an unbranched chain, form oximes with hydroxylamine and produce n-hexane on prolonged heating with HI.
Only P is converted into a six-carbon monocarboxylic acid by bromine water under mild aldehyde-oxidising conditions.
Assuming P and Q are the open-chain forms of ordinary hexose monosaccharides, which conclusion is best supported?
ⓐ. Both are aldohexoses because both form oximes.
ⓑ. P is a ketohexose, while Q is an aldohexose.
ⓒ. Both are ketohexoses because both produce n-hexane.
ⓓ. P is an aldohexose, while Q is a ketohexose.
Correct Answer: P is an aldohexose, while Q is a ketohexose.
Explanation: The first observation establishes that both compounds contain carbonyl functionality because both react with hydroxylamine to form oximes. However, oxime formation is common to aldehydes and ketones, so this reaction alone cannot differentiate aldoses from ketoses. The formation of n-hexane with HI provides evidence for an unbranched six-carbon skeleton in both compounds. It does not identify the original position or type of carbonyl group. The bromine-water observation is therefore the decisive additional evidence. Under the specified mild conditions, bromine water oxidises an aldehydic group to a carboxylic acid group. Since P forms a six-carbon monocarboxylic acid, its carbonyl functionality is consistent with an aldehyde. P is therefore classified as an aldohexose. Q lacks the corresponding mild aldehyde-oxidation behaviour, which is consistent with ketonic carbonyl functionality under the stated assumptions. Consequently, Q is a ketohexose. Glucose and fructose provide familiar representatives of these two structural classes. The question illustrates why several chemical observations must be combined before assigning a specific carbonyl class.
51. Consider the following two oxidation routes starting from D-glucose.
Route I: D-glucose is first oxidised using bromine water to give compound X. Compound X is then subjected to nitric acid oxidation, giving compound Z.
Route II: D-glucose is directly oxidised using nitric acid under the same complete terminal-oxidation conditions, giving compound Y.
Both oxidation routes retain the original six-carbon skeleton, and no stereochemical rearrangement occurs at C2–C5.
Which identification is correct?
ⓐ. X—Gluconic acid; Y—Saccharic acid; Z—Saccharic acid
ⓑ. X—Saccharic acid; Y—Gluconic acid; Z—Saccharic acid
ⓒ. X—Gluconic acid; Y—Gluconic acid; Z—Saccharic acid
ⓓ. X—Saccharic acid; Y—Saccharic acid; Z—Gluconic acid
Correct Answer: X—Gluconic acid; Y—Saccharic acid; Z—Saccharic acid
Explanation: \(\textbf{First transformation in Route I:}\)
D-glucose contains an aldehydic group at C1 and a primary alcoholic group at C6 in its open-chain structure. Bromine water selectively oxidises the aldehydic group into a carboxylic acid group. The C6 primary alcoholic group remains unchanged under these mild conditions. Therefore, compound X is gluconic acid.
\(\textbf{Second transformation in Route I:}\)
Gluconic acid already possesses a carboxylic acid group at C1. Its C6 position still contains a primary alcoholic group. Nitric acid oxidation under the stated conditions converts this remaining terminal primary alcoholic group into a carboxylic acid group. Compound Z is consequently saccharic acid.
\(\textbf{Direct transformation in Route II:}\)
Nitric acid oxidation of glucose can convert both terminal functional groups into carboxylic acid groups. The product is the same dicarboxylic acid, saccharic acid, represented by Y.
\(\textbf{Product consistency:}\)
Both routes ultimately produce a six-carbon compound containing carboxylic acid groups at C1 and C6. The difference lies in the intermediate stage: Route I first forms the monocarboxylic acid, while Route II directly reaches the dicarboxylic acid. The stated retention of configuration at C2–C5 ensures that the two terminally oxidised products have the same stereochemical constitution. Thus, X is gluconic acid, whereas both Y and Z are saccharic acid.
52. A \(0.10\ \mathrm{mol}\) sample of pure glucose is completely converted into gluconic acid using bromine water. A second \(0.10\ \mathrm{mol}\) sample of glucose is completely converted into saccharic acid using nitric acid.
Assume quantitative conversion and no loss of the six-carbon skeleton.
Given molar masses:
Glucose = \(180\ \mathrm{g\,mol^{-1}}\)
Gluconic acid = \(196\ \mathrm{g\,mol^{-1}}\)
Saccharic acid = \(210\ \mathrm{g\,mol^{-1}}\)
What is the difference between the masses of the two isolated acid products?
ⓐ. \(1.4\ \mathrm{g}\)
ⓑ. \(1.6\ \mathrm{g}\)
ⓒ. \(3.0\ \mathrm{g}\)
ⓓ. \(3.2\ \mathrm{g}\)
Correct Answer: \(1.4\ \mathrm{g}\)
Explanation: \(\textbf{Identifying the two oxidation products:}\)
Bromine water oxidises the aldehydic group of glucose to produce gluconic acid. Nitric acid, under the stated complete oxidation conditions, converts both terminal functional groups to carboxylic acid groups, producing saccharic acid.
\(\textbf{Mole conservation:}\)
Each glucose molecule produces one molecule of the corresponding acid product because the six-carbon skeleton is retained.
Therefore:
\[
n_{\mathrm{gluconic\ acid}}=0.10\ \mathrm{mol}
\]
\[
n_{\mathrm{saccharic\ acid}}=0.10\ \mathrm{mol}
\]
\(\textbf{Mass of gluconic acid:}\)
Using the relation \(m=nM\):
\[
m_1=0.10\times196
\]
\[
m_1=19.6\ \mathrm{g}
\]
\(\textbf{Mass of saccharic acid:}\)
\[
m_2=0.10\times210
\]
\[
m_2=21.0\ \mathrm{g}
\]
\(\textbf{Required mass difference:}\)
\[
\Delta m=m_2-m_1
\]
\[
\Delta m=21.0-19.6
\]
\[
\Delta m=1.4\ \mathrm{g}
\]
\(\textbf{Chemical verification:}\)
The difference in molar masses is:
\[
210-196=14\ \mathrm{g\,mol^{-1}}
\]
This corresponds to oxidation of the C6 primary alcoholic group to a carboxylic acid group, involving addition of one oxygen atom and removal of two hydrogen atoms.
\[
16-2=14\ \mathrm{g\,mol^{-1}}
\]
For \(0.10\ \mathrm{mol}\), the corresponding difference is \(1.4\ \mathrm{g}\), confirming the calculated result.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta m=1.4\ \mathrm{g}}
\]
53. An unknown carbohydrate X has molar mass \(180\ \mathrm{g\,mol^{-1}}\). Complete acetylation of one mole of X produces one mole of a stable derivative Y having molar mass \(390\ \mathrm{g\,mol^{-1}}\).
Each acetylated hydroxyl group increases the molecular mass by \(42\ \mathrm{g\,mol^{-1}}\), and no other functional group undergoes reaction.
The original compound also yields n-hexane on prolonged heating with HI.
Which conclusion is supported by the combined evidence?
ⓐ. X contains four hydroxyl groups and an unbranched five-carbon skeleton.
ⓑ. X contains five hydroxyl groups and an unbranched six-carbon skeleton.
ⓒ. X contains six hydroxyl groups and an unbranched six-carbon skeleton.
ⓓ. X contains five hydroxyl groups and a branched six-carbon skeleton.
Correct Answer: X contains five hydroxyl groups and an unbranched six-carbon skeleton.
Explanation: \(\textbf{Mass change during acetylation:}\)
The molar mass of the original carbohydrate is:
\[
M_X=180\ \mathrm{g\,mol^{-1}}
\]
The molar mass of the completely acetylated derivative is:
\[
M_Y=390\ \mathrm{g\,mol^{-1}}
\]
Therefore, the increase in molar mass is:
\[
\Delta M=390-180
\]
\[
\Delta M=210\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Hydroxyl-group determination:}\)
The problem specifies an increase of \(42\ \mathrm{g\,mol^{-1}}\) per hydroxyl group undergoing acetylation.
Hence:
\[
N_{\mathrm{OH}}=\frac{210}{42}
\]
\[
N_{\mathrm{OH}}=5
\]
Thus, X possesses five hydroxyl groups capable of forming acetate esters.
\(\textbf{Independent carbon-skeleton evidence:}\)
Prolonged heating with HI produces n-hexane. The product contains six carbon atoms arranged in an unbranched chain. This provides evidence for a continuous six-carbon skeleton in the original carbohydrate.
\(\textbf{Combining the observations:}\)
The acetylation experiment determines the number of hydroxyl groups, while the HI reaction supplies information about carbon connectivity. Neither observation independently establishes whether the original carbonyl group was aldehydic or ketonic. An additional selective reaction would be needed to establish that distinction.
\(\textbf{Final answer:}\)
\[
\boxed{5\ \mathrm{-OH\ groups};\ 6\ \mathrm{carbon\ atoms\ in\ an\ unbranched\ chain}}
\]
54. A researcher wishes to determine which structural conclusions about glucose follow from particular chemical observations.
| Observation | Proposed conclusion |
| I. Glucose forms an oxime with hydroxylamine. | Glucose contains carbonyl functionality in an accessible molecular form. |
| II. Glucose gives n-hexane on prolonged heating with HI. | The six carbon atoms occur in an unbranched chain. |
| III. Glucose forms a stable pentaacetate. | The five alcoholic hydroxyl groups are attached to different carbon atoms. |
| IV. Glucose forms gluconic acid with bromine water. | Its original open-chain carbonyl group must be ketonic. |
Which proposed conclusions are chemically justified?
ⓐ. I and IV only
ⓑ. II and III only
ⓒ. I, II and III only
ⓓ. II, III and IV only
Correct Answer: I, II and III only
Explanation: Row I is justified because hydroxylamine reacts with carbonyl compounds to form oximes. In aqueous solution, glucose can access an open-chain form containing a carbonyl group, making oxime formation possible. The reaction establishes carbonyl functionality but does not independently identify its precise class. Row II is justified because prolonged heating with HI converts glucose to n-hexane. This observation supports a continuous, unbranched chain of six carbon atoms. Row III is justified because complete acetylation produces a stable glucose pentaacetate. The formation of five acetate groups establishes five alcoholic hydroxyl groups, and the stability of the derivative supports their attachment to different carbon atoms in the glucose structure. Row IV is incorrect because bromine water oxidises the aldehydic group of glucose to produce gluconic acid. The observation therefore supports an aldehydic rather than a ketonic carbonyl group in the open-chain form. These reactions provide different types of structural information, so their conclusions must not be interchanged. Correct structural deduction involves matching each chemical transformation to the specific functional group or connectivity feature it reveals. Therefore, only Rows I, II and III contain justified conclusions.
55. Glucose forms an oxime with hydroxylamine and is oxidised by bromine water to gluconic acid. Nevertheless, glucose does not normally give Schiff's test or form the expected sodium hydrogensulphite addition product.
Which explanation best reconciles these observations?
ⓐ. Glucose contains a ketonic group that undergoes direct bromine-water oxidation.
ⓑ. Glucose exists only in an open-chain structure, but its aldehyde is unusually resistant to every addition reaction.
ⓒ. Glucose permanently loses its aldehydic functionality when dissolved in water.
ⓓ. Glucose predominantly exists in cyclic hemiacetal forms that are in equilibrium with a small amount of open-chain aldehydic form.
Correct Answer: Glucose predominantly exists in cyclic hemiacetal forms that are in equilibrium with a small amount of open-chain aldehydic form.
Explanation: \(\textbf{Evidence supporting an aldehydic form:}\)
Glucose undergoes reactions that establish the availability of carbonyl functionality. Oxime formation with hydroxylamine provides evidence for a carbonyl group, while oxidation by bromine water to gluconic acid supports aldehydic functionality. These observations are consistent with the open-chain structure of glucose containing an aldehydic group at C1.
\(\textbf{Limitations of the open-chain representation:}\)
If glucose existed exclusively as an ordinary open-chain aldehyde, its failure to give Schiff's test and the expected sodium hydrogensulphite addition product would be difficult to explain. NCERT identifies these observations as limitations of a structure representing glucose only in its open-chain form.
\(\textbf{Cyclic hemiacetal explanation:}\)
In glucose, the C5 hydroxyl group can undergo intramolecular addition to the C1 aldehydic group. This produces a six-membered cyclic hemiacetal. In the cyclic form, C1 is present as a hemiacetal centre rather than as a free aldehydic carbonyl group.
\(\textbf{Reconciliation with reducing behaviour:}\)
The cyclic forms are in equilibrium with a comparatively small amount of the open-chain aldehydic form. Under suitable reaction conditions, consumption of that reactive form can be accompanied by further ring opening. Therefore, glucose can exhibit aldehyde-related reactions without behaving as an ordinary freely available aldehyde in every test. The cyclic equilibrium model explains why the open-chain representation alone is insufficient.
56. Glucose forms a pentaacetate on treatment with acetic anhydride. The isolated glucose pentaacetate does not react with hydroxylamine under ordinary oxime-forming conditions, although glucose itself forms an oxime.
Which inference most directly accounts for this difference?
ⓐ. Glucose pentaacetate has lost all six carbon atoms from its original skeleton.
ⓑ. Acetylation of the anomeric hydroxyl blocks normal hemiacetal ring opening to the aldehyde.
ⓒ. Acetylation converts the glucose aldehydic carbon into a ketonic carbonyl group.
ⓓ. The hydroxylamine reaction requires five unprotected alcoholic groups but no carbonyl functionality.
Correct Answer: Acetylation of the anomeric hydroxyl blocks normal hemiacetal ring opening to the aldehyde.
Explanation: Glucose forms a cyclic hemiacetal through intramolecular addition of its C5 hydroxyl group to its C1 aldehydic carbon. The free hemiacetal centre at C1 allows the cyclic structure to reopen and regenerate the aldehydic form in solution. Hydroxylamine can react with this accessible carbonyl functionality to produce an oxime. During complete acetylation, the hydroxyl groups of glucose, including the anomeric hydroxyl group, become acetylated. The resulting glucose pentaacetate contains an acetylated anomeric centre that behaves as a glycosidic acetal-type functionality. Consequently, ordinary ring opening to regenerate the free aldehydic form is prevented while this structure remains intact. Hydroxylamine therefore does not encounter the free carbonyl group needed for oxime formation. The absence of oxime formation does not indicate that the original six-carbon skeleton has been destroyed. Nor does it imply that acetylation has converted the original aldehyde into a ketone. Instead, the experiment provides evidence for the cyclic structure of glucose and for the importance of anomeric-centre availability in determining chemical behaviour. It also illustrates how derivatisation of a functional group can change reactivity without changing the underlying carbon skeleton.
57. Glucose is obtained in two different crystalline forms under the following conditions:
Crystallisation from a concentrated glucose solution at 303 K gives crystalline form P, having melting point 419 K.
Crystallisation from a hot saturated aqueous glucose solution at 371 K gives crystalline form Q, having melting point 423 K.
Both forms have the same molecular formula and belong to the D-series.
Which interpretation is consistent with the cyclic structure of glucose?
ⓐ. P is alpha-D-glucose and Q is beta-D-glucose, differing at the anomeric carbon.
ⓑ. P is D-glucose and Q is L-glucose, differing at every asymmetric carbon.
ⓒ. P is an aldohexose and Q is a ketohexose, differing in carbonyl position.
ⓓ. P is an open-chain aldehyde and Q is a six-carbon ketone.
Correct Answer: P is alpha-D-glucose and Q is beta-D-glucose, differing at the anomeric carbon.
Explanation: NCERT describes two crystalline forms of glucose obtained under different crystallisation conditions. The alpha form is obtained from concentrated glucose solution at 303 K and has a melting point of 419 K. The beta form is obtained from hot saturated aqueous solution at 371 K and has a melting point of 423 K. These forms have the same molecular formula and the same basic carbon skeleton. Their difference is therefore not a change in the number of carbon atoms or a conversion between aldose and ketose structures. The distinction arises from the configuration of the newly formed stereogenic centre at C1 during cyclic hemiacetal formation. C1 is known as the anomeric carbon of glucose. Alpha-D-glucose and beta-D-glucose differ at this anomeric centre while retaining the D-series configuration determined by C5. They are consequently anomers rather than enantiomers. Their differing melting points are compatible with distinct crystalline stereoisomeric forms. In suitable aqueous solution, these forms can interconvert through ring opening and reclosure. Thus, the crystallisation observations provide evidence supporting cyclic glucose structures and anomerism.
58. Two cyclic forms of D-glucose are represented using conventional Haworth projections.
Both structures contain a six-membered ring with oxygen between C1 and C5. The –CH₂OH group attached to C5 is drawn above the ring plane in both structures.
In structure P, the anomeric hydroxyl group attached to C1 is below the ring plane.
In structure Q, the anomeric hydroxyl group attached to C1 is above the ring plane.
The configurations at C2, C3, C4 and C5 are identical in P and Q.
Which conclusion is correct?
ⓐ. P and Q are enantiomers because their anomeric hydroxyl groups have opposite orientations.
ⓑ. P is beta-D-glucopyranose and Q is alpha-D-glucopyranose; both are non-reducing.
ⓒ. P is alpha-D-glucopyranose and Q is beta-D-glucopyranose; both retain free hemiacetal centres.
ⓓ. P and Q are constitutional isomers because the glycosidic oxygen changes its bonding position.
Correct Answer: P is alpha-D-glucopyranose and Q is beta-D-glucopyranose; both retain free hemiacetal centres.
Explanation: \(\textbf{Ring identification:}\)
The specified ring contains five carbon atoms and one oxygen atom, giving a six-membered cyclic structure. This is the pyranose form of glucose. The ring oxygen connects C1 and C5 and is not itself an anomeric carbon.
\(\textbf{Anomeric configuration:}\)
For the conventional Haworth projection of D-glucopyranose, the C5 –CH₂OH substituent is represented above the ring plane. In the alpha form, the anomeric hydroxyl group at C1 lies on the opposite side of the ring from this substituent. Therefore, P represents alpha-D-glucopyranose. In the beta form, the anomeric hydroxyl group lies on the same side of the ring as the C5 –CH₂OH substituent. Consequently, Q represents beta-D-glucopyranose.
\(\textbf{Chemical relationship:}\)
The two structures differ only in configuration at the anomeric carbon. They are anomers, not enantiomers or constitutional isomers. Both retain free hemiacetal functionality at C1.
\(\textbf{Reducing consequence:}\)
A free hemiacetal can undergo ring opening to regenerate the corresponding open-chain aldehydic form. Therefore, both alpha-D-glucopyranose and beta-D-glucopyranose are reducing forms of glucose. Their different anomeric configurations do not make either structure inherently non-reducing.
59. Consider the following Assertion and Reason.
Assertion (A): Alpha-D-glucose and beta-D-glucose can interconvert in aqueous solution without changing the configuration at C5.
Reason (R): Ring opening followed by ring closure can alter the configuration at C1, while the original configuration at C5 is retained.
Choose the correct option.
ⓐ. Both A and R are true, but R is not the correct explanation of A.
ⓑ. Both A and R are true, and R is the correct explanation of A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R is the correct explanation of A.
Explanation: The Assertion is true because alpha-D-glucose and beta-D-glucose are anomeric forms of the same monosaccharide. They differ in configuration at C1, which becomes the anomeric carbon during cyclic hemiacetal formation. In suitable aqueous solution, the cyclic hemiacetal can undergo ring opening to produce the open-chain aldehydic form. The original anomeric stereogenic centre at C1 is temporarily lost when the carbonyl carbon becomes trigonal planar. Subsequent intramolecular addition of the C5 hydroxyl group can regenerate either anomeric configuration at C1. This provides the structural basis for interconversion between the alpha and beta forms. The stereochemical arrangement at C5 is not inverted during this ordinary ring-opening and ring-closing process. Consequently, both cyclic products retain D-configuration. The Reason is therefore true and explains the Assertion. The important distinction is that anomeric interconversion changes the configuration at the newly formed hemiacetal centre rather than converting a D-series carbohydrate into its L-series enantiomer. This behaviour is associated with the mutarotation of glucose in solution.
60. A D-glucose molecule is modified so that its hydroxyl group at C5 is replaced by a non-hydroxyl substituent. Assume that the aldehydic group at C1 and the carbon skeleton remain unchanged.
Which structural conclusion follows specifically from this modification?
ⓐ. The modified compound must become a ketose because its C5 hydroxyl group is absent.
ⓑ. The modified compound must lose the ability to undergo every possible intramolecular cyclisation.
ⓒ. The modified compound must acquire L-configuration because C5 is the lowest asymmetric carbon.
ⓓ. Formation of the usual six-membered glucose hemiacetal through C5–OH addition to C1 is prevented.
Correct Answer: Formation of the usual six-membered glucose hemiacetal through C5–OH addition to C1 is prevented.
Explanation: Ordinary glucose forms its familiar six-membered pyranose ring when the hydroxyl group attached to C5 undergoes intramolecular addition to the aldehydic carbon at C1. The oxygen of the C5 hydroxyl group becomes the ring oxygen, while the C1 carbonyl carbon becomes the anomeric hemiacetal centre. The modified molecule described in the question no longer possesses that particular C5 hydroxyl group. Consequently, the specified C5–OH to C1 cyclisation pathway is unavailable. However, this does not establish that every conceivable cyclic structure is impossible, because other appropriately positioned hydroxyl groups may support different intramolecular addition arrangements. The modification also does not move the C1 aldehydic group to an internal carbon position, so conversion into a ketose cannot be inferred. Similarly, removing or replacing a group at a stereogenic centre does not automatically establish an inversion from D to L. Depending on the substituent introduced, the stereochemical identity of that centre would require appropriate structural analysis. The defensible conclusion is restricted to the loss of the particular cyclisation pathway involving the original C5 hydroxyl group. This demonstrates how the position of an intramolecularly reacting hydroxyl group determines the accessibility of a specific cyclic carbohydrate structure.
61. An open-chain D-glucose molecule possesses four asymmetric carbon atoms at C2, C3, C4 and C5. On forming its usual cyclic pyranose hemiacetal, C1 becomes a new asymmetric carbon.
Which statement correctly describes the stereochemical consequence?
ⓐ. Cyclisation produces a new stereogenic centre at C1, allowing two anomers while retaining the configurations of the original four centres.
ⓑ. Cyclisation removes the four original asymmetric centres and leaves only the anomeric carbon asymmetric.
ⓒ. Cyclisation makes C6 an asymmetric carbon because the terminal –CH₂OH group lies outside the ring.
ⓓ. Cyclisation converts the original D-glucose into both D- and L-series molecules through inversion at C5.
Correct Answer: Cyclisation produces a new stereogenic centre at C1, allowing two anomers while retaining the configurations of the original four centres.
Explanation: \(\textbf{Stereochemical structure before cyclisation:}\)
In the open-chain form of glucose, C2, C3, C4 and C5 are asymmetric carbon atoms. Each is connected to four different groups, producing stereochemical distinctions along the carbon chain. C1 is originally an aldehydic carbonyl carbon and therefore is not a tetrahedral asymmetric centre.
\(\textbf{Formation of the cyclic hemiacetal:}\)
Intramolecular addition of the C5 hydroxyl group to the C1 aldehydic group changes C1 from a trigonal-planar carbonyl carbon into a tetrahedral hemiacetal carbon. This creates a new stereogenic centre at C1.
\(\textbf{Anomeric possibilities:}\)
The newly formed centre can possess two configurations, producing alpha-D-glucose and beta-D-glucose. These two forms differ specifically in the arrangement at C1, the anomeric carbon.
\(\textbf{Configuration of the original centres:}\)
The ordinary cyclisation process does not require inversion of C2, C3, C4 or C5. Their original configurations are retained. C6 remains a terminal –CH₂OH carbon and does not become asymmetric merely because it lies outside the ring.
\(\textbf{Stereochemical implication:}\)
The cyclic structure therefore introduces an additional stereochemical distinction while preserving the original D-series configuration. Anomerism arises from the new C1 centre rather than from inversion of the reference configuration at C5.
62. Two stereoisomeric forms of glucose are compared:
P and Q differ only in configuration at C1 in their cyclic hemiacetal forms.
P and R differ only in configuration at C2, while their configurations at C3, C4 and C5 are the same.
Which interpretation is correct?
ⓐ. Both pairs are anomeric because they differ at only one asymmetric carbon.
ⓑ. P and Q are enantiomers, whereas P and R are anomers.
ⓒ. P and Q are anomers, whereas the C2 difference between P and R represents a different stereochemical relationship.
ⓓ. Both pairs must interconvert by ordinary ring opening and reclosure at C1 without any other stereochemical change.
Correct Answer: P and Q are anomers, whereas the C2 difference between P and R represents a different stereochemical relationship.
Explanation: Anomerism is a particular stereochemical relationship associated with cyclic carbohydrates. It arises when two cyclic forms differ in configuration at the anomeric carbon, which is produced from the carbonyl carbon during cyclisation. For glucose, the anomeric carbon is C1. P and Q differ only at this carbon and are therefore anomers. The difference between P and R occurs at C2 rather than at C1. Such a difference does not constitute anomerism because C2 is not the anomeric centre of glucose. Stereoisomers differing at only one stereogenic centre are described as epimers; hence the C2 difference represents epimerism. Although anomers can also be described as a special class of epimers, their defining difference must occur at the anomeric carbon. Ordinary interconversion between alpha and beta glucose proceeds through opening and reclosure of the cyclic hemiacetal. This process changes the configuration at C1 but does not ordinarily invert the configuration at C2. Therefore, P and R cannot be considered anomers merely because they differ at one stereogenic centre. The example demonstrates why identifying the position of a stereochemical difference is as important as counting the number of differing centres.
63. Glucose can be obtained by complete hydrolysis of either sucrose or starch. Two samples are treated separately under conditions ensuring quantitative hydrolysis.
Sample P: \(34.2\ \mathrm{g}\) of pure sucrose, having molar mass \(342\ \mathrm{g\,mol^{-1}}\).
Sample Q: \(16.2\ \mathrm{g}\) of pure starch, represented by \((\mathrm{C_6H_{10}O_5})_n\), where each anhydroglucose unit contributes \(162\ \mathrm{g\,mol^{-1}}\).
Molar mass of glucose = \(180\ \mathrm{g\,mol^{-1}}\).
Which statement correctly compares the theoretical glucose yields?
ⓐ. P produces \(18.0\ \mathrm{g}\) glucose; Q produces \(9.0\ \mathrm{g}\) glucose.
ⓑ. P produces \(18.0\ \mathrm{g}\) glucose; Q produces \(18.0\ \mathrm{g}\) glucose.
ⓒ. P produces \(36.0\ \mathrm{g}\) glucose; Q produces \(18.0\ \mathrm{g}\) glucose.
ⓓ. P produces \(36.0\ \mathrm{g}\) glucose; Q produces \(36.0\ \mathrm{g}\) glucose.
Correct Answer: P produces \(18.0\ \mathrm{g}\) glucose; Q produces \(18.0\ \mathrm{g}\) glucose.
Explanation: \(\textbf{Hydrolysis relationship for sucrose:}\)
Sucrose undergoes hydrolysis to produce one molecule of glucose and one molecule of fructose per sucrose molecule.
The balanced reaction is:
\[
\mathrm{C_{12}H_{22}O_{11}+H_2O\rightarrow C_6H_{12}O_6+C_6H_{12}O_6}
\]
The two product formulas represent glucose and fructose, respectively.
\(\textbf{Moles of sucrose in P:}\)
\[
n_{\mathrm{sucrose}}=\frac{34.2}{342}
\]
\[
n_{\mathrm{sucrose}}=0.10\ \mathrm{mol}
\]
One mole of sucrose gives one mole of glucose.
Therefore:
\[
n_{\mathrm{glucose,P}}=0.10\ \mathrm{mol}
\]
\[
m_{\mathrm{glucose,P}}=0.10\times180
\]
\[
m_{\mathrm{glucose,P}}=18.0\ \mathrm{g}
\]
\(\textbf{Hydrolysis relationship for starch:}\)
Starch is a glucose-based polysaccharide. Complete hydrolysis releases one glucose molecule per anhydroglucose unit.
The reaction is:
\[
\mathrm{(C_6H_{10}O_5)_n+nH_2O\rightarrow nC_6H_{12}O_6}
\]
\(\textbf{Anhydroglucose-unit accounting in Q:}\)
The supplied starch mass corresponds to:
\[
n_{\mathrm{units}}=\frac{16.2}{162}
\]
\[
n_{\mathrm{units}}=0.10\ \mathrm{mol}
\]
Thus, complete hydrolysis produces:
\[
n_{\mathrm{glucose,Q}}=0.10\ \mathrm{mol}
\]
\[
m_{\mathrm{glucose,Q}}=0.10\times180
\]
\[
m_{\mathrm{glucose,Q}}=18.0\ \mathrm{g}
\]
\(\textbf{Chemical and mass checks:}\)
Sample P also produces \(0.10\ \mathrm{mol}\) of fructose, equivalent to \(18.0\ \mathrm{g}\). The total monosaccharide mass is therefore \(36.0\ \mathrm{g}\), exceeding the original sucrose mass by \(1.8\ \mathrm{g}\) because water participates in hydrolysis.
Sample Q also incorporates water during hydrolysis. The glucose mass therefore exceeds the original starch mass by the water-derived mass contribution.
The glucose yields are equal even though the starting carbohydrate masses and the identities of the other hydrolysis products differ.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{glucose,P}}=m_{\mathrm{glucose,Q}}=18.0\ \mathrm{g}}
\]
64. One sample of D-glucose is treated with hydroxylamine to form an oxime, while a second sample is treated with HCN to form a cyanohydrin. Both reactions occur through the carbonyl-containing open-chain form of glucose.
Which conclusion correctly compares the carbon skeletons of the products and the structural evidence supplied by these reactions?
ⓐ. Both products contain six carbon atoms; either reaction independently establishes aldehydic functionality.
ⓑ. The oxime contains seven carbon atoms and the cyanohydrin contains six; neither reaction identifies carbonyl type.
ⓒ. The oxime contains six carbon atoms and the cyanohydrin contains seven; neither reaction alone distinguishes aldehydes from ketones.
ⓓ. Both products contain seven carbon atoms; the increase in carbon count independently establishes aldehydic functionality.
Correct Answer: The oxime contains six carbon atoms and the cyanohydrin contains seven; neither reaction alone distinguishes aldehydes from ketones.
Explanation: \(\textbf{Oxime formation:}\)
Hydroxylamine reacts with the carbonyl group of glucose to form an oxime. The carbonyl oxygen is replaced through a condensation process involving the nitrogen-containing reagent, but no carbon atom is introduced into the glucose skeleton. Consequently, the glucose-derived oxime retains six carbon atoms.
\(\textbf{Cyanohydrin formation:}\)
HCN adds across the carbonyl group, introducing a cyanide-derived carbon atom bonded to the former carbonyl carbon. The original six-carbon glucose skeleton remains intact, while the cyanide group contributes one additional carbon atom. Therefore, the cyanohydrin contains seven carbon atoms in total.
\(\textbf{Structural significance:}\)
Both aldehydes and ketones can undergo oxime formation and cyanohydrin formation. Hence, these two reactions establish the availability of carbonyl functionality but cannot independently establish whether the starting carbonyl group was aldehydic or ketonic. Glucose is identified as an aldose through additional evidence, particularly mild oxidation with bromine water to gluconic acid.
\(\textbf{Combined conclusion:}\)
The two addition reactions supply related information about carbonyl reactivity but different carbon-count consequences. Distinguishing these consequences prevents the incorrect assumption that every carbonyl-related transformation either preserves or increases the carbon skeleton. The correct interpretation combines the six-carbon oxime, seven-carbon cyanohydrin and limited functional-group specificity of the two reactions.
65. The mutarotation of glucose is studied using two initially pure cyclic anomers.
The horizontal axis represents time after dissolution, and the vertical axis represents specific optical rotation in degrees.
Curve P starts at \(+112.0^\circ\) and decreases continuously towards \(+52.5^\circ\).
Curve Q starts at \(+18.5^\circ\) and increases continuously towards \(+52.5^\circ\).
Both curves approach the same limiting value.
Assume the equilibrium solution contains only the two cyclic anomers for the purpose of calculating optical rotation, and their specific rotations contribute additively according to mass fraction.
What is the approximate percentage of the alpha anomer in the final equilibrium mixture?
ⓐ. \(26.3\%\)
ⓑ. \(36.4\%\)
ⓒ. \(50.0\%\)
ⓓ. \(63.6\%\)
Correct Answer: \(36.4\%\)
Explanation: \(\textbf{Identifying the anomeric contributions:}\)
The two starting solutions contain different anomers of glucose. Their specific rotations are \(+112.0^\circ\) and \(+18.5^\circ\), respectively. The alpha form has the higher initial positive rotation in this supplied data.
Both solutions approach the same final optical rotation, indicating establishment of the same equilibrium composition under identical conditions.
\(\textbf{Mixture relation:}\)
Let \(x\) be the equilibrium mass fraction of the alpha anomer.
The beta-anomer fraction is therefore \(1-x\).
Under the stated additive approximation:
\[
[\alpha]_{\mathrm{mix}}=x[\alpha]_{\alpha}+(1-x)[\alpha]_{\beta}
\]
\(\textbf{Substitution of the rotation data:}\)
\[
52.5=112.0x+18.5(1-x)
\]
\[
52.5=112.0x+18.5-18.5x
\]
\[
52.5-18.5=93.5x
\]
\[
34.0=93.5x
\]
\(\textbf{Equilibrium fraction:}\)
\[
x=\frac{34.0}{93.5}=0.3636
\]
Converting the fraction into a percentage:
\[
100x=36.36\%\approx36.4\%
\]
\(\textbf{Chemical interpretation:}\)
The equilibrium mixture contains both cyclic anomers rather than equal amounts of each. Their interconversion involves opening of the cyclic hemiacetal to an open-chain form followed by ring closure. C1 can acquire either anomeric configuration during reclosure, while the D-series configuration remains unchanged. The common final rotation does not imply that the two anomers possess identical individual rotations.
\(\textbf{Final answer:}\)
\[
\boxed{\text{Alpha anomer}\approx36.4\%}
\]
66. A student compares glucose, cyclohexane and glucose pentaacetate. The student argues that the six-membered cyclic structure of glucose should make its interactions with water similar to those of cyclohexane.
Which interpretation correctly accounts for the relevant structural differences?
ⓐ. Glucose: ring size controls water solubility; acetylation: introduces free hydroxyl donors.
ⓑ. Glucose: a free aldehyde is essential for hydration; acetylation: generates additional aldehydes.
ⓒ. Glucose: cyclic oxygen eliminates molecular polarity; acetylation: produces ionic hydroxyl groups.
ⓓ. Glucose: multiple hydroxyl groups hydrogen-bond with water; acetylation: removes these hydrogen-bond donors.
Correct Answer: Glucose: multiple hydroxyl groups hydrogen-bond with water; acetylation: removes these hydrogen-bond donors.
Explanation: The presence of a six-membered ring does not determine a molecule's complete polarity or its interactions with water. Cyclohexane consists of carbon and hydrogen atoms and has no hydroxyl groups capable of forming strong hydrogen bonds with water. Glucose, by contrast, contains five hydroxyl groups distributed throughout its structure. These hydroxyl groups can participate in extensive hydrogen bonding with surrounding water molecules. Glucose therefore exhibits strong hydrophilic character despite possessing a cyclic carbon framework. Its predominant cyclic form does not need a permanently available free aldehyde group to explain these interactions. Acetylation converts the free alcoholic hydroxyl groups, including the anomeric hydroxyl in glucose pentaacetate, into ester-type groups. These ester groups retain polar oxygen atoms capable of accepting hydrogen bonds, but they no longer possess the original hydroxyl hydrogen-bond donors. Consequently, acetylation changes the pattern of solute–water interactions without removing the six-carbon skeleton. The chemical lesson is that ring size alone is insufficient to predict water solubility; the nature, number and availability of polar functional groups must also be considered.
67. Consider three related six-carbon compounds represented by their open-chain structures:
P: \(\mathrm{CHO-(CHOH)_4-CH_2OH}\)
Q: \(\mathrm{COOH-(CHOH)_4-CH_2OH}\)
R: \(\mathrm{COOH-(CHOH)_4-COOH}\)
P represents glucose, Q its mild aldehyde-oxidation product, and R its terminally oxidised dicarboxylic acid.
Which option correctly gives the number of alcoholic hydroxyl groups and carboxylic acid groups, respectively, in P, Q and R?
ⓐ. Alcoholic –OH: 5, 4, 4; –COOH: 0, 1, 2
ⓑ. Alcoholic –OH: 5, 5, 5; –COOH: 0, 1, 2
ⓒ. Alcoholic –OH: 5, 5, 4; –COOH: 0, 1, 2
ⓓ. Alcoholic –OH: 5, 5, 4; –COOH: 1, 1, 2
Correct Answer: Alcoholic –OH: 5, 5, 4; –COOH: 0, 1, 2
Explanation: \(\textbf{Functional groups in P:}\)
Glucose contains an aldehydic group at C1, four secondary alcoholic hydroxyl groups at C2–C5 and one primary alcoholic hydroxyl group at C6. Therefore, P contains five alcoholic hydroxyl groups and no carboxylic acid group.
\(\textbf{Selective oxidation producing Q:}\)
Mild oxidation of the C1 aldehyde produces gluconic acid. The oxidation changes the aldehydic group into a carboxylic acid group without oxidising the C6 primary alcohol. The hydroxyl groups attached to C2, C3, C4, C5 and C6 consequently remain alcoholic hydroxyl groups. Thus, Q contains five alcoholic hydroxyl groups and one carboxylic acid group.
\(\textbf{Further terminal oxidation producing R:}\)
Oxidation of the C6 primary alcoholic group produces a second carboxylic acid group. The resulting compound is saccharic acid, with carboxylic acid groups at both ends of the six-carbon chain. Only the four secondary alcoholic hydroxyl groups at C2–C5 remain. Therefore, R contains four alcoholic hydroxyl groups and two carboxylic acid groups.
\(\textbf{Classification check:}\)
A hydroxyl group that is part of a carboxylic acid functional group is not counted as an alcoholic hydroxyl group. Confusing these two types of –OH functionality leads to an incorrect group count. The total carbon count remains six in all three compounds, but their oxygen-containing functional groups change during oxidation. The correct group accounting therefore distinguishes the unchanged secondary alcohols from the terminal groups undergoing oxidation.
68. Fructose normally forms the NCERT-described five-membered furanose ring through intramolecular addition of its C5 hydroxyl group to the C2 ketonic carbonyl group.
Now consider a hypothetical alternative cyclisation in which the C6 hydroxyl group attacks C2 instead. Assume that the required intramolecular geometry is accessible and the carbon skeleton remains unchanged.
Which cyclic structure would this alternative pathway produce?
ⓐ. A five-membered hemiketal with C2 as the anomeric carbon
ⓑ. A five-membered hemiacetal with C6 as the anomeric carbon
ⓒ. A six-membered hemiacetal with C1 as the anomeric carbon
ⓓ. A six-membered hemiketal with C2 as the anomeric carbon
Correct Answer: A six-membered hemiketal with C2 as the anomeric carbon
Explanation: \(\textbf{Initial fructose structure:}\)
Fructose is a ketohexose containing a ketonic carbonyl group at C2 in its open-chain representation. Its anomeric carbon in a cyclic hemiketal is therefore derived from C2 rather than C1.
\(\textbf{Usual cyclisation pathway:}\)
In the NCERT-described furanose form, the hydroxyl group attached to C5 attacks the C2 carbonyl carbon. The cyclic path contains C2, C3, C4, C5 and one oxygen atom. This gives a five-membered hemiketal ring.
\(\textbf{Modified cyclisation pathway:}\)
The question changes the attacking hydroxyl group from C5 to C6. The corresponding cyclic path now contains C2, C3, C4, C5, C6 and the oxygen atom originating from the C6 hydroxyl group.
Therefore, the number of ring members is:
\[
N_{\mathrm{ring}}=5\ \text{carbon atoms}+1\ \text{oxygen atom}=6
\]
\(\textbf{Functional-group identification:}\)
The carbonyl compound undergoing intramolecular addition remains a ketose. Hence, the cyclic product is a hemiketal rather than a hemiacetal. The original ketonic carbon C2 becomes the hemiketal centre and retains its identity as the anomeric carbon.
\(\textbf{Structural conclusion:}\)
Changing the attacking hydroxyl position changes the ring size but does not change the original carbonyl class. The alternative cyclisation therefore gives a six-membered fructopyranose-type hemiketal with anomeric carbon C2.
69. Glucose and fructose both contain six carbon atoms but form the commonly described cyclic structures through different intramolecular additions.
Structure P: The C5 hydroxyl oxygen of glucose forms a bond to C1, producing the usual six-membered glucopyranose ring.
Structure Q: The C5 hydroxyl oxygen of fructose forms a bond to C2, producing the usual five-membered fructofuranose ring.
In each structure, the carbon skeleton retains all six original carbon atoms.
Which option correctly identifies the carbon atoms lying outside the rings of P and Q?
ⓐ. P: C1 only; Q: C1 and C6
ⓑ. P: C6 only; Q: C1 and C6
ⓒ. P: C6 only; Q: C1 only
ⓓ. P: C1 and C6; Q: C6 only
Correct Answer: P: C6 only; Q: C1 and C6
Explanation: \(\textbf{Ring composition in glucose:}\)
The usual pyranose ring of glucose forms when its C5 hydroxyl group adds to the aldehydic carbon at C1. The ring therefore contains carbon atoms C1, C2, C3, C4 and C5, together with one oxygen atom. Carbon C6 remains outside the ring as the carbon of a hydroxymethyl substituent attached to C5.
\(\textbf{Ring composition in fructose:}\)
In the commonly described fructofuranose form, the C5 hydroxyl group reacts with the ketonic carbonyl group at C2. The ring contains C2, C3, C4 and C5, together with one oxygen atom. Carbon C1 remains outside the ring as a hydroxymethyl substituent attached to C2. Carbon C6 also remains outside the ring as a hydroxymethyl substituent attached to C5.
\(\textbf{Comparison of the two structures:}\)
Glucopyranose therefore has five carbon atoms within its six-membered ring and one carbon atom outside it. Fructofuranose has four carbon atoms within its five-membered ring and two carbon atoms outside it. In both cases, the total molecular carbon count remains six.
\(\textbf{Chemical significance:}\)
Ring size is determined by the atoms included in the intramolecular cyclic path rather than by the total carbon count of the monosaccharide. The position of the original carbonyl group is also important because it determines which carbon becomes the anomeric centre. The correct comparison consequently identifies C6 as external in glucopyranose and both C1 and C6 as external in fructofuranose.
70. Free D-fructose gives a positive Fehling's test under suitable alkaline conditions. In sucrose, however, the fructose residue is connected through its C2 anomeric centre to the C1 anomeric centre of glucose.
Consider the following statements.
Statement I: Free fructose can show reducing behaviour through its alkaline rearrangement to aldose forms.
Statement II: Participation of fructose C2 in the sucrose glycosidic bond prevents ordinary ring opening of that fructose residue while sucrose remains intact.
Statement III: The fructose residue in intact sucrose must retain the same reducing behaviour as free fructose because its six-carbon skeleton is unchanged.
Statement IV: Hydrolysis of sucrose releases a fructose molecule capable of exhibiting the reducing behaviour of a free ketose.
Which statements are correct?
ⓐ. I and III only
ⓑ. II and III only
ⓒ. I, II and IV only
ⓓ. II, III and IV only
Correct Answer: I, II and IV only
Explanation: Statement I is correct because free fructose is a reducing ketose. Under the alkaline conditions of Fehling's test, it can undergo enediol-mediated rearrangement to aldose forms capable of reducing the reagent. Statement II is correct because the anomeric carbon of fructose is C2. In sucrose, this carbon participates directly in the glycosidic linkage joining the fructose and glucose residues. The fructose unit therefore lacks a free hemiketal centre capable of ordinary ring opening while the linkage remains intact. Statement III is incorrect because retaining a carbon skeleton does not guarantee retaining the same chemical reactivity. Conversion of a free anomeric centre into a glycosidic acetal or ketal-type centre changes its ability to access a reactive open-chain form. The glucose residue in sucrose is also bonded through its anomeric carbon, so neither constituent provides the usual reducing functionality in the intact disaccharide. Statement IV is correct because hydrolysis cleaves the glycosidic linkage and releases free glucose and fructose. The liberated fructose can undergo its characteristic reducing-sugar chemistry under appropriate alkaline conditions. The key distinction is therefore between an unbound ketose and the same ketose incorporated through its anomeric carbon in a non-reducing disaccharide.
71. The molecular structures of glucose and fructose are compared with their arrangement in sucrose.
The first component is alpha-D-glucopyranose, with its anomeric carbon at C1.
The second component is beta-D-fructofuranose, with its anomeric carbon at C2.
A glycosidic oxygen connects C1 of the glucopyranose residue to C2 of the fructofuranose residue.
The anomeric configurations of the two residues are retained in the intact disaccharide.
Which description correctly identifies the linkage and its consequence?
ⓐ. An alpha-(1→4) linkage involving one anomeric centre; the disaccharide is reducing.
ⓑ. A beta-(1→4) linkage involving both anomeric centres; the disaccharide is non-reducing.
ⓒ. An alpha-(1→2) linkage involving both anomeric centres; the disaccharide is reducing.
ⓓ. An alpha-glucosyl-(1→2)-beta-fructosyl linkage involving both anomeric centres; the disaccharide is non-reducing.
Correct Answer: An alpha-glucosyl-(1→2)-beta-fructosyl linkage involving both anomeric centres; the disaccharide is non-reducing.
Explanation: \(\textbf{Identification of the participating centres:}\)
The anomeric carbon of glucose is C1 because this carbon originates from the aldehydic carbonyl group of the open-chain aldose. The anomeric carbon of fructose is C2 because it originates from the ketonic carbonyl group of the open-chain ketose.
\(\textbf{Linkage identity:}\)
The supplied arrangement joins glucose C1 to fructose C2 through an oxygen atom. The glucose component has the alpha anomeric configuration, while the fructose component has the beta anomeric configuration. This is the characteristic linkage arrangement present in sucrose.
\(\textbf{Consequence for glucose:}\)
Participation of glucose C1 in the glycosidic bond converts its free hemiacetal functionality into a glycosidic acetal-type centre. It can no longer undergo ordinary ring opening to release a free aldehydic form while the disaccharide remains intact.
\(\textbf{Consequence for fructose:}\)
Fructose C2 also participates directly in the linkage. Its free hemiketal functionality is therefore unavailable for the usual ring-opening process.
\(\textbf{Reducing-character deduction:}\)
Since both constituent anomeric centres are engaged, sucrose is non-reducing. This property is not a consequence of either glucose or fructose being intrinsically non-reducing as free monosaccharides. It arises from the particular glycosidic connectivity of the intact disaccharide.
72. An initially pure sucrose solution is allowed to undergo partial hydrolysis. Let \(f\) represent the fraction of the original sucrose molecules that have undergone hydrolysis.
The specific rotations under the stated experimental conditions are:
Sucrose: \(+66.5^\circ\)
Glucose: \(+52.5^\circ\)
Fructose: \(-92.4^\circ\)
Assume constant solution volume, the same optical path length, ideal additivity of optical-rotation contributions and no other optically active species.
At approximately what percentage hydrolysis will the observed optical rotation become zero?
ⓐ. \(24\%\)
ⓑ. \(50\%\)
ⓒ. \(76\%\)
ⓓ. \(100\%\)
Correct Answer: \(76\%\)
Explanation: \(\textbf{Hydrolysis stoichiometry:}\)
One molecule of sucrose produces one glucose molecule and one fructose molecule.
Take one mole of sucrose initially.
If fraction \(f\) undergoes hydrolysis, the remaining amount of sucrose is:
\[
n_{\mathrm{sucrose}}=1-f
\]
The amounts of glucose and fructose formed are:
\[
n_{\mathrm{glucose}}=f,\qquad n_{\mathrm{fructose}}=f
\]
\(\textbf{Masses contributing to optical rotation:}\)
Using molar masses \(342\ \mathrm{g\,mol^{-1}}\) for sucrose and \(180\ \mathrm{g\,mol^{-1}}\) for each hexose:
\[
m_{\mathrm{sucrose}}=342(1-f)\ \mathrm{g}
\]
\[
m_{\mathrm{glucose}}=180f\ \mathrm{g}
\]
\[
m_{\mathrm{fructose}}=180f\ \mathrm{g}
\]
\(\textbf{Optical cancellation condition:}\)
At fixed volume and path length, the observed rotation is proportional to the sum of the mass-weighted specific-rotation contributions.
The rotation becomes zero when:
\[
342(1-f)(66.5)+180f(52.5)-180f(92.4)=0
\]
\(\textbf{Simplification:}\)
\[
22743(1-f)+9450f-16632f=0
\]
\[
22743-22743f-7182f=0
\]
\[
22743=29925f
\]
\[
f=\frac{22743}{29925}=0.760
\]
\(\textbf{Percentage hydrolysis:}\)
\[
100f=76.0\%
\]
\(\textbf{Chemical verification:}\)
Before hydrolysis, sucrose gives a positive optical rotation. After complete hydrolysis, the negative contribution from fructose exceeds the positive contribution from glucose, making the mixture laevorotatory. Therefore, there must be an intermediate extent of hydrolysis at which these opposing contributions exactly cancel. The calculated value lies between zero and complete hydrolysis, as required.
\(\textbf{Final answer:}\)
\[
\boxed{76.0\%\ \text{hydrolysis}}
\]
73. Sucrose is hydrolysed completely under suitable acidic conditions to give invert sugar.
Consider the following statements about the chemical and optical changes.
Statement I: The product mixture contains equimolar D-(+)-glucose and D-(–)-fructose.
Statement II: The optical inversion occurs because glucose changes from D-configuration to L-configuration during hydrolysis.
Statement III: The hydrolysate is laevorotatory because the magnitude of fructose's negative specific rotation exceeds glucose's positive specific rotation.
Statement IV: The hydrolysate exhibits reducing behaviour even though the original sucrose is non-reducing.
Which statements are correct?
ⓐ. I, III and IV only
ⓑ. I, II and III only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, III and IV only
Explanation: Statement I is correct because complete hydrolysis of sucrose produces one molecule of glucose and one molecule of fructose per sucrose molecule. The resulting monosaccharides are therefore present in equimolar amounts. Statement II is incorrect because hydrolysis does not require conversion of D-glucose into L-glucose. The D/L configuration of each constituent is not the reason for the observed optical inversion. Statement III is correct because sucrose is dextrorotatory, whereas the equimolar glucose–fructose hydrolysate is laevorotatory. Under the NCERT comparison conditions, D-glucose has specific rotation \(+52.5^\circ\), while D-fructose has specific rotation \(-92.4^\circ\). The magnitude of fructose's negative contribution is therefore greater than the positive contribution from glucose. The resulting mixture has a negative net optical rotation and is called invert sugar. Statement IV is correct because the glycosidic bond of sucrose initially involves both anomeric centres, making sucrose non-reducing. Hydrolysis releases the free monosaccharides, which can exhibit reducing behaviour under the appropriate test conditions. Thus, hydrolysis produces two related but distinct changes: liberation of reducing sugar units and reversal of the sign of optical rotation. Neither change requires an inversion of the D/L configuration of the constituent monosaccharides.
74. Two equal portions of an aqueous sucrose solution are treated differently.
Portion P is maintained under conditions in which sucrose remains chemically intact.
Portion Q is subjected to complete enzymatic hydrolysis and is then maintained under conditions permitting equilibration of its monosaccharide products.
Both portions are subsequently examined for ordinary mutarotation and reducing behaviour.
Which comparison is correct?
ⓐ. P undergoes ordinary anomeric mutarotation and is reducing; Q has neither property.
ⓑ. P is non-reducing and does not undergo ordinary anomeric mutarotation; Q contains reducing monosaccharides capable of mutarotation.
ⓒ. P is non-reducing but undergoes ordinary anomeric mutarotation; Q is reducing but cannot undergo mutarotation.
ⓓ. P is reducing because sucrose contains glucose; Q becomes non-reducing when fructose is liberated.
Correct Answer: P is non-reducing and does not undergo ordinary anomeric mutarotation; Q contains reducing monosaccharides capable of mutarotation.
Explanation: \(\textbf{Chemical state of intact sucrose:}\)
Sucrose contains a glycosidic linkage joining the anomeric carbon of glucose to the anomeric carbon of fructose. Both anomeric centres are engaged in the linkage. Consequently, neither residue possesses the free hemiacetal or hemiketal centre needed for ordinary ring opening while sucrose remains intact.
\(\textbf{Consequences for Portion P:}\)
Portion P therefore remains non-reducing under ordinary reducing-sugar test conditions. It also does not undergo ordinary mutarotation through interconversion of free alpha and beta anomeric forms. This does not imply that sucrose is optically inactive; intact sucrose is itself dextrorotatory.
\(\textbf{Consequences of hydrolysis in Portion Q:}\)
Complete enzymatic hydrolysis cleaves the glycosidic linkage and releases glucose and fructose. These monosaccharides regain their free anomeric functionalities. Glucose can interconvert between its cyclic anomers through ring opening to an aldehydic form. Fructose can similarly access cyclic and open-chain ketonic forms.
\(\textbf{Connection to reducing behaviour:}\)
The liberated monosaccharides are reducing sugars under the appropriate test conditions. Their reducing behaviour does not require them to remain permanently in open-chain structures. Instead, the corresponding reactive forms become accessible through solution equilibria and, for fructose under alkaline conditions, through suitable rearrangement.
\(\textbf{Integrated conclusion:}\)
The same hydrolysis event changes both anomeric-centre availability and reducing behaviour. However, mutarotation and reducing behaviour describe different chemical phenomena and should not be treated as synonymous.
75. Three pure disaccharides P, Q and R have the molecular formula \(\mathrm{C_{12}H_{22}O_{11}}\). Their properties are recorded below.
| Disaccharide | Complete hydrolysis products | Fehling's test before hydrolysis |
| P | Glucose and fructose | Negative |
| Q | Galactose and glucose | Positive |
| R | Glucose and glucose | Positive |
Which identification is consistent with both sets of observations?
ⓐ. P—Lactose; Q—Sucrose; R—Maltose
ⓑ. P—Sucrose; Q—Maltose; R—Lactose
ⓒ. P—Maltose; Q—Lactose; R—Sucrose
ⓓ. P—Sucrose; Q—Lactose; R—Maltose
Correct Answer: P—Sucrose; Q—Lactose; R—Maltose
Explanation: \(\textbf{Identification of P:}\)
P produces glucose and fructose on complete hydrolysis. This is the characteristic constituent composition of sucrose. Its negative Fehling's test is also consistent with sucrose because the glycosidic linkage joins glucose C1 to fructose C2. Both anomeric centres are engaged, making intact sucrose non-reducing.
\(\textbf{Identification of Q:}\)
Q produces galactose and glucose on hydrolysis. This identifies lactose, the disaccharide commonly known as milk sugar. In lactose, the C1 anomeric centre of galactose is linked to C4 of glucose. The glucose residue retains a free anomeric centre, so lactose is reducing.
\(\textbf{Identification of R:}\)
R produces two glucose molecules on complete hydrolysis. This composition corresponds to maltose. Maltose contains an alpha-(1→4) glycosidic linkage between two glucose residues. One glucose anomeric centre remains free, allowing the intact disaccharide to exhibit reducing behaviour.
\(\textbf{Combined chemical interpretation:}\)
All three compounds have the same molecular formula and contain two constituent monosaccharide units. Their distinguishing features are the identities of those units and the connectivity of the glycosidic bonds. Reducing behaviour supplies information about free anomeric-centre availability, whereas hydrolysis reveals the constituent monosaccharides. Using both observations gives an unambiguous identification of P as sucrose, Q as lactose and R as maltose.
76. Lactose consists of a beta-D-galactose residue joined through its C1 anomeric carbon to C4 of a D-glucose residue.
Consider the following Assertion and Reason.
Assertion (A): Lactose can undergo reducing-end mutarotation in suitable aqueous solution without cleavage of its galactose–glucose glycosidic linkage.
Reason (R): The glucose residue retains a free anomeric centre at C1, permitting ring opening and reclosure while the glycosidic bond involving glucose C4 remains intact.
Choose the correct option.
ⓐ. Both A and R are true, and R is the correct explanation of A.
ⓑ. Both A and R are true, but R is not the correct explanation of A.
ⓒ. A is true, but R is false.
ⓓ. A is false, but R is true.
Correct Answer: Both A and R are true, and R is the correct explanation of A.
Explanation: The Assertion is true because lactose is a reducing disaccharide possessing a free anomeric centre on its glucose residue. The glycosidic linkage connects the anomeric carbon C1 of galactose to the non-anomeric carbon C4 of glucose. Consequently, the galactose anomeric centre is engaged in the linkage, whereas the glucose anomeric centre remains free. A free cyclic hemiacetal at glucose C1 can undergo reversible ring opening to produce a corresponding open-chain aldehydic form. Subsequent ring closure can regenerate either anomeric configuration at the reducing glucose end. This process allows mutarotation without requiring cleavage of the existing galactose–glucose glycosidic linkage. The Reason is therefore true and supplies the chemical explanation for the Assertion. The important distinction is between ring opening at a free hemiacetal centre and hydrolysis of a glycosidic bond. These are different chemical transformations. Hydrolysis would separate the constituent monosaccharides, whereas reducing-end mutarotation changes the configuration at the free anomeric centre while preserving the disaccharide connectivity. Thus, lactose can remain a disaccharide throughout the mutarotation process.
77. Maltose consists of two D-glucose residues connected by an alpha-(1→4) glycosidic linkage. In suitable aqueous solution, its reducing end can exist in different anomeric forms.
Which statement correctly describes the structural change involved in this process?
ⓐ. The C1–C4 glycosidic linkage repeatedly changes from alpha to beta while both anomeric centres remain bonded.
ⓑ. The non-reducing glucose residue converts into fructose through rearrangement of its carbonyl group.
ⓒ. The free C1 centre of the second glucose residue changes anomeric configuration, while the original alpha-(1→4) linkage remains intact.
ⓓ. The two glucose residues exchange positions through complete hydrolysis followed by condensation.
Correct Answer: The free C1 centre of the second glucose residue changes anomeric configuration, while the original alpha-(1→4) linkage remains intact.
Explanation: \(\textbf{Original maltose connectivity:}\)
Maltose contains two glucose residues joined by a glycosidic bond involving C1 of the first glucose unit and C4 of the second. The first glucose residue contributes an alpha-configured anomeric centre to the linkage. Its anomeric configuration is therefore fixed while the glycosidic bond remains intact.
\(\textbf{Reducing-end functionality:}\)
The C1 anomeric centre of the second glucose residue is not involved in the glycosidic linkage. It retains free hemiacetal functionality and can undergo ring opening in aqueous solution. This allows an open-chain aldehydic form to become available at the reducing end.
\(\textbf{Anomeric interconversion:}\)
Ring closure of the open-chain reducing-end residue can produce either configuration at its C1 centre. Consequently, the reducing end can interconvert between alpha and beta anomeric arrangements. This does not require an inversion of the already established glycosidic bond.
\(\textbf{Chemical consequence:}\)
Maltose remains a disaccharide during the interconversion. Its two constituent glucose residues are not liberated unless hydrolysis of the glycosidic bond occurs. The process also does not require conversion of either glucose residue into fructose. Therefore, reducing-end mutarotation and glycosidic linkage configuration must be treated as separate structural properties.
\(\textbf{Key distinction:}\)
The alpha designation of the maltose glycosidic linkage describes the configuration of the bonded anomeric centre of the first glucose residue. It does not prevent the other glucose residue from undergoing anomeric interconversion at its free reducing end.
78. An equimolar mixture contains one molecule each of sucrose, lactose and maltose for every representative set of three disaccharide molecules.
Two hypothetical enzymes E and F possess the following strict specificities:
Enzyme E cleaves only the alpha-(1→4) glycosidic linkage joining two glucose residues.
Enzyme F cleaves only the beta-(1→4) glycosidic linkage joining galactose to glucose.
The mixture is treated successively with E and F until all susceptible disaccharides have been completely hydrolysed. No nonenzymatic hydrolysis or further conversion of monosaccharides occurs.
Which final outcome is correct for each original set containing one molecule of each disaccharide?
ⓐ. Sucrose remains intact; three glucose molecules and one galactose molecule are released.
ⓑ. Lactose remains intact; three glucose molecules and one fructose molecule are released.
ⓒ. Maltose remains intact; two glucose molecules, one galactose molecule and one fructose molecule are released.
ⓓ. Sucrose remains intact; two glucose molecules, one galactose molecule and one fructose molecule are released.
Correct Answer: Sucrose remains intact; three glucose molecules and one galactose molecule are released.
Explanation: \(\textbf{Identification of the enzyme E substrate:}\)
Maltose consists of two glucose residues joined through an alpha-(1→4) glycosidic linkage. It therefore matches the specified substrate requirement of enzyme E. Complete hydrolysis of one maltose molecule produces two glucose molecules.
\(\textbf{Identification of the enzyme F substrate:}\)
Lactose contains a beta-(1→4) glycosidic linkage between galactose and glucose. It matches the strict specificity assigned to enzyme F. Hydrolysis of one lactose molecule produces one galactose molecule and one glucose molecule.
\(\textbf{Behaviour of sucrose:}\)
Sucrose contains a linkage between C1 of alpha-D-glucose and C2 of beta-D-fructose. This is neither the glucose–glucose alpha-(1→4) linkage recognised by E nor the galactose–glucose beta-(1→4) linkage recognised by F. Sucrose therefore remains intact under the specified conditions.
\(\textbf{Combined product accounting:}\)
Maltose hydrolysis supplies two glucose molecules. Lactose hydrolysis supplies one additional glucose molecule and one galactose molecule. Therefore, the combined liberated monosaccharides consist of three glucose molecules and one galactose molecule.
\(\textbf{Structural and reducing-character check:}\)
The intact sucrose molecule remains non-reducing because both its anomeric centres are engaged. The liberated glucose and galactose molecules are reducing monosaccharides. Consequently, the final mixture contains an intact non-reducing disaccharide together with free reducing monosaccharides.
\(\textbf{Conceptual importance:}\)
The example demonstrates that enzyme specificity depends on the chemical identity and arrangement of the glycosidic linkage, not merely on the fact that all three starting substances are disaccharides.
79. A mixture contains only maltose and lactose. Complete hydrolysis of the mixture produces \(0.32\ \mathrm{mol}\) of glucose and \(0.08\ \mathrm{mol}\) of galactose.
Maltose produces two glucose molecules per molecule, while lactose produces one glucose and one galactose molecule per molecule.
Given that the molar mass of both disaccharides is \(342\ \mathrm{g\,mol^{-1}}\), what was the original mass of maltose in the mixture?
ⓐ. \(27.36\ \mathrm{g}\)
ⓑ. \(34.20\ \mathrm{g}\)
ⓒ. \(54.72\ \mathrm{g}\)
ⓓ. \(41.04\ \mathrm{g}\)
Correct Answer: \(41.04\ \mathrm{g}\)
Explanation: \(\textbf{Hydrolysis relations:}\)
Maltose produces two glucose molecules on complete hydrolysis.
\[
\mathrm{Maltose+H_2O\rightarrow2Glucose}
\]
Lactose produces one glucose molecule and one galactose molecule.
\[
\mathrm{Lactose+H_2O\rightarrow Glucose+Galactose}
\]
\(\textbf{Identification from galactose production:}\)
Only lactose contributes galactose among the two starting disaccharides.
Since one mole of lactose produces one mole of galactose:
\[
n_{\mathrm{lactose}}=n_{\mathrm{galactose}}
\]
\[
n_{\mathrm{lactose}}=0.08\ \mathrm{mol}
\]
\(\textbf{Glucose supplied by lactose:}\)
Each lactose molecule also produces one glucose molecule.
Therefore:
\[
n_{\mathrm{glucose\ from\ lactose}}=0.08\ \mathrm{mol}
\]
\(\textbf{Glucose supplied by maltose:}\)
The total glucose produced is \(0.32\ \mathrm{mol}\).
Subtracting the lactose-derived glucose:
\[
n_{\mathrm{glucose\ from\ maltose}}=0.32-0.08
\]
\[
n_{\mathrm{glucose\ from\ maltose}}=0.24\ \mathrm{mol}
\]
\(\textbf{Moles of maltose:}\)
Each maltose molecule gives two glucose molecules.
Hence:
\[
n_{\mathrm{maltose}}=\frac{0.24}{2}
\]
\[
n_{\mathrm{maltose}}=0.12\ \mathrm{mol}
\]
\(\textbf{Required mass:}\)
Using \(m=nM\):
\[
m_{\mathrm{maltose}}=0.12\times342
\]
\[
m_{\mathrm{maltose}}=41.04\ \mathrm{g}
\]
\(\textbf{Consistency verification:}\)
The lactose present initially has mass:
\[
m_{\mathrm{lactose}}=0.08\times342=27.36\ \mathrm{g}
\]
The calculated disaccharide amounts would yield:
\[
n_{\mathrm{glucose}}=2(0.12)+0.08=0.32\ \mathrm{mol}
\]
\[
n_{\mathrm{galactose}}=0.08\ \mathrm{mol}
\]
Both results agree with the supplied hydrolysis observations. The calculation therefore satisfies both the constituent identity and the stoichiometric requirements.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{maltose}}=41.04\ \mathrm{g}}
\]
80. Three carbohydrate polymers P, Q and R are isolated from plants. Their properties are recorded below.
| Polymer | Structural observation | Behaviour in water |
| P | Unbranched alpha-D-glucose chains joined through C1–C4 linkages | Water-soluble component of starch |
| Q | Alpha-D-glucose chains having C1–C4 links and C1–C6 branch connections | Water-insoluble component of starch |
| R | Unbranched beta-D-glucose chains joined through C1–C4 linkages | Structural component of plant cell walls |
Which identification correctly accounts for all the observations?
ⓐ. P—Amylose; Q—Cellulose; R—Amylopectin
ⓑ. P—Cellulose; Q—Amylopectin; R—Amylose
ⓒ. P—Amylopectin; Q—Amylose; R—Cellulose
ⓓ. P—Amylose; Q—Amylopectin; R—Cellulose
Correct Answer: P—Amylose; Q—Amylopectin; R—Cellulose
Explanation: \(\textbf{Identification of P:}\)
Amylose is the water-soluble component of starch and consists of long, unbranched chains of alpha-D-glucose units. These units are connected through C1–C4 glycosidic linkages. P therefore corresponds to amylose.
\(\textbf{Identification of Q:}\)
Amylopectin is the branched component of starch. Its principal chains contain alpha-(1→4) glycosidic linkages, while branching involves alpha-(1→6) glycosidic linkages. NCERT describes amylopectin as the water-insoluble component of starch. Therefore, Q corresponds to amylopectin.
\(\textbf{Identification of R:}\)
Cellulose is a straight-chain polysaccharide composed of beta-D-glucose units joined through beta-(1→4) glycosidic linkages. It is a major structural constituent of plant cell walls. Hence, R is cellulose.
\(\textbf{Chemical comparison:}\)
All three polymers contain glucose-derived constituent units, and complete hydrolysis can produce glucose from each. Their different structures arise from the configuration and positions of their glycosidic linkages. Amylose and amylopectin differ principally in branching, while cellulose also differs in the anomeric configuration involved in linkage formation. Thus, constituent identity alone cannot explain their different physical properties and biological roles.
81. An enzyme E is specified to hydrolyse only alpha-(1→4) glycosidic bonds joining glucose residues. It cannot hydrolyse alpha-(1→6) or beta-(1→4) glycosidic bonds.
Equal amounts of amylose, amylopectin and cellulose are treated separately with E under suitable conditions.
Which prediction is consistent with the enzyme's stated specificity?
ⓐ. Amylose and amylopectin contain susceptible bonds, but cellulose does not.
ⓑ. Amylose and cellulose contain susceptible bonds, but amylopectin does not.
ⓒ. Amylopectin and cellulose contain susceptible bonds, but amylose does not.
ⓓ. All three contain susceptible bonds because all yield glucose on hydrolysis.
Correct Answer: Amylose and amylopectin contain susceptible bonds, but cellulose does not.
Explanation: The enzyme is defined by its ability to recognise a particular glycosidic linkage rather than merely the monosaccharide identity of the substrate. Amylose contains alpha-D-glucose units connected through alpha-(1→4) glycosidic bonds. These linkages match the stated specificity of E, so amylose contains susceptible bonds. Amylopectin also contains alpha-(1→4) linkages along its principal glucose chains. Consequently, E can hydrolyse these susceptible linkages in amylopectin. However, amylopectin additionally contains alpha-(1→6) branch linkages, which E cannot cleave under the stated conditions. Cellulose contains beta-(1→4) glycosidic linkages between glucose units. Although the carbon positions participating in the linkage are C1 and C4, the anomeric configuration differs from the alpha linkage recognised by E. Cellulose therefore lacks susceptible bonds for this particular enzyme. Complete chemical hydrolysis of all three carbohydrates can produce glucose, but identical hydrolysis products do not establish identical enzyme susceptibility. The important distinction is between the identity of a constituent monosaccharide and the stereochemical arrangement of the bond connecting constituent units. This example demonstrates how linkage specificity can distinguish glucose polymers that belong to the same broad carbohydrate class.
82. Two glucose-based storage polysaccharides P and Q are isolated from different biological sources.
P is a branched polysaccharide present in plant starch.
Q is a polysaccharide stored in animal tissues and has a structure resembling P but with a greater degree of branching.
Which statement correctly identifies the polymers and the structural inference?
ⓐ. P is amylose and Q is cellulose; both are unbranched polymers.
ⓑ. P is amylopectin and Q is glycogen; Q is more highly branched.
ⓒ. P is cellulose and Q is glycogen; both contain beta-(1→4) linkages.
ⓓ. P is glycogen and Q is amylopectin; P is less highly branched.
Correct Answer: P is amylopectin and Q is glycogen; Q is more highly branched.
Explanation: Starch is the principal storage polysaccharide of plants and contains two major components, amylose and amylopectin. Amylose is predominantly an unbranched polymer of alpha-D-glucose units. Amylopectin, in contrast, contains branched chains of alpha-D-glucose residues. Its principal chains contain alpha-(1→4) linkages, with alpha-(1→6) linkages at branch connections. Therefore, the branched component P of plant starch is amylopectin. Glycogen is the principal carbohydrate storage polysaccharide of animals and is often called animal starch. Its molecular structure resembles amylopectin but is more highly branched. This establishes the identity of Q as glycogen. Both polymers are glucose-based storage carbohydrates, so their common biological function is compatible with their related glycosidic organisation. However, identical constituent monosaccharides do not require identical degrees of branching. Cellulose is structurally different because its beta-(1→4)-linked glucose chains are associated primarily with structural support in plants. The comparison therefore identifies both the shared chemical features and the important structural difference between amylopectin and glycogen.
83. Consider the following statements about starch, cellulose and glycogen.
Statement I: Amylose is an unbranched component of starch containing alpha-(1→4) glycosidic linkages.
Statement II: Amylopectin contains alpha-(1→6) glycosidic linkages at branch points.
Statement III: Cellulose and amylose possess identical glycosidic stereochemistry because both are unbranched glucose polymers.
Statement IV: Glycogen is structurally related to amylopectin but is more highly branched.
Statement V: Complete hydrolysis of cellulose produces fructose because cellulose contains beta-glycosidic linkages.
Which statements are correct?
ⓐ. I, III and IV only
ⓑ. II, III and V only
ⓒ. I, II and IV only
ⓓ. I, II, IV and V only
Correct Answer: I, II and IV only
Explanation: Statement I is correct because amylose is the unbranched component of starch and contains alpha-D-glucose residues joined through alpha-(1→4) glycosidic linkages. Statement II is correct because amylopectin possesses branched chains, with alpha-(1→6) glycosidic linkages responsible for branch formation. Statement III is incorrect because amylose and cellulose differ in the stereochemistry of their glycosidic linkages. Amylose contains alpha-(1→4) linkages, whereas cellulose contains beta-(1→4) linkages. Their common unbranched character does not establish identical stereochemical structures. Statement IV is correct because glycogen is a highly branched glucose-storage polymer whose structure resembles amylopectin. NCERT specifically describes glycogen as more highly branched than amylopectin. Statement V is incorrect because cellulose consists of beta-D-glucose units. Hydrolysis cleaves its glycosidic bonds and liberates glucose, not fructose. The beta designation identifies the configuration involved in the glycosidic bond and does not indicate a ketose constituent. Thus, Statements I, II and IV correctly describe the three major structural relationships.
84. A hypothetical amylopectin molecule contains 16 glucose residues connected in a single branched structure without any cyclic glycosidic paths. Exactly three glycosidic connections are alpha-(1→6) branch linkages, and every remaining glycosidic connection is alpha-(1→4).
How many alpha-(1→4) glycosidic bonds are present in this molecule?
ⓐ. 11
ⓑ. 12
ⓒ. 13
ⓓ. 15
Correct Answer: 12
Explanation: \(\textbf{Structural information:}\)
The molecule contains 16 glucose residues connected in one continuous branched polysaccharide structure.
The problem explicitly states that no cyclic glycosidic paths are present.
\(\textbf{Total glycosidic-bond count:}\)
For a connected acyclic arrangement of \(n\) constituent units, the number of connections is:
\[
N_{\mathrm{total}}=n-1
\]
Substituting the given number of glucose residues:
\[
N_{\mathrm{total}}=16-1
\]
\[
N_{\mathrm{total}}=15
\]
\(\textbf{Branch-linkage accounting:}\)
The molecule contains three alpha-(1→6) glycosidic connections.
Therefore:
\[
N_{\alpha(1\rightarrow6)}=3
\]
The remaining connections are specified as alpha-(1→4) linkages.
\(\textbf{Determination of alpha-(1→4) linkages:}\)
\[
N_{\alpha(1\rightarrow4)}
=
N_{\mathrm{total}}-N_{\alpha(1\rightarrow6)}
\]
\[
N_{\alpha(1\rightarrow4)}=15-3
\]
\[
N_{\alpha(1\rightarrow4)}=12
\]
\(\textbf{Chemical verification:}\)
Each glycosidic connection joins two constituent units and contributes to the connected polymer structure. Branching changes which hydroxyl positions participate in these connections but does not introduce extra connections beyond the acyclic connectivity count. The calculated bonds satisfy:
\[
12+3=15
\]
This agrees with the total number required for 16 connected glucose residues.
\(\textbf{Final answer:}\)
\[
\boxed{12\ \alpha(1\rightarrow4)\ \text{glycosidic bonds}}
\]
85. Two hypothetical glucose polymers P and Q each contain exactly 12 glucose residues.
P is an unbranched chain, while Q is a connected branched structure containing alpha-(1→4) and alpha-(1→6) linkages.
Neither polymer contains a cyclic glycosidic path. Formation of every glycosidic bond eliminates one water molecule.
Given molar masses:
Glucose = \(180\ \mathrm{g\,mol^{-1}}\)
Water = \(18\ \mathrm{g\,mol^{-1}}\)
What is the difference between the molar masses of P and Q?
ⓐ. \(0\ \mathrm{g\,mol^{-1}}\)
ⓑ. \(18\ \mathrm{g\,mol^{-1}}\)
ⓒ. \(36\ \mathrm{g\,mol^{-1}}\)
ⓓ. \(54\ \mathrm{g\,mol^{-1}}\)
Correct Answer: \(0\ \mathrm{g\,mol^{-1}}\)
Explanation: \(\textbf{Initial constituent mass:}\)
Both polymers contain 12 glucose residues derived from 12 glucose molecules.
Before condensation, the total molar mass of these glucose molecules is:
\[
M_{\mathrm{initial}}=12\times180
\]
\[
M_{\mathrm{initial}}=2160\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Connectivity of P:}\)
P is an unbranched chain containing 12 connected glucose units.
A linear chain of 12 units contains:
\[
N_{\mathrm{bonds,P}}=12-1=11
\]
Each bond formation eliminates one water molecule.
Therefore:
\[
M_P=2160-11(18)
\]
\[
M_P=2160-198
\]
\[
M_P=1962\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Connectivity of Q:}\)
Q is branched, but it is also specified to be connected and acyclic.
Branching changes which glucose hydroxyl positions participate in bonding, but a connected acyclic structure of 12 units still contains 11 connections.
Thus:
\[
N_{\mathrm{bonds,Q}}=12-1=11
\]
\[
M_Q=2160-11(18)
\]
\[
M_Q=1962\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Molar-mass comparison:}\)
\[
\Delta M=M_P-M_Q
\]
\[
\Delta M=1962-1962
\]
\[
\Delta M=0\ \mathrm{g\,mol^{-1}}
\]
\(\textbf{Chemical interpretation:}\)
The different branching patterns can produce different molecular shapes and physical properties without changing the total molecular formula for these specified acyclic structures. The essential invariant is the number of constituent glucose units and the number of condensation reactions. A different molar mass would require a difference in composition or in the number of groups eliminated, neither of which occurs here.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta M=0\ \mathrm{g\,mol^{-1}}}
\]
86. A branched glucose polymer contains 20 glucose residues joined in a connected structure without cyclic glycosidic paths. It contains three alpha-(1→6) branch connections, while every other connection is alpha-(1→4).
A hypothetical reagent cleaves all three alpha-(1→6) connections without cleaving any alpha-(1→4) bond. No other chemical changes occur.
How many separate carbohydrate fragments will result?
ⓐ. 2
ⓑ. 3
ⓒ. 5
ⓓ. 4
Correct Answer: 4
Explanation: \(\textbf{Original polymer connectivity:}\)
The given polymer contains 20 glucose residues connected in one acyclic structure. Its glycosidic connections can therefore be regarded as the bonds joining individual glucose residues into a single branched network.
For a connected acyclic arrangement:
\[
N_{\mathrm{bonds}}=n-1
\]
\[
N_{\mathrm{bonds}}=20-1=19
\]
\(\textbf{Identification of bonds to be cleaved:}\)
Three of these bonds are alpha-(1→6) branch connections. The reagent is specified to cleave all three while leaving the alpha-(1→4) bonds intact.
\(\textbf{Effect of the first cleavage:}\)
Removing one connection from an acyclic connected structure separates it into two components.
\(\textbf{Effect of subsequent cleavages:}\)
Because the original network has no cyclic path, none of the three specified connections can be removed without increasing the number of separate components by one.
Starting with one connected polymer:
\[
N_{\mathrm{fragments}}=1+N_{\mathrm{cleaved\ bonds}}
\]
\[
N_{\mathrm{fragments}}=1+3
\]
\[
N_{\mathrm{fragments}}=4
\]
\(\textbf{Chemical consistency check:}\)
The remaining alpha-(1→4) connections are:
\[
19-3=16
\]
Four separate acyclic fragments containing a total of 20 glucose residues require:
\[
20-4=16
\]
internal glycosidic connections. This agrees with the 16 alpha-(1→4) bonds remaining after selective cleavage.
\(\textbf{Final answer:}\)
\[
\boxed{4\ \text{carbohydrate fragments}}
\]
87. A \(90.0\ \mathrm{g}\) sample of dry starch is assumed to contain \(20\%\) amylose and \(80\%\) amylopectin by mass.
A separation procedure isolates all the amylose without hydrolysing it. The isolated amylose is then completely hydrolysed to glucose.
For this calculation, treat amylose as a long polymer of anhydroglucose units having effective repeat-unit molar mass \(162\ \mathrm{g\,mol^{-1}}\). Glucose has molar mass \(180\ \mathrm{g\,mol^{-1}}\).
What mass of glucose is theoretically obtained from the separated amylose?
ⓐ. \(16.2\ \mathrm{g}\)
ⓑ. \(18.0\ \mathrm{g}\)
ⓒ. \(20.0\ \mathrm{g}\)
ⓓ. \(22.0\ \mathrm{g}\)
Correct Answer: \(20.0\ \mathrm{g}\)
Explanation: \(\textbf{Identification of the isolated component:}\)
Amylose is the unbranched component of starch. The problem specifies that all amylose is isolated without hydrolysis, so only its own mass contributes to the subsequent glucose production.
\(\textbf{Mass of isolated amylose:}\)
The initial starch sample has mass:
\[
m_{\mathrm{starch}}=90.0\ \mathrm{g}
\]
Amylose constitutes \(20\%\) by mass.
Therefore:
\[
m_{\mathrm{amylose}}=\frac{20}{100}\times90.0
\]
\[
m_{\mathrm{amylose}}=18.0\ \mathrm{g}
\]
\(\textbf{Hydrolysis relationship:}\)
Amylose is composed of glucose-derived units. The effective anhydroglucose repeat-unit formula is \(\mathrm{C_6H_{10}O_5}\).
Hydrolysis incorporates water and regenerates glucose:
\[
\mathrm{C_6H_{10}O_5+H_2O\rightarrow C_6H_{12}O_6}
\]
This relation applies per repeat unit under the long-chain approximation stated in the question.
\(\textbf{Glucose yield calculation:}\)
The mass conversion factor is:
\[
\frac{M_{\mathrm{glucose}}}{M_{\mathrm{repeat}}}
=
\frac{180}{162}
\]
Thus:
\[
m_{\mathrm{glucose}}=18.0\times\frac{180}{162}
\]
\[
m_{\mathrm{glucose}}=20.0\ \mathrm{g}
\]
\(\textbf{Physical interpretation:}\)
The mass of glucose exceeds the mass of the original amylose because water is incorporated during hydrolysis. The amylopectin fraction contributes nothing to the stated isolated-amylose yield because it was separated before hydrolysis.
\(\textbf{Final answer:}\)
\[
\boxed{m_{\mathrm{glucose}}=20.0\ \mathrm{g}}
\]
88. The open-chain Fischer projections of D-glucose and D-galactose are compared using the standard convention with the aldehyde group at the top.
For D-glucose, the hydroxyl-group positions at C2, C3, C4 and C5 are right, left, right and right.
For D-galactose, the corresponding positions are right, left, left and right.
Both molecules possess a terminal aldehydic group and a six-carbon chain.
Which statement correctly describes their stereochemical relationship and its relevance to disaccharide composition?
ⓐ. They are C4 epimers; replacement of a glucose residue by galactose changes the constituent identity without changing the aldose classification.
ⓑ. They are anomers; replacement of glucose by galactose changes only the configuration of an existing glycosidic linkage.
ⓒ. They are enantiomers; replacement of glucose by galactose converts a D-series residue into an L-series residue.
ⓓ. They are functional-group isomers; replacement of glucose by galactose introduces ketonic functionality.
Correct Answer: They are C4 epimers; replacement of a glucose residue by galactose changes the constituent identity without changing the aldose classification.
Explanation: \(\textbf{Comparison of carbonyl functionality:}\)
Both D-glucose and D-galactose possess an aldehydic group at C1 in their open-chain structures. Both also contain six carbon atoms. Therefore, both are aldohexoses and possess the same molecular formula, \(\mathrm{C_6H_{12}O_6}\).
\(\textbf{Comparison of configurations:}\)
The supplied Fischer projections show identical hydroxyl-group positions at C2, C3 and C5. The only difference occurs at C4. Consequently, the two molecules differ in configuration at one asymmetric carbon atom and are described as C4 epimers.
\(\textbf{D-series identification:}\)
Both molecules have their hydroxyl group at C5 on the right in the specified Fischer projections. Therefore, both belong to the D-series. The C4 difference does not convert either molecule into an L-series sugar.
\(\textbf{Connection with disaccharides:}\)
Maltose contains two glucose units, while lactose contains one galactose unit and one glucose unit. Thus, the difference between glucose and galactose helps explain the different constituent identities of these reducing disaccharides.
\(\textbf{Important distinction:}\)
Epimerism between free monosaccharides is different from anomerism at a cyclic sugar's anomeric carbon. The difference at C4 does not create ketonic functionality or change either sugar from an aldose into a ketose. This provides a structural basis for understanding how closely related monosaccharides can become constituents of different disaccharides.
89. Two disaccharides P and Q contain one D-glucose residue each.
The second residue of P is D-galactose, whereas the second residue of Q is D-fructose.
Both disaccharides are completely hydrolysed, and the liberated monosaccharides are examined in their open-chain forms.
Which comparison correctly identifies the carbonyl classes of the non-glucose products and their relationship to glucose?
ⓐ. P releases a ketohexose; Q releases an aldohexose; both differ from glucose only at C4.
ⓑ. P releases an aldohexose; Q releases an aldohexose; both are epimers of glucose.
ⓒ. P releases a ketohexose; Q releases a ketohexose; both are functional-group isomers of glucose.
ⓓ. P releases an aldohexose; Q releases a ketohexose; the former is a C4 epimer and the latter a functional-group isomer of glucose.
Correct Answer: P releases an aldohexose; Q releases a ketohexose; the former is a C4 epimer and the latter a functional-group isomer of glucose.
Explanation: \(\textbf{Constituent identity of P:}\)
P contains glucose and galactose residues. Hydrolysis releases free glucose and galactose. Galactose possesses an aldehydic carbonyl group at C1 in its open-chain form, so it belongs to the aldohexose class.
\(\textbf{Relationship between galactose and glucose:}\)
D-galactose and D-glucose have the same molecular formula and carbonyl functionality. Their stereochemical difference occurs at C4, making them C4 epimers rather than functional-group isomers.
\(\textbf{Constituent identity of Q:}\)
Q contains glucose and fructose residues. Hydrolysis releases the corresponding monosaccharides. Fructose contains a ketonic carbonyl group at C2 in its open-chain form, so it is a ketohexose.
\(\textbf{Relationship between fructose and glucose:}\)
Glucose and fructose share the molecular formula \(\mathrm{C_6H_{12}O_6}\) but differ in the nature and position of their carbonyl groups. Glucose is an aldose, whereas fructose is a ketose. They are therefore functional-group isomers.
\(\textbf{Integrated interpretation:}\)
The two disaccharides each contain one glucose residue, but their second residues differ in distinct chemical ways. Galactose represents a stereochemical variation of an aldohexose, while fructose represents a different carbonyl class. Hydrolysis reveals these differences in constituent composition without requiring any conversion of glucose into another monosaccharide.
90. A pure disaccharide X is hydrolysed completely to give equal amounts of two hexoses P and Q.
Both P and Q reduce Fehling's solution under suitable alkaline conditions. However, only P is oxidised directly by bromine water under mild aldehyde-oxidising conditions.
Suppose P is D-glucose and the disaccharide X is one of sucrose, lactose or maltose.
Which identification is consistent with all the observations?
ⓐ. X is lactose, and Q is D-galactose.
ⓑ. X is sucrose, and Q is D-fructose.
ⓒ. X is maltose, and Q is D-glucose.
ⓓ. X is lactose, and Q is D-fructose.
Correct Answer: X is sucrose, and Q is D-fructose.
Explanation: \(\textbf{Interpretation of P:}\)
P is specified as D-glucose, an aldohexose. It reduces Fehling's solution under appropriate conditions and is oxidised by bromine water to gluconic acid. This behaviour is consistent with an accessible aldehydic carbonyl group.
\(\textbf{Interpretation of Q:}\)
Q reduces Fehling's solution but does not undergo the corresponding direct mild bromine-water oxidation. This combination is consistent with a ketose such as D-fructose. Fructose can show reducing behaviour in alkaline solution because it can rearrange through an enediol intermediate to aldose forms.
\(\textbf{Disaccharide composition:}\)
Among sucrose, lactose and maltose, sucrose is the disaccharide that yields glucose and fructose in equimolar amounts on complete hydrolysis. Lactose instead produces glucose and galactose, while maltose produces two glucose molecules.
\(\textbf{Chemical discrimination:}\)
Galactose is itself an aldohexose and would be expected to undergo the corresponding mild aldehyde oxidation. Similarly, a second glucose molecule would exhibit the same relevant aldehydic behaviour as P. Therefore, the bromine-water observation distinguishes fructose from the other proposed hydrolysis constituents.
\(\textbf{Conclusion:}\)
The positive Fehling's tests alone cannot distinguish the two free hexoses because both glucose and fructose are reducing sugars. The additional mild-oxidation observation provides the independent carbonyl-class evidence required to identify Q as fructose and X as sucrose.
91. A student examines a pure aqueous lactose sample before and after complete hydrolysis.
Before hydrolysis, the sample gives a positive Fehling's test. After hydrolysis, the resulting mixture also gives a positive Fehling's test.
Which conclusion best explains why the test result alone cannot establish whether hydrolysis occurred?
ⓐ. Lactose must be non-reducing, but its hydrolysis products are reducing.
ⓑ. Lactose and its hydrolysis products must contain identical glycosidic linkages.
ⓒ. Intact lactose is reducing, and its free monosaccharide products are also reducing.
ⓓ. Lactose hydrolysis converts glucose and galactose into the same monosaccharide.
Correct Answer: Intact lactose is reducing, and its free monosaccharide products are also reducing.
Explanation: Lactose is a reducing disaccharide composed of galactose and glucose units. Its glycosidic bond joins the anomeric carbon C1 of galactose to C4 of glucose. The glucose anomeric centre at C1 remains free and can permit access to an open-chain aldehydic form. Consequently, intact lactose gives a positive Fehling's test. Complete hydrolysis cleaves the galactose–glucose glycosidic linkage and liberates the two constituent monosaccharides. Both galactose and glucose are aldose monosaccharides and exhibit reducing behaviour under suitable conditions. Therefore, the hydrolysate also gives a positive Fehling's test. The persistence of a positive result does not establish that the molecular structure remained unchanged. Hydrolysis transforms one reducing disaccharide molecule into two reducing monosaccharide molecules. A qualitative reducing-sugar test detects the relevant chemical reactivity but does not independently establish the number of carbohydrate molecules or their precise identities. Additional information, such as identifying the hydrolysis products, is required to demonstrate cleavage of the glycosidic bond. The correct interpretation separates evidence of reducing behaviour from evidence of hydrolysis.
92. A pure sample of maltose is hydrolysed completely by maltase. The products are then examined for their molecular composition and optical identity.
Which statement correctly describes the chemical change?
ⓐ. Two glucose molecules are liberated, and no conversion of glucose into fructose is required.
ⓑ. Glucose and fructose are liberated, producing invert sugar through optical inversion.
ⓒ. Glucose and galactose are liberated, and both initially possess free ketonic groups.
ⓓ. Two galactose molecules are liberated, and the alpha-(1→4) linkage becomes beta-(1→4).
Correct Answer: Two glucose molecules are liberated, and no conversion of glucose into fructose is required.
Explanation: Maltose is a disaccharide containing two glucose residues connected through an alpha-(1→4) glycosidic linkage. The enzyme maltase catalyses cleavage of this linkage by hydrolysis. Water participates in the reaction, and the two glucose-derived residues are liberated as glucose molecules. No ketose formation is required because both original constituent units are glucose. Similarly, galactose is not a constituent of maltose and is not produced simply by hydrolysing its glycosidic bond. The term invert sugar is associated with the hydrolysis of sucrose, which produces glucose and fructose and results in a characteristic reversal of the net optical-rotation sign. This terminology does not describe the ordinary hydrolysis of maltose into two glucose molecules. Maltose is itself a reducing sugar because one glucose residue retains a free anomeric centre. Following hydrolysis, both liberated glucose molecules can exhibit reducing behaviour. The hydrolysis therefore changes the degree of molecular association without changing the underlying identity of the monosaccharide constituents. The reaction illustrates the close connection between enzyme specificity, glycosidic connectivity and hydrolysis products.
93. Consider two polymers P and Q that each contain numerous glucose units.
P is an unbranched polymer containing alpha-(1→4) glycosidic linkages.
Q is an unbranched polymer containing beta-(1→4) glycosidic linkages.
Both polymers undergo complete hydrolysis under sufficiently strong conditions and give glucose as the only monosaccharide product.
A student concludes that P and Q must have identical biological roles because their hydrolysis products are identical.
Which response correctly evaluates the student's conclusion?
ⓐ. The conclusion is correct because identical monosaccharide products require identical glycosidic configurations.
ⓑ. The conclusion is correct because hydrolysis removes all evidence of the original polymer structure.
ⓒ. The conclusion is incorrect because P yields an aldose whereas Q yields a ketose on hydrolysis.
ⓓ. The conclusion is incorrect because different glycosidic configurations can produce different polymer properties and biological functions.
Correct Answer: The conclusion is incorrect because different glycosidic configurations can produce different polymer properties and biological functions.
Explanation: Both P and Q are glucose-based polysaccharides, so complete hydrolysis can produce the same monosaccharide, glucose. However, their glycosidic configurations are different. P contains alpha-(1→4) linkages, characteristic of an unbranched starch component such as amylose. Q contains beta-(1→4) linkages, characteristic of cellulose. The alpha and beta designations reflect different stereochemical arrangements at the glucose anomeric carbon participating in linkage formation. These differences influence the three-dimensional organisation and properties of the resulting polymer chains. Amylose is associated with carbohydrate storage in plants, whereas cellulose is a major structural constituent of plant cell walls. Identical hydrolysis products therefore do not imply identical biological functions. The hydrolysis experiment identifies the constituent monosaccharide but does not, by itself, preserve information about the original glycosidic stereochemistry. A structural comparison of the linkages is needed to distinguish these polymers reliably. The student's error is to treat monomer identity as sufficient evidence for complete polymeric identity. The example demonstrates why both constituent composition and molecular connectivity are essential to carbohydrate structure–function relationships.
94. A hypothetical branched glucose polymer contains alpha-(1→4) links along its chains and alpha-(1→6) links at branch positions. A student proposes replacing every alpha-(1→6) branch connection with an alpha-(1→4) connection while preserving the total number of glucose residues and ensuring that the final structure is a single unbranched chain.
Which statement correctly describes the consequences of this structural change?
ⓐ. The polymer acquires fructose residues because C6 can no longer participate in glycosidic bonding.
ⓑ. The constituent monosaccharide remains glucose, but the branching pattern and glycosidic connectivity change.
ⓒ. The polymer changes from an aldose-derived carbohydrate to a ketose-derived carbohydrate.
ⓓ. The total number of glucose units decreases because every former branch point loses one carbon atom.
Correct Answer: The constituent monosaccharide remains glucose, but the branching pattern and glycosidic connectivity change.
Explanation: The hypothetical transformation changes the positions at which glucose residues are joined but explicitly preserves the total number of glucose residues. An alpha-(1→6) glycosidic bond connects the anomeric carbon of one glucose residue to a C6 hydroxyl position of another. An alpha-(1→4) bond instead connects the anomeric carbon to a C4 hydroxyl position. Replacing the specified branch linkages and rearranging connectivity into an unbranched chain changes the polymer's topology. It does not require conversion of glucose into fructose because the chemical identity of the constituent monosaccharide is unchanged. Glucose remains an aldose-derived unit even when incorporated into different glycosidic arrangements. The carbon skeleton of each residue is also retained, so no carbon atom must be lost merely because a different hydroxyl position participates in linkage formation. The final unbranched alpha-(1→4)-linked structure resembles the fundamental chain arrangement of amylose rather than the branched arrangement of amylopectin. Although the monomer composition remains constant, the different connectivity can influence physical properties and biological interactions. This distinguishes a change in polymer architecture from a change in molecular constitution of the monomer itself.
95. A researcher examines three carbohydrate preparations under the following conditions.
| Preparation | Constituent information | Additional observation |
| P | Contains two glucose residues per molecule | Reducing; hydrolysed by maltase |
| Q | Contains glucose and fructose residues | Non-reducing; hydrolysis reverses the sign of optical rotation |
| R | Contains numerous alpha-D-glucose residues | Highly branched; stored in animal tissues |
Which interpretation correctly distinguishes the three preparations and the types of evidence used?
ⓐ. P—Maltose; Q—Sucrose; R—Glycogen, identified through composition, reactivity and structural function.
ⓑ. P—Lactose; Q—Sucrose; R—Amylose, identified through composition, reactivity and structural function.
ⓒ. P—Maltose; Q—Lactose; R—Cellulose, identified through composition, reactivity and structural function.
ⓓ. P—Sucrose; Q—Maltose; R—Amylopectin, identified through composition, reactivity and structural function.
Correct Answer: P—Maltose; Q—Sucrose; R—Glycogen, identified through composition, reactivity and structural function.
Explanation: \(\textbf{Identification of P:}\)
P contains two glucose residues per molecule and is therefore a glucose–glucose disaccharide. Its reducing behaviour and susceptibility to hydrolysis by maltase identify it as maltose. Maltose contains an alpha-(1→4) glycosidic linkage joining two glucose residues, with one anomeric centre remaining free.
\(\textbf{Identification of Q:}\)
Q contains glucose and fructose residues. Sucrose has precisely this constituent composition and is non-reducing because both anomeric centres participate in its glycosidic linkage. On hydrolysis, sucrose produces equimolar glucose and fructose. The greater magnitude of the negative optical rotation of fructose causes the hydrolysate to be laevorotatory, whereas the original sucrose is dextrorotatory. Thus, the change in optical-rotation sign is additional evidence supporting the sucrose identification.
\(\textbf{Identification of R:}\)
R contains numerous alpha-D-glucose residues and has a highly branched structure. Its storage role in animal tissues distinguishes it as glycogen. Glycogen resembles amylopectin structurally but is more highly branched and serves as an important carbohydrate reserve in animals.
\(\textbf{Integration of the evidence:}\)
P and Q are disaccharides, while R is a polysaccharide. The two disaccharides are distinguished through constituent composition, reducing behaviour and chemical hydrolysis. The polysaccharide is identified through its glucose-based constitution, branching and biological storage role. These different observations are complementary and do not require all three carbohydrates to possess the same molecular size or reducing properties. The identification therefore follows from combining structural, chemical and biological evidence rather than relying on one isolated characteristic.
96. The open-chain forms of D-glucose and D-fructose contain different numbers of asymmetric carbon atoms. Each forms its commonly described cyclic structure through intramolecular addition of the C5 hydroxyl group to the carbonyl carbon.
Which option correctly gives the number of asymmetric carbon atoms before and after cyclisation, respectively?
ⓐ. Glucose: 4 → 5; Fructose: 3 → 4
ⓑ. Glucose: 4 → 4; Fructose: 3 → 4
ⓒ. Glucose: 4 → 5; Fructose: 3 → 5
ⓓ. Glucose: 5 → 5; Fructose: 4 → 4
Correct Answer: Glucose: 4 → 5; Fructose: 3 → 4
Explanation: \(\textbf{Asymmetric centres in open-chain glucose:}\)
Glucose is an aldohexose whose open-chain structure contains an aldehydic carbonyl group at C1. Its carbon atoms C2, C3, C4 and C5 each possess four different substituents and are asymmetric. The aldehydic carbon C1 is trigonal planar and is not an asymmetric carbon, while C6 is a terminal –CH₂OH carbon. Therefore, open-chain glucose contains four asymmetric carbon atoms.
\(\textbf{Effect of glucose cyclisation:}\)
Intramolecular addition of the C5 hydroxyl group to C1 converts the planar aldehydic carbon into a tetrahedral hemiacetal carbon. C1 becomes a new asymmetric centre capable of possessing alpha or beta configuration. The original asymmetric centres remain present, so cyclic glucopyranose contains five asymmetric carbon atoms.
\(\textbf{Asymmetric centres in open-chain fructose:}\)
Fructose is a ketohexose containing a ketonic carbonyl group at C2. Its open-chain asymmetric carbon atoms are C3, C4 and C5. C1 and C6 are terminal –CH₂OH carbons, while C2 is originally a planar carbonyl carbon. Hence, open-chain fructose contains three asymmetric carbon atoms.
\(\textbf{Effect of fructose cyclisation:}\)
Addition of the C5 hydroxyl group to C2 creates a cyclic hemiketal and converts C2 into a new asymmetric centre. The resulting fructofuranose structure consequently contains four asymmetric carbon atoms.
\(\textbf{Structural conclusion:}\)
Both cyclisations introduce one new asymmetric centre, but the initial numbers differ because the carbonyl groups occupy different positions. The comparison therefore combines carbonyl classification, stereogenic-centre identification and the consequence of hemiacetal or hemiketal formation.
97. Consider three pairs of stereoisomeric carbohydrates:
Pair P: D-glucose and L-glucose.
Pair Q: D-glucose and D-galactose.
Pair R: Alpha-D-glucopyranose and beta-D-glucopyranose.
All optical rotations are considered under identical experimental conditions, and each compound is examined in pure form.
Which statement is necessarily correct?
ⓐ. P has equal positive rotations, Q has equal negative rotations, and R is optically inactive.
ⓑ. P has equal and opposite rotations; Q and R need not have equal-magnitude rotations.
ⓒ. P has unequal rotations, while Q and R must have equal and opposite rotations.
ⓓ. All three pairs have equal and opposite rotations because each pair contains stereoisomers.
Correct Answer: P has equal and opposite rotations; Q and R need not have equal-magnitude rotations.
Explanation: The relationship between stereochemical configuration and optical rotation depends on the exact kind of stereoisomerism. D-glucose and L-glucose are enantiomers because their configurations are opposite at every corresponding asymmetric carbon. Under identical conditions, a pair of pure enantiomers has optical rotations of equal magnitude and opposite sign. Thus, the statement about Pair P is necessarily correct. D-glucose and D-galactose, however, are C4 epimers. They differ at one asymmetric carbon but are not mirror-image enantiomers. Their optical rotations are not required to have equal magnitudes or opposite signs. Alpha-D-glucopyranose and beta-D-glucopyranose are anomers differing at C1. These are also diastereomers rather than an enantiomeric pair. Their specific rotations can be different without obeying the equal-and-opposite requirement. In fact, the familiar alpha and beta forms of D-glucose are both dextrorotatory under the usual reference conditions, although their rotation values differ. The correct inference therefore requires distinguishing enantiomerism from epimerism and anomerism rather than treating all stereoisomers as optically equivalent.
98. Sucrose and maltose both contain two hexose residues. In their cyclic structures, each free monosaccharide initially possesses five hydroxyl groups, and formation of one glycosidic bond consumes two hydroxyl groups with elimination of one water molecule.
Consider the following statements.
Statement I: Intact sucrose and maltose each possess eight free hydroxyl groups per molecule.
Statement II: Equal numbers of free hydroxyl groups require both disaccharides to have identical reducing behaviour.
Statement III: Both disaccharides can possess eight free hydroxyl groups even though only maltose has a free anomeric hemiacetal centre.
Statement IV: Complete hydrolysis restores the two hydroxyl functionalities involved in forming the glycosidic linkage.
Which statements are correct?
ⓐ. I and II only
ⓑ. II and IV only
ⓒ. I, III and IV only
ⓓ. I, II and III only
Correct Answer: I, III and IV only
Explanation: Statement I is correct because each free cyclic hexose contains five hydroxyl groups. Two such molecules initially possess a total of ten hydroxyl groups. Formation of one glycosidic linkage removes the equivalent of two free hydroxyl functionalities, leaving eight free hydroxyl groups in the disaccharide. Statement II is incorrect because reducing behaviour depends on the position and chemical nature of the remaining free anomeric functionality rather than simply on the total hydroxyl-group count. In sucrose, the glycosidic linkage joins the glucose C1 and fructose C2 anomeric centres. Neither constituent retains the free hemiacetal or hemiketal centre required for ordinary ring opening. Maltose instead possesses an alpha-(1→4) linkage involving the anomeric carbon of only one glucose residue. The second glucose residue retains a free anomeric hemiacetal centre, making maltose reducing. Statement III is therefore correct because the two disaccharides can have identical numbers of free hydroxyl groups but different reducing properties. Statement IV is correct because hydrolysis cleaves the glycosidic linkage through addition of water and regenerates the relevant hydroxyl functionalities in the liberated monosaccharides. The decisive distinction is thus not the total oxygen or hydroxyl count, but the position at which the original anomeric functionality is engaged.
99. A mixture contains only sucrose, lactose and maltose. On complete hydrolysis, the following quantities of monosaccharides are obtained:
Glucose: \(0.38\ \mathrm{mol}\)
Fructose: \(0.06\ \mathrm{mol}\)
Galactose: \(0.04\ \mathrm{mol}\)
No other monosaccharide is formed.
All three disaccharides have molar mass \(342\ \mathrm{g\,mol^{-1}}\).
What percentage by mass of the original mixture was maltose?
ⓐ. \(41.7\%\)
ⓑ. \(50.0\%\)
ⓒ. \(66.7\%\)
ⓓ. \(58.3\%\)
Correct Answer: \(58.3\%\)
Explanation: \(\textbf{Hydrolysis relationships:}\)
Sucrose produces one glucose molecule and one fructose molecule.
Lactose produces one glucose molecule and one galactose molecule.
Maltose produces two glucose molecules.
These three relationships provide independent ways of identifying the original constituent amounts.
\(\textbf{Determining sucrose from fructose:}\)
Only sucrose contributes fructose among the starting disaccharides.
Therefore:
\[
n_{\mathrm{sucrose}}=n_{\mathrm{fructose}}
\]
\[
n_{\mathrm{sucrose}}=0.06\ \mathrm{mol}
\]
\(\textbf{Determining lactose from galactose:}\)
Only lactose contributes galactose.
Consequently:
\[
n_{\mathrm{lactose}}=n_{\mathrm{galactose}}
\]
\[
n_{\mathrm{lactose}}=0.04\ \mathrm{mol}
\]
\(\textbf{Accounting for glucose:}\)
Let \(x\) represent the original number of moles of maltose.
The total glucose produced is:
\[
n_{\mathrm{glucose}}
=
n_{\mathrm{sucrose}}+n_{\mathrm{lactose}}+2x
\]
Substituting:
\[
0.38=0.06+0.04+2x
\]
\[
0.28=2x
\]
\[
x=0.14\ \mathrm{mol}
\]
\(\textbf{Total initial disaccharide amount:}\)
\[
n_{\mathrm{total}}=0.06+0.04+0.14
\]
\[
n_{\mathrm{total}}=0.24\ \mathrm{mol}
\]
Because all three disaccharides have the same molar mass, their mass fractions equal their mole fractions in the original mixture.
\(\textbf{Maltose mass percentage:}\)
\[
\%\mathrm{\ maltose}=\frac{0.14\times342}{0.24\times342}\times100
\]
\[
\%\mathrm{\ maltose}=58.33\%
\]
\(\textbf{Verification:}\)
The calculated quantities reproduce all three observed hydrolysis products. The maltose contribution of \(0.14\ \mathrm{mol}\) gives \(0.28\ \mathrm{mol}\) glucose, while sucrose and lactose together provide the remaining \(0.10\ \mathrm{mol}\) glucose.
\(\textbf{Final answer:}\)
\[
\boxed{58.3\%}
\]
100. A \(0.10\ \mathrm{mol}\) sample of pure sucrose is completely hydrolysed to glucose and fructose. The hydrolysate is then treated with bromine water under mild conditions that selectively oxidise free aldehydic groups without oxidising the ketonic carbonyl of fructose.
Assume that the oxidation proceeds quantitatively and that no alkaline ketose–aldose rearrangement occurs.
Which product composition is expected after oxidation?
ⓐ. \(0.10\ \mathrm{mol}\) gluconic acid and \(0.10\ \mathrm{mol}\) fructose
ⓑ. \(0.10\ \mathrm{mol}\) gluconic acid and \(0.10\ \mathrm{mol}\) glucose
ⓒ. \(0.20\ \mathrm{mol}\) gluconic acid and no remaining fructose
ⓓ. \(0.10\ \mathrm{mol}\) saccharic acid and \(0.10\ \mathrm{mol}\) fructose
Correct Answer: \(0.10\ \mathrm{mol}\) gluconic acid and \(0.10\ \mathrm{mol}\) fructose
Explanation: \(\textbf{Initial hydrolysis:}\)
Sucrose contains one glucose residue and one fructose residue joined through a glycosidic linkage.
Complete hydrolysis produces equimolar glucose and fructose.
\[
\mathrm{Sucrose+H_2O\rightarrow Glucose+Fructose}
\]
Therefore:
\[
n_{\mathrm{glucose}}=0.10\ \mathrm{mol}
\]
\[
n_{\mathrm{fructose}}=0.10\ \mathrm{mol}
\]
\(\textbf{Identifying the oxidisable monosaccharide:}\)
Glucose is an aldohexose. Its open-chain form possesses an aldehydic group at C1, which can be oxidised by bromine water to a carboxylic acid group.
The product is gluconic acid.
\[
\mathrm{Glucose\xrightarrow{Br_2/H_2O}Gluconic\ acid}
\]
\(\textbf{Behaviour of fructose:}\)
Fructose is a ketohexose whose open-chain carbonyl group is ketonic.
The specified mild bromine-water conditions do not produce the corresponding direct aldehyde oxidation of fructose. The problem also rules out alkaline isomerisation, so fructose is not converted into aldose forms through that pathway during this treatment.
\(\textbf{Product mole accounting:}\)
Each mole of glucose gives one mole of gluconic acid.
Hence:
\[
n_{\mathrm{gluconic\ acid}}=0.10\ \mathrm{mol}
\]
The fructose remains:
\[
n_{\mathrm{fructose}}=0.10\ \mathrm{mol}
\]
\(\textbf{Chemical consistency:}\)
Saccharic acid requires oxidation at both terminal positions of glucose under suitable stronger conditions, not the specified mild selective oxidation. The result demonstrates that two monosaccharides liberated from the same disaccharide may respond differently to a selective oxidising reagent despite both showing reducing behaviour under alkaline Fehling's-test conditions.
\(\textbf{Final answer:}\)
\[
\boxed{0.10\ \mathrm{mol\ gluconic\ acid}+0.10\ \mathrm{mol\ fructose}}
\]