301. A rigid plane coil has \(20\) turns, area \(0.010\,\text{m}^2\) per turn, and carries current \(2.0\,\text{A}\). Its magnetic moment initially points along positive \(z\).
The coil is placed in a uniform field
\[
\vec B=(0.30\hat i+0.40\hat j)\,\text{T}
\]
Two separate trials start from this same initial orientation.
In Trial P, the coil is constrained to rotate only about the fixed \(x\)-axis. In Trial Q, it is constrained to rotate only about the fixed \(y\)-axis. The coil has moment of inertia \(0.020\,\text{kg m}^2\) about either axis. The ideal bearings exert no torque about their respective axes.
What are the signed initial angular accelerations about the permitted axes in the two trials?
ⓐ. Trial P: \(+8.0\,\text{rad s}^{-2}\); Trial Q: \(-6.0\,\text{rad s}^{-2}\).
ⓑ. Trial P: \(-6.0\,\text{rad s}^{-2}\); Trial Q: \(+8.0\,\text{rad s}^{-2}\).
ⓒ. Trial P: \(-8.0\,\text{rad s}^{-2}\); Trial Q: \(-6.0\,\text{rad s}^{-2}\).
ⓓ. Trial P: \(-8.0\,\text{rad s}^{-2}\); Trial Q: \(+6.0\,\text{rad s}^{-2}\).
Correct Answer: Trial P: \(-8.0\,\text{rad s}^{-2}\); Trial Q: \(+6.0\,\text{rad s}^{-2}\).
Explanation: \(\textbf{Determine the coil's initial magnetic moment:}\)
The moment magnitude is
\[
m=NIA
\]
Substituting,
\[
m=(20)(2.0)(0.010)
\]
\[
m=0.40\,\text{A m}^2
\]
Its direction is positive \(z\):
\[
\vec m=0.40\hat k\,\text{A m}^2
\]
\(\textbf{Calculate the complete magnetic-torque vector:}\)
\[
\vec\tau=\vec m\times\vec B
\]
\[
\vec\tau=(0.40\hat k)\times(0.30\hat i+0.40\hat j)
\]
Using
\[
\hat k\times\hat i=\hat j,\qquad
\hat k\times\hat j=-\hat i
\]
we obtain
\[
\vec\tau=0.12\hat j-0.16\hat i
\]
\[
\vec\tau=(-0.16\hat i+0.12\hat j)\,\text{N m}
\]
\(\textbf{Trial P — rotation permitted only about }x\textbf{:}\)
Only the torque component parallel to the permitted rotation axis causes angular acceleration about that axis.
Thus,
\[
\tau_x=-0.16\,\text{N m}
\]
Using the rotational equation,
\[
\tau_x=J_x\alpha_x
\]
\[
\alpha_x=\frac{-0.16}{0.020}
\]
\[
\alpha_x=-8.0\,\text{rad s}^{-2}
\]
The bearing supplies the reactions needed to prevent rotations about the other axes.
\(\textbf{Trial Q — rotation permitted only about }y\textbf{:}\)
The relevant torque component is
\[
\tau_y=+0.12\,\text{N m}
\]
Therefore,
\[
\alpha_y=\frac{\tau_y}{J_y}
\]
\[
\alpha_y=\frac{+0.12}{0.020}
\]
\[
\alpha_y=+6.0\,\text{rad s}^{-2}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\alpha_x=-8.0\,\text{rad s}^{-2},\qquad
\alpha_y=+6.0\,\text{rad s}^{-2}}
\]
The magnetic field produces the same complete torque vector in both initial configurations.
However, the mechanical constraints differ.
Only the component of torque about the permitted axis causes the corresponding angular acceleration.
Using the complete torque magnitude in either trial would therefore be incorrect.
The comparison connects magnetic torque with constrained rotational dynamics.
302. A plane current loop has a constant magnetic-moment magnitude \(1.0\,\text{A m}^2\). It rotates about the \(z\)-axis in a uniform magnetic field
\[
\vec B=0.60\hat i\,\text{T}
\]
At the instant under consideration, its magnetic moment lies in the \(xy\)-plane, making an angle of \(60^\circ\) from positive \(x\) towards positive \(y\).
An external motor maintains an instantaneous angular velocity
\[
\vec\omega=+2.0\hat k\,\text{rad s}^{-1}
\]
The magnetic torque is the only torque apart from that supplied by the motor.
What are the magnetic-torque vector and the instantaneous mechanical power delivered by the magnetic field to the loop?
ⓐ. \(\vec\tau=+0.30\sqrt3\hat k\,\text{N m}\); power \(+0.60\sqrt3\,\text{W}\).
ⓑ. \(\vec\tau=-0.30\sqrt3\hat k\,\text{N m}\); power \(+0.60\sqrt3\,\text{W}\).
ⓒ. \(\vec\tau=-0.30\sqrt3\hat k\,\text{N m}\); power \(-0.60\sqrt3\,\text{W}\).
ⓓ. \(\vec\tau=-0.30\hat k\,\text{N m}\); power \(-0.60\,\text{W}\).
Correct Answer: \(\vec\tau=-0.30\sqrt3\hat k\,\text{N m}\); power \(-0.60\sqrt3\,\text{W}\).
Explanation: \(\textbf{Resolve the magnetic-moment direction:}\)
The moment magnitude is
\[
m=1.0\,\text{A m}^2
\]
Its direction makes an angle of \(60^\circ\) with positive \(x\).
Therefore,
\[
\vec m=m(\cos60^\circ\hat i+\sin60^\circ\hat j)
\]
\[
\vec m=\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)\,\text{A m}^2
\]
\(\textbf{Determine the magnetic torque:}\)
\[
\vec\tau=\vec m\times\vec B
\]
Substituting,
\[
\vec\tau=
\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)\times0.60\hat i
\]
The parallel component gives zero.
The remaining term is
\[
\vec\tau=(0.60)\frac{\sqrt3}{2}(\hat j\times\hat i)
\]
Since
\[
\hat j\times\hat i=-\hat k
\]
we obtain
\[
\vec\tau=-0.30\sqrt3\hat k\,\text{N m}
\]
\(\textbf{Determine instantaneous rotational power:}\)
The instantaneous mechanical power delivered by a torque is
\[
P=\vec\tau\cdot\vec\omega
\]
The angular velocity is
\[
\vec\omega=+2.0\hat k\,\text{rad s}^{-1}
\]
Therefore,
\[
P=(-0.30\sqrt3\hat k)\cdot(2.0\hat k)
\]
\[
P=-0.60\sqrt3\,\text{W}
\]
\(\textbf{Interpret the sign of power:}\)
The magnetic torque acts along negative \(z\), while the imposed angular velocity points along positive \(z\).
The two vectors oppose each other.
Thus, the magnetic field performs negative mechanical work at this instant.
To maintain the imposed motion without angular acceleration, the motor must supply an opposing positive torque and positive mechanical power.
\(\textbf{Final answer:}\)
\[
\boxed{\vec\tau=-0.30\sqrt3\hat k\,\text{N m},\qquad
P_B=-0.60\sqrt3\,\text{W}}
\]
The magnitude of a torque does not determine whether it supplies or removes mechanical energy.
The sign of its power depends on the torque–angular-velocity scalar product.
Here, the loop rotates away from the field direction, so the magnetic torque opposes its motion.
The motor maintains that rotation against the magnetic torque.
303. A moving-coil galvanometer contains a light rectangular coil suspended between specially shaped magnetic pole pieces. A soft iron cylinder is placed inside the coil, and a spring provides a restoring torque proportional to angular deflection.
Consider the following statements.
Statement I: The radial magnetic field keeps the magnetic field perpendicular to the coil's magnetic-moment vector throughout its permitted rotation.
Statement II: With a radial field and a linear restoring spring, the equilibrium angular deflection is directly proportional to current.
Statement III: For an ordinary uniform magnetic field, the magnetic-torque magnitude necessarily remains equal to \(NIAB\) at every orientation of a rotating coil.
Statement IV: Increasing the torsional restoring constant while keeping the field, coil geometry and current unchanged reduces the equilibrium deflection.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and IV only
Explanation: The magnetic torque on a plane current coil is
\[
\tau=NIAB\sin\theta
\]
Here, \(\theta\) is the angle between the coil's magnetic moment and the magnetic field.
In a moving-coil galvanometer, the shaped pole pieces and soft iron cylinder help produce a strong radial magnetic field.
The field is arranged to remain in the plane of the moving coil as it rotates.
Consequently, the magnetic moment remains perpendicular to the field.
The angle in the torque expression is therefore \(90^\circ\).
Statement I is correct.
The magnetic torque becomes
\[
\tau_B=NIAB
\]
The restoring spring exerts an opposing torque of magnitude
\[
\tau_r=C\phi
\]
where \(C\) is the torsional constant and \(\phi\) is the angular deflection.
At equilibrium,
\[
NIAB=C\phi
\]
Therefore,
\[
\phi=\frac{NAB}{C}I
\]
The deflection is proportional to current, making Statement II correct.
In an ordinary uniform field, the angle between the moment and the field changes as the coil rotates.
The sine factor generally changes, so the magnetic torque is not necessarily \(NIAB\) at every orientation.
Statement III is incorrect.
At fixed current and magnetic parameters, increasing \(C\) decreases the equilibrium deflection.
Statement IV is correct.
The radial field is important because it removes the changing-angle factor from the torque during galvanometer operation.
The restoring spring then converts the electromagnetic torque into a reproducible angular reading.
304. A moving-coil galvanometer has \(100\) turns, coil area \(2.0\times10^{-4}\,\text{m}^2\), and a uniform radial magnetic field of magnitude \(0.50\,\text{T}\). A steady current of \(20\,\mu\text{A}\) produces an equilibrium angular deflection of \(0.20\,\text{rad}\).
The same galvanometer is then placed in a radial field whose magnitude is \(25\%\) greater. Its restoring spring and coil geometry remain unchanged.
What are its torsional constant and its equilibrium deflection when the current is increased to \(30\,\mu\text{A}\)?
ⓐ. \(C=1.0\times10^{-6}\,\text{N m rad}^{-1}\); deflection \(0.30\,\text{rad}\).
ⓑ. \(C=2.0\times10^{-6}\,\text{N m rad}^{-1}\); deflection \(0.375\,\text{rad}\).
ⓒ. \(C=1.0\times10^{-6}\,\text{N m rad}^{-1}\); deflection \(0.250\,\text{rad}\).
ⓓ. \(C=1.0\times10^{-6}\,\text{N m rad}^{-1}\); deflection \(0.375\,\text{rad}\).
Correct Answer: \(C=1.0\times10^{-6}\,\text{N m rad}^{-1}\); deflection \(0.375\,\text{rad}\).
Explanation: \(\textbf{Use the radial-field torque balance:}\)
The magnetic torque is
\[
\tau_B=NIAB
\]
At equilibrium, it balances the restoring torque:
\[
NIAB=C\phi
\]
Therefore,
\[
C=\frac{NIAB}{\phi}
\]
\(\textbf{Calculate the original magnetic torque:}\)
The given current is
\[
I_1=20\,\mu\text{A}=20\times10^{-6}\,\text{A}
\]
Substitute the original values:
\[
\tau_{B1}=(100)(20\times10^{-6})(2.0\times10^{-4})(0.50)
\]
\[
\tau_{B1}=2.0\times10^{-7}\,\text{N m}
\]
\(\textbf{Determine the torsional constant:}\)
The measured deflection is
\[
\phi_1=0.20\,\text{rad}
\]
Thus,
\[
C=\frac{2.0\times10^{-7}}{0.20}
\]
\[
C=1.0\times10^{-6}\,\text{N m rad}^{-1}
\]
\(\textbf{Apply the changed field and current:}\)
The new magnetic field is
\[
B_2=1.25B_1
\]
\[
B_2=(1.25)(0.50)
\]
\[
B_2=0.625\,\text{T}
\]
The new current is
\[
I_2=30\times10^{-6}\,\text{A}
\]
\(\textbf{Calculate the new equilibrium deflection:}\)
\[
\phi_2=\frac{NI_2AB_2}{C}
\]
Substituting,
\[
\phi_2=
\frac{(100)(30\times10^{-6})(2.0\times10^{-4})(0.625)}
{1.0\times10^{-6}}
\]
\[
\phi_2=0.375\,\text{rad}
\]
\(\textbf{Check using proportionality:}\)
At unchanged \(N\), \(A\), and \(C\),
\[
\frac{\phi_2}{\phi_1}
=\frac{I_2}{I_1}\frac{B_2}{B_1}
\]
\[
\frac{\phi_2}{\phi_1}
=\frac{30}{20}(1.25)
\]
\[
\frac{\phi_2}{\phi_1}=1.875
\]
\[
\phi_2=(0.20)(1.875)=0.375\,\text{rad}
\]
\(\textbf{Final answer:}\)
\[
\boxed{C=1.0\times10^{-6}\,\text{N m rad}^{-1},\qquad
\phi_2=0.375\,\text{rad}}
\]
The first reading determines the mechanical restoring constant from electromagnetic torque balance.
The second reading combines two independent changes: current and magnetic-field magnitude.
The radial-field design keeps the torque proportional to current over the permitted deflection range.
The restoring constant remains unchanged, so the new deflection follows directly from the changed magnetic torque.
305. Two moving-coil galvanometers, \(G_1\) and \(G_2\), have identical coil areas, radial magnetic fields and torsional restoring constants. The second instrument has twice as many turns as the first.
The additional turns are made from the same type and cross-sectional area of wire, with the same mean length per turn. Thus, the resistance of the moving coil in \(G_2\) is twice that in \(G_1\).
The instruments are tested in two independent ways.
Test P: Equal currents are maintained through their moving coils.
Test Q: Each moving coil is connected separately across the same sufficiently small ideal constant voltage, with connecting-lead resistance negligible.
Which statement is correct?
ⓐ. \(G_2\) has twice the deflection of \(G_1\) in Test P, but both have equal deflections in Test Q.
ⓑ. Both instruments have equal deflections in Test P, but \(G_2\) has twice the deflection in Test Q.
ⓒ. \(G_2\) has twice the deflection in both tests.
ⓓ. Both instruments have equal deflections in both tests.
Correct Answer: \(G_2\) has twice the deflection of \(G_1\) in Test P, but both have equal deflections in Test Q.
Explanation: For a moving-coil galvanometer in a radial magnetic field, equilibrium requires
\[
NIAB=C\phi
\]
Therefore,
\[
\phi=\frac{NAB}{C}I
\]
The quantities \(A\), \(B\) and \(C\) are identical for the two instruments.
In Test P, equal currents pass through both moving coils.
The deflection is then directly proportional to turn number.
Since \(G_2\) has twice as many turns, it develops twice the magnetic torque at the same current.
Its equilibrium deflection is therefore twice that of \(G_1\).
In Test Q, the applied voltage is the same across the two moving coils.
Let the resistance of \(G_1\) be \(R\).
The resistance of \(G_2\) is \(2R\).
By Ohm's law,
\[
I_1=\frac VR,\qquad I_2=\frac{V}{2R}
\]
Thus, \(G_2\) carries half the current of \(G_1\) in this test.
Its number of turns is twice as large.
The products controlling their magnetic torques are
\[
N_1I_1
\]
and
\[
N_2I_2=(2N_1)\frac{I_1}{2}=N_1I_1
\]
Therefore, the two deflections are equal under the same applied voltage.
Increasing the number of turns improves current sensitivity under the stated conditions.
However, the associated increase in coil resistance compensates for that advantage when the instruments are operated at the same voltage.
The distinction between equal-current and equal-voltage tests is essential.
306. A moving-coil instrument has a linear torsional restoring spring of constant \(C\), an \(N\)-turn coil of area \(A\), and an external magnetic field of magnitude \(B\).
Unlike a properly designed radial-field galvanometer, this instrument uses an ordinary uniform magnetic field. At zero deflection, the magnetic moment of its coil is perpendicular to the field. As the coil deflects by an angle \(\phi\), the angle between its magnetic moment and the field becomes \(90^\circ-\phi\).
The instrument is operated at successive equilibrium deflections of \(30^\circ\) and \(60^\circ\), with respective currents \(I_{30}\) and \(I_{60}\). Assume the coil remains within its mechanical range.
What is \(I_{60}/I_{30}\), and how would this ratio differ for an otherwise identical instrument with a properly radial magnetic field?
ⓐ. Ordinary field: \(2\); radial field: \(2\sqrt3\).
ⓑ. Ordinary field: \(\sqrt3\); radial field: \(2\).
ⓒ. Ordinary field: \(2\sqrt3\); radial field: \(2\).
ⓓ. Ordinary field: \(4\); radial field: \(2\).
Correct Answer: Ordinary field: \(2\sqrt3\); radial field: \(2\).
Explanation: \(\textbf{Determine the torque in the ordinary uniform field:}\)
The magnetic-torque magnitude on a coil is
\[
\tau_B=NIAB\sin\theta
\]
The angle between magnetic moment and field is
\[
\theta=90^\circ-\phi
\]
Therefore,
\[
\tau_B=NIAB\cos\phi
\]
The torsional restoring torque has magnitude
\[
\tau_r=C\phi
\]
At equilibrium,
\[
NIAB\cos\phi=C\phi
\]
Thus,
\[
I(\phi)=\frac{C\phi}{NAB\cos\phi}
\]
\(\textbf{Compare the currents at the two deflections:}\)
For the specified angles,
\[
\frac{I_{60}}{I_{30}}
=\frac{(60^\circ)/\cos60^\circ}{(30^\circ)/\cos30^\circ}
\]
The ratio of angular deflections is
\[
\frac{60^\circ}{30^\circ}=2
\]
Using
\[
\cos30^\circ=\frac{\sqrt3}{2},\qquad
\cos60^\circ=\frac12
\]
we obtain
\[
\frac{I_{60}}{I_{30}}
=2\frac{\cos30^\circ}{\cos60^\circ}
\]
\[
\frac{I_{60}}{I_{30}}=2\sqrt3
\]
\(\textbf{Compare with a radial-field galvanometer:}\)
In a radial field, the magnetic moment remains perpendicular to the magnetic field.
Consequently,
\[
\tau_B=NIAB
\]
The equilibrium relation is
\[
NIAB=C\phi
\]
Therefore,
\[
I\propto\phi
\]
For the same two angular deflections,
\[
\frac{I_{60}}{I_{30}}=\frac{60^\circ}{30^\circ}=2
\]
\(\textbf{Final answer:}\)
\[
\boxed{\left(\frac{I_{60}}{I_{30}}\right)_{\mathrm{ordinary}}=2\sqrt3,\qquad
\left(\frac{I_{60}}{I_{30}}\right)_{\mathrm{radial}}=2}
\]
The ordinary uniform field introduces a changing cosine factor into the magnetic torque.
As the coil deflects, the magnetic torque per unit current decreases.
A larger increase in current is therefore needed to reach the second deflection.
In a radial field, this angular reduction is avoided, giving a linear current–deflection relation.
307. A moving-coil galvanometer has \(100\) turns, coil area \(2.0\times10^{-4}\,\text{m}^2\), and radial magnetic field \(0.50\,\text{T}\). Its pointer scale has a fixed additive zero-reading offset, although the moving coil itself is mechanically at its zero-deflection position when no current flows.
The horizontal axis represents moving-coil current \(I\) in microamperes, and the vertical axis represents the indicated angular reading \(\phi_{\mathrm{ind}}\) in radians. The straight-line calibration graph passes through \((0\,\mu\text{A},0.040\,\text{rad})\) and \((20\,\mu\text{A},0.140\,\text{rad})\). The mechanical coil deflection is the indicated reading minus the fixed zero offset.
What are the torsional restoring constant and the actual mechanical coil deflection when the current is \(50\,\mu\text{A}\)?
ⓐ. \(C=1.0\times10^{-6}\,\text{N m rad}^{-1}\); mechanical deflection \(0.290\,\text{rad}\).
ⓑ. \(C=2.0\times10^{-6}\,\text{N m rad}^{-1}\); mechanical deflection \(0.290\,\text{rad}\).
ⓒ. \(C=2.0\times10^{-6}\,\text{N m rad}^{-1}\); mechanical deflection \(0.250\,\text{rad}\).
ⓓ. \(C=5.0\times10^{-6}\,\text{N m rad}^{-1}\); mechanical deflection \(0.250\,\text{rad}\).
Correct Answer: \(C=2.0\times10^{-6}\,\text{N m rad}^{-1}\); mechanical deflection \(0.250\,\text{rad}\).
Explanation: \(\textbf{Separate the zero offset from the physical deflection:}\)
The indicated reading contains a constant additive offset.
Therefore,
\[
\phi_{\mathrm{ind}}=\phi_0+\phi
\]
where \(\phi\) is the actual mechanical deflection.
The graph intercept gives
\[
\phi_0=0.040\,\text{rad}
\]
The intercept does not represent magnetic deflection produced by zero current.
\(\textbf{Find the current sensitivity from the graph slope:}\)
The slope is
\[
S_I=\frac{\Delta\phi_{\mathrm{ind}}}{\Delta I}
\]
Substituting the two calibration points,
\[
S_I=\frac{0.140-0.040}{(20-0)\times10^{-6}}
\]
\[
S_I=\frac{0.100}{20\times10^{-6}}
\]
\[
S_I=5.0\times10^3\,\text{rad A}^{-1}
\]
Subtracting a constant zero offset does not change this slope.
\(\textbf{Determine the torsional constant:}\)
For a radial-field galvanometer,
\[
\phi=\frac{NAB}{C}I
\]
Thus,
\[
S_I=\frac{NAB}{C}
\]
Rearranging,
\[
C=\frac{NAB}{S_I}
\]
Substitute the coil parameters:
\[
C=\frac{(100)(2.0\times10^{-4})(0.50)}
{5.0\times10^3}
\]
\[
C=\frac{0.010}{5.0\times10^3}
\]
\[
C=2.0\times10^{-6}\,\text{N m rad}^{-1}
\]
\(\textbf{Determine the mechanical deflection at }50\,\mu\text{A}\textbf{:}\)
The actual mechanical deflection is
\[
\phi=S_I I
\]
\[
\phi=(5.0\times10^3)(50\times10^{-6})
\]
\[
\phi=0.250\,\text{rad}
\]
The scale would indicate
\[
\phi_{\mathrm{ind}}=0.040+0.250
\]
\[
\phi_{\mathrm{ind}}=0.290\,\text{rad}
\]
\(\textbf{Final answer:}\)
\[
\boxed{C=2.0\times10^{-6}\,\text{N m rad}^{-1},\qquad
\phi=0.250\,\text{rad}}
\]
The graph slope determines current sensitivity, whereas the intercept identifies a fixed reading error.
The mechanical restoring constant must be inferred from the current-dependent deflection, not the raw indicated reading.
At \(50\,\mu\text{A}\), the instrument indicates \(0.290\,\text{rad}\), but the moving coil has actually turned through \(0.250\,\text{rad}\).
Separating calibration offset from physical response prevents an incorrect sensitivity calculation.
308. A rectangular moving-coil galvanometer has \(200\) turns. Each turn has two active vertical sides of length \(0.050\,\text{m}\), separated by \(0.020\,\text{m}\). Its shaped magnetic pole pieces produce a radial magnetic field of magnitude \(0.20\,\text{T}\), perpendicular to the active current-carrying sides throughout the permitted motion.
The instrument carries a steady current of \(50\,\mu\text{A}\). Its torsional restoring constant is \(5.0\times10^{-6}\,\text{N m rad}^{-1}\). Assume that all turns experience the same magnetic torque and that the galvanometer has reached equilibrium.
What are the magnitude of the magnetic force on one active side, counting all \(200\) turns, and the equilibrium angular deflection?
ⓐ. \(1.0\times10^{-4}\,\text{N}\) and \(0.20\,\text{rad}\).
ⓑ. \(2.0\times10^{-4}\,\text{N}\) and \(0.40\,\text{rad}\).
ⓒ. \(1.0\times10^{-4}\,\text{N}\) and \(0.80\,\text{rad}\).
ⓓ. \(1.0\times10^{-4}\,\text{N}\) and \(0.40\,\text{rad}\).
Correct Answer: \(1.0\times10^{-4}\,\text{N}\) and \(0.40\,\text{rad}\).
Explanation: \(\textbf{Determine the force on an active side:}\)
The magnetic-force magnitude on a straight conductor perpendicular to a magnetic field is
\[
F=ILB
\]
For one turn, the active-side length is
\[
L=0.050\,\text{m}
\]
The current is
\[
I=50\times10^{-6}\,\text{A}
\]
The field magnitude is
\[
B=0.20\,\text{T}
\]
Therefore, the force on one active side of one turn is
\[
F_{\mathrm{one}}=(50\times10^{-6})(0.050)(0.20)
\]
\[
F_{\mathrm{one}}=5.0\times10^{-7}\,\text{N}
\]
\(\textbf{Account for all turns:}\)
The galvanometer has
\[
N=200
\]
identical turns.
The total force associated with the corresponding active sides is
\[
F_{\mathrm{side}}=NF_{\mathrm{one}}
\]
\[
F_{\mathrm{side}}=200(5.0\times10^{-7})
\]
\[
F_{\mathrm{side}}=1.0\times10^{-4}\,\text{N}
\]
\(\textbf{Construct the magnetic couple:}\)
The forces on the two active sides act in opposite directions and form a couple.
Their perpendicular separation is the coil width:
\[
w=0.020\,\text{m}
\]
The torque magnitude is
\[
\tau_B=F_{\mathrm{side}}w
\]
\[
\tau_B=(1.0\times10^{-4})(0.020)
\]
\[
\tau_B=2.0\times10^{-6}\,\text{N m}
\]
\(\textbf{Balance magnetic and restoring torques:}\)
At equilibrium,
\[
\tau_B=C\phi
\]
Therefore,
\[
\phi=\frac{\tau_B}{C}
\]
Substituting,
\[
\phi=\frac{2.0\times10^{-6}}{5.0\times10^{-6}}
\]
\[
\phi=0.40\,\text{rad}
\]
\(\textbf{Check using magnetic moment:}\)
The area of one rectangular turn is
\[
A=(0.050)(0.020)=1.0\times10^{-3}\,\text{m}^2
\]
The radial-field torque relation gives
\[
\tau_B=NIAB
\]
\[
\tau_B=(200)(50\times10^{-6})(1.0\times10^{-3})(0.20)
\]
\[
\tau_B=2.0\times10^{-6}\,\text{N m}
\]
This confirms the force-couple calculation.
\(\textbf{Final answer:}\)
\[
\boxed{F_{\mathrm{side}}=1.0\times10^{-4}\,\text{N},\qquad
\phi=0.40\,\text{rad}}
\]
The galvanometer's magnetic torque arises from forces acting on opposite active sides of its rectangular coil.
The force on one active side must account for every turn, but the two side forces must not be added as scalar forces to calculate torque.
Their separation forms the moment arm of the couple.
The result agrees with the compact radial-field torque expression \(NIAB\).
309. An ideal moving-coil galvanometer operates in a radial magnetic field. Its torsional restoring constant is \(C\), and a constant current \(I\) produces a magnetic torque
\[
\tau_B=NIAB
\]
throughout the allowed deflection range.
When the coil is held stationary at its equilibrium reading, its deflection is \(0.20\,\text{rad}\). In a separate experiment, the same constant current is switched on while the coil is initially at rest at zero deflection.
Assume the moving coil is frictionless, damping is negligible, and the radial-field approximation remains valid up to a deflection of \(0.50\,\text{rad}\).
What is the first maximum angular deflection reached by the freely moving coil, and what is the direction of the net torque at that turning point?
ⓐ. \(0.20\,\text{rad}\); net torque zero.
ⓑ. \(0.40\,\text{rad}\); net torque towards decreasing deflection.
ⓒ. \(0.40\,\text{rad}\); net torque towards increasing deflection.
ⓓ. \(0.50\,\text{rad}\); net torque zero.
Correct Answer: \(0.40\,\text{rad}\); net torque towards decreasing deflection.
Explanation: \(\textbf{Use the static equilibrium reading:}\)
The radial-field magnetic torque is constant for a fixed current:
\[
\tau_B=NIAB
\]
The restoring torque is proportional to deflection:
\[
\tau_r=C\phi
\]
At static equilibrium,
\[
\tau_B=C\phi_{\mathrm{eq}}
\]
The measured equilibrium deflection is
\[
\phi_{\mathrm{eq}}=0.20\,\text{rad}
\]
Therefore,
\[
\tau_B=0.20C
\]
\(\textbf{Identify the energy changes during undamped motion:}\)
The coil starts from rest at zero deflection.
As it rotates, the constant magnetic torque does positive rotational work:
\[
W_B=\tau_B\phi
\]
The torsion spring stores potential energy:
\[
U_s=\frac12C\phi^2
\]
Because damping is negligible, mechanical energy is conserved after accounting for the work done by the maintained-current magnetic torque.
\(\textbf{Apply the first-turning-point condition:}\)
At the first maximum deflection, the coil momentarily has zero angular velocity.
Its rotational kinetic energy is therefore again zero.
The magnetic work supplied since release equals the spring energy:
\[
\tau_B\phi_{\max}=\frac12C\phi_{\max}^2
\]
The nonzero turning-point solution satisfies
\[
\phi_{\max}=\frac{2\tau_B}{C}
\]
Using the static equilibrium condition,
\[
\phi_{\max}=2\phi_{\mathrm{eq}}
\]
\[
\phi_{\max}=2(0.20)
\]
\[
\phi_{\max}=0.40\,\text{rad}
\]
\(\textbf{Determine the net torque at the turning point:}\)
The signed net torque in the direction of increasing deflection is
\[
\tau_{\mathrm{net}}=\tau_B-C\phi
\]
At \(\phi=0.40\,\text{rad}\),
\[
\tau_{\mathrm{net}}=0.20C-0.40C
\]
\[
\tau_{\mathrm{net}}=-0.20C
\]
The negative sign indicates a restoring net torque towards decreasing deflection.
\(\textbf{Final answer:}\)
\[
\boxed{\phi_{\max}=0.40\,\text{rad},\qquad
\tau_{\mathrm{net}}=-0.20C}
\]
The static equilibrium deflection is not the same as the first turning point of an undamped coil released from rest.
At the equilibrium angle, the moving coil can still possess angular speed and pass through that position.
It stops momentarily at twice the equilibrium deflection because magnetic work has been stored in the torsion spring.
The net torque there points back towards equilibrium.
Practical galvanometers use damping to suppress such sustained oscillations and permit stable readings.
310. A radial-field moving-coil galvanometer has \(200\) turns, coil area \(2.0\times10^{-3}\,\text{m}^2\), magnetic-field magnitude \(0.25\,\text{T}\), torsional restoring constant \(5.0\times10^{-4}\,\text{N m rad}^{-1}\), and winding resistance \(50\,\Omega\).
An ideal voltage source maintains \(0.060\,\text{V}\) directly across the galvanometer winding.
In a redesigned instrument, the field magnitude is doubled, the torsional restoring constant becomes three times its original value, and the winding resistance becomes \(100\,\Omega\). The number of turns and coil area remain unchanged.
Assume the radial-field model remains valid and both deflections lie within the permitted linear range.
Which option correctly gives the redesigned equilibrium deflection and the ratio of its voltage sensitivity to the original voltage sensitivity?
ⓐ. Deflection \(0.080\,\text{rad}\); voltage-sensitivity ratio \(1/3\).
ⓑ. Deflection \(0.160\,\text{rad}\); voltage-sensitivity ratio \(2/3\).
ⓒ. Deflection \(0.240\,\text{rad}\); voltage-sensitivity ratio \(1\).
ⓓ. Deflection \(0.120\,\text{rad}\); voltage-sensitivity ratio \(1/2\).
Correct Answer: Deflection \(0.080\,\text{rad}\); voltage-sensitivity ratio \(1/3\).
Explanation: \(\textbf{Current sensitivity of the original galvanometer:}\)
In a radial magnetic field, the magnetic torque is
\[
\tau_m=NIAB
\]
The restoring torque at equilibrium is
\[
\tau_r=\kappa\phi
\]
Therefore,
\[
NIAB=\kappa\phi
\]
The current sensitivity is
\[
S_I=\frac{\phi}{I}=\frac{NAB}{\kappa}
\]
Substituting the original parameters,
\[
S_I=
\frac{(200)(2.0\times10^{-3})(0.25)}
{5.0\times10^{-4}}
\]
\[
S_I=200\,\text{rad A}^{-1}
\]
\(\textbf{Original voltage sensitivity:}\)
The voltage sensitivity of the bare galvanometer is
\[
S_V=\frac{\phi}{V}=\frac{S_I}{G}
\]
Thus,
\[
S_V=\frac{200}{50}
\]
\[
S_V=4.0\,\text{rad V}^{-1}
\]
At an applied voltage of \(0.060\,\text{V}\), the original equilibrium deflection is
\[
\phi=S_VV=4.0(0.060)
\]
\[
\phi=0.240\,\text{rad}
\]
\(\textbf{Redesigned current sensitivity:}\)
The magnetic field doubles, while the restoring constant triples.
The number of turns and coil area are unchanged.
Therefore,
\[
\frac{S'_I}{S_I}=\frac23
\]
\[
S'_I=\frac23(200)
\]
\[
S'_I=\frac{400}{3}\,\text{rad A}^{-1}
\]
\(\textbf{Redesigned voltage sensitivity:}\)
The winding resistance becomes \(100\,\Omega\).
Hence,
\[
S'_V=\frac{S'_I}{G'}
\]
\[
S'_V=\frac{400/3}{100}
\]
\[
S'_V=\frac43\,\text{rad V}^{-1}
\]
Consequently,
\[
\frac{S'_V}{S_V}=\frac{4/3}{4}=\frac13
\]
\(\textbf{New equilibrium deflection:}\)
At the same applied voltage,
\[
\phi'=S'_VV
\]
\[
\phi'=\frac43(0.060)
\]
\[
\phi'=0.080\,\text{rad}
\]
Although the stronger magnetic field increases magnetic torque per unit current, the larger restoring constant reduces current sensitivity.
The increased winding resistance further reduces the current produced by a fixed applied voltage.
Therefore, current sensitivity and voltage sensitivity must be compared separately.
The final voltage sensitivity is one-third of the original, and the equilibrium deflection is \(0.080\,\text{rad}\).
311. Two moving-coil galvanometers \(P\) and \(Q\) operate in radial magnetic fields. Their current sensitivities are identical:
\[
S_I=6000\,\text{rad A}^{-1}
\]
However, their coil resistances and maximum permissible angular deflections differ.
| Instrument | Coil resistance | Maximum angular deflection |
| P | \(60\,\Omega\) | \(0.24\,\text{rad}\) |
| Q | \(180\,\Omega\) | \(0.36\,\text{rad}\) |
Each galvanometer is tested separately by applying a potential difference of \(3.0\,\text{mV}\) directly across its moving coil. Assume ideal linear response until the permitted full-scale deflection is reached.
Which conclusion correctly compares their voltage sensitivities and full-scale limits?
ⓐ. \(S_{V,P}/S_{V,Q}=3\); instrument P exceeds its full-scale limit, while Q does not.
ⓑ. \(S_{V,P}/S_{V,Q}=1/3\); instrument Q exceeds its full-scale limit, while P does not.
ⓒ. \(S_{V,P}/S_{V,Q}=3\); neither instrument exceeds its full-scale limit.
ⓓ. \(S_{V,P}/S_{V,Q}=1\); both instruments exceed their full-scale limits.
Correct Answer: \(S_{V,P}/S_{V,Q}=3\); instrument P exceeds its full-scale limit, while Q does not.
Explanation: \(\textbf{Distinguish current and voltage sensitivity:}\)
Current sensitivity is
\[
S_I=\frac{\phi}{I}
\]
For a bare galvanometer of resistance \(G\),
\[
V=IG
\]
Therefore, voltage sensitivity is
\[
S_V=\frac{\phi}{V}
\]
\[
S_V=\frac{S_I}{G}
\]
\(\textbf{Compare the two voltage sensitivities:}\)
For instrument P,
\[
S_{V,P}=\frac{6000}{60}
\]
\[
S_{V,P}=100\,\text{rad V}^{-1}
\]
For instrument Q,
\[
S_{V,Q}=\frac{6000}{180}
\]
\[
S_{V,Q}=\frac{100}{3}\,\text{rad V}^{-1}
\]
Hence,
\[
\frac{S_{V,P}}{S_{V,Q}}=3
\]
\(\textbf{Determine their full-scale currents:}\)
At the maximum permissible angular deflection,
\[
I_g=\frac{\phi_{\max}}{S_I}
\]
For P,
\[
I_{g,P}=\frac{0.24}{6000}
\]
\[
I_{g,P}=40\,\mu\text{A}
\]
For Q,
\[
I_{g,Q}=\frac{0.36}{6000}
\]
\[
I_{g,Q}=60\,\mu\text{A}
\]
\(\textbf{Convert these limits into terminal voltages:}\)
For P,
\[
V_{g,P}=I_{g,P}G_P
\]
\[
V_{g,P}=(40\times10^{-6})(60)
\]
\[
V_{g,P}=2.4\,\text{mV}
\]
For Q,
\[
V_{g,Q}=(60\times10^{-6})(180)
\]
\[
V_{g,Q}=10.8\,\text{mV}
\]
\(\textbf{Assess the applied test voltage:}\)
The applied \(3.0\,\text{mV}\) exceeds P's permissible \(2.4\,\text{mV}\).
It remains below Q's permissible \(10.8\,\text{mV}\).
Thus, only P is driven beyond its full-scale limit.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{S_{V,P}}{S_{V,Q}}=3,\quad
V_{g,P}=2.4\,\text{mV},\quad
V_{g,Q}=10.8\,\text{mV}}
\]
Equal current sensitivities do not imply equal voltage sensitivities.
The internal resistance determines how much current a specified terminal voltage produces.
The permissible angular deflection independently determines the full-scale current.
A galvanometer can therefore have greater voltage sensitivity but a smaller safe voltage range.
312. A moving-coil galvanometer has unknown resistance \(G\) and unknown current sensitivity \(S_I\). Its magnetic field is radial, and its current–deflection response is linear over the range used.
The galvanometer is tested by applying a variable ideal voltage source across two alternative arrangements.
Graph P plots angular deflection against applied voltage when the source is connected directly across the galvanometer. It is a straight line through the origin with slope \(60\,\text{rad V}^{-1}\). Graph Q plots deflection against applied voltage when a known \(100\,\Omega\) resistor is connected in series with the same galvanometer. It is another straight line through the origin, with slope \(20\,\text{rad V}^{-1}\). The applied voltage is measured across the complete arrangement in each trial.
Determine \(G\), \(S_I\), and the angular deflection in arrangement Q when the applied voltage is \(20\,\text{mV}\).
ⓐ. \(G=100\,\Omega,\ S_I=6000\,\text{rad A}^{-1},\ \phi=0.40\,\text{rad}\)
ⓑ. \(G=50\,\Omega,\ S_I=3000\,\text{rad A}^{-1},\ \phi=0.20\,\text{rad}\)
ⓒ. \(G=50\,\Omega,\ S_I=1500\,\text{rad A}^{-1},\ \phi=0.40\,\text{rad}\)
ⓓ. \(G=50\,\Omega,\ S_I=3000\,\text{rad A}^{-1},\ \phi=0.40\,\text{rad}\)
Correct Answer: \(G=50\,\Omega,\ S_I=3000\,\text{rad A}^{-1},\ \phi=0.40\,\text{rad}\)
Explanation: \(\textbf{Express the directly connected calibration slope:}\)
The galvanometer deflection is
\[
\phi=S_I I
\]
When voltage \(V\) is applied directly across its resistance \(G\),
\[
I=\frac VG
\]
Therefore,
\[
\phi=\frac{S_I}{G}V
\]
The measured slope of graph P is
\[
s_P=\frac{S_I}{G}=60\,\text{rad V}^{-1}
\]
\(\textbf{Include the known series resistance:}\)
In arrangement Q, the galvanometer and \(100\,\Omega\) resistor carry the same current.
Therefore,
\[
I_Q=\frac{V}{G+100}
\]
The corresponding deflection is
\[
\phi_Q=\frac{S_I}{G+100}V
\]
Thus, graph Q has slope
\[
s_Q=\frac{S_I}{G+100}=20\,\text{rad V}^{-1}
\]
\(\textbf{Infer the internal resistance from the slope ratio:}\)
\[
\frac{s_P}{s_Q}=\frac{G+100}{G}
\]
Substituting,
\[
\frac{60}{20}=\frac{G+100}{G}
\]
\[
3G=G+100
\]
\[
2G=100
\]
\[
G=50\,\Omega
\]
\(\textbf{Recover the current sensitivity:}\)
\[
S_I=s_PG
\]
\[
S_I=(60)(50)
\]
\[
S_I=3000\,\text{rad A}^{-1}
\]
\(\textbf{Predict the deflection at the specified voltage:}\)
The voltage in arrangement Q is
\[
V=20\,\text{mV}=0.020\,\text{V}
\]
Using its measured slope,
\[
\phi_Q=s_QV
\]
\[
\phi_Q=(20)(0.020)
\]
\[
\phi_Q=0.40\,\text{rad}
\]
\(\textbf{Final answer:}\)
\[
\boxed{G=50\,\Omega,\quad
S_I=3000\,\text{rad A}^{-1},\quad
\phi_Q=0.40\,\text{rad}}
\]
The two calibration slopes separate the galvanometer's magnetic sensitivity from its electrical resistance.
Adding the series resistor reduces the current generated by a prescribed applied voltage.
It does not alter the intrinsic current sensitivity of the galvanometer.
The comparison therefore permits both unknown instrument parameters to be reconstructed from voltage–deflection measurements.
313. A moving-coil galvanometer operates in a radial magnetic field. Its current sensitivity and voltage sensitivity are
\[
S_I=\frac{NAB}{C},\qquad S_V=\frac{NAB}{CG}
\]
where \(G\) is the resistance of the moving coil and \(C\) its torsional constant.
Four independent design modifications are considered. Each modification starts from the same original galvanometer, and only the quantities explicitly mentioned are changed.
| Modification | Changed quantities |
| P | Number of turns doubled; coil resistance doubled |
| Q | Torsional constant doubled |
| R | Magnetic field doubled; coil resistance halved |
| S | Coil resistance doubled without changing the magnetic or mechanical parameters |
Match each modification with the ordered pair \((S_I'/S_I,\ S_V'/S_V)\).
List II:
1. \((2,1)\)
2. \((1/2,1/2)\)
3. \((2,4)\)
4. \((1,1/2)\)
Which matching is correct?
ⓐ. P–1, Q–2, R–3, S–4
ⓑ. P–3, Q–2, R–1, S–4
ⓒ. P–1, Q–4, R–3, S–2
ⓓ. P–2, Q–1, R–3, S–4
Correct Answer: P–1, Q–2, R–3, S–4
Explanation: The current sensitivity measures angular deflection per unit current through the galvanometer coil.
For radial-field operation,
\[
S_I=\frac{NAB}{C}
\]
The coil's electrical resistance does not appear in this relation.
Voltage sensitivity measures angular deflection per unit potential difference applied directly across the bare galvanometer.
Therefore,
\[
S_V=\frac{S_I}{G}
\]
In modification P, the number of turns doubles while the torsional constant, area and field remain unchanged.
Current sensitivity consequently doubles.
However, the coil resistance also doubles, so the ratio \(S_I/G\) remains unchanged.
Thus, P corresponds to \((2,1)\), which is entry 1.
In modification Q, only the torsional constant doubles.
Magnetic torque for a given current is unchanged, but the restoring torque per unit angle doubles.
Current sensitivity is halved.
Because resistance is unchanged, voltage sensitivity is also halved.
Thus, Q corresponds to \((1/2,1/2)\), which is entry 2.
In modification R, doubling the radial field doubles current sensitivity.
Halving the resistance simultaneously doubles the current produced by a given terminal voltage.
Consequently, voltage sensitivity becomes four times its original value.
Thus, R corresponds to \((2,4)\), which is entry 3.
In modification S, the magnetic and mechanical parameters are unchanged.
Current sensitivity remains unchanged.
Doubling resistance halves voltage sensitivity.
Thus, S corresponds to \((1,1/2)\), which is entry 4.
The comparison shows that current sensitivity and voltage sensitivity need not change by the same factor.
The magnetic and mechanical design controls the deflection per unit current, while electrical resistance additionally controls the deflection per unit voltage.
314. A moving-coil galvanometer initially has resistance \(40\,\Omega\) and current sensitivity \(5000\,\text{rad A}^{-1}\). Its coil warms slightly during use, causing its resistance to increase by \(25\%\). Assume that its magnetic field, torsional constant, coil area and turn number remain unchanged.
Two experiments are performed independently before and after warming.
Experiment P: An ideal current source maintains a current of \(20\,\mu\text{A}\) through the moving coil.
Experiment Q: An ideal voltage source maintains a potential difference of \(2.0\,\text{mV}\) directly across the moving coil.
Which statement correctly describes the deflection measurements?
ⓐ. In P, the deflection decreases from \(0.10\) to \(0.080\,\text{rad}\); in Q, it remains \(0.25\,\text{rad}\).
ⓑ. In P, the deflection remains \(0.10\,\text{rad}\); in Q, it decreases from \(0.25\) to \(0.20\,\text{rad}\).
ⓒ. In P, the deflection remains \(0.10\,\text{rad}\); in Q, it increases from \(0.20\) to \(0.25\,\text{rad}\).
ⓓ. In P, the deflection increases from \(0.10\) to \(0.125\,\text{rad}\); in Q, it remains \(0.25\,\text{rad}\).
Correct Answer: In P, the deflection remains \(0.10\,\text{rad}\); in Q, it decreases from \(0.25\) to \(0.20\,\text{rad}\).
Explanation: \(\textbf{Identify the unaffected intrinsic sensitivity:}\)
For a radial-field galvanometer,
\[
S_I=\frac{NAB}{C}
\]
The stated warming changes only electrical resistance.
Therefore, the intrinsic current sensitivity remains
\[
S_I=5000\,\text{rad A}^{-1}
\]
The new coil resistance is
\[
G'=(1.25)(40)
\]
\[
G'=50\,\Omega
\]
\(\textbf{Experiment P — prescribed current:}\)
An ideal current source maintains
\[
I_P=20\times10^{-6}\,\text{A}
\]
The coil deflection is
\[
\phi_P=S_I I_P
\]
\[
\phi_P=(5000)(20\times10^{-6})
\]
\[
\phi_P=0.10\,\text{rad}
\]
Because both current and current sensitivity remain unchanged, warming does not change this deflection.
\(\textbf{Experiment Q — prescribed terminal voltage:}\)
For the original resistance,
\[
I_{Q,1}=\frac{V}{G}
\]
\[
I_{Q,1}=\frac{2.0\times10^{-3}}{40}
\]
\[
I_{Q,1}=50\,\mu\text{A}
\]
Therefore,
\[
\phi_{Q,1}=(5000)(50\times10^{-6})
\]
\[
\phi_{Q,1}=0.25\,\text{rad}
\]
After warming,
\[
I_{Q,2}=\frac{2.0\times10^{-3}}{50}
\]
\[
I_{Q,2}=40\,\mu\text{A}
\]
The new deflection is
\[
\phi_{Q,2}=(5000)(40\times10^{-6})
\]
\[
\phi_{Q,2}=0.20\,\text{rad}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\phi_P=0.10\,\text{rad}\ \text{in both cases};\qquad
\phi_{Q,1}=0.25\,\text{rad},\quad
\phi_{Q,2}=0.20\,\text{rad}}
\]
An increase in coil resistance does not directly alter the magnetic torque produced by a specified current.
It does reduce the current supplied by a fixed terminal voltage.
The same physical change therefore leaves current-controlled deflection unchanged while decreasing voltage-controlled deflection.
Identifying what the source maintains constant is essential.
315. A moving-coil galvanometer has current sensitivity
\[
S_I=4000\,\text{rad A}^{-1}
\]
and resistance \(80\,\Omega\). Its pointer can safely undergo a maximum mechanical deflection of \(0.40\,\text{rad}\).
The original torsional spring is replaced by another having twice the torsional constant. The coil geometry, resistance, radial magnetic field and permissible maximum angle remain unchanged.
Which statement correctly gives the original and new full-scale currents and the corresponding full-scale voltages applied directly across the bare galvanometer?
ⓐ. Original: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\); new: \(50\,\mu\text{A}\), \(4.0\,\text{mV}\).
ⓑ. Original: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\); new: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\).
ⓒ. Original: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\); new: \(200\,\mu\text{A}\), \(16\,\text{mV}\).
ⓓ. Original: \(200\,\mu\text{A}\), \(16\,\text{mV}\); new: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\).
Correct Answer: Original: \(100\,\mu\text{A}\), \(8.0\,\text{mV}\); new: \(200\,\mu\text{A}\), \(16\,\text{mV}\).
Explanation: \(\textbf{Calculate the original full-scale current:}\)
Current sensitivity is
\[
S_I=\frac{\phi}{I}
\]
At the maximum permissible angle,
\[
I_g=\frac{\phi_{\max}}{S_I}
\]
Substituting,
\[
I_g=\frac{0.40}{4000}
\]
\[
I_g=1.0\times10^{-4}\,\text{A}
\]
\[
I_g=100\,\mu\text{A}
\]
\(\textbf{Determine the original full-scale terminal voltage:}\)
The bare galvanometer has resistance
\[
G=80\,\Omega
\]
Therefore,
\[
V_g=I_gG
\]
\[
V_g=(100\times10^{-6})(80)
\]
\[
V_g=8.0\,\text{mV}
\]
\(\textbf{Determine how the replacement spring changes sensitivity:}\)
For a radial-field galvanometer,
\[
S_I=\frac{NAB}{C}
\]
The new torsional constant is
\[
C'=2C
\]
All magnetic and coil parameters remain unchanged.
Therefore,
\[
S'_I=\frac{S_I}{2}
\]
\[
S'_I=2000\,\text{rad A}^{-1}
\]
\(\textbf{Determine the new full-scale quantities:}\)
The permissible maximum angle is still \(0.40\,\text{rad}\).
Thus,
\[
I'_g=\frac{0.40}{2000}
\]
\[
I'_g=200\,\mu\text{A}
\]
The electrical resistance is unchanged.
Hence,
\[
V'_g=I'_gG
\]
\[
V'_g=(200\times10^{-6})(80)
\]
\[
V'_g=16\,\text{mV}
\]
\(\textbf{Final answer:}\)
\[
\boxed{I_g=100\,\mu\text{A},\quad V_g=8.0\,\text{mV};\qquad
I'_g=200\,\mu\text{A},\quad V'_g=16\,\text{mV}}
\]
A stiffer spring produces less deflection for the same current.
Therefore, current sensitivity decreases, but the current required to reach the same maximum angular deflection increases.
The full-scale voltage increases because coil resistance remains unchanged.
Greater full-scale measuring range and greater sensitivity are not equivalent properties.
316. A moving-coil galvanometer has resistance \(100\,\Omega\) and current sensitivity \(2500\,\text{rad A}^{-1}\). It is connected directly to a real voltage source having emf \(12\,\text{mV}\) and internal resistance \(50\,\Omega\). The galvanometer operates in its linear range.
A student incorrectly calculates the deflection by assuming that the complete source emf appears directly across the moving coil.
Which pair correctly gives the actual deflection and the potential difference across the moving coil?
ⓐ. \(0.30\,\text{rad}\) and \(12\,\text{mV}\)
ⓑ. \(0.20\,\text{rad}\) and \(12\,\text{mV}\)
ⓒ. \(0.20\,\text{rad}\) and \(8.0\,\text{mV}\)
ⓓ. \(0.12\,\text{rad}\) and \(8.0\,\text{mV}\)
Correct Answer: \(0.20\,\text{rad}\) and \(8.0\,\text{mV}\)
Explanation: \(\textbf{Identify the complete electrical resistance:}\)
The source has an internal resistance
\[
r=50\,\Omega
\]
The galvanometer resistance is
\[
G=100\,\Omega
\]
When connected directly to the source, the source's internal resistance and galvanometer resistance are in series.
Therefore,
\[
R_{\mathrm{total}}=r+G
\]
\[
R_{\mathrm{total}}=50+100
\]
\[
R_{\mathrm{total}}=150\,\Omega
\]
\(\textbf{Calculate the actual current through the coil:}\)
The source emf is
\[
\mathcal E=12\times10^{-3}\,\text{V}
\]
Using Ohm's law for the complete circuit,
\[
I=\frac{\mathcal E}{r+G}
\]
Substituting,
\[
I=\frac{12\times10^{-3}}{150}
\]
\[
I=8.0\times10^{-5}\,\text{A}
\]
\[
I=80\,\mu\text{A}
\]
\(\textbf{Determine the galvanometer deflection:}\)
The current sensitivity is
\[
S_I=\frac{\phi}{I}
\]
Therefore,
\[
\phi=S_I I
\]
\[
\phi=(2500)(80\times10^{-6})
\]
\[
\phi=0.20\,\text{rad}
\]
\(\textbf{Determine the coil's terminal voltage:}\)
The potential difference across the galvanometer is
\[
V_g=IG
\]
\[
V_g=(80\times10^{-6})(100)
\]
\[
V_g=8.0\times10^{-3}\,\text{V}
\]
\[
V_g=8.0\,\text{mV}
\]
\(\textbf{Check the remaining source voltage:}\)
The potential drop across the source's internal resistance is
\[
V_r=Ir
\]
\[
V_r=(80\times10^{-6})(50)
\]
\[
V_r=4.0\,\text{mV}
\]
Thus,
\[
V_g+V_r=8.0+4.0=12\,\text{mV}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\phi=0.20\,\text{rad},\qquad V_g=8.0\,\text{mV}}
\]
The intrinsic current sensitivity of the galvanometer has not changed.
However, the source's internal resistance reduces the current entering the moving coil.
The emf of a real source must not automatically be treated as the terminal voltage across a connected instrument.
Ignoring internal resistance would overestimate the galvanometer deflection.
317. Two moving-coil galvanometers have different current sensitivities and coil resistances, but both operate linearly in radial magnetic fields.
| Instrument | Current sensitivity | Coil resistance |
| P | \(6000\,\text{rad A}^{-1}\) | \(60\,\Omega\) |
| Q | \(12000\,\text{rad A}^{-1}\) | \(120\,\Omega\) |
Each instrument is connected separately across the same ideal voltage source, adjusted so that its angular deflection is \(0.30\,\text{rad}\). Assume that the entire electrical power delivered to each moving coil is dissipated in its resistance.
Which statement correctly compares the required terminal voltages and the powers dissipated in the two coils?
ⓐ. Both require \(3.0\,\text{mV}\), and instrument P dissipates twice the power of Q.
ⓑ. Both require \(3.0\,\text{mV}\), and instrument Q dissipates twice the power of P.
ⓒ. P requires \(3.0\,\text{mV}\), Q requires \(6.0\,\text{mV}\), and their powers are equal.
ⓓ. Both require \(6.0\,\text{mV}\), and their powers are equal.
Correct Answer: Both require \(3.0\,\text{mV}\), and instrument P dissipates twice the power of Q.
Explanation: \(\textbf{Find the coil currents needed for the same deflection:}\)
Current sensitivity is
\[
S_I=\frac{\phi}{I}
\]
Therefore,
\[
I=\frac{\phi}{S_I}
\]
For instrument P,
\[
I_P=\frac{0.30}{6000}
\]
\[
I_P=50\,\mu\text{A}
\]
For instrument Q,
\[
I_Q=\frac{0.30}{12000}
\]
\[
I_Q=25\,\mu\text{A}
\]
The more current-sensitive instrument requires less current for the same angular deflection.
\(\textbf{Compare the required terminal voltages:}\)
For P,
\[
V_P=I_PG_P
\]
\[
V_P=(50\times10^{-6})(60)
\]
\[
V_P=3.0\,\text{mV}
\]
For Q,
\[
V_Q=I_QG_Q
\]
\[
V_Q=(25\times10^{-6})(120)
\]
\[
V_Q=3.0\,\text{mV}
\]
The instruments therefore have the same voltage sensitivity:
\[
S_{V,P}=\frac{6000}{60}=100\,\text{rad V}^{-1}
\]
\[
S_{V,Q}=\frac{12000}{120}=100\,\text{rad V}^{-1}
\]
\(\textbf{Compare their electrical powers:}\)
The dissipated power is
\[
P=VI=I^2G
\]
For instrument P,
\[
P_P=(3.0\times10^{-3})(50\times10^{-6})
\]
\[
P_P=1.50\times10^{-7}\,\text{W}
\]
For instrument Q,
\[
P_Q=(3.0\times10^{-3})(25\times10^{-6})
\]
\[
P_Q=7.50\times10^{-8}\,\text{W}
\]
Therefore,
\[
\frac{P_P}{P_Q}=2
\]
\(\textbf{Final answer:}\)
\[
\boxed{V_P=V_Q=3.0\,\text{mV},\qquad
\frac{P_P}{P_Q}=2}
\]
Equal voltage sensitivity means that equal applied voltages produce equal deflections.
It does not mean that the instruments carry equal currents or dissipate equal powers.
Instrument Q requires half the current because its current sensitivity is twice as large.
Its doubled resistance compensates electrically, producing the same terminal voltage.
At that common voltage, Q consequently dissipates half as much power.
318. A moving-coil galvanometer has \(N\) turns, coil area \(A\), radial magnetic field \(B\), torsional constant \(C\), and resistance \(G\). Its current sensitivity is \(S_I\) and voltage sensitivity is \(S_V\).
A redesigned instrument has twice as many turns, and its magnetic-field magnitude is increased to three times the original. Its coil resistance becomes \(2G\). The designer wishes to make the new voltage sensitivity exactly twice the original voltage sensitivity.
Assume that the coil area remains unchanged and that the torsional constant can be adjusted independently.
What must be the ratio \(C'/C\), and what will be the ratio of the new to original current sensitivities?
ⓐ. \(C'/C=3/2\), \(S'_I/S_I=4\)
ⓑ. \(C'/C=3\), \(S'_I/S_I=2\)
ⓒ. \(C'/C=3/2\), \(S'_I/S_I=2\)
ⓓ. \(C'/C=3/4\), \(S'_I/S_I=8\)
Correct Answer: \(C'/C=3/2\), \(S'_I/S_I=4\)
Explanation: \(\textbf{Relate current sensitivity to instrument parameters:}\)
For a moving-coil galvanometer in a radial magnetic field,
\[
S_I=\frac{NAB}{C}
\]
The redesigned instrument has
\[
N'=2N,\qquad B'=3B
\]
Its area is unchanged.
Therefore,
\[
S'_I=\frac{(2N)A(3B)}{C'}
\]
The ratio of current sensitivities is
\[
\frac{S'_I}{S_I}
=\frac{6NAB/C'}{NAB/C}
\]
\[
\frac{S'_I}{S_I}=6\frac{C}{C'}
\]
\(\textbf{Impose the required voltage-sensitivity change:}\)
The voltage sensitivity of a bare galvanometer is
\[
S_V=\frac{S_I}{G}
\]
The redesigned resistance is
\[
G'=2G
\]
The required condition is
\[
S'_V=2S_V
\]
Substituting the voltage-sensitivity expressions,
\[
\frac{S'_I}{2G}=2\frac{S_I}{G}
\]
Multiplying by \(2G\),
\[
S'_I=4S_I
\]
Thus,
\[
\frac{S'_I}{S_I}=4
\]
\(\textbf{Determine the required torsional constant:}\)
Combine this condition with the magnetic sensitivity relation:
\[
6\frac{C}{C'}=4
\]
Rearranging,
\[
\frac{C'}{C}=\frac64
\]
\[
\frac{C'}{C}=\frac32
\]
\(\textbf{Verify the voltage-sensitivity target:}\)
With the chosen spring,
\[
\frac{S'_I}{S_I}=4
\]
The coil resistance doubles.
Therefore,
\[
\frac{S'_V}{S_V}
=\frac{S'_I/S_I}{G'/G}
\]
\[
\frac{S'_V}{S_V}=\frac42=2
\]
The required voltage-sensitivity condition is satisfied.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{C'}{C}=\frac32,\qquad
\frac{S'_I}{S_I}=4}
\]
Doubling the turn number and tripling the field would increase current sensitivity sixfold if the spring were unchanged.
However, the simultaneous increase in electrical resistance reduces the gain in voltage sensitivity.
A stronger restoring spring is therefore required to obtain the specified voltage-sensitivity increase of two.
The design constraints must be applied together rather than treating magnetic and electrical improvements independently.
319. An ideal radial-field moving-coil galvanometer is tested using electrical and mechanical measurements. An applied potential difference of \(2.0\,\text{mV}\), connected directly across its moving coil, produces angular deflection \(0.20\,\text{rad}\).
At this operating point, the power dissipated in the coil is measured to be \(0.040\,\mu\text{W}\).
The same galvanometer is then connected across an ideal \(1.0\,\text{mV}\) source through an additional \(100\,\Omega\) series resistor. Its magnetic and mechanical properties remain unchanged.
What are the moving-coil resistance, its intrinsic current sensitivity, and the final angular deflection?
ⓐ. \(G=50\,\Omega,\ S_I=5000\,\text{rad A}^{-1},\ \phi=0.050\,\text{rad}\)
ⓑ. \(G=100\,\Omega,\ S_I=10000\,\text{rad A}^{-1},\ \phi=0.10\,\text{rad}\)
ⓒ. \(G=100\,\Omega,\ S_I=10000\,\text{rad A}^{-1},\ \phi=0.050\,\text{rad}\)
ⓓ. \(G=200\,\Omega,\ S_I=20000\,\text{rad A}^{-1},\ \phi=0.050\,\text{rad}\)
Correct Answer: \(G=100\,\Omega,\ S_I=10000\,\text{rad A}^{-1},\ \phi=0.050\,\text{rad}\)
Explanation: \(\textbf{Infer resistance from the voltage and power measurements:}\)
The initial terminal voltage is
\[
V_1=2.0\times10^{-3}\,\text{V}
\]
The measured dissipated power is
\[
P_1=0.040\,\mu\text{W}
\]
\[
P_1=4.0\times10^{-8}\,\text{W}
\]
For a resistive moving coil,
\[
P=\frac{V^2}{G}
\]
Therefore,
\[
G=\frac{V_1^2}{P_1}
\]
Substituting,
\[
G=\frac{(2.0\times10^{-3})^2}{4.0\times10^{-8}}
\]
\[
G=\frac{4.0\times10^{-6}}{4.0\times10^{-8}}
\]
\[
G=100\,\Omega
\]
\(\textbf{Recover the original current and sensitivity:}\)
The original current is
\[
I_1=\frac{V_1}{G}
\]
\[
I_1=\frac{2.0\times10^{-3}}{100}
\]
\[
I_1=20\,\mu\text{A}
\]
Current sensitivity is
\[
S_I=\frac{\phi_1}{I_1}
\]
\[
S_I=\frac{0.20}{20\times10^{-6}}
\]
\[
S_I=10000\,\text{rad A}^{-1}
\]
\(\textbf{Determine the current with the added series resistance:}\)
The second source has voltage
\[
V_2=1.0\times10^{-3}\,\text{V}
\]
The galvanometer and series resistor each have resistance \(100\,\Omega\).
Therefore,
\[
R_{\mathrm{total}}=100+100
\]
\[
R_{\mathrm{total}}=200\,\Omega
\]
The current is
\[
I_2=\frac{1.0\times10^{-3}}{200}
\]
\[
I_2=5.0\,\mu\text{A}
\]
\(\textbf{Predict the new deflection:}\)
\[
\phi_2=S_I I_2
\]
\[
\phi_2=(10000)(5.0\times10^{-6})
\]
\[
\phi_2=0.050\,\text{rad}
\]
\(\textbf{Final answer:}\)
\[
\boxed{G=100\,\Omega,\quad
S_I=10000\,\text{rad A}^{-1},\quad
\phi_2=0.050\,\text{rad}}
\]
The initial power measurement supplies independent information about the coil resistance.
The measured deflection and recovered current then determine intrinsic current sensitivity.
The external series resistor reduces the current supplied by the second voltage source but does not change that intrinsic sensitivity.
The final deflection must be calculated from the actual current, not from the entire applied voltage divided by the bare coil resistance alone.
320. Two circular moving coils are constructed using the same total length of conducting wire, of the same material and uniform cross-sectional area. Both operate in identical radial magnetic fields and have the same torsional restoring constant.
Coil P contains \(200\) circular turns, each of radius \(5.0\,\text{cm}\). Coil Q contains \(100\) circular turns, each of radius \(10.0\,\text{cm}\). The windings are assumed sufficiently thin for all turns in a given coil to have the stated radius. The moving-coil resistance is due only to the winding wire.
Which statement correctly compares the intrinsic current sensitivities and voltage sensitivities of the two galvanometers?
ⓐ. Q has twice the current sensitivity but half the voltage sensitivity of P.
ⓑ. Q has twice both the current sensitivity and the voltage sensitivity of P.
ⓒ. Q has half the current sensitivity but the same voltage sensitivity as P.
ⓓ. Both instruments have equal current and voltage sensitivities because their total winding-wire lengths are equal.
Correct Answer: Q has twice both the current sensitivity and the voltage sensitivity of P.
Explanation: \(\textbf{Compare the total lengths of winding wire:}\)
For a circular coil with \(N\) turns and radius \(R\), the approximate winding-wire length is
\[
\ell_w=2\pi NR
\]
For P,
\[
\ell_P=2\pi(200)(0.050)
\]
\[
\ell_P=20\pi\,\text{m}
\]
For Q,
\[
\ell_Q=2\pi(100)(0.10)
\]
\[
\ell_Q=20\pi\,\text{m}
\]
Thus, both moving coils use equal lengths of the same conducting wire.
Their electrical resistances are equal because resistivity and wire cross-sectional area are also the same.
\(\textbf{Compare their magnetic moments per unit current:}\)
The area of one circular turn is
\[
A=\pi R^2
\]
For radial-field galvanometers,
\[
S_I=\frac{NAB}{C}
\]
Because \(B\) and \(C\) are identical, current sensitivity is proportional to \(NR^2\).
Hence,
\[
\frac{S_{I,Q}}{S_{I,P}}
=\frac{N_QR_Q^2}{N_PR_P^2}
\]
Substituting,
\[
\frac{S_{I,Q}}{S_{I,P}}
=\frac{100(0.10)^2}{200(0.050)^2}
\]
\[
\frac{S_{I,Q}}{S_{I,P}}
=\frac{1.0}{0.50}
\]
\[
\frac{S_{I,Q}}{S_{I,P}}=2
\]
\(\textbf{Determine the voltage-sensitivity ratio:}\)
The voltage sensitivity is
\[
S_V=\frac{S_I}{G}
\]
The winding resistances are equal:
\[
G_Q=G_P
\]
Therefore,
\[
\frac{S_{V,Q}}{S_{V,P}}
=\frac{S_{I,Q}}{S_{I,P}}
\]
\[
\frac{S_{V,Q}}{S_{V,P}}=2
\]
\(\textbf{Final answer:}\)
\[
\boxed{\frac{S_{I,Q}}{S_{I,P}}=2,\qquad
\frac{S_{V,Q}}{S_{V,P}}=2}
\]
Equal total winding-wire length fixes the coil resistance under the stated construction assumptions.
However, the larger radius of Q increases the enclosed area per turn.
Its halved turn count does not completely compensate for that area increase.
Consequently, Q has twice the current sensitivity.
Because the resistances remain equal, its voltage sensitivity also doubles.
The comparison illustrates why turn number alone cannot determine galvanometer sensitivity.
321. A moving-coil galvanometer has coil resistance \(G\), maximum safe angular deflection \(\phi_{\max}\), and intrinsic current sensitivity \(S_I\). Its bare-coil voltage sensitivity is \(S_V\).
Consider the following statements for modifications that preserve the validity of radial-field operation.
Statement I: If the current sensitivity increases while the permitted maximum angular deflection remains unchanged, the bare galvanometer's full-scale current decreases.
Statement II: Adding resistance in series with the moving coil does not change its intrinsic current sensitivity, but it reduces deflection per unit voltage applied across the complete series arrangement.
Statement III: If two galvanometers have equal voltage sensitivities, they necessarily have equal current sensitivities even when their coil resistances differ.
Statement IV: If only the moving-coil resistance changes, while its magnetic and mechanical parameters remain fixed, intrinsic current sensitivity is unchanged but bare-coil voltage sensitivity changes.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: The equilibrium response of a radial-field moving-coil galvanometer is
\[
\phi=\frac{NAB}{C}I
\]
Its intrinsic current sensitivity is therefore
\[
S_I=\frac{\phi}{I}=\frac{NAB}{C}
\]
For a fixed permissible maximum deflection,
\[
I_g=\frac{\phi_{\max}}{S_I}
\]
Increasing current sensitivity consequently decreases the current required to reach full scale.
Statement I is correct.
If an external series resistor is added, the same prescribed current through the galvanometer still produces the same magnetic torque and deflection.
Intrinsic current sensitivity therefore remains unchanged.
However, a given potential difference across the complete series arrangement produces less current because its total resistance is greater.
The deflection per unit externally applied voltage is therefore reduced.
Statement II is correct.
The bare-coil voltage sensitivity is
\[
S_V=\frac{S_I}{G}
\]
Two instruments may have equal \(S_V\) values even if their current sensitivities and resistances differ.
For example, doubling both \(S_I\) and \(G\) leaves their ratio unchanged.
Statement III is incorrect.
The intrinsic current-sensitivity formula does not contain the moving-coil resistance directly.
If only that resistance changes, \(S_I\) remains fixed under the stated assumptions.
The voltage sensitivity nevertheless changes because \(S_V=S_I/G\).
Statement IV is correct.
Current sensitivity, voltage sensitivity and full-scale range are related but distinct instrument characteristics.
Comparisons must state which quantity is held constant: current through the coil, potential difference across the coil, or potential difference across an extended measuring circuit.
322. A moving-coil galvanometer has resistance \(99\,\Omega\) and gives full-scale deflection when a current of \(1.0\,\text{mA}\) passes through its coil.
It is converted into an ammeter having a full-scale range of \(100\,\text{mA}\) by connecting a suitable shunt resistance directly in parallel with the galvanometer.
Which option correctly gives the required shunt resistance, the effective ammeter resistance, and the current through the shunt at full scale?
ⓐ. \(S=1.0\,\Omega,\ R_A=0.99\,\Omega,\ I_s=99\,\text{mA}\)
ⓑ. \(S=0.99\,\Omega,\ R_A=1.0\,\Omega,\ I_s=99\,\text{mA}\)
ⓒ. \(S=1.0\,\Omega,\ R_A=1.0\,\Omega,\ I_s=100\,\text{mA}\)
ⓓ. \(S=0.10\,\Omega,\ R_A=0.099\,\Omega,\ I_s=99\,\text{mA}\)
Correct Answer: \(S=1.0\,\Omega,\ R_A=0.99\,\Omega,\ I_s=99\,\text{mA}\)
Explanation: \(\textbf{Determine the current division at full scale:}\)
The galvanometer reaches its maximum safe deflection at
\[
I_g=1.0\,\text{mA}
\]
The desired ammeter full-scale current is
\[
I_A=100\,\text{mA}
\]
The shunt and galvanometer are connected in parallel.
Therefore, the total measured current divides between them:
\[
I_A=I_g+I_s
\]
Hence,
\[
I_s=I_A-I_g
\]
\[
I_s=100-1.0
\]
\[
I_s=99\,\text{mA}
\]
\(\textbf{Determine the shunt resistance:}\)
Parallel branches have the same potential difference.
Therefore,
\[
I_gG=I_sS
\]
Rearranging,
\[
S=\frac{I_gG}{I_s}
\]
Substituting,
\[
S=\frac{(1.0\times10^{-3})(99)}{99\times10^{-3}}
\]
\[
S=1.0\,\Omega
\]
\(\textbf{Calculate the effective resistance of the converted ammeter:}\)
The galvanometer and shunt form a parallel combination.
Thus,
\[
R_A=\frac{GS}{G+S}
\]
Substituting,
\[
R_A=\frac{(99)(1.0)}{99+1.0}
\]
\[
R_A=0.99\,\Omega
\]
\(\textbf{Verify using the full-scale terminal voltage:}\)
The potential difference across the galvanometer at full scale is
\[
V_g=I_gG
\]
\[
V_g=(1.0\times10^{-3})(99)
\]
\[
V_g=0.099\,\text{V}
\]
The complete ammeter carries \(0.100\,\text{A}\).
Therefore,
\[
R_A=\frac{0.099}{0.100}
\]
\[
R_A=0.99\,\Omega
\]
This independently confirms the parallel-resistance result.
\(\textbf{Final answer:}\)
\[
\boxed{S=1.0\,\Omega,\qquad
R_A=0.99\,\Omega,\qquad
I_s=99\,\text{mA}}
\]
The galvanometer itself must carry only its safe full-scale current.
The shunt diverts the remaining current around the moving coil.
The converted instrument has a much smaller resistance than the bare galvanometer, making it more suitable for series connection in a circuit.
The shunt current must not be confused with the total current being measured.
323. A moving-coil galvanometer has unknown coil resistance \(G\) and unknown full-scale current \(I_g\). It is converted into two different ammeters by connecting different shunts directly across its moving coil.
| Trial | Shunt resistance | Measured full-scale ammeter current |
| P | \(2.0\,\Omega\) | \(0.100\,\text{A}\) |
| Q | \(1.0\,\Omega\) | \(0.198\,\text{A}\) |
The galvanometer itself is unchanged between trials, and connecting-lead resistance is negligible.
Determine its full-scale current, its coil resistance, and the voltage across the converted ammeter at full scale in Trial P.
ⓐ. \(I_g=1.0\,\text{mA},\ G=196\,\Omega,\ V_P=0.196\,\text{V}\)
ⓑ. \(I_g=2.0\,\text{mA},\ G=98\,\Omega,\ V_P=0.100\,\text{V}\)
ⓒ. \(I_g=2.0\,\text{mA},\ G=98\,\Omega,\ V_P=0.196\,\text{V}\)
ⓓ. \(I_g=4.0\,\text{mA},\ G=49\,\Omega,\ V_P=0.196\,\text{V}\)
Correct Answer: \(I_g=2.0\,\text{mA},\ G=98\,\Omega,\ V_P=0.196\,\text{V}\)
Explanation: \(\textbf{Use current division at the full-scale condition:}\)
For a galvanometer of resistance \(G\) with parallel shunt \(S\),
\[
I=I_g+I_s
\]
Both parallel branches have the same voltage:
\[
I_gG=I_sS
\]
Thus,
\[
I_s=\frac{I_gG}{S}
\]
The complete ammeter full-scale current is therefore
\[
I=I_g\left(1+\frac GS\right)
\]
\(\textbf{Write the two calibration equations:}\)
For Trial P,
\[
0.100=I_g\left(1+\frac G2\right)
\]
For Trial Q,
\[
0.198=I_g(1+G)
\]
Use amperes and ohms consistently in these equations.
Expanding,
\[
0.100=I_g+\frac{I_gG}{2}
\]
\[
0.198=I_g+I_gG
\]
\(\textbf{Eliminate the unknown current–resistance product:}\)
Multiply the first equation by two:
\[
0.200=2I_g+I_gG
\]
Subtract the second equation:
\[
0.200-0.198=2I_g-I_g
\]
\[
I_g=0.002\,\text{A}
\]
\[
I_g=2.0\,\text{mA}
\]
\(\textbf{Recover the galvanometer resistance:}\)
Using Trial Q,
\[
0.198=0.002(1+G)
\]
Dividing by \(0.002\),
\[
99=1+G
\]
\[
G=98\,\Omega
\]
\(\textbf{Determine the full-scale terminal voltage in Trial P:}\)
At full scale, the galvanometer carries \(I_g\) regardless of which shunt is used.
Therefore,
\[
V_P=I_gG
\]
Substituting,
\[
V_P=(0.002)(98)
\]
\[
V_P=0.196\,\text{V}
\]
\(\textbf{Final answer:}\)
\[
\boxed{I_g=2.0\,\text{mA},\qquad
G=98\,\Omega,\qquad
V_P=0.196\,\text{V}}
\]
The two full-scale measurements supply independent equations for the unknown galvanometer parameters.
Changing the shunt alters the total current that can be measured, but the moving coil reaches full scale at the same intrinsic current.
The voltage across that coil at full scale is likewise unchanged.
The measurements can therefore be used to reconstruct both its resistance and full-scale current without directly opening the galvanometer.
324. A galvanometer has resistance \(40\,\Omega\) and full-scale current \(5.0\,\text{mA}\). It is converted into a \(1.0\,\text{A}\) ammeter by connecting a suitable shunt resistance across its moving coil.
The converted ammeter is inserted in series with a \(4.8\,\Omega\) resistor and an ideal \(2.0\,\text{V}\) battery.
The battery and resistor would carry current \(I_0\) if connected without any ammeter. When the converted ammeter is inserted, the circuit carries current \(I_m\), which it indicates.
Which option correctly gives the effective ammeter resistance, its indicated current, and the percentage by which the indicated current is below the undisturbed current?
ⓐ. \(R_A=0.20\,\Omega,\ I_m=0.40\,\text{A},\ 4.0\%\)
ⓑ. \(R_A=0.20\,\Omega,\ I_m=0.40\,\text{A},\ 5.0\%\)
ⓒ. \(R_A=0.40\,\Omega,\ I_m=0.385\,\text{A},\ 7.7\%\)
ⓓ. \(R_A=0.20\,\Omega,\ I_m=0.417\,\text{A},\ 4.0\%\)
Correct Answer: \(R_A=0.20\,\Omega,\ I_m=0.40\,\text{A},\ 4.0\%\)
Explanation: \(\textbf{Determine the converted ammeter's effective resistance:}\)
The galvanometer has
\[
G=40\,\Omega
\]
and full-scale current
\[
I_g=5.0\times10^{-3}\,\text{A}
\]
The desired ammeter full-scale current is
\[
I_A=1.0\,\text{A}
\]
The full-scale voltage across the galvanometer is
\[
V_g=I_gG
\]
\[
V_g=(5.0\times10^{-3})(40)
\]
\[
V_g=0.20\,\text{V}
\]
The same voltage appears across the complete converted ammeter at its full-scale current.
Therefore,
\[
R_A=\frac{V_g}{I_A}
\]
\[
R_A=\frac{0.20}{1.0}
\]
\[
R_A=0.20\,\Omega
\]
\(\textbf{Calculate the original undisturbed circuit current:}\)
Without the ammeter, the circuit contains the ideal battery and \(4.8\,\Omega\) resistor.
Hence,
\[
I_0=\frac{V}{R}
\]
\[
I_0=\frac{2.0}{4.8}
\]
\[
I_0=\frac5{12}\,\text{A}
\]
\[
I_0\approx0.4167\,\text{A}
\]
\(\textbf{Include the ammeter's insertion resistance:}\)
The converted ammeter is connected in series.
Therefore, the circuit resistance becomes
\[
R_{\mathrm{total}}=4.8+0.20
\]
\[
R_{\mathrm{total}}=5.0\,\Omega
\]
The actual current is
\[
I_m=\frac{2.0}{5.0}
\]
\[
I_m=0.40\,\text{A}
\]
This is within the ammeter's \(1.0\,\text{A}\) full-scale range.
\(\textbf{Calculate the measurement loading error:}\)
Relative to the undisturbed current,
\[
\%\text{ error}=\frac{I_0-I_m}{I_0}\times100
\]
Substituting,
\[
\%\text{ error}
=\frac{\frac5{12}-\frac25}{\frac5{12}}\times100
\]
\[
\%\text{ error}
=\frac{\frac1{60}}{\frac5{12}}\times100
\]
\[
\%\text{ error}=4.0\%
\]
\(\textbf{Final answer:}\)
\[
\boxed{R_A=0.20\,\Omega,\qquad
I_m=0.40\,\text{A},\qquad
\%\text{ error}=4.0\%}
\]
The converted ammeter has a low but nonzero effective resistance.
Inserting it into a circuit increases the total series resistance.
The instrument correctly indicates the current flowing after insertion, but that current is smaller than the current in the original circuit.
This is a loading error rather than an error in the galvanometer's current calibration.
325. A galvanometer has resistance \(100\,\Omega\) and full-scale coil current \(1.0\,\text{mA}\). It is initially converted into an ammeter by connecting a \(1.0\,\Omega\) shunt directly across its moving coil.
A second identical \(1.0\,\Omega\) resistor is then connected as an additional shunt directly across the same galvanometer terminals. The original shunt is not removed.
Initially, the ammeter has two parallel branches: the \(100\,\Omega\) galvanometer and one \(1.0\,\Omega\) shunt. After modification, it has three parallel branches: the same galvanometer and two independent \(1.0\,\Omega\) shunts. Connecting-lead resistances are negligible.
What are the new full-scale ammeter current and the effective resistance of the modified ammeter?
ⓐ. \(0.202\,\text{A}\) and \(0.50\,\Omega\)
ⓑ. \(0.201\,\text{A}\) and \(\frac{100}{201}\,\Omega\)
ⓒ. \(0.101\,\text{A}\) and \(\frac{100}{101}\,\Omega\)
ⓓ. \(0.201\,\text{A}\) and \(\frac{100}{101}\,\Omega\)
Correct Answer: \(0.201\,\text{A}\) and \(\frac{100}{201}\,\Omega\)
Explanation: \(\textbf{Determine the voltage at full-scale coil deflection:}\)
The galvanometer itself is unchanged.
Its full-scale current is
\[
I_g=1.0\times10^{-3}\,\text{A}
\]
Its resistance is
\[
G=100\,\Omega
\]
Therefore, the voltage across its terminals at full-scale deflection is
\[
V_g=I_gG
\]
\[
V_g=(1.0\times10^{-3})(100)
\]
\[
V_g=0.100\,\text{V}
\]
\(\textbf{Calculate the original full-scale current:}\)
With one \(1.0\,\Omega\) shunt,
\[
I_{s1}=\frac{V_g}{1.0}
\]
\[
I_{s1}=0.100\,\text{A}
\]
The complete original ammeter current is
\[
I_{A1}=I_g+I_{s1}
\]
\[
I_{A1}=0.001+0.100
\]
\[
I_{A1}=0.101\,\text{A}
\]
\(\textbf{Account for the additional parallel shunt:}\)
The second shunt is connected across the same terminals.
At full-scale coil deflection, each \(1.0\,\Omega\) shunt receives the same voltage \(0.100\,\text{V}\).
Therefore, each carries \(0.100\,\text{A}\).
The complete new current is
\[
I_{A2}=I_g+I_{s1}+I_{s2}
\]
\[
I_{A2}=0.001+0.100+0.100
\]
\[
I_{A2}=0.201\,\text{A}
\]
\(\textbf{Determine the effective resistance:}\)
The two identical shunts have combined resistance
\[
S_{\mathrm{eq}}=\frac{(1.0)(1.0)}{1.0+1.0}
\]
\[
S_{\mathrm{eq}}=0.50\,\Omega
\]
This combination is parallel to the galvanometer.
Therefore,
\[
R_A=\frac{GS_{\mathrm{eq}}}{G+S_{\mathrm{eq}}}
\]
\[
R_A=\frac{(100)(0.50)}{100+0.50}
\]
\[
R_A=\frac{50}{100.50}
\]
\[
R_A=\frac{100}{201}\,\Omega
\]
\(\textbf{Final answer:}\)
\[
\boxed{I_{A2}=0.201\,\text{A},\qquad
R_A=\frac{100}{201}\,\Omega}
\]
Adding a second shunt allows additional current to bypass the moving coil.
The galvanometer itself still reaches full scale at the same \(1.0\,\text{mA}\).
The total full-scale current increases, while the instrument's effective resistance decreases.
The new full-scale current is not exactly twice the old one because the galvanometer branch current must still be included.
326. A galvanometer of resistance \(100\,\Omega\) reaches full-scale deflection at a current of \(1.0\,\text{mA}\).
It is converted into an ammeter using a shunt resistor of resistance \(0.100\,\Omega\). Initially, all connections have negligible resistance.
During use, a poor connection introduces an additional resistance of \(0.100\,\Omega\) in series with the shunt branch only. The moving-coil branch is unchanged.
Which statement correctly gives the original and modified full-scale ammeter ranges and assesses whether an externally imposed total current of \(0.750\,\text{A}\) exceeds the modified full-scale range?
ⓐ. Original \(1.001\,\text{A}\); modified \(2.001\,\text{A}\); the imposed current is within range.
ⓑ. Original \(1.001\,\text{A}\); modified \(0.501\,\text{A}\); the imposed current remains within range.
ⓒ. Original \(0.501\,\text{A}\); modified \(1.001\,\text{A}\); the imposed current is within range.
ⓓ. Original \(1.001\,\text{A}\); modified \(0.501\,\text{A}\); the imposed current exceeds the new full-scale range.
Correct Answer: Original \(1.001\,\text{A}\); modified \(0.501\,\text{A}\); the imposed current exceeds the new full-scale range.
Explanation: \(\textbf{Determine the moving-coil full-scale voltage:}\)
The galvanometer resistance is
\[
G=100\,\Omega
\]
Its full-scale current is
\[
I_g=1.0\times10^{-3}\,\text{A}
\]
Therefore,
\[
V_g=I_gG
\]
\[
V_g=(1.0\times10^{-3})(100)
\]
\[
V_g=0.100\,\text{V}
\]
The galvanometer reaches its safe full-scale deflection whenever this voltage is applied across its coil.
\(\textbf{Calculate the original ammeter range:}\)
Initially, the shunt resistance is
\[
S_1=0.100\,\Omega
\]
At full scale, the shunt current is
\[
I_{s1}=\frac{V_g}{S_1}
\]
\[
I_{s1}=\frac{0.100}{0.100}
\]
\[
I_{s1}=1.000\,\text{A}
\]
The total ammeter current is
\[
I_{A1}=I_g+I_{s1}
\]
\[
I_{A1}=0.001+1.000
\]
\[
I_{A1}=1.001\,\text{A}
\]
\(\textbf{Include the resistance of the defective connection:}\)
The added contact resistance is in series with the shunt branch.
Therefore, the effective shunt-branch resistance becomes
\[
S_2=0.100+0.100
\]
\[
S_2=0.200\,\Omega
\]
The galvanometer full-scale voltage remains \(0.100\,\text{V}\).
The new shunt current at that voltage is
\[
I_{s2}=\frac{0.100}{0.200}
\]
\[
I_{s2}=0.500\,\text{A}
\]
Consequently,
\[
I_{A2}=0.001+0.500
\]
\[
I_{A2}=0.501\,\text{A}
\]
\(\textbf{Evaluate the imposed current:}\)
The externally imposed total current is
\[
I_{\mathrm{test}}=0.750\,\text{A}
\]
Since
\[
0.750\gt 0.501
\]
the test current exceeds the modified instrument's full-scale range.
\(\textbf{Final answer:}\)
\[
\boxed{I_{A1}=1.001\,\text{A},\qquad
I_{A2}=0.501\,\text{A}}
\]
Increasing resistance in the shunt branch reduces the fraction of the total current that bypasses the galvanometer.
The safe full-scale range therefore decreases.
A current previously within the original range can become excessive after the connection deteriorates.
The added resistance must be treated as part of the shunt branch, not as resistance added in series with the entire ammeter.
327. A moving-coil galvanometer has resistance \(50\,\Omega\) and full-scale current \(2.0\,\text{mA}\). It is converted into a \(1.0\,\text{A}\) ammeter using a suitable low-resistance shunt connected directly across the moving coil.
Assume that, at full scale, all electrical power dissipated inside the instrument is dissipated in the galvanometer resistance and the shunt resistance.
What are the required shunt resistance and the ratio of power dissipated in the shunt to that dissipated in the moving coil at full scale?
ⓐ. \(\displaystyle S=\frac{50}{499}\,\Omega,\quad \frac{P_s}{P_g}=\frac1{499}\)
ⓑ. \(\displaystyle S=\frac{50}{499}\,\Omega,\quad \frac{P_s}{P_g}=499\)
ⓒ. \(\displaystyle S=\frac{50}{499}\,\Omega,\quad \frac{P_s}{P_g}=249001\)
ⓓ. \(\displaystyle S=\frac{50}{998}\,\Omega,\quad \frac{P_s}{P_g}=499\)
Correct Answer: \(\displaystyle S=\frac{50}{499}\,\Omega,\quad \frac{P_s}{P_g}=499\)
Explanation: \(\textbf{Determine the full-scale current in each branch:}\)
The galvanometer current at full scale is
\[
I_g=2.0\times10^{-3}\,\text{A}
\]
The complete ammeter current is
\[
I_A=1.0\,\text{A}
\]
The current through the shunt is therefore
\[
I_s=I_A-I_g
\]
\[
I_s=1.0-0.002
\]
\[
I_s=0.998\,\text{A}
\]
\(\textbf{Calculate the required shunt resistance:}\)
The shunt and moving coil have equal terminal voltages:
\[
I_gG=I_sS
\]
Thus,
\[
S=\frac{I_gG}{I_s}
\]
Substituting,
\[
S=\frac{(0.002)(50)}{0.998}
\]
\[
S=\frac{0.100}{0.998}
\]
\[
S=\frac{50}{499}\,\Omega
\]
\(\textbf{Determine the moving-coil power:}\)
The power dissipated in a resistor carrying current \(I\) is
\[
P=I^2R
\]
Therefore,
\[
P_g=I_g^2G
\]
\[
P_g=(0.002)^2(50)
\]
\[
P_g=2.0\times10^{-4}\,\text{W}
\]
\(\textbf{Determine the shunt power using the common voltage:}\)
The full-scale voltage across either parallel branch is
\[
V=I_gG
\]
\[
V=(0.002)(50)
\]
\[
V=0.100\,\text{V}
\]
The shunt power is
\[
P_s=VI_s
\]
\[
P_s=(0.100)(0.998)
\]
\[
P_s=0.0998\,\text{W}
\]
\(\textbf{Compare the dissipated powers:}\)
\[
\frac{P_s}{P_g}=\frac{0.0998}{2.0\times10^{-4}}
\]
\[
\frac{P_s}{P_g}=499
\]
An equivalent check follows from the fact that both parallel branches have the same voltage:
\[
\frac{P_s}{P_g}=\frac{VI_s}{VI_g}
\]
\[
\frac{P_s}{P_g}=\frac{0.998}{0.002}=499
\]
\(\textbf{Final answer:}\)
\[
\boxed{S=\frac{50}{499}\,\Omega,\qquad
\frac{P_s}{P_g}=499}
\]
The low-resistance shunt carries almost all the measured current.
Although its resistance is much smaller than that of the galvanometer, it dissipates much greater power at full scale.
The power ratio is determined by the current ratio because both branches have the same terminal voltage.
A practical shunt must therefore have an appropriate power rating as well as the required resistance.
328. A sensitive moving-coil galvanometer is converted into an ammeter by connecting a low-resistance shunt directly across its coil. The converted ammeter is intended for series connection in a circuit.
Two independent faults are considered.
Fault P: The shunt branch becomes open-circuited, leaving the galvanometer branch connected.
Fault Q: The shunt branch becomes an ideal short circuit across the galvanometer terminals.
Consider the following statements.
Statement I: Under Fault P, the galvanometer may carry a much greater fraction of the measured circuit current than intended and may be damaged.
Statement II: Under Fault Q, the potential difference across the galvanometer tends to zero, so its deflection tends to zero.
Statement III: Under Fault P, the original extended full-scale ammeter range remains unchanged because the galvanometer resistance has not changed.
Statement IV: Under Fault Q, the effective resistance of the instrument tends to zero, which can alter the current in the external circuit compared with its value before the fault.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: I, II and IV only
Explanation: In a properly shunted galvanometer, the measured current divides between the moving coil and a low-resistance parallel branch.
Only a small fraction passes through the sensitive moving coil.
The full-scale range of the converted ammeter depends on both the galvanometer resistance and the shunt resistance.
Under Fault P, the shunt branch is open.
The current can no longer bypass the galvanometer through that branch.
If the external circuit continues to drive a substantial current, the moving coil may receive far more than its safe full-scale current.
Statement I is correct.
The instrument no longer retains its intended extended range because the current-division mechanism has failed.
Statement III is therefore incorrect.
Under Fault Q, the galvanometer terminals are joined by an ideal zero-resistance path.
The potential difference across that path is zero.
Because the galvanometer is connected across the same terminals, its terminal voltage also tends to zero.
Its current and magnetic deflection consequently tend to zero.
Statement II is correct.
The ideal short-circuit branch also makes the effective resistance of the converted ammeter tend to zero.
This can reduce the resistance inserted into the external circuit.
For a voltage-driven external circuit, that reduction can change the total circuit current.
Statement IV is correct.
These two faults produce very different instrument behaviour.
An open shunt can subject the galvanometer to excessive current.
A shorted shunt can suppress the pointer deflection while still allowing current through the external circuit.
A near-zero pointer reading therefore does not always establish that the circuit current is zero.
Understanding both current division and external circuit loading is essential when interpreting a converted ammeter.
329. A positive test particle of charge \(+1.0\,\mu\text{C}\) moves in uniform electric and magnetic fields
\[
\vec E=(80\hat i+120\hat j)\,\text{N C}^{-1},\qquad
\vec B=B_0\hat k
\]
where \(B_0\gt 0\) is unknown. When its velocity is \(300\hat i\,\text{m s}^{-1}\), the measured electromagnetic force is
\[
\vec F=(80\hat i-30\hat j)\,\mu\text{N}
\]
In a second experiment, a particle having charge \(-2.0\,\mu\text{C}\) moves in the same fields. Which pair gives \(B_0\) and a velocity for which the second particle experiences zero electromagnetic force?
ⓐ. \(0.30\,\text{T}\) and \((240\hat i-160\hat j)\,\text{m s}^{-1}\)
ⓑ. \(0.50\,\text{T}\) and \((240\hat i-160\hat j)\,\text{m s}^{-1}\)
ⓒ. \(0.50\,\text{T}\) and \((-240\hat i+160\hat j)\,\text{m s}^{-1}\)
ⓓ. \(0.50\,\text{T}\) and \((160\hat i-240\hat j)\,\text{m s}^{-1}\)
Correct Answer: \(0.50\,\text{T}\) and \((240\hat i-160\hat j)\,\text{m s}^{-1}\)
Explanation: \(\textbf{Recover the magnetic field from the first force measurement:}\)
The electromagnetic force on a moving charge is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
For the first experiment,
\[
\vec v=300\hat i\,\text{m s}^{-1}
\]
Using \(\hat i\times\hat k=-\hat j\),
\[
\vec v\times\vec B=-300B_0\hat j
\]
Therefore,
\[
\frac{\vec F}{q}=80\hat i+(120-300B_0)\hat j
\]
The measured force and charge give
\[
\frac{\vec F}{q}=(80\hat i-30\hat j)\,\text{N C}^{-1}
\]
Equating the \(y\)-components,
\[
120-300B_0=-30
\]
\[
300B_0=150
\]
\[
B_0=0.50\,\text{T}
\]
\(\textbf{Determine the velocity required for force cancellation:}\)
Let the second particle's velocity be
\[
\vec v'=v_x\hat i+v_y\hat j
\]
For nonzero charge, zero electromagnetic force requires
\[
\vec E+\vec v'\times\vec B=\vec0
\]
With \(\vec B=0.50\hat k\),
\[
\vec v'\times\vec B
=0.50(v_y\hat i-v_x\hat j)
\]
Therefore,
\[
(80+0.50v_y)\hat i+(120-0.50v_x)\hat j=\vec0
\]
Both components must vanish:
\[
80+0.50v_y=0
\]
\[
v_y=-160\,\text{m s}^{-1}
\]
and
\[
120-0.50v_x=0
\]
\[
v_x=240\,\text{m s}^{-1}
\]
\(\textbf{Check the negative charge:}\)
For this velocity,
\[
\vec v'\times\vec B=-80\hat i-120\hat j
\]
It exactly cancels the electric field.
The expression inside the Lorentz-force brackets is zero, so multiplying it by a negative charge still gives zero force.
\(\textbf{Final answer:}\)
\[
\boxed{B_0=0.50\,\text{T},\qquad
\vec v'=(240\hat i-160\hat j)\,\text{m s}^{-1}}
\]
The first force measurement determines the unknown magnetic-field magnitude through its transverse component.
The second experiment requires simultaneous cancellation of two perpendicular force components.
The velocity required for cancellation does not depend on the sign or magnitude of the nonzero particle charge.
A negative charge reverses both electric and magnetic force contributions, preserving their cancellation.
330. Two particles have equal charge magnitudes \(q_0\gt 0\), but their charges are \(+q_0\) and \(-q_0\). Both initially enter uniform crossed fields with velocity \(v\hat i\), where
\[
\vec E=E_0\hat j,\qquad \vec B=B_0\hat k
\]
and \(E_0,B_0\gt 0\).
Consider two independent entry speeds: \(v_1=E_0/B_0\) and \(v_2=E_0/(2B_0)\). The particles enter separately at the same point, and only electromagnetic forces act.
Consider the following statements.
Statement I: At speed \(v_1\), both particles initially experience zero electromagnetic force.
Statement II: At speed \(v_2\), the initial transverse forces on the two particles point in opposite directions.
Statement III: At speed \(v_2\), both particles initially have zero instantaneous rate of change of kinetic energy even though their resultant forces are nonzero.
Statement IV: At speed \(v_2\), the magnetic force must do work on the particles because their trajectories begin to curve.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. I, III and IV only
ⓓ. II, III and IV only
Correct Answer: I, II and III only
Explanation: The electromagnetic force is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
For entry velocity along positive \(x\) and magnetic field along positive \(z\),
\[
\vec v\times\vec B=-vB_0\hat j
\]
Therefore, the total force is
\[
\vec F=q(E_0-vB_0)\hat j
\]
At speed \(v_1=E_0/B_0\), the expression inside the brackets vanishes.
The force is consequently zero for either sign of charge.
Statement I is correct.
At speed \(v_2=E_0/(2B_0)\), the expression becomes
\[
E_0-v_2B_0=\frac{E_0}{2}
\]
The positive particle therefore experiences force along positive \(y\), while the negative particle experiences force along negative \(y\).
Statement II is correct.
The instantaneous rate of change of kinetic energy is
\[
\frac{dK}{dt}=\vec F\cdot\vec v=q\vec E\cdot\vec v
\]
At entry, the velocity is along \(x\) and the electric field is along \(y\).
Their scalar product is zero, so the instantaneous power is zero for both particles.
Statement III is correct.
As their trajectories begin to curve, their velocities can develop components along the respective electric-force directions.
The electric field can then change their kinetic energies.
However, magnetic force remains perpendicular to instantaneous velocity and performs no work at any point.
Statement IV is incorrect.
A nonzero force need not produce an instantaneous change in speed; it can initially change only the direction of velocity.
The distinction between force, power and trajectory curvature is essential in combined electric and magnetic fields.
331. A particle of nonzero charge \(q\) is placed in uniform fields
\[
\vec E=E_0(3\hat i+4\hat k),\qquad
\vec B=B_0\hat k
\]
where \(E_0,B_0\gt 0\).
Its velocity may be chosen freely in three dimensions. Which statement correctly gives the smallest possible magnitude of its resultant electromagnetic force and the condition on its velocity for obtaining this minimum?
ⓐ. The minimum is zero when \(v_y=-3E_0/B_0\), regardless of \(v_z\).
ⓑ. The minimum is \(3|q|E_0\) when \(v_x=0\) and \(v_y=-4E_0/B_0\).
ⓒ. The minimum is \(4|q|E_0\) when \(v_x=0\), \(v_y=-3E_0/B_0\), and \(v_z\) is arbitrary.
ⓓ. The minimum is \(5|q|E_0\) because electric and magnetic forces are always perpendicular.
Correct Answer: The minimum is \(4|q|E_0\) when \(v_x=0\), \(v_y=-3E_0/B_0\), and \(v_z\) is arbitrary.
Explanation: \(\textbf{Separate electric-field components parallel and perpendicular to the magnetic field:}\)
The electric field is
\[
\vec E=3E_0\hat i+4E_0\hat k
\]
The magnetic field points along positive \(z\).
The magnetic Lorentz-force contribution is perpendicular to the magnetic field.
Therefore, no choice of velocity can produce a magnetic force component along \(z\).
The electric force component \(4qE_0\hat k\) cannot be cancelled by magnetic force.
\(\textbf{Express the complete Lorentz force:}\)
For a general velocity,
\[
\vec v=v_x\hat i+v_y\hat j+v_z\hat k
\]
the magnetic cross product is
\[
\vec v\times\vec B
=B_0(v_y\hat i-v_x\hat j)
\]
Thus,
\[
\vec F=q[(3E_0+B_0v_y)\hat i-B_0v_x\hat j+4E_0\hat k]
\]
\(\textbf{Find the conditions giving minimum force magnitude:}\)
The three Cartesian components are mutually perpendicular.
Hence,
\[
|\vec F|^2=q^2[(3E_0+B_0v_y)^2+(B_0v_x)^2+(4E_0)^2]
\]
The first two squared terms can be made zero.
This requires
\[
3E_0+B_0v_y=0
\]
\[
v_y=-\frac{3E_0}{B_0}
\]
and
\[
v_x=0
\]
The component \(v_z\) has no effect on the magnetic force because it is parallel to \(\vec B\).
Therefore, \(v_z\) may have any value.
\(\textbf{Determine the unavoidable residual force:}\)
Under these conditions,
\[
\vec F=4qE_0\hat k
\]
The smallest possible magnitude is
\[
F_{\min}=4|q|E_0
\]
\(\textbf{Final answer:}\)
\[
\boxed{F_{\min}=4|q|E_0,\qquad
v_x=0,\quad v_y=-\frac{3E_0}{B_0},\quad v_z\ \text{arbitrary}}
\]
Complete electromagnetic-force cancellation is impossible when the electric field has a nonzero component parallel to the magnetic field.
The familiar speed-selection relation \(v=E/B\) applies only when the required electric and magnetic forces can oppose each other vectorially.
Here, only the transverse electric contribution can be cancelled.
The parallel electric contribution remains regardless of the chosen velocity.
332. A beam of charged particles travels along positive \(x\) through uniform crossed fields. The electric field is along positive \(y\), and the magnetic field is along positive \(z\). The particles enter with velocities perpendicular to both fields.
A calibration graph has horizontal axis \(v_x\), the particle's signed \(x\)-component of velocity in \(\text{m s}^{-1}\), and vertical axis \(F_y/q\) in \(\text{N C}^{-1}\), where \(F_y\) is the signed \(y\)-component of total electromagnetic force and \(q\) is the signed nonzero charge. The graph is a straight line passing through \((0,900)\) and \((3000,0)\). The graph is obtained using entry velocities directed along positive \(x\).
A positive ion and a negative ion, each having charge magnitude \(q_0\), separately enter at \(v_x=2000\,\text{m s}^{-1}\).
Which option correctly gives the field magnitudes, the undeflected entry speed, and the initial force directions on the two ions?
ⓐ. \(E=900\,\text{N C}^{-1}\), \(B=0.30\,\text{T}\), undeflected speed \(3000\,\text{m s}^{-1}\); positive ion towards \(+y\), negative ion towards \(-y\).
ⓑ. \(E=900\,\text{N C}^{-1}\), \(B=0.30\,\text{T}\), undeflected speed \(3000\,\text{m s}^{-1}\); both ions towards \(+y\).
ⓒ. \(E=300\,\text{N C}^{-1}\), \(B=0.30\,\text{T}\), undeflected speed \(1000\,\text{m s}^{-1}\); force directions opposite.
ⓓ. \(E=900\,\text{N C}^{-1}\), \(B=3.0\,\text{T}\), undeflected speed \(300\,\text{m s}^{-1}\); positive ion towards \(-y\), negative ion towards \(+y\).
Correct Answer: \(E=900\,\text{N C}^{-1}\), \(B=0.30\,\text{T}\), undeflected speed \(3000\,\text{m s}^{-1}\); positive ion towards \(+y\), negative ion towards \(-y\).
Explanation: \(\textbf{Interpret the signed force calibration:}\)
For velocity along positive \(x\),
\[
\vec v\times\vec B=-v_xB\hat j
\]
The electric force is along positive \(y\) for positive charge.
Therefore,
\[
F_y=q(E-v_xB)
\]
Dividing by the signed charge,
\[
\frac{F_y}{q}=E-Bv_x
\]
This is a straight-line relation with intercept \(E\) and slope \(-B\).
\(\textbf{Recover the field magnitudes:}\)
The vertical intercept is
\[
E=900\,\text{N C}^{-1}
\]
The graph slope is
\[
s=\frac{0-900}{3000-0}
\]
\[
s=-0.30\,\text{T}
\]
Hence,
\[
B=0.30\,\text{T}
\]
\(\textbf{Determine the undeflected speed:}\)
For zero force,
\[
E-vB=0
\]
Thus,
\[
v_{\mathrm{sel}}=\frac EB
\]
\[
v_{\mathrm{sel}}=\frac{900}{0.30}
\]
\[
v_{\mathrm{sel}}=3000\,\text{m s}^{-1}
\]
\(\textbf{Determine the force directions at the test speed:}\)
At
\[
v_x=2000\,\text{m s}^{-1}
\]
the force per signed unit charge is
\[
\frac{F_y}{q}=900-(0.30)(2000)
\]
\[
\frac{F_y}{q}=300\,\text{N C}^{-1}
\]
For the positive ion,
\[
\vec F_+=+300q_0\hat j
\]
For the negative ion,
\[
\vec F_-=-300q_0\hat j
\]
The forces have equal magnitudes but opposite directions.
\(\textbf{Final answer:}\)
\[
\boxed{E=900\,\text{N C}^{-1},\quad
B=0.30\,\text{T},\quad
v_{\mathrm{sel}}=3000\,\text{m s}^{-1}}
\]
The graph is defined using \(F_y/q\), so the signed charge has already been factored out.
Its slope determines the magnetic-field magnitude, whereas its intercept determines the electric-field magnitude.
A positive value of \(F_y/q\) does not mean every particle experiences a force along positive \(y\).
The actual direction must still account for the particle's charge sign.
333. A positively charged ion starts from rest, is accelerated through a potential difference \(V\), and then enters a velocity selector along positive \(x\). The selector contains uniform fields
\[
\vec E=2.0\times10^4\hat j\,\text{N C}^{-1},\qquad
\vec B_1=0.20\hat k\,\text{T}
\]
Only undeflected ions pass through its exit slit.
The transmitted ion immediately enters a second region containing a uniform magnetic field \(0.50\hat k\,\text{T}\), with negligible electric field. Its circular trajectory there has measured radius \(0.040\,\text{m}\).
Assume nonrelativistic motion and negligible energy losses.
Which pair correctly gives the ion's charge-to-mass ratio and the accelerating potential difference?
ⓐ. \(\frac qm=2.5\times10^6\,\text{C kg}^{-1}\), \(V=2.0\,\text{kV}\).
ⓑ. \(\frac qm=5.0\times10^6\,\text{C kg}^{-1}\), \(V=2.0\,\text{kV}\).
ⓒ. \(\frac qm=1.0\times10^7\,\text{C kg}^{-1}\), \(V=0.50\,\text{kV}\).
ⓓ. \(\frac qm=5.0\times10^6\,\text{C kg}^{-1}\), \(V=1.0\,\text{kV}\).
Correct Answer: \(\frac qm=5.0\times10^6\,\text{C kg}^{-1}\), \(V=1.0\,\text{kV}\).
Explanation: \(\textbf{Determine the speed selected by crossed fields:}\)
The ion enters with velocity along positive \(x\).
Its magnetic force points towards negative \(y\), while its electric force points towards positive \(y\).
For undeflected transmission,
\[
qE=qvB_1
\]
Cancelling the nonzero charge,
\[
v=\frac{E}{B_1}
\]
Substituting,
\[
v=\frac{2.0\times10^4}{0.20}
\]
\[
v=1.0\times10^5\,\text{m s}^{-1}
\]
\(\textbf{Use the circular path to determine the charge-to-mass ratio:}\)
In the second magnetic field, the magnetic force provides centripetal force:
\[
qvB_2=\frac{mv^2}{r}
\]
Rearranging,
\[
\frac qm=\frac{v}{B_2r}
\]
Substitute the measured curvature radius:
\[
\frac qm=\frac{1.0\times10^5}{(0.50)(0.040)}
\]
\[
\frac qm=\frac{1.0\times10^5}{0.020}
\]
\[
\frac qm=5.0\times10^6\,\text{C kg}^{-1}
\]
\(\textbf{Recover the accelerating potential:}\)
The ion starts from rest.
Its electrical energy gain becomes kinetic energy:
\[
qV=\frac12mv^2
\]
Therefore,
\[
V=\frac{v^2}{2(q/m)}
\]
Substituting,
\[
V=\frac{(1.0\times10^5)^2}{2(5.0\times10^6)}
\]
\[
V=\frac{1.0\times10^{10}}{1.0\times10^7}
\]
\[
V=1.0\times10^3\,\text{V}
\]
\[
V=1.0\,\text{kV}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\frac qm=5.0\times10^6\,\text{C kg}^{-1},\qquad
V=1.0\,\text{kV}}
\]
The selector determines the transmitted speed without requiring knowledge of the ion's mass or charge.
The curvature in the second magnetic field supplies the charge-to-mass ratio.
The accelerating potential is then recovered from the kinetic-energy gain.
All three relations are needed; the velocity-selector condition alone cannot determine the ion's charge-to-mass ratio.
334. Two particles of equal mass carry charges \(+q_0\) and \(-q_0\), where \(q_0\gt 0\). Both initially move with velocity \((E_0/B_0)\hat i\) in uniform fields
\[
\vec E=E_0\hat j,\qquad
\vec B=B_0\hat k
\]
with \(E_0,B_0\gt 0\).
In separate trials, the magnetic field is reversed to \(-B_0\hat k\) immediately before each particle enters. The electric field and entry velocity remain unchanged.
Let \(h\gt 0\) be a sufficiently small transverse distance that each particle reaches the plane \(y=+h\) or \(y=-h\), respectively, before leaving the field region.
Which statement correctly gives their initial transverse forces and their kinetic-energy changes upon reaching these respective planes?
ⓐ. Initial forces are equal and along \(+y\); both kinetic energies increase by \(q_0E_0h\).
ⓑ. Initial forces are \(+2q_0E_0\hat j\) and \(-2q_0E_0\hat j\); both kinetic energies increase by \(q_0E_0h\).
ⓒ. Initial forces are \(+2q_0E_0\hat j\) and \(-2q_0E_0\hat j\); the positive particle gains \(q_0E_0h\), while the negative particle loses the same energy.
ⓓ. Both initial forces vanish, but their kinetic energies increase by \(2q_0E_0h\).
Correct Answer: Initial forces are \(+2q_0E_0\hat j\) and \(-2q_0E_0\hat j\); both kinetic energies increase by \(q_0E_0h\).
Explanation: \(\textbf{Apply magnetic-field reversal to the Lorentz force:}\)
The entry velocity is
\[
\vec v=\frac{E_0}{B_0}\hat i
\]
After reversal,
\[
\vec B'=-B_0\hat k
\]
Therefore,
\[
\vec v\times\vec B'
=\frac{E_0}{B_0}\hat i\times(-B_0\hat k)
\]
Using \(\hat i\times\hat k=-\hat j\),
\[
\vec v\times\vec B'=+E_0\hat j
\]
The electric-field contribution is also \(+E_0\hat j\).
Thus,
\[
\vec E+\vec v\times\vec B'=2E_0\hat j
\]
\(\textbf{Determine the two initial forces:}\)
For the positive particle,
\[
\vec F_+=+2q_0E_0\hat j
\]
For the negative particle,
\[
\vec F_-=-2q_0E_0\hat j
\]
They initially deflect towards opposite sides of the entry line.
\(\textbf{Calculate the energy change from electric work:}\)
Magnetic force performs no work because it is perpendicular to instantaneous velocity.
The work done by the uniform electric field is
\[
W_E=q\vec E\cdot\Delta\vec r
\]
Only the transverse displacement matters because the electric field is along \(y\).
For the positive particle, the relevant displacement is \(\Delta y=+h\):
\[
\Delta K_+=(+q_0)E_0(+h)
\]
\[
\Delta K_+=q_0E_0h
\]
For the negative particle, the relevant displacement is \(\Delta y=-h\):
\[
\Delta K_-=(-q_0)E_0(-h)
\]
\[
\Delta K_-=q_0E_0h
\]
Both kinetic-energy changes are positive.
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_+=+2q_0E_0\hat j,\quad
\vec F_-=-2q_0E_0\hat j,\quad
\Delta K_+=\Delta K_-=q_0E_0h}
\]
The opposite charge signs reverse the initial electromagnetic-force directions.
They also reverse the directions in which electric potential energy decreases.
Consequently, both particles gain kinetic energy while moving towards opposite transverse sides.
The magnetic field determines the trajectory but contributes no work to either energy change.
335. A small charged dust grain has mass \(1.0\times10^{-6}\,\text{kg}\) and positive charge \(2.0\,\mu\text{C}\). It moves horizontally with velocity \(100\hat i\,\text{m s}^{-1}\) through uniform fields
\[
\vec E=E_0\hat j,\qquad
\vec B=0.20\hat k\,\text{T}
\]
where positive \(y\) is vertically upward. Gravity acts vertically downward with \(g=10\,\text{m s}^{-2}\).
The electric-field magnitude \(E_0\) is adjusted so that the grain initially has zero resultant force.
In a second trial, an otherwise identical grain with charge \(-2.0\,\mu\text{C}\) enters with the same velocity. Both fields remain unchanged.
What are \(E_0\) and the initial acceleration of the negatively charged grain?
ⓐ. \(E_0=15\,\text{N C}^{-1}\); acceleration \(10\,\text{m s}^{-2}\) downward.
ⓑ. \(E_0=25\,\text{N C}^{-1}\); acceleration \(10\,\text{m s}^{-2}\) upward.
ⓒ. \(E_0=25\,\text{N C}^{-1}\); acceleration \(20\,\text{m s}^{-2}\) downward.
ⓓ. \(E_0=20\,\text{N C}^{-1}\); acceleration \(20\,\text{m s}^{-2}\) downward.
Correct Answer: \(E_0=25\,\text{N C}^{-1}\); acceleration \(20\,\text{m s}^{-2}\) downward.
Explanation: \(\textbf{Identify the directions of the forces on the positive grain:}\)
The positive grain moves along positive \(x\).
The magnetic field points along positive \(z\).
Therefore,
\[
\vec v\times\vec B=-vB\hat j
\]
Its magnetic force acts downward.
Gravity also acts downward, while the electric force on the positive grain acts upward.
For zero resultant force, the upward electric force must balance both downward contributions.
\(\textbf{Determine the necessary electric field:}\)
The equilibrium condition is
\[
qE_0=qvB+mg
\]
Dividing by \(q\),
\[
E_0=vB+\frac{mg}{q}
\]
Substituting,
\[
E_0=(100)(0.20)
+\frac{(1.0\times10^{-6})(10)}{2.0\times10^{-6}}
\]
\[
E_0=20+5
\]
\[
E_0=25\,\text{N C}^{-1}
\]
\(\textbf{Evaluate the electromagnetic force on the negative grain:}\)
The second grain has charge
\[
q'=-2.0\times10^{-6}\,\text{C}
\]
Its entry velocity and both fields are unchanged.
The electric and magnetic contributions inside the Lorentz-force brackets are
\[
\vec E+\vec v\times\vec B=(25-20)\hat j
\]
\[
\vec E+\vec v\times\vec B=5\hat j\,\text{N C}^{-1}
\]
Multiplying by the negative charge,
\[
\vec F_{\mathrm{em}}=(-2.0\times10^{-6})(5)\hat j
\]
\[
\vec F_{\mathrm{em}}=-1.0\times10^{-5}\hat j\,\text{N}
\]
\(\textbf{Include gravity and calculate acceleration:}\)
The weight of the second grain is
\[
\vec W=-mg\hat j
\]
\[
\vec W=-1.0\times10^{-5}\hat j\,\text{N}
\]
Therefore,
\[
\vec F_{\mathrm{net}}
=(-1.0\times10^{-5}-1.0\times10^{-5})\hat j
\]
\[
\vec F_{\mathrm{net}}=-2.0\times10^{-5}\hat j\,\text{N}
\]
Newton's second law gives
\[
\vec a=\frac{\vec F_{\mathrm{net}}}{m}
\]
\[
\vec a=-20\hat j\,\text{m s}^{-2}
\]
\(\textbf{Final answer:}\)
\[
\boxed{E_0=25\,\text{N C}^{-1},\qquad
\vec a=-20\hat j\,\text{m s}^{-2}}
\]
The original electric field balances magnetic force and weight together, not magnetic force alone.
Changing the charge sign reverses both electromagnetic contributions but does not reverse gravity.
The previous equilibrium is therefore destroyed.
The negative grain initially accelerates downward at twice the gravitational acceleration.
336. A positively charged particle of charge \(5.0\,\text{nC}\) is moving in uniform fields
\[
\vec E=400\hat j\,\text{N C}^{-1},\qquad
\vec B=0.20\hat k\,\text{T}
\]
Initially, it moves along positive \(x\) with the speed required for zero electromagnetic force.
In a separate trial, the particle is given the same speed but its velocity is directed along positive \(y\), without changing either field.
What are the resultant electromagnetic-force vector and the instantaneous rate of change of kinetic energy in the second trial?
ⓐ. \((2.0\hat i+2.0\hat j)\,\mu\text{N}\); \(4.0\,\text{mW}\).
ⓑ. \((-2.0\hat i+2.0\hat j)\,\mu\text{N}\); zero.
ⓒ. \((2.0\hat i-2.0\hat j)\,\mu\text{N}\); \(-4.0\,\text{mW}\).
ⓓ. \((2.0\hat i+2.0\hat j)\,\mu\text{N}\); zero.
Correct Answer: \((2.0\hat i+2.0\hat j)\,\mu\text{N}\); \(4.0\,\text{mW}\).
Explanation: \(\textbf{Determine the original undeflected speed:}\)
For positive-\(x\) entry,
\[
\vec v\times\vec B=-vB\hat j
\]
The magnetic and electric forces oppose each other.
Zero electromagnetic force requires
\[
E=vB
\]
Therefore,
\[
v=\frac EB
\]
\[
v=\frac{400}{0.20}
\]
\[
v=2000\,\text{m s}^{-1}
\]
\(\textbf{Calculate the magnetic force after redirecting velocity:}\)
In the second trial,
\[
\vec v'=2000\hat j\,\text{m s}^{-1}
\]
The magnetic cross product is
\[
\vec v'\times\vec B
=(2000\hat j)\times(0.20\hat k)
\]
Using \(\hat j\times\hat k=\hat i\),
\[
\vec v'\times\vec B=400\hat i\,\text{N C}^{-1}
\]
The electric-field contribution remains \(400\hat j\,\text{N C}^{-1}\).
\(\textbf{Determine the complete electromagnetic force:}\)
\[
\vec F'=q(\vec E+\vec v'\times\vec B)
\]
\[
\vec F'=(5.0\times10^{-9})(400\hat i+400\hat j)
\]
\[
\vec F'=(2.0\hat i+2.0\hat j)\times10^{-6}\,\text{N}
\]
\(\textbf{Determine the instantaneous power:}\)
The magnetic force is perpendicular to velocity and performs no work.
Thus,
\[
P=\vec F'\cdot\vec v'=q\vec E\cdot\vec v'
\]
Substituting,
\[
P=(5.0\times10^{-9})(400)(2000)
\]
\[
P=4.0\times10^{-3}\,\text{W}
\]
\[
P=4.0\,\text{mW}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F'=(2.0\hat i+2.0\hat j)\,\mu\text{N},\qquad
P=4.0\,\text{mW}}
\]
The original velocity gives cancellation because the magnetic force opposes the electric force.
Redirecting the velocity changes the magnetic-force direction while leaving its magnitude unchanged.
The electric and magnetic forces then act perpendicularly.
The electric force also becomes parallel to the particle's velocity, so it immediately increases kinetic energy.
A particle's speed alone cannot establish electromagnetic-force cancellation; its direction is equally important.
337. A nonzero charged particle moves in uniform fields
\[
\vec E=E_0\hat i,\qquad \vec B=B_0\hat k
\]
where \(E_0,B_0\gt 0\). Its velocity is not required to remain in the \(xy\)-plane.
Consider the following statements about velocities producing zero electromagnetic force.
Statement I: Every undeflected particle must have a total speed exactly equal to \(E_0/B_0\).
Statement II: Zero electromagnetic force requires \(v_x=0\) and \(v_y=-E_0/B_0\).
Statement III: A velocity component parallel to the magnetic field may be added without destroying force cancellation.
Statement IV: The cancellation condition is the same for positive and negative nonzero charges.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, III and IV only
ⓒ. II, III and IV only
ⓓ. I, II and IV only
Correct Answer: II, III and IV only
Explanation: The Lorentz-force relation is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
For a nonzero charge, zero force requires
\[
\vec E+\vec v\times\vec B=\vec0
\]
Write the general particle velocity as
\[
\vec v=v_x\hat i+v_y\hat j+v_z\hat k
\]
The magnetic cross product is
\[
\vec v\times\vec B=B_0(v_y\hat i-v_x\hat j)
\]
Therefore, the cancellation condition becomes
\[
(E_0+B_0v_y)\hat i-B_0v_x\hat j=\vec0
\]
Equating components gives
\[
v_x=0,\qquad v_y=-\frac{E_0}{B_0}
\]
Statement II is correct.
The velocity component \(v_z\) does not appear because it is parallel to the magnetic field.
Adding or changing that component produces no additional magnetic force.
Statement III is correct.
The total particle speed is
\[
v=\sqrt{\left(\frac{E_0}{B_0}\right)^2+v_z^2}
\]
It equals \(E_0/B_0\) only when \(v_z=0\).
Therefore, Statement I is incorrect.
Changing the charge sign reverses both electric and magnetic force contributions.
Their cancellation remains valid because the common charge factor does not affect the zero-force condition.
Statement IV is correct.
The usual relation \(v=E/B\) gives the total speed only when the velocity has no component parallel to the magnetic field.
More generally, it fixes the relevant perpendicular velocity component.
A particle can consequently travel undeflected at a greater total speed when it also has motion along the magnetic-field direction.
338. Two types of nonrelativistic ions are transmitted undeflected through the same crossed-field velocity selector. Both enter along positive \(x\), and the selector fields are
\[
\vec E=E_0\hat j,\qquad \vec B_1=B_0\hat k
\]
where \(E_0,B_0\gt 0\).
Ion P has mass \(m\) and charge \(+q\). Ion Q has mass \(4m\) and charge \(-2q\), where \(q\gt 0\). Both leave the selector with the selected velocity and enter a second region containing only a uniform magnetic field \(B_2\hat k\).
The ions enter the second region at the origin with velocity along positive \(x\). The magnetic-only region occupies the half-plane \(x\geq0\). Each ion follows its own circular path until it first returns to the boundary \(x=0\) after half a revolution. Let \(r=mE_0/(qB_0B_2)\).
At which signed \(y\)-coordinates do the ions first return to the boundary, and what is their separation there?
ⓐ. P at \(-2r\), Q at \(+2r\); separation \(4r\).
ⓑ. P at \(+2r\), Q at \(-4r\); separation \(6r\).
ⓒ. P at \(-2r\), Q at \(-4r\); separation \(2r\).
ⓓ. P at \(-2r\), Q at \(+4r\); separation \(6r\).
Correct Answer: P at \(-2r\), Q at \(+4r\); separation \(6r\).
Explanation: \(\textbf{Determine the common velocity selected by the first region:}\)
For positive-\(x\) entry, the magnetic field along positive \(z\) produces a cross product along negative \(y\).
The electric field points along positive \(y\).
Force cancellation requires
\[
E_0=vB_0
\]
Therefore,
\[
v=\frac{E_0}{B_0}
\]
This condition is independent of ion mass and charge sign.
Both ions can consequently leave the selector with the same velocity.
\(\textbf{Calculate the magnetic-only orbit radius of ion P:}\)
In the second region,
\[
r_P=\frac{mv}{qB_2}
\]
Substituting the selected speed,
\[
r_P=\frac{mE_0}{qB_0B_2}
\]
Hence,
\[
r_P=r
\]
\(\textbf{Determine the radius of ion Q:}\)
Ion Q has mass \(4m\) and charge magnitude \(2q\).
Therefore,
\[
r_Q=\frac{4mv}{2qB_2}
\]
\[
r_Q=2r
\]
\(\textbf{Determine the signed displacement of each ion:}\)
For ion P, the initial magnetic force is
\[
\vec F_P=q(v\hat i\times B_2\hat k)
\]
It points along negative \(y\).
Thus, P's circular path has its centre below the entry point.
After half a revolution, its transverse displacement equals one negative diameter:
\[
y_P=-2r_P
\]
\[
y_P=-2r
\]
Ion Q has negative charge, so its initial magnetic force points along positive \(y\).
Its circular centre is above the entry point.
After half a revolution,
\[
y_Q=+2r_Q
\]
\[
y_Q=+4r
\]
\(\textbf{Determine the separation between the two return points:}\)
\[
\Delta y=y_Q-y_P
\]
\[
\Delta y=4r-(-2r)
\]
\[
\Delta y=6r
\]
\(\textbf{Final answer:}\)
\[
\boxed{y_P=-2r,\qquad y_Q=+4r,\qquad\Delta y=6r}
\]
Both ions pass the selector at the same speed despite their different masses and opposite charge signs.
In the magnetic-only region, their orbit radii depend on their separate mass-to-charge-magnitude ratios.
Their opposite charge signs also make them turn in opposite directions.
The detector separation therefore contains contributions from both circular diameters rather than their difference.
339. A positive ion having charge-to-mass ratio
\[
\frac qm=2.0\times10^7\,\text{C kg}^{-1}
\]
enters a region of uniform fields with initial velocity
\[
\vec v_0=3.0\times10^5\hat i\,\text{m s}^{-1}
\]
The electric field is
\[
\vec E=4.0\times10^3\hat i\,\text{N C}^{-1}
\]
and the magnetic field is
\[
\vec B=0.010\hat k\,\text{T}
\]
In Trial P, the ion is observed when it first crosses the plane \(x=1.0\,\text{m}\).
In Trial Q, the experiment is repeated from the same initial position and velocity, but the magnetic field is reversed to \(-0.010\hat k\,\text{T}\). The ion again crosses the plane \(x=1.0\,\text{m}\).
The ion's \(y\)-coordinates at the two crossings need not be equal. Neglect relativistic effects and radiation losses.
What are the ion speeds at the two crossings?
ⓐ. \(5.0\times10^5\,\text{m s}^{-1}\) in both trials.
ⓑ. \(5.0\times10^5\,\text{m s}^{-1}\) in P and \(3.0\times10^5\,\text{m s}^{-1}\) in Q.
ⓒ. \(4.0\times10^5\,\text{m s}^{-1}\) in both trials.
ⓓ. \(5.0\times10^5\,\text{m s}^{-1}\) in P and \(1.0\times10^5\,\text{m s}^{-1}\) in Q.
Correct Answer: \(5.0\times10^5\,\text{m s}^{-1}\) in both trials.
Explanation: \(\textbf{Identify the force responsible for changing kinetic energy:}\)
The total electromagnetic force is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
The magnetic contribution is perpendicular to instantaneous velocity.
Therefore,
\[
\vec F_B\cdot\vec v=0
\]
Only the electric field changes kinetic energy.
\(\textbf{Relate electric work to displacement:}\)
For a uniform electric field,
\[
W_E=q\vec E\cdot\Delta\vec r
\]
The field is along positive \(x\).
The ion moves from \(x=0\) to the plane \(x=1.0\,\text{m}\).
Therefore,
\[
W_E=qE\Delta x
\]
This work is independent of the transverse displacement and the shape of the trajectory.
\(\textbf{Apply the work–energy theorem:}\)
\[
K_f-K_i=W_E
\]
Thus,
\[
\frac12mv_f^2-\frac12mv_0^2=qE\Delta x
\]
Multiplying by \(2/m\),
\[
v_f^2-v_0^2=2\frac qmE\Delta x
\]
Therefore,
\[
v_f^2=v_0^2+2\frac qmE\Delta x
\]
\(\textbf{Substitute the given values:}\)
\[
v_f^2=(3.0\times10^5)^2
+2(2.0\times10^7)(4.0\times10^3)(1.0)
\]
\[
v_f^2=9.0\times10^{10}+1.6\times10^{11}
\]
\[
v_f^2=2.5\times10^{11}\,\text{m}^2\text{s}^{-2}
\]
Hence,
\[
v_f=5.0\times10^5\,\text{m s}^{-1}
\]
\(\textbf{Evaluate the magnetic-field reversal:}\)
Reversing the magnetic field changes the magnetic-force direction.
It can therefore alter the ion's trajectory and the \(y\)-coordinate of the crossing.
However, the electric field and the displacement along its direction are identical in the two trials.
The electric work is consequently the same.
\(\textbf{Final answer:}\)
\[
\boxed{v_P=v_Q=5.0\times10^5\,\text{m s}^{-1}}
\]
Two trajectories need not have the same shape or transverse endpoint to produce the same change in kinetic energy.
For a uniform electric field along \(x\), electric work depends only on the displacement along \(x\).
The magnetic field can redirect the ion but cannot change the work–energy result.
This distinction remains valid even when the magnetic-force directions in the two trials are opposite.
340. A positively charged particle has a known charge-to-mass ratio
\[
\frac qm=2.0\times10^7\,\text{C kg}^{-1}
\]
It is tested in uniform fields
\[
\vec E=E_0\hat j,\qquad\vec B=B_0\hat k
\]
where \(E_0,B_0\gt 0\) are unknown.
In Trial P, the particle is momentarily at rest, and its measured acceleration is
\[
\vec a_P=+2.0\times10^8\hat j\,\text{m s}^{-2}
\]
In Trial Q, the particle moves with instantaneous velocity \(40\hat i\,\text{m s}^{-1}\), and its measured acceleration is
\[
\vec a_Q=-6.0\times10^8\hat j\,\text{m s}^{-2}
\]
What are \(E_0\), \(B_0\), and the positive-\(x\) speed for which the electromagnetic force would vanish?
ⓐ. \(E_0=10\,\text{N C}^{-1}\), \(B_0=0.50\,\text{T}\), speed \(20\,\text{m s}^{-1}\).
ⓑ. \(E_0=20\,\text{N C}^{-1}\), \(B_0=1.0\,\text{T}\), speed \(20\,\text{m s}^{-1}\).
ⓒ. \(E_0=10\,\text{N C}^{-1}\), \(B_0=1.0\,\text{T}\), speed \(40\,\text{m s}^{-1}\).
ⓓ. \(E_0=10\,\text{N C}^{-1}\), \(B_0=1.0\,\text{T}\), speed \(10\,\text{m s}^{-1}\).
Correct Answer: \(E_0=10\,\text{N C}^{-1}\), \(B_0=1.0\,\text{T}\), speed \(10\,\text{m s}^{-1}\).
Explanation: \(\textbf{Use the stationary-particle trial to isolate electric force:}\)
For a charged particle,
\[
m\vec a=q(\vec E+\vec v\times\vec B)
\]
In Trial P, the instantaneous velocity is zero.
Therefore, the magnetic-force contribution vanishes:
\[
\vec v\times\vec B=\vec0
\]
Hence,
\[
\vec a_P=\frac qm\vec E
\]
The measured acceleration gives
\[
2.0\times10^8=(2.0\times10^7)E_0
\]
Thus,
\[
E_0=10\,\text{N C}^{-1}
\]
\(\textbf{Use the moving-particle trial to recover magnetic field:}\)
In Trial Q,
\[
\vec v=40\hat i\,\text{m s}^{-1}
\]
and
\[
\vec B=B_0\hat k
\]
The magnetic cross product is
\[
\vec v\times\vec B=-40B_0\hat j
\]
Therefore,
\[
\vec a_Q=\frac qm(E_0-40B_0)\hat j
\]
Substituting the measured acceleration,
\[
-6.0\times10^8
=(2.0\times10^7)(10-40B_0)
\]
Dividing by \(2.0\times10^7\),
\[
-30=10-40B_0
\]
\[
40B_0=40
\]
\[
B_0=1.0\,\text{T}
\]
\(\textbf{Determine the undeflected entry speed:}\)
For velocity \(v\hat i\), zero force requires
\[
E_0-vB_0=0
\]
Thus,
\[
v_{\mathrm{sel}}=\frac{E_0}{B_0}
\]
\[
v_{\mathrm{sel}}=\frac{10}{1.0}
\]
\[
v_{\mathrm{sel}}=10\,\text{m s}^{-1}
\]
\(\textbf{Final answer:}\)
\[
\boxed{E_0=10\,\text{N C}^{-1},\quad
B_0=1.0\,\text{T},\quad
v_{\mathrm{sel}}=10\,\text{m s}^{-1}}
\]
A stationary charged particle responds to the electric field but not to magnetic force.
The first acceleration measurement therefore isolates the electric-field magnitude.
The moving-particle measurement then reveals the opposing magnetic contribution.
Combining both measurements determines the field parameters and the velocity required for force cancellation.
341. A positive particle enters a region containing uniform fields
\[
\vec E=E_x\hat i+E_y\hat j,\qquad
\vec B=B_0\hat k
\]
where \(E_x,E_y,B_0\gt 0\). Its initial velocity is
\[
\vec v_0=\frac{E_y}{B_0}\hat i
\]
and only electromagnetic forces act.
A student argues that the particle will continue indefinitely along a straight line parallel to positive \(x\) because the transverse electric and magnetic forces cancel at entry.
Which response correctly identifies the error in this argument?
ⓐ. The magnetic field immediately performs positive work, increasing the transverse velocity.
ⓑ. The initial net force is zero, so the particle must move with constant velocity.
ⓒ. The transverse forces initially cancel, but the electric field increases \(v_x\), so the transverse balance is subsequently lost.
ⓓ. The longitudinal electric field has no effect because the magnetic field is perpendicular to it.
Correct Answer: The transverse forces initially cancel, but the electric field increases \(v_x\), so the transverse balance is subsequently lost.
Explanation: The total electromagnetic force is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
At entry,
\[
\vec v_0=\frac{E_y}{B_0}\hat i
\]
The corresponding magnetic contribution is
\[
\vec v_0\times\vec B=-E_y\hat j
\]
This cancels the transverse electric-field component \(E_y\hat j\).
However, the electric field also has a positive-\(x\) component.
The initial resultant force is therefore
\[
\vec F_0=qE_x\hat i
\]
It is not zero.
Because the charge is positive, this longitudinal force initially increases the particle's \(x\)-component of velocity.
The magnetic-force component along negative \(y\) depends on \(v_xB_0\).
As \(v_x\) increases, the magnetic contribution becomes larger in magnitude than the fixed transverse electric contribution.
A nonzero transverse resultant force consequently develops.
The velocity direction then begins to change.
The electric field can perform work because its longitudinal component has a nonzero scalar product with the velocity.
Magnetic force itself continues to perform no work.
The condition \(v_x=E_y/B_0\) describes instantaneous cancellation of transverse forces, not necessarily complete force cancellation.
A truly undeflected constant-velocity trajectory would additionally require the longitudinal electric-force component to vanish or be balanced by another force.
The student's mistake is treating one component of force balance as though it established zero resultant force throughout the motion.
342. A particle of nonzero charge \(q\) moves with a fixed speed \(20\,\text{m s}^{-1}\) in the \(xy\)-plane. Its direction of motion can be chosen freely, but its speed is maintained at that value.
The particle experiences uniform fields
\[
\vec E=3.0\hat j\,\text{N C}^{-1},\qquad
\vec B=0.20\hat k\,\text{T}
\]
Which option gives the minimum and maximum possible magnitudes of its instantaneous electromagnetic force, together with the velocity directions at which they occur?
ⓐ. Minimum \(|q|\,\text{N C}^{-1}\) for motion along positive \(x\); maximum \(7|q|\,\text{N C}^{-1}\) for motion along negative \(x\).
ⓑ. Minimum zero for motion along positive \(x\); maximum \(7|q|\,\text{N C}^{-1}\) for motion along negative \(x\).
ⓒ. Minimum \(|q|\,\text{N C}^{-1}\) for motion along negative \(x\); maximum \(7|q|\,\text{N C}^{-1}\) for motion along positive \(x\).
ⓓ. Minimum \(3|q|\,\text{N C}^{-1}\) for motion along positive \(y\); maximum \(4|q|\,\text{N C}^{-1}\) for motion along negative \(y\).
Correct Answer: Minimum \(|q|\,\text{N C}^{-1}\) for motion along positive \(x\); maximum \(7|q|\,\text{N C}^{-1}\) for motion along negative \(x\).
Explanation: \(\textbf{Determine the fixed magnetic-force magnitude:}\)
The particle's velocity lies in the \(xy\)-plane.
The magnetic field points along positive \(z\).
Therefore, velocity and magnetic field are perpendicular for every permitted direction of motion.
The magnitude of the magnetic part per unit charge is
\[
|\vec v\times\vec B|=vB
\]
Substituting,
\[
vB=(20)(0.20)
\]
\[
vB=4.0\,\text{N C}^{-1}
\]
The electric-field magnitude is
\[
E=3.0\,\text{N C}^{-1}
\]
\(\textbf{Find the minimum possible resultant:}\)
The electric and magnetic contributions can be made antiparallel by selecting the velocity direction.
The smallest possible magnitude of their vector sum is
\[
|\vec E+\vec v\times\vec B|_{\min}=|vB-E|
\]
\[
|\vec E+\vec v\times\vec B|_{\min}=|4.0-3.0|
\]
\[
|\vec E+\vec v\times\vec B|_{\min}=1.0\,\text{N C}^{-1}
\]
For velocity along positive \(x\),
\[
\hat i\times\hat k=-\hat j
\]
Thus, the magnetic contribution points along negative \(y\), opposite to the electric field.
The minimum occurs for positive-\(x\) motion.
\(\textbf{Find the maximum possible resultant:}\)
The largest magnitude occurs when the two contributions reinforce:
\[
|\vec E+\vec v\times\vec B|_{\max}=E+vB
\]
\[
|\vec E+\vec v\times\vec B|_{\max}=3.0+4.0
\]
\[
|\vec E+\vec v\times\vec B|_{\max}=7.0\,\text{N C}^{-1}
\]
For velocity along negative \(x\),
\[
(-\hat i)\times\hat k=+\hat j
\]
The magnetic and electric contributions then point in the same direction.
\(\textbf{Convert to force magnitudes:}\)
Multiplying by the absolute charge magnitude,
\[
F_{\min}=|q|(1.0\,\text{N C}^{-1})
\]
\[
F_{\max}=|q|(7.0\,\text{N C}^{-1})
\]
\(\textbf{Final answer:}\)
\[
\boxed{F_{\min}=|q|(1.0\,\text{N C}^{-1})\ \text{at }\vec v=+20\hat i\,\text{m s}^{-1};\quad
F_{\max}=|q|(7.0\,\text{N C}^{-1})\ \text{at }\vec v=-20\hat i\,\text{m s}^{-1}}
\]
The magnetic contribution has fixed magnitude because both speed and the angle with the magnetic field remain fixed.
Its direction nevertheless changes when the particle's direction of travel changes.
The minimum and maximum total forces therefore follow from vector opposition and reinforcement.
Because the magnetic contribution is larger than the electric contribution, complete cancellation is impossible at the specified speed.
343. Uniform fields are
\[
\vec E=E_0\hat j,\qquad\vec B=B_0\hat k
\]
with \(E_0,B_0\gt 0\).
Particle P has charge \(+q_0\) and is momentarily at rest. Particle Q has charge \(-q_0\), where \(q_0\gt 0\), and moves along positive \(x\) with unknown speed \(v\).
It is observed that the instantaneous resultant electromagnetic-force vectors on P and Q are equal in both magnitude and direction.
What speed must Q have, and what is its instantaneous rate of change of kinetic energy at that instant?
ⓐ. \(v=E_0/B_0\); zero power.
ⓑ. \(v=2E_0/B_0\); positive power \(2q_0E_0^2/B_0\).
ⓒ. \(v=2E_0/B_0\); zero power.
ⓓ. \(v=E_0/(2B_0)\); negative power.
Correct Answer: \(v=2E_0/B_0\); zero power.
Explanation: \(\textbf{Determine the force on the stationary positive particle:}\)
Particle P has zero instantaneous velocity.
Therefore, its magnetic force vanishes:
\[
\vec F_{B,P}=q_0(\vec0\times\vec B)=\vec0
\]
Its resultant force is entirely electric:
\[
\vec F_P=q_0\vec E
\]
\[
\vec F_P=+q_0E_0\hat j
\]
\(\textbf{Determine the force on the moving negative particle:}\)
Particle Q has velocity
\[
\vec v_Q=v\hat i
\]
The magnetic cross product is
\[
\vec v_Q\times\vec B=-vB_0\hat j
\]
Its charge is \(-q_0\).
Therefore,
\[
\vec F_Q=-q_0(E_0-vB_0)\hat j
\]
\[
\vec F_Q=q_0(vB_0-E_0)\hat j
\]
\(\textbf{Impose equality of the force vectors:}\)
The measured condition is
\[
\vec F_Q=\vec F_P
\]
Therefore,
\[
q_0(vB_0-E_0)=q_0E_0
\]
Cancelling \(q_0\),
\[
vB_0-E_0=E_0
\]
\[
vB_0=2E_0
\]
\[
v=\frac{2E_0}{B_0}
\]
\(\textbf{Determine the instantaneous kinetic-energy rate:}\)
The rate of change of kinetic energy is
\[
P=\vec F_Q\cdot\vec v_Q
\]
The force vector points along positive \(y\), while Q's instantaneous velocity points along positive \(x\).
Therefore,
\[
P=q_0E_0\hat j\cdot v\hat i
\]
\[
P=0
\]
\(\textbf{Final answer:}\)
\[
\boxed{v=\frac{2E_0}{B_0},\qquad
\frac{dK}{dt}=0}
\]
The negative particle's electric force points opposite to the electric field, but its magnetic force can oppose that electric force with a larger magnitude.
At the derived speed, its magnetic force exceeds its electric force sufficiently to produce the same net force as that acting on the stationary positive particle.
Although Q has a nonzero force, that force is initially perpendicular to its velocity.
Its kinetic energy is therefore not changing at that instant.
344. A straight conducting rod of mass \(0.050\,\text{kg}\) carries current \(5.0\,\text{A}\). Its directed length vector, taken along the current, is
\[
\vec L=(0.30\hat i+0.40\hat k)\,\text{m}
\]
It lies completely in a uniform magnetic field
\[
\vec B=0.20\hat j\,\text{T}
\]
The rod is held stationary by an adjustable external support. Gravity acts along negative \(z\), with \(g=10\,\text{m s}^{-2}\).
The current is then reversed without changing its magnitude or the rod's position and orientation. The support is adjusted again to hold the rod stationary.
What are the external support-force vectors required before and after reversal?
ⓐ. Initially \((+0.40\hat i+0.20\hat k)\,\text{N}\); finally \((-0.40\hat i+0.80\hat k)\,\text{N}\).
ⓑ. Initially \((-0.40\hat i+0.20\hat k)\,\text{N}\); finally \((+0.40\hat i+0.80\hat k)\,\text{N}\).
ⓒ. Initially \((+0.40\hat i+0.80\hat k)\,\text{N}\); finally \((-0.40\hat i+0.20\hat k)\,\text{N}\).
ⓓ. Initially \((+0.40\hat i-0.20\hat k)\,\text{N}\); finally \((-0.40\hat i-0.80\hat k)\,\text{N}\).
Correct Answer: Initially \((+0.40\hat i+0.20\hat k)\,\text{N}\); finally \((-0.40\hat i+0.80\hat k)\,\text{N}\).
Explanation: \(\textbf{Determine the original magnetic-force vector:}\)
For a straight current-carrying conductor in a uniform magnetic field,
\[
\vec F_B=I(\vec L\times\vec B)
\]
Substituting,
\[
\vec F_B=5.0[(0.30\hat i+0.40\hat k)\times0.20\hat j]
\]
Expanding,
\[
\vec F_B=5.0[0.060(\hat i\times\hat j)+0.080(\hat k\times\hat j)]
\]
Using
\[
\hat i\times\hat j=\hat k,\qquad
\hat k\times\hat j=-\hat i
\]
we obtain
\[
\vec F_B=5.0(0.060\hat k-0.080\hat i)
\]
\[
\vec F_B=-0.40\hat i+0.30\hat k\,\text{N}
\]
\(\textbf{Include the rod's weight:}\)
The gravitational force is
\[
\vec W=-mg\hat k
\]
Substituting,
\[
\vec W=-(0.050)(10)\hat k
\]
\[
\vec W=-0.50\hat k\,\text{N}
\]
\(\textbf{Determine the original support force:}\)
For translational equilibrium,
\[
\vec F_{\mathrm{support},1}+\vec F_B+\vec W=\vec0
\]
Thus,
\[
\vec F_{\mathrm{support},1}=-\vec F_B-\vec W
\]
Substituting,
\[
\vec F_{\mathrm{support},1}
=-(-0.40\hat i+0.30\hat k)-(-0.50\hat k)
\]
\[
\vec F_{\mathrm{support},1}
=+0.40\hat i+0.20\hat k\,\text{N}
\]
\(\textbf{Reverse the current:}\)
The external magnetic field and the physical rod orientation are unchanged.
Reversing the current reverses the directed length vector in the magnetic-force formula.
The magnetic force therefore reverses:
\[
\vec F'_B=+0.40\hat i-0.30\hat k\,\text{N}
\]
The weight is unchanged.
\(\textbf{Determine the new support force:}\)
For the new equilibrium,
\[
\vec F_{\mathrm{support},2}+\vec F'_B+\vec W=\vec0
\]
Hence,
\[
\vec F_{\mathrm{support},2}
=-\vec F'_B-\vec W
\]
\[
\vec F_{\mathrm{support},2}
=-(0.40\hat i-0.30\hat k)+0.50\hat k
\]
\[
\vec F_{\mathrm{support},2}
=-0.40\hat i+0.80\hat k\,\text{N}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{support},1}=(+0.40\hat i+0.20\hat k)\,\text{N},\qquad
\vec F_{\mathrm{support},2}=(-0.40\hat i+0.80\hat k)\,\text{N}}
\]
The magnetic force has both horizontal and vertical components because the conductor is inclined in the \(xz\)-plane.
Its initial upward component partially balances the rod's weight.
After current reversal, that component acts downward and increases the upward support required.
The horizontal support component also reverses because the horizontal magnetic-force component changes direction.
The support must balance the complete vector sum of magnetic force and weight, not merely their vertical components.
345. A positively charged particle of mass \(m\) and charge \(q\) enters a region of uniform magnetic field at the origin with velocity \(v\hat i\). The magnetic field is different on the two sides of the plane \(x=0\):
For \(x\gt 0\), the field is \(+B\hat k\). For \(x\lt 0\), the field is \(-2B\hat k\), where \(B\gt 0\). The particle begins at \((0,0)\), directed into the right-hand region. Each field is uniform within its own half-plane. The particle crosses the boundary freely, without any electric field or energy loss. Ignore the field variation exactly at the boundary.
Define
\[
r=\frac{mv}{qB},\qquad T=\frac{2\pi m}{qB}
\]
After completing one semicircular arc in each region, at what point does the particle next reach the boundary \(x=0\), and what is the total elapsed time?
ⓐ. \((0,-r)\), with elapsed time \(3T/4\)
ⓑ. \((0,-3r)\), with elapsed time \(T\)
ⓒ. \((0,-3r)\), with elapsed time \(3T/4\)
ⓓ. \((0,-r)\), with elapsed time \(T/2\)
Correct Answer: \((0,-3r)\), with elapsed time \(3T/4\)
Explanation: \(\textbf{Trace the first semicircular arc:}\)
In the right-hand region,
\[
\vec B_1=+B\hat k
\]
The initial magnetic force is
\[
\vec F_1=q(v\hat i\times B\hat k)
\]
\[
\vec F_1=-qvB\hat j
\]
The particle therefore curves towards negative \(y\).
Its circular radius is
\[
r_1=\frac{mv}{qB}=r
\]
The centre of this orbit is at \((0,-r)\).
After half a revolution, the particle returns to the boundary at
\[
P_1=(0,-2r)
\]
Its velocity then points along negative \(x\), so it enters the left-hand region.
\(\textbf{Trace the orbit in the reversed field:}\)
In the left-hand region,
\[
\vec B_2=-2B\hat k
\]
The particle's speed is unchanged because magnetic force performs no work.
Its new circular radius is
\[
r_2=\frac{mv}{q(2B)}
\]
\[
r_2=\frac r2
\]
Immediately after crossing, its velocity is \(-v\hat i\).
The magnetic force is
\[
\vec F_2=q(-v\hat i)\times(-2B\hat k)
\]
\[
\vec F_2=-2qvB\hat j
\]
Thus, the second circular centre lies below \(P_1\), at
\[
\left(0,-2r-\frac r2\right)
\]
The particle completes another semicircle in \(x\lt 0\).
Its next boundary crossing is a further diameter below \(P_1\):
\[
y_2=-2r-2\left(\frac r2\right)
\]
\[
y_2=-3r
\]
\(\textbf{Combine the elapsed times:}\)
The first semicircle requires
\[
t_1=\frac T2
\]
The cyclotron period is inversely proportional to magnetic-field magnitude.
The second field has twice the magnitude, so its full period is \(T/2\).
Its semicircle requires
\[
t_2=\frac T4
\]
Therefore,
\[
t_{\mathrm{total}}=\frac T2+\frac T4
\]
\[
t_{\mathrm{total}}=\frac{3T}{4}
\]
\(\textbf{Final answer:}\)
\[
\boxed{P_2=(0,-3r),\qquad t_{\mathrm{total}}=\frac{3T}{4}}
\]
The particle's speed remains constant throughout the two regions.
Its curvature radius and revolution period change because the magnetic-field magnitude changes.
The field reversal also changes the sense of circular rotation.
The final position must be reconstructed from the centres and diameters of the two successive arcs rather than from a single circular orbit.
346. A particle with positive charge \(q\), mass \(m\), and speed \(v\) enters a uniform magnetic field \(B\hat k\) at the origin with velocity \(v\hat i\). It travels through exactly one-quarter of its circular orbit.
Let
\[
F_0=qvB,\qquad T=\frac{2\pi m}{qB}
\]
denote its constant magnetic-force magnitude and full revolution period, respectively.
What are the vector impulse delivered by the magnetic field during this quarter revolution and the magnitude of the average magnetic force over that interval?
ⓐ. Impulse \(-mv(\hat i+\hat j)\); average-force magnitude \(2\sqrt2F_0/\pi\)
ⓑ. Impulse \(mv(\hat i-\hat j)\); average-force magnitude \(2F_0/\pi\)
ⓒ. Impulse \(-mv(\hat i+\hat j)\); average-force magnitude \(F_0\)
ⓓ. Impulse \(-2mv\hat j\); average-force magnitude \(4F_0/\pi\)
Correct Answer: Impulse \(-mv(\hat i+\hat j)\); average-force magnitude \(2\sqrt2F_0/\pi\)
Explanation: \(\textbf{Determine the direction of circular motion:}\)
The initial magnetic force is
\[
\vec F_0=q(v\hat i\times B\hat k)
\]
Using \(\hat i\times\hat k=-\hat j\),
\[
\vec F_0=-qvB\hat j
\]
The positive particle initially curves towards negative \(y\).
Its velocity direction rotates clockwise in the \(xy\)-plane.
After one-quarter of a revolution, the velocity points along negative \(y\).
\(\textbf{Calculate the initial and final momenta:}\)
Initially,
\[
\vec p_i=mv\hat i
\]
After the quarter revolution,
\[
\vec p_f=-mv\hat j
\]
The magnetic impulse equals the change in momentum:
\[
\vec J=\vec p_f-\vec p_i
\]
Therefore,
\[
\vec J=-mv\hat j-mv\hat i
\]
\[
\vec J=-mv(\hat i+\hat j)
\]
Its magnitude is
\[
|\vec J|=\sqrt2mv
\]
\(\textbf{Determine the time interval:}\)
The full revolution period is
\[
T=\frac{2\pi m}{qB}
\]
The quarter-revolution interval is
\[
\Delta t=\frac T4
\]
\[
\Delta t=\frac{\pi m}{2qB}
\]
\(\textbf{Calculate the average-force magnitude:}\)
The average force vector is
\[
\vec F_{\mathrm{avg}}=\frac{\vec J}{\Delta t}
\]
Its magnitude is
\[
|\vec F_{\mathrm{avg}}|=\frac{\sqrt2mv}{\pi m/(2qB)}
\]
\[
|\vec F_{\mathrm{avg}}|=\frac{2\sqrt2qvB}{\pi}
\]
Using \(F_0=qvB\),
\[
|\vec F_{\mathrm{avg}}|=\frac{2\sqrt2}{\pi}F_0
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec J=-mv(\hat i+\hat j),\qquad
|\vec F_{\mathrm{avg}}|=\frac{2\sqrt2}{\pi}F_0}
\]
The magnetic-force magnitude remains \(F_0\) throughout the circular motion, but its direction changes continuously.
Consequently, the magnitude of the vector average force is not equal to the average of the force magnitudes.
Impulse depends on the change in momentum, not on the distance travelled.
The particle's kinetic energy remains unchanged even though its momentum vector changes appreciably.
347. A positively charged particle enters a uniform magnetic-field strip through the origin. Its initial velocity makes an angle of \(30^\circ\) above the positive \(x\)-axis.
The particle enters the region \(0\leq x\leq 3R/2\), where the field is \(+B\hat k\). Outside this strip the magnetic field is zero. The particle has mass \(m\), charge \(q\gt 0\), and constant speed \(v\), with \(R=mv/(qB)\). At entry its velocity is \(v(\cos30^\circ\hat i+\sin30^\circ\hat j)\). The strip extends indefinitely along \(y\), and its right-hand boundary is included in the field region.
Which option correctly describes the particle's first contact with the right-hand boundary and its subsequent return to the entrance boundary?
Here \(T=2\pi m/(qB)\).
ⓐ. It crosses into \(x\gt 3R/2\), so it never returns to \(x=0\).
ⓑ. It first touches \(x=3R/2\) at \(t=T/2\), then returns to \(x=0\) at \(y=-R\).
ⓒ. It first touches \(x=3R/2\) at \(t=T/3\), then returns to \(x=0\) at \(y=-\sqrt3R\) after total time \(2T/3\).
ⓓ. It first touches \(x=3R/2\) at \(t=T/6\), then returns to the origin at time \(T\).
Correct Answer: It first touches \(x=3R/2\) at \(t=T/3\), then returns to \(x=0\) at \(y=-\sqrt3R\) after total time \(2T/3\).
Explanation: \(\textbf{Locate the centre of the circular trajectory:}\)
The initial velocity is
\[
\vec v=v\left(\frac{\sqrt3}{2}\hat i+\frac12\hat j\right)
\]
The magnetic field points along positive \(z\).
For positive charge, the magnetic force is
\[
\vec F=q(\vec v\times B\hat k)
\]
\[
\vec F=qvB\left(\frac12\hat i-\frac{\sqrt3}{2}\hat j\right)
\]
This points towards the circular centre.
The particle's orbit radius is \(R\).
Therefore, relative to its entry point, the centre is displaced by
\[
\vec r_c=R\left(\frac12\hat i-\frac{\sqrt3}{2}\hat j\right)
\]
The centre coordinates are
\[
(x_c,y_c)=\left(\frac R2,-\frac{\sqrt3R}{2}\right)
\]
\(\textbf{Determine the greatest horizontal penetration:}\)
The maximum \(x\)-coordinate of the circle is
\[
x_{\max}=x_c+R
\]
\[
x_{\max}=\frac R2+R
\]
\[
x_{\max}=\frac{3R}{2}
\]
Thus, the trajectory is tangent to the right-hand strip boundary.
It does not enter the field-free region beyond that boundary.
\(\textbf{Determine the time of tangency:}\)
At entry, the radius vector from the centre to the particle makes an angle of \(120^\circ\) with positive \(x\).
The positive particle rotates clockwise in a field along positive \(z\).
At the rightmost point, this radial angle becomes \(0^\circ\).
Therefore, the angular sweep is
\[
\Delta\phi_1=120^\circ=\frac{2\pi}{3}
\]
The angular speed is
\[
\omega=\frac{qB}{m}=\frac{2\pi}{T}
\]
Hence,
\[
t_1=\frac{\Delta\phi_1}{\omega}
\]
\[
t_1=\frac{T}{3}
\]
\(\textbf{Find the second intersection with }x=0\textbf{:}\)
The circular equation is
\[
\left(x-\frac R2\right)^2+
\left(y+\frac{\sqrt3R}{2}\right)^2=R^2
\]
At \(x=0\),
\[
\frac{R^2}{4}+
\left(y+\frac{\sqrt3R}{2}\right)^2=R^2
\]
Therefore,
\[
\left(y+\frac{\sqrt3R}{2}\right)^2=\frac{3R^2}{4}
\]
The two solutions are
\[
y=0,\qquad y=-\sqrt3R
\]
The second solution is the return point.
The radial angle there is \(-120^\circ\).
The total clockwise sweep from \(120^\circ\) to \(-120^\circ\) is \(240^\circ\), giving
\[
t_{\mathrm{return}}=\frac{240^\circ}{360^\circ}T
\]
\[
t_{\mathrm{return}}=\frac{2T}{3}
\]
\(\textbf{Final answer:}\)
\[
\boxed{t_{\mathrm{tangent}}=\frac T3,\quad
(x_{\mathrm{tangent}},y_{\mathrm{tangent}})
=\left(\frac{3R}{2},-\frac{\sqrt3R}{2}\right),\quad
P_{\mathrm{return}}=(0,-\sqrt3R),\quad
t_{\mathrm{return}}=\frac{2T}{3}}
\]
The particle's oblique entry shifts the circular centre away from the entrance boundary.
Its greatest horizontal penetration is therefore not simply equal to its orbit radius.
A tangent contact with the far boundary does not require the particle to pass into the field-free region.
The return position and elapsed time follow from the complete circular geometry.
348. A positively charged particle travels helically in a uniform magnetic field \(B\hat k\). Its perpendicular velocity component is \(u\), and its parallel velocity component is \(2u\), where \(u\gt 0\).
At \(t=0\), the particle is at \((r,0,0)\), and its velocity is
\[
\vec v_0=-u\hat j+2u\hat k
\]
The circular projection is centred on the \(z\)-axis, with radius \(r=mu/(qB)\). The particle passes through a detector plane at \(z=5\pi r\), without being deflected by the detector.
Which pair gives its transverse coordinates and velocity at its first crossing of the detector plane?
ⓐ. \((x,y)=(-r,0)\); velocity \((+u\hat j+2u\hat k)\)
ⓑ. \((x,y)=(0,-r)\); velocity \((-u\hat i+2u\hat k)\)
ⓒ. \((x,y)=(0,+r)\); velocity \((+u\hat i+2u\hat k)\)
ⓓ. \((x,y)=(0,+r)\); velocity \((-u\hat i+2u\hat k)\)
Correct Answer: \((x,y)=(0,+r)\); velocity \((+u\hat i+2u\hat k)\)
Explanation: \(\textbf{Relate axial travel to revolution phase:}\)
The angular frequency of circular motion is
\[
\omega=\frac{qB}{m}
\]
Its orbit radius satisfies
\[
r=\frac{u}{\omega}
\]
Therefore,
\[
\omega=\frac ur
\]
The parallel velocity component is \(2u\).
Because magnetic force has no axial component, this velocity remains constant:
\[
z(t)=2ut
\]
At the detector plane,
\[
z=5\pi r
\]
Thus,
\[
2ut=5\pi r
\]
\[
t=\frac{5\pi r}{2u}
\]
\(\textbf{Determine the circular phase at detection:}\)
The angular displacement is
\[
\omega t=\frac ur\frac{5\pi r}{2u}
\]
\[
\omega t=\frac{5\pi}{2}
\]
This corresponds to one full revolution plus one-quarter revolution.
\(\textbf{Determine the sense of motion:}\)
At \(t=0\), the perpendicular velocity points along negative \(y\).
The circular position is initially at \((r,0)\).
Therefore, the circular projection rotates clockwise when viewed from positive \(z\).
Its transverse position can be written as
\[
x(t)=r\cos\omega t
\]
\[
y(t)=-r\sin\omega t
\]
At \(\omega t=5\pi/2\),
\[
x=r\cos\frac{5\pi}{2}=0
\]
\[
y=-r\sin\frac{5\pi}{2}=-r
\]
\(\textbf{Calculate the velocity components:}\)
Differentiating the transverse coordinates,
\[
v_x=-u\sin\omega t
\]
\[
v_y=-u\cos\omega t
\]
At detection,
\[
v_x=-u,\qquad v_y=0
\]
The axial component remains \(2u\).
Thus,
\[
\vec v=-u\hat i+2u\hat k
\]
\(\textbf{Final answer:}\)
\[
\boxed{(x,y)=(0,-r),\qquad
\vec v=-u\hat i+2u\hat k}
\]
The detector position fixes the travel time through the unchanged axial velocity.
That time determines the angular phase of the circular projection.
One full revolution restores the initial transverse position and velocity, but the additional quarter revolution changes them.
The axial velocity remains unchanged because the magnetic force is perpendicular to the magnetic field.
The phase and sign of circular motion must both be accounted for when reconstructing the detector crossing.
349. A nonrelativistic positive particle moves in a uniform magnetic field \(B\hat k\). Its speed \(v\) remains fixed, but the angle \(\theta\) made by its velocity with positive \(z\) can be varied between \(0^\circ\) and \(90^\circ\).
A graph is obtained by plotting the measured helical radius \(r\) against \(\sin\theta\). The graph is a straight line through the origin with slope \(0.12\,\text{m}\). The particle speed is \(6.0\times10^5\,\text{m s}^{-1}\), and the magnetic-field magnitude is \(0.20\,\text{T}\). The field, particle mass and charge remain unchanged throughout the observations.
What are the particle's charge-to-mass ratio and its helical pitch when \(\theta=60^\circ\)?
ⓐ. \(q/m=2.5\times10^7\,\text{C kg}^{-1}\); pitch \(0.12\pi\,\text{m}\)
ⓑ. \(q/m=5.0\times10^7\,\text{C kg}^{-1}\); pitch \(0.06\pi\,\text{m}\)
ⓒ. \(q/m=2.5\times10^7\,\text{C kg}^{-1}\); pitch \(0.24\pi\,\text{m}\)
ⓓ. \(q/m=2.5\times10^7\,\text{C kg}^{-1}\); pitch \(0.12\pi\,\text{m}\)
Correct Answer: \(q/m=2.5\times10^7\,\text{C kg}^{-1}\); pitch \(0.12\pi\,\text{m}\)
Explanation: \(\textbf{Interpret the radius–inclination graph:}\)
The component of velocity perpendicular to the field is
\[
v_\perp=v\sin\theta
\]
The helical radius is
\[
r=\frac{mv_\perp}{qB}
\]
Therefore,
\[
r=\frac{mv}{qB}\sin\theta
\]
The slope of the graph of \(r\) against \(\sin\theta\) is
\[
s=\frac{mv}{qB}
\]
\(\textbf{Recover the charge-to-mass ratio:}\)
Rearranging,
\[
\frac qm=\frac{v}{Bs}
\]
Substituting,
\[
\frac qm=\frac{6.0\times10^5}{(0.20)(0.12)}
\]
\[
\frac qm=\frac{6.0\times10^5}{0.024}
\]
\[
\frac qm=2.5\times10^7\,\text{C kg}^{-1}
\]
\(\textbf{Determine the parallel velocity component:}\)
At the specified inclination,
\[
\theta=60^\circ
\]
The parallel component is
\[
v_\parallel=v\cos60^\circ
\]
\[
v_\parallel=(6.0\times10^5)\frac12
\]
\[
v_\parallel=3.0\times10^5\,\text{m s}^{-1}
\]
\(\textbf{Find the revolution period:}\)
The revolution period is
\[
T=\frac{2\pi m}{qB}
\]
Equivalently,
\[
T=\frac{2\pi}{(q/m)B}
\]
Substituting,
\[
T=\frac{2\pi}{(2.5\times10^7)(0.20)}
\]
\[
T=\frac{2\pi}{5.0\times10^6}
\]
\[
T=4.0\pi\times10^{-7}\,\text{s}
\]
\(\textbf{Determine the pitch:}\)
The pitch is the axial distance travelled in one revolution:
\[
p=v_\parallel T
\]
\[
p=(3.0\times10^5)(4.0\pi\times10^{-7})
\]
\[
p=0.12\pi\,\text{m}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\frac qm=2.5\times10^7\,\text{C kg}^{-1},\qquad
p=0.12\pi\,\text{m}}
\]
The slope of the radius graph determines the mass-to-charge ratio indirectly.
The parallel velocity component, which does not affect the radius, controls the helical pitch.
The revolution period depends on the charge-to-mass ratio and magnetic field but not on the particle's inclination.
The two trajectory measurements therefore extract different aspects of the same helical motion.
350. A uniform magnetic field is applied along positive \(z\). A positively charged particle is observed moving with instantaneous velocity
\[
\vec v=3\hat i+4\hat j+5\hat k
\]
in SI units.
Three proposed measurements of its instantaneous magnetic-force vector are shown below. The values \(F_0\gt 0\) and \(B\gt 0\) are fixed, and the particle charge is \(q\gt 0\).
| Measurement | Proposed force vector |
| P | \(qB(4\hat i-3\hat j)\) |
| Q | \(qB(4\hat i-3\hat j+2\hat k)\) |
| R | \(qB(-4\hat i+3\hat j)\) |
A student claims that all three are compatible with magnetic force in the stated field because each can be perpendicular to at least one component of the particle's velocity.
Which assessment is correct?
ⓐ. P and Q are possible; R is impossible.
ⓑ. P alone is possible; Q has a forbidden field-parallel force component, while R has the wrong cross-product direction.
ⓒ. Q alone is possible because the particle has a nonzero axial velocity.
ⓓ. P, Q and R are all possible because magnetic force can reverse without reversing the magnetic field.
Correct Answer: P alone is possible; Q has a forbidden field-parallel force component, while R has the wrong cross-product direction.
Explanation: The magnetic force on a charged particle is
\[
\vec F_B=q(\vec v\times\vec B)
\]
The field is along positive \(z\):
\[
\vec B=B\hat k
\]
Substitute the given velocity:
\[
\vec F_B=q(3\hat i+4\hat j+5\hat k)\times B\hat k
\]
The component parallel to the magnetic field contributes no cross product:
\[
5\hat k\times\hat k=\vec0
\]
Therefore,
\[
\vec F_B=qB[3(\hat i\times\hat k)+4(\hat j\times\hat k)]
\]
Using
\[
\hat i\times\hat k=-\hat j,\qquad
\hat j\times\hat k=\hat i
\]
we obtain
\[
\vec F_B=qB(4\hat i-3\hat j)
\]
This matches measurement P.
Measurement Q contains the additional component \(2qB\hat k\).
A magnetic force cannot have a component parallel to the magnetic field because a cross product is perpendicular to both vectors involved.
Therefore, Q is impossible for the stated field.
Measurement R reverses the entire correct force vector.
That reversal would be appropriate if the sign of charge or direction of magnetic field were reversed, but neither change is allowed here.
Therefore, R is also incompatible.
The magnetic force must be perpendicular to the complete instantaneous velocity, not merely to one arbitrarily selected component of it.
It must also point in the direction prescribed by the signed cross product.
Checking only perpendicularity is necessary but not sufficient to validate a proposed magnetic-force measurement.
The observed axial velocity affects the particle's motion along the field but not its instantaneous magnetic-force vector.
351. A positively charged particle initially moves with velocity \(v\hat i\) in a uniform magnetic field \(B\hat k\). Its initial circular orbit radius is \(r\), and its revolution period is \(T\).
An external agent then instantaneously adds a velocity component \(+\sqrt3v\hat k\) without changing the perpendicular component of velocity. The agent ceases acting immediately afterward.
Which pair correctly gives the ratios of the particle's new total kinetic energy and new helical pitch to its original kinetic energy and original orbit circumference, respectively?
ⓐ. \(K'/K=2\), \(p/(2\pi r)=\sqrt3\)
ⓑ. \(K'/K=4\), \(p/(2\pi r)=1/\sqrt3\)
ⓒ. \(K'/K=4\), \(p/(2\pi r)=\sqrt3\)
ⓓ. \(K'/K=3\), \(p/(2\pi r)=\sqrt3\)
Correct Answer: \(K'/K=4\), \(p/(2\pi r)=\sqrt3\)
Explanation: \(\textbf{Determine the original kinetic energy:}\)
Initially, the entire particle velocity is perpendicular to the magnetic field.
Therefore,
\[
K=\frac12mv^2
\]
Its circular radius is
\[
r=\frac{mv}{qB}
\]
and revolution period is
\[
T=\frac{2\pi m}{qB}
\]
\(\textbf{Apply the externally added axial velocity:}\)
The perpendicular component remains \(v\).
The new parallel component is
\[
v_\parallel'=\sqrt3v
\]
The two components are perpendicular.
Thus, the new speed satisfies
\[
v'^2=v^2+(\sqrt3v)^2
\]
\[
v'^2=4v^2
\]
The new kinetic energy is
\[
K'=\frac12m(4v^2)
\]
\[
K'=4K
\]
\(\textbf{Determine the new pitch:}\)
The added axial component does not affect the magnetic curvature caused by the perpendicular motion.
Therefore, both \(r\) and \(T\) remain unchanged.
The new helical pitch is
\[
p=v_\parallel'T
\]
\[
p=\sqrt3v\frac{2\pi m}{qB}
\]
Using \(r=mv/(qB)\),
\[
p=2\pi\sqrt3r
\]
Hence,
\[
\frac{p}{2\pi r}=\sqrt3
\]
\(\textbf{Final answer:}\)
\[
\boxed{\frac{K'}K=4,\qquad
\frac{p}{2\pi r}=\sqrt3}
\]
The particle's kinetic energy increases because the external agent adds an independent velocity component.
The magnetic field itself performs no work after that change.
The helical radius remains controlled by the unchanged perpendicular velocity.
The pitch increases from zero because the particle now advances along the magnetic field during each circular revolution.
The energy ratio and geometric pitch ratio follow from different uses of the perpendicular and parallel velocity components.
352. Two charged particles, P and Q, have equal masses \(m\) and equal-magnitude charges \(q\gt 0\). They enter the same uniform magnetic field \(B\hat k\) from rest after being accelerated through potential differences \(V\) and \(4V\), respectively. Both enter perpendicular to the field, so they follow circular paths.
In separate observations, the particles traverse circular arcs having the same physical arc length \(s\), small enough that both arcs lie within the field region. Let their respective angular deflections be \(\theta_P,\theta_Q\) and their traversal times be \(t_P,t_Q\).
Which pair of ratios is correct?
ⓐ. \(\theta_Q/\theta_P=1/2\), \(t_Q/t_P=1/2\)
ⓑ. \(\theta_Q/\theta_P=1/2\), \(t_Q/t_P=1\)
ⓒ. \(\theta_Q/\theta_P=1/4\), \(t_Q/t_P=1/2\)
ⓓ. \(\theta_Q/\theta_P=2\), \(t_Q/t_P=1/2\)
Correct Answer: \(\theta_Q/\theta_P=1/2\), \(t_Q/t_P=1/2\)
Explanation: \(\textbf{Compare the speeds after electric acceleration:}\)
A particle accelerated from rest through potential difference \(V\) gains kinetic energy
\[
qV=\frac12mv^2
\]
For particle P,
\[
v_P=\sqrt{\frac{2qV}{m}}
\]
For particle Q, accelerated through \(4V\),
\[
v_Q=\sqrt{\frac{2q(4V)}{m}}
\]
\[
v_Q=2v_P
\]
\(\textbf{Compare their magnetic orbit radii:}\)
For perpendicular entry into a uniform magnetic field,
\[
r=\frac{mv}{qB}
\]
Both particles have the same mass and charge magnitude.
Therefore,
\[
\frac{r_Q}{r_P}=\frac{v_Q}{v_P}
\]
\[
r_Q=2r_P
\]
\(\textbf{Use the equal physical arc lengths:}\)
For circular motion, the arc length and angular displacement are related by
\[
s=r\theta
\]
The particles traverse equal arc lengths:
\[
r_P\theta_P=r_Q\theta_Q
\]
Therefore,
\[
\frac{\theta_Q}{\theta_P}=\frac{r_P}{r_Q}
\]
\[
\frac{\theta_Q}{\theta_P}=\frac12
\]
\(\textbf{Compare the traversal times:}\)
Magnetic force changes velocity direction without changing speed.
Thus, the time needed to traverse arc length \(s\) is
\[
t=\frac sv
\]
Consequently,
\[
\frac{t_Q}{t_P}=\frac{v_P}{v_Q}
\]
\[
\frac{t_Q}{t_P}=\frac12
\]
\(\textbf{Check against angular frequency:}\)
Both particles have the same angular frequency:
\[
\omega=\frac{qB}{m}
\]
Therefore, their traversal-time ratio must equal their angular-deflection ratio.
The two calculated ratios agree.
\(\textbf{Final answer:}\)
\[
\boxed{\frac{\theta_Q}{\theta_P}=\frac12,\qquad
\frac{t_Q}{t_P}=\frac12}
\]
Both particles have the same full revolution period, despite travelling at different speeds.
However, the observations compare equal physical distances rather than equal fractions of their orbits.
The faster particle moves on a larger circle, subtends a smaller angle over the same arc length, and completes that arc in less time.
The distinction between equal arc length and equal angular displacement is essential.
353. A positively charged particle of mass \(m\) and charge \(q\) initially moves with velocity \(v\hat i\) in uniform fields
\[
\vec E=E\hat k,\qquad \vec B=B\hat k
\]
where \(E,B\gt 0\). Its initial axial velocity is zero. The particle remains in these fields, and its motion is observed after a time
\[
T=\frac{2\pi m}{qB}
\]
Which option correctly gives its axial displacement, axial velocity, and kinetic-energy increase after this time?
ⓐ. \(z=\pi mE/(qB^2)\), \(v_z=2\pi E/B\), \(\Delta K=\pi mE^2/B^2\)
ⓑ. \(z=2\pi^2mE/(qB^2)\), \(v_z=0\), \(\Delta K=0\)
ⓒ. \(z=2\pi^2mE/(qB^2)\), \(v_z=2\pi E/B\), \(\Delta K=0\)
ⓓ. \(z=2\pi^2mE/(qB^2)\), \(v_z=2\pi E/B\), \(\Delta K=2\pi^2mE^2/B^2\)
Correct Answer: \(z=2\pi^2mE/(qB^2)\), \(v_z=2\pi E/B\), \(\Delta K=2\pi^2mE^2/B^2\)
Explanation: \(\textbf{Separate transverse and axial dynamics:}\)
The magnetic field points along positive \(z\).
The particle initially moves perpendicular to it.
The magnetic force maintains circular motion in the transverse plane.
The electric field also points along positive \(z\).
It therefore produces acceleration along the magnetic-field axis.
The axial acceleration is
\[
a_z=\frac{qE}{m}
\]
The magnetic force has no axial component.
\(\textbf{Determine the axial velocity after one circular period:}\)
The perpendicular circular motion has period
\[
T=\frac{2\pi m}{qB}
\]
The initial axial velocity is zero.
Therefore,
\[
v_z=a_zT
\]
Substituting,
\[
v_z=\frac{qE}{m}\frac{2\pi m}{qB}
\]
\[
v_z=\frac{2\pi E}{B}
\]
\(\textbf{Calculate axial displacement:}\)
The axial acceleration is constant.
Therefore,
\[
z=\frac12a_zT^2
\]
Substituting,
\[
z=\frac12\frac{qE}{m}
\left(\frac{2\pi m}{qB}\right)^2
\]
\[
z=\frac12\frac{qE}{m}
\frac{4\pi^2m^2}{q^2B^2}
\]
\[
z=\frac{2\pi^2mE}{qB^2}
\]
\(\textbf{Determine the kinetic-energy increase:}\)
Magnetic force performs no work.
The electric field does work through the axial displacement:
\[
\Delta K=qEz
\]
Substituting,
\[
\Delta K=qE\frac{2\pi^2mE}{qB^2}
\]
\[
\Delta K=\frac{2\pi^2mE^2}{B^2}
\]
\(\textbf{Final answer:}\)
\[
\boxed{z=\frac{2\pi^2mE}{qB^2},\qquad
v_z=\frac{2\pi E}{B},\qquad
\Delta K=\frac{2\pi^2mE^2}{B^2}}
\]
The electric field increases the axial velocity while leaving the perpendicular magnetic circular motion unchanged.
The axial advance during successive revolutions therefore increases with time.
Unlike a helix in a magnetic field alone, this trajectory does not have constant pitch.
The particle's kinetic-energy increase is entirely due to electric work.
The revolution period remains determined by the magnetic field and the charge-to-mass ratio.
354. A positive test particle of charge \(2.0\,\mu\text{C}\) is used to investigate unknown uniform electric and magnetic fields. The electric field lies in the \(xy\)-plane, while the magnetic field is known to point along positive \(z\).
| Trial | Instantaneous particle velocity | Measured electromagnetic force |
| P | \(\vec0\) | \((6\hat i+8\hat j)\,\mu\text{N}\) |
| Q | \(5.0\hat i\,\text{m s}^{-1}\) | \((6\hat i-12\hat j)\,\mu\text{N}\) |
What are the uniform fields and a particle velocity for which the resultant electromagnetic force would vanish?
ⓐ. \(\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1}\), \(\vec B=2\hat k\,\text{T}\), \(\vec v=(2\hat i-1.5\hat j)\,\text{m s}^{-1}\)
ⓑ. \(\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1}\), \(\vec B=2\hat k\,\text{T}\), \(\vec v=(-2\hat i+1.5\hat j)\,\text{m s}^{-1}\)
ⓒ. \(\vec E=(6\hat i+8\hat j)\,\text{N C}^{-1}\), \(\vec B=2\hat k\,\text{T}\), \(\vec v=(2\hat i-1.5\hat j)\,\text{m s}^{-1}\)
ⓓ. \(\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1}\), \(\vec B=4\hat k\,\text{T}\), \(\vec v=(2\hat i-1.5\hat j)\,\text{m s}^{-1}\)
Correct Answer: \(\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1}\), \(\vec B=2\hat k\,\text{T}\), \(\vec v=(2\hat i-1.5\hat j)\,\text{m s}^{-1}\)
Explanation: \(\textbf{Use the stationary trial to recover the electric field:}\)
The electromagnetic force is
\[
\vec F=q(\vec E+\vec v\times\vec B)
\]
When the particle is stationary,
\[
\vec v=\vec0
\]
Therefore,
\[
\vec F_P=q\vec E
\]
The electric field is
\[
\vec E=\frac{\vec F_P}{q}
\]
Substituting,
\[
\vec E=\frac{(6\hat i+8\hat j)\times10^{-6}}
{2.0\times10^{-6}}
\]
\[
\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1}
\]
\(\textbf{Recover the magnetic field from the moving trial:}\)
In Trial Q,
\[
\vec v_Q=5.0\hat i\,\text{m s}^{-1}
\]
Let
\[
\vec B=B_0\hat k
\]
The magnetic contribution per unit charge is
\[
\vec v_Q\times\vec B=-5B_0\hat j
\]
Therefore,
\[
\frac{\vec F_Q}{q}=(3\hat i+4\hat j)-5B_0\hat j
\]
From the measured force,
\[
\frac{\vec F_Q}{q}=(3\hat i-6\hat j)\,\text{N C}^{-1}
\]
Equating \(y\)-components,
\[
4-5B_0=-6
\]
\[
B_0=2.0\,\text{T}
\]
\(\textbf{Find a zero-force velocity:}\)
Let
\[
\vec v=v_x\hat i+v_y\hat j
\]
For zero electromagnetic force,
\[
\vec E+\vec v\times\vec B=\vec0
\]
Substituting the reconstructed fields,
\[
(3+2v_y)\hat i+(4-2v_x)\hat j=\vec0
\]
The two conditions are
\[
3+2v_y=0
\]
\[
v_y=-1.5\,\text{m s}^{-1}
\]
and
\[
4-2v_x=0
\]
\[
v_x=2.0\,\text{m s}^{-1}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1},\qquad
\vec B=2\hat k\,\text{T},\qquad
\vec v=(2\hat i-1.5\hat j)\,\text{m s}^{-1}}
\]
The stationary measurement isolates electric force because magnetic force vanishes at zero velocity.
The second measurement identifies the magnetic contribution through the changed force.
Both field components must be reconstructed before the zero-force velocity can be determined.
The required velocity is generally not directed along either coordinate axis when the electric field has two transverse components.
355. A particle of nonzero charge \(q\) moves through uniform fields
\[
\vec E=(3\hat i+4\hat j)\,\text{N C}^{-1},\qquad
\vec B=2\hat k\,\text{T}
\]
Its initial velocity is
\[
\vec v=(2\hat i-1.5\hat j+7\hat k)\,\text{m s}^{-1}
\]
The particle initially experiences zero electromagnetic force.
At a particular instant, the electric field is switched off while the magnetic field remains unchanged. The particle's velocity is continuous during switching.
Consider the following statements about the instant immediately after the electric field is removed.
Statement I: The particle now experiences a nonzero magnetic force.
Statement II: The instantaneous magnetic-force vector is \(-q(3\hat i+4\hat j)\,\text{N C}^{-1}\).
Statement III: The magnetic force initially changes the particle's kinetic energy because its magnitude is nonzero.
Statement IV: Its velocity component parallel to the magnetic field remains unaffected by subsequent magnetic force.
Which statements are correct?
ⓐ. I, II and IV only
ⓑ. I, II and III only
ⓒ. I, III and IV only
ⓓ. II, III and IV only
Correct Answer: I, II and IV only
Explanation: The magnetic force on a particle is
\[
\vec F_B=q(\vec v\times\vec B)
\]
Before the electric field is removed, the stated velocity satisfies the cancellation condition
\[
\vec E+\vec v\times\vec B=\vec0
\]
This means the magnetic and electric forces are equal and opposite.
It does not mean that either individual contribution is zero.
After switching off the electric field, the same magnetic force remains at that instant.
Therefore, Statement I is correct.
To determine its direction, calculate
\[
\vec v\times\vec B
=(2\hat i-1.5\hat j+7\hat k)\times2\hat k
\]
Using the Cartesian cross products,
\[
\vec v\times\vec B=-3\hat i-4\hat j
\]
Thus,
\[
\vec F_B=-q(3\hat i+4\hat j)
\]
Statement II is correct.
The magnetic force is perpendicular to the particle's instantaneous velocity.
Consequently,
\[
\vec F_B\cdot\vec v=0
\]
The magnetic force cannot perform work or change the particle's kinetic energy.
Statement III is incorrect.
The velocity component along positive \(z\) is parallel to the magnetic field.
Magnetic force has no component along that direction.
Therefore, the parallel velocity remains unchanged during the subsequent motion in the magnetic field alone.
Statement IV is correct.
The sudden removal of the electric field destroys the original force cancellation without requiring any instantaneous change in velocity.
The particle thereafter undergoes helical motion in the remaining uniform magnetic field.
Its perpendicular velocity component produces circular motion, while its parallel component produces uniform axial advance.
The distinction between nonzero magnetic force and zero magnetic power is central to this interpretation.
356. A thin conducting wire carries steady current \(2.0\,\text{A}\) from point \(A=(0,0,0)\) to point \(C=(0.30,0.40,0)\), where coordinates are in metres. Between these endpoints, it follows an arbitrary bent path lying in the \(xy\)-plane.
The entire wire is immersed in a uniform magnetic field
\[
\vec B=0.50\hat k\,\text{T}
\]
The wire is subsequently reshaped into a straight segment joining the same endpoints, without changing its current direction or the field.
Which statement correctly gives the resultant magnetic force before and after reshaping?
ⓐ. The bent wire experiences a greater force because its conducting length is greater.
ⓑ. Both arrangements experience \((0.40\hat i-0.30\hat j)\,\text{N}\), with magnitude \(0.50\,\text{N}\).
ⓒ. Both arrangements experience \((-0.40\hat i+0.30\hat j)\,\text{N}\), with magnitude \(0.50\,\text{N}\).
ⓓ. Both arrangements experience zero resultant force because the endpoints are fixed.
Correct Answer: Both arrangements experience \((0.40\hat i-0.30\hat j)\,\text{N}\), with magnitude \(0.50\,\text{N}\).
Explanation: \(\textbf{Apply the magnetic force law to a current element:}\)
For a small conductor element,
\[
d\vec F=I(d\vec l\times\vec B)
\]
The total force on the wire is
\[
\vec F=I\int_A^C d\vec l\times\vec B
\]
The magnetic field is uniform, so it can be taken outside the line integral:
\[
\vec F=I\left(\int_A^C d\vec l\right)\times\vec B
\]
The vector sum of directed path elements is the endpoint displacement:
\[
\int_A^C d\vec l=\vec r_C-\vec r_A
\]
\(\textbf{Determine the endpoint displacement:}\)
The coordinates give
\[
\vec r_A=\vec0
\]
and
\[
\vec r_C=0.30\hat i+0.40\hat j
\]
Therefore,
\[
\Delta\vec r=0.30\hat i+0.40\hat j\,\text{m}
\]
\(\textbf{Calculate the total magnetic force:}\)
\[
\vec F=2.0[(0.30\hat i+0.40\hat j)\times0.50\hat k]
\]
Expanding,
\[
\vec F=2.0[0.15(\hat i\times\hat k)+0.20(\hat j\times\hat k)]
\]
Using
\[
\hat i\times\hat k=-\hat j,\qquad
\hat j\times\hat k=\hat i
\]
we obtain
\[
\vec F=2.0(-0.15\hat j+0.20\hat i)
\]
\[
\vec F=0.40\hat i-0.30\hat j\,\text{N}
\]
Its magnitude is
\[
F=\sqrt{0.40^2+(-0.30)^2}
\]
\[
F=0.50\,\text{N}
\]
\(\textbf{Assess the effect of reshaping:}\)
Reshaping changes the individual current-element directions along the wire.
However, the endpoint displacement remains unchanged.
Because the magnetic field and current are also unchanged, the vector integral gives the same resultant force.
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{bent}}=\vec F_{\mathrm{straight}}
=(0.40\hat i-0.30\hat j)\,\text{N},\qquad F=0.50\,\text{N}}
\]
The total magnetic force on an open current path in a uniform field depends on its directed endpoint displacement.
It does not depend on the detailed shape or total conducting length of the path.
The forces on individual portions can nevertheless differ after reshaping.
This result applies to the resultant force; it does not imply that the torques or internal mechanical stresses are unchanged.
357. A straight horizontal conducting rod of length \(0.50\,\text{m}\) and mass \(0.10\,\text{kg}\) carries current \(2.0\,\text{A}\) along positive \(x\). It is suspended vertically by a light spring of force constant \(20\,\text{N m}^{-1}\).
The rod lies entirely in a uniform magnetic field
\[
\vec B=0.80\hat j\,\text{T}
\]
Positive \(z\) is upward, and \(g=10\,\text{m s}^{-2}\). The rod is constrained to remain horizontal, and the spring extension is measured from its natural length.
In separate equilibrium trials, the current is directed first along positive \(x\) and then reversed along negative \(x\), with its magnitude unchanged. Which pair gives the spring extensions?
ⓐ. Initially \(0.010\,\text{m}\); after reversal \(0.090\,\text{m}\).
ⓑ. Initially \(0.090\,\text{m}\); after reversal \(0.010\,\text{m}\).
ⓒ. Initially \(0.050\,\text{m}\); after reversal \(0.050\,\text{m}\).
ⓓ. Initially \(0.010\,\text{m}\); after reversal \(0.050\,\text{m}\).
Correct Answer: Initially \(0.010\,\text{m}\); after reversal \(0.090\,\text{m}\).
Explanation: \(\textbf{Determine the initial magnetic-force direction:}\)
The force on a straight current-carrying rod is
\[
\vec F_B=I(\vec L\times\vec B)
\]
Initially,
\[
\vec L=0.50\hat i\,\text{m}
\]
The magnetic field points along positive \(y\).
Therefore,
\[
\vec F_B=2.0(0.50\hat i\times0.80\hat j)
\]
Using \(\hat i\times\hat j=\hat k\),
\[
\vec F_B=+0.80\hat k\,\text{N}
\]
The magnetic force acts upward.
\(\textbf{Calculate the gravitational force:}\)
The rod's weight is
\[
W=mg
\]
\[
W=(0.10)(10)
\]
\[
W=1.0\,\text{N}
\]
It acts downward.
\(\textbf{Balance forces in the first equilibrium:}\)
Let the initial spring extension be \(x_1\).
The spring exerts upward force \(kx_1\).
Therefore,
\[
kx_1+F_B=W
\]
\[
(20)x_1+0.80=1.0
\]
\[
20x_1=0.20
\]
\[
x_1=0.010\,\text{m}
\]
\(\textbf{Reverse the current and establish the new equilibrium:}\)
Current reversal reverses the magnetic force:
\[
\vec F'_B=-0.80\hat k\,\text{N}
\]
It now acts downward along with the weight.
The upward spring force must balance both:
\[
kx_2=W+F_B
\]
where \(F_B=0.80\,\text{N}\) denotes the magnetic-force magnitude.
Substituting,
\[
20x_2=1.0+0.80
\]
\[
20x_2=1.80
\]
\[
x_2=0.090\,\text{m}
\]
\(\textbf{Final answer:}\)
\[
\boxed{x_1=0.010\,\text{m},\qquad x_2=0.090\,\text{m}}
\]
The initial magnetic force partially supports the rod against gravity.
Reversing the current changes that same magnetic force into an additional downward load.
The spring must therefore extend farther to restore vertical equilibrium.
The rod's mass, spring constant and magnetic-force magnitude do not change between trials.
Only the magnetic-force direction changes, producing a large difference in the equilibrium extensions.
358. A straight conducting rod of mass \(0.10\,\text{kg}\) and length \(0.20\,\text{m}\) lies perpendicular to two horizontal conducting rails. Its current flows along positive \(y\), while a uniform magnetic field of magnitude \(0.50\,\text{T}\) points along positive \(z\).
The rod can move along the rails in the \(x\)-direction. The coefficient of static friction is \(0.30\), and the coefficient of kinetic friction is \(0.20\). Take \(g=10\,\text{m s}^{-2}\).
Two independent experiments start with the rod at rest.
Experiment P: Current \(4.0\,\text{A}\) is maintained through the rod.
Experiment Q: Current \(2.0\,\text{A}\) is maintained through the rod.
Ignore electromagnetic induction and any changes in current during motion.
What are the rod's initial motions?
ⓐ. In P, acceleration \(4.0\,\text{m s}^{-2}\) along positive \(x\); in Q, acceleration \(2.0\,\text{m s}^{-2}\).
ⓑ. In P, acceleration \(2.0\,\text{m s}^{-2}\) along positive \(x\); in Q, the rod remains at rest.
ⓒ. In P, acceleration \(1.0\,\text{m s}^{-2}\) along positive \(x\); in Q, the rod remains at rest.
ⓓ. In both experiments, the rod remains at rest because static friction always balances magnetic force.
Correct Answer: In P, acceleration \(2.0\,\text{m s}^{-2}\) along positive \(x\); in Q, the rod remains at rest.
Explanation: \(\textbf{Determine the magnetic-force direction:}\)
The rod carries current along positive \(y\).
The magnetic field points along positive \(z\).
For a straight conductor,
\[
\vec F_B=I(\vec L\times\vec B)
\]
Since
\[
\hat j\times\hat k=\hat i
\]
the magnetic force acts along positive \(x\).
\(\textbf{Calculate the available friction forces:}\)
The normal reaction is
\[
N=mg
\]
\[
N=(0.10)(10)=1.0\,\text{N}
\]
The maximum static friction is
\[
f_{s,\max}=\mu_sN
\]
\[
f_{s,\max}=(0.30)(1.0)
\]
\[
f_{s,\max}=0.30\,\text{N}
\]
When the rod is sliding, the kinetic friction is
\[
f_k=\mu_kN
\]
\[
f_k=(0.20)(1.0)
\]
\[
f_k=0.20\,\text{N}
\]
\(\textbf{Experiment P — test whether motion begins:}\)
The magnetic-force magnitude is
\[
F_{B,P}=I_PLB
\]
\[
F_{B,P}=(4.0)(0.20)(0.50)
\]
\[
F_{B,P}=0.40\,\text{N}
\]
Because
\[
0.40\gt 0.30
\]
the magnetic force exceeds maximum static friction.
The rod begins moving along positive \(x\).
Once sliding begins, kinetic friction acts along negative \(x\).
The resultant force is
\[
F_{\mathrm{net},P}=0.40-0.20
\]
\[
F_{\mathrm{net},P}=0.20\,\text{N}
\]
Therefore,
\[
a_P=\frac{F_{\mathrm{net},P}}m
\]
\[
a_P=\frac{0.20}{0.10}
\]
\[
a_P=2.0\,\text{m s}^{-2}
\]
\(\textbf{Experiment Q — test static equilibrium:}\)
The magnetic force is
\[
F_{B,Q}=(2.0)(0.20)(0.50)
\]
\[
F_{B,Q}=0.20\,\text{N}
\]
This is smaller than maximum static friction.
Static friction can therefore balance the magnetic force without sliding.
The rod remains at rest.
\(\textbf{Final answer:}\)
\[
\boxed{a_P=+2.0\hat i\,\text{m s}^{-2},\qquad
a_Q=0}
\]
The magnetic force in Experiment P exceeds the threshold needed to initiate motion.
The subsequent acceleration is determined using kinetic friction, not maximum static friction.
In Experiment Q, the smaller magnetic force can be balanced by static friction.
The two trials therefore require different friction laws even though their field and conductor geometry are identical.
359. A uniform but unknown magnetic field is investigated using straight conducting rods. Each rod carries a steady current of \(2.0\,\text{A}\) and has a directed length of \(0.50\,\text{m}\). Only one rod is present during any trial.
| Trial | Directed length vector | Measured magnetic force |
| P | \(+0.50\hat i\,\text{m}\) | \((-0.50\hat j+0.40\hat k)\,\text{N}\) |
| Q | \(+0.50\hat j\,\text{m}\) | \((+0.50\hat i-0.30\hat k)\,\text{N}\) |
A third rod of the same current and length is then placed with its directed length along positive \(z\).
Which option correctly gives the magnetic-field vector and the predicted force on the third rod?
ⓐ. \(\vec B=(0.30\hat i+0.40\hat j+0.50\hat k)\,\text{T}\); force \((-0.40\hat i+0.30\hat j)\,\text{N}\)
ⓑ. \(\vec B=(-0.30\hat i-0.40\hat j+0.50\hat k)\,\text{T}\); force \((0.40\hat i-0.30\hat j)\,\text{N}\)
ⓒ. \(\vec B=(0.30\hat i+0.40\hat j+0.50\hat k)\,\text{T}\); force \((0.40\hat i-0.30\hat j)\,\text{N}\)
ⓓ. \(\vec B=(0.40\hat i+0.30\hat j+0.50\hat k)\,\text{T}\); force \((-0.30\hat i+0.40\hat j)\,\text{N}\)
Correct Answer: \(\vec B=(0.30\hat i+0.40\hat j+0.50\hat k)\,\text{T}\); force \((-0.40\hat i+0.30\hat j)\,\text{N}\)
Explanation: \(\textbf{Express the unknown field:}\)
Let
\[
\vec B=B_x\hat i+B_y\hat j+B_z\hat k
\]
The magnetic force on a straight conductor in a uniform field is
\[
\vec F=I(\vec L\times\vec B)
\]
Each test rod has
\[
I=2.0\,\text{A},\qquad L=0.50\,\text{m}
\]
Therefore,
\[
IL=1.0\,\text{A m}
\]
\(\textbf{Use the force measurement from Trial P:}\)
For the rod along positive \(x\),
\[
\vec F_P=(1.0\hat i)\times\vec B
\]
Expanding,
\[
\vec F_P=-B_z\hat j+B_y\hat k
\]
The measured force is
\[
\vec F_P=-0.50\hat j+0.40\hat k\,\text{N}
\]
Thus,
\[
B_z=0.50\,\text{T}
\]
\[
B_y=0.40\,\text{T}
\]
\(\textbf{Use the independent measurement from Trial Q:}\)
For the rod along positive \(y\),
\[
\vec F_Q=(1.0\hat j)\times\vec B
\]
\[
\vec F_Q=B_z\hat i-B_x\hat k
\]
The measured force is
\[
\vec F_Q=+0.50\hat i-0.30\hat k\,\text{N}
\]
Therefore,
\[
B_x=0.30\,\text{T}
\]
The measured \(x\)-component also confirms the previously obtained \(B_z=0.50\,\text{T}\).
Hence,
\[
\vec B=(0.30\hat i+0.40\hat j+0.50\hat k)\,\text{T}
\]
\(\textbf{Predict the force on the third rod:}\)
Its directed length is \(0.50\hat k\,\text{m}\).
Therefore,
\[
\vec F_R=(1.0\hat k)\times\vec B
\]
\[
\vec F_R=\hat k\times(0.30\hat i+0.40\hat j+0.50\hat k)
\]
Using
\[
\hat k\times\hat i=\hat j,\qquad
\hat k\times\hat j=-\hat i
\]
we obtain
\[
\vec F_R=-0.40\hat i+0.30\hat j\,\text{N}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec B=(0.30\hat i+0.40\hat j+0.50\hat k)\,\text{T},\qquad
\vec F_R=(-0.40\hat i+0.30\hat j)\,\text{N}}
\]
A single straight-rod force measurement cannot reveal the magnetic-field component parallel to that rod.
The second rod, oriented perpendicularly, supplies the missing information.
The agreement of the shared field component provides a consistency check between the two measurements.
The complete reconstructed field can then be used to predict forces on conductors having other orientations.
360. A straight conducting rod of length \(0.40\,\text{m}\) lies along the positive \(x\)-axis and carries current \(3.0\,\text{A}\) along positive \(x\). Its left end is at \(x=0\).
The rod consists of two equal \(0.20\,\text{m}\) halves. The left half, \(0\leq x\lt 0.20\,\text{m}\), is immersed in a uniform magnetic field \(0.20\hat k\,\text{T}\). The right half, \(0.20\lt x\leq0.40\,\text{m}\), is immersed in a uniform field \(0.60\hat k\,\text{T}\). The field changes abruptly at the midpoint. The rod is rigid, and the magnetic torque is evaluated about its left end.
What are the resultant magnetic-force vector, the torque about the left end, and the effective distance from that end at which the resultant force may be considered to act?
ⓐ. \(\vec F=-0.48\hat j\,\text{N}\), \(\vec\tau=-0.096\hat k\,\text{N m}\), distance \(0.20\,\text{m}\).
ⓑ. \(\vec F=-0.24\hat j\,\text{N}\), \(\vec\tau=-0.060\hat k\,\text{N m}\), distance \(0.25\,\text{m}\).
ⓒ. \(\vec F=+0.48\hat j\,\text{N}\), \(\vec\tau=+0.12\hat k\,\text{N m}\), distance \(0.25\,\text{m}\).
ⓓ. \(\vec F=-0.48\hat j\,\text{N}\), \(\vec\tau=-0.12\hat k\,\text{N m}\), distance \(0.25\,\text{m}\).
Correct Answer: \(\vec F=-0.48\hat j\,\text{N}\), \(\vec\tau=-0.12\hat k\,\text{N m}\), distance \(0.25\,\text{m}\).
Explanation: \(\textbf{Determine the force directions on both halves:}\)
The rod carries current along positive \(x\).
Both magnetic fields point along positive \(z\).
For a straight current element,
\[
d\vec F=I(d\vec l\times\vec B)
\]
Using
\[
\hat i\times\hat k=-\hat j
\]
the magnetic force on each half points along negative \(y\).
\(\textbf{Calculate the force on the left half:}\)
The left-half length is
\[
L_1=0.20\,\text{m}
\]
Its magnetic field is
\[
B_1=0.20\,\text{T}
\]
The force magnitude is
\[
F_1=IL_1B_1
\]
\[
F_1=(3.0)(0.20)(0.20)
\]
\[
F_1=0.12\,\text{N}
\]
Therefore,
\[
\vec F_1=-0.12\hat j\,\text{N}
\]
\(\textbf{Calculate the force on the right half:}\)
The right-half length is also \(0.20\,\text{m}\), but its field is \(0.60\,\text{T}\).
Thus,
\[
F_2=(3.0)(0.20)(0.60)
\]
\[
F_2=0.36\,\text{N}
\]
\[
\vec F_2=-0.36\hat j\,\text{N}
\]
\(\textbf{Determine the complete force:}\)
\[
\vec F_{\mathrm{net}}=\vec F_1+\vec F_2
\]
\[
\vec F_{\mathrm{net}}=(-0.12-0.36)\hat j
\]
\[
\vec F_{\mathrm{net}}=-0.48\hat j\,\text{N}
\]
\(\textbf{Calculate the torque about the left end:}\)
Within each half, the magnetic force is uniformly distributed.
Its resultant may therefore be taken at that half's midpoint.
The left-half force acts at
\[
x_1=0.10\,\text{m}
\]
The right-half force acts at
\[
x_2=0.30\,\text{m}
\]
Both forces point along negative \(y\).
Therefore, both torques point along negative \(z\):
\[
\vec\tau_1=(0.10\hat i)\times(-0.12\hat j)
\]
\[
\vec\tau_1=-0.012\hat k\,\text{N m}
\]
and
\[
\vec\tau_2=(0.30\hat i)\times(-0.36\hat j)
\]
\[
\vec\tau_2=-0.108\hat k\,\text{N m}
\]
The total torque is
\[
\vec\tau_{\mathrm{net}}=\vec\tau_1+\vec\tau_2
\]
\[
\vec\tau_{\mathrm{net}}=-0.120\hat k\,\text{N m}
\]
\(\textbf{Locate the effective resultant force:}\)
Let the equivalent force act at distance \(x_{\mathrm{eff}}\) from the left end.
Equating torque magnitudes,
\[
F_{\mathrm{net}}x_{\mathrm{eff}}=|\tau_{\mathrm{net}}|
\]
Thus,
\[
x_{\mathrm{eff}}=\frac{0.120}{0.48}
\]
\[
x_{\mathrm{eff}}=0.25\,\text{m}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{net}}=-0.48\hat j\,\text{N},\qquad
\vec\tau_{\mathrm{net}}=-0.12\hat k\,\text{N m},\qquad
x_{\mathrm{eff}}=0.25\,\text{m}}
\]
Both halves contribute forces in the same direction, but the stronger field acts on the right half.
Consequently, the effective point of application lies to the right of the rod's geometrical midpoint.
The net magnetic force is obtained by adding the forces on the two halves.
The torque additionally depends on their different moment arms.
Treating the entire rod as if it were in a single uniform field would conceal the shift in the effective line of action.
361. A straight conducting rod of length \(0.50\,\text{m}\) carries a steady current of \(2.0\,\text{A}\). It is completely immersed in a uniform magnetic field
\[
\vec B=(0.40\hat j+0.60\hat k)\,\text{T}
\]
Initially, the current flows along positive \(x\). The rod is then rotated about its midpoint until the current flows along positive \(z\), without changing its current magnitude or length. The external magnetic field remains unchanged.
Which option correctly gives the magnetic-force vectors before and after rotation and the ratio of their magnitudes?
ⓐ. Initially \((-0.60\hat j+0.40\hat k)\,\text{N}\); finally \(-0.40\hat i\,\text{N}\); ratio \(F_{\mathrm{final}}/F_{\mathrm{initial}}=2/\sqrt{13}\).
ⓑ. Initially \((+0.60\hat j-0.40\hat k)\,\text{N}\); finally \(+0.40\hat i\,\text{N}\); ratio \(2/\sqrt{13}\).
ⓒ. Initially \((-0.60\hat j+0.40\hat k)\,\text{N}\); finally \(-0.60\hat i\,\text{N}\); ratio \(3/\sqrt{13}\).
ⓓ. Initially \((-0.60\hat j+0.40\hat k)\,\text{N}\); finally zero; ratio zero.
Correct Answer: Initially \((-0.60\hat j+0.40\hat k)\,\text{N}\); finally \(-0.40\hat i\,\text{N}\); ratio \(F_{\mathrm{final}}/F_{\mathrm{initial}}=2/\sqrt{13}\).
Explanation: \(\textbf{Determine the force in the original orientation:}\)
The magnetic force on a straight current-carrying conductor is
\[
\vec F=I(\vec L\times\vec B)
\]
The directed length vector initially points along positive \(x\):
\[
\vec L_1=0.50\hat i\,\text{m}
\]
Therefore,
\[
\vec F_1=2.0(0.50\hat i)\times(0.40\hat j+0.60\hat k)
\]
\[
\vec F_1=0.40(\hat i\times\hat j)+0.60(\hat i\times\hat k)
\]
Using
\[
\hat i\times\hat j=\hat k,\qquad
\hat i\times\hat k=-\hat j
\]
we obtain
\[
\vec F_1=-0.60\hat j+0.40\hat k\,\text{N}
\]
Its magnitude is
\[
F_1=\sqrt{(-0.60)^2+(0.40)^2}
\]
\[
F_1=\frac{\sqrt{13}}5\,\text{N}
\]
\(\textbf{Apply the change in conductor orientation:}\)
After rotation, the current flows along positive \(z\):
\[
\vec L_2=0.50\hat k\,\text{m}
\]
The magnetic field has not changed.
Thus,
\[
\vec F_2=2.0(0.50\hat k)\times(0.40\hat j+0.60\hat k)
\]
The component parallel to the conductor produces no magnetic force:
\[
\hat k\times\hat k=\vec0
\]
The remaining contribution is
\[
\vec F_2=0.40(\hat k\times\hat j)
\]
\[
\vec F_2=-0.40\hat i\,\text{N}
\]
\(\textbf{Compare the force magnitudes:}\)
\[
\frac{F_2}{F_1}=\frac{0.40}{\sqrt{13}/5}
\]
\[
\frac{F_2}{F_1}=\frac2{\sqrt{13}}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_1=(-0.60\hat j+0.40\hat k)\,\text{N},\quad
\vec F_2=-0.40\hat i\,\text{N},\quad
\frac{F_2}{F_1}=\frac2{\sqrt{13}}}
\]
Rotating the conductor changes the magnetic-field components perpendicular to the current.
In the original orientation, both field components contribute to the force.
In the final orientation, the \(z\)-component of the field is parallel to the current and contributes nothing.
The force direction and magnitude must therefore be recalculated using the cross product rather than by rotating the original force vector.
362. A conducting rod of mass \(0.20\,\text{kg}\) and length \(0.40\,\text{m}\) can slide without friction along two conducting rails fixed on a plane inclined at \(30^\circ\) to the horizontal. The rod remains perpendicular to the direction of the rails.
Let \(\hat s\) denote the unit vector up the inclined plane, \(\hat j\) the unit vector along the rod's initial current direction, and \(\hat n\) the outward unit normal to the plane. These directions satisfy \(\hat j\times\hat n=\hat s\). A uniform magnetic field of magnitude \(1.0\,\text{T}\) points along \(\hat n\). The rod carries a maintained current of \(5.0\,\text{A}\). In a second independent trial, the current is reversed without changing its magnitude. Take \(g=10\,\text{m s}^{-2}\), and neglect electromagnetic induction.
What are the initial accelerations along the rails in the two trials?
Positive acceleration means uphill.
ⓐ. \(+5.0\,\text{m s}^{-2}\) and \(-5.0\,\text{m s}^{-2}\).
ⓑ. \(+10\,\text{m s}^{-2}\) and \(-10\,\text{m s}^{-2}\).
ⓒ. \(+5.0\,\text{m s}^{-2}\) and \(-15\,\text{m s}^{-2}\).
ⓓ. \(+15\,\text{m s}^{-2}\) and \(-5.0\,\text{m s}^{-2}\).
Correct Answer: \(+5.0\,\text{m s}^{-2}\) and \(-15\,\text{m s}^{-2}\).
Explanation: \(\textbf{Resolve the gravitational force along the rails:}\)
The rod has mass
\[
m=0.20\,\text{kg}
\]
Its weight is
\[
mg=(0.20)(10)=2.0\,\text{N}
\]
The component of gravity parallel to the inclined plane is
\[
F_{g,s}=mg\sin30^\circ
\]
\[
F_{g,s}=2.0\left(\frac12\right)
\]
\[
F_{g,s}=1.0\,\text{N}
\]
This component acts downhill, along \(-\hat s\).
The normal reaction balances the component of gravity perpendicular to the rails and does not contribute to acceleration along them.
\(\textbf{Determine the original magnetic force:}\)
The rod is perpendicular to the magnetic field.
Therefore,
\[
F_B=ILB
\]
Substituting,
\[
F_B=(5.0)(0.40)(1.0)
\]
\[
F_B=2.0\,\text{N}
\]
The specified orientation gives
\[
\hat j\times\hat n=\hat s
\]
Thus, the magnetic force acts uphill.
\(\textbf{Calculate acceleration in the first trial:}\)
Taking uphill as positive,
\[
F_{\mathrm{net},1}=F_B-mg\sin30^\circ
\]
\[
F_{\mathrm{net},1}=2.0-1.0
\]
\[
F_{\mathrm{net},1}=+1.0\,\text{N}
\]
Newton's second law gives
\[
a_1=\frac{F_{\mathrm{net},1}}m
\]
\[
a_1=\frac{1.0}{0.20}
\]
\[
a_1=+5.0\,\text{m s}^{-2}
\]
\(\textbf{Reverse the current in the second trial:}\)
Current reversal reverses the magnetic force.
The magnetic force now points downhill, in the same direction as the component of gravity.
Therefore,
\[
F_{\mathrm{net},2}=-F_B-mg\sin30^\circ
\]
\[
F_{\mathrm{net},2}=-2.0-1.0
\]
\[
F_{\mathrm{net},2}=-3.0\,\text{N}
\]
The acceleration is
\[
a_2=\frac{-3.0}{0.20}
\]
\[
a_2=-15\,\text{m s}^{-2}
\]
\(\textbf{Final answer:}\)
\[
\boxed{a_1=+5.0\,\text{m s}^{-2},\qquad
a_2=-15\,\text{m s}^{-2}}
\]
The initial magnetic force acts uphill and exceeds the downhill gravitational component.
After current reversal, magnetic force and gravity reinforce in the downhill direction.
Consequently, the two acceleration magnitudes are not equal.
The force balance must be performed along the constrained direction of motion rather than using the full weight as the downhill force.
363. A conducting rod of mass \(0.20\,\text{kg}\) and length \(0.40\,\text{m}\) rests on a rough horizontal surface. It carries steady current \(5.0\,\text{A}\) along positive \(x\), and a uniform magnetic field \(0.50\hat j\,\text{T}\) is applied.
A horizontal external force of magnitude \(0.40\,\text{N}\) acts along positive \(y\). The coefficient of static friction is \(0.30\), while the coefficient of kinetic friction is \(0.20\). Take \(g=10\,\text{m s}^{-2}\).
The current is reversed in an independent trial, with all other conditions unchanged. Assume that the rod remains in contact with the surface in both trials.
Which statement correctly describes its initial motion?
ⓐ. With positive-\(x\) current, the rod remains at rest; with reversed current, it accelerates along positive \(y\).
ⓑ. With positive-\(x\) current, the rod accelerates at \(1.0\,\text{m s}^{-2}\) along positive \(y\); with reversed current, it remains at rest.
ⓒ. With positive-\(x\) current, the rod accelerates at \(2.0\,\text{m s}^{-2}\); with reversed current, its acceleration is \(1.0\,\text{m s}^{-2}\).
ⓓ. In both trials, the rod remains at rest because the magnetic force is perpendicular to the external horizontal force.
Correct Answer: With positive-\(x\) current, the rod accelerates at \(1.0\,\text{m s}^{-2}\) along positive \(y\); with reversed current, it remains at rest.
Explanation: \(\textbf{Determine the original magnetic-force direction:}\)
The force on the current-carrying rod is
\[
\vec F_B=I(\vec L\times\vec B)
\]
The current flows along positive \(x\), while the magnetic field points along positive \(y\).
Therefore,
\[
\hat i\times\hat j=\hat k
\]
The magnetic force acts vertically upward.
Its magnitude is
\[
F_B=ILB
\]
\[
F_B=(5.0)(0.40)(0.50)
\]
\[
F_B=1.0\,\text{N}
\]
\(\textbf{Determine the normal reaction in the first trial:}\)
The rod's weight is
\[
mg=(0.20)(10)=2.0\,\text{N}
\]
Vertical equilibrium requires
\[
N_1+F_B=mg
\]
Therefore,
\[
N_1=2.0-1.0
\]
\[
N_1=1.0\,\text{N}
\]
\(\textbf{Test whether static friction can prevent motion:}\)
The maximum static friction is
\[
f_{s,\max}=\mu_sN_1
\]
\[
f_{s,\max}=(0.30)(1.0)
\]
\[
f_{s,\max}=0.30\,\text{N}
\]
The applied horizontal force is \(0.40\,\text{N}\), which exceeds this limit.
Therefore, the rod begins moving along positive \(y\).
\(\textbf{Calculate its acceleration while sliding:}\)
Kinetic friction opposes the motion:
\[
f_k=\mu_kN_1
\]
\[
f_k=(0.20)(1.0)
\]
\[
f_k=0.20\,\text{N}
\]
The horizontal resultant force is
\[
F_{\mathrm{net},1}=0.40-0.20
\]
\[
F_{\mathrm{net},1}=0.20\,\text{N}
\]
Thus,
\[
a_1=\frac{0.20}{0.20}
\]
\[
a_1=1.0\,\text{m s}^{-2}
\]
\(\textbf{Reassess the normal reaction after current reversal:}\)
Reversing current reverses the magnetic force, so it now acts vertically downward.
The normal reaction becomes
\[
N_2=mg+F_B
\]
\[
N_2=2.0+1.0
\]
\[
N_2=3.0\,\text{N}
\]
The maximum static friction becomes
\[
f'_{s,\max}=(0.30)(3.0)
\]
\[
f'_{s,\max}=0.90\,\text{N}
\]
This exceeds the horizontal applied force of \(0.40\,\text{N}\).
The rod therefore remains at rest in the second trial.
\(\textbf{Final answer:}\)
\[
\boxed{a_1=+1.0\hat j\,\text{m s}^{-2},\qquad a_2=0}
\]
The magnetic force has no horizontal component in either trial.
Nevertheless, it changes the normal reaction, which controls the available friction.
The upward magnetic force reduces friction and permits motion.
Current reversal increases the normal reaction and allows static friction to prevent motion.
This illustrates an indirect mechanical effect of magnetic force.
364. A conducting rod of total length \(0.80\,\text{m}\) lies along positive \(x\) and carries a steady current \(3.0\,\text{A}\) in that direction. It is progressively inserted into a region of uniform magnetic field \(B\hat k\), where \(B\gt 0\). The portion of the rod outside the field region experiences no magnetic force.
The horizontal axis represents the length \(d\) of the rod actually inside the magnetic-field region, measured in metres. The vertical axis represents the signed \(y\)-component of its resultant magnetic force, measured in newtons. The graph is a straight line through the origin with slope \(-0.60\,\text{N m}^{-1}\) until the complete rod is immersed. Beyond full immersion, the force becomes constant.
In a second trial, the current is reversed and reduced to \(2.0\,\text{A}\), while the exposed rod length is fixed at \(0.25\,\text{m}\).
What are the magnetic-field magnitude, the force when the original rod is fully immersed, and the force vector in the second trial?
ⓐ. \(B=0.20\,\text{T}\), full-immersion force \(-0.48\hat j\,\text{N}\), second-trial force \(+0.10\hat j\,\text{N}\).
ⓑ. \(B=0.20\,\text{T}\), full-immersion force \(-0.60\hat j\,\text{N}\), second-trial force \(+0.15\hat j\,\text{N}\).
ⓒ. \(B=0.30\,\text{T}\), full-immersion force \(-0.48\hat j\,\text{N}\), second-trial force \(+0.15\hat j\,\text{N}\).
ⓓ. \(B=0.20\,\text{T}\), full-immersion force \(-0.48\hat j\,\text{N}\), second-trial force \(-0.10\hat j\,\text{N}\).
Correct Answer: \(B=0.20\,\text{T}\), full-immersion force \(-0.48\hat j\,\text{N}\), second-trial force \(+0.10\hat j\,\text{N}\).
Explanation: \(\textbf{Relate the force graph to exposed conductor length:}\)
For a straight current-carrying segment in a uniform field,
\[
\vec F=I(\vec L\times\vec B)
\]
The current initially flows along positive \(x\), and the field points along positive \(z\).
Since
\[
\hat i\times\hat k=-\hat j
\]
the magnetic force points along negative \(y\).
Only the exposed length \(d\) experiences the field.
Therefore,
\[
F_y=-IBd
\]
This is a linear relation between force and exposed length.
\(\textbf{Use the measured graph slope:}\)
The slope is
\[
s=\frac{\Delta F_y}{\Delta d}=-IB
\]
Its measured value is
\[
s=-0.60\,\text{N m}^{-1}
\]
With \(I=3.0\,\text{A}\),
\[
-0.60=-(3.0)B
\]
Therefore,
\[
B=0.20\,\text{T}
\]
\(\textbf{Calculate the original full-immersion force:}\)
At complete immersion,
\[
d=0.80\,\text{m}
\]
Thus,
\[
F_{y,\mathrm{full}}=-(3.0)(0.20)(0.80)
\]
\[
F_{y,\mathrm{full}}=-0.48\,\text{N}
\]
Hence,
\[
\vec F_{\mathrm{full}}=-0.48\hat j\,\text{N}
\]
\(\textbf{Apply the second-trial changes:}\)
The current is reversed, so its directed length points along negative \(x\).
The current magnitude is now \(2.0\,\text{A}\).
The exposed length is
\[
d'=0.25\,\text{m}
\]
Therefore,
\[
\vec F'=2.0(-0.25\hat i)\times(0.20\hat k)
\]
\[
\vec F'=-0.10(\hat i\times\hat k)
\]
\[
\vec F'=+0.10\hat j\,\text{N}
\]
\(\textbf{Final answer:}\)
\[
\boxed{B=0.20\,\text{T},\qquad
\vec F_{\mathrm{full}}=-0.48\hat j\,\text{N},\qquad
\vec F'=+0.10\hat j\,\text{N}}
\]
The graph slope determines the product of current and magnetic-field magnitude.
The plateau begins only after the entire conductor is immersed.
In the second trial, both the exposed length and current differ from their original full-immersion values.
Current reversal also changes the force direction.
Using the total rod length instead of the exposed length would overestimate the second-trial force.
365. A straight metallic conductor carries conventional current along positive \(x\) while a uniform external magnetic field points along positive \(z\). The conductor is electrically neutral overall, and its mobile charge carriers are electrons.
Consider the following statements.
Statement I: The average electron drift velocity is along negative \(x\).
Statement II: The magnetic force on an individual drifting electron is directed along negative \(y\).
Statement III: The conductor can experience a macroscopic magnetic force along negative \(y\), even though its total electric charge is zero.
Statement IV: The magnetic forces on drifting electrons must be cancelled by equal magnetic forces on stationary positive lattice ions because the conductor is electrically neutral.
Which statements are correct?
ⓐ. I and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, II and III only
Correct Answer: I, II and III only
Explanation: Conventional current is defined in the direction in which positive charge would move.
In a metal, the mobile carriers are electrons, which have negative charge.
Their average drift direction is therefore opposite to the direction of conventional current.
Since the conventional current is along positive \(x\), the electron drift velocity is along negative \(x\).
Statement I is correct.
The magnetic force on an individual charged carrier is
\[
\vec F=q(\vec v\times\vec B)
\]
For an electron, the charge is negative.
Its drift velocity points along negative \(x\), while the magnetic field points along positive \(z\).
The cross product of these two directions points along positive \(y\).
Multiplication by the negative electron charge reverses the force direction to negative \(y\).
Statement II is correct.
The macroscopic magnetic force on the current-carrying conductor is
\[
\vec F=I(\vec L\times\vec B)
\]
For conventional current along positive \(x\) and field along positive \(z\), this force points along negative \(y\).
Statement III is correct.
Electrical neutrality does not imply that a conductor carries zero current.
Nor does it imply cancellation of all magnetic forces associated with moving charges.
The positive lattice ions are approximately stationary in the conductor's frame and do not have the electron drift velocity.
They therefore do not experience an equal and opposite magnetic Lorentz force merely because the conductor is neutral.
Statement IV is incorrect.
Interactions between the mobile carriers and the lattice allow the electromagnetic action on charge carriers to be transmitted to the conductor as a whole.
The direction obtained from the microscopic electron-force calculation agrees with the macroscopic current-element force law.
This agreement depends on treating both the electron charge sign and its drift direction correctly.
366. A thin conductor carrying a steady current of \(5.0\,\text{A}\) follows the path \(P\to Q\to R\), where
\[
P=(0,0,0),\qquad
Q=(0.30,0,0),\qquad
R=(0.30,0.40,0)
\]
and coordinates are in metres.
The segment PQ lies along positive \(x\) and is immersed entirely in a uniform field \(+0.20\hat k\,\text{T}\). The segment QR lies along positive \(y\) and is immersed entirely in a different uniform field \(-0.30\hat k\,\text{T}\). Fields outside the respective segment regions are negligible. Calculate the magnetic force on the bent conductor and its magnetic torque about P. Distant connecting leads are excluded.
Which option is correct?
ⓐ. Resultant force \((-0.60\hat i-0.30\hat j)\,\text{N}\); torque \(-0.075\hat k\,\text{N m}\).
ⓑ. Resultant force \((-0.60\hat i-0.30\hat j)\,\text{N}\); torque \(+0.075\hat k\,\text{N m}\).
ⓒ. Resultant force \((+0.60\hat i-0.30\hat j)\,\text{N}\); torque \(+0.165\hat k\,\text{N m}\).
ⓓ. Resultant force \((-0.30\hat i-0.60\hat j)\,\text{N}\); torque \(+0.075\hat k\,\text{N m}\).
Correct Answer: Resultant force \((-0.60\hat i-0.30\hat j)\,\text{N}\); torque \(+0.075\hat k\,\text{N m}\).
Explanation: \(\textbf{Determine the force on segment PQ:}\)
The directed length of PQ is
\[
\vec L_{PQ}=0.30\hat i\,\text{m}
\]
Its magnetic field is
\[
\vec B_{PQ}=0.20\hat k\,\text{T}
\]
Therefore,
\[
\vec F_{PQ}=I(\vec L_{PQ}\times\vec B_{PQ})
\]
\[
\vec F_{PQ}=5.0(0.30\hat i\times0.20\hat k)
\]
Using \(\hat i\times\hat k=-\hat j\),
\[
\vec F_{PQ}=-0.30\hat j\,\text{N}
\]
\(\textbf{Determine the force on segment QR:}\)
The directed length is
\[
\vec L_{QR}=0.40\hat j\,\text{m}
\]
Its field points along negative \(z\):
\[
\vec B_{QR}=-0.30\hat k\,\text{T}
\]
Thus,
\[
\vec F_{QR}=5.0(0.40\hat j\times-0.30\hat k)
\]
Since \(\hat j\times\hat k=\hat i\),
\[
\vec F_{QR}=-0.60\hat i\,\text{N}
\]
\(\textbf{Combine the two magnetic forces:}\)
\[
\vec F_{\mathrm{net}}=\vec F_{PQ}+\vec F_{QR}
\]
\[
\vec F_{\mathrm{net}}=(-0.60\hat i-0.30\hat j)\,\text{N}
\]
\(\textbf{Determine the torque of PQ about P:}\)
The field is uniform along PQ, so its resultant force acts at the segment midpoint.
The midpoint position relative to P is
\[
\vec r_1=0.15\hat i\,\text{m}
\]
Therefore,
\[
\vec\tau_1=\vec r_1\times\vec F_{PQ}
\]
\[
\vec\tau_1=(0.15\hat i)\times(-0.30\hat j)
\]
\[
\vec\tau_1=-0.045\hat k\,\text{N m}
\]
\(\textbf{Determine the torque of QR about P:}\)
The midpoint of QR is at
\[
\vec r_2=0.30\hat i+0.20\hat j\,\text{m}
\]
Thus,
\[
\vec\tau_2=\vec r_2\times\vec F_{QR}
\]
\[
\vec\tau_2=(0.30\hat i+0.20\hat j)\times(-0.60\hat i)
\]
The parallel \(x\)-components produce no torque.
The remaining contribution is
\[
\vec\tau_2=-0.12(\hat j\times\hat i)
\]
\[
\vec\tau_2=+0.12\hat k\,\text{N m}
\]
\(\textbf{Calculate the total torque:}\)
\[
\vec\tau_{\mathrm{net}}=\vec\tau_1+\vec\tau_2
\]
\[
\vec\tau_{\mathrm{net}}=(-0.045+0.120)\hat k
\]
\[
\vec\tau_{\mathrm{net}}=+0.075\hat k\,\text{N m}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{net}}=(-0.60\hat i-0.30\hat j)\,\text{N},\qquad
\vec\tau_P=+0.075\hat k\,\text{N m}}
\]
The two conductor segments lie in different magnetic fields, so their forces must be calculated separately.
The force on each uniform segment acts effectively at its midpoint.
Although both force vectors have negative Cartesian components, their moments about P have opposite signs.
The positive torque from QR exceeds the negative torque from PQ.
The resultant force alone is insufficient to determine the torque without the force locations.
367. A straight conductor carrying current \(I\) along positive \(x\) is immersed in a uniform magnetic field. Its initial field is
\[
\vec B_1=0.40\hat j\,\text{T}
\]
The current and conductor length are held fixed.
Four proposed magnetic-field modifications are considered separately:
Statement I: Replacing \(\vec B_1\) by \((100\hat i+0.40\hat j)\,\text{T}\) leaves the magnetic force unchanged.
Statement II: Replacing \(\vec B_1\) by \((100\hat i-0.40\hat j)\,\text{T}\) reverses the magnetic force without changing its magnitude.
Statement III: Replacing \(\vec B_1\) by \(100\hat i\,\text{T}\) makes the magnetic force zero.
Statement IV: The magnetic force must increase whenever the total magnetic-field magnitude increases.
Which statements are correct?
ⓐ. I, II and IV only
ⓑ. I, III and IV only
ⓒ. I, II and III only
ⓓ. II, III and IV only
Correct Answer: I, II and III only
Explanation: The magnetic force on a straight conducting segment is
\[
\vec F=I(\vec L\times\vec B)
\]
The directed conductor length is along positive \(x\).
Therefore, the force depends only on magnetic-field components perpendicular to positive \(x\).
A field component parallel to the conductor produces zero cross product.
Initially,
\[
\vec B_1=0.40\hat j
\]
The magnetic force points along positive \(z\) because \(\hat i\times\hat j=\hat k\).
In Statement I, the replacement field has a very large positive-\(x\) component.
However, the perpendicular \(y\)-component remains unchanged.
The new axial component produces no additional force, so the complete force is unchanged.
Statement I is correct.
In Statement II, the \(y\)-component reverses while retaining its magnitude.
The large positive-\(x\) component still produces no force.
Therefore, the force reverses without changing its magnitude.
Statement II is correct.
In Statement III, the replacement field is entirely parallel to the conductor.
The angle between current direction and field is zero.
The magnetic force therefore vanishes.
Statement III is correct.
Statement IV is incorrect because the force magnitude is
\[
F=ILB\sin\theta
\]
Increasing total field magnitude does not necessarily increase the perpendicular component \(B\sin\theta\).
A large parallel field can produce less magnetic force than a much smaller perpendicular field.
The interaction depends on both field magnitude and orientation.
Comparing only the numerical magnitudes of magnetic-field vectors can therefore lead to an incorrect force prediction.
368. A straight horizontal conducting rod is suspended from a rigid support by two identical vertical strings. The total upward force exerted by the strings is measured using a force sensor.
The rod has unknown mass \(m\), length \(0.40\,\text{m}\), and carries current of magnitude \(5.0\,\text{A}\). Its current initially flows along positive \(x\), while a uniform magnetic field of unknown magnitude \(B\) points along positive \(y\).
The measured combined string tension is \(6.0\,\text{N}\). When the current is reversed without changing its magnitude, the combined tension becomes \(10.0\,\text{N}\).
The rod remains stationary and horizontal in both trials. Take \(g=10\,\text{m s}^{-2}\).
What are the rod mass and magnetic-field magnitude?
ⓐ. \(m=0.80\,\text{kg}\), \(B=0.50\,\text{T}\).
ⓑ. \(m=0.80\,\text{kg}\), \(B=1.0\,\text{T}\).
ⓒ. \(m=1.0\,\text{kg}\), \(B=0.50\,\text{T}\).
ⓓ. \(m=0.60\,\text{kg}\), \(B=1.0\,\text{T}\).
Correct Answer: \(m=0.80\,\text{kg}\), \(B=1.0\,\text{T}\).
Explanation: \(\textbf{Identify the magnetic-force directions:}\)
Initially, the current flows along positive \(x\), and the magnetic field points along positive \(y\).
Because
\[
\hat i\times\hat j=\hat k
\]
the magnetic force initially acts vertically upward.
Its magnitude is
\[
F_B=ILB
\]
After current reversal, the same magnetic force acts vertically downward.
\(\textbf{Write the two equilibrium conditions:}\)
Let \(W=mg\) denote the rod's weight.
The initial combined string tension is
\[
T_1=6.0\,\text{N}
\]
Vertical equilibrium requires
\[
T_1+F_B=W
\]
Therefore,
\[
6.0+F_B=mg
\]
After reversing the current, the magnetic force is downward.
The new combined tension is
\[
T_2=10.0\,\text{N}
\]
The second equilibrium condition is
\[
T_2=W+F_B
\]
\[
10.0=mg+F_B
\]
\(\textbf{Recover the weight by combining the measurements:}\)
Rearrange the original relation:
\[
6.0=mg-F_B
\]
The second relation is
\[
10.0=mg+F_B
\]
Adding these equations,
\[
16.0=2mg
\]
\[
mg=8.0\,\text{N}
\]
Therefore,
\[
m=\frac{8.0}{10}
\]
\[
m=0.80\,\text{kg}
\]
\(\textbf{Determine the magnetic-force magnitude:}\)
Subtract the first tension equation from the second:
\[
10.0-6.0=2F_B
\]
\[
F_B=2.0\,\text{N}
\]
\(\textbf{Recover the unknown field:}\)
The rod is perpendicular to the magnetic field, so
\[
F_B=ILB
\]
Hence,
\[
B=\frac{F_B}{IL}
\]
Substituting,
\[
B=\frac{2.0}{(5.0)(0.40)}
\]
\[
B=1.0\,\text{T}
\]
\(\textbf{Final answer:}\)
\[
\boxed{m=0.80\,\text{kg},\qquad B=1.0\,\text{T}}
\]
The two tension readings contain both gravitational and magnetic contributions.
Current reversal changes the sign of the magnetic force while leaving the weight unchanged.
Adding the equilibrium equations isolates the weight.
Subtracting them isolates the magnetic force.
The measured tension difference is twice the magnetic-force magnitude, not the magnetic-force magnitude itself.
369. A rigid horizontal conducting rod of length \(0.80\,\text{m}\) and mass \(0.20\,\text{kg}\) is suspended by two vertical strings attached at its left and right ends. The rod carries current \(2.0\,\text{A}\) along positive \(x\).
The rod extends from \(x=0\) to \(x=0.80\,\text{m}\). Its centre of mass is at \(x=0.40\,\text{m}\). Only its right-hand half, \(0.40\leq x\leq0.80\,\text{m}\), is immersed in a uniform magnetic field \(0.50\hat j\,\text{T}\). The left-hand half lies outside the field. The strings remain vertical, the rod remains horizontal, and \(g=10\,\text{m s}^{-2}\).
In a second equilibrium trial, the current is reversed without changing its magnitude. Let \(T_L,T_R\) denote the tensions in the left and right strings.
Which option gives the two pairs of string tensions correctly?
ⓐ. Initially \((T_L,T_R)=(0.80,0.80)\,\text{N}\); after reversal \((1.20,1.20)\,\text{N}\).
ⓑ. Initially \((T_L,T_R)=(0.70,0.90)\,\text{N}\); after reversal \((1.30,1.10)\,\text{N}\).
ⓒ. Initially \((T_L,T_R)=(0.90,0.70)\,\text{N}\); after reversal \((1.10,1.30)\,\text{N}\).
ⓓ. Initially \((T_L,T_R)=(1.10,0.50)\,\text{N}\); after reversal \((0.90,1.50)\,\text{N}\).
Correct Answer: Initially \((T_L,T_R)=(0.90,0.70)\,\text{N}\); after reversal \((1.10,1.30)\,\text{N}\).
Explanation: \(\textbf{Determine the magnetic force on the exposed portion:}\)
Only the right-hand half lies inside the magnetic field.
Its exposed length is
\[
L_B=0.40\,\text{m}
\]
The current flows along positive \(x\), and the field points along positive \(y\).
The force is therefore upward.
Its magnitude is
\[
F_B=IL_BB
\]
\[
F_B=(2.0)(0.40)(0.50)
\]
\[
F_B=0.40\,\text{N}
\]
The field is uniform over this half, so its distributed force has a resultant acting at the midpoint of the exposed portion:
\[
x_B=\frac{0.40+0.80}{2}
\]
\[
x_B=0.60\,\text{m}
\]
\(\textbf{Determine the rod's weight and its line of action:}\)
The weight is
\[
W=mg
\]
\[
W=(0.20)(10)
\]
\[
W=2.0\,\text{N}
\]
It acts downward at the centre of mass, \(x=0.40\,\text{m}\).
\(\textbf{Apply vertical equilibrium in the first trial:}\)
With the magnetic force upward,
\[
T_L+T_R+F_B=W
\]
Therefore,
\[
T_L+T_R=2.0-0.40
\]
\[
T_L+T_R=1.60\,\text{N}
\]
\(\textbf{Apply torque equilibrium about the left end:}\)
Taking anticlockwise torque as positive,
\[
(0.80)T_R+(0.60)(0.40)-(0.40)(2.0)=0
\]
\[
0.80T_R+0.24-0.80=0
\]
\[
0.80T_R=0.56
\]
\[
T_R=0.70\,\text{N}
\]
Therefore,
\[
T_L=1.60-0.70
\]
\[
T_L=0.90\,\text{N}
\]
\(\textbf{Reverse the current and recalculate the tensions:}\)
Current reversal changes the magnetic force to \(0.40\,\text{N}\) downward.
The vertical equilibrium condition becomes
\[
T'_L+T'_R=2.0+0.40
\]
\[
T'_L+T'_R=2.40\,\text{N}
\]
Taking torque about the left end,
\[
(0.80)T'_R-(0.60)(0.40)-(0.40)(2.0)=0
\]
\[
0.80T'_R=0.24+0.80
\]
\[
0.80T'_R=1.04
\]
\[
T'_R=1.30\,\text{N}
\]
Hence,
\[
T'_L=2.40-1.30
\]
\[
T'_L=1.10\,\text{N}
\]
\(\textbf{Final answer:}\)
\[
\boxed{(T_L,T_R)_{\mathrm{initial}}=(0.90,0.70)\,\text{N},\qquad
(T_L,T_R)_{\mathrm{reversed}}=(1.10,1.30)\,\text{N}}
\]
The magnetic force acts away from the rod's centre because only one half is exposed to the field.
It therefore changes both the total load carried by the strings and the distribution of that load.
In the first trial, the upward magnetic force reduces the right-hand string tension especially strongly.
After reversal, the magnetic force acts downward near the right end and increases the tension there.
Vertical force balance alone cannot determine the individual tensions; rotational equilibrium is also necessary.
370. A closed rectangular conducting loop lies in the \(xy\)-plane and carries current anticlockwise when viewed from positive \(z\). A uniform magnetic field \(B\hat k\), with \(B\gt 0\), is applied only to the right-hand half of the loop.
The rectangle extends from \(x=-a\) to \(x=+a\) and from \(y=-b\) to \(y=+b\), with \(a,b\gt 0\). Current flows along positive \(x\) on the lower side, positive \(y\) on the right side, negative \(x\) on the upper side, and negative \(y\) on the left side. The field is present only where \(x\gt 0\); elsewhere it is zero. The boundary \(x=0\) is idealised as negligibly thin.
Which statement correctly describes the resultant magnetic force on the loop and the effect of extending the same field uniformly over the entire loop?
ⓐ. Initially, the resultant force is \(+2IbB\hat i\); when the field covers the entire loop, the resultant force becomes zero.
ⓑ. Initially, the resultant force is zero because the current path is closed; extending the field does not change this.
ⓒ. Initially, the resultant force is \(-2IbB\hat i\); extending the field doubles its magnitude.
ⓓ. Initially, the resultant force is \(+2IaB\hat j\); extending the field reverses its direction.
Correct Answer: Initially, the resultant force is \(+2IbB\hat i\); when the field covers the entire loop, the resultant force becomes zero.
Explanation: \(\textbf{Identify which conductor portions experience magnetic force:}\)
The applied magnetic field occupies only the region \(x\gt 0\).
Therefore, the complete right vertical side is exposed.
Only the right halves of the upper and lower horizontal sides are exposed.
The left vertical side is outside the field.
\(\textbf{Determine the force on the exposed lower segment:}\)
Its directed length is
\[
\vec L_{\mathrm{lower}}=a\hat i
\]
The force is
\[
\vec F_{\mathrm{lower}}=I(a\hat i\times B\hat k)
\]
\[
\vec F_{\mathrm{lower}}=-IaB\hat j
\]
\(\textbf{Determine the force on the exposed upper segment:}\)
Current on the upper side flows towards negative \(x\).
Thus,
\[
\vec L_{\mathrm{upper}}=-a\hat i
\]
Therefore,
\[
\vec F_{\mathrm{upper}}=I(-a\hat i\times B\hat k)
\]
\[
\vec F_{\mathrm{upper}}=+IaB\hat j
\]
These two forces cancel.
\(\textbf{Determine the force on the right vertical side:}\)
The right side has length \(2b\), with current flowing along positive \(y\).
Therefore,
\[
\vec L_{\mathrm{right}}=2b\hat j
\]
Its force is
\[
\vec F_{\mathrm{right}}=I(2b\hat j\times B\hat k)
\]
Since
\[
\hat j\times\hat k=\hat i
\]
we obtain
\[
\vec F_{\mathrm{right}}=+2IbB\hat i
\]
\(\textbf{Determine the complete initial force:}\)
Adding the contributions,
\[
\vec F_{\mathrm{net}}
=\vec F_{\mathrm{lower}}+\vec F_{\mathrm{upper}}+\vec F_{\mathrm{right}}
\]
\[
\vec F_{\mathrm{net}}=+2IbB\hat i
\]
\(\textbf{Extend the field over the entire loop:}\)
When the same uniform field covers the left vertical side, that side experiences force
\[
\vec F_{\mathrm{left}}=-2IbB\hat i
\]
It cancels the right-side force.
The complete upper and lower sides also have equal and opposite forces.
Thus,
\[
\vec F_{\mathrm{net,uniform}}=\vec0
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{partial}}=+2IbB\hat i,\qquad
\vec F_{\mathrm{uniform}}=\vec0}
\]
A closed current loop has zero resultant magnetic force when the external magnetic field is uniform throughout the complete loop.
That conclusion does not generally hold when different portions experience different fields.
Here, the forces on the exposed horizontal segments cancel, but the right vertical side has no initially exposed left-side counterpart.
Extending the field to cover the entire loop restores the pairwise cancellation of forces.
371. A straight conducting rod of length \(L\) carries current \(I\) along positive \(x\). A uniform magnetic field of constant magnitude \(B\) is rotated within the \(yz\)-plane according to
\[
\vec B=B(\cos\alpha\,\hat j+\sin\alpha\,\hat k)
\]
where \(0^\circ\leq\alpha\leq90^\circ\).
The rod is considered both as a freely supported mechanical object under gravity and as a conductor on which the external magnetic force can be measured.
Consider the following statements.
Statement I: The magnetic-force magnitude remains \(ILB\) throughout the field rotation.
Statement II: The upward magnetic-force component decreases as \(\alpha\) increases from \(0^\circ\) to \(90^\circ\).
Statement III: For \(\alpha\gt 0^\circ\), the magnetic force has a component along negative \(y\).
Statement IV: Without any mechanical support or other external force, the magnetic force can exactly balance a vertically downward weight only at \(\alpha=0^\circ\), provided \(ILB=mg\).
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. I, II, III and IV
ⓓ. II, III and IV only
Correct Answer: I, II, III and IV
Explanation: The magnetic force on a straight conductor is
\[
\vec F=I(\vec L\times\vec B)
\]
The current direction is positive \(x\).
The magnetic field lies entirely in the \(yz\)-plane.
Therefore, the field remains perpendicular to the conductor for every allowed value of \(\alpha\).
The magnitude of the magnetic force is consequently \(ILB\), independent of \(\alpha\).
Statement I is correct.
The directed length vector is \(L\hat i\).
Taking the cross product,
\[
\vec F
=ILB[\cos\alpha(\hat i\times\hat j)+
\sin\alpha(\hat i\times\hat k)]
\]
Using the right-hand-rule relations,
\[
\vec F=ILB(\cos\alpha\,\hat k-\sin\alpha\,\hat j)
\]
The vertical magnetic-force component is
\[
F_z=ILB\cos\alpha
\]
This decreases from \(ILB\) to zero as the field rotates from positive \(y\) towards positive \(z\).
Statement II is correct.
The \(y\)-component is
\[
F_y=-ILB\sin\alpha
\]
It is directed along negative \(y\) whenever \(\alpha\gt 0^\circ\).
Statement III is correct.
A vertically downward weight has no horizontal component.
For magnetic force alone to balance that weight, its horizontal component must vanish.
Within the stated angular range, this requires \(\alpha=0^\circ\).
At that orientation, the magnetic force is vertically upward and can balance the weight if \(ILB=mg\).
Statement IV is correct.
The resultant magnetic-force magnitude is constant during the field rotation, but its direction changes.
A constant force magnitude does not imply a constant ability to support the conductor against gravity.
Both vector direction and magnitude must satisfy mechanical equilibrium.
372. A straight conductor of effective length \(0.50\,\text{m}\) carries an adjustable current \(I\) in a uniform magnetic field of unknown magnitude \(B\). The angle \(\theta\) between its current direction and the magnetic field can also be adjusted.
A force sensor measures the magnitude \(F\) of the magnetic force.
For the fixed orientation \(\theta=30^\circ\), a graph of \(F^2\), in \(\text{N}^2\), against \(I^2\), in \(\text{A}^2\), is a straight line through the origin. Its slope is \(0.16\,\text{N}^2\text{A}^{-2}\). The conductor is entirely within the field during every measurement.
The current is then set to \(3.0\,\text{A}\), and the conductor is rotated until it is perpendicular to the magnetic field.
What is \(B\), and what magnetic-force magnitude should the sensor then measure?
ⓐ. \(B=0.80\,\text{T}\), \(F=1.2\,\text{N}\).
ⓑ. \(B=1.6\,\text{T}\), \(F=1.2\,\text{N}\).
ⓒ. \(B=1.6\,\text{T}\), \(F=2.4\,\text{N}\).
ⓓ. \(B=3.2\,\text{T}\), \(F=4.8\,\text{N}\).
Correct Answer: \(B=1.6\,\text{T}\), \(F=2.4\,\text{N}\).
Explanation: \(\textbf{Relate the graph variables using the conductor-force law:}\)
The magnetic-force magnitude is
\[
F=ILB\sin\theta
\]
Squaring both sides,
\[
F^2=I^2L^2B^2\sin^2\theta
\]
At fixed conductor length, field magnitude and angle, this is a straight-line relation between \(F^2\) and \(I^2\).
Its slope is
\[
s=L^2B^2\sin^2\theta
\]
\(\textbf{Recover the field magnitude from the graph:}\)
The measured slope is
\[
s=0.16\,\text{N}^2\text{A}^{-2}
\]
Therefore,
\[
LB\sin\theta=\sqrt{s}
\]
\[
LB\sin\theta=0.40\,\text{N A}^{-1}
\]
The conductor length is
\[
L=0.50\,\text{m}
\]
The calibration orientation is
\[
\theta=30^\circ
\]
Thus,
\[
(0.50)B\sin30^\circ=0.40
\]
\[
(0.50)B\left(\frac12\right)=0.40
\]
\[
0.25B=0.40
\]
\[
B=1.6\,\text{T}
\]
\(\textbf{Apply the new perpendicular orientation:}\)
The conductor is now perpendicular to the field.
Therefore,
\[
\theta'=90^\circ
\]
\[
\sin\theta'=1
\]
The current is
\[
I'=3.0\,\text{A}
\]
The new force is
\[
F'=I'LB
\]
Substituting,
\[
F'=(3.0)(0.50)(1.6)
\]
\[
F'=2.4\,\text{N}
\]
\(\textbf{Final answer:}\)
\[
\boxed{B=1.6\,\text{T},\qquad F'=2.4\,\text{N}}
\]
The graph slope represents the square of the force per unit current at the calibration orientation.
Recovering the field requires taking the positive square root and accounting for the initial angle.
The new force must be calculated using the changed orientation, not by applying the original graph slope directly.
Rotating the conductor from \(30^\circ\) to \(90^\circ\) doubles the perpendicular component of the magnetic field relative to the current direction.
373. A straight horizontal conducting rod of length \(0.60\,\text{m}\) carries current \(4.0\,\text{A}\) along positive \(x\). The rod is hinged at its left end and lies in the \(xy\)-plane.
The rod extends from \(x=0\) to \(x=0.60\,\text{m}\). Its left half lies in a uniform magnetic field \(+0.50\hat k\,\text{T}\), while its right half lies in a uniform magnetic field \(-0.50\hat k\,\text{T}\). The fields are confined to their respective halves. The hinge permits rotation about the \(z\)-axis, and the magnetic torque is evaluated about the hinge.
The rod current is then reversed without changing its magnitude.
Which option correctly gives the resultant magnetic force and magnetic torque about the hinge before and after reversal?
ⓐ. Resultant force zero in both cases; initial torque \(+0.18\hat k\,\text{N m}\), final torque \(-0.18\hat k\,\text{N m}\).
ⓑ. Resultant force zero in both cases; magnetic torque zero in both cases.
ⓒ. Initial force \(+1.2\hat j\,\text{N}\), final force \(-1.2\hat j\,\text{N}\); torque zero.
ⓓ. Resultant force zero in both cases; initial torque \(-0.18\hat k\,\text{N m}\), final torque \(+0.18\hat k\,\text{N m}\).
Correct Answer: Resultant force zero in both cases; initial torque \(+0.18\hat k\,\text{N m}\), final torque \(-0.18\hat k\,\text{N m}\).
Explanation: \(\textbf{Determine the magnetic force on each half:}\)
Each half has length
\[
L_h=0.30\,\text{m}
\]
The current is initially along positive \(x\).
In the left half, the field points along positive \(z\).
Therefore,
\[
\vec F_L=I(0.30\hat i\times0.50\hat k)
\]
\[
\vec F_L=-0.60\hat j\,\text{N}
\]
In the right half, the field points along negative \(z\).
Thus,
\[
\vec F_R=I(0.30\hat i\times-0.50\hat k)
\]
\[
\vec F_R=+0.60\hat j\,\text{N}
\]
\(\textbf{Determine the resultant force:}\)
\[
\vec F_{\mathrm{net}}=\vec F_L+\vec F_R
\]
\[
\vec F_{\mathrm{net}}=(-0.60+0.60)\hat j
\]
\[
\vec F_{\mathrm{net}}=\vec0
\]
\(\textbf{Locate the two force resultants:}\)
Each magnetic field is uniform over its own half.
Therefore, the magnetic force on that half acts effectively at its midpoint.
The left-half midpoint is
\[
x_L=0.15\,\text{m}
\]
The right-half midpoint is
\[
x_R=0.45\,\text{m}
\]
\(\textbf{Calculate the torque from the left half:}\)
\[
\vec\tau_L=(0.15\hat i)\times(-0.60\hat j)
\]
\[
\vec\tau_L=-0.090\hat k\,\text{N m}
\]
\(\textbf{Calculate the torque from the right half:}\)
\[
\vec\tau_R=(0.45\hat i)\times(+0.60\hat j)
\]
\[
\vec\tau_R=+0.270\hat k\,\text{N m}
\]
\(\textbf{Determine the original net torque:}\)
\[
\vec\tau_{\mathrm{net}}=\vec\tau_L+\vec\tau_R
\]
\[
\vec\tau_{\mathrm{net}}=(-0.090+0.270)\hat k
\]
\[
\vec\tau_{\mathrm{net}}=+0.180\hat k\,\text{N m}
\]
\(\textbf{Apply current reversal:}\)
Reversing the current reverses the magnetic force on each half.
The two forces remain equal and opposite, so their resultant remains zero.
Both torque contributions also reverse direction.
Consequently,
\[
\vec\tau'_{\mathrm{net}}=-0.180\hat k\,\text{N m}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{net}}=\vec F'_{\mathrm{net}}=\vec0,\qquad
\vec\tau_{\mathrm{net}}=+0.18\hat k\,\text{N m},\qquad
\vec\tau'_{\mathrm{net}}=-0.18\hat k\,\text{N m}}
\]
The magnetic forces on the two halves cancel as vectors.
However, their different positions produce unequal torques about the hinge.
The forces form a couple, giving nonzero rotational action despite zero resultant force.
Reversing current reverses the sense of that couple.
This arrangement distinguishes translational magnetic-force balance from rotational magnetic equilibrium.
374. Two separate conducting paths connect the same pair of terminals \(P\) and \(Q\). Each path carries the same maintained current \(I\) from \(P\) to \(Q\).
The terminals are \(P=(0,0,0)\) and \(Q=(a,a,0)\), where \(a\gt 0\). Path A consists of two straight segments: \(P\to(a,0,0)\to Q\). Path B consists of two straight segments: \(P\to(0,a,0)\to Q\). The magnetic field in the region \(0\lt x\lt a,\ 0\lt y\lt a\) is uniform and points along positive \(z\). The field is also uniform at the positions of all path segments, and the connecting leads outside these paths are excluded.
A student argues that the two paths must experience different resultant magnetic forces because their intermediate segments point in different directions.
Which assessment is correct?
ⓐ. Path A experiences a force along positive \(x\), whereas Path B experiences a force along negative \(y\).
ⓑ. The two paths experience equal resultant forces \(IaB(\hat i-\hat j)\), although the forces on their individual segments differ.
ⓒ. Both paths experience zero force because they connect the same pair of terminals.
ⓓ. Their resultant forces have equal magnitudes but opposite directions.
Correct Answer: The two paths experience equal resultant forces \(IaB(\hat i-\hat j)\), although the forces on their individual segments differ.
Explanation: \(\textbf{Endpoint-displacement principle:}\)
The magnetic force on an infinitesimal conductor element is
\[
d\vec F=I(d\vec l\times\vec B)
\]
The total force on an open current path is
\[
\vec F=I\int_P^Q d\vec l\times\vec B
\]
The magnetic field is uniform over both paths.
It can therefore be taken outside the line integral:
\[
\vec F=I\left(\int_P^Q d\vec l\right)\times\vec B
\]
The vector integral of directed path elements equals the displacement from the starting terminal to the ending terminal.
For either path,
\[
\int_P^Qd\vec l=\vec r_Q-\vec r_P
\]
\[
\int_P^Qd\vec l=a\hat i+a\hat j
\]
Therefore,
\[
\vec F=I(a\hat i+a\hat j)\times B\hat k
\]
\[
\vec F=IaB[(\hat i\times\hat k)+(\hat j\times\hat k)]
\]
Using
\[
\hat i\times\hat k=-\hat j,\qquad
\hat j\times\hat k=\hat i
\]
we obtain
\[
\vec F=IaB(\hat i-\hat j)
\]
This result applies to both paths.
\(\textbf{Compare the force distributions:}\)
For Path A, the first horizontal segment experiences force along negative \(y\), while the second vertical segment experiences force along positive \(x\).
For Path B, the same two directional contributions arise in the opposite order.
The individual force locations differ between paths, but their resultant vectors are equal.
The statement that different conductor shapes necessarily imply different resultant magnetic forces is therefore incorrect in a uniform magnetic field.
If the field were nonuniform, the path shape could matter because the field could no longer be taken outside the integral.
Thus, the equality here depends on the shared endpoints, equal currents and uniform external field.
375. Two infinitely long parallel conducting wires lie along the \(z\)-axis direction. Their axes pass through
\[
P=(-d/2,0),\qquad Q=(+d/2,0)
\]
where \(d=0.020\,\text{m}\). Both wires carry current \(I=10\,\text{A}\) along positive \(z\).
A uniform external magnetic field \(B_e\hat j\), with \(B_e\gt 0\), is applied throughout the region. Assume that the external field is maintained independently and that the wires' own magnetic fields are calculated using the long-straight-wire approximation.
Take
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
The magnitude \(B_e\) is adjusted until the resultant magnetic force per unit length on wire P vanishes.
Which option correctly gives \(B_e\) and the resultant force per unit length on wire Q?
ⓐ. \(B_e=1.0\times10^{-4}\,\text{T}\); force \(+2.0\times10^{-3}\hat i\,\text{N m}^{-1}\).
ⓑ. \(B_e=2.0\times10^{-4}\,\text{T}\); force \(-2.0\times10^{-3}\hat i\,\text{N m}^{-1}\).
ⓒ. \(B_e=1.0\times10^{-4}\,\text{T}\); force zero on Q as well.
ⓓ. \(B_e=1.0\times10^{-4}\,\text{T}\); force \(-2.0\times10^{-3}\hat i\,\text{N m}^{-1}\).
Correct Answer: \(B_e=1.0\times10^{-4}\,\text{T}\); force \(-2.0\times10^{-3}\hat i\,\text{N m}^{-1}\).
Explanation: \(\textbf{Determine the mutual interaction between the wires:}\)
The two currents flow in the same direction.
Therefore, the wires attract.
The magnetic force per unit length between two long parallel wires is
\[
f_m=\frac{\mu_0I^2}{2\pi d}
\]
Substituting,
\[
f_m=(2.0\times10^{-7})\frac{(10)^2}{0.020}
\]
\[
f_m=(2.0\times10^{-7})(5000)
\]
\[
f_m=1.0\times10^{-3}\,\text{N m}^{-1}
\]
Wire P lies to the left of Q.
The mutual attraction on P therefore points along positive \(x\):
\[
\vec f_{P,\mathrm{mutual}}=+1.0\times10^{-3}\hat i\,\text{N m}^{-1}
\]
The mutual force on Q points along negative \(x\):
\[
\vec f_{Q,\mathrm{mutual}}=-1.0\times10^{-3}\hat i\,\text{N m}^{-1}
\]
\(\textbf{Determine the effect of the uniform external field:}\)
Both wires carry current along positive \(z\).
The external magnetic field points along positive \(y\).
Therefore,
\[
\hat k\times\hat j=-\hat i
\]
The external field produces a force along negative \(x\) on both wires.
Its magnitude per unit length is
\[
f_e=IB_e
\]
\(\textbf{Apply the zero-force condition on P:}\)
The external force on P must balance its attraction towards Q:
\[
IB_e=f_m
\]
Therefore,
\[
B_e=\frac{f_m}{I}
\]
Substituting,
\[
B_e=\frac{1.0\times10^{-3}}{10}
\]
\[
B_e=1.0\times10^{-4}\,\text{T}
\]
\(\textbf{Determine the resultant force on Q:}\)
The mutual attraction on Q points along negative \(x\).
The force due to the applied field also points along negative \(x\).
Therefore, they reinforce:
\[
\vec f_Q=\vec f_{Q,\mathrm{mutual}}+\vec f_{Q,\mathrm{external}}
\]
\[
\vec f_Q=(-1.0\times10^{-3}-1.0\times10^{-3})\hat i
\]
\[
\vec f_Q=-2.0\times10^{-3}\hat i\,\text{N m}^{-1}
\]
\(\textbf{Final answer:}\)
\[
\boxed{B_e=1.0\times10^{-4}\,\text{T},\qquad
\vec f_Q=-2.0\times10^{-3}\hat i\,\text{N m}^{-1}}
\]
The mutual magnetic forces between the two wires are equal and opposite.
The applied uniform field, however, produces forces in the same direction on both wires because their currents are parallel.
The applied field can therefore cancel the mutual force on one wire while reinforcing it on the other.
Zero force on wire P does not imply equilibrium of wire Q.
The distinction between mutual interactions and externally applied forces is essential to the result.
376. Four infinitely long parallel wires pass perpendicularly through the vertices of a square in the \(xy\)-plane. Their positions are \(P=(0,0)\), \(Q=(a,0)\), \(R=(0,a)\), and \(S=(a,a)\), where \(a\gt 0\). Initially, every wire carries the same current \(I\) along positive \(z\).
The current in wire S is then reversed without changing its magnitude, while the other three currents remain unchanged. Let
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
denote the attractive force per unit length between two wires carrying current \(I\) and separated by \(a\).
Which option correctly gives the magnetic-force vectors per unit length on wire P before and after the reversal?
ⓐ. Initially \(\frac32f_0(\hat i+\hat j)\); finally \(\frac12f_0(\hat i+\hat j)\).
ⓑ. Initially \(\frac32f_0(\hat i+\hat j)\); finally \(\frac32f_0(\hat i-\hat j)\).
ⓒ. Initially \(2f_0(\hat i+\hat j)\); finally \(f_0(\hat i+\hat j)\).
ⓓ. Initially \(\frac32f_0(\hat i+\hat j)\); finally \(\frac12f_0(\hat i-\hat j)\).
Correct Answer: Initially \(\frac32f_0(\hat i+\hat j)\); finally \(\frac12f_0(\hat i+\hat j)\).
Explanation: \(\textbf{Identify the pairwise interactions in the original arrangement:}\)
All four currents initially flow along positive \(z\).
Parallel wires carrying currents in the same direction attract.
Consequently, wire P experiences forces directed towards Q, R and S.
The force per unit length between sufficiently long parallel wires is
\[
f=\frac{\mu_0I_1I_2}{2\pi d}
\]
where the product of current magnitudes determines the force magnitude.
\(\textbf{Calculate the contributions from adjacent vertices:}\)
The distance from P to Q is \(a\).
Therefore,
\[
\vec f_{PQ}=f_0\hat i
\]
Similarly, the distance from P to R is \(a\), giving
\[
\vec f_{PR}=f_0\hat j
\]
\(\textbf{Resolve the diagonal-wire contribution:}\)
The distance from P to S is
\[
PS=\sqrt2a
\]
The force magnitude due to S is
\[
f_{PS}=\frac{\mu_0I^2}{2\pi\sqrt2a}
\]
\[
f_{PS}=\frac{f_0}{\sqrt2}
\]
Its direction is from P towards S:
\[
\hat u_{PS}=\frac{\hat i+\hat j}{\sqrt2}
\]
Thus,
\[
\vec f_{PS}=\frac{f_0}{\sqrt2}\frac{\hat i+\hat j}{\sqrt2}
\]
\[
\vec f_{PS}=\frac{f_0}{2}(\hat i+\hat j)
\]
\(\textbf{Combine the original forces:}\)
\[
\vec f_{P,1}=\vec f_{PQ}+\vec f_{PR}+\vec f_{PS}
\]
\[
\vec f_{P,1}=f_0\hat i+f_0\hat j+\frac{f_0}{2}(\hat i+\hat j)
\]
\[
\vec f_{P,1}=\frac32f_0(\hat i+\hat j)
\]
\(\textbf{Reverse the current at the diagonal vertex:}\)
After reversal, P and S carry oppositely directed currents.
They therefore repel instead of attracting.
The forces on P due to Q and R are unchanged.
The contribution from S reverses:
\[
\vec f'_{PS}=-\frac{f_0}{2}(\hat i+\hat j)
\]
Hence,
\[
\vec f_{P,2}=f_0\hat i+f_0\hat j-\frac{f_0}{2}(\hat i+\hat j)
\]
\[
\vec f_{P,2}=\frac12f_0(\hat i+\hat j)
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec f_{P,1}=\frac32f_0(\hat i+\hat j),\qquad
\vec f_{P,2}=\frac12f_0(\hat i+\hat j)}
\]
The diagonal interaction is weaker than either adjacent interaction because of the greater separation.
It must also be resolved along the coordinate axes.
Reversing the diagonal current decreases the net force magnitude to one-third of its original value but does not change its direction.
The two adjacent attractive forces still dominate the reversed diagonal contribution.
377. Three infinitely long parallel wires pass through \(P=(0,0)\), \(Q=(a,0)\), and \(R=(a,a)\), where \(a\gt 0\). Wire P carries current \(I\) along positive \(z\), and wire Q carries current \(3I\) along positive \(z\).
Wire R carries an adjustable current \(J\) along negative \(z\). Its magnitude is adjusted so that the resultant magnetic force per unit length on P is directed entirely along negative \(y\).
Define
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
What are the required current magnitude \(J\) and the resultant force per unit length on P?
ⓐ. \(J=3I\); force \(-\frac32f_0\hat j\).
ⓑ. \(J=6I\); force \(-3f_0\hat j\).
ⓒ. \(J=6I\); force \(+3f_0\hat j\).
ⓓ. \(J=12I\); force \(-6f_0\hat j\).
Correct Answer: \(J=6I\); force \(-3f_0\hat j\).
Explanation: \(\textbf{Determine the force exerted by Q on P:}\)
Wires P and Q carry currents in the same direction.
Therefore, they attract.
The distance between them is \(a\).
The magnitude of the force per unit length on P is
\[
f_{PQ}=\frac{\mu_0(I)(3I)}{2\pi a}
\]
\[
f_{PQ}=3f_0
\]
The force points from P towards Q, along positive \(x\):
\[
\vec f_{PQ}=3f_0\hat i
\]
\(\textbf{Resolve the repulsive interaction with R:}\)
Wire R carries current in the opposite direction to wire P.
Therefore, P is repelled away from R.
Their separation is
\[
PR=\sqrt{a^2+a^2}=\sqrt2a
\]
The interaction magnitude is
\[
f_{PR}=\frac{\mu_0IJ}{2\pi\sqrt2a}
\]
Expressing this in terms of \(f_0\),
\[
f_{PR}=\frac{J}{I}\frac{f_0}{\sqrt2}
\]
The unit vector directed from R towards P is
\[
\hat u_{RP}=-\frac{\hat i+\hat j}{\sqrt2}
\]
Therefore,
\[
\vec f_{PR}=-\frac{J}{I}\frac{f_0}{2}(\hat i+\hat j)
\]
\(\textbf{Impose the specified force direction:}\)
The total force on P is
\[
\vec f_P=3f_0\hat i-\frac{J}{2I}f_0(\hat i+\hat j)
\]
Collecting components,
\[
\vec f_P=f_0\left(3-\frac{J}{2I}\right)\hat i-\frac{J}{2I}f_0\hat j
\]
For the resultant to point entirely along \(y\), its \(x\)-component must vanish:
\[
3-\frac{J}{2I}=0
\]
\[
\frac{J}{2I}=3
\]
\[
J=6I
\]
\(\textbf{Determine the remaining component:}\)
Substitute \(J=6I\):
\[
\vec f_P=f_0(3-3)\hat i-3f_0\hat j
\]
\[
\vec f_P=-3f_0\hat j
\]
\(\textbf{Final answer:}\)
\[
\boxed{J=6I,\qquad\vec f_P=-3f_0\hat j}
\]
The force from Q acts entirely along positive \(x\).
The force from R has negative \(x\)- and negative \(y\)-components because its current opposes that in P.
Choosing the current in R can cancel the horizontal components while leaving a vertical force.
The cancellation condition concerns force components, not merely equality of the two force magnitudes.
378. Three infinitely long parallel wires pass through the vertices of an equilateral triangle of side \(a\), with coordinates
\[
P=(0,0),\quad Q=(a,0),\quad R=\left(\frac a2,\frac{\sqrt3a}{2}\right)
\]
Initially, wires P and Q carry current \(I\) along positive \(z\), while wire R carries current \(I\) along negative \(z\).
The current in R is then reversed, so that all three currents point along positive \(z\).
Let
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
Which statement correctly compares the magnetic force per unit length on P before and after reversal?
ⓐ. Its magnitude is initially \(f_0\), finally \(\sqrt3f_0\), and the two force vectors are perpendicular.
ⓑ. Its magnitude is initially \(\sqrt3f_0\), finally \(f_0\), and the two force vectors are perpendicular.
ⓒ. Its magnitude is initially \(f_0\), finally \(\sqrt3f_0\), and both forces point towards the triangle's interior.
ⓓ. Its magnitude remains \(f_0\), but its direction reverses.
Correct Answer: Its magnitude is initially \(f_0\), finally \(\sqrt3f_0\), and the two force vectors are perpendicular.
Explanation: \(\textbf{Determine the two original pairwise forces on P:}\)
The currents in P and Q initially have the same direction.
Their interaction is attractive, so Q exerts force on P along positive \(x\):
\[
\vec f_{PQ}=f_0\hat i
\]
The current in R is opposite to that in P.
Therefore, P is repelled away from R.
The vector from P towards R makes an angle of \(60^\circ\) with positive \(x\).
The repulsive force has the opposite direction:
\[
\vec f_{PR}=-f_0(\cos60^\circ\hat i+\sin60^\circ\hat j)
\]
Using the trigonometric values,
\[
\vec f_{PR}=-f_0\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)
\]
\(\textbf{Calculate the original resultant:}\)
\[
\vec f_{P,1}=\vec f_{PQ}+\vec f_{PR}
\]
\[
\vec f_{P,1}=f_0\hat i-f_0\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)
\]
\[
\vec f_{P,1}=f_0\left(\frac12\hat i-\frac{\sqrt3}{2}\hat j\right)
\]
Its magnitude is
\[
f_{P,1}=f_0\sqrt{\frac14+\frac34}
\]
\[
f_{P,1}=f_0
\]
\(\textbf{Reverse the current in R:}\)
After reversal, the currents in P and R have the same direction.
Their interaction becomes attractive.
The force from Q is unchanged.
Therefore,
\[
\vec f'_{PR}=f_0\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)
\]
The new resultant is
\[
\vec f_{P,2}=f_0\hat i+f_0\left(\frac12\hat i+\frac{\sqrt3}{2}\hat j\right)
\]
\[
\vec f_{P,2}=f_0\left(\frac32\hat i+\frac{\sqrt3}{2}\hat j\right)
\]
Its magnitude is
\[
f_{P,2}=f_0\sqrt{\frac94+\frac34}
\]
\[
f_{P,2}=\sqrt3f_0
\]
\(\textbf{Check the angle between the resultants:}\)
The scalar product is
\[
\vec f_{P,1}\cdot\vec f_{P,2}
=f_0^2\left(\frac12\cdot\frac32-\frac{\sqrt3}{2}\cdot\frac{\sqrt3}{2}\right)
\]
\[
\vec f_{P,1}\cdot\vec f_{P,2}=f_0^2\left(\frac34-\frac34\right)
\]
\[
\vec f_{P,1}\cdot\vec f_{P,2}=0
\]
The two nonzero force vectors are therefore perpendicular.
\(\textbf{Final answer:}\)
\[
\boxed{f_{P,1}=f_0,\qquad
f_{P,2}=\sqrt3f_0,\qquad
\vec f_{P,1}\cdot\vec f_{P,2}=0}
\]
Reversing one source current changes only its pairwise interaction with P.
However, the resultant force changes both magnitude and direction because the two contributions must be added vectorially.
The force initially points below positive \(x\), whereas the final force points above it.
The original and final directions differ by \(90^\circ\), not \(180^\circ\).
379. Four infinitely long parallel wires pass through \((a,0)\), \((-a,0)\), \((0,a)\), and \((0,-a)\), respectively. Initially, each outer wire carries current \(I\) along positive \(z\).
A fifth infinitely long wire passes through the origin and carries current \(I\) along positive \(z\).
The current in the outer wire at \((a,0)\) is then reversed without changing its magnitude. All other currents remain unchanged.
Define
\[
f_0=\frac{\mu_0I^2}{2\pi a},\qquad
b_0=\frac{\mu_0I}{2\pi a}
\]
Which option correctly gives the force per unit length on the central wire and the magnetic field at the origin due to the four outer wires after reversal?
ⓐ. Force \(-2f_0\hat i\); external field \(+2b_0\hat j\).
ⓑ. Force \(+2f_0\hat i\); external field \(-2b_0\hat j\).
ⓒ. Force \(-f_0\hat i\); external field \(+b_0\hat j\).
ⓓ. Force zero; external field \(+2b_0\hat j\).
Correct Answer: Force \(-2f_0\hat i\); external field \(+2b_0\hat j\).
Explanation: \(\textbf{Establish the original symmetry:}\)
Initially, the four outer currents are identical and point along positive \(z\).
The central wire also carries positive-\(z\) current.
Each outer wire attracts the central wire towards itself.
The forces from the two wires on the \(x\)-axis cancel.
The forces from the two wires on the \(y\)-axis also cancel.
Therefore,
\[
\vec f_{\mathrm{initial}}=\vec0
\]
The magnetic fields generated at the origin by the same opposite pairs also cancel:
\[
\vec B_{\mathrm{outer,initial}}=\vec0
\]
\(\textbf{Reverse the current of the right-hand outer wire:}\)
The wire at \((a,0)\) originally attracted the central wire towards positive \(x\).
Its contribution was
\[
\vec f_{\mathrm{right,initial}}=+f_0\hat i
\]
After current reversal, its interaction with the central wire becomes repulsive:
\[
\vec f_{\mathrm{right,final}}=-f_0\hat i
\]
The other three interaction forces are unchanged.
\(\textbf{Determine the new resultant force:}\)
The initial force sum was zero.
The only changed contribution is that of the right-hand outer wire.
Therefore,
\[
\vec f_{\mathrm{final}}
=\vec f_{\mathrm{initial}}
-\vec f_{\mathrm{right,initial}}
+\vec f_{\mathrm{right,final}}
\]
\[
\vec f_{\mathrm{final}}=0-f_0\hat i-f_0\hat i
\]
\[
\vec f_{\mathrm{final}}=-2f_0\hat i
\]
\(\textbf{Determine the change in magnetic field at the origin:}\)
Before reversal, the right-hand positive-\(z\) wire produced field along negative \(y\) at the origin:
\[
\vec B_{\mathrm{right,initial}}=-b_0\hat j
\]
After reversal, its magnetic field points along positive \(y\):
\[
\vec B_{\mathrm{right,final}}=+b_0\hat j
\]
The other three field contributions remain unchanged.
Consequently,
\[
\vec B_{\mathrm{outer,final}}
=0-(-b_0\hat j)+b_0\hat j
\]
\[
\vec B_{\mathrm{outer,final}}=+2b_0\hat j
\]
\(\textbf{Check the force direction from the field:}\)
The central wire carries current along positive \(z\):
\[
\vec f=I\hat k\times\vec B_{\mathrm{outer,final}}
\]
\[
\vec f=I\hat k\times(2b_0\hat j)
\]
Since \(\hat k\times\hat j=-\hat i\),
\[
\vec f=-2Ib_0\hat i=-2f_0\hat i
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec f=-2f_0\hat i,\qquad
\vec B_{\mathrm{outer}}(0)=+2b_0\hat j}
\]
The initial cancellation comes from the rotational symmetry of the four outer wires.
Reversing one outer current changes the sign of its contribution without changing its magnitude.
The resulting change in the total field is twice that original contribution.
The field and force calculations agree when the direction of the central current is included.
380. Two infinitely long parallel wires pass through \(P=(0,0)\) and \(Q=(5a,0)\), where \(a\gt 0\). Initially, P carries current \(I\) along positive \(z\), while Q carries current \(4I\) along positive \(z\).
A magnetic-field probe is moved along the \(x\)-axis to find a point where the resultant field due to the two wires is zero. The current in Q is then reversed without changing its magnitude.
Let
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
Which option correctly gives the positions of the zero-field points before and after reversal and the interaction force per unit length between the wires?
ⓐ. Initially \(x=4a\); finally \(x=-5a/3\); the interaction remains attractive with magnitude \(4f_0/5\).
ⓑ. Initially \(x=a\); finally \(x=5a/3\); the interaction changes from attraction to repulsion with doubled magnitude.
ⓒ. Initially \(x=a\); finally no zero-field point exists on the \(x\)-axis; the interaction magnitude remains \(4f_0/5\).
ⓓ. Initially \(x=a\); finally \(x=-5a/3\); the interaction changes from attraction to repulsion without changing its magnitude \(4f_0/5\).
Correct Answer: Initially \(x=a\); finally \(x=-5a/3\); the interaction changes from attraction to repulsion without changing its magnitude \(4f_0/5\).
Explanation: \(\textbf{Locate field cancellation before reversing current:}\)
For a long straight wire,
\[
B=\frac{\mu_0I}{2\pi r}
\]
The two currents initially point in the same direction.
Between the wires, their magnetic fields point in opposite directions.
At a point \(0\lt x\lt 5a\), their magnitudes are
\[
B_P=\frac{\mu_0I}{2\pi x}
\]
and
\[
B_Q=\frac{\mu_0(4I)}{2\pi(5a-x)}
\]
For cancellation,
\[
\frac{I}{x}=\frac{4I}{5a-x}
\]
Cancelling \(I\),
\[
5a-x=4x
\]
\[
x=a
\]
\(\textbf{Identify the cancellation region after reversal:}\)
After Q's current reverses, the two currents are opposite.
Their magnetic fields reinforce between the wires, so cancellation cannot occur there.
Outside the wires, their fields oppose.
Because P has the smaller current magnitude, the possible zero lies outside on P's side, where \(x\lt 0\).
\(\textbf{Solve for the new zero-field position:}\)
For \(x\lt 0\), the distances are
\[
r_P=-x,\qquad r_Q=5a-x
\]
The cancellation condition is
\[
\frac{I}{-x}=\frac{4I}{5a-x}
\]
Therefore,
\[
5a-x=-4x
\]
\[
5a=-3x
\]
\[
x=-\frac{5a}{3}
\]
\(\textbf{Determine the force between the two wires:}\)
Their separation remains \(5a\).
The force per unit length has magnitude
\[
f=\frac{\mu_0(I)(4I)}{2\pi(5a)}
\]
Using the definition of \(f_0\),
\[
f=\frac45f_0
\]
Initially, the same-direction currents attract.
After reversal, the opposite-direction currents repel.
The magnitude remains unchanged because the current magnitudes and separation are fixed.
\(\textbf{Final answer:}\)
\[
\boxed{x_{\mathrm{zero,initial}}=a,\qquad
x_{\mathrm{zero,final}}=-\frac{5a}{3},\qquad
f=\frac45f_0}
\]
The zero-field position depends on both current magnitudes and current directions.
For same-direction currents, cancellation occurs between the wires.
For opposite-direction unequal currents, cancellation occurs outside on the weaker-current side.
The interaction force, however, retains its magnitude when only one current direction is reversed.
The shift of a zero-field point must not be confused with a change in the distance between the wires.
381. An infinitely long straight wire lies along the \(y\)-axis and carries current \(I_w\) along positive \(y\). A rectangular current loop lies in the \(xy\)-plane, entirely to the right of the straight wire.
The loop extends from \(x=a\) to \(x=3a\), where \(a\gt 0\), and from \(y=0\) to \(y=L\). Its near vertical side is at \(x=a\), and its far vertical side is at \(x=3a\). Initially, the loop current \(I_\ell\) flows along positive \(y\) in the near side and negative \(y\) in the far side. The horizontal upper and lower sides complete the loop. Both currents are maintained constant, and all conductor dimensions are negligible compared with the specified separations.
Define
\[
F_0=\frac{\mu_0I_wI_\ell L}{2\pi a}
\]
The loop current is then reversed without changing its magnitude.
Which option correctly gives the resultant magnetic-force vectors on the loop before and after reversal?
ⓐ. Initially \(-F_0\hat i\); finally \(+F_0\hat i\).
ⓑ. Initially \(-\frac23F_0\hat i\); finally \(+\frac23F_0\hat i\).
ⓒ. Initially \(+\frac23F_0\hat i\); finally \(-\frac23F_0\hat i\).
ⓓ. Initially zero; finally zero because the loop is closed.
Correct Answer: Initially \(-\frac23F_0\hat i\); finally \(+\frac23F_0\hat i\).
Explanation: \(\textbf{Determine the field produced by the long straight wire:}\)
The magnetic field due to an infinitely long wire has magnitude
\[
B(r)=\frac{\mu_0I_w}{2\pi r}
\]
At points to the right of a wire carrying current along positive \(y\), the right-hand rule gives field along negative \(z\).
Therefore,
\[
\vec B(r)=-\frac{\mu_0I_w}{2\pi r}\hat k
\]
This field is stronger at the near side of the rectangular loop than at the far side.
\(\textbf{Calculate the interaction with the near side:}\)
The near side is at \(x=a\).
Its current flows along positive \(y\), parallel to the current in the straight wire.
Therefore, the two parallel current portions attract.
The force on the near side points towards the straight wire, along negative \(x\).
Its magnitude is
\[
F_{\mathrm{near}}=I_\ell LB(a)
\]
\[
F_{\mathrm{near}}=\frac{\mu_0I_wI_\ell L}{2\pi a}
\]
\[
F_{\mathrm{near}}=F_0
\]
Hence,
\[
\vec F_{\mathrm{near}}=-F_0\hat i
\]
\(\textbf{Calculate the interaction with the far side:}\)
The far side is at \(x=3a\), and its current flows along negative \(y\).
Its current is therefore opposite to the straight-wire current.
It is repelled away from the straight wire, along positive \(x\).
The magnetic field at that side is only one-third of its value at \(x=a\).
Consequently,
\[
F_{\mathrm{far}}=\frac{\mu_0I_wI_\ell L}{2\pi(3a)}
\]
\[
F_{\mathrm{far}}=\frac{F_0}{3}
\]
Thus,
\[
\vec F_{\mathrm{far}}=+\frac{F_0}{3}\hat i
\]
\(\textbf{Account for the horizontal sides:}\)
The magnetic forces on the horizontal segments act along opposite \(y\)-directions.
Each segment extends over the same range of distances from the long wire.
Corresponding elements of the two sides therefore experience equal-magnitude, opposite forces.
Their total contributions cancel.
\(\textbf{Determine the original resultant:}\)
\[
\vec F_1=\vec F_{\mathrm{near}}+\vec F_{\mathrm{far}}
\]
\[
\vec F_1=-F_0\hat i+\frac{F_0}{3}\hat i
\]
\[
\vec F_1=-\frac23F_0\hat i
\]
\(\textbf{Reverse the loop current:}\)
Current reversal changes the direction of magnetic force on every segment.
The field produced by the long straight wire is unchanged.
Therefore,
\[
\vec F_2=-\vec F_1
\]
\[
\vec F_2=+\frac23F_0\hat i
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_1=-\frac23F_0\hat i,\qquad
\vec F_2=+\frac23F_0\hat i}
\]
The near and far sides experience oppositely directed forces.
Their magnitudes differ because the magnetic field of the straight wire decreases with distance.
The forces on the horizontal sides cancel as a pair.
The complete loop therefore experiences a nonzero net force in this nonuniform magnetic field.
Reversing the loop current reverses that force while preserving its magnitude.
382. Two sufficiently long parallel conducting wires, P and Q, are separated by an unknown distance \(d\) in vacuum. They carry currents of magnitudes \(2.0\,\text{A}\) and \(3.0\,\text{A}\), respectively, in the same direction.
A force sensor measures the total magnetic force acting on a \(0.20\,\text{m}\) test length of P as \(6.0\,\mu\text{N}\).
A second sensor is attached to a \(0.50\,\text{m}\) test length of Q. Both test lengths lie well inside the long uniform interaction region, and their support forces are excluded from the magnetic-force readings.
Take
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
Which option correctly gives the wire separation and the magnetic-force reading on the test length of Q?
ⓐ. \(d=4.0\,\text{cm}\), force \(6.0\,\mu\text{N}\), opposite to the force on P.
ⓑ. \(d=4.0\,\text{cm}\), force \(15\,\mu\text{N}\), opposite to the force on P.
ⓒ. \(d=10\,\text{cm}\), force \(15\,\mu\text{N}\), in the same direction as the force on P.
ⓓ. \(d=4.0\,\text{cm}\), force \(15\,\mu\text{N}\), in the same direction as the force on P.
Correct Answer: \(d=4.0\,\text{cm}\), force \(15\,\mu\text{N}\), opposite to the force on P.
Explanation: \(\textbf{Recover the force per unit length from the first measurement:}\)
The measured force on P is
\[
F_P=6.0\times10^{-6}\,\text{N}
\]
The test length is
\[
L_P=0.20\,\text{m}
\]
Therefore, the interaction force per unit length is
\[
f=\frac{F_P}{L_P}
\]
\[
f=\frac{6.0\times10^{-6}}{0.20}
\]
\[
f=3.0\times10^{-5}\,\text{N m}^{-1}
\]
\(\textbf{Determine the separation using the parallel-wire relation:}\)
For two long parallel wires,
\[
f=\frac{\mu_0I_PI_Q}{2\pi d}
\]
Therefore,
\[
d=\frac{\mu_0I_PI_Q}{2\pi f}
\]
Substituting,
\[
d=\frac{(2.0\times10^{-7})(2.0)(3.0)}
{3.0\times10^{-5}}
\]
\[
d=\frac{1.2\times10^{-6}}{3.0\times10^{-5}}
\]
\[
d=0.040\,\text{m}
\]
\[
d=4.0\,\text{cm}
\]
\(\textbf{Predict the force on the longer test length of Q:}\)
For corresponding portions of sufficiently long parallel wires, the interaction forces per unit length have equal magnitudes and opposite directions.
Therefore, Q experiences the same force magnitude per unit length:
\[
f_Q=3.0\times10^{-5}\,\text{N m}^{-1}
\]
Its measured length is
\[
L_Q=0.50\,\text{m}
\]
Hence,
\[
F_Q=f_QL_Q
\]
\[
F_Q=(3.0\times10^{-5})(0.50)
\]
\[
F_Q=1.5\times10^{-5}\,\text{N}
\]
\[
F_Q=15\,\mu\text{N}
\]
\(\textbf{Determine the interaction directions:}\)
The currents are parallel and in the same direction.
Therefore, the wires attract.
The force on P points towards Q, while the force on Q points towards P.
These directions are opposite.
\(\textbf{Final answer:}\)
\[
\boxed{d=4.0\,\text{cm},\qquad F_Q=15\,\mu\text{N}}
\]
The two sensors measure forces on different lengths of conductor.
Their total force readings are therefore not required to have equal magnitudes.
What is equal for the two long wires is the interaction force per unit length, with opposite directions.
Comparing unequal observation lengths without accounting for their lengths would misapply Newton's third law.
The predicted \(15\,\mu\text{N}\) reading is consistent with the same force density acting over a longer measured portion.
383. Three separate pairs of infinitely long parallel wires are arranged in vacuum. The magnitude and direction of each current, together with the wire separation, are shown below.
| Arrangement | Current in wire 1 | Current in wire 2 | Separation |
| P | \(1.0\,\text{A}\) along \(+z\) | \(1.0\,\text{A}\) along \(+z\) | \(1.0\,\text{m}\) |
| Q | \(2.0\,\text{A}\) along \(+z\) | \(0.50\,\text{A}\) along \(-z\) | \(1.0\,\text{m}\) |
| R | \(2.0\,\text{A}\) along \(+z\) | \(1.0\,\text{A}\) along \(+z\) | \(2.0\,\text{m}\) |
Assume sufficiently long, straight conductors of negligible cross-sectional dimensions, and take \(\mu_0/(2\pi)=2.0\times10^{-7}\,\text{N A}^{-2}\).
A student measures the magnetic interaction force on a \(0.50\,\text{m}\) length in each arrangement.
Which statement is correct?
ⓐ. P and Q have equal force magnitudes, but R has twice that magnitude.
ⓑ. All three force magnitudes are equal and all three pairs attract.
ⓒ. All three force magnitudes are equal; P and R attract, whereas Q repels.
ⓓ. Only P reproduces the historical reference force per unit length; Q and R cannot do so because neither has two \(1\,\text{A}\) currents.
Correct Answer: All three force magnitudes are equal; P and R attract, whereas Q repels.
Explanation: \(\textbf{Identify the quantity controlling the interaction magnitude:}\)
For two sufficiently long parallel wires,
\[
f=\frac FL=\frac{\mu_0|I_1I_2|}{2\pi d}
\]
The force per unit length depends on the product of current magnitudes divided by separation.
The direction is determined separately by whether the currents are parallel or antiparallel.
\(\textbf{Calculate the force density in arrangement P:}\)
\[
f_P=(2.0\times10^{-7})\frac{(1.0)(1.0)}{1.0}
\]
\[
f_P=2.0\times10^{-7}\,\text{N m}^{-1}
\]
The currents point in the same direction, so the interaction is attractive.
\(\textbf{Calculate the force density in arrangement Q:}\)
\[
f_Q=(2.0\times10^{-7})\frac{(2.0)(0.50)}{1.0}
\]
\[
f_Q=2.0\times10^{-7}\,\text{N m}^{-1}
\]
The two currents point in opposite directions, so this interaction is repulsive.
\(\textbf{Calculate the force density in arrangement R:}\)
\[
f_R=(2.0\times10^{-7})\frac{(2.0)(1.0)}{2.0}
\]
\[
f_R=2.0\times10^{-7}\,\text{N m}^{-1}
\]
Both currents point along positive \(z\), so the interaction is attractive.
\(\textbf{Determine the force on the measured length:}\)
The observation length in every arrangement is
\[
L=0.50\,\text{m}
\]
Therefore,
\[
F=fL
\]
\[
F=(2.0\times10^{-7})(0.50)
\]
\[
F=1.0\times10^{-7}\,\text{N}
\]
This magnitude is the same in all three arrangements.
\(\textbf{Final answer:}\)
\[
\boxed{f_P=f_Q=f_R=2.0\times10^{-7}\,\text{N m}^{-1},\qquad
F_P=F_Q=F_R=1.0\times10^{-7}\,\text{N}}
\]
The traditional force-based ampere reference uses two long, straight, parallel conductors carrying equal currents of \(1\,\text{A}\), separated by \(1\,\text{m}\) in vacuum.
Arrangement P reproduces that reference geometry directly.
However, other current products and separations can produce the same force per unit length.
The equality of measured force magnitudes does not imply identical currents or interaction directions.
The historical reference relation must also be distinguished from the current formal SI definition of the ampere.
384. Two long, straight, parallel conductors in vacuum carry equal unknown currents \(I\) in the same direction. Their separation is \(0.25\,\text{m}\), and their measured attractive force per unit length is
\[
3.2\times10^{-6}\,\text{N m}^{-1}
\]
The separation is then increased to \(1.0\,\text{m}\), without changing either current magnitude. Finally, the current in one conductor is reversed.
Use
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
Which statement correctly gives the current magnitude and the final interaction, while interpreting the historical ampere reference appropriately?
ⓐ. \(I=2.0\,\text{A}\); final interaction is repulsive with magnitude \(8.0\times10^{-7}\,\text{N m}^{-1}\), four times the traditional \(1\,\text{A}\), \(1\,\text{m}\) benchmark.
ⓑ. \(I=2.0\,\text{A}\); final interaction is attractive with magnitude \(8.0\times10^{-7}\,\text{N m}^{-1}\), four times the benchmark.
ⓒ. \(I=4.0\,\text{A}\); final interaction is repulsive with magnitude \(8.0\times10^{-7}\,\text{N m}^{-1}\), four times the benchmark.
ⓓ. \(I=2.0\,\text{A}\); final interaction is repulsive with magnitude \(2.0\times10^{-7}\,\text{N m}^{-1}\), identical to the benchmark.
Correct Answer: \(I=2.0\,\text{A}\); final interaction is repulsive with magnitude \(8.0\times10^{-7}\,\text{N m}^{-1}\), four times the traditional \(1\,\text{A}\), \(1\,\text{m}\) benchmark.
Explanation: \(\textbf{Infer the equal currents from the measured force density:}\)
For equal currents in two sufficiently long parallel wires,
\[
f=\frac{\mu_0I^2}{2\pi d}
\]
Rearranging,
\[
I^2=\frac{fd}{\mu_0/(2\pi)}
\]
Substitute the measured force per unit length and separation:
\[
I^2=\frac{(3.2\times10^{-6})(0.25)}
{2.0\times10^{-7}}
\]
\[
I^2=\frac{8.0\times10^{-7}}{2.0\times10^{-7}}
\]
\[
I^2=4.0\,\text{A}^2
\]
Therefore,
\[
I=2.0\,\text{A}
\]
\(\textbf{Apply the increased separation:}\)
The new separation is
\[
d'=1.0\,\text{m}
\]
The currents retain their magnitudes.
Thus,
\[
f'=\frac{\mu_0I^2}{2\pi d'}
\]
Substituting,
\[
f'=(2.0\times10^{-7})\frac{(2.0)^2}{1.0}
\]
\[
f'=8.0\times10^{-7}\,\text{N m}^{-1}
\]
\(\textbf{Determine the interaction after current reversal:}\)
Initially, both currents point in the same direction and attract.
Reversing one current makes the currents antiparallel.
They consequently repel.
The current magnitudes and separation remain unchanged during this reversal, so the force magnitude stays equal to \(f'\).
\(\textbf{Compare with the traditional force reference:}\)
The historical reference force per unit length for two parallel \(1\,\text{A}\) currents separated by \(1\,\text{m}\) in vacuum is
\[
f_{\mathrm{ref}}=2.0\times10^{-7}\,\text{N m}^{-1}
\]
Therefore,
\[
\frac{f'}{f_{\mathrm{ref}}}
=\frac{8.0\times10^{-7}}{2.0\times10^{-7}}
\]
\[
\frac{f'}{f_{\mathrm{ref}}}=4
\]
\(\textbf{Final answer:}\)
\[
\boxed{I=2.0\,\text{A},\qquad
f'=8.0\times10^{-7}\,\text{N m}^{-1}=4f_{\mathrm{ref}}}
\]
The inverse calculation first determines the current magnitude from the force measurement.
Increasing separation reduces the force per unit length without changing the current.
Reversing one current then changes attraction into repulsion without changing the force magnitude.
The traditional reference force provides a benchmark for interpreting the measurement.
It is not the present formal definition of the SI ampere, which is based on the fixed numerical value of the elementary charge.
385. Two infinitely long parallel wires pass through \(P=(0,0)\) and \(Q=(d,0)\), where \(d=0.010\,\text{m}\). Wire P carries current \(5.0\,\text{A}\) along positive \(z\), while wire Q carries current \(5.0\,\text{A}\) along negative \(z\).
A separately maintained, uniform external magnetic field is applied so that the resultant magnetic force per unit length on EACH wire is zero.
Take
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
Both wire currents are then reversed simultaneously, retaining their magnitudes. The external field remains unchanged.
Which option correctly gives the original external magnetic field and the resultant forces per unit length on P and Q after reversal?
ⓐ. External field \(+1.0\times10^{-4}\hat j\,\text{T}\); final forces \(\vec f_P=\vec f_Q=\vec0\).
ⓑ. External field \(-1.0\times10^{-4}\hat j\,\text{T}\); final forces \(\vec f_P=-1.0\times10^{-3}\hat i\) and \(\vec f_Q=+1.0\times10^{-3}\hat i\), in \(\text{N m}^{-1}\).
ⓒ. External field \(-1.0\times10^{-4}\hat j\,\text{T}\); final forces remain zero because both currents reverse.
ⓓ. External field \(+1.0\times10^{-4}\hat j\,\text{T}\); final forces \(\vec f_P=-1.0\times10^{-3}\hat i\) and \(\vec f_Q=+1.0\times10^{-3}\hat i\), in \(\text{N m}^{-1}\).
Correct Answer: External field \(-1.0\times10^{-4}\hat j\,\text{T}\); final forces \(\vec f_P=-1.0\times10^{-3}\hat i\) and \(\vec f_Q=+1.0\times10^{-3}\hat i\), in \(\text{N m}^{-1}\).
Explanation: \(\textbf{Determine the original mutual magnetic forces:}\)
The currents in P and Q point in opposite directions.
Therefore, the wires repel.
The force per unit length between them has magnitude
\[
f_m=\frac{\mu_0I^2}{2\pi d}
\]
Substituting,
\[
f_m=(2.0\times10^{-7})\frac{(5.0)^2}{0.010}
\]
\[
f_m=(2.0\times10^{-7})(2500)
\]
\[
f_m=5.0\times10^{-4}\,\text{N m}^{-1}
\]
Wire P lies to the left of Q, so repulsion pushes P along negative \(x\):
\[
\vec f_{P,m}=-f_m\hat i
\]
Wire Q is pushed along positive \(x\):
\[
\vec f_{Q,m}=+f_m\hat i
\]
\(\textbf{Determine the external field needed to balance P:}\)
The external magnetic force per unit length is
\[
\vec f_e=I\hat u_I\times\vec B_e
\]
Wire P carries positive-\(z\) current.
To balance its mutual force along negative \(x\), its external magnetic force must point along positive \(x\).
Because
\[
\hat k\times(-\hat j)=+\hat i
\]
the required external field points along negative \(y\).
Its magnitude satisfies
\[
IB_e=f_m
\]
Therefore,
\[
B_e=\frac{5.0\times10^{-4}}{5.0}
\]
\[
B_e=1.0\times10^{-4}\,\text{T}
\]
Hence,
\[
\vec B_e=-1.0\times10^{-4}\hat j\,\text{T}
\]
\(\textbf{Verify simultaneous equilibrium of Q:}\)
Wire Q carries negative-\(z\) current.
In the same negative-\(y\) external field,
\[
(-\hat k)\times(-\hat j)=-\hat i
\]
Thus, its external force points along negative \(x\), opposite to its mutual repulsion along positive \(x\).
Both wires are therefore in force equilibrium.
\(\textbf{Reverse both wire currents:}\)
Their currents remain antiparallel after reversal.
Consequently, they still repel with the same force magnitude \(f_m\).
However, the force due to the fixed external field reverses on each wire.
For P, the external force changes from \(+f_m\hat i\) to \(-f_m\hat i\).
It now reinforces the mutual repulsion:
\[
\vec f'_P=-f_m\hat i-f_m\hat i
\]
\[
\vec f'_P=-2f_m\hat i
\]
\[
\vec f'_P=-1.0\times10^{-3}\hat i\,\text{N m}^{-1}
\]
Similarly, the forces on Q reinforce along positive \(x\):
\[
\vec f'_Q=+2f_m\hat i
\]
\[
\vec f'_Q=+1.0\times10^{-3}\hat i\,\text{N m}^{-1}
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec B_e=-1.0\times10^{-4}\hat j\,\text{T},\quad
\vec f'_P=-1.0\times10^{-3}\hat i\,\text{N m}^{-1},\quad
\vec f'_Q=+1.0\times10^{-3}\hat i\,\text{N m}^{-1}}
\]
The original external field balances the mutual repulsion of both wires because their currents point in opposite directions.
Reversing both currents leaves their mutual repulsion unchanged.
However, it reverses their forces due to the independently maintained external field.
The previously balancing forces then reinforce, so both wires lose equilibrium.
The result depends on distinguishing mutual current–current interaction from the effect of an externally applied field.
386. Two long parallel conductors carry constant currents in the same direction. One conductor is fixed along the \(z\)-axis. The other conductor remains parallel to it but can move along the positive \(x\)-axis, at separation \(d\) from the fixed conductor.
A spring mechanism exerts a force per unit length on the movable conductor along positive \(x\), given by
\[
f_s=k(6a-d)
\]
for \(0\lt d\lt 6a\), where \(a\gt 0\) and \(k\gt 0\) is a constant with the appropriate units.
The magnetic attraction acts along negative \(x\) and has magnitude per unit length
\[
f_m=\frac{K}{d},\qquad K=\frac{\mu_0I_1I_2}{2\pi}
\]
The parameters satisfy
\[
\frac Kk=8a^2
\]
Assume frictionless one-dimensional motion, constant currents, and small displacements that do not change the spring-force law.
Which statement correctly describes the equilibrium separations and their stability against small displacements along \(x\)?
ⓐ. Equilibrium only at \(d=3a\), and it is stable.
ⓑ. Equilibria at \(d=2a\) and \(d=4a\); both are stable.
ⓒ. Equilibria at \(d=2a\) and \(d=4a\); \(2a\) is stable, while \(4a\) is unstable.
ⓓ. Equilibria at \(d=2a\) and \(d=4a\); \(2a\) is unstable, while \(4a\) is stable.
Correct Answer: Equilibria at \(d=2a\) and \(d=4a\); \(2a\) is unstable, while \(4a\) is stable.
Explanation: \(\textbf{Construct the resultant force along the allowed direction:}\)
The mechanical spring force points along positive \(x\):
\[
f_s=k(6a-d)
\]
The two parallel currents have the same direction, so their magnetic interaction is attractive.
The magnetic force on the movable conductor points towards the fixed conductor, along negative \(x\):
\[
f_m=\frac Kd
\]
Taking positive \(x\) as positive, the resultant force per unit length is
\[
f_{\mathrm{net}}(d)=k(6a-d)-\frac Kd
\]
\(\textbf{Determine the equilibrium condition:}\)
At equilibrium,
\[
f_{\mathrm{net}}(d)=0
\]
Therefore,
\[
k(6a-d)=\frac Kd
\]
Multiplying by \(d/k\),
\[
d(6a-d)=\frac Kk
\]
Using \(K/k=8a^2\),
\[
d(6a-d)=8a^2
\]
Expanding,
\[
6ad-d^2=8a^2
\]
\[
d^2-6ad+8a^2=0
\]
Factorising,
\[
(d-2a)(d-4a)=0
\]
Thus, the two equilibrium separations are
\[
d_1=2a,\qquad d_2=4a
\]
\(\textbf{Test stability by considering small displacements:}\)
A stable equilibrium requires the net force to oppose a small displacement from the equilibrium position.
Differentiate the net force with respect to separation:
\[
\frac{df_{\mathrm{net}}}{dd}=-k+\frac K{d^2}
\]
At \(d=2a\),
\[
\left.\frac{df_{\mathrm{net}}}{dd}\right|_{2a}
=-k+\frac{8ka^2}{4a^2}
\]
\[
\left.\frac{df_{\mathrm{net}}}{dd}\right|_{2a}=+k
\]
A small increase in separation therefore produces a positive net force, increasing the separation further.
A small decrease produces a force towards still smaller separation.
This equilibrium is unstable.
\(\textbf{Test the larger-separation equilibrium:}\)
At \(d=4a\),
\[
\left.\frac{df_{\mathrm{net}}}{dd}\right|_{4a}
=-k+\frac{8ka^2}{16a^2}
\]
\[
\left.\frac{df_{\mathrm{net}}}{dd}\right|_{4a}=-\frac k2
\]
A small increase in separation produces a negative force, pulling the wire back.
A small decrease produces a positive force, again tending to restore equilibrium.
This equilibrium is stable for the specified one-dimensional motion.
\(\textbf{Final answer:}\)
\[
\boxed{d_1=2a\ \text{(unstable)},\qquad
d_2=4a\ \text{(stable)}}
\]
The magnetic attraction becomes stronger as separation decreases.
The spring mechanism also changes its force with separation, but according to a different mathematical dependence.
Their force magnitudes can therefore balance at two distinct separations.
The existence of force balance does not, by itself, establish stability.
The restoring or destabilising response to a small displacement distinguishes the two equilibrium positions.
387. Two infinitely long parallel wires lie along positive \(z\) and are separated by \(4.0\,\text{cm}\). Wire P has unknown current \(I_P\gt 0\), and wire Q has unknown current \(I_Q\gt 0\). Their current directions are the same.
A magnetic-field probe placed at the position of Q measures a field of magnitude
\[
1.0\times10^{-4}\,\text{T}
\]
due to wire P alone.
An independent force measurement gives the attractive interaction force per unit length between the wires as
\[
6.0\times10^{-4}\,\text{N m}^{-1}
\]
Use
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{T m A}^{-1}
\]
Which option correctly gives both current magnitudes and the magnetic field at P due to Q alone?
ⓐ. \(I_P=6.0\,\text{A}\), \(I_Q=20\,\text{A}\); field \(1.0\times10^{-4}\,\text{T}\).
ⓑ. \(I_P=20\,\text{A}\), \(I_Q=6.0\,\text{A}\); field \(1.0\times10^{-4}\,\text{T}\).
ⓒ. \(I_P=20\,\text{A}\), \(I_Q=6.0\,\text{A}\); field \(3.0\times10^{-5}\,\text{T}\).
ⓓ. \(I_P=20\,\text{A}\), \(I_Q=3.0\,\text{A}\); field \(3.0\times10^{-5}\,\text{T}\).
Correct Answer: \(I_P=20\,\text{A}\), \(I_Q=6.0\,\text{A}\); field \(3.0\times10^{-5}\,\text{T}\).
Explanation: \(\textbf{Recover current in P from the field measurement:}\)
The magnetic field produced by a long straight wire at perpendicular distance \(d\) is
\[
B=\frac{\mu_0I}{2\pi d}
\]
The field measured at Q is due to P alone:
\[
B_{P\to Q}=1.0\times10^{-4}\,\text{T}
\]
The wire separation is
\[
d=4.0\,\text{cm}=0.040\,\text{m}
\]
Therefore,
\[
I_P=\frac{B_{P\to Q}d}{\mu_0/(2\pi)}
\]
Substituting,
\[
I_P=\frac{(1.0\times10^{-4})(0.040)}
{2.0\times10^{-7}}
\]
\[
I_P=\frac{4.0\times10^{-6}}{2.0\times10^{-7}}
\]
\[
I_P=20\,\text{A}
\]
\(\textbf{Determine current in Q from the interaction force:}\)
The force per unit length on Q due to P is
\[
f=I_QB_{P\to Q}
\]
This follows from the magnetic force law because the current direction is perpendicular to P's field at Q.
The measured force density is
\[
f=6.0\times10^{-4}\,\text{N m}^{-1}
\]
Thus,
\[
I_Q=\frac{f}{B_{P\to Q}}
\]
Substituting,
\[
I_Q=\frac{6.0\times10^{-4}}{1.0\times10^{-4}}
\]
\[
I_Q=6.0\,\text{A}
\]
\(\textbf{Determine the field produced by Q at P:}\)
The field magnitude due to Q at the position of P is
\[
B_{Q\to P}=\frac{\mu_0I_Q}{2\pi d}
\]
Substituting,
\[
B_{Q\to P}=(2.0\times10^{-7})\frac{6.0}{0.040}
\]
\[
B_{Q\to P}=3.0\times10^{-5}\,\text{T}
\]
\(\textbf{Check interaction-force consistency:}\)
The force density on P due to Q must have the same magnitude as that on Q due to P:
\[
f'=I_PB_{Q\to P}
\]
\[
f'=(20)(3.0\times10^{-5})
\]
\[
f'=6.0\times10^{-4}\,\text{N m}^{-1}
\]
The independent calculation agrees with the measurement.
\(\textbf{Final answer:}\)
\[
\boxed{I_P=20\,\text{A},\qquad
I_Q=6.0\,\text{A},\qquad
B_{Q\to P}=3.0\times10^{-5}\,\text{T}}
\]
The two wires produce unequal magnetic-field magnitudes at one another because their currents differ.
However, the forces they exert on one another have equal magnitudes per unit length.
The larger current experiences the smaller source field, while the smaller current experiences the larger source field.
Multiplying each field by the corresponding receiving-wire current gives the same interaction force density.
388. Three infinitely long straight wires, P, Q and R, are mutually parallel to the \(z\)-axis and carry nonzero currents. Their positions in the transverse \(xy\)-plane may be chosen freely, but no two wires coincide.
Only their mutual magnetic interactions are considered; external magnetic fields and nonmagnetic forces are absent.
Consider the following statements.
Statement I: If the three wire positions are noncollinear, the magnetic forces per unit length exerted by Q and R on P cannot cancel exactly.
Statement II: If the three wire positions are collinear, the resultant magnetic force per unit length on the middle wire can vanish for suitable nonzero source currents.
Statement III: If the force on P vanishes because the magnetic fields produced at P by Q and R cancel, reversing P's own current preserves its zero-force condition.
Statement IV: The vector sum of the mutual magnetic forces per unit length acting on all three wires is zero, regardless of whether the currents have the same or opposite directions.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, II, III and IV
Correct Answer: I, II, III and IV
Explanation: The magnetic interaction force between two sufficiently long parallel wires acts along the line joining their transverse positions.
Its direction is attractive for same-direction currents and repulsive for opposite-direction currents.
The force per unit length has nonzero magnitude whenever both currents are nonzero and their separation is finite.
For Statement I, suppose Q and R are not collinear with P.
The force on P due to Q acts along the line PQ.
The force on P due to R acts along the different line PR.
Two nonzero vectors can cancel exactly only when they have equal magnitudes and opposite directions.
Two forces acting along distinct, noncollinear lines cannot satisfy that condition.
Therefore, Statement I is correct.
For Statement II, suppose the wires lie along a common transverse straight line and P is the middle wire.
The two interaction forces on P can act in opposite directions.
By selecting suitable source-current magnitudes and separations, their magnitudes can be made equal.
Therefore, the middle wire can experience zero resultant force.
Statement II is correct.
For Statement III, the force on P can be written as
\[
\vec f_P=I_P\hat k\times\vec B_{\mathrm{external}}(P)
\]
with the signed current direction included appropriately.
Here, \(\vec B_{\mathrm{external}}(P)\) is the magnetic field produced by Q and R, excluding P's own field.
If those two source fields cancel, then
\[
\vec B_{\mathrm{external}}(P)=\vec0
\]
Reversing P's current cannot produce force in a zero external field.
Statement III is correct.
For Statement IV, each pair of interacting wires exerts equal-magnitude, opposite-direction forces per unit length on the two members of that pair.
Adding the forces over all three wires causes every pairwise interaction to cancel from the total vector sum.
This is true regardless of the signs of the currents.
Statement IV is therefore correct.
Zero resultant force on one wire does not mean its pairwise interactions are individually zero.
Likewise, zero total force on the complete group does not imply that every member of the group is in equilibrium.
These distinctions explain how local force cancellation and global pairwise force balance can coexist.
389. Three infinitely long parallel wires pass through the positions \((-a,0)\), \((0,0)\), and \((a,0)\), respectively, where \(a\gt 0\).
The two outer wires carry current \(I\) along positive \(z\). The middle wire carries current \(2I\) along negative \(z\).
Two closed Amperian paths lie in the transverse \(xy\)-plane. Path \(C_1\) encloses only the middle wire. Path \(C_2\) encloses all three wires. Both paths are traversed anticlockwise when viewed from positive \(z\).
Consider the following statements.
Statement I: The net magnetic force per unit length on the middle wire is zero, although each outer wire repels it.
Statement II: The circulation around \(C_1\) is \(-2\mu_0I\).
Statement III: The circulation around \(C_2\) is zero, even though the magnetic field need not vanish at every point of \(C_2\).
Statement IV: Reversing only the middle-wire current makes its net force nonzero because both interactions become attractive.
Which statements are correct?
ⓐ. I, II and III only
ⓑ. I, II and IV only
ⓒ. II, III and IV only
ⓓ. I, III and IV only
Correct Answer: I, II and III only
Explanation: The two outer wires are symmetrically positioned about the middle wire.
They carry equal currents in the same direction.
The middle wire carries current in the opposite direction, so it is repelled by each outer wire.
The repulsion from the left wire points towards positive \(x\).
The repulsion from the right wire points towards negative \(x\).
Because the source currents and separations are equal, these forces have equal magnitudes.
They cancel, making the resultant force on the middle wire zero.
Statement I is correct.
Ampere's circuital law is
\[
\oint_C\vec B\cdot d\vec l=\mu_0I_{\mathrm{enc}}
\]
The specified anticlockwise traversal corresponds to a positive-\(z\) surface normal.
Path \(C_1\) encloses only the middle wire, whose signed current is \(-2I\).
Therefore,
\[
\oint_{C_1}\vec B\cdot d\vec l=-2\mu_0I
\]
Statement II is correct.
Path \(C_2\) encloses all three currents.
The algebraic enclosed current is
\[
I_{\mathrm{enc},2}=I-2I+I
\]
\[
I_{\mathrm{enc},2}=0
\]
Its complete magnetic circulation is therefore zero.
However, Ampere's law does not require the magnetic field itself to vanish at every point of a path having zero algebraic enclosed current.
Statement III is correct.
If only the middle-wire current is reversed, all three currents point along positive \(z\).
The middle wire is then attracted towards both outer wires.
The leftward and rightward attractions are equal and continue to cancel.
Its net force remains zero.
Statement IV is incorrect.
Force cancellation arises from symmetry, not from whether the pairwise forces are attractive or repulsive.
The circulation conditions concern enclosed signed currents, whereas the force on the middle wire depends on the external field created by its neighbours.
These are related but distinct physical tests.
390. Two infinitely long parallel source wires are fixed at \((-a,0)\) and \((a,0)\), where \(a\gt 0\). Each carries current \(I\gt 0\) along positive \(z\).
A third infinitely long wire is constrained to remain parallel to them and can move only along the \(x\)-axis. It is initially at the midpoint \(x=0\) and carries a nonzero current of magnitude \(J\).
In Trial P, the middle-wire current points along positive \(z\). In Trial Q, it points along negative \(z\). No external magnetic fields or mechanical forces act along \(x\).
The middle wire is displaced a very small distance towards positive \(x\) and released from rest in each trial. Its displacement is small compared with \(a\).
Which statement correctly describes the force immediately after the displacement and the stability of the midpoint equilibrium?
ⓐ. In P, the force is towards negative \(x\) and equilibrium is stable; in Q, the force is towards positive \(x\) and equilibrium is unstable.
ⓑ. In both trials, the force vanishes because the two source currents are equal.
ⓒ. In P, the force is towards positive \(x\) and equilibrium is unstable; in Q, the force is towards negative \(x\) and equilibrium is stable for the constrained motion.
ⓓ. In both trials, the force points towards positive \(x\) because the right-hand source wire is closer.
Correct Answer: In P, the force is towards positive \(x\) and equilibrium is unstable; in Q, the force is towards negative \(x\) and equilibrium is stable for the constrained motion.
Explanation: \(\textbf{Establish the force balance at the exact midpoint:}\)
The two source wires carry identical currents and are equally distant from the midpoint.
Their magnetic-field contributions at \(x=0\) have equal magnitudes and opposite directions.
Therefore,
\[
\vec B_{\mathrm{sources}}(0)=\vec0
\]
The middle wire experiences zero resultant magnetic force at that position, regardless of its own current direction.
The midpoint is consequently an equilibrium position in both trials.
\(\textbf{Examine the effect of a small positive displacement:}\)
Let the middle wire move to \(x=\delta\), where
\[
0\lt \delta\ll a
\]
Its distance from the left source wire becomes
\[
d_L=a+\delta
\]
Its distance from the right source wire becomes
\[
d_R=a-\delta
\]
Thus, it is closer to the right-hand source wire.
\(\textbf{Compare interaction magnitudes:}\)
Define
\[
K=\frac{\mu_0IJ}{2\pi}
\]
The interaction magnitudes per unit length are
\[
f_L=\frac{K}{a+\delta}
\]
and
\[
f_R=\frac{K}{a-\delta}
\]
Because \(a-\delta\lt a+\delta\),
\[
f_R\gt f_L
\]
The nearer right-hand source wire therefore exerts the stronger pairwise interaction.
\(\textbf{Trial P — middle current parallel to both sources:}\)
All three currents point along positive \(z\).
The middle wire is attracted towards each source wire.
The left source pulls it towards negative \(x\), while the right source pulls it towards positive \(x\).
Since the right-hand attraction is stronger,
\[
f_{\mathrm{net},P}=f_R-f_L\gt 0
\]
The resultant force points along positive \(x\), in the same direction as the displacement.
The displacement therefore tends to increase.
The midpoint equilibrium is unstable for Trial P.
\(\textbf{Trial Q — middle current antiparallel to both sources:}\)
The middle wire now repels both source wires.
The left source pushes it towards positive \(x\).
The right source pushes it towards negative \(x\).
The stronger right-hand repulsion dominates:
\[
f_{\mathrm{net},Q}=f_L-f_R\lt 0
\]
The resultant force points towards negative \(x\), opposite to the displacement.
It therefore tends to restore the middle wire towards the midpoint.
The equilibrium is stable against the allowed small displacements along \(x\).
\(\textbf{Final answer:}\)
\[
\boxed{\text{Trial P: unstable, force along }+x;\qquad
\text{Trial Q: stable, force along }-x}
\]
The midpoint is an equilibrium position in both trials because the fields from the two source wires cancel there.
Stability depends on what happens after a small displacement, not merely on force balance at the original position.
For parallel currents, the nearer attractive source pulls the middle wire farther from equilibrium.
For antiparallel currents, the nearer repulsive source pushes it back.
The stated stability conclusion applies to motion constrained along the line joining the two source wires.
391. Two infinitely long parallel source wires pass through \(P=(-a,0)\) and \(Q=(a,0)\), where \(a\gt 0\). Both carry the same current \(I\) along positive \(z\).
A third wire passes through the origin and is free to undergo small displacements in the \(xy\)-plane while remaining parallel to the source wires. It carries current of magnitude \(J\).
Two independent arrangements are considered.
Arrangement A: The middle-wire current is along positive \(z\).
Arrangement B: The middle-wire current is along negative \(z\).
Only mutual magnetic forces act on the middle wire. Which statement correctly describes the stability of its equilibrium at the origin?
ⓐ. Arrangement A is stable for small displacements in every direction, whereas B is unstable.
ⓑ. Arrangement B is stable for small displacements in every direction, whereas A is unstable.
ⓒ. Both arrangements are unstable against some sufficiently small displacements within the \(xy\)-plane.
ⓓ. Both arrangements are stable because the source fields cancel at the origin.
Correct Answer: Both arrangements are unstable against some sufficiently small displacements within the \(xy\)-plane.
Explanation: At the origin, the two source wires are equally distant from the middle wire.
Their magnetic fields at that point have equal magnitudes and opposite directions.
Therefore, the resultant magnetic field at the middle wire is zero.
Its magnetic force consequently vanishes irrespective of its own current direction.
Thus, the origin is an equilibrium position in both arrangements.
However, equilibrium and stability are different properties.
Consider first a small displacement along positive \(x\).
The middle wire moves closer to the source at \(x=a\) and farther from the source at \(x=-a\).
In arrangement A, the currents are parallel, so the middle wire is attracted by both sources.
The closer source exerts the stronger attraction, pulling the middle wire farther along positive \(x\).
Arrangement A is therefore unstable against this displacement.
In arrangement B, the interactions are repulsive.
The closer right-hand source produces a stronger repulsion towards negative \(x\), restoring the middle wire towards the origin.
Arrangement B is stable against small displacements along \(x\).
Now consider a small displacement along positive \(y\).
Both source wires are then equally distant from the displaced middle wire.
In arrangement A, their horizontal force components cancel, while their vertical attractive components both point towards negative \(y\).
This is restoring.
In arrangement B, the repulsive vertical components both point along positive \(y\), increasing the displacement.
Arrangement B is therefore unstable against a transverse displacement along \(y\).
Hence, arrangement A is unstable along \(x\), while arrangement B is unstable along \(y\).
Neither arrangement is stable against every permitted small displacement in the plane.
The force cancellation at the origin is insufficient to establish two-dimensional stability.
392. Two infinitely long parallel wires P and Q pass through \(x=-0.050\,\text{m}\) and \(x=+0.050\,\text{m}\), respectively. Both carry unknown positive currents along \(+z\).
The attractive magnetic force per unit length between them is measured to be
\[
3.6\times10^{-5}\,\text{N m}^{-1}
\]
A probe at their midpoint measures the resultant magnetic field due to the two wires as
\[
\vec B_{\mathrm{mid}}=+1.2\times10^{-5}\hat j\,\text{T}
\]
Assume long, thin wires in vacuum and use
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
Which option correctly gives the currents in P and Q?
ⓐ. \(I_P=3.0\,\text{A},\ I_Q=6.0\,\text{A}\)
ⓑ. \(I_P=6.0\,\text{A},\ I_Q=3.0\,\text{A}\)
ⓒ. \(I_P=9.0\,\text{A},\ I_Q=2.0\,\text{A}\)
ⓓ. \(I_P=4.5\,\text{A},\ I_Q=4.0\,\text{A}\)
Correct Answer: \(I_P=6.0\,\text{A},\ I_Q=3.0\,\text{A}\)
Explanation: \(\textbf{Extract the current product from the interaction force:}\)
The separation between the wires is
\[
d=0.050+0.050=0.100\,\text{m}
\]
For two long parallel wires,
\[
f=\frac{\mu_0I_PI_Q}{2\pi d}
\]
Therefore,
\[
I_PI_Q=\frac{fd}{\mu_0/(2\pi)}
\]
Substituting,
\[
I_PI_Q=\frac{(3.6\times10^{-5})(0.100)}{2.0\times10^{-7}}
\]
\[
I_PI_Q=18\,\text{A}^2
\]
\(\textbf{Use the midpoint-field direction to obtain a second condition:}\)
The midpoint is \(0.050\,\text{m}\) from each wire.
For positive-\(z\) current, wire P produces magnetic field along positive \(y\) at the midpoint.
Wire Q produces magnetic field along negative \(y\) there.
Consequently,
\[
B_{\mathrm{mid},y}=\frac{\mu_0}{2\pi(0.050)}(I_P-I_Q)
\]
The measured signed field is positive:
\[
1.2\times10^{-5}=\frac{2.0\times10^{-7}}{0.050}(I_P-I_Q)
\]
\[
1.2\times10^{-5}=4.0\times10^{-6}(I_P-I_Q)
\]
Thus,
\[
I_P-I_Q=3.0\,\text{A}
\]
\(\textbf{Solve the simultaneous current conditions:}\)
The conditions are
\[
I_PI_Q=18,\qquad I_P-I_Q=3
\]
Write
\[
I_P=I_Q+3
\]
Substituting into the product,
\[
I_Q(I_Q+3)=18
\]
\[
I_Q^2+3I_Q-18=0
\]
\[
(I_Q+6)(I_Q-3)=0
\]
Both current magnitudes are positive, so
\[
I_Q=3.0\,\text{A}
\]
Therefore,
\[
I_P=6.0\,\text{A}
\]
\(\textbf{Check the measurements:}\)
The product \(6\times3=18\) reproduces the interaction force.
The difference \(6-3=3\) reproduces the positive-\(y\) midpoint field.
\(\textbf{Final answer:}\)
\[
\boxed{I_P=6.0\,\text{A},\qquad I_Q=3.0\,\text{A}}
\]
The interaction measurement determines the product of the currents, not their individual values.
The signed midpoint-field measurement supplies their difference and identifies which current is larger.
Both pieces of information are therefore necessary.
Using only the field magnitude without its direction would leave an ambiguity between interchanging the two currents.
393. Two infinitely long source wires lie along positive \(z\), passing through \((-a,0)\) and \((a,0)\), respectively. Each carries current \(I\gt 0\).
A third wire carries current \(J\gt 0\) along positive \(z\) and passes through \((0,y)\), where \(y\gt 0\). All three wires remain mutually parallel.
Define
\[
f_0=\frac{\mu_0IJ}{2\pi a}
\]
A force sensor measures the resultant magnetic force per unit length on the third wire.
Which statement correctly compares measurements at \(y=a/2\), \(y=a\), and \(y=2a\)?
ⓐ. The forces at \(a/2\) and \(2a\) are equal in magnitude, both directed towards negative \(y\); the force magnitude is greatest at \(y=a\).
ⓑ. The force decreases continuously with increasing \(y\), so it is greatest at \(a/2\).
ⓒ. The forces at \(a/2\) and \(2a\) are equal in magnitude, both directed towards positive \(y\); the force is smallest at \(y=a\).
ⓓ. The force vanishes at \(y=a\) because the two source currents are equal.
Correct Answer: The forces at \(a/2\) and \(2a\) are equal in magnitude, both directed towards negative \(y\); the force magnitude is greatest at \(y=a\).
Explanation: \(\textbf{Resolve the two magnetic attractions:}\)
All three currents flow in the same direction.
The upper wire is therefore attracted towards each source wire.
Its distance from either source is
\[
r=\sqrt{a^2+y^2}
\]
Each pairwise force per unit length has magnitude
\[
f_1=\frac{\mu_0IJ}{2\pi\sqrt{a^2+y^2}}
\]
The two horizontal force components cancel by symmetry.
Their vertical components reinforce towards negative \(y\).
For either interaction, the vertical projection factor is
\[
\frac{y}{\sqrt{a^2+y^2}}
\]
\(\textbf{Construct the resultant force:}\)
The total vertical force per unit length is
\[
f_y=-2f_1\frac{y}{\sqrt{a^2+y^2}}
\]
Substituting \(f_1\),
\[
f_y=-\frac{\mu_0IJ}{\pi}\frac{y}{a^2+y^2}
\]
Using \(f_0=\mu_0IJ/(2\pi a)\),
\[
f_y=-2f_0\frac{ay}{a^2+y^2}
\]
\(\textbf{Evaluate the two specified off-centre positions:}\)
At \(y=a/2\),
\[
f_y=-2f_0\frac{a(a/2)}{a^2+a^2/4}
\]
\[
f_y=-\frac45f_0
\]
At \(y=2a\),
\[
f_y=-2f_0\frac{a(2a)}{a^2+4a^2}
\]
\[
f_y=-\frac45f_0
\]
Thus, both positions give equal downward forces.
\(\textbf{Identify the position of greatest magnitude:}\)
The force magnitude is proportional to
\[
\frac{2ay}{a^2+y^2}
\]
Because
\[
a^2+y^2-2ay=(a-y)^2\geq0
\]
we have
\[
\frac{2ay}{a^2+y^2}\leq1
\]
Equality occurs at
\[
y=a
\]
Thus, the maximum force magnitude is \(f_0\).
\(\textbf{Final answer:}\)
\[
\boxed{\vec f(a/2)=\vec f(2a)=-\frac45f_0\hat j,\qquad
\vec f(a)=-f_0\hat j}
\]
Increasing \(y\) increases the vertical alignment of each attraction but also increases the separation from the source wires.
These effects compete.
The resultant therefore reaches a maximum at an intermediate height rather than decreasing monotonically.
The equal forces at \(a/2\) and \(2a\) arise from the symmetry of the expression under replacing \(y\) by \(a^2/y\).
394. Three infinitely long parallel wires pass through \(P=(0,0)\), \(Q=(a,0)\), and \(R=(0,2a)\), respectively, where \(a\gt 0\).
Wire P carries current \(I\) along positive \(z\).
Wire Q carries unknown current \(J\gt 0\) along positive \(z\), whereas wire R carries unknown current \(K\gt 0\) along negative \(z\).
A magnetic-force measurement on P gives
\[
\vec f_P=f_0(3\hat i-2\hat j)
\]
where
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
The current in wire R is then reversed without changing its magnitude, while P and Q remain unchanged.
Which option correctly gives \(J\), \(K\), and the new force per unit length on P?
ⓐ. \(J=3I,\ K=2I;\ \vec f'_P=f_0(3\hat i+2\hat j)\)
ⓑ. \(J=3I,\ K=4I;\ \vec f'_P=f_0(3\hat i+2\hat j)\)
ⓒ. \(J=4I,\ K=3I;\ \vec f'_P=f_0(4\hat i+3\hat j)\)
ⓓ. \(J=3I,\ K=4I;\ \vec f'_P=f_0(-3\hat i+2\hat j)\)
Correct Answer: \(J=3I,\ K=4I;\ \vec f'_P=f_0(3\hat i+2\hat j)\)
Explanation: \(\textbf{Identify the force directions on P:}\)
P and Q carry currents in the same direction.
Therefore, Q attracts P towards positive \(x\).
The P–Q separation is \(a\).
Thus,
\[
\vec f_{PQ}=\frac{\mu_0IJ}{2\pi a}\hat i
\]
Expressing this in terms of \(f_0\),
\[
\vec f_{PQ}=\frac JI f_0\hat i
\]
P and R carry oppositely directed currents.
Therefore, R repels P away from its position at \((0,2a)\).
This force points along negative \(y\).
\(\textbf{Express the force due to R:}\)
The P–R separation is \(2a\).
Therefore,
\[
\vec f_{PR}=-\frac{\mu_0IK}{2\pi(2a)}\hat j
\]
\[
\vec f_{PR}=-\frac K{2I}f_0\hat j
\]
\(\textbf{Recover the unknown currents:}\)
The measured resultant is
\[
\vec f_P=f_0(3\hat i-2\hat j)
\]
But pairwise superposition gives
\[
\vec f_P=f_0\left(\frac JI\hat i-\frac K{2I}\hat j\right)
\]
Equating the \(x\)-components,
\[
\frac JI=3
\]
\[
J=3I
\]
Equating the \(y\)-components,
\[
\frac K{2I}=2
\]
\[
K=4I
\]
\(\textbf{Apply the changed current direction:}\)
Reversing R makes its current parallel to P's current.
Their interaction changes from repulsion to attraction.
Therefore, the force exerted by R on P changes from negative \(y\) to positive \(y\), without changing magnitude.
The contribution from Q remains unchanged.
Thus,
\[
\vec f'_P=3f_0\hat i+2f_0\hat j
\]
\[
\vec f'_P=f_0(3\hat i+2\hat j)
\]
\(\textbf{Final answer:}\)
\[
\boxed{J=3I,\qquad K=4I,\qquad
\vec f'_P=f_0(3\hat i+2\hat j)}
\]
The perpendicular geometry allows the unknown source currents to be inferred from independent force components.
The greater distance to R must be included when recovering its current.
Reversing R changes only its contribution to P's force.
It does not reverse the force due to Q or the complete resultant vector.
The new force has the same magnitude as the original but a different direction.
395. An infinitely long source wire P lies along positive \(z\) through the origin and carries an unknown current \(I_P\gt 0\). A test wire Q, also carrying current along positive \(z\), is kept parallel to P at a variable position \(x=d\gt 0\).
The test-wire current is maintained at \(I_Q=2.0\,\text{A}\).
An independently maintained uniform external magnetic field \(B_e\hat j\), where \(B_e\gt 0\), acts on Q as well as the field produced by P.
The horizontal axis represents reciprocal separation \(1/d\), measured in \(\text{m}^{-1}\). The vertical axis represents the signed \(x\)-component of the resultant magnetic force per unit length on Q, measured in \(\text{N m}^{-1}\). The graph is a straight line with slope \(-4.0\times10^{-6}\,\text{N}\) and vertical intercept \(-2.0\times10^{-4}\,\text{N m}^{-1}\).
Use \(\mu_0/(2\pi)=2.0\times10^{-7}\,\text{N A}^{-2}\).
Which option correctly gives \(I_P\), \(B_e\), and the force per unit length on Q when \(d=0.020\,\text{m}\)?
ⓐ. \(I_P=20\,\text{A},\ B_e=1.0\times10^{-4}\,\text{T};\ \vec f_Q=-4.0\times10^{-4}\hat i\,\text{N m}^{-1}\)
ⓑ. \(I_P=10\,\text{A},\ B_e=2.0\times10^{-4}\,\text{T};\ \vec f_Q=+4.0\times10^{-4}\hat i\,\text{N m}^{-1}\)
ⓒ. \(I_P=10\,\text{A},\ B_e=1.0\times10^{-4}\,\text{T};\ \vec f_Q=-4.0\times10^{-4}\hat i\,\text{N m}^{-1}\)
ⓓ. \(I_P=10\,\text{A},\ B_e=1.0\times10^{-4}\,\text{T};\ \vec f_Q=-2.0\times10^{-4}\hat i\,\text{N m}^{-1}\)
Correct Answer: \(I_P=10\,\text{A},\ B_e=1.0\times10^{-4}\,\text{T};\ \vec f_Q=-4.0\times10^{-4}\hat i\,\text{N m}^{-1}\)
Explanation: \(\textbf{Determine the magnetic-field direction at Q:}\)
The source current in P flows along positive \(z\).
At Q, which lies on the positive-\(x\) side, the source field points along positive \(y\).
Its magnitude is
\[
B_P(d)=\frac{\mu_0I_P}{2\pi d}
\]
The independently applied field also points along positive \(y\).
Therefore,
\[
\vec B_{\mathrm{net}}=\left(\frac{\mu_0I_P}{2\pi d}+B_e\right)\hat j
\]
\(\textbf{Construct the signed force relation:}\)
Wire Q carries current along positive \(z\).
Using
\[
\hat k\times\hat j=-\hat i
\]
its magnetic force points along negative \(x\):
\[
f_x=-I_Q\left(\frac{\mu_0I_P}{2\pi d}+B_e\right)
\]
Rearranging,
\[
f_x=-\frac{\mu_0I_PI_Q}{2\pi}\left(\frac1d\right)-I_QB_e
\]
This has the required straight-line form.
\(\textbf{Use the graph slope to recover the source current:}\)
The slope is
\[
s=-\frac{\mu_0I_PI_Q}{2\pi}
\]
Therefore,
\[
I_P=\frac{|s|}{[\mu_0/(2\pi)]I_Q}
\]
Substituting,
\[
I_P=\frac{4.0\times10^{-6}}{(2.0\times10^{-7})(2.0)}
\]
\[
I_P=10\,\text{A}
\]
\(\textbf{Use the intercept to recover the external field:}\)
The vertical intercept is
\[
c=-I_QB_e
\]
Hence,
\[
B_e=\frac{|c|}{I_Q}
\]
\[
B_e=\frac{2.0\times10^{-4}}{2.0}
\]
\[
B_e=1.0\times10^{-4}\,\text{T}
\]
\(\textbf{Predict the force at the specified separation:}\)
At \(d=0.020\,\text{m}\),
\[
f_x=-\frac{4.0\times10^{-6}}{0.020}-2.0\times10^{-4}
\]
\[
f_x=-2.0\times10^{-4}-2.0\times10^{-4}
\]
\[
f_x=-4.0\times10^{-4}\,\text{N m}^{-1}
\]
\(\textbf{Final answer:}\)
\[
\boxed{I_P=10\,\text{A},\qquad
B_e=1.0\times10^{-4}\,\text{T},\qquad
\vec f_Q=-4.0\times10^{-4}\hat i\,\text{N m}^{-1}}
\]
The inverse-separation dependence identifies the magnetic interaction between the two wires.
The constant graph intercept represents the force due to the independently maintained uniform field.
At the stated separation, the two force contributions reinforce.
Ignoring the intercept would underestimate the total magnetic force and obscure the external field.
396. Two sufficiently long parallel wires lie along the \(z\)-direction, with their transverse positions at \(x=-0.10\,\text{m}\) and \(x=+0.10\,\text{m}\).
The left wire carries \(5.0\,\text{A}\) along positive \(z\), while the right wire carries \(5.0\,\text{A}\) along negative \(z\).
A uniform external magnetic field \(0.20\hat i\,\text{T}\) acts on both wires.
Consider corresponding straight portions of length \(0.40\,\text{m}\). Calculate the combined resultant magnetic force and the total torque about the \(z\)-axis through the midpoint, including both mutual interactions and the external-field forces.
Both currents are then reversed simultaneously, without changing the external field.
Which option correctly gives the combined force and torque in the two arrangements?
ⓐ. Net force zero in both; initial torque \(-0.080\hat k\,\text{N m}\), final torque \(+0.080\hat k\,\text{N m}\).
ⓑ. Net force zero in both; torque zero in both because mutual magnetic forces obey Newton's third law.
ⓒ. Initial torque \(+0.080\hat k\,\text{N m}\), final torque \(-0.080\hat k\,\text{N m}\); net force zero in both.
ⓓ. Net force \(+0.80\hat j\,\text{N}\) initially and \(-0.80\hat j\,\text{N}\) finally; torque zero.
Correct Answer: Net force zero in both; initial torque \(-0.080\hat k\,\text{N m}\), final torque \(+0.080\hat k\,\text{N m}\).
Explanation: \(\textbf{Identify the mutual interaction:}\)
The currents in the two wires have opposite directions.
The wires therefore repel one another.
The force on the left wire due to the right wire points along negative \(x\).
The force on the right wire due to the left wire points along positive \(x\).
These pairwise forces are equal and opposite for corresponding lengths.
Their resultant force is zero.
Because both forces act along the line joining the wires, their combined torque about the central \(z\)-axis is also zero.
\(\textbf{Calculate the external-field force on the left wire:}\)
The left current flows along positive \(z\).
Therefore,
\[
\vec F_L=I(L\hat k\times\vec B_e)
\]
\[
\vec F_L=(5.0)(0.40\hat k)\times(0.20\hat i)
\]
\[
\vec F_L=+0.40\hat j\,\text{N}
\]
\(\textbf{Calculate the external-field force on the right wire:}\)
The right current flows along negative \(z\).
Thus,
\[
\vec F_R=(5.0)(-0.40\hat k)\times(0.20\hat i)
\]
\[
\vec F_R=-0.40\hat j\,\text{N}
\]
The external-field forces also have zero resultant.
However, their lines of action are separated.
\(\textbf{Determine the external torque about the midpoint:}\)
The left wire is at
\[
\vec r_L=-0.10\hat i\,\text{m}
\]
Its torque is
\[
\vec\tau_L=\vec r_L\times\vec F_L
\]
\[
\vec\tau_L=(-0.10\hat i)\times(0.40\hat j)
\]
\[
\vec\tau_L=-0.040\hat k\,\text{N m}
\]
For the right wire,
\[
\vec r_R=+0.10\hat i\,\text{m}
\]
\[
\vec\tau_R=(0.10\hat i)\times(-0.40\hat j)
\]
\[
\vec\tau_R=-0.040\hat k\,\text{N m}
\]
Therefore,
\[
\vec\tau_{\mathrm{total},1}=-0.080\hat k\,\text{N m}
\]
\(\textbf{Reverse both wire currents:}\)
The two currents remain antiparallel, so their mutual repulsion and its zero combined torque remain unchanged.
The independently applied external field is fixed.
Reversing both currents reverses both external-field forces.
Consequently, their couple reverses:
\[
\vec\tau_{\mathrm{total},2}=+0.080\hat k\,\text{N m}
\]
The combined resultant force remains zero.
\(\textbf{Final answer:}\)
\[
\boxed{\vec F_{\mathrm{total},1}=\vec F_{\mathrm{total},2}=\vec0,\qquad
\vec\tau_1=-0.080\hat k\,\text{N m},\quad
\vec\tau_2=+0.080\hat k\,\text{N m}}
\]
The mutual forces form an action–reaction pair directed along the line joining the wires.
They produce neither a net force nor a net torque on the two-wire system.
The uniform external field produces another pair of equal and opposite forces.
These forces act along different lines and therefore form a couple.
This example shows that zero resultant magnetic force does not necessarily imply zero resultant torque.
397. Three infinitely long parallel wires pass through \(P=(0,0)\), \(Q=(a,0)\), and \(R=(3a,0)\), where \(a\gt 0\).
Wires P and Q carry current \(I\) along positive \(z\), while wire R carries current \(I\) along negative \(z\).
Define
\[
f_0=\frac{\mu_0I^2}{2\pi a}
\]
Which option correctly gives the resultant magnetic forces per unit length on all three wires, and their total vector sum?
ⓐ. \(\vec f_P=\frac23f_0\hat i,\ \vec f_Q=-\frac32f_0\hat i,\ \vec f_R=\frac56f_0\hat i\); total zero.
ⓑ. \(\vec f_P=\frac43f_0\hat i,\ \vec f_Q=-\frac12f_0\hat i,\ \vec f_R=-\frac56f_0\hat i\); total zero.
ⓒ. \(\vec f_P=\frac23f_0\hat i,\ \vec f_Q=-\frac32f_0\hat i,\ \vec f_R=-\frac56f_0\hat i\); total nonzero.
ⓓ. \(\vec f_P=f_0\hat i,\ \vec f_Q=-f_0\hat i,\ \vec f_R=\vec0\); total zero.
Correct Answer: \(\vec f_P=\frac23f_0\hat i,\ \vec f_Q=-\frac32f_0\hat i,\ \vec f_R=\frac56f_0\hat i\); total zero.
Explanation: \(\textbf{Determine the pairwise force magnitudes:}\)
For two long parallel wires,
\[
f=\frac{\mu_0|I_1I_2|}{2\pi d}
\]
All current magnitudes are \(I\).
The separations are
\[
PQ=a,\qquad QR=2a,\qquad PR=3a
\]
Therefore,
\[
f_{PQ}=f_0
\]
\[
f_{QR}=\frac{f_0}{2}
\]
\[
f_{PR}=\frac{f_0}{3}
\]
\(\textbf{Calculate the resultant on P:}\)
P and Q have same-direction currents, so Q attracts P towards positive \(x\).
P and R have opposite-direction currents, so R repels P towards negative \(x\).
Therefore,
\[
\vec f_P=\left(f_0-\frac{f_0}{3}\right)\hat i
\]
\[
\vec f_P=\frac23f_0\hat i
\]
\(\textbf{Calculate the resultant on Q:}\)
P attracts Q towards negative \(x\).
R repels Q away from its position at \(3a\), also towards negative \(x\).
Thus,
\[
\vec f_Q=\left(-f_0-\frac{f_0}{2}\right)\hat i
\]
\[
\vec f_Q=-\frac32f_0\hat i
\]
\(\textbf{Calculate the resultant on R:}\)
R has current opposite to both P and Q.
Both therefore repel R towards positive \(x\).
The respective force magnitudes are \(f_0/3\) and \(f_0/2\).
Hence,
\[
\vec f_R=\left(\frac{f_0}{3}+\frac{f_0}{2}\right)\hat i
\]
\[
\vec f_R=\frac56f_0\hat i
\]
\(\textbf{Verify the total system force:}\)
Adding the three vectors,
\[
\vec f_{\mathrm{total}}
=f_0\left(\frac23-\frac32+\frac56\right)\hat i
\]
Taking the common denominator,
\[
\vec f_{\mathrm{total}}
=\frac{f_0}{6}(4-9+5)\hat i
\]
\[
\vec f_{\mathrm{total}}=\vec0
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec f_P=\frac23f_0\hat i,\qquad
\vec f_Q=-\frac32f_0\hat i,\qquad
\vec f_R=\frac56f_0\hat i,\qquad
\vec f_{\mathrm{total}}=\vec0}
\]
The resultant forces on individual wires have different magnitudes.
This does not contradict Newton's third law because each wire interacts with two other wires.
The force exerted by any particular pair is equal and opposite, but a wire's complete resultant includes both pairwise interactions.
Summing the forces over all three wires cancels every internal interaction.
The system can have zero total internal force even though none of its individual wires is in equilibrium.
398. Two infinitely long parallel wires pass through \(P=(-a,0)\) and \(Q=(a,0)\), where \(a\gt 0\).
Wire P carries current \(I\) along positive \(z\), while Q carries current \(I\) along negative \(z\).
Let
\[
b_0=\frac{\mu_0I}{2\pi a},\qquad
f_0=\frac{\mu_0I^2}{2\pi a}
\]
The magnetic field is examined at the midpoint \(M=(0,0)\) and at \(N=(3a,0)\).
Which option correctly gives the resultant fields at M and N and the force per unit length on P?
ⓐ. \(\vec B_M=\vec0,\ \vec B_N=-\frac14b_0\hat j,\ \vec f_P=-\frac12f_0\hat i\)
ⓑ. \(\vec B_M=2b_0\hat j,\ \vec B_N=+\frac14b_0\hat j,\ \vec f_P=+\frac12f_0\hat i\)
ⓒ. \(\vec B_M=2b_0\hat j,\ \vec B_N=-\frac12b_0\hat j,\ \vec f_P=-f_0\hat i\)
ⓓ. \(\vec B_M=2b_0\hat j,\ \vec B_N=-\frac14b_0\hat j,\ \vec f_P=-\frac12f_0\hat i\)
Correct Answer: \(\vec B_M=2b_0\hat j,\ \vec B_N=-\frac14b_0\hat j,\ \vec f_P=-\frac12f_0\hat i\)
Explanation: \(\textbf{Determine the fields at the midpoint:}\)
At M, the distance from either wire is \(a\).
Wire P carries current along positive \(z\).
At a point to its right, its magnetic field points along positive \(y\):
\[
\vec B_{P,M}=+b_0\hat j
\]
Wire Q carries current along negative \(z\).
At a point to its left, its magnetic field also points along positive \(y\):
\[
\vec B_{Q,M}=+b_0\hat j
\]
Therefore,
\[
\vec B_M=+2b_0\hat j
\]
\(\textbf{Determine the fields at the exterior point N:}\)
Point N is located at \(x=3a\).
Its distances from the two wires are
\[
PN=4a,\qquad QN=2a
\]
At N, the positive-\(z\) current in P produces field along positive \(y\):
\[
\vec B_{P,N}=+\frac{b_0}{4}\hat j
\]
The negative-\(z\) current in Q produces field along negative \(y\):
\[
\vec B_{Q,N}=-\frac{b_0}{2}\hat j
\]
Therefore,
\[
\vec B_N=\left(\frac14-\frac12\right)b_0\hat j
\]
\[
\vec B_N=-\frac14b_0\hat j
\]
\(\textbf{Determine the mutual interaction force:}\)
The currents have opposite directions.
They repel one another.
The separation between the wires is \(2a\).
Thus, the interaction-force magnitude per unit length is
\[
f=\frac{\mu_0I^2}{2\pi(2a)}
\]
\[
f=\frac12f_0
\]
P lies to the left of Q.
Repulsion therefore pushes P along negative \(x\):
\[
\vec f_P=-\frac12f_0\hat i
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec B_M=2b_0\hat j,\qquad
\vec B_N=-\frac14b_0\hat j,\qquad
\vec f_P=-\frac12f_0\hat i}
\]
Between oppositely directed currents, their magnetic fields reinforce.
Outside the pair, the fields oppose and the nearer wire can dominate the resultant direction.
The magnetic force on a wire depends on the field produced by the other wire at its own position.
It is not determined by the field at an arbitrary midpoint or exterior observation point.
The force direction is therefore consistent with repulsion even though the resultant magnetic field changes direction between M and N.
399. Two infinitely long source wires lie at \((-a,0)\) and \((a,0)\), where \(a\gt 0\).
The left source carries current \(I\) along positive \(z\), while the right source carries current \(I\) along negative \(z\).
A third, parallel wire carries current \(J\gt 0\) along positive \(z\) and passes through the point \((0,h)\), where \(h\gt 0\).
Define
\[
f_0=\frac{\mu_0IJ}{2\pi a}
\]
The test wire is moved vertically from \(h=a\) to \(h=2a\), with its current unchanged. Finally, both source currents are reversed simultaneously, while the test wire remains at \(h=2a\).
Which option correctly gives the force per unit length on the test wire at the three stages?
ⓐ. At \(h=a\): \(-f_0\hat i\); at \(h=2a\): \(-\frac25f_0\hat i\); after source reversal: \(+\frac25f_0\hat i\).
ⓑ. At \(h=a\): \(-f_0\hat j\); at \(h=2a\): \(-\frac25f_0\hat j\); after reversal: \(+\frac25f_0\hat j\).
ⓒ. At \(h=a\): \(-f_0\hat i\); at \(h=2a\): \(-\frac45f_0\hat i\); after reversal: \(+\frac45f_0\hat i\).
ⓓ. At \(h=a\): zero; at \(h=2a\): \(-\frac25f_0\hat i\); after reversal: zero.
Correct Answer: At \(h=a\): \(-f_0\hat i\); at \(h=2a\): \(-\frac25f_0\hat i\); after source reversal: \(+\frac25f_0\hat i\).
Explanation: \(\textbf{Determine the geometry of the two interactions:}\)
The test wire lies at \((0,h)\).
Its distance from either source is
\[
r=\sqrt{a^2+h^2}
\]
The left source and test wire carry same-direction currents, so they attract.
The right source and test wire carry opposite-direction currents, so they repel.
The force magnitudes due to the two sources are equal:
\[
f_1=\frac{\mu_0IJ}{2\pi r}
\]
\(\textbf{Resolve the attractive force from the left source:}\)
The displacement from the test wire towards the left source is
\[
-a\hat i-h\hat j
\]
Therefore,
\[
\vec f_L=\frac{f_1}{r}(-a\hat i-h\hat j)
\]
\(\textbf{Resolve the repulsive force from the right source:}\)
The vector directed away from the right source towards the test wire is
\[
-a\hat i+h\hat j
\]
Therefore,
\[
\vec f_R=\frac{f_1}{r}(-a\hat i+h\hat j)
\]
\(\textbf{Combine the pairwise forces:}\)
The vertical components cancel.
The horizontal components both point towards negative \(x\):
\[
\vec f_{\mathrm{net}}=\vec f_L+\vec f_R
\]
\[
\vec f_{\mathrm{net}}=-\frac{2af_1}{r}\hat i
\]
Substituting for \(f_1\),
\[
\vec f_{\mathrm{net}}
=-\frac{\mu_0IJ}{\pi}\frac{a}{a^2+h^2}\hat i
\]
Using the definition of \(f_0\),
\[
\vec f_{\mathrm{net}}
=-\frac{2a^2}{a^2+h^2}f_0\hat i
\]
\(\textbf{Evaluate the two heights:}\)
At \(h=a\),
\[
\vec f(a)=-\frac{2a^2}{2a^2}f_0\hat i
\]
\[
\vec f(a)=-f_0\hat i
\]
At \(h=2a\),
\[
\vec f(2a)=-\frac{2a^2}{5a^2}f_0\hat i
\]
\[
\vec f(2a)=-\frac25f_0\hat i
\]
\(\textbf{Reverse both source currents:}\)
Reversing both source currents reverses both magnetic-field contributions at the test wire.
The test current is unchanged.
Therefore, the complete magnetic force reverses:
\[
\vec f_{\mathrm{final}}=+\frac25f_0\hat i
\]
\(\textbf{Final answer:}\)
\[
\boxed{\vec f(a)=-f_0\hat i,\qquad
\vec f(2a)=-\frac25f_0\hat i,\qquad
\vec f_{\mathrm{final}}=+\frac25f_0\hat i}
\]
The source currents are oppositely directed, so one attracts the test wire and the other repels it.
Because of the symmetric geometry, their vertical force components cancel while their horizontal components reinforce.
Moving the test wire farther from the sources reduces the resultant force magnitude.
Reversing both source currents changes the direction of the force without changing its magnitude at the fixed final position.
400. Two infinitely long parallel wires P and Q are separated by \(0.020\,\text{m}\) in vacuum. Both carry the same unknown current \(I\gt 0\) along positive \(z\).
A separately maintained uniform magnetic field \(B_e\hat j\), where \(B_e\gt 0\), is applied.
Wire P lies to the left of Q.
Two force sensors measure the signed \(x\)-components of the resultant magnetic forces per unit length:
\[
f_{P,x}=+8.0\times10^{-4}\,\text{N m}^{-1}
\]
\[
f_{Q,x}=-1.2\times10^{-3}\,\text{N m}^{-1}
\]
Use
\[
\frac{\mu_0}{2\pi}=2.0\times10^{-7}\,\text{N A}^{-2}
\]
Determine the common current and the magnitude of the applied uniform field.
ⓐ. \(I=10\,\text{A},\ B_e=2.0\times10^{-5}\,\text{T}\)
ⓑ. \(I=10\,\text{A},\ B_e=2.0\times10^{-4}\,\text{T}\)
ⓒ. \(I=5.0\,\text{A},\ B_e=4.0\times10^{-5}\,\text{T}\)
ⓓ. \(I=20\,\text{A},\ B_e=1.0\times10^{-5}\,\text{T}\)
Correct Answer: \(I=10\,\text{A},\ B_e=2.0\times10^{-5}\,\text{T}\)
Explanation: \(\textbf{Distinguish mutual and external forces:}\)
The currents in P and Q point in the same direction, so the wires attract.
Let the magnitude of their mutual force per unit length be \(f_m\).
Because P lies to the left of Q,
\[
\vec f_{P,m}=+f_m\hat i
\]
\[
\vec f_{Q,m}=-f_m\hat i
\]
The external field points along positive \(y\).
Both wires carry current along positive \(z\).
Therefore,
\[
\hat k\times\hat j=-\hat i
\]
The external magnetic force per unit length on each wire is
\[
\vec f_e=-IB_e\hat i
\]
\(\textbf{Use both sensor readings simultaneously:}\)
The measured forces satisfy
\[
f_{P,x}=f_m-IB_e
\]
\[
f_{Q,x}=-f_m-IB_e
\]
Substituting the readings,
\[
8.0\times10^{-4}=f_m-IB_e
\]
\[
-1.2\times10^{-3}=-f_m-IB_e
\]
\(\textbf{Recover the mutual force density:}\)
Subtract the second equation from the first:
\[
8.0\times10^{-4}-(-1.2\times10^{-3})=2f_m
\]
\[
2.0\times10^{-3}=2f_m
\]
\[
f_m=1.0\times10^{-3}\,\text{N m}^{-1}
\]
\(\textbf{Recover the external force density:}\)
Adding the two sensor equations,
\[
-4.0\times10^{-4}=-2IB_e
\]
Therefore,
\[
IB_e=2.0\times10^{-4}\,\text{N m}^{-1}
\]
\(\textbf{Calculate the common current from mutual interaction:}\)
The force density is
\[
f_m=\frac{\mu_0I^2}{2\pi d}
\]
Therefore,
\[
I^2=\frac{f_md}{\mu_0/(2\pi)}
\]
Substituting,
\[
I^2=\frac{(1.0\times10^{-3})(0.020)}{2.0\times10^{-7}}
\]
\[
I^2=100\,\text{A}^2
\]
\[
I=10\,\text{A}
\]
\(\textbf{Determine the external field:}\)
\[
B_e=\frac{IB_e}{I}
\]
\[
B_e=\frac{2.0\times10^{-4}}{10}
\]
\[
B_e=2.0\times10^{-5}\,\text{T}
\]
\(\textbf{Final answer:}\)
\[
\boxed{I=10\,\text{A},\qquad B_e=2.0\times10^{-5}\,\text{T}}
\]
The mutual interaction produces equal and opposite forces on the two wires.
The uniform external field produces forces in the same direction because both wire currents are parallel.
Taking the difference of the sensor readings isolates the mutual force.
Taking their sum isolates the external-field contribution.
Both measurements are needed to distinguish these physically different causes of force.