501. Two independent protein preparations undergo denaturation.
P is a native globular protein that loses its regular folded structure when heated.
Q is another native globular protein whose folding is disturbed by a substantial change in pH.
In both preparations, the original peptide bonds remain intact.
The denatured samples are then completely hydrolysed into their constituent amino acids.
The amino acids are recovered without chemical decomposition.
Consider the following statements.
Statement I: The heating treatment of P can disturb its secondary and tertiary structures.
Statement II: The pH treatment of Q can change interactions stabilising its native conformation.
Statement III: The later complete hydrolysis destroys peptide connectivity that survived the initial denaturation.
Statement IV: The amino acid compositions recovered after complete hydrolysis must differ from those of the original proteins merely because denaturation occurred.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and III only
Explanation: Statement I is correct because heating can disturb hydrogen bonding and other interactions involved in maintaining native protein structure. Such changes may cause alpha-helical regions to uncoil and globular structures to unfold. Statement II is correct because changing pH can alter the ionisation of suitable amino acid side chains. This may influence electrostatic attractions and other interactions stabilising the native conformation. Both treatments can consequently produce protein denaturation. Statement III is correct because the question explicitly states that peptide bonds survive the initial denaturation. Complete hydrolysis performed afterwards is a different chemical process that cleaves those bonds and releases constituent amino acids. Statement IV is incorrect because denaturation does not necessarily change the identity or number of amino acid residues in a protein. Under the specified conditions, the original amino acid constituents can therefore be recovered after complete hydrolysis. The distinction between denaturation and hydrolysis is essential. Denaturation changes higher-order organisation and can impair biological activity, whereas complete hydrolysis destroys the original peptide connectivity. The correct combination recognises the different structural levels involved in successive treatments.
502. A plant-derived sample contains three carbohydrate fractions P, Q and R.
| Fraction | Observation |
| P | Water-soluble, essentially unbranched glucose polymer with α-(1→4) linkages |
| Q | Water-insoluble, branched glucose polymer containing α-(1→4) and α-(1→6) linkages |
| R | Structural glucose polymer containing β-(1→4) linkages |
An enzyme selectively cleaves α-(1→6) glycosidic linkages without acting on α-(1→4) or β-(1→4) linkages.
Which statement correctly predicts its direct effect on the fractions?
ⓐ. It hydrolyses the main-chain linkages of P but leaves every branch-forming linkage of Q intact.
ⓑ. It selectively cleaves branch-forming linkages in Q while leaving the specified linkages of P and R unchanged.
ⓒ. It hydrolyses R completely because beta linkages are more susceptible to every carbohydrate-hydrolysing enzyme.
ⓓ. It hydrolyses P and R completely but leaves Q intact because branched polymers cannot undergo selective cleavage.
Correct Answer: It selectively cleaves branch-forming linkages in Q while leaving the specified linkages of P and R unchanged.
Explanation: P has the characteristic features of amylose, the essentially unbranched component of starch. It contains α-(1→4) glycosidic linkages but lacks the specified α-(1→6) branch connections. Q resembles amylopectin, which contains α-(1→4) segments and α-(1→6) branch-forming linkages. R resembles cellulose, whose glucose residues are connected through β-(1→4) linkages. The enzyme is explicitly defined by its selectivity for α-(1→6) connections. Therefore, only Q contains the particular glycosidic linkage targeted by the reagent. Cleavage of those connections can modify the branching organisation of Q without necessarily hydrolysing every α-(1→4) segment. P contains no specified linkage susceptible to the treatment. R also lacks α-(1→6) linkages and is therefore not directly affected under the defined conditions. The fact that all three are glucose polymers does not establish identical enzyme susceptibility. Linkage position and anomeric configuration determine which glycosidic bonds are available to a selective enzyme. The conclusion therefore follows from comparing molecular connectivity rather than merely identifying the common glucose constituent.
503. Two ordinary double-stranded DNA fragments have the same overall nucleotide composition.
P contains one particular sequence arrangement.
Q contains a different sequence arrangement formed by exchanging the positions of selected base pairs without changing the total numbers of A–T and G–C pairs.
Both fragments retain ordinary complementarity at every position.
The sugar–phosphate backbones are chemically intact, and both fragments contain the same number of nucleotides.
An analytical method measures only the total numbers of purine and pyrimidine bases.
A second method compares the actual nucleotide sequences.
Which conclusion is correct?
ⓐ. The first method must distinguish P and Q because changing nucleotide order always changes the number of purines.
ⓑ. Q cannot retain ordinary complementary pairing because its base-pair order differs from P.
ⓒ. The first method can give identical results, but the sequence-sensitive method distinguishes their different nucleotide orders.
ⓓ. The fragments must be enantiomers because they contain the same molecular constituents in different orders.
Correct Answer: The first method can give identical results, but the sequence-sensitive method distinguishes their different nucleotide orders.
Explanation: DNA contains two complementary polynucleotide strands joined through interstrand hydrogen bonds. Its primary structure is associated with the ordered sequence of nucleotides along each strand. The total base composition provides only a summary of how many adenine, guanine, cytosine and thymine units are present. In the question, P and Q possess the same overall nucleotide composition and base-pair counts. Therefore, an analytical method that measures only total purine and pyrimidine numbers can report identical values for the two samples. However, changing the order of base pairs can change the primary nucleotide sequences. The second method is designed to detect those positional differences. Ordinary complementarity can remain intact because the exchanged base pairs are transferred as properly paired units. Thus, the change does not necessarily create mismatches or alter the sugar–phosphate backbone. The fragments are not enantiomers merely because their nucleotide sequences differ. The distinction underlies the importance of DNA sequence information in identifying differences that are invisible to simple compositional analysis. The correct conclusion separates chemical composition from ordered molecular structure.
504. A nutrition researcher records the following four observations:
| Case | Observation |
| P | Increased blood clotting time |
| Q | Soft bones and joint pain in an adult |
| R | Bleeding gums associated with scurvy |
| S | Night blindness and xerophthalmia |
The researcher wishes to identify the vitamin associated with each deficiency and classify the vitamins according to solubility.
Which combination is correct?
ⓐ. P—K, Q—D, R—C, S—A; three fat-soluble vitamins and one water-soluble vitamin
ⓑ. P—C, Q—D, R—K, S—A; two fat-soluble vitamins and two water-soluble vitamins
ⓒ. P—K, Q—A, R—C, S—D; three fat-soluble vitamins and one water-soluble vitamin
ⓓ. P—E, Q—D, R—B₁₂, S—A; four fat-soluble vitamins
Correct Answer: P—K, Q—D, R—C, S—A; three fat-soluble vitamins and one water-soluble vitamin
Explanation: Vitamin K plays an important role in normal blood clotting. NCERT associates its deficiency with increased blood clotting time, identifying P. Vitamin D is associated with proper bone development and maintenance. Its deficiency can produce osteomalacia in adults, which involves soft bones and joint pain. Therefore, Q corresponds to vitamin D. Vitamin C deficiency produces scurvy, including bleeding gums, so R corresponds to vitamin C. Vitamin A deficiency is associated with night blindness and xerophthalmia, identifying S. Vitamins A, D, E and K belong to the fat-soluble group. Among the four identified vitamins, A, D and K are therefore fat-soluble. Vitamin C belongs to the water-soluble group. The four deficiency conditions do not arise from a single common chemical function. Their identification requires the specific NCERT associations rather than merely knowing that vitamins are essential dietary substances. The final solubility classification must be applied only after determining the vitamin identities. The result involves three fat-soluble vitamins and one water-soluble vitamin.
505. An ordinary linear peptide P contains one cysteine residue and one methionine residue.
A second identical copy of P is present in the same reaction mixture.
A mild oxidising treatment selectively joins the two free cysteine thiol groups through one interchain disulphide linkage.
The methionine thioether groups remain unchanged.
No peptide bond is hydrolysed or newly formed during the treatment.
A subsequent selective reducing treatment cleaves only the new disulphide linkage.
Which statement correctly describes the molecular changes?
ⓐ. Oxidation creates a methionine thioether cross-link, and reduction must then cleave the peptide backbones.
ⓑ. Oxidation produces two separate cystine molecules but does not connect the peptide chains.
ⓒ. Oxidation joins the intact peptides through cysteine disulphide bonding; selective reduction separates them without peptide cleavage.
ⓓ. Oxidation converts each cysteine thiol to a terminal oxidised sulphur group, so the two peptide chains remain separate.
Correct Answer: Oxidation joins the intact peptides through cysteine disulphide bonding; selective reduction separates them without peptide cleavage.
Explanation: Cysteine possesses a side-chain thiol group that can undergo suitable oxidation to form a disulphide linkage. The two peptide molecules each contain one free cysteine thiol group. The specified reaction therefore joins these groups through an interchain sulphur–sulphur bond. Because the cysteine residues belong to different peptide molecules, formation of the disulphide linkage connects the two intact chains into one covalently associated assembly. The reaction does not create a new peptide bond because it does not involve condensation between an alpha-amino and alpha-carboxyl group. Methionine contains a thioether side chain rather than a free thiol group. Its sulphur atom therefore does not participate in the specifically defined disulphide-forming reaction. The subsequent reducing treatment cleaves the newly formed disulphide bridge. This can separate the two peptide chains again. The problem explicitly excludes peptide-bond cleavage throughout both operations. Consequently, the amino acid sequence of each original chain remains intact. The experiment distinguishes reversible modification of an interchain stabilising bond from hydrolysis of the primary peptide backbone.
506. A double-stranded DNA molecule contains 40 base pairs.
Its total number of interstrand hydrogen bonds is 92.
Each A–T pair contributes two hydrogen bonds, while each G–C pair contributes three.
A hypothetical mutation replaces one A–T pair with one G–C pair while preserving ordinary complementarity.
A second independent mutation then replaces two G–C pairs with two A–T pairs.
No change occurs in the total number of base pairs.
Which pair gives the original number of G–C pairs and the final number of interstrand hydrogen bonds?
ⓐ. 12 G–C pairs originally and 93 hydrogen bonds finally
ⓑ. 12 G–C pairs originally and 91 hydrogen bonds finally
ⓒ. 13 G–C pairs originally and 91 hydrogen bonds finally
ⓓ. 13 G–C pairs originally and 90 hydrogen bonds finally
Correct Answer: 12 G–C pairs originally and 91 hydrogen bonds finally
Explanation: \(\textbf{Base-pair inventory:}\)
Let \(g\) be the number of G–C pairs and \(a\) the number of A–T pairs.
The molecule contains 40 pairs.
\[
a+g=40
\]
\(\textbf{Hydrogen-bond condition:}\)
\[
2a+3g=92
\]
\(\textbf{Solving the original composition:}\)
\[
a=40-g
\]
Substitution gives:
\[
2(40-g)+3g=92
\]
\[
80-2g+3g=92
\]
\[
g=12
\]
Therefore:
\[
a=40-12=28
\]
\(\textbf{First mutation:}\)
One A–T pair is replaced by one G–C pair.
The hydrogen-bond count increases by one.
\[
N_{\mathrm{H,after\ first}}=92+1
\]
\[
N_{\mathrm{H,after\ first}}=93
\]
\(\textbf{Second mutation:}\)
Two G–C pairs are replaced by two A–T pairs.
Each replacement decreases the count by one hydrogen bond.
\[
N_{\mathrm{H,final}}=93-2
\]
\[
N_{\mathrm{H,final}}=91
\]
\(\textbf{Independent base-pair verification:}\)
The final G–C pair count is:
\[
g_{\mathrm{final}}=12+1-2=11
\]
The final A–T pair count is:
\[
a_{\mathrm{final}}=28-1+2=29
\]
Therefore:
\[
N_{\mathrm{H,final}}=2(29)+3(11)
\]
\[
N_{\mathrm{H,final}}=58+33=91
\]
Both methods agree.
\(\textbf{Final answer:}\)
\[
\boxed{12\ \mathrm{G-C\ pairs\ originally};\quad91\ \mathrm{hydrogen\ bonds\ finally}}
\]
507. A biochemical system contains three hormone-related components:
P is a polypeptide hormone involved in lowering elevated blood glucose concentration.
Q is another hormone with a broadly opposing effect on blood glucose.
R is a steroid hormone class associated with regulation of water and salt excretion by the kidneys.
A student argues that all three hormones must have identical chemical structures because they participate in maintaining the body's internal balance.
Which statement correctly identifies the components and evaluates the argument?
ⓐ. P is insulin, Q glucagon and R mineralocorticoids; regulatory roles do not make them chemically identical.
ⓑ. P is glucagon, Q is insulin and R consists of glucocorticoids; all three lower blood glucose.
ⓒ. P is insulin, Q is thyroxine and R consists of sex hormones; all three are polypeptide hormones.
ⓓ. P is maltase, Q is sucrase and R consists of mineralocorticoids; all three act as digestive enzymes.
Correct Answer: P is insulin, Q glucagon and R mineralocorticoids; regulatory roles do not make them chemically identical.
Explanation: Insulin is a polypeptide hormone associated with lowering elevated blood glucose concentration. Therefore, P corresponds to insulin. Glucagon has a broadly opposing effect because it tends to increase blood glucose concentration. Consequently, Q corresponds to glucagon. Mineralocorticoids are steroid hormones produced by the adrenal cortex. They participate in regulation of water and salt excretion by the kidneys, identifying R. These three substances are all involved in chemical coordination of biological activity. However, their specific regulatory functions differ. Insulin and glucagon influence blood glucose in opposing directions. Mineralocorticoids principally regulate a different set of physiological quantities in the stated NCERT discussion. Shared hormonal function therefore does not establish identical chemical structure or identical biological action. Insulin is a polypeptide, while mineralocorticoids are steroids. Enzymes such as maltase and sucrase catalyse chemical reactions and should not be confused with the specified regulatory hormones. The correct conclusion requires combining chemical classification, endocrine function and the direction of physiological regulation.
508. A researcher compares three kinds of information obtained from a purified protein.
| Experiment | Result |
| P | Complete hydrolysis gives the amounts of each constituent amino acid. |
| Q | Selective partial hydrolysis yields ordered peptide fragments whose overlapping sequences can be identified. |
| R | A structural examination reveals how multiple folded polypeptide subunits associate within the native protein. |
Consider the following conclusions.
Statement I: P can establish amino acid composition but cannot, by itself, establish the original sequence.
Statement II: Q can provide information about primary structure that is not retained in the unordered complete hydrolysate.
Statement III: R provides information about quaternary organisation.
Statement IV: The information obtained from P necessarily establishes the native tertiary structure.
Statement V: A difference in quaternary organisation can exist even when total amino acid compositions are identical.
Which statements are correct?
ⓐ. I, II, III and IV only
ⓑ. II, III, IV and V only
ⓒ. I, II, III and V only
ⓓ. I, III, IV and V only
Correct Answer: I, II, III and V only
Explanation: Statement I is correct because complete hydrolysis breaks peptide bonds and releases the constituent amino acids. The resulting mixture can reveal which amino acids were present and in what amounts, but it no longer preserves their ordered connectivity. Statement II is correct because suitable partial-hydrolysis fragments retain local sequence information. Overlapping ordered fragments can consequently provide evidence for the original primary amino acid sequence. Statement III is correct because quaternary structure concerns the spatial arrangement of two or more polypeptide subunits in a protein. Experiment R directly examines that organisation. Statement IV is incorrect because amino acid composition alone does not specify the full native three-dimensional fold. Different residue orders can share the same amino acid composition, and higher-order folding depends on structural relationships not recovered from an unordered hydrolysate. Statement V is correct because proteins with identical total residue compositions can differ in the number, arrangement or association of their constituent chains. Therefore, quaternary organisation cannot be inferred uniquely from total amino acid composition. The three experiments provide complementary information at different levels of structural resolution. Their results should be combined rather than treated as interchangeable measurements of protein structure.
509. An ordinary linear tetrapeptide P contains one glutamine residue, one asparagine residue and two alanine residues.
Glutamine and asparagine each contain one side-chain carboxamide group.
Treatment I selectively hydrolyses both side-chain carboxamide groups, converting glutamine-derived and asparagine-derived residues into glutamic-acid-derived and aspartic-acid-derived residues, respectively.
No peptide bond is broken during Treatment I.
Treatment II subsequently hydrolyses every peptide bond of the modified tetrapeptide.
Under strongly basic conditions, every free carboxyl group is assumed to be deprotonated, while amino groups are neutral.
Neither alanine residue contains an additional ionisable side-chain group.
Which statement correctly gives the number of ammonia molecules released during Treatment I per molecule of P and the total negative charge of the final free amino acid products under the specified strongly basic conditions?
ⓐ. Two ammonia molecules and a total charge of \(-4\)
ⓑ. One ammonia molecule and a total charge of \(-5\)
ⓒ. Three ammonia molecules and a total charge of \(-6\)
ⓓ. Two ammonia molecules and a total charge of \(-6\)
Correct Answer: Two ammonia molecules and a total charge of \(-6\)
Explanation: \(\textbf{Side-chain transformations:}\)
Glutamine contains one side-chain carboxamide group.
Asparagine also contains one side-chain carboxamide group.
The selective hydrolysis converts these groups into carboxyl groups without breaking the peptide backbone.
Each side-chain amide hydrolysis releases one ammonia molecule.
\[
N_{\mathrm{NH_3}}=1+1
\]
\[
N_{\mathrm{NH_3}}=2
\]
\(\textbf{Composition after Treatment I:}\)
The intact modified tetrapeptide contains glutamic-acid-derived, aspartic-acid-derived and two alanine residues.
Its four residues remain connected through three peptide bonds.
The side-chain transformations introduce two additional free carboxyl groups.
\(\textbf{Effect of complete peptide hydrolysis:}\)
Treatment II breaks all three peptide bonds.
The resulting free amino acids are glutamic acid, aspartic acid and two alanine molecules.
Each free amino acid contributes one alpha-carboxyl group.
\[
N_{\alpha\text{-COOH}}=4
\]
Glutamic acid and aspartic acid each contribute one additional side-chain carboxyl group.
\[
N_{\mathrm{side-chain\ COOH}}=2
\]
\(\textbf{Strongly basic charge balance:}\)
All six free carboxyl groups are deprotonated under the specified conditions.
Amino groups are neutral.
\[
N_{\mathrm{COO^-}}=4+2
\]
\[
N_{\mathrm{COO^-}}=6
\]
Each contributes one negative charge.
\[
q_{\mathrm{total}}=-6
\]
\(\textbf{Chemical consistency:}\)
Ammonia liberation occurs during side-chain deamidation, whereas the later peptide hydrolysis regenerates alpha-amino and alpha-carboxyl groups.
These are distinct hydrolysis processes and must be counted separately.
\(\textbf{Final answer:}\)
\[
\boxed{N_{\mathrm{NH_3}}=2;\qquad q_{\mathrm{total}}=-6}
\]
510. Two purified carbohydrates P and Q each contain six carbon atoms.
| Observation | P | Q |
| Open-chain carbonyl position | C1 | C2 |
| Reaction with hydroxylamine | Forms an oxime | Forms an oxime |
| Oxidation with bromine water under suitable mild conditions | Forms a monocarboxylic acid | No corresponding direct oxidation of the ketonic group |
| Reducing behaviour under suitable alkaline conditions | Positive | Positive |
A student concludes that both substances must be aldohexoses because both form oximes and behave as reducing sugars.
Which statement correctly evaluates the conclusion?
ⓐ. The conclusion is correct because ketones cannot form oximes with hydroxylamine.
ⓑ. P is consistent with an aldohexose and Q with a ketohexose; the common reactions do not erase the distinction established by carbonyl position and mild oxidation.
ⓒ. Both must be ketohexoses because every monosaccharide showing reducing behaviour under alkaline conditions has its carbonyl at C2.
ⓓ. P and Q must be identical because oxime formation uniquely establishes the carbonyl position and stereochemical configuration.
Correct Answer: P is consistent with an aldohexose and Q with a ketohexose; the common reactions do not erase the distinction established by carbonyl position and mild oxidation.
Explanation: An aldohexose contains six carbon atoms and an aldehydic group in its open-chain form. A ketohexose contains six carbon atoms and a ketonic group. P has its carbonyl at C1 and is therefore consistent with an aldohexose such as glucose. Q has its carbonyl at C2 and is consistent with a ketohexose such as fructose. Hydroxylamine can react with both suitable aldehydes and ketones to produce oximes. Consequently, oxime formation alone does not determine whether a monosaccharide is an aldose or a ketose. Under the specified mild conditions, bromine water oxidises the aldehydic group of an aldose to a carboxyl group. It does not directly oxidise the corresponding ketonic group of the ketohexose in the same way. However, fructose can also display reducing behaviour under suitable alkaline conditions. This is consistent with transformations that permit a reducing reaction under those conditions. The student's reasoning incorrectly treats a reducing-sugar test as an exclusive test for an initially present aldehydic group. The correct classification requires interpreting carbonyl position, reagent conditions and observed products together.
511. An ordinary globular protein contains a region stabilised by electrostatic attraction between the side chains of lysine and aspartic acid.
The lysine side chain is initially positively charged, while the aspartic acid side chain is negatively charged.
Treatment P replaces the aspartic acid residue with asparagine, preserving the peptide-bond connectivity.
Treatment Q, performed on a separate sample, lowers the pH sufficiently to protonate the original aspartate side-chain carboxylate.
Neither treatment breaks peptide bonds.
The resulting interactions are examined without assuming any additional structural rearrangement.
Which statement correctly compares the treatments?
ⓐ. P replaces an amino acid and alters primary structure; Q changes ionisation without changing residue order.
ⓑ. P and Q both necessarily hydrolyse the protein because asparagine is not an alpha-amino acid.
ⓒ. P preserves the original negative charge because every side-chain amide is a carboxylate, whereas Q increases its negative charge.
ⓓ. Both treatments must introduce an additional peptide bond because neutralisation of a charged side chain requires condensation.
Correct Answer: P replaces an amino acid and alters primary structure; Q changes ionisation without changing residue order.
Explanation: Aspartic acid contains an additional carboxyl group in its side chain. Under the initial conditions, this group is negatively charged and can attract a positively charged lysine side chain. Such electrostatic interactions may contribute to stabilising protein tertiary structure. Asparagine differs from aspartic acid because its corresponding side-chain functional group is a carboxamide. Replacing aspartic acid with asparagine changes the amino acid identity at that position. Therefore, Treatment P changes primary structure even though peptide-bond connectivity remains intact. The asparagine side-chain amide does not carry the original carboxylate negative charge. Treatment Q instead changes the protonation state of the existing aspartic acid side chain. Protonation neutralises the negative charge without replacing the residue. Consequently, Q need not change the primary amino acid sequence. Both treatments can remove the original attraction between oppositely charged side chains. However, they produce different chemical changes and need not have identical effects on overall folding. The conclusion illustrates the distinction between residue substitution and an environmental change in side-chain ionisation.
512. A carbohydrate sample contains two ordinary linear chains, P and Q.
P contains six D-glucose residues joined by five α-(1→4) glycosidic linkages.
Q contains six D-glucose residues joined by five β-(1→4) glycosidic linkages.
Each chain contains one free reducing end.
A selective enzyme cleaves exactly two α-(1→4) linkages in P and no β-(1→4) linkage in Q.
The cleavages occur at two distinct internal positions.
No monosaccharide is degraded.
Which statement correctly compares the products?
ⓐ. P and Q each form three carbohydrate fragments because they have equal molecular formulas.
ⓑ. P produces three carbohydrate fragments while Q remains one chain; the six original glucose residues are conserved in each sample.
ⓒ. P produces two carbohydrate fragments while Q produces three because β-(1→4) linkages hydrolyse spontaneously.
ⓓ. P produces six free glucose molecules while Q remains unchanged because cleavage of any α-(1→4) bond causes complete depolymerisation.
Correct Answer: P produces three carbohydrate fragments while Q remains one chain; the six original glucose residues are conserved in each sample.
Explanation: Both P and Q are glucose-based oligosaccharides with six residues per molecule. However, their glycosidic linkages have different anomeric configurations. P contains α-(1→4) connections, while Q contains β-(1→4) connections. The enzyme is explicitly selective for the alpha linkage. Therefore, it can act on P but not on Q under the stated conditions. P begins as one connected, non-cyclic chain. Cleavage of one internal glycosidic linkage produces two fragments. Cleavage of a second distinct internal linkage produces three fragments. The enzyme is not stated to cleave the remaining three connections, so complete release of all six glucose units is not justified. Q retains its five β-(1→4) linkages and therefore remains one connected chain. Neither treatment changes the total number of glucose-derived residues. This result demonstrates that equal molecular formulas and constituent monosaccharides do not imply identical enzyme susceptibility. The number of fragments must be inferred from actual bond cleavage, while the direction of enzyme selectivity follows from glycosidic configuration.
513. A vitamin mixture contains A, B₁, B₂, B₁₂, C, D, E and K.
The mixture is divided into fat-soluble and water-soluble fractions according to the NCERT classification.
A researcher then examines the water-soluble fraction and identifies the vitamin associated with pernicious anaemia.
A second researcher examines the fat-soluble fraction and identifies the vitamin associated with increased blood clotting time.
Assume that separation causes no chemical change or loss.
Which identification is correct?
ⓐ. The water-soluble fraction contains B₁₂, associated with pernicious anaemia; the fat-soluble fraction contains K, associated with normal blood clotting.
ⓑ. The water-soluble fraction contains vitamin K, associated with pernicious anaemia; the fat-soluble fraction contains vitamin B₁₂.
ⓒ. Both vitamins occur in the fat-soluble fraction because their biological effects concern blood.
ⓓ. Both vitamins occur in the water-soluble fraction because every vitamin required for a blood-related function is water-soluble.
Correct Answer: The water-soluble fraction contains B₁₂, associated with pernicious anaemia; the fat-soluble fraction contains K, associated with normal blood clotting.
Explanation: NCERT classifies vitamins A, D, E and K as fat-soluble. The B-group vitamins and vitamin C belong to the water-soluble category. Therefore, vitamin B₁₂ is present in the water-soluble fraction of the stated mixture. NCERT associates deficiency of B₁₂ with pernicious anaemia. This identifies the vitamin sought by the first researcher. Vitamin K is fat-soluble and occurs in the other fraction. It is associated with normal blood clotting, and its deficiency produces increased blood clotting time. This identifies the substance sought by the second researcher. The two vitamins have distinct chemical classifications despite both being associated with blood-related biological observations. Vitamin B₁₂ is also a recognised exception to the general lack of storage of water-soluble vitamins. That storage qualification does not change its solubility class. The experiment therefore requires separate use of solubility, deficiency association and biological function. Similarity in the general context of a deficiency manifestation does not make two vitamins chemically interchangeable.
514. Three samples contain peptide-related material.
| Sample | Constitution |
| P | An ordinary linear tripeptide containing three glycine residues |
| Q | Three separate free glycine molecules |
| R | A mixture of one glycylglycine molecule and one free glycine molecule |
Each sample contains the same total number of glycine-derived units.
A reagent quantitatively hydrolyses every peptide bond without modifying the liberated amino acids.
Which statement correctly compares the peptide-bond counts before treatment and the products afterwards?
ⓐ. P, Q and R initially contain two peptide bonds each, and all yield glycylglycine.
ⓑ. P initially contains two peptide bonds, Q contains none and R contains one; all can yield three free glycine molecules after complete hydrolysis.
ⓒ. P initially contains three peptide bonds, Q contains none and R contains two; all yield a cyclic tripeptide.
ⓓ. P and R initially contain identical peptide-bond counts because their total glycine contents are equal.
Correct Answer: P initially contains two peptide bonds, Q contains none and R contains one; all can yield three free glycine molecules after complete hydrolysis.
Explanation: A linear tripeptide containing three amino acid residues has two peptide bonds. Therefore, triglycine P contains two peptide linkages. Q consists of three independent free glycine molecules. No peptide bond joins them, so its initial peptide-bond count is zero. R contains one glycylglycine molecule, which has one peptide bond, together with one free glycine molecule. Consequently, R initially contains one peptide bond. All three samples nevertheless contain three glycine-derived units in total. Complete peptide hydrolysis of P breaks its two peptide bonds and releases three glycine molecules. Complete hydrolysis of R breaks its one peptide bond and also produces three free glycine molecules. Q already contains three free glycine molecules and is therefore unchanged with respect to peptide connectivity. The final constituent compositions can consequently be identical. This does not imply that the starting molecular organisations were identical. The question distinguishes total residue composition, the number of covalent peptide connections and the outcome of complete hydrolysis.
515. Two ordinary glucose-containing disaccharides P and Q are examined.
P is maltose, containing two D-glucose units joined through an α-(1→4) glycosidic linkage.
Q is lactose, containing β-D-galactose joined to D-glucose through a β-(1→4) glycosidic linkage.
Each disaccharide retains one free anomeric hemiacetal centre.
A reagent selectively converts free anomeric hemiacetal centres into stable glycosides without hydrolysing existing inter-residue linkages.
Both modified products are then subjected to complete acid hydrolysis, which regenerates the original free constituent monosaccharides.
Which statement correctly describes their behaviour?
ⓐ. Both become permanently glucose-only disaccharides because anomeric blocking changes galactose into glucose.
ⓑ. Blocking the free anomeric centres can remove reducing behaviour; hydrolysis yields glucose from P and glucose plus galactose from Q.
ⓒ. P becomes non-reducing, but Q remains reducing because the galactose residue is a ketose.
ⓓ. Neither can be blocked because their reducing ends are already involved in the original glycosidic linkages.
Correct Answer: Blocking the free anomeric centres can remove reducing behaviour; hydrolysis yields glucose from P and glucose plus galactose from Q.
Explanation: Maltose and lactose are both reducing disaccharides under ordinary conditions. Each contains one free anomeric hemiacetal centre capable of participating in ring–chain interconversion. The specified reagent converts these centres into stable glycosidic forms. Therefore, the ordinary reducing functionality can be blocked in both disaccharides. This modification does not alter the identity of the constituent monosaccharides. Maltose consists of two glucose units connected through an α-(1→4) glycosidic linkage. Its complete hydrolysis produces two glucose molecules. Lactose instead contains galactose and glucose connected through a β-(1→4) glycosidic linkage. Its complete hydrolysis produces one galactose and one glucose molecule. The final acid hydrolysis is explicitly stated to regenerate the original free monosaccharides. Therefore, the initial anomeric blocking does not prevent identification of the constituent sugar types after complete hydrolysis. Galactose is an aldose, not a ketose. The comparison requires distinguishing reducing-end availability from glycosidic linkage configuration and constituent monosaccharide identity.
516. A protein contains three cysteine residues at positions 5, 12 and 19 of a single polypeptide chain.
The native protein contains exactly one intrachain disulphide linkage, joining the cysteine residues at positions 5 and 19.
The cysteine residue at position 12 retains a free thiol group.
Treatment I selectively converts every free thiol group into a stable derivative without breaking any disulphide linkage.
Treatment II subsequently reduces the existing disulphide linkage, but does not reverse the derivative formed during Treatment I.
No peptide bond is cleaved.
Which statement correctly describes the available thiol groups after Treatment II?
ⓐ. All three cysteine residues possess free thiol groups because disulphide reduction reverses every earlier side-chain reaction.
ⓑ. Only the cysteine at position 12 possesses a free thiol group because the disulphide linkage remains intact.
ⓒ. The cysteine residues at positions 5 and 19 possess free thiol groups, while the position-12 thiol remains blocked.
ⓓ. None possesses a free thiol group because reduction removes sulphur from every cysteine residue.
Correct Answer: The cysteine residues at positions 5 and 19 possess free thiol groups, while the position-12 thiol remains blocked.
Explanation: Cysteine contains a thiol group in its side chain. Two cysteine thiol groups can be oxidised to form a disulphide linkage. In the native protein, the cysteines at positions 5 and 19 participate in such a bond. Their sulphur atoms are therefore not present as free thiol groups. The cysteine at position 12 remains unlinked and possesses one free –SH group initially. Treatment I selectively modifies this free thiol. It does not disturb the existing disulphide bond, so the position-5 and position-19 cysteines remain connected at that stage. Treatment II subsequently reduces the disulphide linkage. Reduction regenerates the thiol functionalities on the cysteines at positions 5 and 19. However, the problem states that the derivative at position 12 is not reversed. Therefore, the position-12 thiol remains blocked. No peptide-bond cleavage occurs, so the amino acid sequence is preserved. The question distinguishes thiol protection from disulphide reduction and illustrates why the order of selective reactions matters.
517. Three different proteins P, Q and R are compared.
P consists of one long polypeptide chain arranged into a compact native globular structure.
Q consists of two folded polypeptide chains associated non-covalently.
R consists of four folded polypeptide chains associated into a functional assembly.
All three contain alpha-helical and beta-pleated-sheet regions, and all are assumed to possess native biological activity.
Which statement is correct?
ⓐ. All three necessarily possess quaternary structure because each contains secondary-structure elements.
ⓑ. P can have primary, secondary and tertiary structure without quaternary structure; Q and R additionally possess quaternary organisation.
ⓒ. Only R possesses primary structure because it contains more than two polypeptide chains.
ⓓ. Q and R lack tertiary structure because quaternary association replaces intrachain folding.
Correct Answer: P can have primary, secondary and tertiary structure without quaternary structure; Q and R additionally possess quaternary organisation.
Explanation: Primary structure describes the amino acid sequence of an individual polypeptide chain. Secondary structure includes regular arrangements such as alpha-helices and beta-pleated sheets. Tertiary structure concerns the overall folding of a polypeptide chain into its three-dimensional conformation. A protein containing only one polypeptide chain can exhibit all three levels. P therefore does not require quaternary structure merely because its single chain is folded. Quaternary structure refers to the association and relative arrangement of two or more polypeptide subunits. Q contains two associated chains and consequently possesses quaternary organisation. R contains four associated chains and likewise possesses quaternary organisation. The presence of quaternary structure does not eliminate the primary, secondary or tertiary structures of the individual subunits. Each folded subunit retains its own amino acid sequence and internal structural features. The correct classification therefore depends on the number and arrangement of separate polypeptide chains rather than simply on molecular size or the presence of alpha-helices.
518. A researcher examines two hypothetical pathways for hydrolysis of a disaccharide.
The vertical axis represents potential energy, and the horizontal axis represents reaction progress.
Both pathways begin at the same reactant energy and end at a product energy 18 kJ mol⁻¹ below the reactant level.
Pathway P has a transition-state maximum 54 kJ mol⁻¹ above the reactants.
Pathway Q, catalysed by an enzyme, has a transition-state maximum 30 kJ mol⁻¹ above the reactants.
The final chemical products are identical in both pathways.
Which statement correctly compares the forward activation energies and the overall energy change?
ⓐ. The enzyme lowers the forward activation energy by \(24\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change remains \(-18\ \mathrm{kJ\,mol^{-1}}\).
ⓑ. The enzyme makes the reaction energy change \(+6\ \mathrm{kJ\,mol^{-1}}\) because the activation-energy difference must be added to the products.
ⓒ. The enzyme lowers the activation energy by \(18\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change becomes \(-24\ \mathrm{kJ\,mol^{-1}}\).
ⓓ. The enzyme makes the product energy equal to the reactant energy because catalysts cannot act on exothermic reactions.
Correct Answer: The enzyme lowers the forward activation energy by \(24\ \mathrm{kJ\,mol^{-1}}\), while the reaction energy change remains \(-18\ \mathrm{kJ\,mol^{-1}}\).
Explanation: \(\textbf{Forward activation energy of P:}\)
The transition-state maximum lies \(54\ \mathrm{kJ\,mol^{-1}}\) above the reactants.
\[
E_{a,P}=54\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Forward activation energy of Q:}\)
The enzyme-catalysed pathway has its maximum \(30\ \mathrm{kJ\,mol^{-1}}\) above the reactants.
\[
E_{a,Q}=30\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Reduction in activation energy:}\)
\[
\Delta E_a=E_{a,P}-E_{a,Q}
\]
Substituting:
\[
\Delta E_a=54-30
\]
\[
\Delta E_a=24\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Overall reaction energy change:}\)
Both pathways have identical reactant and product energy levels.
The product energy is stated to be \(18\ \mathrm{kJ\,mol^{-1}}\) lower than the reactant energy.
Therefore:
\[
\Delta E=E_{\mathrm{products}}-E_{\mathrm{reactants}}
\]
\[
\Delta E=-18\ \mathrm{kJ\,mol^{-1}}
\]
\(\textbf{Chemical interpretation:}\)
An enzyme provides a pathway with a lower activation-energy barrier.
It does not change the identity or energy levels of the initial and final chemical states under the same conditions.
Consequently, the reaction remains exothermic by the same stated energy difference.
The catalytic change in activation energy must not be confused with the overall energy change of reaction.
\(\textbf{Final answer:}\)
\[
\boxed{\Delta E_a=24\ \mathrm{kJ\,mol^{-1}};\qquad\Delta E=-18\ \mathrm{kJ\,mol^{-1}}}
\]
519. An ordinary DNA fragment is represented by the sequence of one strand:
The sequence is 5′-ATGCCGTA-3′.
Its complementary strand is antiparallel.
A selective modification converts the adenine at position 1 of the displayed strand into guanine.
To restore ordinary complementary pairing at that position, the corresponding base of the opposite strand is also changed appropriately.
All other positions remain unchanged.
Which conclusion correctly describes the changed pair and its effect on the total number of interstrand hydrogen bonds?
ⓐ. The original A–T pair becomes G–C, increasing the total hydrogen-bond count by one.
ⓑ. The original A–T pair becomes G–C, decreasing the hydrogen-bond count by one.
ⓒ. The original G–C pair becomes A–T, increasing the hydrogen-bond count by one.
ⓓ. The original A–T pair becomes G–U, leaving the hydrogen-bond count unchanged.
Correct Answer: The original A–T pair becomes G–C, increasing the total hydrogen-bond count by one.
Explanation: Ordinary DNA contains adenine, guanine, cytosine and thymine as its principal nitrogenous bases. Adenine pairs with thymine through two hydrogen bonds, whereas guanine pairs with cytosine through three. The displayed strand begins with adenine at position 1. Its original complementary partner at that position must therefore be thymine. The specified modification changes adenine into guanine. To restore ordinary complementarity, the opposite base must be changed from thymine to cytosine. Thus, the original A–T pair becomes a G–C pair. This replacement changes the local number of hydrogen bonds from two to three. The total number of interstrand hydrogen bonds therefore increases by one. No other base pair changes, so no additional contribution must be considered. Uracil is characteristic of RNA rather than ordinary DNA and is not produced by the stipulated complementary replacement. The inference combines base identity, complementarity and the difference between the hydrogen-bond counts of the two standard DNA base pairs.
520. A carbohydrate fraction contains an unknown reducing disaccharide P.
Complete hydrolysis of P produces equal molar amounts of D-glucose and D-galactose.
Structural analysis establishes that the anomeric centre of the galactose residue is involved in the glycosidic linkage, while the glucose anomeric centre remains free.
The glycosidic linkage is β-(1→4).
A student argues that the observed reducing behaviour must arise from the galactose unit because galactose forms the glycosidic bond.
Which identification and explanation are correct?
ⓐ. P is sucrose, and the galactose anomeric centre is its reducing end.
ⓑ. P is maltose, and both glucose residues possess free anomeric centres.
ⓒ. P is lactose; its glucose unit has the free anomeric centre responsible for reducing behaviour.
ⓓ. P is cellulose, and its reducing character arises from every beta linkage.
Correct Answer: P is lactose; its glucose unit has the free anomeric centre responsible for reducing behaviour.
Explanation: Lactose is a disaccharide composed of D-galactose and D-glucose. NCERT describes its glycosidic linkage as β-(1→4). This means that the anomeric C1 of the galactose unit is connected to C4 of the glucose unit. The galactose anomeric centre is therefore involved in the glycosidic bond and is not available as a free hemiacetal group. However, the glucose residue retains a free anomeric centre. This centre can participate in ring–chain interconversion and give access to the corresponding carbonyl-containing form. Consequently, lactose behaves as a reducing sugar. The student's explanation incorrectly assigns the reducing behaviour to the glycosidically blocked galactose centre. Sucrose contains glucose and fructose, not glucose and galactose. Maltose contains two glucose units linked through an α-(1→4) bond. Cellulose is a glucose polysaccharide rather than the specified disaccharide. The correct identification requires combining monosaccharide composition, glycosidic configuration and the location of the free anomeric centre.